50WQ10FN

50WQ10FN Technical Data Data Sheet N0613, Rev. B 50WQ10FN SCHOTTKY RECTIFIER Features 150℃ TJ operation Center tap configuration Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability “-A” is an AEC-Q101 qualified device This is a Pb − Free Device All SMC parts are traceable to the wafer lot Additional testing can be offered upon request           DPAK Circuit Diagram Applications       Disk drives Switching power supply Converters Free-Wheeling diodes Reverse battery protection Battery charging Maximum Ratings: Characteristics Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbol Condition VRRM VRWM VR - Max. Units 100 V Average Rectified Forward Current IF (AV) 5.5 A Peak One Cycle Non-Repetitive Surge Current 50% duty cycle @Tc=135°C, rectangular wave form IFSM 8.3ms, Half Sine pulse 130 A Electrical Characteristics: Characteristics Forward Voltage Drop* Symbol VF1 VF2 Reverse Current * Junction Capacitance IR1 IR2 CT Condition @ 5A, Pulse, TJ = 25 C @ 10A, Pulse, TJ = 25 C @ 5 A, Pulse, TJ = 125 C @ 10 A, Pulse, TJ = 125 C @VR = rated VR, TJ = 25 C @VR = rated VR, TJ = 125 C @VR = 5V, TC = 25 C fSIG = 1MHz Typ. Max. 0.75 0.85 0.61 0.72 0.002 0.4 0.77 0.91 0.63 0.74 1.00 4 mA mA 180 250 pF * Pulse width < 300 µs, duty cycle < 2%  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  Units V V 50WQ10FN Technical Data Data Sheet N0613, Rev. B Thermal-Mechanical Specifications: Characteristics Junction Temperature Storage Temperature Typical Thermal Resistance Junction to Case Approximate Weight Case Style Symbol Condition Specification Units TJ Tstg - -55 to +150 -55 to +150 C C RJC - 5.0 C/W wt - 0.39 g DPAK Ratings and Characteristics Curves TJ=125℃ TJ=25℃ TJ=25℃ Fig.1-Typical Junction Capacitance Fig.2-Typical Reverse Characteristics TJ=125℃ TJ=25℃ Fig.3-Typical Instantaneous Forward Voltage Characteristics  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  50WQ10FN Technical Data Data Sheet N0613, Rev. B Mechanical Dimensions DPAK SYMBOL A A1 b c D D1 D2 E e L L1 L2 L3 L4 Φ Θ h V Ordering Information Device 50WQ10FN 50WQ10FNTR Package DPAK (Pb-Free) DPAK (Pb-Free) Millimeters Inches Min. Max. 2.20 2.40 0.00 0.127 0.66 0.86 0.46 0.60 6.50 6.70 5.13 5.46 4.83 REF. 6.00 6.20 2.186 2.386 9.70 10.40 2.90 REF. 1.40 1.70 1.60 REF. 0.60 1.00 1.10 1.30 0° 8° 0.00 0.30 5.35 REF. Min. Max. 0.087 0.094 0.000 0.005 0.026 0.034 0.018 0.024 0.256 0.264 0.202 0.215 0.190 REF. 0.236 0.244 0.086 0.094 0.381 0.409 0.144 REF. 0.055 0.067 0.063 REF. 0.024 0.039 0.043 0.051 0° 8° 0.000 0.012 0.211 REF. Marking Diagram Where XXXXX is YYWWL Shipping 50 W Q 10 FN SSG YY WW L 2500pcs / reel 2500pcs / reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specification. = Forward Current (5A) = Configuration = Device Type = Reverse Voltage (100V) = Package type = SSG = Year = Week = Lot Number Cautions：Molding resin Epoxy resin UL:94V-0 Carrier Tape & Reel Specification DPAK SYMBOL A B C d E F P0 P P1 W Millimeters Min. 6.80 10.40 2.60 Φ1.45 1.65 7.40 3.90 7.90 1.90 15.90  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  Max. 7.00 10.60 2.80 Φ1.65 1.85 7.60 4.10 8.10 2.10 16.30 50WQ10FN Technical Data Data Sheet N0613, Rev. B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC Diode Solutions sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC Diode Solutions be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC Diode Solution assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC Diode Solutions be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC Diode Solutions. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC Diode Solutions. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations..  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com 