SS26F

UMW R UMW SS22F THRU SS220F 20V-200V 2A Features • Metal silicon junction, majority carrier conduction • For surface mounted applications • Low power loss, high efficiency • High forward surge current capability • For use in low voltage, high frequency inverters, • free wheeling, and polarity protection applications MECHANICAL DATA • Case: SMAF • Terminals: Solderable per MIL-STD-750, Method 2026 • Approx. Weight: 27mg / 0.00095oz Absolute Maximum Ratings and Electrical characteristics Ratings at 25 °C ambient temperature unless otherwise specified.Single phase, half wave, 60Hz resistive or inductive load, for capacitive load, derate by 20 % Symbols Parameter SS22F SS24F SS26F SS28F SS210F SS212F SS215F SS220F Maximum Repetitive Peak Reverse Voltage V RRM 20 40 60 80 100 120 150 200 Maximum RMS voltage V RMS 14 28 42 56 70 84 105 140 Units V V DC Maximum DC Blocking Voltage 20 80 60 40 100 200 150 120 V Maximum Average Forward Rectified Current I F(AV) 2.0 V Peak Forward Surge Current,8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) Max Instantaneous Forward Voltage at 2 A Maximum DC Reverse Current T a = 25°C at Rated DC Reverse Voltage T a =100°C Typical Junction Capacitance （1） Typical Thermal Resistance （2） I FSM VF 50 0.55 0.70 0.85 A 0.95 0.3 3 0.5 5 IR Cj 40 A m V 80 160 RθJA 80 A ° pF Operating Junction Temperature Range Storage Temperature Range Tj -55 ~ +150 T stg C/W -55 ~ +150 °C （1）Measured at 1 MHz and applied reverse voltage of 4 V D.C °C （2）P.C.B. mounted with 2.0" X 2.0" (5 X 5 cm) copper pad areas. www.umw-ic.com 1 友台半导体有限公司 UMW R UMW SS22F THRU SS220F 20V-200V 2A Fig.2 Typical Reverse Characteristics Instaneous Reverse Current ( μA) Fig.1 Forward Current Derating Curve Average Forward Current (A) 3.0 2.5 2.0 1.5 1.0 0.5 Single phase half-wave 60 Hz resistive or inductive load 0.0 25 50 75 100 125 150 10 4 T J =75°C 10 2 SS22F/SS24F SS26F-SS220F 10 1 T J =25°C 10 0 0 Case Temperature (°C) 40 60 80 100 Fig.4 Typical Junction Capacitance 500 Junction Capacitance ( pF) 20 10 1.0 SS22F/SS24F SS26F/SS28F SS210F/SS212F SS215F/SS220F 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 T J =25°C 200 100 50 SS22F/SS24F 20 SS26F-SS220F 10 1.8 Transient Thermal Impedance（ °C /W） 60 50 SS22F-SS28F SS210F-SS220F 30 20 10 8.3 ms Single Half Sine Wave (JEDEC Method) 00 1 10 100 Number of Cycles at 60Hz www.umw-ic.com 100 10 Reverse Voltage (V) Fig.5 Maximum Non-Repetitive Peak Forward Surage Current 40 1 0.1 Instaneous Forward Voltage (V) Peak Forward Surage Current (A) 20 Percent of Rated Peak Reverse Voltage（%） Fig.3 Typical Forward Characteristic Instaneous Forward Current (A) T J =100°C 10 3 Fig.6- Typical Transient Thermal Impedance 100 10 1 0.01 0.1 1 10 100 t, Pulse Duration（sec） 2 友台半导体有限公司 UMW R UMW SS22F THRU SS220F 20V-200V 2A ORDERING INFORMATION Order Code Package Baseqty Deliverymode UMW SS22F SMAF 3000 Tape and reel UMW SS24F SMAF 3000 Tape and reel UMW SS26F SMAF 3000 Tape and reel UMW SS28F SMAF 3000 Tape and reel UMW SS210F SMAF 3000 Tape and reel UMW SS212F SMAF 3000 Tape and reel UMW SS215F SMAF 3000 Tape and reel UMW SS220F SMAF 3000 Tape and reel www.umw-ic.com 3 友台半导体有限公司