RLST23A712C

ELECTRONICS TVS/ESD Arrays RLST23A712C Series Circuit Protection System Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. TVS/ESD Arrays - RLST23A712C Series Fig.6 Fig.7 Features • 400 Watts Peak Pulse Power per Line (tp = 8/20μs) • Protects two +12V to -7V lines • Low Leakage Current • Low operating and clamping voltages • Lead Free/RoHS compliant • Solid-state silicon avalanche technology • Provides ESD protection to IEC61000-4-2(ESD): ±15kV (air discharge) ±8kV (contact discharge) Fig.6 Fig.8 Fig.7 Mechanical Characteristics Pinout and Functional Block Diagram • SOT-23 package • Molding compound flammability rating: UL 94V-0 • Packaging: Tape and Reel per EIA 481 • Lead Finish: Matte tin • RoHS Compliant 3 3 3 Applications 1 • 10/100 Ethernet • WAN/LAN Equipment • Switching Systems • Desktops, Servers, Notebooks & Handhelds • Laser Diode 2 Protection 1 • Base Stations Fig.10 4 2 1 Fig.11 3 4 Circuit Protection System 2 1 3 4 Fig.12 3 4 Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. Page:1 TVS/ESD Arrays - RLST23A712C Series Absolute Maximum Rating Rating Symbol Value Units Peak Pulse Power (tp =8/20μs) PPK 400 Watts ESD Voltage (Contact) VESD ±8 Kv ESD Voltage (Air) VESD ±15 Kv TL 260 (10 sec.) °C TJ -55 to +125 °C TSTG -55 to +150 °C Lead Soldering Temperature Operating Temperature Storage Temperature ElectrIcal CharacterlstIcs Per Lin (@ 25°C Unless Otherwise Specified) Pin3 to Pin1 /Pin2 Parameter Symbol Reverse Stand-Off Voltage Conditions VRWM MIN TYP MAX Units - - 7 V VBR IBR=1mA 7.5 - - V Reverse leakage current IR VR =7V - - 20 μA Clamping voltage (tp=8/20s) VC IPP=5A - - 10 V Off state junction capacitance CJ 0Vdc,f=1MHZ between I/O pins and GND - - 75 pF Symbol Conditions MIN TYP MAX Units - - 12 V Reverse Breakdown Voltage Pin1/Pin2 to Pin3 Parameter Reverse Stand-Off Voltage VRWM VBR IBR=1mA 13.3 - - V Reverse leakage current IR VR =12V - - 1 μA Clamping voltage (tp=8/20s) VC IPP=5A - - 20 V Off state junction capacitance CJ 0Vdc,f=1MHZ between I/O pins and GND - - 75 pF Reverse Breakdown Voltage Circuit Protection System Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. Page:2 TVS/ESD Arrays - RLST23A712C Series Characteristic Curves Circuit Protection System Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. Page:3 TVS/ESD Arrays - RLST23A712C Series Recommended Soldering Conditions Profile Feature Pb-Free Assembly Average ramp-up rate (TL to TP) 3°C/second max. Preheat -Temperature Min (TS min) -Temperature Max (TS max) -Time (min to max) (ts) TS max to TL -Ramp-up Rate Time maintained above: -Temperature (TL) -Time (tL) 150°C 200°C 60-180 seconds 3°C/second max. 217°C 60-150 seconds Peak Temperature (TP) 260°C Time within 5°C of actual Peak Temperature (tP) Ramp-down Rate Time 25°C to Peak Temperature Circuit Protection System 20-40 seconds 6°C/second max. 8 minutes max. Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. Page:4 TVS/ESD Arrays - RLST23A712C Series Package dimension SOT-23 Dimensions Inches DIM Millimeters Min Nom Max Min Nom Max A 0.035 0.040 0.044 0.89 1.00 1.12 A1 0.001 0.002 0.004 0.01 0.06 0.10 b 0.015 0.018 0.020 0.37 0.44 0.50 C 0.003 0.005 0.007 0.09 0.13 0.18 D 0.110 0.114 0.120 2.80 2.90 3.04 E 0.047 0.051 0.055 1.20 1.30 1.40 e 0.070 0.075 0.081 1.78 1.90 2.04 L 0.014 0.021 0.029 0.35 0.54 0.69 HE 0.083 0.094 0.104 2.1 2.4 2.64 Part Number Code R L LOGO S T 2 Package SOT-23 3 A Straight foot overhanging 7 1 VRWM:7/12V 2 C V= Unidirectional C= Bidirectional Ordering Information Part Number Package Min. Order Qty. RLST23A712C SOT-23 3000pcs Circuit Protection System Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. Page:5 RuiLongYuan Electronics Co., Ltd. · Reproducing and modifying information of the document is prohibited without permission from Ruilongyuan International Inc. · Ruilongyuan International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. · Ruilongyuan International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. · Ruilongyuan International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. · Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications.Ruilongyuan International Inc. makes no representation or warranty that such applications will be suitable for the specifed use without further testing or modifcation. · The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment,aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fullyindemnify Ruilongyuan International Inc. for any damages resulting from such improper use or sale. Tel: +86-755-8290 8296 Circuit Protection System Fax: +86-755-8290 8002 E-mail: jack@ruilon.com Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. Page:6