RV100M035C055ETR

http://www.capxongroup.com CapXon P r o f e s s i o n a l ELECTROLYTIC CAPACITORS Catalog 2018/2019 英屬維京群島商凱普松科技股份有限公司 台灣分公司 Capxon Technology Limited Taiwan Branch 新北市汐止區大同路二段157號5樓 5F, No. 157, Da Tung Road, Sec. 2, XiZhi Dist., New Taipei City, 22183, Taiwan R. O. C. TEL : +886-2-8692-6611 FAX : +886-2-8692-6477 / 8692-6481 E-mail: sales@capxon.com.tw 英屬維京群島商凱普松科技股份有限公司 台灣分公司－歐洲辦事處 Capxon Europe Office Schwalbenweg 11 , 72793 Pfullingen , Germany TEL : +49-151-11355795 E-mail: sales@capxon-europe.com ※ 本商品目錄所記載的內容，可能會在沒有預先通知的情況下發生更改，敬請諒解。 ※ Specifications subject to change without notice Printed in May 2018 豐賓電子（深圳）有限公司 Capxon Electronic (Shen-Zhen) Co., Ltd. 518106 廣東省深圳市光明新區公明街道塘尾社區松白路4132號(塘尾工業區) No.4132, Songbai Road, Tangwei Village, Gongming Sub-district, Guangming New District, Shenzhen City, Guangdong, China Post Code : 518106 TEL : +86-755-2717-7888 FAX : +86-755-2717-7802 E-mail: sales@capxon.com.cn 豐賓電子（深圳）有限公司－蘇州辦事處 Capxon Electronic (Shen-Zhen) Co., Ltd. – Su-Zhou Office 江蘇省蘇州市高新區錦峰路158號3樓 Room 301-2,Building 22,NO.158 Jinfeng Road,High-tech Zone,Suzhou,China TEL : +86-0512-68780980 FAX : +86-512-68780981 E-mail: sales@capxon.com.cn Aluminum Electrolytic Capacitors AEC-Q200 IATF 16949 2018/2019 Aluminum Electrolytic Capacitors Conductive Polymer Capacitors Conductive Hybrid Capacitors Contents ALUMINUM ELECTROLYTIC CAPACITORS CONTENTS PAGE 1. List of the Products���������������������������������������������������������������������002 2. Product System���������������������������������������������������������������������������005 3. Part Number System�������������������������������������������������������������������008 4. Lead Treatment���������������������������������������������������������������������������010 5. Package for SMD Type���������������������������������������������������������������016 6. Available terminal for Snap-in Type�������������������������������������������017 7. Package for Snap-in Type�����������������������������������������������������������020 8. Series Discontinued��������������������������������������������������������������������020 9. General technical information����������������������������������������������������021 10. Quality and environment������������������������������������������������������������034 11. Precautions & Guidelines�����������������������������������������������������������037 12. Individual Specification by Series����������������������������������������������044 13. Disclaimer�����������������������������������������������������������������������������������406 14. Memo������������������������������������������������������������������������������������������407 Note:1.Specification and dimensions in this catalogue are subject to change without notice. If necessary, drawing can be provided. 2.Catalogue printed in May 2018 001 List of the Products Series Sleeve Page Color Type Operating Temperature Range Features Working Voltage Capacitance Endurance Hours Conductive Polymer PL 044 Radial Very low ESR -55 to +105 ºC 2.5~16V 180~3500µF 2000 PS 047 Radial Standard -55 to +105 ºC 2.5~25V 39~3500µF 2000 PU 051 Radial Ultra low ESR -55 to +105 ºC 2.5~10V 180~3900µF 2000 PX 054 Radial Low profile -55 to +105 ºC 2.5~25V 6.8~820µF 2000 PE 057 Radial Ultra low ESR, Down size to 6.3X8 (mm) -55 to +105 ºC 2.5~16V 270~1200µF 2000 PW 058 Radial Low height 2000Hours -55 to +105 ºC 2.5V~25V 39~2500μF 2000 PH 061 Radial High Voltage/High Reliability -55 to +105 ºC 35V~100V 6.8~330µF 2000 PT 064 Radial 125 ºC Guaranteed -55 to +125 ºC 2.5~50V 22~2700µF 2000 PF 067 Radial Long Life to 5,000Hours -55 to +105 ºC 2.5~35V 10~2700µF 5000 PM 070 SMD SMD & Low profile -55 to +105 ºC 2.5~100V 4.7~560µF 2000 PD 074 SMD SMD & Large capacitance -55 to +105 ºC 2.5~100V 10~3300µF 2000 PV 077 SMD SMD & Low height -55 to +105 ºC 2.5~100V 6.8~2500µF 2000 PR 080 SMD SMD & Long Life to 5,000Hours -55 to +105 ºC 6.3~50V 10~1500µF 5000 PG 083 SMD SMD & 125 ºC Guaranteed -55 to +125 ºC 6.3~50V 10~1500µF 2000 Hybrid Conductive Polymer AS NEW 086 Radial Low ESR, High Voltage,Long Life -55 to +105 ºC 16~100V 10~560µF 3000~10000 AT NEW 088 Radial 125℃,High Reliability, High Ripple Curren -55 to +125 ºC 16~40V 27~560µF 3000 AA NEW 090 SMD Low ESR, High Voltage,High Reliability, Long Life -55 to +105 ºC 25~80V 22~330µF 10000 092 SMD 125℃,Low ESR,High Voltage,High Reliability,Long Life -55 to +125 ºC 25~80V 22~330µF 4000 EV 094 SMD 105 ºC, Standard -55 to +105 ºC 6.3~50V 0.1~1500µF 1000 LV 096 SMD 85 ºC, Standard -40 to +85 ºC 4~450V 0.1~6800µF 2000 6.3~100V 160~450V 0.1~6800µF 2.2~68µF 2000 AC NEW HV 099 SMD Wide temperature range -55 to +105 ºC -40 to +105 ºC JV 102 SMD 3000 hours life -55 to +105 ºC 6.3~50V 0.1~1000µF 3000 MV 104 SMD 5000 hours life -40 to +105 ºC 6.3~50V 0.1~1000µF 5000 SMD type CV 106 SMD 7000 hours life -25 to +105 ºC 6.3~50V 22~1500µF 7000 NV 108 SMD 5.5 ~ 10.5mm height, Non-polar -40 to +85 ºC 6.3~50V 0.1~560µF 2000 KV 110 SMD 85 ºC, Low leakage current -40 to +85 ºC 6.3~50V 0.1~330µF 1000 ZV 112 SMD 105 ºC, Low impedance -55 to +105 ºC 6.3~50V 2.2~6800µF 2000~5000 DV 115 SMD 105 ºC, Low impedance -55 to +105 ºC 6.3~100V 1~6800µF 2000~5000 SMD 105 ºC, Low impedance, LongLife -55 to +105 ºC -40 to +105 ºC 6.3~100V 160~450V 1~6800µF 2.2~68µF 2000~5000 1000~2000 Ultra-miniature type RV 118 TV 121 SMD For high temperature + 125 ºC -40 to +125 ºC 10~450V 1~330µF SS 123 Radial 5mm, Standard, 85 ºC -40 to +85 ºC 4~50V 0.1~330µF 1000 ST 125 Radial 5mm, Standard, 105 ºC -40 to +105 ºC 4~50V 0.1~220µF 1000 SA 127 Radial 5mm, Low leakage current -40 to +85 ºC 4~50V 0.1~100µF 1000 SP 129 Radial 5mm, Non-polar -40 to +85 ºC 6.3~50V 0.1~47µF 1000 SM 131 Radial 7mm, Standard, 85 ºC -40 to +85 ºC 4~63V 0.1~470µF 1000 SH 133 Radial 7mm, 85 ºC, Long life -40 to +85 ºC 4~63V 0.1~470µF 2000 SK 135 Radial 7mm, Standard, 105 ºC -40 to +105 ºC 4~63V 0.1~470µF 1000 SJ 137 Radial 7mm, 105 ºC, Long life 2000 hours -40 to +105 ºC 6.3~63V 0.1~220µF 2000 SG 139 Radial 7mm, 105 ºC, Long life 4000 hours -40 to +105 ºC 6.3~50V 0.1~470μF 4000 SL 141 Radial 7mm, Low leakage current, 85 ºC -40 to +85 ºC 6.3~50V 0.1~220µF 1000 SD 143 Radial 7mm, Low leakage current, 105 ºC -40 to +105 ºC 4~63V 0.1~100µF 1000 SN 145 Radial 7~ 9mm, Non-polar, 85 ºC -40 to +85 ºC 6.3~50V 0.1~220µF 1000 002 List of the Products Series Sleeve Page Color Type Operating Temperature Range Features Working Voltage Capacitance Endurance Hours Ultraminiature type Standard type SB 147 Radial 7mm, Non-polar, 105 ºC -40 to +105 ºC 6.3~50V 0.1~100µF 1000 SZ 149 Radial 7mm, Low impedance -55 to +105 ºC 6.3~35V 6.8~330µF 1000 SY 151 Radial 7mm, Low impedance, Long life -55 to +105 ºC 6.3~50V 1~330µF 2000 GS 153 Radial General purpose, 85 ºC GW 158 Radial 9~25mm height low profile, 85 ºC KM 161 Radial Standard, 105 ºC KW 167 Radial 9~25mm height low profile, 105 ºC -40 to +85 ºC -25 to +85 ºC -40 to +85 ºC -25 to +85 ºC -40 to +105 ºC -25 to +105 ºC -40 to +105 ºC -25 to +105 ºC 6.3~100V 160~450V 6.3~100V 160~450V 6.3~100V 160~500V 6.3~100V 160~450V 0.1~33000µF 0.47~560µF 2.2~10000µF 2.2~220µF 0.1~22000µF 0.47~560µF 2.2~10000µF 1.5~150µF 2000 2000 2000 2000 Low Impedance / ESR type KC 170 Radial Ultra Miniaturized -25 to +105 ºC 400~450V 82~220μF 3000 LL 172 Radial Low leakage current -40 to +105 ºC 6.3~63V 0.1~2200µF 2000 GL 174 Radial Low impedance and Low ESR Miniaturized -55 to +105 ºC 6.3~63V 0.47~10000µF 2000~6000 KF 177 Radial Low impedance for power supply -40 to +105 ºC -25 to +105 ºC 6.3~100V 160~450V 0.47~15000µF 0.47~330µF 2000~5000 KZ 182 Radial Low impedance -40 to +105 ºC 6.3~50V 0.47~6800µF 1000~2000 GF 185 Radial Low impedance -55 to +105 ºC 6.3V~100V 4.7~6800µF 2000~5000 For lighting LZ 188 Radial Ultra low ESR and High ripple current -40 to +105 ºC 6.3~25V 220~3300µF GH 190 Radial High temperature and Long life -55 to +105 ºC 6.3~100V 0.47~12000µF GT 196 Radial Miniaturized and Long life -40 to +105 ºC 10~100V 1~330µF FB * Radial 105℃ standard -40 to +105 ºC 6.3∼120V 0.47~22000uF 2000 FC * Radial high ripple current and Low ESR -40 to +105 ºC 6.3∼120V 0.47~22000uF 3000~6000 FD * Radial High Reliability -40 to +105 ºC 6.3∼120V 0.47~22000uF 4000~8000 FE * Radial high ripple current,Low ESR and long life -40 to +105 ºC 6.3∼120V 0.47~22000uF 5000~10000 FF * Radial Miniaturized and Long life -40 to +105 ºC 6.3∼120V 0.47~22000uF 6000~12000 FG * Radial For hing temperature +130℃，Long life -40 to +130℃ 6.3∼100V 0.47~22000uF 2000~5000 FR * Radial 105℃ standard -40 to +105 ºC 160~550V 0.47~560uF 2000 5000~10000 10000 2000 FS * Radial Miniaturized，high cost performance -40 to +105 ºC 160∼500V 0.47~560uF 3000 FT * Radial Miniaturized and Long life，Economical -40 to +105 ºC 160∼500V 0.47~560uF 6000 FU * Radial Miniaturized and Long life -40 to +105 ºC 160∼500V 0.47~560uF 10000 FW * Radial Miniaturized and Ultar Long life -40 to +105 ºC 160∼450V 1~560uF 12000~20000 FX * Radial For hing temperature +130℃，Miniaturized and Long -40 to +130℃ life 160∼450V 1~560uF 2000~5000 FH 198 Radial Low ESR and Long Life 6.3V~100V 6.8~18000µF 4000~10000 ZH 202 Radial Ultra low ESR and Long Life 6000~10000 High reliability type KL 205 Radial Long life 5,000 hours KH 208 Radial Long life 5,000~10,000 hours TH 211 Radial For high temperature +125 ºC TE 215 Radial For high temperature +130 ºC KS 218 Radial Over voltage vent operating facility -40 to +105 ºC -40 to +105 ºC 6.3V~100V 8.2~8200µF -40 to +105 ºC -25 to +105 ºC -40 to +105 ºC -25 to +105 ºC -40 to +125 ºC -25 to +125 ºC -40 to +130 ºC -25 to +130 ºC 160~400V 450~500V 10~400V 450V 10~400V 450V 10~400V 450V 3.3~330µF 2.2~180µF 6.8~3300µF 6.8~100µF 0.47~8200µF 1~47µF 2.2~4700µF 1~100µF -25 to +105 ºC 200,400W 4.7~470µF -40 to +105 ºC -25 to +105 ºC -40 to +105 ºC -25 to +105 ºC 160~450V 500V 160~450V 500V 1~330µF 4.7~120µF 1~680µF 10~68µF 5000 5000~10000 1000~3000 1000~3000 2000 6000~8000 FK 220 Radial Long life for LED and ballast FL 223 Radial Long life for LED and ballast LE 227 Radial Long life for LED lighting -40 to +105 ºC 160~450W 1~68µF KY 229 Radial Slim type -25 to +105 ºC 250~450W 12~150µF 2000 LY 231 Radial Slim type, longlife 5000hours -25 to +105 ºC 250~450W 12~150µF 5000 HY 233 Radial Slim type, longlife 10000hours -25 to +105 ºC 250~450W 12~120µF 10000 打“*”部分系列，如有需求，請聯繫我司。 　“*”If you have any requirement, please contact us for details. 003 8000~12000 12000~20000 List of the Products NP 235 Radial Non-polarized,85℃ NK 237 Radial Non-polarized,105℃ Operating Temperature Range -40 to +85 ºC -25 to +85 ºC -40 to +105 ºC -25 to +105ºC SW 239 Radial 5mm height,for audio equipment -40 to +85ºC Series Sleeve Page Color Type Features Working Voltage Capacitance Nonpolarized type 6.3~100V 160~250V 6.3~100V 160~250V 0.47~3300µF 0.47~47µF 0.47~3300µF 0.47~47µF 4~50V 0.1~470µF Endurance Hours 2000 2000 1000 For Audio Equipment Photo flash type SR 241 Radial 7mm height,for audio equipment -40 to +85ºC 6.3~50V 0.1~220µF 1000 RW 243 Radial standard,for audio equipment -40 to +85ºC 6.3~100V 0.1~33000µF 2000 NR 245 Radial Non-polar,for audio equipment -40 to +85ºC 6.3~100V 0.15~1000µF 2000 SF 247 Snap-in Photo flash equipment -20 to +55ºC 330/350V 150~1500µF 5000 times RF 248 Radial -20 to +55ºC 330/350V 100~450µF 5000 times LR 249 Snap-in 85℃，for audio equipment Photo flash equipment Large can type LP 254 Snap-in 85 ºC, Standard LU 263 Snap-in 85 ºC, Longlife 3000hours 272 Snap-in 85 ºC, Longlife 5000hours HP 280 Snap-in 105 ºC, Standard HW 290 Snap-in 105 ºC, Low Profile 15mm height HU 293 Snap-in 105 ºC, Longlife 3000hours HL 302 Snap-in Long life with low ESR LT 310 Snap-in 4 Snap-in terminals type HT 314 Snap-in 4 Snap-in terminals type LD NEW For inverter Screw large can type UB 318 Snap-in Useful life 5000hours UC 323 Snap-in Useful life 7000hours UD 329 Snap-in Useful life 10000hours UJ 334 Snap-in Useful life 5000hours UK 339 Snap-in Useful life 8000hours UL 344 Snap-in Useful life 10000hours RS 350 Screw General,useful life 12000hours RG 355 Screw Useful life 6000hours RP 359 Screw Useful life 10000hours RX 365 Screw useful life 20000hours RU 371 Screw useful life 12000hours high ripple current -40 to +85ºC 16~100V 680~33000µF -40 to +85 ºC -25 to +85 ºC -40 to +85 ºC -25 to +85 ºC -40 to +85 ºC -25 to +85 ºC -40 to +105 ºC -25 to +105 ºC 6.3~450V 500~600V 10~450V 500~600V 10~450V 500V 6.3~450V 500~550V 22~100000µF 47~1500µF 47~82000µF 47~1500µF 47~100000µF 47~1500µF 56~100000µF 47~1000µF -40 to +105 ºC 160~400V 39~390µF -40 to +105 ºC -25 to +105 ºC -40 to +105 ºC -25 to +105 ºC -40 to +85 ºC -25 to +85 ºC 10~450V 500V 10~450V 500V 16~450V 500V 33~82000µF 39~470µF 39~56000µF 47~470µF 330~82000µF 220~1500µF -40 to +105ºC 160~450V 82~2700µF -40 to +105 ºC -25 to +105 ºC -40 to +105 ºC -25 to +105 ºC -40 to +105 ºC -25 to +105 ºC -40 to +105 ºC -25 to +105 ºC -40 to +105 ºC -25 to +105 ºC -40 to +105 ºC -25 to +105 ºC 200~450V 500V 200~450V 500~630V 200~450V 500~600V 200~450V 500~550V 200~450V 500~550V 200~450V 500~550V 68~3300μF 100~1500μF 68~6800μF 56~1500μF 68~2700μF 47~680μF 82~3300μF 47~1000μF 68~2200μF 47~680μF 82~2700μF 47~680μF -40 to +85 ºC 10~100V 1800~1000000µF -40 to +85 ºC -25 to +85 ºC -40 to +85 ºC -25 to +85 ºC -40 to +85 ºC -25 to +85 ºC -40 to +85 ºC -25 to +85 ºC 160~450V 500~630V 160~450V 500~630V 160~450V 500~650V 160~450V 500V 390~39000μF 1000~10000μF 270~68000μF 100~10000µF 220~100000μF 10000~15000μF 1000~33000μF 820~10000μF 2000 2000 3000 5000 2000 2000 3000 5000 2000 2000 2000 3000 5000 2000 3000 5000 2000 2000 2000 5000 2000 RJ 375 Screw useful life 10000hours with stud -40 to +85 ºC 350~450V 1500~22000µF 2000 RY 378 Screw useful life 12000hours high ripple current with stud -40 to +85 ºC 350~450V 1500~22000µF 2000 RK 381 Screw General -40 to +105 ºC 10~100V 1000~1000000µF 2000 RL 386 Screw Long life RM 391 Screw useful life 6000hours -40 to +105 ºC -25 to +105 ºC -40 to +105 ºC -25 to +105 ºC 160~450V 500V 160~450V 500V 220~22000μF 680~8200µF 180~68000μF 330~10000µF RH 396 Screw useful life 8000hours high ripple current -40 to +105 ºC 160~450V 220~47000µF 2000 RQ 400 Screw useful life 6000hours with stud -40 to +105 ºC 160~450V 2200~47000µF 2000 RT 403 Screw useful life 8000hours high ripple current with stud -40 to +105 ºC 160~450V 2200~47000µF 2000 ※About the Aluminum Electrolytic Capacitor related to Automotive Electronics applications, please contact us. 004 5000 2000 Product System Radial type of Aluminum Electrolytic Capacitors Radial type SMD type PX PT P.054 105℃ 2000H 2.5~25WV 6.8~820μF Low profile PH P.061 105℃ 2000H 35~100WV 6.8~330μF High Voltage PS PL P.044 105℃ 2000H 2.5~16WV 180~3500μF Low height Low profile Ultra low ESR Down size PU PD P.051 105℃ 2000H 2.5~10WV 180~3900μF PF P.058 Low height P.074 105℃ 2000H 2.5~100WV 10~3300μF PE P.067 105℃ 5000H 2.5~35WV 10~2700μF PR P.057 105℃ 2000H 2.5~16WV 270~1200μF High temp. P.080 105℃ 5000H 6.3~50WV 10~1500μF Hybrid Conductive Polymer Aluminum Electrolytic Capacitors Radial type AS P.086 105℃ 3000~10000H 16~100WV 10~560μF 125℃ High Reliability SMD type AT AA P.088 125℃ 3000H 16~40WV 27~560μF P.090 105℃ 10000H 25~80WV 22~330μF 125℃ High Reliability SMD type of Aluminum Electrolytic Capacitors RV P.118 105℃ 2~5000H 6.3~450WV 1~6800μF Low ESR and Long life DV P.115 105℃ 2~5000H 6.3~100WV 1.0~6800μF Very low ESR ZV P.112 KV 105℃ 2~5000H 6.3~50WV 2.2~6800μF 85℃ 1000H 6.3~50WV 0.1~330μF Low Impedance JV P.102 105℃ 3000H 6.3~50WV 0.1~1000μF Long life HV P.099 105℃ 2000H 6.3~450WV 0.1~6800μF Long life EV P.094 105℃ 1000H 6.3~50WV 0.1~1500μF High temp. P.104 105℃ 5000H 6.3~50WV 0.1~1000μF Long life CV P.106 105℃ 7000H 6.3~50WV 22~1500μF TV P.110 Low leakage current LV P.096 85℃ 2000H 4~450WV 0.1~6800μF Non-Polarized High temp. MV PV P.077 105℃ 2000H 2.5~100WV 6.8~2500μF Long life Long life 105℃ 2000H 2.5~25WV 39~2500μF P.070 105℃ 2000H 2.5~100WV 4.7~560μF High temp. Low ESR P.047 105℃ 2000H 2.5~25WV 39~3500μF PW PM P.064 125℃ 2000H 2.5~50WV 22~2700μF P.121 NV 125℃ 1~2000H 10~450WV 1~330μF 85℃ 2000H 6.3~50WV 0.1~560μF 005 P.108 AC P.092 125℃ 4000H 25~80WV 22~330μF PG P.083 125℃ 2000H 6.3~50WV 10~1500μF Product System Radial type of Aluminum Electrolytic Capacitors Low profile(from 5mm and 7mm height) ST P.125 105℃ 1000H 4~50WV 0.1~220μF Low profile 5mm SK Long life P.135 105℃ 1000H 4~63WV 0.1~470μF SJ Low Impedance P.137 105℃ 2000H 6.3~63WV 0.1~220μF SZ Low Imp. High temp. SS P.123 85℃ 1000H 4~50WV 0.1~330μF Low profile 5mm P.131 Long life 85℃ 1000H 4~63WV 0.1~470μF Low profile 7mm Over-voltage venting specification KS SM GW P.218 105℃ 2000H 200,400WV 4.7~470μF P.158 85℃ 2000H 6.3~450WV 2.2~10000μF Low profile SH P.149 105℃ 1000H 6.3~35WV 6.8~330μF Long life SY SG P.151 105℃ 2000H 6.3~50WV 1~330μF P.139 105℃ 4000H 6.3~50WV 0.1~470μF P.133 85℃ 2000H 4~63WV 0.1~470μF Slim type General GS P.153 85℃ 2000H 6.3~450WV 0.1~33000μF Slim KY P.229 105℃ 2000H 250~450WV 12~150μF Long life LY HY P.231 105℃ 5000H 250~450WV 