AS02FTE1002

Data Sheet Customer: Product: Anti-Sulfurated Thick Film Chip Resistor - AS Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: 31-Oct-16 Edition: REV.B5 VIKING TECH CORPORATION 光頡科技股份有限公司 VIKING TECH CORPORATION KAOHSIUNG BRANCH 光頡科技股份有限公司高雄分公司 WUXI TMTEC CO., LTD. 無錫泰銘電子有限公司 No.70 Guangfu N. Rd., Hukou No.248-3, Sin-Sheng Rd., Cian-Jhen Dist., Kaohsiung, No.22 Xixia Road, Machinery & Industry Park, Township, Hsinchu County 303, 806, Taiwan National Hi-Tech Industrial Development Zone Taiwan of Wuxi, Wuxi, Jiangsu Province, China Zip Code:214028 TEL:886-3-5972931 TEL:886-7-8217999 TEL:86-510-85203339 FAX:886-3-5972935•886-3-5973494 FAX:886-7-8228229 FAX:86-510-85203667•86-510-85203977 E-mail:sales@viking.com.tw E-mail:sales@viking.com.tw E-mail:china@viking.com.tw Produced by (QC) Checked (QC) Approved by (QC) Prepared by (Sales) 31-Oct-16 31-Oct-16 31-Oct-16 31-Oct-16 Susan Huang J.C. Liu J.C. Liu Accepted by (Customer) Anti-Sulfurated Thick Film Chip Resistor【AS Series】 Anti-Sulfurated Thick Film Chip Resistor ■Scope －This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. ■Features －Special construction to prevent sulfuration in a sulfur containing environment ■Construction ■Applications －High-end Computer L －Industrial Equipment D1 －Automatic Equipment Controller －Medical Equipment     W T    －High-end Multimedia Electronics －Outdoor Electronic Applications  D2  Alumina Substrate  Bottom Electrode  Top Electrode  Edge Electrode  Barrier Layer  External Electrode  Resistor Layer  Primary Overcoat  Secondary Overcoat ■Dimensions D1 D2 (mm) T (mm) (mm) (mm) Weight (g) (1000pcs) 0.60±0.03 0.30±0.03 0.23±0.03 0.15±0.05 0.15±0.05 0.150 0402 1.00±0.05 0.50±0.05 0.35±0.05 0.20±0.10 0.20±0.10 0.620 AS03 0603 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.30±0.20 2.042 AS05 0805 2.00±0.10 1.25±0.10 0.50±0.10 0.35±0.20 0.40±0.20 4.368 AS06 1206 3.10±0.10 1.55±0.10 0.55±0.10 0.50±0.25 0.50±0.20 8.947 AS10 1210 3.10±0.10 2.60±0.15 0.55±0.10 0.50±0.25 0.50±0.20 15.959 AS0A 2010 5.00±0.10 2.50±0.15 0.55±0.10 0.60±0.25 0.50±0.20 24.241 AS12 2512 6.35±0.10 3.10±0.15 0.55±0.10 0.60±0.25 0.50±0.20 39.448 Type Size (Inch) L W (mm) AS01 0201 AS02 www.viking.com.tw For detail questions, contact：sales@viking.com.tw 1 Edition : REV.B5 Revision: 31-Oct-2016 【AS Series】 Anti-Sulfurated Thick Film Chip Resistor ■Part Numbering AS 03 F T E Product Type Dimensions Resistance Tolerance Packaging Code TCR (PPM/°C) 01: 0201 02: 0402 03: 0603 05: 0805 06: 1206 10: 1210 0A: 2010 12: 2512 D: ±0.5% F: ±1% J: ±5% ■Recommend Land Pattern T: Taping Reel 1003 Power Resistance Rating E: ±100 F: ±200 : Standard L: 1/12W X: 1/10W W: 1/8W V: 1/4W O: 1/3W U: 1/2W T: 1W - : No Specified R0R0: 0Ω 0010: 1Ω 1000: 100Ω 1002: 10KΩ 2201: 2.2KΩ 1003: 100KΩ 1004: 1MΩ ■Derating Curve C B A Power ratio (%) 100 AS02 AS03 AS05 AS06 AS10 AS0A AS12 80 60 40 AS01 20 0 Type A (mm) B (mm) C (mm) AS01 0.30 0.25 0.30 AS02 0.50 0.45 0.60 AS03 0.90 0.60 0.90 AS05 1.20 0.70 1.30 AS06 2.00 0.90 1.60 AS10 2.00 0.90 2.80 AS0A 3.80 0.90 2.80 AS12 3.80 1.60 3.50 0 20 40 60 80 100 120 140 160 Ambient Temperature ( ℃ ) ■Soldering Condition IR Reflow Soldering Wave Soldering (Flow Soldering) (1) Time of IR reflow soldering at maximum temperature point 260C：10s (2) Time of wave soldering at maximum temperature point 260C：10s (3) Time of soldering iron at maximum temperature point 410C：5s www.viking.com.tw For detail questions, contact：sales@viking.com.tw 2 Edition : REV.B5 Revision: 31-Oct-2016 【AS Series】 Anti-Sulfurated Thick Film Chip Resistor ■Standard Electrical Specifications Power Rating at 70C Jumper Rated Current Item Type 1/20W AS01 (0201) Jumper: 1A Operating Temp. Range -55 ~ +125C AS03 (0603) AS05 (0805) AS06 (1206) AS10 (1210) AS0A (2010) AS12 (2512) Max. Overload Voltage 25V 50V Resistance Range ±0.5% ±1% TCR (PPM/C) ±5% - 1Ω - 10MΩ ±200 - 0Ω (