ELECTRONICS
Positive
Thermal
Coefficent
RL600 Series
Circuit Protection
System
Specifications are subject to change without notice.
Positive Thermal Coefficent - RL600 Series
Features
1. I(hold):110~160mA
2. 600V Operating voltages
3. Radial leaded devices.
4. Very high voltage surge capabilities.
5. Available in lead-free version.
6. Fast time–to–trip
7. RoHS compliant, Lead- Free and Halogen-Free
Applications
1. Overcurrent and overtemperature
2. protection of automotive electronics
3. Hard disk drives
4. PC motherboards
5. PC peripherals
• Point-of-sale (POS) equipment
• PCMCIA cards
• USB port protection
• HDMI 1.4 Source protection
• Computers & peripherals
• General Electronics
Product Name
R
L
6
LOGO
Circuit Protection
System
0
Vmax:600V
0
-
1
1
0
Ihold:110A
Specifications are subject to change without notice.
Page:1
E
D
Positive Thermal Coefficent - RL600 Series
Dimension
E
D
E
Fig.1
Ihold
Vmax
Itrip
A
V
A
Ttrip
Imax
Rmax
Rmin
A
Ω
Ω
Package Dimensions
(mm)
Type Number
Current A
RL600-110
0.11
600
0.3
0.5
RL600-150
0.15
600
0.3
1.5
RL600-160
0.16
600
0.32
1.5
Times S
E
A
B
C
D
Circuit
Figure
E
1.5
3
14
7
14
14
5.1
6.1
0.8
Fig.1
0.15
3
12
6
14
14
5.1
6.1
0.8
Fig.1
0.15
3
10
4
14
14
5.1
6.1
0.8
Fig.1
I hold = Hold Current. Maximum current device will not trip in 25°C still air.
D
I trip = Trip Current. Minimum current at which the device will always trip in 25°C still air.
V max = Maximum operating voltage device can withstand without damage at rated current (Imax).
I max = Maximum fault current device can withstand without damage at rated voltage (V max).
R min/max = Minimum/Maximum device resistance prior to tripping at 25°C.
E
Environmental Specifications
Test
Conditions
Resistance change
Passive aging
+85°C,1000 hrs
±5%typical
Humiditty aging
+85°C,85% R.H.,168 hours
±5%typical
Thermal shock
+85°C to -40°C,20 times
±33%typical
Resistance to so vent
MIL-STD-202,Method 215
Nn change
Vibration
MIL-STD-202,Method 201
Nn change
Ambient operating conditins:-40°Cto+85°C
Maximum surface temperature of the device in the tripped state is 125°C
Circuit Protection
System
Specifications are subject to change without notice.
Page:2
RL600-160
221
190
160
146
133
117
102
88
67
TEST PROCEDURES AND REQUIREMENT
Test
Test Conditions
Accept/Reject Criteria
In still air @25
Resistance
Rmin
R
Rmax
Positive Thermal Coefficent - RL600 Series
Specified current,Vmax,25
Time to Trip
Hold Current
T
max. Time to trip(Ttirp)
30 min, at IH
No trip
Trip Cycle Life
Vmax, Imax,100 cycles
No arcing or burning
Trip Endurance
Vmax,24hours
No arcing or burning
TYPICAL TIME-TO-TRIP CHARTS @ 25°C
TYPICAL TIME-TO-TRIP CHARTS @ 25
Time-to-trip (s)
A = RL600-110
B = RL600-150
C = RL600-160
STORAGE RECOMMENDATIONS
1. Storage Temperature : -10 °C~+40°C
2. Relative Humidity : ≤ 80%RH
4. Period of Storage: 1 year.
3. Keep away from corrosive atmosphere and sunlight.
Fault current (A)
STORAGE RECOMMENDATIONS
1. Storage Temperature : -10°C~+40°C
2. Relative Humidity :
80%RH
Soldering Parameters
3. Keep away from corrosive atmosphere and sunlight.
4. Period of Storage: 1 year.
TP 20~40 S
Profile Feature
Pb-Free Assembly
Average Ramp-Up Rate(Ts max to T p)
3°C/second mac.