12~150μF P.233 105℃ 10000H 250~450WV 12~120μF High temp. KC P.170 105℃ 3000H 400~450WV 82~220μF TH Miniature Long life P.167 105℃ 2000H 6.3~450WV 1.5~10000μF Low profile High temp. KM P.161 105℃ 2000H 6.3~500WV 0.1~22000μF Long life KL KH P.205 105℃ 5000H 160~500WV 2.2~330μF For LED and ballast P.208 105℃ 5~10000H 10~450WV 6.8~3300μF FK KZ P.182 Long life 105℃ 1~2000H 6.3~50WV 0.47~6800μF KF P.177 105℃ 2~5000H 6.3~450WV 0.47~15000μF Long life GL Long life GH P.174 105℃ 2~6000H 6.3~63WV 0.47~10000μF P.190 FL 105℃ 5~10000H 6.3~100WV 0.47~12000μF LZ 130℃ 1~3000H 10~450WV 1~4700μF GF P.188 105℃ 2000H 6.3~25WV 220~3300μF P.185 Long life 105℃ 2~5000H 6.3~100WV 4.7~6800μF FH ZH P.198 105℃ 4~10000H 6.3~100WV 6.8~18000μF P.223 105℃ 8~12000H 160~500WV 1~680μF Very low Imp. P.215 P.220 105 6~8000H 160~500WV 1~330μF Low profile(from 5mm and 7mm height) P.211 125℃ 1~3000H 10~450WV 0.47~8200μF TE KW P.202 LE 105℃ 6~10000H 6.3~100WV 8.2~8200μF P.227 105℃ 12~20000H 160~450WV 1~68μF Miniature Low voltage GT P.196 105℃ 10000H 10~100WV 1~330μF Low Leakage current LL P.172 105℃ 2000H 6.3~63WV 0.1~2200μF Low profile 7mm SL P.141 85℃ 1000H 6.3~50WV 0.1~220μF Low profile 5mm Non/Bi-Polar SA NP P.127 85℃ 1000H 4~50WV 0.1~100μF 85℃ 2000H 6.3~250WV 0.47~3300μF High temp. SD P.235 Low profile 7mm SN 85℃ 1000H 6.3~50WV 0.1~220μF High temp. NK P.143 105℃ 1000H 4~63WV 0.1~100μF P.237 105℃ 2000H 6.3~250WV 0.47~3300μF 006 P.145 Low profile 5mm High temp. SB P.147 105℃ 1000H 6.3~50WV 0.1~100μF SP P.129 85℃ 1000H 6.3~50WV 0.1~47μF Product System Aluminum Electrolytic Capacitors for audio equipment SW P.239 85℃ 1000H 4~50WV 0.1~470μF Low profile 5mm SR P.241 85℃ 1000H 6.3~50WV 0.1~220μF RW Low profile 7mm P.243 85℃ 2000H 6.3~100WV 0.1~33000μF Nonpolarized Snap-in terminals NR LR P.245 85℃ 2000H 6.3~100WV 0.15~1000μF P.249 85℃ 2000H 16~100WV 680~33000μF Snap-in type of Aluminum Electrolytic Capacitors General LP Long life P.254 85℃ 2000H 6.3~600WV 22~100000μF Long life LU Long life P.263 85℃ 3000H 10~600WV 47~82000μF For invertor air conditioner LD Long life P.272 UB 85℃ 5000H 10~500WV 47~100000μF High temp. HP P.280 105℃ 2000H 6.3~550WV 47~100000μF Long life HU P.293 105℃ 3000H 10~500WV 33~82000μF Low profile HW 105℃ 2000H 160~400WV 39~390μF P.310 85℃ 2000H 16~500WV 220~82000μF High temp. UJ 105℃ 5000H 10~500WV 39~56000μF HT Long life UC P.323 85℃ 3000H 200~630WV 56~6800μF P.334 105℃ 2000H 200~550WV 47~3300μF Long life UK P.339 105℃ 3000H 200~550WV 47~2200μF P.314 105℃ 2000H 160~450WV 82~2700μF Photo flash type of Aluminum Electrolytic Capacitors Radial lead Snap-in terminals RF SF P.248 55℃ 5000times 330/350WV 100~450μF P.247 55℃ 5000times 330/350WV 150~1500μF Screw type of Aluminum Electrolytic Capacitors Low voltage RS P.350 85℃ 2000H 10~100WV 1800~1000000μF High voltage useful life 6000hours useful life 10000house useful life 12000house RG RP RU P.355 85℃ 2000H 160~630WV 390~39000μF P.359 85℃ 2000H 160~630WV 100~68000μF RJ with stud High temp. RY RK 85℃ 2000H 350~450WV 150~22000μF useful life 6000house useful life 8000house RQ P.381 High voltage with stud P.378 85℃ 2000H 350~450WV 1500~22000μF RH P.391 105℃ 2000H 160~500WV 180~68000μF 105℃ 2000H 10~100WV 1000~1000000μF P.371 85℃ 2000H 160~500WV 820~33000μF P.375 RM UD P.329 85℃ 5000H 200~600WV 47~2700μF High temp. P.302 (4 Terminal) LT P.290 HL Low life Low ESR. P.318 85℃ 2000H 200~500WV 68~3300μF RT P.400 P.403 105℃ 2000H 160~450WV 2200~47000μF 007 RX P.365 85℃ 5000H 160~650WV 220~100000μF P.396 105℃ 2000H 160~450WV 220~47000μF 105℃ 2000H 160~450WV 2200~47000μF useful life 20000house useful life 10000house RL P.386 105℃ 5000H 160~500WV 220~22000μF UL P.344 105℃ 5000H 200~550WV 47~2700μF Part Number System 1 2 3 4 5 6 7 8 9 10 1.Series 11 12 13 14 15 16 17 18 19 20 6.Height(L:mm) 2.Capacitance 7.Type 3.Capacitance tolerance 8.Lead Treatment 4.Voltage 9.Special requirement 5.Case φD (1) Series For the details, please refer to "List of the Products" on page3. (2) Capacitance Capacitance is shown in microfarads(uF) μF Code 0.1 0R1 0.47 R47 1 010 4.7 4R7 10 100 100 101 1000 102 10000 103 (3) Capacitance tolerance Tolerance% ±5 Code H Tolerance% 0to+30 Code Y ±10 K 0to+40 X ±20 ±30 -10to+30 -10to+50 -10to+20 -10to100 0to+20 -30to+0 ±15 M N Q T V W Z U S 0to+50 -5to+20 -8to+5 +5to+20 0to-20 -15to+20 -25to+20 -50to+0 -5to+30 A J E I B P L O C (4) Voltage(W.V) Voltage(W.V) 6.3 10 16 25 35 50 63 80 100 160 200 220 250 350 400 420 450 500 Code 6R3 010 016 025 035 050 063 080 100 160 200 220 250 350 400 420 450 500 (5) Case(φD) Diameter 3 4 5 6.3 8 10 12 12.5 13 14.5 16 18 20 22 25 30 35 40 42 45 51 63.5 76.2 89 100 Code A B C E F G H Z I Y J K L M N O P Q U V R S T X D (6) Height(L:mm) Description 5 Code 050 5.5 055 5.8 058 6.5 065 7 070 7.7 077 8 080 8.7 087 9 090 10 100 10.5 105 11 110 Description 20 Code 200 25 250 25.5 31.5 255 315 35 350 35.5 355 41 410 47 470 52 520 83 830 98 980 118 141 151 A18 A41 A51 (7) Type Type Code Without Lead Treatment A With Lead Treatment E (8) Lead Treatment For the details, please refer to page10-15. 008 12.5 125 14 140 16 160 Polymer P 17 170 28 27 26 Part Number System Remark: 1. If it’s without lead treatment & special requirement, after the 14th code is blank 2. If it’s with lead treatment & without require special requirement, the 17th 18th 19th 20th code is blank 3. If it’s without lead treatment, but, with special requirement, the 15th 16th code filled with 0. 4. If it’s without lead treatment, but with special requirement, also exceed 4 kinds, keystone characteristic is 4code. 24 23 22 21 14 009 1 cm 2 3 4 5 6 7 8 9 10 11 12 13 6. If it’s with led treatment, but with 1 special requirement, and it is different from former data, the 17th is 0, the 18th code is characteristic. 0 5. If it’s with lead treatment, but with 1 special requirement, only remark 17 code, latter three code is blank. 20 Y Z U Case with stud clip loop Impedance Package& Label 19 M Special Temperature characteristic Vt, Electrolyte paper solder, technics, form. 18 Code T V 17 Code Special I LC K Vent line L Life N Nude P Sleeve, tray, print, PVC sleeve Q Capacitance, Cv, Break R Ripple current S Countermeasure 16 Special Terminal Rubber Lead wire DF Electrolyte Pitch Fill glue Height requirement 15 Code A B C D E F G H 25 (9) Special & appearance requirement (The 17th, 18th, 19th, 20th code) Lead Treatment Standard D ﹤16 α L:25~35.5 1.5 1.5 Dφ F 4 1.5 dφ 0.45 5 2.0 6.3 2.5 0.5 D=16 L﹤25 and L≧40 2.0 8 3.5 L＜20 0.5 L:25~31.5 1.5 10 5.0 L≧20 0.6 13 5.0 0.6 D=18 L﹤25 and L≧35.5 2.0 16 7.5 18 7.5 D﹥18 2.0 22 10 0.8 25 12.5 1.0 Cutting & Forming Part No.Code Part No.Code CF Dφ Dφ CF CF CF Dφ Dφ Dφ Dφ Dφ Dφ KF KF KF KF Size (mm) Cutting & Forming (15th, 16th) (15th, 16th) Part No.Code Part No.Code (15th, 16th) (15th, 16th) Dφ Dφ Dφ Dφ CA Dφ CA Dφ Dφ Cutting & Forming Cutting & Forming Cutting & Forming Fig 1 Size (mm) Size (mm) Size (mm) Dφ 4 5 F±0.5 2.5 Dφ 4 FigF 15 2 Fig 1 F 2 *Length Dφ2.5 "H" 4 customized 5 Dφ 4 5 *Length "H" customized H±0.5F±0.5 F 2 2.5 Fig1 F±0.5 F 2 2.5 *Length Fig 2 "H" customized *Length "H" customized H±0.5 Dφ 4 4 4 5 5 6.3 H±0.5 F±0.5 5 3.5 5 3.5 FigF 2 2.5 3.5 Fig2 Fig 2 *Length "H" Dφ 4 customized 4 4 5 5 6.3 Dφ 4 Dφ4 44 54 5 4 6.3 5 6.3 5 8 6.3 10 H±0.5F±0.5 F 2.5 3.5 5 3.5 5 3.5 F±0.5 F 2.5 F3.5 2.5 5 3.5 7.5 3.5 5 5 3.53.5 5 5 5 3.5 Fig 1 "H" customized *Length "H" *Length customized H2±0.5 *Length "H" customized H±0.5 Fig2 Dφ 4 5 H±0.5 E±0.1 2.5 FigF 1 2 Fig 1 H2±0.5 H2±0.5 F±0.5 E 1.12 1.12 Dφ 4 5 Dφ 4 5 E±0.1 Fig1 E±0.1 H1 4 4 F 2 2.5 2.5 Dφ 4 F 5 2 H2 1.8 1.12 1.8 F±0.5 E 1.12 H1±0.5F±0.5 E 1.12 1.12 F 2 2.5 H1 4 4 E 1.12 H1 1.12 4 4 2.5max H2 1.8 1.8 Fig 2 H1 4 4 H1±0.5 H2 1.8 1.8 H1±0.5 E±0.1 H2 1.8 Dφ1.8 5 6.3 8 Fig1 2.5max 5 5 FigF 2 5 2.5max F±0.5 Fig 2 E±0.1Fig2 E 1.12 1.12 1.32 Dφ 5 6.3 8 E±0.1 Dφ 5 6.3 8 H1 48 4 4 F6.3 5 5 5 Dφ 5 F±0.5 F 5 5 5 F±0.5 F 5 H2 5 1.12 1.8 1.8 1.32 1.8 E 5 1.12 E 1.12 1.12 1.32 H1±0.5 H2±0.1 E 1.12 H1 1.12 1.32 4 4 4 4 4 H1 4 H14 44 H2 1.8 1.8 1.8 H1±0.5 H2 1.8 H21.8 1.8 1.8 1.8 1.8 Fig2H2±0.1 H1±0.5 Dφ 4 5 6.3 8 10 13 H2±0.1 F±0.5 F 1.5 2 2.5 3.5 5 5 010 *Length "H1" Dφ 4 customized 5 6.3 8 10 13 Dφ 4 5 6.3 8 10 13 H1±0.5 F±0.5 F 1.5 2 2.5 3.5 5 5 Fig1 6.3 5 6.3 6.3 13 5 7.5 5 8 5 8 8 5 5 10 7.5 10 10 7.5 7.5 16 7.5 16 16 7.5 18 7.5 18 18 7.5 22 10 22 22 10 Dφ Dφ Dφ Dφ CF F±0.5 H±0.5 F±0.5 F±0.5 H±0.5 F±0.5 H2±0.5 H±0.5 H1±0.5 E±0.1 E±0.1 F 2 2.5 EF F1.12 5 2 2.51.12 2.5 3.5 *Length "H" customized H1 4 "H" 4customized Fig E 1*Length 1.12 1.12 H2 1.8 1.8 Dφ 5 H1 4 4 3.5 5 3.5 5 Fig 2 5 7.5 F Fig 1 2 2.5 H2 1.8 1.8 Dφ 4 4 4 5 5 6.3 6.3 8 10 13 FigE 2 Dφ1.12 41.12 5 2.5 3.5 5 3.5 5 3.5 5 5 7.5 7.5 E±0.1 E±0.1 FDφ 5 2 6.3 H12 F 4 4 2.5 8 Fig *Length "H" customized Dφ F E 1.8 5 5 1.125 H2 1.8 E±0.1 F±0.5 Dφ 5 1.126.3 8 F±0.5 H±0.5 Dφ H1±0.5 EF H11.12 1.12 1.32 5 4 5 4 5 F±0.5 KF Dφ FigH1 1 Part No.Code 2.5max 4 1.81.12 4 1.81.32 4 FigE 2 H21.12 H2±0.5 Cutting & Forming Size (mm) H1±0.5 Dφ 4 5 E±0.1 H2 1.8 1.8 1.8 (15th, 16th) Dφ 5 6.3 8 E±0.1 H1 4 4 4 H1±0.5 F 2 2.5 KF H2±0.1 2.5max F Fig 2 5 5 5 H2 1.8 1.8 1.8 F±0.5 Dφ Dφ F±0.5 E 1.12 1.12 H1±0.5 H2±0.1 E±0.1 E Dφ1.12 51.12 6.31.32 8 H1 4 4 Dφ 5 5 6.3 10 13 16 18 22 2 H1 F 4 5 4 4 5 8 Dφ H2 4 51.8 6.3 8 10 13 16 18 22 25 F±0.5 Dφ 1.8 Dφ F±0.5 CA F 1.5 2 2.5 3.5 5 5 7.5 7.5 10 12 H1±0.5 CA H2 E2 1.8 1.851.3285 7.5 1.121.8 1.126.3 Dφ 4 2.5 5 3.5 10 7.5 13 1016 12.518 22 2 F 1.5 H1±0.5 H2±0.1 Dφ *Length "H1" customized F±0.5 KF F H1customized 1.5 4 2 4 2.5 4 3.5 5 5 7.5 7.5 10 12 CA *Length 2.5max Fig"H1" 2 H1±0.5 H2 1.8 1.8 1.8 *Length "H1" customized 5 6.3 8 H1±0.5 E±0.1H2±0.1 Dφ Fig H1±0.5 Dφ1 4 5 6.3 8 10 13 16 18 22 2 F 5 5 5 Dφ F±0.5 F±0.5 Dφ 4 5 6.3 3.5 Dφ F 1 1.5 2 2.5 5 5 7.5 7.5 10 12 CA Fig Dφ E 1.12 1.12 1.32 F±0.5 F 2 2.5 3.5 FA *Length "H1" customized Fig1 8 10 13 16 18 22 Dφ Dφ 4 4 5 5 6.3 6.3 H1 4 4 4 Dφ Dφ H1±0.5 F±0.5 code FB FC FD F±0.5 FB F 1.5 2 2.5 3.5 5 5 7.5 7.5 10 Dφ 4 F 5 2 6.3 2.5 3.5 FA CA H2 1.8 1.8 1.8 FC Fig H1±0.5 2 1*Length 2.5FB 3.5 "H1" code FC customized FD FB H2±0.1 F H1±0.5 Fig 2 FD code FB FC FD Dφ 4 5 6.3 FC Dφ FA F±0.5 Fig1 Dφ 4 5 6.3 8 10 13 FE F 2Fig 12 2.5 3.5 FA Fig FD F±0.5 Dφ Dφ 4 5 6.3 8 10 13 16 18 22 25 FB F DφFB 5 5 5 6.3 5 7.5 7.5 code FD FB Dφ 4 4 FC 5 5 6.3 8 10 13 FE Dφ F±0.5 F 1.5 2 2.5 3.5 5 5 7.5 7.5 10 12.5 F±0.5 CA 2.5max F±0.5 code FE FE FC FC FA Dφ Dφ F F FA 5 2 FA 5 2.5FA 5 3.5FA 5 7.5 7.5 *Length "H1" customized 2.5max Fig 2 FD FB FD FE FE Fig2 codecodeFA FB FA FC FA FDFA H1±0.5 Dφ 4 5 6.3 8 10 13 FE FE FC Dφ Fig4 1 5 6.3 8 10 13 F±0.5 Dφ Dφ F 5 5 5 Fig 2 FD F Dφ 5 54 5 5 5 6.3 7.5 57.5 7.5 7.5 2.5max Dφ Dφ 4 4 FA 5 5 6.3 8 8 10 18 code FA FA 6.3FA FE 10 13 FE 13 16 Dφ FE Dφ code FA FA F±0.5 F±0.5Fig2 F 2 FA 2.5 FA3.5 FE FE FA Dφ F 1.5 2 2.5 3.5 5 5 7.5 7.5 Dφ F 4 5 5 5 6.3 5 8 5 10 7.513 7.516 18 CK code FB FC FD FB C±0.5 K±0.5 CF code 4 4 4 4 4.5 4.5 4.5 4.5 2.5max 1.5 FA 2 FA2.5 FA3.5 FA 5 FE 5 FE7.5 7.5 FC CK Dφ K 4 4 4 4 4.5 4.5 4.5 4.5 4.5 4.5 4.5 C±0.5 K±0.5 C 4 4 4 4 4.5 Fig 2 FD Dφ 4 5 6.3 8 10 13 16 18 K 4 4 4 4.5 4.5 4.5 4.5 F±0.5 Dφ 4 5 6.3 8 10 13 FE Dφ F±0.5 F 1.5 2 2.5 3.5 5 5 7.5 7.5 Dφ CK F 5 5 5 5 7.5 7.5 F±0.5 C±0.5 K±0.5 Dφ 4 C Dφ 5 4 6.3 8 10 13 16 18 4 4 4 4.5 4.5 4 5 6.3 8 10 134.5 164.5 18 E±0.1 2.5max H2±0.5 FA 2.5FA 3.5FA 5 FA 5 FE7.5 FE F code 1.5 2 7.5 Dφ 5 1.56.3 8 2.510 13 5 4.5 16 5 4.5 18 7.54.5 22 7.5 K F 4 4 2 4 4 3.54.5 CK CK E±0.1 C H2±0.5 4 4 4 4 4.5 4.5 4.5 4.5 F 2 2.5 3.5 5 5 7.5 7.5 10 C±0.5 K±0.5 Dφ C 5 4 6.3 4 8 4 10 4 13 4.516 4.518 4.522 4.5 F±0.5 K 4 E 41.12 4 1.124 1.32 4.5 4.5 1.32 4.5 4.5 1.32 1.82 Ｆ±0.5 Dφ KA F K 2 4 2.5 4 3.5 41.32 5 4 5 4.51.32 7.5 4.57.5 4.510 4.5 Dφ H1 4 4 4 4.5 4.5 4.5 1.32 4.5 1.82 4.5 E 1.12 1.12 1.32 1.32 1.32 1.32 Ｆ±0.5 Dφ KA E±0.1 F±0.5 H2±0.5 Dφ 4 5 6.3 8 10 13 16 18 H2 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 Dφ 5 6.3 8 10 13 16 18 22 H1±0.5 H1 4 4 4 4.5 4.5 4.5 4.5 4.5 F 1.5 2 2.5 3.5 5 5 7.5 7.5 F 2 2.5 5 5 7.5 10 CK H2 1.8 1.8 3.5 1.8 1.8 1.8 1.8 7.5 1.8 1.8 H1±0.5 C±0.5 K±0.5 C 4 4 4 4 4.5 4.5 4.5 4.5 E±0.1 H2±0.5 E Dφ1.12 51.12 6.31.32 81.32 101.32 131.32 161.32 181.82 22 Ｆ±0.5 Dφ KA K 4 4 4 4 4.5 4.5 4.5 4.5 H1 F 4 2 4 2.5 4 3.54.5 5 4.5 5 4.5 7.54.5 7.54.5 10 F±0.5 H1±0.5 Ｆ±0.5 H2 E 1.8 1.121.8 1.121.8 1.321.8 1.321.8 1.321.8 1.321.8 1.321.8 1.82 Dφ KA H1 4 4 4 4.5 4.5 4.5 4.5 4.5 E±0.1 H2±0.5H1±0.5 H2 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 5 22 Dφ Dφ 5 6.3 86.3 10 8 13 1016 1318 16 22 18 F 2 2.5 3.5 5 5 7.5 7.5 10 F 2 2.5 3.5 5 5 7.5 7.5 10 KA E 1.12 1.12 1.32 1.121.32 1.321.321.32 Ｆ±0.5 Dφ KA E 1.12 1.321.32 1.32 1.32 1.82 1.32 1.82 H1 H1 4 44 4 4 4.5 4 4.5 4.54.5 4.5 4.5 4.5 4.5 4.5 4.5 H2 1.8 1.8 1.8 1.8 1.8 1.8 H2 1.8 1.8 1.8 1.8 1.81.8 1.8 1.81.8 1.8 H1±0.5 KF KF Dφ Dφ H1±0.5 H2±0.5 2.5max F±0.5 F±0.5 2.5max Lead Treatment 011 Lead Treatment Part No.Code Size (mm) Cutting & Forming (15th, 16th) F1±0.5 CR EF EF Dφ Dφ Dφ CR CR Dφ CL CL CL CL CS CS CS CS CS CS CZ CZ CZ CZ CZ CZ H2±0.5 H2±0.5 CL CR CR CL Dφ Dφ Dφ H2±0.5 H2±0.5 H2±0.5 CR Dφ Dφ Dφ F1±0.5 H1±0.5 2.5max. F1±0.5 F1±0.5 H1±0.5 2.5max. 2.5max. 2.5max. H1±0.5 H1±0.5 Dφ F±0.5 2.5max. F±0.5 F±0.5 F±0.5 H1±0.5 H2±0.5 H1±0.5 H1±0.5 H1±0.5 EF Dφ H1±0.5 H1±0.5 EF Dφ H1±0.5 H1±0.5 H1±0.5 EF EF F1±0.5 F±0.5 H1±0.5 H1±0.5 H2±0.5 H2±0.5 Dφ Dφ H2±0.5 H2±0.5 H2±0.5 Dφ H2±0.5 H±0.5 Dφ Dφ H2±0.5 H±0.5 H1±0.5 H2±0.5 H2±0.5 H1±0.5 H±0.5 H1±0.5 H±0.5 H±0.5 Dφ Dφ Dφ Dφ H1±0.5 H1±0.5 H±0.5 H1±0.5 H1±0.5 H±0.5 H1±0.5 Dφ Dφ Dφ H2±0.5 H1±0.5 H1±0.5 H±0.5 H2±0.5 H±0.5 H±0.5 H2±0.5 6.3 4 Dφ 5 46.3 58 55 5 5 F 5 55 4 5 6.3 1.2Dφ 1.2 1.2 1.2 F1 1.2 1.2 1.2 4 H1 F 4 5 5 5 44 44 4 1.8 H2 1.8 1.8 F11.8 1.2 1.2 1.2 1.8 1.8 1.8 Dφ 4 5 6.3 H1 4 4 4 F 5 5 5 H2 1.8 1.8 1.8 F1 41.2 1.2 Dφ 51.2 Dφ 44 55 6.3 6.3 Dφ 6.3 4 4 FH1 5 5 5 FF 5 52 54 1.5 2.5 H2 1.8 1.8 1.8 F1 Dφ 4 1.2 5 1.2 6.3 F1 1.2 1.2 1.2 H1 1.2 2.5 2.5 2.5 H1 4428 410 F 5 41.5 2.5 H1 4"H2" 4 Dφ 4*Length 6.3 customized H2 1.8 1.8 1.8 H1 2.5 2.5 2.5 F 1.5H2 2 1.82.5 1.8 3.5 1.8 5 Dφ2.5 "H2" 42.5 customized 5 6.3 H1 2.5 2.5 2.5 *Length *Length "H2" customized F 1.5 2 2.5 Dφ 4 5 6.3 H1 2.5 2.5 Dφ 41.5 52.5 Dφ 4 52 6.3 6.3 F 2.5 *Length "H2" customized FDφ 1.5 2 2.5 4 5 6.3 F 1.5 2 2.5 H1 2.5 2.5 2.5 Dφ F F1 H1 H2 8 5 8 1.2 5 4 1.2 1.8 8 4 5 1.8 81.2 88 53.8 54 1.8 1.2 8 1.2 2.5 43.8 4 13 1.8 2.5 51.8 2.58 3.8 8 82.5 8 3.8 3.8 8 3.8 2.5 H1 F 2.5 1.5 2 2.5 2.5 2.5 3.8 H1 2.5 2.5 2.5 2.5 *Length "H2"2.5 customized *Length "H2" customized H1 "H2" 2.5 customized 2.5 2.5 2.5 *Length Dφ 4 customized 5 6.3 8 *Length "H2" Dφ 4 5 6.3 8 10 13 F 1.5 2 2.5 3.8 F 1.5 2 2.5 3.5 5 5 H12.5 42.5 2.5 2.5 Dφ 82.5 H1 2.5 2.5 Dφ 42.5 52.5 52.5 6.3 6.3 8 *Length "H2" customized *Length "H2" customized FDφ 1.5 2 2.5 3.8 F 1.5 25 2.5 4 6.3 3.8 8 10 13 16 18 22 5 5 7.5 7.5 10 10 13 16 18 22 2.5 2.5 2.5 2.5 2.5 10 16 5 18 522 7.5 25 7.5 2.5 2.5 2.5 2.5 2.5 7.5 7.5 10 12.5 22 2.5 102.5 132.5 16 2.5 18 5 5 7.5 7.5 10 10 13 16 18 22 2.5 2.5 2.5 2.5 2.5 10 13 16 18 22 105 135 16 7.5 18 7.5 22 10 52.5 5 7.5 7.5 10 10 13 16 18 22 5 5 7.5 2.5 2.5 7.5 2.5 10 2.5 2.5 5 2.5 5 2.5 7.5 2.5 7.5 2.5 10 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 10 13 16 18 22 16 18 22 25 5 5 7.5 7.5 10 7.5 7.5 10 12.5 2.52.513 2.5 2.5 2.5 22 2.5 10 2.5 2.5 16 2.5 18 10 13 16 18 22 5510 5513 7.5 7.5 16 H1 2.5 2.5 2.5 2.5 2.5 2.5 2.5 H1 2.5 2.5 2.5 2.5 F 1.5 2.5 2 2.5 2.5 3.8 2.5 5 5 7.5 *Length Dφ "H2" 4 customized 5 "H2"6.3 8 10 13 16 *Length "H2" customized *Length "H" "H1" customized F 1.5 2 2.5 3.8 5 5 7.5 *Length "H" "H1" "H2" customized Dφ 4 5 6.3 8 10 13 16 F 1.5 2 2.5 3.8 5 5 7.5 Dφ 4Dφ 5 6.3 8 10 13 16 18 22 25 *Length 55 "H2" 6.3 88 10 Dφ 44"H" "H1" 6.3customized 10 13 13 16 16 F 1.5 2 2.5 3.5 5 5 7.5 7.5 10 12.5 FDφ 1.5 225 2.5 5510 5513 7.5 F "H2" 1.5 2.5 3.8 7.5 4 6.3 3.8 8 16 *Length "H" "H1" customized *Length *Length "H" "H1"2"H2" "H2"customized customized F "H" 1.5"H1" 2.5 3.8 5 5 7.5 Dφ 4 "H1" 5 "H2"6.3 8 10 13 16 *Length "H" customized F 1.5 2 2.5 3.8 5 5 7.5 *Length "H" "H1" "H2" customized Dφ 4 5 6.3 8 10 13 16 F 1.5 2 2.5 3.8 5 5 7.5 *Length "H" "H1" "H2" customized 88 1610 Dφ 5 446.3 558 6.3 6.3 10 1813 1322 16 1625 Dφ 4Dφ 10 13 3.8 1.52.5 223.5 2.5 2.5 7.5 F 1.5FF 2 1.5 5 53.8 7.555 7.5 55 10 7.5 12.5 *Length "H" "H1" "H2" customized *Length "H" "H1" "H2" customized *Length "H" "H1" "H2" customized H2±0.5 H2±0.5 012 7.5 7.5 10 18 10 22 2.5 2.5 2.5 7.5 2.5 10 18 22 7.5 10 18 7.5 22 10 18 18 7.5 7.5 18 22 22 10 10 22 7.5 18 7.5 10 22 10 18 7.5 22 10 18 18 7.5 7.5 22 22 10 10 Lead Treatment Taping T-1 T-2 Specification Information Code Tol. Item Code Tol. Item F F1 W W0 W1 W2 +0.4 ±0.5 / ±0.02 ±1.0 ±0.2 ±0.7 ±1.3 ±0.5 ±0.5 ±0.5 ±0.5 Max -0.2 5-7(+1) 0.45 5 9(±2) 0.5 12.7 12.7 4.6 6.35 2 3.5 18 11 9 2 11-15(±1.5) 0.5 D L d P P0 P1 F F1 W W0 W1 W2 +0.4 ±0.5 / ±0.02 ±1.0 ±0.2 ±0.7 ±1.3 ±0.5 ±0.5 ±0.5 ±0.5 Max -0.2 2 4 5-7(+1) 0.45 12.7 12.7 4.6 6.35 3.5 18 11 9 2 2.5 5-7(+1) 0.45 5 9(±2) 0.5 12.7 12.7 4.6 6.35 2.5 3.5 18 11 9 2 11-15(±1.5) 0.5 D L d P P0 P1 P2 P2 ＊: In this case, that is suitable for polymer. 