XADR-28V

XAD CONNECTOR 2.5mm pitch/Disconnectable Crimp style wire-to-wire connectors Specifications –––––––––––––––––– 2.5mm pitch grid (dual in raw) wire-to-wire connector that can mate with the socket of XAD connector (board-to-wire type). • Current rating: 3A AC, DC max. (AWG #20) • Voltage rating: 250V AC, DC max. • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/10m Ω max. After environmental testing/20m Ω max. • Insulation resistance: 500M Ω min. • Withstanding voltage: 1,500V AC/minute • Applicable wire: AWG #28 to #20 * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ––––––––––––––––––––– • Possible to mate with the existing XAD socket • Inner type contact lance • Mountable on a variety of panels • Secure lock construction 0 Recognized E60389 1 Certified LR20812 2 R9851219 (25.2) 8.15 ±0.05 10.4 Note: C and D dimensions: Refer to receptacle housing. 1 ＋0.1 0 ＋0.1 0 D C ＋0.1 0 (11.4) Panel layout and Assembly layout XAD CONNECTOR Contact Pin contact Socket contact 1.9 1.9 15.1 6.5 6.6 4.8 2.9 0.8 1.3 1.6 2.4 2.3 1.3 3.1 Model No. Pin contact Socket contact SXAM-001T-P0.6 SXA-001T-P0.6 SXAM-01T-P0.6 SXA-01T-P0.6 ― SXA-001T-P0.6L mm2 Applicable wire AWG # Insulation O.D.(mm) Pin contact Q'ty / reel Socket contact 0.08∼0.33 28∼22 0.8∼1.9 7,000 8,000 0.22∼0.5 24∼20 1.5∼1.9 7,000 8,000 0.13∼0.33 26∼22 1.3∼1.7 ― 8,000 Material and Finish Phosphor bronze, tin-plated (reflow treatment) RoHS compliance Note: Contact JST for gold-plated products. Crimping machine Crimp applicator Contact  MKS-L SXA-001T-P0.6 SXA-01T-P0.6 *MKS-SC AP-K2N  MKS-L *MKS-SC  MKS-L SXA-001T-P0.6L *MKS-SC Applicator Dies Contact Crimp applicator with dies MK/SXAM/XA-001-06 APLMK SXAM/XA001-06 SC/SXAM/XA-001-06 APLSC SXAM/XA001-06 MK/SXAM/XA-01-06 APLMK SXAM/XA01-06 SC/SXAM/XA-01-06 APLSC SXAM/XA01-06 MK/SXA-001-06L APLMK SXA001-06L SC/SXA-001-06L APLSC SXA001-06L Applicator Dies Crimping machine Crimp applicator MKS-L SXAM-001T-P0.6 AP-K2N SXAM-01T-P0.6 Crimp applicator with dies MK/SXAM/XA-001-06 APLMK SXAM/XA001-06 *MKS-SC SC/SXAM/XA-001-06 APLSC SXAM/XA001-06 MKS-L MK/SXAM/XA-01-06 APLMK SXAM/XA01-06 *MKS-SC SC/SXAM/XA-01-06 APLSC SXAM/XA01-06 Note: *Strip-crimp applicator Receptacle housing (for pin contact) 8 to 16 circuits Circuits Model No. 8 XADR-08V XADR-10V XADR-12V XADR-14V XADR-16V XADR-18V XADR-20V XADR-22V XADR-24V XADR-26V XADR-28V XADR-30V XADR-32V XADR-34V XADR-36V XADR-40V 10 N 12 H A B 5 JST 12 JST 12 2.5 H 14 16 18 2 20 Circuit No.1 identification 22 24 21.5 26 28 18 to 40 circuits 30 32 26 34 36 40 A Dimensions (mm) B C D Q'ty / bag 7.5 12.5 12.9 16.2 1,000 10.0 15.0 15.4 18.7 500 12.5 17.5 17.9 21.2 500 15.0 20.0 20.4 23.7 500 17.5 22.5 22.9 26.2 300 20.0 25.0 25.4 28.7 300 22.5 27.5 27.9 31.2 300 25.0 30.0 30.4 33.7 300 27.5 32.5 32.9 36.2 300 30.0 35.0 35.4 38.7 300 32.5 37.5 37.9 41.2 300 35.0 40.0 40.4 43.7 300 37.5 42.5 42.9 46.2 300 40.0 45.0 45.4 48.7 200 42.5 47.5 47.9 51.2 200 47.5 52.5 52.9 56.2 200 20 A B JST H 15 H Material PA 66, UL94V-0, natural (white) JST 26 5 2.5 26 10 RoHS compliance Note: C and D dimensions: Panel layout dimensions 2 Circuit No.1 identification 21.5 2 XAD CONNECTOR Plug housing (for socket contact) 8 to 16 circuits Circuits Model No. 8 XADRP-08V XADRP-10V XADRP-12V XADRP-14V XADRP-16V XADRP-18V XADRP-20V XADRP-22V XADRP-24V XADRP-26V XADRP-28V XADRP-30V XADRP-32V XADRP-34V XADRP-36V XADRP-40V B 10 A 12 2.5 3.6 11.4 14 6.8 18 20 12.0 H JST Circuit No.1 identification 16 22 24 26 28 30 18 to 40 circuits 32 34 B 36 A 2.5 40 11.4 3.6 Dimensions (mm) A B 7.5 14.7 1,000 10.0 17.2 1,000 12.5 19.7 1,000 15.0 22.2 1,000 17.5 24.7 1,000 20.0 27.2 1,000 22.5 29.7 500 25.0 32.2 500 27.5 34.7 500 30.0 37.2 500 32.5 39.7 500 35.0 42.2 500 37.5 44.7 500 40.0 47.2 500 42.5 49.7 500 47.5 54.7 250 3 6.8 12.0 Circuit No.1 identification Material H JST PA 66, UL94V-0, natural (white) RoHS compliance Q'ty / bag