BAV70

BAV70 Technical Data Data Sheet N0592, Rev. B BAV70 SWITCHING DIODE Features High Conductance Fast Switching Surface Mount Package Ideally Suited for Automatic Insertion For General Purpose and Switching Plastic Material –UL Recognition Flammability Classification 94V-O This is a Pb − Free Device All SMC parts are traceable to the wafer lot Additional testing can be offered upon request      SOT-23    Schematic & Pin Configuration Mechanical Characteristics     Case: SOT-23, Molded Plastic Terminals: Plated leads Solderable per MIL-STD-202, Method 208 Mounting Position: Any Marking: A4 Maximum Ratings@TA=25°C unless otherwise specified Characteristic Reverse Voltage Symbol Limits Units VR 70 V IF 200 mA Non-Repetitive Peak Forward Surge Current @t=8.3ms IFSM 2.0 A Power Dissipation PD 225 mW RθJA 556 °C/W TJ, TSTG -55 to +150 °C Forward Current Typical Thermal Resistance, Junction to Ambient Air Junction and Storage Temperature Range Electrical Characteristics @TA=25°C unless otherwise specified Characteristic Reverse Breakdown Voltage* Symbol Min Max Units VBR 70 - V Test Condition @IF=100uA Forward Voltage* VF - Reverse Leakage Current* IR - 0.715 0.855 1 1.25 2.5 uA @IF=1mA @IF=10mA @IF=50mA @IF=150mA @VR=70V Capacitance between terminals CT - 1.5 pF VR=0V, f=1.0MHz Reverse Recovery Time trr - 6.0 ns IF=IR=10mA, IRR=0.1×IR, RL=100Ω V * Pulse width < 300 µs, duty cycle < 2% Note: 1. Device mounted on fiberglass substrate 40×40×1.5mm  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  BAV70 Technical Data Data Sheet N0592, Rev. B Ratings and Characteristics Curves  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  BAV70 Technical Data Data Sheet N0592, Rev. B Ordering Information Marking Diagram Device Package Shipping BAV70 SOT-23 (Pb-Free) 3000pcs / reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specification. A4 = Marking Code Mechanical Dimensions SOT-23 SYMBOL Millimeters Inches MIN. MAX. MIN. MAX. A A1 A2 b 0.890 0.000 0.900 0.300 1.150 0.100 1.050 0.500 0.035 0.000 0.035 0.012 0.045 0.004 0.041 0.020 c 0.076 0.170 0.003 0.007 D E E1 e e1 L L1 θ 2.650 3.050 1.190 1.400 2.100 2.550 0.950 TYP. 1.780 2.050 0.550 REF. 0.300 0.500 0° 8° 0.104 0.120 0.047 0.055 0.083 0.100 0.037 TYP. 0.070 0.081 0.022 REF. 0.012 0.020 0° 8° Carrier Tape Specification SOT-23 SYMBOL A B C d E F P P0 P1 W Min. 3.05 2.67 1.12 1.40 1.65 3.40 3.90 3.90 1.90 7.90  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  Millimeters Max. 3.25 2.87 1.32 1.60 1.85 3.60 4.10 4.10 2.10 8.30 BAV70 Technical Data Data Sheet N0592, Rev. B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC Diode Solutions sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC Diode Solutions be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC Diode Solution assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC Diode Solutions be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC Diode Solutions. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC Diode Solutions. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations..  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com 