013 H D0 △h +0.75 ±0.2 Max -0.5 18.5 4 1 H D0 △h +0.75 ±0.2 Max -0.5 △P t Max Max 1 1.5 △P t Max Max code Fig TB T-1 code Fig 18.5 4 1 1 1.5 TB TC 18.5 4 1 1 1.5 TC T-2 Lead Treatment Taping T-3 T-4 Specification Information Code D L Tol. ±0.5 / 6.3 Item 8 10 13 Code Tol. Item 5(+1) 7(+1) 10(+1)* 9(±2) 11-15(±1.5) 5(+1) 7(+1) 8(+1)* 11.5(+1.5)* 9(±2) 11.516(±1.5) 20-25(±1.5) 7~9(±2) 12.5-35(±1.5) 13~16(+2) 20-35(±1.5) d P P2 W W0 W1 W2 △P t Max Max Max ±0.2 ±0.7 ±1.3 12.7 12.7 5.1 6.35 2.5 18 11 9 2 18.5 4 1 1 1.5 TC 12.7 12.7 4.6 6.35 3.5 18 11 9 2 18.5 4 1 1 1.5 TD 12.7 12.7 3.85 6.35 5 18 11 9 2 18.5 4 1 1 1.5 TA 15 15 5 7.5 5 18 15 9 2 18.5 4 2 2 1.5 TA ±0.5 ±0.5 ±0.5 Max H D0 +0.75 ±0.2 -0.5 △h F +0.4 -0.2 ±0.02 ±1.0 0.45 0.5 0.6 0.5 0.5 0.45 0.5 0.6 0.6 0.5 P1 P0 L Fig T-3 0.5 0.6 0.6 0.6 0.6 0.6 F W W0 W1 W2 H H0 D0 △h +0.4 +0.75 ±0.5 / ±0.02 ±1.0 ±0.2 ±0.7 ±1.3 ±0.5 ±0.5 ±0.5 Max ±0.5 ±0.2 Max -0.2 -0.5 5-7(+1) 0.45 12.7 12.7 3.85 6.35 5 18 11 9 2 18.5 16 4 1 4 5-7(+1) 0.45 5 9(±2) 0.5 12.7 12.7 3.85 6.35 5 18 11 9 2 18.5 16 4 1 11-15(±1.5) 0.5 5(+1) 0.45 7(+1) 0.5 10(+1)* 0.6 6.3 12.7 12.7 3.85 6.35 5 18 11 9 2 18.5 16 4 1 9(±2) 0.5 11-15(±1.5) 0.5 5(+1) 0.45 7(+1) 0.5 8(+1)* 0.6 11.5(+1.5)* 0.6 8 12.7 12.7 3.85 6.35 5 18 11 9 2 18.5 16 4 1 9(±2) 0.5 11.5-16(±1.5) 0.5 20-25(±1.5) 0.6 D code d P P0 P1 P2 ＊: In this case, that is suitable for polymer. 014 △P t Max Max 1 1.5 1 1.5 1 1.5 1 1.5 code Fig TA T-4 Lead Treatment T-5 Code D L ±0.5 / 13 Item 16 18 d P P1 P0 P2 ±0.02 ±1.0 ±0.2 ±0.7 ±1.3 13~16(±2) 20~35(±1.5) 16~21(±2) 25~35.5(±1.5) 16~21(±2) 25~31.5(±1.5) 35.5(±2) 0.6 0.6 0.8 0.8 0.8 0.8 0.8 25.4 30 30 12.7 12.7 15 15 15 15 15 3.85 3.85 3.75 3.75 3.75 3.75 3.75 6.35 6.35 7.5 7.5 7.5 7.5 7.5 5 TA 2 TB 2.5 TC W W0 W1 ±0.5 ±0.5 ±0.5 18 18 18 18 18 18 18 15 15 15 15 15 15 15 3.5 TD 7.5 TE Code (15th, 16th) Package Information W 227 227 227 227 191 227 191 190 227 Ammo Package A Quantity (pcs) 51 2500 51 2000 51 1500 51 800 57 800 51 600 57 500 60 500 51 300 Ammo Package H D0 +0.75 ±0.2 -0.5 18.5 4 18.5 4 18.5 4 18.5 4 18.5 4 18.5 4 18.5 4 Max 2 2 2 2 2 2 2 F Code (15th, 16th) F Size φDxL(mm) 4xall 5xall 6.3xall 8x5~16 8x17~25 10x7~15 10x16~20 10x21~25 13x13~15 9 9 9 9 9 9 9 W2 △h △P t Max Min Max 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1.5 1.5 1.5 1.5 1.5 1.5 1.5 code Fig TA TA TE TE TE TE TE T-5 Part Number Reel Package Part Number Ammo Package F Code (15th, 16th) F +0.4 -0.2 5 5 7.5 7.5 7.5 7.5 7.5 Size φDxL(mm) 13x16~20 13x21~25 13x26~30 16x16~20 16x21~25 16x26~30 16x31~35.5 18x16~25 18x26~35.5 W 191 190 216 191 216 254 230 260 260 SMD TR 5 RA Ammo Package A Quantity (pcs) 57 300 60 300 64 300 57 200 64 200 67 250 71 250 61 200 71 200 Reel Package 015 2 RB Radial 2.5 RC Size φDxL(mm) 4xall 5xall 6.3xall 8x5~17 8x18~28 10x7~17 10x18~28 13x13~17 13x18~28 16x13~17 16x18~28 3.5 RD 7.5 RE Reel Package AW Quantity (pcs) 45 1800 45 1300 45 1000 45 800 55 800 45 600 55 600 45 300 55 300 45 200 55 200 Package for SMD Type Carrier tape Unit: mm φD W P F A1 B1 T2 4x5.5 12.0 8.0 5.5 4.7 4.7 5.7 5x5.5 12.0 12.0 5.5 5.7 5.7 5.7 5x5.8 12.0 12.0 5.5 5.7 5.7 6.1 6.3x6.1 16 12 7.5 7 7 6.2 6.3x5.5 16.0 12.0 7.5 7.0 7.0 5.7 6.3x5.8 16.0 12.0 7.5 7.0 7.0 5.7 6.3x7.7 16.0 12.0 7.5 7.0 7.0 8.0 8x6.5 16 12 7.5 8.7 8.7 7.0 8x7.7 16 12 7.5 8.7 8.7 8.2 8x8.7 24.0 16.0 11.5 8.7 8.7 11.0 φD W P F A1 B1 T2 8x10.5 24.0 16.0 11.5 8.7 8.7 11.0 8x11.7 24.0 16.0 11.5 8.7 8.7 13.0 10x8.7 24 16 11.5 10.7 10.7 11.0 10x10.5 24.0 16.0 11.5 10.7 10.7 11.0 10x12.4 24.0 16.0 11.5 10.7 10.7 12.9 12.5x14 32 24 16 13.9 13.9 14.5 16x17 44 28 21.95 17.5 17.5 17.3 16x21.5 44 32 22 17.5 17.5 23 18x16.5 44 32 22 19.9 19.9 17.5 18x21.5 44 32 22 19.9 19.9 23 Reel Dφ 4 5 6.3, 8 8, 10 12.5 16 18 A 14 14 18 26 34 46 46 φD 4x5.5 5x5.5 5x5.8 6.3x6.1 6.3x5.5 6.3x5.8 6.3x7.7 8x6.5 8x7.7 8x8.7 016 Quantity 2000pcs 1000pcs 1000pcs 1000pcs 1000pcs 1000pcs 900 pcs 1000pcs 700pcs 500pcs φD 8x10.5 8x11.7 10x8.7 10x10.5 10x12.4 12.5x14 16x17 16x21.5 18x16.5 18x21.5 Quantity 500pcs 400pcs 500pcs 500pcs 400pcs 200pcs 125pcs 100pcs 125pcs 100pcs Available terminal for Snap-in Type Snap-in terminal Type Terminal Type Terminal code Unit: mm D=Φ22 to Φ45 Standard PP Standard H:6.0±1mm. Also available H:4.0±1mm. D=Φ30 to Φ45 Vibration proof (T type) CP Standard H:4.5±1mm. Also available H:5.5±1mm. D=Φ30 to Φ45 Vibration proof (U type) HP Standard H:6±1mm. 017 H h 6 2.5 4 1.5 Available terminal for Snap-in Type Terminal Type Terminal code Unit: mm D=Φ30 to Φ45 Lug Type VP Standard H:6±1mm. Also available H:5.0±1mm & H:12.0±1mm. D=Φ22 to Φ45 Long terminal for Left bending (CL) TP Standard H:2.5±1mm. D=Φ22 to Φ45 Long terminal for right bending (CR) TP Standard H:2.5±1mm. 018 Available terminal for Snap-in Type Terminal Type Terminal code Unit: mm D=Φ22 to Φ45 Slim terminal LP Standard H:9.5±1mm. Also available H:4.0±1mm. D=Φ22 to Φ45 3 pins terminal ZP Standard H:4.0±1mm. H h 4 1.5 6 2.5 4 1.5 D=Φ30 to Φ45 4 pins terminal YP Standard H:6.0±1mm. Also available H:4.0±1mm. 019 H h Package for Snap-in Type Package for Snap-in type Packing of Snap-in Packing Capacitor diameter D(mm) 20 22 22 25 25 30 30 30 35 35 35 35 40 40 40 40 40 45 45 Length L(mm) all ＜55 ≧55 ＜65 ≧65 ≤36 35≤L≤65 ＞65 ≤25 25＜L＜45 45≤L≤85 ＞85 35 35 40≤L≤45 45＜L≤75 ＞75 40≤L≤65 65＜L≤105 Terminal length H(mm) / / / / / ＜6(L=35、36) ≧6(L=35、36) / / / / / ＜6 ≧6 / / / / / Each carton packing Qty units(pcs.) 720 600 400 500 400 400 300 200 400 300 200 100 200 160 160 120 80 140 70 Box/carton units(pcs.) 6 6 4 5 4 8 6 4 8 6 4 2 5 4 4 3 2 4 2 Each box packing Qty units(pcs.) 120 100 100 100 100 50 50 50 50 50 50 50 40 40 40 40 40 35 35 Series Discontinued The following series are discontinued. Please use the replacement in the table. ▼RADIAL TYPE REPLACEMENTS Discontinued series Characteristics Replacements Page GR 85℃ standard GS 153 BP Bi-polarized Cancel ▼SNAP-IN TYPE REPLACEMENTS Discontinued series Characteristics Replacements Page LS 85℃ standard LP 254 HS 105℃ standard HP 280 *Please contact us. Already been discontinued products are not listed in this catalog. 020 General technical information Screw 1 Guide of Aluminum Electrolytic Capacitors. 1.1 Construction of Capacitors. When voltage V is applied between both conducting electrodes place, a certain amount charge Q will be stored in dielectric surface by a proportional relative voltage. The proportional constant C is designating the ability of the capacitor store energy in electric field. The basic construction is as Figure 1: C=Q / V C: Capacitance (F) Q: Charge (C) V: Voltage (V) Figure 1 Formula of Capacitance of Capacitor C =ε0 *ε* A/d C : Capacitance (F) ε0: Absolutely Permittivity (=8.85*10^ -12 F/m) ε : Relative Permittivity A : Surface of Capacitor Electrode (m2) d : Space of Electrode (m) The relative dielectric constant of the aluminum oxide membrane is 7 to 8, in order to obtain a larger capacitance, A surface area A can be increased or decreased thickness B. Electrolytic capacitor comprising of two conductive electrodes, an anode (positive foil) and cathode (negative foil) electrodes. An insulating layer is requested to separate both electrodes. Anode if formed by an enlarged surface area of aluminum foil, Oxide membrane (Al2O3) will become an insulating layer on the foil Surface. Compared with other material of capacitors, cathode electrode is in charge of conductive liquid, so called electrolyte. Cathode foil is in charge of passing current to the electrolyte. Figure 2 Cutting Construction of Aluminum Electrolytic Capacitor. Dielectric Anode Foil Oxide Membrane Cathode Foil Paper Figure 2 021 Cathode Oxide Membrane (Al2O3) General technical information 1.2 Equivalent Circuit of Capacitor Figure 3: Electrical Equivalent Circuit of Aluminum Electrolytic Capacitor Figure 3 R1: Resistance of Terminal and Electrode R2: Resistance of Anode Oxide Layer and Electrolyte R3: Insulation Resistance of Defective Cathode Oxide Membrane D1: Oxide Semiconductor of Cathode Oxide Membrane C1: Anode Foil Capacitance C2: Cathode Foil Capacitance L: Inductance by Terminals and Electrodes. 1.3 Structure of Aluminum Electrolytic capacitor Winding of Element Snap-in Type 2 Definitions of Electrical Parameters 2.1 Voltage 2.1.1 Rated Voltage Rated voltage means DC voltage and covering the peak voltage value (including pulse voltage) which may be applied continuously to a capacitor in the specified temperature range. 2.1.2 Operating Voltage Operating voltage is covering applied continuously rated voltage to a capacitor (including superimposed AC voltage) within specified temperature range. 2.1.3 Surge Voltage Surge voltage is the maximum voltage which applied to the capacitor value in a short period. Surge voltage is defined by JIS C 5101 as below: VR ≤ 315 V : VS= 1.15 multiple VR VR > 315 V : VS = 1.10 multiple VR 022 General technical information 2.1.4 Ripple Voltage Voltage applied is a combination of DC and AC voltage in many product applications. Please note the following: DC and AC voltage superimposed voltage value must less than rated voltage Reverse voltage is not allowed. Applied ripple current must less than rated ripple current 2.1.5 Recovery Voltage Recovery voltage is after the capacitor be discharging, a voltage between 2 terminals will be appear after some times. Once recovery voltage is present, sparking may scare the operators during assembly, and low voltage components may also be affected. To prevent this kind of affection, use a 100Ω~1KΩ resistor to discharge the voltage and covered with a tin foil with short-circuit on 2 terminals. 2.2 Capacitance 2.2.1 AC/DC Capacitance In most product applications (e.g. filtering or coupling), is typically measuring AC impedance (considering the amplitude and phase) to get the AC capacitance value. AC capacitor is considering with frequency and temperature, JIS C 5101 defined the test frequency of 100 Hz or 120 Hz, test temperature at 20 °C. 2.2.2 Calculation of Capacitance The capacitance of anode foil dielectric portion can be calculated by the following formula: ɛ: Relative Permittivity A: Anode Surface of Capacitor (m2) d: Space of Electrode(m) Cc of the cathode foil is determined by the characteristics of oxide membrane. And it can be generated from a forming voltage or generated by natural growth during storage. (Typically the cathode foil oxide membrane acceptance voltage is less than 1V). The structure of aluminum electrolytic capacitors, Ca and Cc are connected together by series, so the total capacitance of the capacitor can be calculated by the following formula: 2.2.3 Rated Capacitance Rated capacitance is a value by designed and marked on the capacitor. 2.2.4 Tolerance of Capacitance Capacitance tolerance is the deviation from the scope of the actual rated capacitance distribution of the capacitor. Usually the tolerance of the standard is +20% (M), however, a tolerances +10% (K), and other special requirements of the capacitor tolerance can be also manufactured. 2.2.5 Temperature Characteristics of Capacitance The capacitance of aluminum electrolytic capacitor will be affect with different temperature, the viscosity of electrolyte increased thus reducing the conductivity and capacitance when the temperature is decrease. The typical characteristic is as Figure 4: 023 General technical information Figure 4 Cs Reference value by temperature characteristic at 20°C and 120 Hz 2.2.6 Frequency Characteristics of Capacitance Capacitance is about to the temperature and the test frequency. As the test frequency increases, the capacity decreases. Typically frequency characteristic curve is as Figure 5. C: Capacitance Unit : F f : Frequency Unit : Hz Z : Impedance Unit : Ω 100Hz 1000Hz Figure 5 Capacitance C: Versus Frequency f: Typical Behavior 2.3 Dissipation Factor (Tan δ), DF Value Dissipation factor is the ratio of equivalent series resistance (ESR) to the capacitive reactance (1/ωC) in the equivalent series circuit. Aluminum electrolytic capacitors simplified equivalent circuit is as Figure 6. Tan δ and 1/ωC, ESR series connection is as Figure 7 and by the following formula: Figure 6 Figure 7 024 General technical information Where: ESR at 120Hz ω=2πf f =120HZ C: Series Capacitance (F) DF (Tanδ) measured at 120Hz and 20 °C. Tanδ becomes larger by measuring frequency increase (Figure 8), and test temperature decrease (Figure 9). Figure 8 Figure 9 2.4 Equivalent Series Inductance - ESL Equivalent series inductance represents the inductive part of the capacitors (lead terminal and internal foil). ESL is mainly affective by the frequency. The equivalent series circuit is as Figure 6. 2.5 Equivalent Series Resistance - ESR ESR represents the losses of the capacitors. The equivalent series circuit is as figure 6. ESR is connected in series with the capacitance in the equivalent circuit. The ohm resistance of ESR is come from of electrode foil, electrolyte, the lead resistance and each internal resistance connection. ESR decreases with increasing temperature, and also decreases with increasing frequency at low frequency. 2.6 Impedance Z The impedance Z is the resistance which opposes the flow of alternating current in the particular frequency. It is related to capacitance and inductance which corresponds to the capacitive and inductive reactance, and also relevant with equivalent series resistance (ESR). Specific expression is as following. XC: Capacitance CS Capacitive Reactance of 1/ωCS: 1/2πf*C XL: Inductive Reactance ωESL of Capacitor Winding and Terminals: 2πf*ESL A typical impedance versus frequency curve is as following. The minimum impedance appears at resonant frequency and it will be equal to the ESR at same frequency. 025 General technical information Figure 10 Impedance vs ESR vs Frequency 2.7 Leakage Current When a DC voltage is applied through 2 terminals of the electrolytic capacitor, a small amount of current is allowed to flow into dielectric of oxide membrane. This small amount of current is called leakage current (LC). 2.7.1 Time and Temperature Characteristics of Leakage Current As figure 11, there is a big leakage current (inrush current) flow through when capacitor is applied with voltage. With time extend, the leakage current will decrease into a stable leakage current. Thus, the leakage current (LC) is presented after a few minutes when a rated voltage is applied at temperature 20°C. Leakage current temperature characteristics is as figure 12, larger LC at high temperature; smaller LC at low temperature. Figure 11 Time vs Leakage Current Figure 12 Temperature vs Leakage Current 2.7.2 Voltage Characteristics of Leakage Current The effective value between leakage current and voltage of ambient temperature as figure 13. Figure 13 Leakage Current vs Voltage 026 General technical information 2.7.3 Acceptance Test of Leakage Current According to JIS-C-5101, following is the formula of leakage current test value after 5 minutes rated voltage applied at temperature 20 °C. 2.7.4 The behavior of leakage current without voltage applied (non voltage storage) Oxide membrane will be not recover thus performance reduce in a high temperature when voltage is not applied to the 2 terminals of aluminum electrolytic capacitors due to no leakage flow oxygen ions into anode foil. The leakage current will be rise back when a long time store with non voltage applied. Please operate of capacitors over than 1 hour after an expired storage (6 months) before using in the circuit. This action will help oxide membrane recover and can be stored again. 3 Ripple Current 3.1 General Ripple current is alternating current which flowing through the capacitors. Each capacitor is designed by a rated ripple current which operated under a rated operating temperature to control internal temperature of capacitors. The maximum allowable ripple current depends on the ambient temperature, capacitor surface area (thermal area), dissipation factor tanδ (or ESR) and alternating current frequency. ESR of aluminum electrolytic capacitor will effect with frequency in a fixed voltage. Thus, ripple current is also effective with frequency. In the most product applications, more than one frequency of ripple current could be found. In this case, we have to consider RMS of ripple current because of self-heating of capacitors is come from the combination of all ripple current of frequency as formula below: Ir: RMS Value of Ripple Current If1…Ifn: RMS Value of Ripple Current at Frequency f1…fn Ff1…Ffn: Correction Factor of Ripple Current at Frequency f1….fn Where fo= Reference Frequency of Nominal Ripple Current 3.3 Temperature Dependence of Ripple Current Capacitance of each series is given the maximum allowable ripple current under the rated temperature in category. 