TP 260
Critical Zone
Ramp-up
TL 217
TL to TP
tL
60~150 s
Tsmax
200
Tsmin
Ramp-down
150
ts
Preheat 60~180 s
Preheat
-Temperature Min(Ts min)
-Temperature Max(Ts max)
-Time(Ts min to Ts max)
150°C
200°C
60~180 seconds
Time maintained above:
-Temperature(TL)
-Time(tL)
+217°C
60~150 seconds
25
t 25
C to peak
Time
Peak Temperature(Tp)
Ramp-Down Rate
Recommended reflow methods: IR, vapor phase oven, hot air oven,
N2 environment for lead-free
Recommended maximum paste thickness is 0.25mm
Devices can be cleaned using standard industry methods and
solvents.
Note 1:All temperature refer to topside of the package, measured on
the package body surface.
Note 2: If reflow temperatures exceed the recommended profile,
devices may not meet the performance requirements.
Circuit Protection
System
Time 25°C to Peak Temperature
Storage Condition
260°C
6°C/second max.
8 minutes max
0°C~35°C,70%RH
Specifications are subject to change without notice.
Page:3
Positive Thermal Coefficent - RL600 Series
TEST PROCEDURES AND REQUIREMENT
Test
Test Conditions
Accept/Reject Criteria
Resistance
In still air @25°C
Rmin≤ R≤ Rmax
Time to Trip
Specified current,Vmax,25°C
T ≤ max. Time to trip(Ttirp)
Hold Current
30 min, at IH
No trip
Trip Cycle Life
Vmax, Imax,100 cycles
No arcing or burning
Trip Endurance
Vmax,24hours
No arcing or burning
Ihold Versus Temperature
Type Number
-20℃
0℃
25℃
30℃
40℃
50 ℃
60℃
70℃
85℃
RL600-110
152
131
110
100
91
80
70
61
46
RL600-150
207
179
150
137
125
110
96
83
63
RL600-160
221
190
160
146
133
117
102
88
67
Warehouse Storage Conditions of Products
· Storage Conditions:
1. Storage Temperature: -10°C~+40°C
2. Relative Humidity:≤75%RH
3. Keep away from corrosive atmosphere and sunlight.
· Period of Storage: 1 year
Circuit Protection
System
Specifications are subject to change without notice.
Page:4
RuiLongYuan Electronics Co., Ltd.
· Reproducing and modifying information of the document is prohibited without permission from
Ruilongyuan International Inc.
· Ruilongyuan International Inc. reserves the rights to make changes of the content herein the document anytime
without notification. Please refer to our website for the latest document.
· Ruilongyuan International Inc. disclaims any and all liability arising out of the application or use of any product
including damages incidentally and consequentially occurred.
· Ruilongyuan International Inc. does not assume any and all implied warranties, including warranties of fitness
for particular purpose, non-infringement and merchantability.
· Applications shown on the herein document are examples of standard use and operation. Customers are responsible
in comprehending the suitable use in particular applications.Ruilongyuan International Inc. makes no representation or
warranty that such applications will be suitable for the specifed use without further testing or modifcation.
· The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to
human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation
equipment,aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at
their own risk and agree to fullyindemnify Ruilongyuan International Inc. for any damages resulting from such improper use or
sale.
Circuit Protection
System
Specifications are subject to change without notice.
Page:5
很抱歉,暂时无法提供与“RL600-150”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 5+1.74194
- 50+1.42442
- 250+1.11532
- 500+0.94554
- 2500+0.86994
- 5000+0.82458
- 国内价格
- 1+0.60760
- 10+0.58660
- 100+0.53620
- 500+0.51100