4 Useful Life Useful Life (also referred to service life and operating life) is defined as the life achieved by the capacitor without exceeding the specified failure rate. The total failure or failure due parametric variation is considered to constitute the end of the useful life. Depending on the circuit design, as a failure result does not mean device failure due to parameters variation. Instead, it may consider the actual useful life will longer than the specified useful life. Useful life is given by operating experience and accelerated aging test result. If the load is less than the rated value, useful life can be extended (E.g., lower operating voltage, current, and ambient temperature). In addition to the specified life range in category, CapXon is able to offer special useful life according to customer requested. 027 Screw 3.2 Frequency Dependence of Ripple Current General technical information 4.1 Load Conditions Conditions of load useful life Rated Voltage (the peak value of AC voltage superimposed on DC voltage should not be higher than rated voltage) Rated Ripple Current Rated Temperature 4.2 Operating Useful Life Capacitor’s operating useful life is calculated from each series expectation useful life. To learn more about useful life information as below: To calculate the ratio. To find the intersection of calculated ratio and operating temperature. To see the useful life value from the intersection of graph curve. Above process does not consider the frequency characteristic of ripple current. Equivalent ripple current is calculated from the frequency corresponding to the conversion factor. The following example illustrates the calculation procedure to use the data of a capacitor of RH series Screw VR CR Case IR max 120Hz 105°C (A) 450 2200 63.5X120 9.2 Figure 14 028 General technical information E.g. 1- Calculation of Useful Life The following values are used to determine the frequency conversion. The corresponding useful life can be calculated. Ripple Current: 25 A Frequency: 400 Hz Ambient: 60°C CapXon General CapXon General technical technical information information CapXon General technical information Equivalent ripple current at 120Hz frequency converts calculations (see RH series allowable ripple current IRC CapXon General technical information ΙΙ 20 Α = 20 Α ≈ 2 . 1 RC RC ≈ 2 .1 frequency) Ι Ι ΙRC= 9 . 520 20ΑΑ ≈ 2 . 1 .R =. 5 Α Ι RC Α RC . R RC 9= ≈ 2 .1 Ι 9 .5 Α RC . R The through 9 . 5 Αthe RC . R through The useful useful life life curve curve Ιpassing passing the coordinates coordinates for for the the ripple ripple current current factor factor and and the the ambient ambient The useful lifethe curve passing through the coordinates for the ripple and current factor and the ambient To calculate ratio of the actual value of the ripple current specification values. temperature (50 °C) indicates the useful life that can be expected:100 000 h (see figure 8). The useful life curve passing through the coordinates for the ripple current factor and the ambient temperature (50 °C) indicates the useful life that can be expected:100 000 h (see figure 8). temperature (50 °C) indicates the useful life that can be expected:100 000 h (see figure 8). Example 2 ripple current on an electrolytic temperature (50 °C) the indicates usefulload life that be expected:100 000 h capacitor (see figure 8). Example 2– – Checking Checking the ripplethe current load on can an Aluminum Aluminum electrolytic capacitor Example 2 – Checking the ripple current load on an Aluminum electrolytic capacitor Example 2 – Checking the ripple current load on ansubjected Aluminum ripple electrolytic capacitor In In many many applications, applications, Aluminum Aluminum electrolytic electrolytic capacitors capacitors are are subjected to to ripple currents currents of of varying varying Ripple current ratio and ambient temperature (60°C) on the intersection of the graph says the useful life is 100,000 In many applications, Aluminum electrolytic capacitors are subjected to ripple currents of varying frequencies. In many applications, Aluminum electrolytic capacitors are subjected to ripple currents of varying frequencies. hours (Figure14). frequencies. frequencies. E.g. 2- Calculation of Ripple Current on Aluminum Electrolytic Capacitor = 16 Α 1.25 16 Α .25 12 . 12 Α Current II2:: 16 Α1≈ Current CurrentI2: 2 16 ≈Α12 . 12 Α 1 . 32 Current I2:1 . 3216 Α≈ 12 . 12 Α Current I2: 1 . 32 ≈ 12 . 12 Α . 32 ΙΙ total .RMS = ΙΙ1 2 1+ Ι 2 2 = (16 )2 + (12.12 )2 ≈ 20.07 Α total .RMS = 1 +2Ι 2 =2 (16 ) +2(12.12 ) ≈2 20.07 Α Ι total .RMS = Ι1 2+ Ι 2 2 = (16 ) 2+ (12.12 ) 2 ≈ 20.07 Α (16 ) + (12.12 ) ≈ 20.07 Α Ι total .RMS = Ι1 + Ιcan 2 = The ripple current factor then be calculated 2 2 2 2 The ripple current factor can then be calculated The ripple current factor can then be calculated current Current factor canFactor: then be calculated Calculation of Ι The ripple 23Ripple .38Α . RMS Ι total total . RMS = 23.38 Α ≈ 2.11Α = 9.23 Ι total . RMS .38≈ Α2.11Α ΙΙ RC Α Ι 20 07Α≈ 2.11Α . R . RMS = 9=.5523 Α..38 RC .total R 9.5Α ≈ 2.11Α Ι RC . R 99..55Α Ι RC . R The The useful useful life life curve curve passing passing through through the the coordinates coordinates for for the the ripple ripple current current factor factor and and the the ambient ambient The useful life curve passing through the coordinates for the ripple current factor and the ambient Ripple current ratio and ambient temperature (60°C) on the intersection of the graph says the useful life is 100,000 temperature (50 °C) indicates the useful life that can be expected:100 000 h (see figure 8) The useful life curve passing through the coordinates for the ripple current factor and temperature (50 °C) indicates the useful life that can be expected:100 000 h (see figure 8)the ambient temperature (50 °C) indicates the useful life that can be expected:100 000 h (see figure 8) hours (Figure14). 6.1 Parallel of electrolytic capacitors (50 °C) indicates the useful life that can be expected:100 000 h (see figure 8) 6.1 temperature Parallel connection connection of Aluminum Aluminum electrolytic capacitors 6.1 Parallel connection of Aluminum electrolytic capacitors 6.1 the Parallel connection of Aluminumfails electrolytic capacitors If If one one of of the capacitors capacitors in in a a parallel parallel circuit circuit fails as as a a result result of of an an internal internal short short circuit, circuit, the the entire entire If one of theofcapacitors in a parallel circuit failsCapacitor as a result of an internal short circuit, the entire 5 Connection Aluminum Electrolytic bank is discharged through the defective capacitor. In the case of large banks with high energy If one of the capacitors in a parallel circuit fails as a result of an internal short circuit, the entire bank is discharged through the defective capacitor. In the case of large banks with high energy In some applications of Aluminum Electrolytic Capacitor, parallel connection and series and combination of bank is discharged through the defective capacitor. In the case of large banks with high connections energy content may extremely abrupt severe phenomena. is bankthis is discharged through the defective capacitor. the case of large banksIt high energy content this may lead lead to to extremely abrupt and and severeIndischarge discharge phenomena. It with is therefore therefore parallel and seriesthis connections be used. abrupt and severe discharge phenomena. content may lead will to extremely It is therefore www.capxongroup.com.tw content this may lead to extremely abrupt and severe discharge phenomena. It is therefore www.capxongroup.com.tw 5.1 Parallel Connection www.capxongroup.com.tw www.capxongroup.com.tw Parallel connection: Current flows in equally through each unit are a necessary when parallel connection. 5.2 Series Connection Series connection: Using balancing resistors to equally control the voltage distribution across each unit. Operating voltage may exceed the specification value because of each single capacitors insulation is quite different and 029 Screw The total load be for following given values: TheInequivalent equivalent total ripple ripple current current load shall shall be calculated calculated for the theare following giventoRMS RMS values:currents of varying frequency. many applications, Electrolytic Capacitors subjected theRMS ripple Aluminum The equivalent total ripple current load shall be calculated for the following given values: Current 1: I at 400 Hz 20 A The equivalent total ripple current load shall be calculated for the following given RMS values: RMS Current 1: IRC, at 400 Hz 20 A RC, RMS a1, at 400Hz RMS=20A Current 1: I Current 1: IRC, RMS at 400 Hz 20 A Current 2: at kHz Current 1: RMS I RMS 40016 HzA Current 2: IIAC, at 4 4 at kHz 16 A20 A AC, a2, at 4 kHz RMS=16A Current 2: RMS IRC, Current 2: IAC, RMS at 4 kHz 16 A Ambient temperature Current 2: IAC, RMS 50℃ at 4 kHz 16 A Ambient temperature Ambient: 60°C 50℃ Ambient temperature 50℃ Required useful life Ambient temperature 50℃h Required useful life 100000 100000 h Requested Useful Life 100000 Hours Required useful life 100000 h The first step is to calculate the equivalent 120Hz values for two current values (frequency Required useful life 100000 h TheThe firstfirst step step is to calculate the equivalent 120Hz values for the the values (frequency is calculating equivalent 120Hz values fortwo thecurrent 2 current values (Frequency factors given on series RHThe first step is to calculate the equivalent 120Hz values for the two current values (frequency factors given on series RH "Frequency factor of permissible ripple current I ") and the The first step is to calculate the equivalent 120Hz values for the two current values (frequency RC factors given onfactor seriesofRH "Frequencyripple factorcurrent of permissible ripple IRC") and the Frequency permissible IRC) and thecurrent RMS value) factors given on series RH "Frequency factor of permissible ripple current IRC") and the root-mean-square value of the two equivalent values: factors given on series RH "Frequency factor of permissible ripple current IRC") and the root-mean-square value of the two equivalent values: root-mean-square value of the two equivalent values: Current II1:: 20 root-mean-square 20Α Α value Current CurrentI1: = 16 Αof the two equivalent values: 1 20=Α16 Α Current I1:1.25 Current I1 1:.2520 Α= 16 Α General technical information voltage distribution may quite irregularly. Therefore, forced balancing of voltage distribution is recommended. The balancing resistance must be equal to each other, and the resistance is requested much less than insulation resistance of capacitors. As Figure15: Figure 15 Formula of Equation Resistance Value: R balancing resistance = 50(mΩ) * μF * (1/CR) Screw 5.3 Combination of Parallel and Series Connection Above recommended combination gives apply both in Parallel and Series circuit. It is recommended to allocate balancing resistors to each capacitor if use balancing resistors is a must. (as Figure 16) Figure 16 6 Climatic Conditions 6.1 Minimum Permissible Operation Temperature (Lower Temperature) Aluminum Electrolytic Capacitors will increase DF values (or ESR values) when the operation temperature is decrease. Aluminum Electrolytic Capacitors will define the minimum operating temperature due to both of DF and ESR values are limited in a range for most product applications. 6.2 Maximum Permissible Operation Temperature (Upper Temperature) Maximum permissible operation temperature is meaning the capacitors maximum operation environment temperature. Capacitors will be un-useful if operation environment is higher than category defined. 030 General technical information Useful life and reliability will both increase if capacitors can be used in lower operation temperature environment. 6.3 Storage Temperature Aluminum Electrolytic Capacitors can be stored in voltage-free under category said temperature. However, it must reduce useful life and reliability easier and accelerate leakage current value if Capacitors stored in higher temperature. The oxide membrane getting worst is the mainly reason to cause abnormal circuit when Oxide membrane repaired by a larger current suddenly. Therefore, the storage temperature should not exceed 40 °C, and suggested stored at temperature 5 °C ~ 35 °C The effective valid date of capacitors is for 1 year, please use a series resistor in 1000Ω and rated voltage to charge for 30 minutes continuously to let inside oxide membrane regeneration if storage in a long time (over 12 months) is a necessary.. 7 Maintenance A regular inspection is recommended when screw capacitors use in industrial applications. Before inspection, make sure to turn off the power and discharge screw capacitors carefully, and do not force pressure to the terminal to avoid damage. Inspection items as below: 7.1 Outer damage, deformation and electrolyte leakage checking. 7.2 Electrical Performance: leakage current, capacitance, DF values and other product specifications subject times. If there is an abnormal detected, make sure the capacitor specifications to replacement and handled properly. 8 Mounting Make sure capacitor's rated capacitance, rated voltage and polarity before installation. Please confirmed capacitors and circuit board terminal pitch is consistent before installation. It may cause stress to internal capacitor through the terminal to cause short if the pitch is different. Robotic force pressure and lead bending strength has to be controlled properly when automatically mounting. Mounting Position of Screw Capacitors To avoid screw capacitor explosion when capacitance safety vent is opened while capacitance reached a certain exhaust gas pressure, the screw capacitors should not be mounted with the safety vent upside down. Recommended mounting method is shown as Figiure17 to avoid safety vent down installation. Figure 17 Recommended range of mounting positions 031 Screw 8.1 Installation General technical information Horizontal Mounting Request Anode terminal in upper side with safety vent in horizontal as Figure18. Safety vent in upper side with Anode and Cathode terminal in horizontal as Figure19. Figure 18 Figure 19 It may not damage capacitors directly but an electrolyte leakage may happen if install by other mounting methods. 8.2 Soldering 8.2.1 Before Soldering Soldering conditions (preheat, solder temperature and immersion time, frequency) must be completed in the limited range to prevent the performance of capacitors. When circuit board terminal pitch does not match with capacitors terminal pitch, please do not force extra pressure to capacitor when an extra treatment is necessary. Screw To avoid treating capacitor body with a soldering iron to prevent sleeve holes and other damage; To avoid capacitor body dipped in soldering, solder heat will cause the capacitor damage due to internal pressure arise. 8.2.2 After Soldering After soldering into PCB, do not external forces or pull capacitor body, to prevent the extra pressure to damage the part through the terminal into internal body to cause part short. 8.3 Cleaning Agents Please use available cleaning agents to clean circuit boards under temperature 50°C within 5 minutes after soldering Cleaning agent must be strictly managed, such as pollution, chlorine concentration may be increased, result to an internal capacitor corrosion. After cleaning, must be dry immediately, to avoid cleaning agent remains between sealing portion and circuit board. Do not use below solvents to clean the capacitance: Halogen-containing solvents: halogen solvents penetrate (diffuse) into the internal capacitance, will cause cleaning agent decomposition reaction of free chlorine ions, react with the aluminum to cause capacitor corrosion. Alkaline solvent: corrosion aluminum case Xylene: sealing rubber oxidation Acetone: description words blur or disappear 032 General technical information 9 Outer Sleeve of Capacitors Outer sleeve and outer plate does not guarantee electrical insulation function, description only. 10. Marking of Capacitors Marking Content of Screw Type:solvent. Brand Rated Capacitance Rated Voltage Capacitance Rated Temperature Capacitance Safety Vent Series Screw 033 Quality and environment Corporate goals We adhere to the tenet of "QUALITY FIRST", and offer satisfying products and service to the customer. This aim is shared by the CapXon quality and environment management system: 1 CapXon quality system 1.1 CapXon quality policy and entironment policy We adhere to the tenet of "QUALITY FIRST", and offer satisfying products and service to the customer. 1.2 Quality management system The quality management system to IATF 16949:2016 is applied throughout the company and is used to implement the CapXon quality policy. The implications include: As a rule, product and process developments follow the rules of APQP), Quality tools such as FMEA), MSA) and SPC) minimize risks and ensure continuous improvements in conjunction with regular internal audits and QM reviews. 1.3 Certification The CapXon quality management system forms the basis for the company certification to ISO 9001:2015 and IATF 16949:2016 that comprises the CapXon plants and sales organizations. 1.4 Delivery quality “Delivery quality” means compliance with the agreed data at the time of delivery. 1.5 Failure criteria A component is defective if one of its features does not correspond to the specification of the data sheet or an agreed delivery specification. Failure criteria please refer to Defective degree evaluation and handling method of reliability experiment. 1.6 Incoming goods inspection at the customer We recommend the use of a random sampling plan according to MIL-STD-1916 (contents compliant with MIL STD 105 CapXon Qualityinand D and IEC 60410) for incoming goods inspection. The test methods to be used are laid down theenvironment relevant standards. Deviations must be agreed by customer theofsupplier. Thethe service life inand terms reliability is the time period during which random failures occur, i.e. 1.7 Duration of use the range in the product operating life in which the failure rate remains largely constant (early The service life in termsfailures of reliability time period during which random failures occur, the range in the product and endisofthe operating life excepted). The value depends strongly on i.e. conditions of use. operating life in which the largely constant 1.7.1failure Failurerate rateremains (long-term failure rate) (early failures and end of operating life excepted). The value depends strongly on conditions of use. The failure rate is defined as the failure percentage divided by a specified operating period. The 1.7.1 Failure rate (long-term failure rate) 9 failure rate is expressed in fit (failures in 10 component hours) or as percentage of failures in1000 The failure rate is defined as the failure percentage divided by a specified operating period. The failure rate is hours.in 109 component hours) or as percentage of failures in1000 hours. expressed in fit (failures 1 fit = 1 x10-9/h (fit 1= fit failure in-9time) = 1 ×10 /h (fit = failure in time) Example of a failure rate test determined by a useful life test: Example of a failure rate test determined by a useful life test: 1. Number of components tested N = 10000 2. Operating hours tb = 20000 h 1.Number of components tested 2.Operating hours 3. Number of failures n=2 3.Number of failures λ test = N = 10000 tb = 20000 h n=2 n 1 2 1 ∗ = ∗ = 10FIT = 0.001%/1000H N t b 10000 20000H Failure rate specifications must include failure criteria, operating conditions and ambient conditions. Usually the failure rate of components, when plotted against time, shows a characteristic 034 curve with the following three periods: b 3.Number of failures λ test = n=2 n 1 2 1 ∗ = ∗ = 10FIT = 0.001%/1000H N t b 10000 20000H Quality and environment Failure rate specifications must include failure criteria, operating conditions and ambient conditions. Usually the failure rate of components, when plotted against time, shows a characteristic Failure rate specifications must include failure criteria, operating conditions and ambient conditions. Usually the curve with the following three periods: failure rate of components, when plotted against time, shows a characteristic curve with the following three periods: early failure period, II: useful period, wear-out failureperiod period I: early I:failure period, II: useful period, III: III: wear-out failure Early failure period wear-out failure period useful period Unless specified, otherwise specified, therate failure rate to refers the useful period During thisperiod, period, an approximately Unless otherwise the failure refers the to useful period (II). (II). During this constantanfailure rate 0 can be assumed. approximately constant failure rate 0 can be assumed. 1.8 AQL values1.8 AQL values The AQL (AQL= level)quality figures are figures based on random plan to MIL-STD-1916. Theacceptable AQL (AQL=quality acceptable level) areabased on asampling random sampling plan to The sampling instructions of this standard are such that a delivered lot will be accepted with a www.capxongroup.com.tw probability of 90% if the percentage of non-conformancies does not exceed the stated AQL figure. As a rule, the percentage of non-conformancies in deliveries from CapXon is significantly below the AQL figure. The acceptance value we apply to inoperatives, i.e. unusable components is c= 0. 2 Environmental management system 2.1 Environmental policy CapXon defines the following environmental protection principles: Comply with the law, Govern the pollution, Produce Cleanly, Reduce the consume, Save resource, Cut down the toxic substance, Make Improvement Continuously, Beautify the environment 2.2 Environmental management system The CapXon ISO 14001 based environmental management system is applied company wide for implementing the CapXon environmental policy. It is posted on the CapXon Intranet and is thus accessible to all employees. 2.3 Environmental Hazardous Substances Free management system The CapXon QC080000 based HSF management system is applied company wide for implementing the CapXon environmental Hazardous Substances management. that Capxon products effectively in the management of hazardous substances. 2.4 Energy Management System CapXon establishes comprehensive energy use management in accordance with the requirements of ISO 50001 Energy Management System in order to meet the social responsibility of low carbon environmental protection and efficiency. 2.5 Certification 2.5.1 The CapXon Group operates an environmental management system that conforms to the require- ments of ISO 14001 and is mandatory for all plants. The CapXon Group operates an Energy management system that conforms to the requirements of ISO 50001 and is mandatory for all plants. The CapXon Group operates an environmental Hazardous Substances Free management system that conforms to the requirements of QC 080000 and is mandatory for all plants. The company certificate is posted on the CapXon internet: (www.capxongroup.com ). 2.5.2 SONY GP certification: On Nov 2011, CAPXON have already got the SONY GP certification.GP NO.:FC012746 2.5.3 C-ROHS certification: On Dec 2012, CAPXON have already got the C-ROHS certification. products type: SMD type, Snap-in type and Radial type. 035 Quality and environment 2.6 RoHS The term “RoHS-compatible” shall mean the following: The components described as“RoHS-compatible” are compatible with the requirements of the regulations listed below(“Regulations”) and with the requirements of the provisions which will result from transformation of the Regulations into national law to the extent such provisions reflect the Regulations: Directive 2002/95/EC of the European Parliament and of the Council of January 27, 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive 2002/95/EC");The directive from July 1, 2006 entered into force. Commission Decision of 1August 18, 2005 amending Directive 2002/95/EC (2005/618/EC); Commission Decision of October 13, 2005 and of October 21, 2005 amending the Annex to Directive 2002/95/EC (2005/717/EC, 2005/747/EC, 2006/310/EC, 2006/690 .692/EC). December 3, 2008 The European Commission published its official Web site of the RoHS directive revised draft COM (2008) 809 / 4. September 3, 2009 RoHS EU issued a revised second draft Directive COM (2008) 809final. October 22, 2009 EU Environment Public Health and Food Safety Committee (Committee on the environment, public health and food safely) released on COM (2008) 809 of the amendments. July 1, 2011,the European Parliament and Council issued directive 2011/65/EU(ROHS.2.0) in the official Journal of the European Union to replace the 2002/95/EC. The new directive has been fully implemented on January 1,2013, the old directive 2002/95/EC has been abolished. RoHS Directive, also known as Amendment RoHS 2.0, the amendment involves a lot of content. But the basic objectives and mechanisms have not been changes, the ultimate goal still is to reduce the electrical and electronic products of certain hazardous substances. The instruction modified to increase 4 to be "priority review" the use of substances HBCDD, DEHP, DBP and BBP. 2.7 Halogen Free(HF) Base on customer and environmental regulations on the management and control requirements of halogen , such as the European 2002-95-EC, IEC 61249-2-1, ”Montreal Protocol on Substances that Deplete the Ozone Layer”, “Controls the Stockholm joint pledge about durable organic pollutant”, CapXon has imported halogen-free materials of all electrolytic capacitors completely at the beginning of 1st,June,2009. All products shipped meet the halogen-free requirements on 31th,Oct,2009. 2.8 Banned and Environmental Hazardous Substances in components As a manufacturer of passive components, we develop our products on the basis of sustainability. In order to guarantee a standardized procedure for CapXon Group, a mandatory list of Environmental Hazardous Substances of special interest is part of our environmental management system. The planning and development instructions include regulations and guidelines that aim to identify environmental aspects and to optimize products and processes with respect to material use and environmental compliance, to design them with sparing use of resources and to substitute hazardous substances as far as possible. In consideration of the environmental aspects are checked and recorded in the design reviews: the environmental officer provides support in the assessment of the environmental impacts of a development project. 2.9 Product Series and Specifications for product catalog CapXon Product Series and Specifications on the Internet (www.capxongroup.com) ,It is available to refer to check for customers. 2.10 Disposal All aluminum electrolytic capacitors can be disposed off, reused or recycled. However as disposal is regulated by national law, the respective national provisions have to be observed. 036 Precautions & Guidelines The superimposition of a large ripple current increases the For Conductive Polymer Capacitors rate of heating within the capacitor. This may reduce the CP-CAP is a solid aluminum capacitor with conductive polymer electrolyte. Please read the following points in order service life of the capacitor or damage the capacitor. 5. Operating temperature to take the most out of your CP-CAP. Do not use the CP-CAP at high temperatures (temperatures Designing device circuits exceeding the maximum temperature for the capacitor 1. Circuits where CP-CAPs are prohibited to used category) Use of the capacitor outside of the maximum The leakage current of conductive polymer solid temperature for the capacitor category may decrease the aluminum capacitors may vary depending on thermal service life of the capacitor. stresses. Please don’t use solid capacitors in the following 6. Sudden charge and discharge types of circuits: Do not use the CP-CAP in circuits where the capacitor is (1) High-impedance circuits that are to sustain voltages. repetitively charged and discharged rapidly. Repetitively (2) Coupling circuits charging and discharging the capacitor rapidly may reduce (3) Time constant circuits the capacitance or may cause damage due to internal In addition to the leakage current fluctuation, heating. Use of a protective circuit to ensure reliability is capacitance may also fluctuate depending on recommended when rush currents exceed 10A or the rush operational temperature and humidity. The fluctuation current is over 10 times of allowable ripple current of CP- of the capacitance may cause problem if it is used as a CAP . time constant capacitor, which is extremely sensitive A protection resistor (1 kΩ) must be inserted to the circuit to the fluctuation of the capacitance. Do not use it as a during the charge and discharge when measuring the time constant capacitance. leakage current. (4) Other circuits that are significantly affected by leakage 7. Failures and life-span current. If you want to use 2 or more CP-CAPs in a The CP-CAP failure rate in use is based on the failure rate series connection, please contact us before use. level in the specification requirements. Upper category 2. Polarity temperature and category voltage adhere to JIS C 5003 The CP-CAP is a polarized solid aluminum electrolytic Standard. The confidence level is 60% and the failure rate capacitor. Do not apply either reverse voltages or AC is 0.5%/1,000 hours (applied rated voltage at category voltages to the polarized capacitors, using reverse polarity temperature). may cause a short circuit. Refer to the catalog, product The failure modes mainly have 2 types as follows. specifications or capacitor body to confirm the polarity (1) Contingency failure prior to use. The contingency failure mainly has short circuit. The phenomenon of after short is on following. 3. Applied voltage Do not apply DC voltages exceeding the full rated voltage. (i) In the event a short circuit causes the current to The peak voltage of superimposed AC voltages (ripple voltages) on DC voltages must not exceed the full rated become relatively small(less than approximately 1A for φ10,less than approximately 0.5A for φ8 voltage. While there are specifications for surge voltages and less than approximately 0.2A for smaller than exceeding the rated voltage, usage conditions apply, and φ6.3 ),the CP-CAP itself will generate a little heat, continued operation for extended periods of time under but its appearance will not be affected even when such conditions cannot be guaranteed. Use the within 20% electricity is supplied continuously. However, of the rated voltage for applications which may cause the if the short circuit current value exceeds the reverse voltage during the transient phenomena when the mentioned values above, the temperature inside power is turned off or the source is switched. the CP-CAP will increase, the internal pressure is 4. Ripple current raised, rubber sealing is turned over, and odorous Do not apply currents in excess of the rated ripple current. gas is released. In this case, keep your face and 037 Precautions & Guidelines hands away from the area. damp locations. (ii) The electrolyte, electrolytic paper, sealing rubber, (2) Direct sunlight and plastic spacer used in the CP-CAP are all (3) Toxic gases such as hydrogen, sulfide, sulfurous combustible. If an extremely large electric current acids,nitrous acids, chlorine and chlorine compounds, flows through the capacitor after shorting, the bromine and bromine compounds, ammonia, etc. shorted part may spark, and in a worst case (4) Ozone, ultraviolet rays and radiation. scenario, may ignite. Ensure safety by fully (5) Severe vibration or mechanical shock conditions considering the design issues described below beyond the limits advised in the product specification when using this capacitor in equipment where section of the catalog. safety is a priority. 10. Capacitor mounting • Increase safety by using in conjunction with a (1) For the surface mount capacitor, design the copper protective circuit or protective equipment. pads on the PC board in accordance with the catalog • Install measures such as redundant circuits so or the product specification that the failure of a part of the equipment will (2) For radial capacitors, design the terminal holes on the PC board to fit the terminal pitch of the capacitor. not cause unstable operation. (2) Performance characteristic and failure (life-span) 11.Leakage current CP-CAP characteristics can possibly change Heat pressure from soldering and mechanical stress from (capacitance reduction and ESR increase) within the transportation may cause the leakage current to become specified range in specifications when it is used in the large. In such a case, leakage current will gradually condition of rated voltage, electric and mechanical decrease by applying voltage less than or equal to the performance. rated voltage at a temperature within the upper category When life span exceeded the specified guarantee time temperature. In close conditions to the upper category of endurance and damp heat, electric characteristic temperature, the nearer the applied voltage is to the rated might change and cause electrolyte insulation. This is voltage, the faster the leakage current recovery speed is. called open circuit mode. It is recommended to use the Mounting precautions capacitor at a lower temperature than the maximum 1. Note (1) For the surface mount capacitor, design the copper temperature for the capacitor category. pads on the PC board in accordance with the catalog 8. Circuit design Verify the following before designing the circuit: or the product specification (1) The electrical characteristics of the capacitor will (2) For radial capacitors, design the terminal holes on the vary depending on differences in temperature and PC board to fit the terminal pitch of the capacitor. frequency. Only design your after verifying the scope (3) Mount after checking the capacitance and the rated of these factors. voltage. (2) When connecting two or more capacitors in parallel, (4) Mount after checking the polarity. (5) Do not apply excessive external force to the lead ensure that the design takes current balancing into account. terminal and the CP-CAP itself. (3) When two or more capacitors are connected in series, (6) Ensure that the soldering conditions meet the variability in applied voltage may cause over-voltage specifications recommended by CapXon. Note that the conditions. Contact CapXon before using capacitors leakage current may increase due to thermal stresses connected in series. that occur during soldering, etc. Note that increased leakage currents gradually decrease when voltage is 9. Capacitor usage environment Do not use/expose capacitors to the following conditions. applied. (1) Oil, water, salty water, take care to avoid storage in 2. Soldering using a soldering iron: 038 Precautions & Guidelines (1) The soldering conditions (temperature and time) are 4. Reflow soldering within the ranges specified in the catalog or product (1) Soldering conditions (preheat, solder temperature and soldering time) should be within the limits prescribed specifications. in the catalogs or the product specification. (2) The tip of the soldering iron does not come into (2) The heat level should be appropriate. (Note that the contact with the capacitor itself. 3. Flow soldering thermal stress on the capacitor varies depending on the type and position of the heater in the reflow oven.) (1) Do not dip the body of a capacitor into the solder bath only dip the terminals in. The soldering must be done (3) Vapor phase soldering (VPS) is not used. on the reverse side of PC board. (4) Except for the surface mount type, reflow soldering (2) Soldering conditions (preheat, solder temperature and dipping time) should be within the limits prescribed in must not be used for the capacitors. (5) In the case of reflow soldering, capacitive static the catalog or the product specifications. electricity may decrease after soldering even when the In regards to flow soldering, be sure to solder within soldering conditions are within the required values. (6) Recommended reflow condition of SMD type. the following conditions. Temperature Preheating Soldering conditions (3) Do not Duration Flow number 120℃ or less 1 time (ambient 120 sec. or less temperature) 260+5℃ or 10+1 sec. or less Twice or less less apply flux to any part of capacitors other than °C °C °C their terminals. (4) Make sure the capacitors do not come into contact with any other components while soldering. Voltage range Preheat Time maintained above Time maintained above 200℃ 230℃ 90 sec. max. 2.5 to 10v 60 sec. max. Peak temp. Reflow number 260℃max only 1 time 250℃max twice or less 90 sec. max. 60 sec. max. 250℃max only 1 time 16 to 25v 80 sec. max. 50 sec. max. 240℃max twice or less 35 to 100v 70 sec. max. 30 sec. max. 240℃max only 1 time Note : 1) All temperatures are measured on the topside of the Al-case and terminal surface. 2) The second reflow soldering shall be applied after the temperature of capacitors decreases down to the room temperature. 150 to 180℃ 120 sec. max. 039 Precautions & Guidelines The leakage current value may increase(from a few μA to with an air knife (temperature should be less a few mA) even within the above conditions. When the than the maximum rated category temperature CP-CAP is used in a DC circuit, the leakage current will of the capacitor) for 10 minutes. Aluminum decrease gradually through self-recovery after voltage is electrolytic capacitors can be characteristically applied. If your reflow profile deviates from the above and catastrophically damaged by halogen ions, conditions for mounting the CP-CAP, please consult with particularly by chlorine ions, though the degree of CapXon. the damage mainly depends upon the characteristics of the electrolyte and rubber seal material. When 5. Handling after soldering Do not apply any mechanical stress to the capacitor after halogen ions come into contact with the capacitors, soldering onto the PC board. the foil corrodes when a voltage is applied. This (1) Do not lean or twist the body of the capacitor after corrosion causes an extremely high leakage current which results venting and an open circuit. soldering the capacitors onto the PC board (2) Do not use the capacitors for lifting or carrying the Storage The following conditions for storage are recommend. assembly board. (3) Do not hit or poke the capacitor after soldering to PC (1) Store capacitors in a cool, dry place. Store at a board. When stacking the assembly board, be careful temperature between 5 and 35℃, with a humidity of that other components do not touch the aluminum 75% or less. SMD products are sealed in a special electrolytic capacitors. laminated aluminum bag. Use all capacitors once (4) Do not drop the assembled board. the bag is opened. Return unused capacitors to the 6. Washing the PC boards (1) Do not wash capacitors by using the following bag, and seal it with a zipper. Be sure to follow our cleaning agents. Solvent resistant capacitors are only (2) Store the capacitors in a location free from direct suitable for washing using the cleaning conditions recommendations for reflow soldering. contact with water, salt water, and oil. prescribed in the catalog or the product specification. (3) Store in a location where the capacitor is not exposed In particular, ultrasonic cleaning will accelerate to toxic gas, such as hydrogen sulfide, sulfurous acid, damage to capacitors. nitrous acid, chlorine or chlorine compounds, bromine • Halogenated solvents; cause capacitors to fail due or other halogen gases, methyl bromide or other halogen compounds, ammonia, or similar. to corrosion. Alkali system solvents; corrode (dissolve) an (4) Store in a location where the capacitor is not exposed to ozone, ultraviolet radiation, or other radiation. aluminum case. • Petroleum system solvents; cause the rubber seal (5) It is recommended to store capacitors in their original packaging wherever possible. material to deteriorate. • Xylene; causes the rubber seal material to deteriorate. • Acetone; erases the markings. (2) Verify the following points when washing capacitors. • Monitor conductivity, ph, specific gravity and the water content of cleaning agents. Contamination adversely affects these characteristics. • Be sure not to expose the capacitors under solvent rich conditions or keep capacitors inside a closed container. In addition, please dry the solvent sufficiently on the PC board and the capacitor 040 Precautions & Guidelines For Aluminum Electrolytic Capacitors When you use aluminum electrolytic capacitors, remember the following. 1.Polarity 。Regular electrolytic Capacitor has polarity. 。Reverse voltage causes short circuit breakage of the capacitor or leakage of electrolyte. Where the polarity in a circuit sometimes reversed or unknown, a bi-polar capacitor should be used. 使用鋁電解電容器注意事項： 2.Overvoltage 。Do not apply overvoltage continuously. 。When overvoltage is applied to the capacitor, leakage current increase drastically. 。Applied working voltage to capacitors should not exceed the rated working voltage of capacitor. 2.過載 3.Operating temperature and life: 。Do not use the capacitor over the max operating temperature. 。Life time of the capacitor depends on the temperature. 。Generally, life time is doubled by decreasing each temperature 10℃. 。Use temperature as low as possible. 3.使用溫度和壽命 4.Vent 。It is recommended at least 3mm of space around the vent. 。If such space is not provided, the vent will not operate completely. 4.防爆孔 5.Ripple current 。Do not apply a ripple current exceeding the rated maximum ripple current. 。Applying too much ripple current to the capacitor causes great heat generation, invites deterioration of properties of cases breakage. 。Please consult factory if ripple current exceeds the specified limit. 5.紋波電流 6.Charge and discharging 。Frequent and quick charge/discharge generates heat inside the capacitor, causing increase of leakage current, decrease of capacitance, or breakage occasionally. 。Consult us for assistance in this application. 6.充放電 1.極性 鋁電解電容器一般是有極性的，極性反接是造成鋁 電解電容器短路損壞及漏液的原因，因此在無法辨 識電氣迴路上之極性或使用於有極性變換設計之迴 路時，請選用無極性電解電容器。 請勿連續施加過載電壓。當電壓過載時電解電容器 的漏電流會急速增加，所以電解電容器之工作電壓 不應超過額定值。 電解電容器之使用溫度請勿超出最高使用溫度之設 定範圍。電解電容器的壽命取決於使用溫度，一般 來說當電解電容器之使用溫度降低10℃時，其壽命 將增為兩倍，因此電解電容器應儘可能在較低溫度 下使用。 有防爆孔設計之電解電容器其使用時防爆孔側應與 其它機構保持最少3mm以上之空間距離，如此條件 不能滿足的話，防爆孔將無法正常運作。 請勿施加超過額定最高紋波電流容許值以上之紋波 電流。施加過大紋波電流將使電解電容器的內溫異 常上升，引起電解電容器電氣特性劣化及破損。如 有需要施加額定值以上之紋波電流等要求時，請諮 詢敝廠人員。 經常及快速的充放電將使電容器之內溫異常上升， 使漏電流增加、容量降低，有時還會造成產品之損 壞，如對充放電有特殊要求時請諮詢敝廠人員。 041 Precautions & Guidelines Quality and environment 7.Storage 7.Storage the capacitor is stored for a long time without 。When 。When thevoltage, capacitor is stored fortends a long time without applying leakage current to increase. applying voltage, leakage current tends to increase. to 。This returns to normal by applying the rated voltage the capacitor before use. 。This returns to normal by applying the rated voltage recommended to apply 。Ittoisthe capacitor before use. D.C. working voltage to theiscapacitor for 30 minutes through of protective 。It recommended to apply D.C. 1KΩ working voltage to series resistor, if it is stored for more than 12 months. the capacitor for 30 minutes through 1KΩ of to capacitor should be stored at temperature 5℃than 。The protective series resistor, if it is stored for more , with humidity of 75% or less. 35 12℃ months. 。The capacitor should be stored at temperature 5℃ 8.For SMD Soldering to 35℃, with humidity of 75% or less. 。Improper soldering may shrink or break the insulating 8.For SMD Soldering sleeve and/or damage the internal element as terminals 。and lead wires conduct heat into the capacitor. Improper soldering may shrink or break the insulating sleeve and/or damageand/or the too internal 。Avoid too high a soldering temperature long element as terminals and lead wires conduct heat a soldering time. into the capacitor. 。Solderability 245±5℃,2±0.5 secs,95% coverage 。Avoid min. too high a soldering temperature and/or too long a soldering time. 9. Reflow soldering of SMD 。Solderability 245±5℃,2±0.5 secs,95% coverage min 9. Soldering Heat Resistance as below Temperature Reflow soldering of SMD ( 增加) profile Soldering Heat Resistance as below Temperature profile 7.電解電容器的儲存 7. 電解電容器的儲存 當電解電容器經過長時間之放置後，通常其漏電流 當電解電容器經過長時間之放置後，通常其漏電 有增大之傾向。因此在使用經過長時間放置後之電 流 有增大之傾向。因此在使用經過長時間放 解電容器以前，建議需先施加定額電壓使其電氣特 置後之 電解電容器以前，需先施加定額電壓使 性 回復正常；如儲存時間長於12個月以上時，請 其電氣特 性 回復正常；如儲存時間長於12個月 串排1kΩ之保護電阻後，使其持續負載定額工作 以上時，請串 排1kΩ之保護電阻後，使其持續 電壓30分鐘。另外電解電容器應儲存於溫度介於 負載定額工作電壓30分鐘。另外電解電容器應 5℃∼35℃及濕度75%或以下之環境。 儲存於溫度介於5℃~35℃及濕度75%或以下之 環境。 8.SMD焊 不適當的焊錫溫度及時間可能造成表面膠管之異常 8. SMD焊錫 收縮破裂，有時高溫也會藉由導針及端子導熱至素 不適當的焊錫溫度及時間可能造成表面膠管之異 子內部，對產品造成不良影響，因此須儘量避免過 常 收縮破裂，有時高溫也會藉由導針及端子導 高溫度及過長時間之焊錫。 熱至素 子內部，對產品造成不良影響，因此須 焊接性：245±5℃, 2±0.5 秒, 表面大於95%範圍附 儘量避免過 高溫度及過長時間之焊錫。 著錫。 可焊性：245±5℃, 2±0.5 秒, 最小95% 範圍上錫 9.SMD回流焊 耐焊接熱如下溫度曲線 9. SMD回流焊 耐焊接熱如下溫度曲線 Peak Temp. t3 Temperature (℃) T4 T3 t2 T2 T1 t1 Preheat Times (s) Size Size Φ3∼ Φ3～ Φ6.3 Φ6.3 Voltage Voltage Time maintained above 230℃ Preheat Preheat Temp.(T1~T2) Temp.(T1~T2) Time(t1) Time(t1) 50V 44toto50V Φ8∼ Φ10 63 to 450V Φ8～ Φ12.5~ 4 to 50V Φ18 Φ10 63 to63 450V to Temp.(T3) above 230℃ 150℃ to 180℃ 4 to 50V 450V Temp.(T3) Time (t2) Time (t2) Peak temp. Peak temp. Temp.(T4) Temp.(T4) Reflow number Time Reflow (t3) number Time (t3) 2 times or less above 230℃ 30 sec. 30 max sec. max above 230℃ 260℃260℃ max. max. 10 sec.10 sec. 2 times or less 63 to 100V 63 to 4 to100V 50V Time maintained above 230℃ 150℃ to 180℃ 120sec. max. 30 sec. max 255℃ max. 5 sec. 2 times or less 2 times or above 230℃ 30 sec. 30 max sec. max above 230℃ 250℃255℃ max. max.5 sec. 5 sec. 2 times or lessless above 230℃ 30 sec. max 240℃ max. 5 sec. 2 times or 2 less times or above 230℃ 250℃ max. 30 sec. max 5 sec. 20 sec. max. 245℃ max 5 sec. 2 times or lessless 120sec. above 230℃ max. above 230℃ -. 235℃ max 5 sec. 2 times or 2 less times or above 230℃ 30 sec. max 240℃ max. 5 sec. 20 sec. max. 245℃ max 5 sec. 2 times or less -. 235℃ max 5 sec. 2 times or less Φ12.5~ 4 to 50V above 230℃ Φ18 63 to 450V above 230℃ 042 less Precautions & Guidelines 10.Mechanical stress on the lead wire and the terminal 。Do not apply excessive force to the lead wire and the terminal. 。Do not move the capacitor after soldering to the PC board, not carry the PC hoard by picking up the capacitor. 10.導針與端子之機械強度 11.Cleaning of boards after soldering 。If the capacitor is cleaned in halogenated solvent for organic removing solder flux solvent, the solvent may penetrate into the inside of capacitor, and may generate corrosion. 11.焊錫後之基板清洗 12.Sleeve material 。The standard sleeve matenal is polyethylene terephthalate. 。If exposed to xylene, toluene, etc, and then subjected to high heat, the sleeve may crack. This sleeve is not insulating material. 12.套管材料 13.CapXon's Products meet quality standards specified by JIS-C-5101-1 and the reliability requirements refer to JIS-C-5101-4(non-SMD liquid capacitor), -18(Liquid SMD capacitor), -25(solid SMD capacitor),-26(solid Radial capacitor). 13.本公司之產品品質符合JIS-C-5101-1指定標準， 14.None of ozone depleting chemicals (ODC) under the Montreal Protocol is used in manufacturing process of CapXon Electronic Industrial CO., Ltd. 14.本公司依蒙特利爾協議書之規定，於生產過程中 15. About AEC-Q200 The Automotive Electronics Council(AEC) , was setup by American major automotive manufactures, which now are an industry committees consist of various manufacturers of electrical equipment and spare components .It’s also responsible for the standardization of reliability test and standard test of electronic components. AEC-Q200 is the reliability test standard for the determination of passive components, which specifies the test items and the number of test items for various components, including the reliability test standard for aluminum electrolytic capacitors. For the increasing number of aluminum electrolytic capacitors for on-board use in recent years, our company can provide the experimental results according to the requirements of the guests, corresponding to AEC-Q200. 15. AEC是車載電子零部件評議會的簡稱，是由美國 請勿施加過度之外力於導針及端子上。請勿扳開已 焊接於PC板上之電解電容器，更不要以電解電容器 為施力點提起或移動整塊pc板。 如使用鹵化有機溶劑清洗基板，溶劑有可能滲進 電解電容器內部引起腐蝕。 一般使用之塑膠套膠材質多為聚對苯二甲酸乙二 酯（PET），如塑膠膠管在浸漬二甲苯或甲苯後再 放置於高溫下，將產生分解反應，膠管將失去絕 緣功能。 其信賴性試驗方法依JIS-C-5101-4(非SMD液態 電容)，-18（液態SMD電容），-25(固態SMD電 容)，-26（固態導針型電容）之規範為基準。 不使用破壞臭氧層之藥品。 043 主要汽車製造商設立，現在由電裝，零部件各製 造公司構成的行業團體。負責電子零部件的可靠 性試驗及認定標準試驗的標準化工作。 AEC-Q200是被動元器件的認定用可靠性試驗標 準，規定了各類元器件的試驗專案及試驗數量等, 其中也規定了鋁電解電容器的可靠性試驗標準。 對於近年來逐漸增多的用於車載用途的鋁電解 電 容器，我公司可對應AEC-Q200，根據客人的要求 提供實驗結果。詳情另外諮詢。 PL series Conductive Polymer PL series Low ESR ≤ 9mΩ Features ◆ Very Low ESR at high frequency range. ◆ Very Large permissible ripple current. Specifications Items Performance Characteristics Operating Temperature Range -55℃∼+105℃ Rated Voltage Range 2.5∼16V DC Capacitance Range 180 to 3500μF Capacitance Tolerance ±20%（120Hz，+20℃） Leakage Current（+20℃，max） Not to exceed the values shown in Standard Ratings （Rated voltage applied, after 2 minutes at 20℃） Dissipation Factor (tanδ，at 20℃，120Hz) Not to exceed the values shown in Standard Ratings ESR（at 100KHz，20℃） Not to exceed the values shown in Standard Ratings Capacitance Change Endurance 105℃，2000h，at rated voltage Leakage current Not to exceed the value specified ESR Not to exceed 150% of the value specified Dissipation Factor Not to exceed 150% of the value specified Capacitance Change Moisture Resistance Stored at 60℃，RH90∼95%， 1000h Within ±20% of the value before test Leakage Current Within ±20% of the value before test Not to exceed the value specified ESR Not to exceed 150% of the value specified Dissipation Factor Not to exceed 150% of the value specified Frequency Coefficient for Ripple Current Frequency 120Hz≦freq.10000 h △C/C tanδ Ileak ≤±15% of initial value ≤1.75 times initial specified limit ≤ initial specified limit Post test requirements: Voltage Endurance test 85℃; VR 2000 h △C/C tanδ Ileak ≤±10% of initial value ≤1.3 times initial specified limit ≤ initial specified limit To IEC 60068-2-6, test Fc: Vibration Resistance test Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz, acceleration max. 10 g, duration 3x2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 120 Hz VR(V) Z-25℃ / Z 20℃ Z-40℃ / Z 20℃ Characteristics at low temperature Sectional specification 160-450 4 10 ≧500 4 - IEC 60384-4 and JIS-C-5101 Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier 50 0.8 120 1 300 1.2 1K 1.3 ≧3K 1.4 359 Screw Dissipation Factor (tanδ,at 20℃,120Hz) RP Series Dimensional drawings Ring clip/clamp mounting: CapXon 4700 µ F 450 V RP VENT 85 ℃ M5:Min.reach of screw = 8mm M6:Min.reach of screw = 12mm M8:Min.reach of screw = 16mm Dimensions Terminal M5 M5 M5 M5 M6 M8 d±2 35 51 63.5 76.2/89 76.2/89 100 Dimensions(mm) with insulating sleeve L±3 L1±3 d2max. 50~120 56.5~126.5 10.3 80~140 86.5~146.5 10.3 80~140 86.5~146.5 10.3 100~240 106.4~246.5 10.3 100~240 106.4~246.5 17.5 100~240 110~250 17.5 Packing a±0.5 12.7 22 28.6 31.8 31.8 41.5 Packing of screw length l(mm) ≤70mm >70mm ≤70mm >70mm ≤70mm >70mm all all all all Capacitor diameter d(mm) 35 42 51 63.5 76.2 89 100 Packing units (pcs.) 120 60 120 60 70 35 24 15 12 6 Accessories The following items are included in the delivery package, but are not fastened to the capacitors. For terminals For mounting Thread M5 M6 M8 M12 Maximum torque 2 Nm 2.5 Nm 5.0 Nm 10 Nm 360 RP Series Case Size WV (Vdc) Cap (uF) Size (mm) 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 1000 1500 2200 2200 3300 3300 3900 3900 4700 4700 5600 6800 6800 6800 8200 8200 10000 10000 10000 12000 15000 15000 15000 18000 22000 22000 27000 33000 33000 33000 39000 47000 68000 1000 1500 2200 2700 3300 3300 3900 4700 4700 5600 6800 6800 8200 8200 10000 10000 12000 15000 15000 18000 22000 22000 27000 33000 47000 680 1000 1500 35x60 35x60 35x80 35x100 35x100 35x120 51x75 51x80 51x75 51x80 51x96 51x96 51x100 51x120 51x115 51x120 51x140 63.5x96 63.5x100 63.5x96 63.5x120 63.5x130 76.2x100 63.5x130 76.2x120 76.2x130 76.2x130 76.2x160 89x130 89x140 89x157 89x170 89x230 35x60 35x80 35x100 35x120 35x120 51x75 51x75 51x96 51x100 51x115 51x120 51x130 63.5x96 63.5x100 63.5x96 63.5x120 76.2x96 76.2x96 76.2x120 76.2x130 76.2x155 89x120 89x130 89x157 89x220 35x60 35x80 35x80 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 2.8 110 200 3.1 74 130 4.2 52 90 4.7 52 90 5.3 34 60 5.8 34 60 5.5 29 51 5.7 29 51 5.9 24 42 6.1 24 42 7.2 20 36 8.0 17 29 8.1 17 29 8.8 17 29 9.3 14 24 9.5 14 24 10.9 11 20 10.5 11 20 10.7 11 20 11.5 10 17 14.0 8 13 14.5 8 13 14.6 8 13 15.7 6 11 17.6 5 9 18.3 5 9 20.3 4 7 22.0 3 6 23.8 3 6 24.6 3 6 28.0 3 6 28.2 3 6 28.5 3 5 3.0 110 200 3.5 74 130 4.8 52 90 5.5 42 74 5.9 34 60 6.0 34 60 6.2 29 51 6.4 24 42 6.5 24 42 7.6 20 36 8.7 17 29 9.0 17 29 9.5 14 24 9.7 14 24 10.4 11 20 11.5 11 20 12.1 10 17 14.6 8 13 16.0 8 13 16.6 6 11 19.8 5 9 19.3 5 9 21.5 4 7 25.6 3 6 28.3 3 5 2.5 170 290 3.1 110 200 3.8 74 130 361 WV (Vdc) Cap (uF) Size (mm) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 1800 2200 2200 2700 3300 3300 3900 4700 4700 4700 5600 6800 6800 6800 8200 10000 10000 10000 12000 15000 15000 15000 18000 22000 33000 47000 390 470 470 560 680 820 1000 1000 1200 1200 1500 1500 1500 1800 1800 1800 1800 2200 2200 2200 2200 2700 2700 2700 2700 2700 2700 3300 3300 3300 3300 3300 3300 3300 3900 35x100 35x120 51x75 51x75 51x96 51x100 51x115 51x120 51x140 63.5x96 63.5x96 51x140 63.5x115 76.2x100 63.5x115 63.5x130 76.2x120 76.2x140 76.2x115 76.2x130 76.2x150 89x120 76.2x155 89x157 89x220 100x240 35x50 35x60 35x65 35x70 35x80 35x90 35x100 51x65 35x120 51x75 51x60 51x65 51x75 51x70 51x75 51x80 51x85 51x80 51x96 51x105 51x120 51x90 51x105 51x115 63.5x65 63.5x80 63.5x96 51x105 51x120 51x130 63.5x75 63.5x85 63.5x96 63.5x115 51x130 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 3.9 63 110 4.9 52 90 4.8 52 90 4.9 42 74 6.1 34 60 6.2 34 60 6.5 29 51 8.4 24 42 9.1 24 42 8.7 24 42 9.3 20 36 9.9 17 29 10.2 17 29 10.6 17 29 10.9 14 24 11.7 11 20 12.5 11 20 13.3 11 20 12.8 10 17 15.2 8 13 16.2 8 13 16.0 8 13 17.8 6 11 21.0 5 9 25.7 3 6 28.4 3 5 1.9 290 510 2.1 240 420 2.2 240 420 2.3 210 360 2.8 170 290 3.0 140 240 3.6 110 200 3.7 110 200 3.9 97 170 3.9 97 170 4.4 74 130 4.5 74 130 4.8 74 130 5.8 63 110 6.0 63 110 6.1 63 110 6.3 63 110 6.7 52 90 7.3 52 90 7.6 52 90 8.0 52 90 7.8 42 74 8.4 42 74 8.7 42 74 7.7 42 74 8.4 42 74 9.1 42 74 8.5 34 60 9.1 34 60 9.4 34 60 8.4 34 60 8.8 34 60 9.3 34 60 10.0 34 60 11.3 29 51 RP Series WV (Vdc) Cap (uF) Size (mm) 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 3900 3900 3900 3900 3900 4700 4700 4700 4700 4700 4700 4700 5600 5600 5600 5600 5600 5600 5600 6800 6800 6800 6800 6800 6800 6800 8200 8200 8200 8200 8200 10000 10000 10000 10000 10000 10000 10000 10000 10000 12000 12000 12000 12000 12000 12000 12000 15000 15000 15000 15000 15000 18000 18000 18000 22000 22000 39000 330 390 390 470 560 63.5x80 63.5x96 63.5x105 63.5x115 76.2x100 51x140 63.5x90 63.5x115 63.5x130 76.2x70 76.2x96 76.2x100 63.5x100 63.5x130 76.2x85 76.2x96 76.2x115 76.2x125 89x105 63.5x125 63.5x143 76.2x95 76.2x115 76.2x130 76.2x140 89x100 63.5x145 76.2x105 76.2x130 76.2x143 76.2x155 63.5x165 76.2x125 76.2x155 76.2x170 76.2x190 89x95 89x120 89x130 89x157 76.2x150 76.2x180 76.2x220 89x110 89x130 89x145 89x155 76.2x190 89x140 89x155 89x190 89x219 76.2x210 89x155 89x220 89x190 89x230 100x240 35x50 35x60 35x65 35x70 35x80 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 10.3 29 51 11.1 29 51 11.6 29 51 12.0 29 51 12.6 29 51 12.9 24 42 12.0 24 42 13.3 24 42 14.0 24 42 12.0 24 42 13.7 24 42 13.8 24 42 13.5 20 36 15.2 20 36 14.1 20 36 14.8 20 36 16.0 20 36 16.5 20 36 16.8 20 36 15.9 17 29 16.9 17 29 15.7 17 29 17.0 17 29 17.9 17 29 18.5 17 29 17.5 17 29 18.6 14 24 17.9 14 24 19.6 14 24 20.4 14 24 21.2 14 24 21.8 11 20 21.3 11 20 23.4 11 20 24.4 11 20 25.6 11 20 20.8 11 20 22.9 11 20 23.7 11 20 25.7 11 20 23.5 10 17 25.5 10 17 27.9 10 17 22.5 10 17 24.1 10 17 25.3 10 17 26.0 10 17 29.2 8 13 27.8 8 13 29.1 8 13 31.8 8 13 34.0 8 13 31.0 6 11 29.5 6 11 34.5 6 11 32.1 5 9 35.4 5 9 42.0 3 5 1.8 340 600 2.0 290 510 2.1 290 510 2.2 240 420 2.8 210 360 362 WV (Vdc) Cap (uF) Size (mm) 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 680 820 1000 1000 1000 1000 1200 1200 1500 1500 1500 1500 1500 1800 1800 1800 2200 2200 2200 2200 2200 2200 2700 2700 2700 2700 3300 3300 3300 3300 3300 3300 3300 3900 3900 3900 3900 3900 3900 3900 4700 4700 4700 4700 4700 4700 4700 5600 5600 5600 5600 6800 6800 6800 6800 6800 6800 8200 8200 8200 8200 8200 8200 35x90 35x100 35x120 51x60 51x65 51x75 51x65 51x75 51x75 51x80 51x85 51x100 51x105 51x85 51x96 63.5x65 51x96 51x105 51x120 51x130 63.5x75 63.5x96 51x115 63.5x85 63.5x96 63.5x105 51x130 51x145 63.5x95 63.5x100 63.5x115 63.5x120 76.2x100 51x170 63.5x105 63.5x115 63.5x130 76.2x85 76.2x96 76.2x105 63.5x125 63.5x130 76.2x95 76.2x100 76.2x105 76.2x115 76.2x120 63.5x140 63.5x155 76.2x105 76.2x130 63.5x165 76.2x115 76.2x130 76.2x140 76.2x155 89x157 63.5x210 76.2x150 76.2x155 89x120 89x130 89x157 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 2.9 170 290 3.5 140 240 4.0 110 200 3.6 110 200 3.8 110 200 4.0 110 200 4.6 97 170 4.9 97 170 5.4 74 130 5.6 74 130 5.7 74 130 6.1 74 130 6.3 74 130 6.3 63 110 6.6 63 110 6.4 63 110 7.4 52 90 7.7 52 90 8.2 52 90 8.5 52 90 7.5 52 90 8.4 52 90 8.8 42 74 8.7 42 74 9.2 42 74 9.6 42 74 10.4 34 60 10.9 34 60 10.2 34 60 10.4 34 60 11.1 34 60 11.3 34 60 11.6 34 60 12.8 29 51 11.6 29 51 12.1 29 51 12.8 29 51 11.8 29 51 12.4 29 51 12.9 29 51 13.9 24 42 14.1 24 42 13.7 24 42 14.0 24 42 14.2 24 42 14.8 24 42 15.1 24 42 15.8 20 36 16.5 20 36 16.7 20 36 18.3 20 36 17.5 17 29 17.1 17 29 17.4 17 29 18.0 17 29 18.8 17 29 20.6 17 29 22.2 14 24 21.0 14 24 21.3 14 24 20.8 14 24 21.5 14 24 23.4 14 24 RP Series WV (Vdc) Cap (uF) Size (mm) 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 10000 10000 10000 10000 10000 12000 12000 12000 12000 15000 15000 15000 18000 22000 270 330 330 390 390 470 560 680 820 820 820 1000 1000 1000 1200 1200 1500 1500 1500 1500 1500 1500 1800 1800 1800 1800 1800 2200 2200 2200 2200 2200 2200 2700 2700 2700 2700 2700 3300 3300 3300 3300 3300 3300 3300 3300 3900 3900 3900 76.2x160 76.2x170 76.2x190 89x130 89x155 76.2x220 89x155 89x190 89x219 76.2x230 89x180 89x220 89x230 100x240 35x50 35x60 35x65 35x70 35x80 35x80 35x90 35x100 35x120 51x60 51x75 51x70 51x75 51x80 51x75 51x96 51x85 51x105 51x115 51x120 63.5x65 63.5x80 51x95 51x118 51x130 63.5x75 63.5x96 51x125 51x130 63.5x85 63.5x96 63.5x100 63.5x120 51x145 63.5x90 63.5x96 63.5x115 76.2x96 51x170 63.5x105 63.5x115 63.5x130 76.2x85 76.2x96 76.2x100 76.2x120 63.5x125 63.5x130 76.2x95 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 23.9 11 20 24.5 11 20 25.8 11 20 23.8 11 20 25.7 11 20 28.0 10 17 26.1 10 17 28.6 10 17 30.5 10 17 31.9 8 13 31.1 8 13 34.0 8 13 34.6 6 11 36.0 5 9 1.7 420 740 1.8 340 600 1.9 340 600 2.1 290 510 2.2 290 510 2.4 240 420 2.9 210 360 3.1 170 290 3.6 140 240 3.3 140 240 3.6 140 240 4.3 110 200 4.5 110 200 4.6 110 200 5.0 97 170 5.6 97 170 5.8 74 130 6.4 74 130 6.7 74 130 6.8 74 130 5.9 74 130 6.4 74 130 6.6 63 110 7.3 63 110 7.6 63 110 6.8 63 110 7.5 63 110 8.4 52 90 8.6 52 90 8.1 52 90 8.5 52 90 8.6 52 90 9.4 52 90 9.9 42 74 9.0 42 74 9.3 42 74 10.1 42 74 10.3 42 74 11.9 34 60 10.8 34 60 11.2 34 60 11.8 34 60 10.9 34 60 11.5 34 60 11.7 34 60 12.6 34 60 12.7 29 51 12.9 29 51 12.5 29 51 363 WV (Vdc) Cap (uF) Size (mm) 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 3900 3900 4700 4700 4700 4700 4700 4700 4700 4700 5600 5600 5600 5600 5600 6800 6800 6800 6800 6800 6800 8200 8200 8200 8200 10000 10000 10000 10000 10000 12000 12000 15000 120 270 330 390 470 470 680 680 820 820 1000 1000 1000 1200 1500 1500 1500 1500 1800 1800 1800 2200 2200 2200 2700 2700 3300 3900 3900 4700 76.2x100 76.2x115 63.5x145 63.5x155 76.2x105 76.2x115 76.2x120 76.2x130 76.2x160 89x119 63.5x165 76.2x125 76.2x130 76.2x155 89x134 63.5x210 76.2x140 76.2x150 89x120 89x130 89x157 76.2x170 76.2x220 89x130 89x155 76.2x210 76.2x215 76.2x220 89x155 89x170 89x190 89x220 89x220 35x50 35x80 35x100 35x120 51x60 51x75 51x65 51x96 51x75 51x115 51x85 51x130 63.5x96 51x96 51x115 63.5x96 63.5x115 76.2x96 51x130 63.5x96 63.5x130 63.5x115 76.2x96 76.2x115 63.5x130 76.2x155 76.2x115 76.2x130 89x155 76.2x155 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 12.8 29 51 13.5 29 51 14.9 24 42 15.4 24 42 14.4 24 42 14.9 24 42 15.2 24 42 15.7 24 42 17.2 24 42 16.6 24 42 18.5 20 36 18.1 20 36 18.4 20 36 19.9 20 36 20.4 20 36 19.6 17 29 18.0 17 29 18.6 17 29 18.4 17 29 19.1 17 29 20.7 17 29 22.3 13 24 25.0 13 24 21.6 13 24 23.4 13 24 27.1 11 20 27.4 11 20 27.7 11 20 25.8 11 20 26.9 11 20 28.7 10 17 30.6 10 17 34.1 8 13 0.8 1260 2210 1.3 560 980 1.5 460 800 1.8 390 680 2.2 320 560 2.4 320 560 2.8 220 390 3.3 220 390 3.2 180 320 3.9 180 320 3.7 150 270 4.5 150 270 4.4 150 270 4.3 130 220 5.2 100 180 5.4 100 180 5.9 100 180 6.0 100 180 6.0 86 150 5.9 86 150 6.8 86 150 7.1 69 120 7.3 69 120 7.9 69 120 8.6 56 98 10.3 56 98 10.1 46 80 11.5 39 68 13.6 39 68 13.4 32 56 RP Series WV (Vdc) Cap (uF) Size (mm) 500 500 500 500 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 5600 6800 8200 10000 100 180 270 330 390 390 560 560 560 680 680 680 680 820 820 820 820 820 1000 1000 1200 1200 1200 1200 1500 1500 1500 1800 1800 1800 1800 89x157 89x155 89x196 89x220 35x50 35x80 35x100 35x120 51x60 51x75 51x65 51x96 63.5x96 51x75 51x96 51x115 63.5x115 51x80 51x85 51x96 51x130 63.5x130 51x96 51x105 51x105 51x115 63.5x80 76.2x96 51x130 63.5x96 76.2x115 63.5x96 63.5x118 76.2x80 76.2x96 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 14.8 27 47 16.0 22 39 18.2 18 32 22.3 15 27 0.7 1510 2650 1.1 840 1470 1.4 560 980 1.7 460 800 2.0 390 680 2.2 390 680 2.5 270 470 3.0 270 470 3.3 270 470 2.9 220 390 3.3 220 390 3.6 220 390 4.0 220 390 3.4 180 320 3.5 180 320 3.7 180 320 4.2 180 320 4.8 180 320 4.9 150 270 5.1 150 270 5.8 130 220 6.0 130 220 5.8 130 220 7.0 130 220 7.4 100 180 7.3 100 180 8.8 100 180 8.3 86 150 9.1 86 150 8.6 86 150 9.2 86 150 CapXon Useful Useful life life 2.0 I a 1.5 IR 10000H 12000H 25000H 100000H 250000H 50000H 1.0 0.0 40 Cap (uF) Size (mm) 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 630 630 630 630 630 630 630 630 630 630 1800 2200 2200 2200 2200 2200 2700 2700 2700 2700 3300 3300 3300 3900 3900 4700 4700 4700 5600 5600 5600 6800 6800 8200 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 76.2x130 63.5x118 63.5x130 76.2x96 76.2x105 76.2x155 63.5x130 76.2x105 76.2x115 76.2x130 76.2x118 76.2x130 76.2x143 76.2x143 89x120 76.2x155 89x145 89x157 76.2x190 89x145 89x155 76.2x220 89x170 89x197 63.5x130 76.2x110 76.2x130 76.2x150 89x130 89x150 89x170 89x190 100x220 100x240 RP Series 2.5 0.5 WV (Vdc) 50 60 Ta（℃） 70 80 90 depending on ambient temperature Ta versus under ripple current operating conditions 364 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 10.5 86 150 9.4 69 120 9.8 69 120 9.5 69 120 9.9 69 120 11.7 69 120 10.8 56 98 10.9 56 98 11.3 56 98 12.0 56 98 12.1 46 80 12.6 46 80 13.2 46 80 14.2 39 68 14.4 39 68 16.2 32 56 17.2 32 56 17.8 32 56 18.8 27 47 18.2 27 47 18.7 27 47 21.8 22 39 21.1 22 39 25.3 18 32 6.0 190 330 6.8 160 280 8.2 130 220 9.7 100 180 10.8 86 150 12.7 69 120 14.8 57 100 17.4 49 85 21.5 40 71 24.8 34 59 RX Series RX Series 85℃ Features Extremely Long useful life Applications ◆ High reliability ◆ Professional power supplies ◆ Frequency converters ◆ Uninterruptible power supplies Features ◆ Long useful life ◆ High reliability ◆ High reliability current capability ◆ Version with low-inductance design available ◆ All-welded construction ensures reliable electrical contact ◆ Self-extinguishing electrolyte ◆ RoHS-compatible Construction ◆ Charge-discharge proof, polar ◆ Aluminum case with insulating sleeve ◆ Poles with screw terminal connections ◆ Mounting with ring clips, clamps or threaded stud Specifications Performance Characteristics Item Operating Temperature Range -40 to +85℃ -25 to +85℃ Rated voltage VR 160 to 450 V DC 500 to 650 V DC Surge voltage VS VR 315V 1.10 VR 200 to 100000 µF Rated capacitance CR 10000 to 15000 µF Capacitance tolerance ±20%(120Hz,+20℃) Leakage Current Ileak (+20℃.max.) Ileak =0.018x(CxV) 0.85 + 4 or 5mA, whichever is smaller (after 5 minutes) Where, Ileak: Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Less than the value under table(%) Working Voltage(VDC) D.F. (%)max. 160~450 500~550 15 20 ≧600 25 d = 51 mm: approx. 17 nH Self-inductance ESL d ≧63.5 mm: approx. 20 nH Capacitors with low-inductance design: d ≧63.5 mm: approx. 15 nH Requirements: Useful life 85℃; VR,IAC,R >2000 h △C/C tanδ Ileak ≤±15% of initial value ≤1.75 times initial specified limit ≤ initial specified limit Post test requirements: Voltage Endurance test 85℃; VR 2000 h △C/C tanδ Ileak ≤±10% of initial value ≤1.3 times initial specified limit ≤ initial specified limit To IEC 60068-2-6, test Fc: Vibration Resistance test Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz, acceleration max. 10 g, duration 3x2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 120 Hz VR(V) Z-25℃ / Z 20℃ Z-40℃ / Z 20℃ Characteristics at low temperature Sectional specification 160-450 4 10 ≧500 4 - IEC 60384-4 and JIS-C-5101 Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier 50 0.8 120 1 300 1.2 1K 1.3 ≧3K 1.4 365 Screw Dissipation Factor (tanδ,at 20℃,120Hz) RX Series Dimensional drawings Ring clip/clamp mounting: CapXon 4700 µ F 450 V RX VENT 105 ℃ M5:Min.reach of screw = 8mm M6:Min.reach of screw = 12mm M8:Min.reach of screw = 16mm Dimensions Terminal M5 M5 M5 M5 M6 M8 d±2 35 51 63.5 76.2/89 76.2/89 100 Dimensions(mm) with insulating sleeve L±3 L1±3 d2max. 50~120 56.5~126.5 10.3 80~140 86.5~146.5 10.3 80~140 86.5~146.5 10.3 100~240 106.4~246.5 10.3 100~240 106.4~246.5 17.5 100~240 110~250 17.5 Packing a±0.5 12.7 22 28.6 31.8 31.8 41.5 Packing of screw length l(mm) ≤70mm >70mm ≤70mm >70mm ≤70mm >70mm all all all all Capacitor diameter d(mm) 35 42 51 63.5 76.2 89 100 Packing units (pcs.) 120 60 120 60 70 35 24 15 12 6 Accessories The following items are included in the delivery package, but are not fastened to the capacitors. For terminals Thread M5 M6 M8 Maximum torque 2 Nm 2.5 Nm 5.0 Nm 366 RX Series Case Size WV (Vdc) Cap (uF) Size (mm) 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 1000 1500 2200 2200 3300 3300 4700 4700 6800 6800 6800 10000 10000 15000 15000 22000 22000 33000 47000 47000 68000 100000 680 1000 1500 2200 2200 2200 3300 3300 4700 4700 6800 6800 10000 10000 15000 15000 15000 22000 22000 33000 47000 68000 470 680 1000 1000 1500 1500 2200 2200 3300 3300 3300 4700 4700 6800 35x60 35x80 35x80 35x100 35x120 51x80 51x80 51x100 51x100 51x140 63.5x100 63.5x100 63.5x120 76.2x100 76.2x120 76.2x140 89x130 89x140 89x170 89x220 89x220 100x250 35x50 35x60 35x80 35x100 35x120 51x80 51x80 51x100 51x140 63.5x100 51x140 63.5x120 63.5x120 76.2x120 76.2x120 76.2x140 76.2x160 76.2x160 89x140 89x170 89x220 100x250 35x60 35x80 35x80 35x100 35x100 51x80 51x80 51x100 51x100 51x140 63.5x100 63.5x100 63.5x120 63.5x120 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 2.5 110 200 3.3 68 130 3.5 48 90 3.5 48 90 4.7 32 60 4.8 32 60 5.1 22 42 6.0 22 42 6.4 15 29 7.0 15 29 7.0 15 29 9.1 10 20 10.0 10 20 12.1 7 13 13.0 7 13 17.0 6.0 11 18.0 6.0 11 19.3 5.0 9 20.7 4.0 7 23.0 4.0 7 23.2 3.5 6 24.5 3.0 5 1.9 150 290 2.6 110 200 3.4 68 130 3.6 48 90 4.0 48 90 4.0 48 90 4.8 32 60 5.0 32 60 6.5 22 42 6.5 22 42 7.4 15 29 8.0 15 29 10.3 10 20 13.1 10 20 13.4 7 13 15.0 7 13 16.1 7 13 17.4 6 9 17.8 6 9 19.6 4 7 21.0 3 5.8 22.7 3 5 2.7 220 420 2.8 150 290 3.0 110 200 3.3 110 200 3.6 68 130 3.7 68 130 4.1 48 90 5.5 48 90 5.5 32 60 6.0 32 60 6.0 32 60 7.4 22 42 8.0 22 42 9.0 15 29 367 WV (Vdc) Cap (uF) Size (mm) 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 6800 10000 10000 10000 15000 15000 22000 22000 33000 47000 330 470 680 820 1000 1000 1000 1200 1200 1500 1500 1800 1800 1800 2200 2200 2700 2700 2700 2700 3300 3300 3300 3300 3900 3900 3900 4700 4700 4700 4700 5600 5600 5600 5600 6800 6800 6800 6800 6800 8200 8200 8200 8200 8200 8200 8200 10000 76.2x120 76.2x120 76.2x160 89x140 89x140 89x170 89x170 89x220 89x220 100x250 35x60 35x80 35x100 35x80 35x100 51x60 51x80 51x60 51x83 51x75 51x100 51x75 51x90 63.5x96 51x105 51x120 51x105 51x115 63.5x80 63.5x85 51x115 51x130 63.5x90 63.5x100 63.5x100 63.5x115 76.2x80 63.5x105 63.5x115 76.2x90 76.2x120 63.5x130 63.5x150 76.2x100 76.2x115 63.5x140 63.5x155 76.2x105 76.2x115 89x100 63.5x170 63.5x190 76.2x120 76.2x143 76.2x155 89x105 89x120 76.2x140 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 10.0 15 29 13.3 10 20 14.0 10 20 14.0 10 20 16.5 7 13 18.0 7 13 18.3 5 9 22.4 5 9 22.5 3 6 28.5 3 5 2.1 320 600 3.0 220 420 3.8 150 290 4.1 130 240 4.5 110 200 4.0 110 200 5.7 110 200 5.0 89 170 5.8 89 170 6.0 68 130 7.0 68 130 6.8 58 110 7.4 58 110 8.5 58 110 8.5 48 90 9.0 48 90 9.4 39 74 10.6 39 74 9.8 39 74 10.1 39 74 10.8 32 60 12.5 32 60 12.0 32 60 12.5 32 60 13.0 27 51 13.9 27 51 13.0 27 51 14.0 22 42 14.5 22 42 14.0 22 42 16.0 22 42 17.4 19 36 19.0 19 36 16.8 19 36 18.0 19 36 19.0 15 29 19.6 15 29 19.0 15 29 20.0 15 29 20.0 15 29 20.7 13 24 22.0 13 24 20.0 13 24 21.0 13 24 22.5 13 24 20.0 13 24 22.0 13 24 24.0 10 20 RX Series WV (Vdc) Cap (uF) Size (mm) 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 10000 10000 10000 12000 12000 12000 12000 15000 15000 15000 15000 18000 18000 18000 22000 22000 220 330 470 680 680 680 820 1000 1000 1200 1200 1500 1500 1500 1800 1800 2200 2200 2200 2200 2200 2700 2700 2700 2700 2700 3300 3300 3300 3300 3300 3300 3300 3900 3900 3900 3900 4700 4700 4700 5600 5600 5600 5600 76.2x155 89x130 89x155 76.2x170 89x130 89x155 89x170 76.2x220 89x155 89x170 89x190 89x180 89x220 100x190 89x220 100x250 35x50 35x60 35x80 35x80 35x120 51x80 35x100 51x60 51x80 51x70 51x83 51x80 51x95 63.5x95 51x85 51x95 51x105 51x115 63.5x85 63.5x100 76.2x105 51x115 51x130 63.5x90 63.5x105 76.2x75 51x130 51x150 63.5x95 63.5x115 76.2x90 76.2x105 76.2x120 63.5x100 63.5x115 76.2x90 76.2x120 63.5x120 63.5x155 76.2x105 63.5x145 63.5x155 63.5x170 76.2x105 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 25.0 10 20 27.0 10 20 29.0 10 20 27.6 9 17 27.5 9 17 29.5 9 17 31.0 9 17 35.4 7 13 33.8 7 13 35.1 7 13 36.0 7 13 43.8 6 11 44.6 6 11 48.0 6 11 46.7 5 9 48.0 5 9 1.9 470 900 2.3 320 600 4.4 220 420 4.5 150 290 5.0 150 290 6.0 150 290 4.7 130 240 4.8 110 200 6.2 110 200 5.0 89 170 6.5 89 170 6.4 68 130 7.0 68 130 8.0 68 130 7.0 58 110 7.4 58 110 8.8 48 90 10.0 48 90 10.1 48 90 11.5 48 90 12.5 48 90 10.8 39 74 11.0 39 74 11.0 39 74 12.0 39 74 11.6 39 74 12.8 32 60 14.0 32 60 13.0 32 60 14.0 32 60 14.0 32 60 14.3 32 60 15.0 32 60 14.2 27 51 15.2 27 51 15.1 27 51 16.5 27 51 16.0 22 42 17.5 22 42 15.5 22 42 18.0 19 36 18.2 19 36 19.0 19 36 17.0 19 36 368 WV (Vdc) Cap (uF) Size (mm) 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 5600 5600 6800 6800 6800 6800 6800 6800 8200 8200 8200 8200 8200 10000 10000 10000 10000 12000 12000 12000 15000 15000 18000 18000 22000 820 1000 1200 1800 1800 2200 2700 2700 3300 3300 3300 3900 3900 3900 4700 4700 4700 4700 5600 5600 5600 5600 6800 6800 6800 6800 8200 8200 8200 10000 10000 10000 10000 12000 12000 76.2x130 89x92 63.5x160 63.5x190 76.2x130 76.2x150 89x105 89x120 76.2x135 76.2x155 76.2x170 89x120 89x140 76.2x160 76.2x180 89x130 89x155 76.2x220 89x155 89x170 89x180 89x200 89x210 89x240 100x240 51x60 51x70 51x80 51x95 51x105 51x115 51x120 63.5x90 51x130 63.5x105 76.2x105 63.5x115 63.5x130 76.2x90 63.5x143 63.5x155 76.2x105 76.2x143 63.5x170 76.2x115 76.2x130 89x90 76.2x143 76.2x155 89x105 89x115 76.2x170 89x115 89x130 76.2x180 76.2x220 89x143 89x155 76.2x220 89x155 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 19.0 19 36 18.0 19 36 23.5 15 29 24.2 15 29 19.2 15 29 21.5 15 29 21.2 15 29 22.3 15 29 24.0 13 24 25.0 13 24 26.2 13 24 25.0 13 24 26.0 13 24 31.6 10 20 33.0 10 20 31.0 10 20 34.0 10 20 34.0 9 17 30.0 9 17 31.3 9 17 39.9 7 13 40.7 7 13 43.0 6 11 45.0 6 11 47.0 5 9 3.8 130 240 5.1 110 200 6.6 89 170 7.6 58 110 8.0 58 110 10.1 48 90 11.0 39 74 11.0 39 74 13.0 32 60 13.5 32 60 14.6 32 60 15.8 27 51 16.4 27 51 15.5 27 51 17.0 22 42 17.8 22 42 15.7 22 42 17.5 22 42 19.2 19 36 17.5 19 36 19.2 19 36 18.1 19 36 21.1 15 29 22.0 15 29 19.9 15 29 20.5 15 29 27.1 13 24 25.0 13 24 26.2 13 24 34.0 10 20 37.0 10 20 33.0 10 20 35.0 10 20 35.0 9 17 31.1 9 17 RX Series WV (Vdc) Cap (uF) Size (mm) 420 420 420 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 12000 15000 18000 220 330 470 470 680 680 680 820 820 1000 1000 1200 1200 1200 1500 1500 1800 1800 1800 1800 2200 2200 2200 2200 2200 2700 2700 2700 2700 2700 2700 3300 3300 3300 3300 3900 3900 3900 3900 3900 4700 4700 4700 4700 4700 5600 5600 5600 5600 5600 5600 6800 6800 8200 8200 8200 8200 89x170 89x190 89x220 35x50 35x60 35x80 51x75 35x100 35x120 51x80 35x110 51x60 51x70 51x80 51x80 51x95 63.5x95 51x95 51x115 51x105 51x115 63.5x80 63.5x105 51x115 51x130 63.5x90 63.5x120 76.2x85 51x115 51x130 63.5x95 63.5x115 76.2x80 76.2x130 63.5x105 63.5x115 76.2x100 76.2x120 63.5x125 63.5x150 76.2x90 76.2x115 89x90 63.5x145 63.5x170 76.2x105 76.2x130 89x110 63.5x165 63.5x190 76.2x115 76.2x130 89x90 89x120 89x105 89x130 76.2x165 76.2x180 89x130 89x155 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 31.7 9 17 40.1 7 13 43.3 6 11 2.0 470 900 2.5 320 600 4.5 220 420 4.5 220 420 4.6 150 290 5.2 150 290 6.2 150 290 6.4 130 240 6.0 130 240 6.3 110 200 6.5 110 200 7.0 89 170 7.3 89 170 8.3 89 170 7.5 68 130 7.8 68 130 8.2 58 110 8.4 58 110 8.0 58 110 8.5 58 110 10.2 48 90 11.0 48 90 10.0 48 90 12.1 48 90 11.0 48 90 11.2 39 74 12.0 39 74 12.0 39 74 13.0 39 74 12.0 39 74 14.8 39 74 13.6 32 60 14.0 32 60 15.0 32 60 16.0 32 60 16.0 27 51 16.6 27 51 15.0 27 51 17.0 27 51 17.0 27 51 18.7 22 42 20.0 22 42 18.0 22 42 20.0 22 42 20.0 22 42 21.7 19 36 23.2 19 36 20.5 19 36 21.6 19 36 20.2 19 36 22.8 19 36 22.8 15 29 25.0 15 29 27.0 13 24 30.0 13 24 29.0 13 24 31.0 13 24 369 WV (Vdc) Cap (uF) Size (mm) 450 450 450 450 450 450 450 450 450 450 450 450 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 10000 10000 10000 12000 12000 12000 12000 15000 15000 15000 18000 22000 1000 1000 1000 1200 1200 1200 1500 1500 1500 1500 1800 1800 1800 2200 2200 2200 2200 2700 2700 2700 2700 3300 3300 3300 3300 3900 3900 3900 3900 3900 4700 4700 4700 4700 5600 5600 5600 5600 6800 6800 6800 6800 8200 8200 8200 8200 10000 10000 76.2x220 89x155 89x170 76.2x220 89x155 89x190 100x190 89x220 89x240 100x195 100x237 89x236 51x95 51x110 63.5x80 51x95 51x115 63.5x85 51x100 51x115 63.5x90 63.5x105 51x130 63.5x90 63.5x115 51x143 51x150 63.5x105 63.5x115 63.5x115 63.5x143 76.2x90 76.2x110 63.5x130 63.5x150 76.2x105 76.2x115 63.5x170 76.2x115 76.2x130 89x90 89x120 76.2x135 76.2x150 89x105 89x130 76.2x143 76.2x170 89x115 89x130 76.2x180 76.2x190 89x143 89x170 76.2x220 89x155 89x175 100x175 89x190 89x220 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 37.5 10 20 36.1 10 20 37.6 10 20 39.1 9 17 36.4 9 17 39.9 9 17 42.5 9 17 43.5 7 13 45.3 7 13 43.9 7 13 48.0 6 11 48.0 5 9 5.6 140 270 6.0 140 270 6.0 140 270 7.1 120 220 8.0 120 220 8.1 120 220 7.2 95 180 7.5 95 180 7.5 95 180 7.8 95 180 8.3 79 150 8.2 79 150 8.6 79 150 12.1 63 120 12.5 63 120 11.5 63 120 12.2 63 120 13.2 52 98 13.8 52 98 12.2 52 98 13.1 52 98 14.3 42 80 15.1 42 80 15.1 42 80 16.0 42 80 17.2 36 68 17.5 36 68 18.2 36 68 17.8 36 68 19.5 36 68 20.5 30 56 21.8 30 56 20.0 30 56 22.0 30 56 20.0 25 47 20.8 25 47 18.2 25 47 19.5 25 47 31.0 21 39 31.5 21 39 30.6 21 39 31.8 21 39 31.8 17 32 32.0 17 32 33.0 17 32 34.1 17 32 38.3 14 27 39.5 14 27 RX Series WV (Vdc) Cap (uF) Size (mm) 500 500 500 500 500 500 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 10000 12000 12000 12000 12000 15000 1200 1200 1500 1500 1800 1800 1800 2200 2200 2700 2700 2700 3300 3300 3300 3900 3900 4700 4700 4700 5600 5600 5600 6800 100x190 89x220 89x240 100x210 100x240 100x250 51x110 63.5x110 51x130 63.5x130 63.5x105 63.5x120 76.2x110 63.5x120 76.2x130 63.5x150 76.2x105 76.2x155 63.5x170 76.2x130 76.2x155 76.2x140 89x150 76.2x170 89x130 89x170 76.2x190 89x150 89x190 89x170 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 41.5 14 27 39.1 12 22 40.5 12 22 41.6 12 22 42.4 12 22 43.5 9 18 6.4 120 220 8.0 120 220 7.7 95 180 9.0 95 180 8.7 79 150 9.0 79 150 10.0 79 150 10.3 63 120 13.0 63 120 12.5 52 98 12.3 52 98 16.0 52 98 15.2 42 80 15.6 42 80 17.0 42 80 18.4 36 68 21.0 36 68 22.2 30 56 23.2 30 56 25.0 30 56 25.0 25 47 24.5 25 47 27.2 25 47 27.5 21 39 CapXon Useful life Useful life 2.0 I a 1.5 IR 20000H 25000H 50000H 100000H 250000H 200000H 1.0 0.0 40 Cap (uF) Size (mm) 550 550 550 550 550 550 550 600 600 600 600 600 600 600 600 600 600 600 600 600 600 650 650 650 650 650 650 650 650 650 6800 8200 8200 8200 10000 10000 10000 1200 1500 1800 1800 2200 2200 2700 2700 3300 3900 3900 4700 4700 5600 1000 1200 1500 1800 2200 2700 3300 3900 4700 89x190 89x220 100x170 100x220 89x240 100x200 100x250 63.5x95 63.5x110 63.5x125 76.2x95 63.5x145 76.2x110 63.5x170 76.2x125 76.2x145 76.2x170 89x130 76.2x190 89x150 89x170 63.5x100 63.5x110 63.5x130 63.5x150 63.5x170 76.2x150 76.2x170 89x155 89x190 RX Series 2.5 0.5 WV (Vdc) 50 60 Ta（℃） 70 80 90 depending on ambient temperature Ta versus under ripple current operating conditions 370 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 28.9 21 39 36.5 17 32 35.0 17 32 40.0 17 32 42.5 14 27 42.4 14 27 43.0 14 27 7.0 150 280 8.4 120 220 9.7 95 180 9.5 95 180 11.4 79 150 11.2 79 150 13.5 63 120 13.2 63 120 15.5 53 100 21.1 45 85 19.8 45 85 22.5 37 71 24.0 37 71 26.0 31 59 7.2 170 330 8.0 150 280 9.2 120 220 10.5 95 180 12.3 79 150 14.5 63 120 16.8 53 100 22.0 45 85 28.0 37 71 RU Series RU Series 105℃ Features Extremely Long useful life Applications ◆ High reliability ◆ Professional power supplies ◆ Frequency converters ◆ Uninterruptible power supplies Features ◆ Long useful life ◆ High reliability ◆ High reliability current capability ◆ Version with low-inductance design available ◆ All-welded construction ensures reliable electrical contact ◆ Self-extinguishing electrolyte ◆ RoHS-compatible Construction ◆ Charge-discharge proof, polar ◆ Aluminum case with insulating sleeve ◆ Poles with screw terminal connections ◆ Mounting with ring clips, clamps or threaded stud Specifications Performance Characteristics Item Operating Temperature Range -40 to +85℃ Rated voltage VR 160 to 450 V DC Surge voltage VS -25 to +85℃ 500 V DC VR 315V 1.10 VR 1000 to 33000 µF Rated capacitance CR 820 to 10000 µF Capacitance tolerance ±20%(120Hz,+20℃) Leakage Current Ileak (+20℃.max.) Ileak =0.018x(CxV) 0.85 + 4 or 5mA, whichever is smaller (after 5 minutes) Where, Ileak: Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Less than the value under table(%) Working Voltage(VDC) D.F. (%)max. 160~450 500~550 15 20 ≧600 25 d = 51 mm: approx. 17 nH Self-inductance ESL d ≧63.5 mm: approx. 20 nH Capacitors with low-inductance design: d ≧63.5 mm: approx. 15 nH Requirements: Useful life 85℃; VR,IAC,R >12000 h △C/C tanδ Ileak ≤±15% of initial value ≤1.75 times initial specified limit ≤ initial specified limit Post test requirements: Voltage Endurance test 85℃; VR 2000 h △C/C tanδ Ileak ≤±10% of initial value ≤1.3 times initial specified limit ≤ initial specified limit To IEC 60068-2-6, test Fc: Vibration Resistance test Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz, acceleration max. 10 g, duration 3x2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 120 Hz VR(V) Z-25℃ / Z 20℃ Z-40℃ / Z 20℃ Characteristics at low temperature Sectional specification 160-450 4 10 ≧500 4 - IEC 60384-4 and JIS-C-5101 Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier 50 0.8 120 1 300 1.2 1K 1.3 ≧3K 1.4 371 Screw Dissipation Factor (tanδ,at 20℃,120Hz) RU Series Dimensional drawings Ring clip/clamp mounting: CapXon 4700 µ F 450 V RU VENT 85 ℃ M5:Min.reach of screw = 8mm M6:Min.reach of screw = 12mm M8:Min.reach of screw = 16mm Dimensions Terminal M5 M5 M5 M5 M6 M8 d±2 35 51 63.5 76.2/89 76.2/89 100 Dimensions(mm) with insulating sleeve L±3 L1±3 d2max. 50~120 56.5~126.5 10.3 80~140 86.5~146.5 10.3 80~140 86.5~146.5 10.3 100~240 106.4~246.5 10.3 100~240 106.4~246.5 17.5 100~240 110~250 17.5 Packing a±0.5 12.7 22 28.6 31.8 31.8 41.5 Packing of screw length l(mm) ≤70mm >70mm ≤70mm >70mm ≤70mm >70mm all all all all Capacitor diameter d(mm) 35 42 51 63.5 76.2 89 100 Packing units (pcs.) 120 60 120 60 70 35 24 15 12 6 Accessories The following items are included in the delivery package, but are not fastened to the capacitors. For terminals For mounting Thread M5 M6 M8 M12 Maximum torque 2 Nm 2.5 Nm 5.0 Nm 10 Nm 372 RU Series Case Size WV (Vdc) Cap (uF) Size (mm) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 3300 3900 4700 4700 5600 5600 6800 8200 8200 10000 10000 12000 15000 15000 18000 18000 22000 22000 27000 27000 33000 2700 3300 3900 3900 4700 4700 5600 6800 6800 8200 8200 10000 10000 12000 12000 15000 15000 18000 18000 22000 22000 27000 1500 1800 2200 2200 2200 2700 2700 3300 3300 3900 3900 3900 4700 4700 5600 51x80 51x95 51x105 63.5x80 51x115 63.5x95 63.5x95 63.5x115 76.2x95 63.5x130 76.2x105 76.2x115 76.2x140 89x120 76.2x155 89x140 76.2x190 89x170 76.2x220 89x195 89x220 51x80 51x80 51x105 63.5x80 51x130 63.5x95 63.5x95 63.5x115 76.2x95 63.5x130 76.2x105 76.2x115 89x120 76.2x140 89x120 76.2x160 89x140 76.2x190 89x170 76.2x220 89x195 89x220 51x80 51x80 51x80 51x95 63.5x80 51x95 63.5x80 51x115 63.5x90 51x130 63.5x95 63.5x105 63.5x105 76.2x95 63.5x120 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 8.6 33 60 9.8 28 51 11.3 24 42 11.4 24 42 12.4 20 36 12.9 20 36 14.0 16 29 17.6 13 24 18.0 13 24 19.8 11 20 20.0 11 20 22.3 9 17 27.8 7 13 28.4 7 13 30.5 6 11 31.8 6 11 34.6 5 9 35.9 5 9 39.4 4 7 40.6 4 7 45.9 3 6 7.3 41 74 8.9 33 60 9.9 28 51 10.0 28 51 11.6 24 42 11.7 24 42 12.3 20 36 15.4 16 29 15.8 16 29 17.4 13 24 17.6 13 24 20.2 11 20 22.5 11 20 24.2 9 17 24.7 9 17 27.5 7 13 28.3 7 13 30.6 6 11 31.7 6 11 34.8 5 9 35.9 5 9 40.8 4 7 6.4 72 130 9.5 61 110 9.7 50 90 10.8 50 90 11.3 50 90 12.0 41 74 12.6 41 74 14.3 33 60 14.5 33 60 16.2 28 51 16.3 28 51 16.6 28 51 17.9 24 42 19.3 24 42 19.4 20 36 373 WV (Vdc) Cap (uF) Size (mm) 350 350 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 5600 6800 6800 6800 8200 8200 10000 10000 12000 12000 15000 15000 18000 22000 1000 1500 1800 2200 2200 2700 2700 3300 3300 3900 3900 4700 4700 5600 5600 6800 6800 8200 8200 10000 10000 12000 12000 15000 15000 18000 1200 1500 1800 1800 2200 2200 2700 2700 3300 3300 3900 3900 4700 5600 5600 6800 8200 8200 76.2x95 63.5x140 76.2x105 89x100 76.2x115 89x120 76.2x140 89x120 76.2x170 89x140 76.2x190 89x160 89x195 89x220 51x80 51x80 51x95 51x100 63.5x80 51x115 63.5x95 51x130 63.5x105 63.5x105 76.2x95 63.5x130 76.2x95 63.5x140 76.2x115 76.2x130 89x120 76.2x155 89x120 76.2x165 89x140 76.2x220 89x160 76.2x230 89x180 89x220 51x80 51x80 51x105 63.5x80 51x115 63.5x95 63.5x95 76.2x95 63.5x115 76.2x95 63.5x130 76.2x105 76.2x115 76.2x130 89x120 76.2x155 76.2x190 89x170 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 20.2 20 36 23.2 16 29 23.1 16 29 25.0 16 29 25.1 13 24 29.6 13 24 32.1 11 20 33.2 11 20 35.3 9 17 37.3 9 17 41.0 7 13 41.9 7 13 48.1 6 11 50.5 5 9 4.6 110 200 7.0 72 130 10.0 61 110 11.2 50 90 11.6 50 90 13.2 41 74 13.9 41 74 14.6 33 60 15.0 33 60 16.1 28 51 18.3 28 51 20.2 24 42 20.0 24 42 21.5 20 36 21.8 20 36 25.2 16 29 27.3 16 29 29.2 13 24 29.1 13 24 32.5 11 20 34.7 11 20 39.5 8 17 38.0 8 17 42.1 7 13 41.6 7 13 46.4 6 11 7.1 94 170 7.8 72 130 9.6 61 110 9.8 61 110 11.0 50 90 11.4 50 90 12.6 41 74 14.2 41 74 14.4 33 60 15.0 33 60 16.2 28 51 16.3 28 51 20.4 24 42 22.9 20 36 24.2 20 36 27.3 16 29 29.6 13 24 30.7 13 24 RU Series WV (Vdc) Cap (uF) Size (mm) 450 450 450 500 500 500 500 500 500 500 500 500 500 10000 10000 12000 820 1000 1200 1200 1500 1500 1800 1800 2200 2700 76.2x220 89x170 89x195 51x80 51x95 51x95 63.5x80 51x115 63.5x80 51x130 63.5x95 63.5x105 63.5x115 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 32.6 11 20 33.4 11 20 37.7 9 17 5.1 180 320 5.8 150 270 6.6 120 220 7.0 120 220 7.7 100 180 7.8 100 180 8.8 83 150 8.8 83 150 10.0 67 120 11.5 55 98 CapXon Useful Useful life life 2.0 I a 1.5 IR 12000H 25000H 50000H 100000H 250000H 175000H 1.0 0.0 40 Cap (uF) Size (mm) 500 500 500 500 500 500 500 500 500 500 500 500 2700 3300 3300 3900 4700 5600 5600 6800 6800 8200 8200 10000 76.2x95 63.5x140 76.2x115 76.2x130 76.2x120 76.2x165 89x140 76.2x190 89x170 76.2x220 89x195 89x220 RU Series 2.5 0.5 WV (Vdc) 50 60 Ta（℃） 70 80 90 depending on ambient temperature Ta versus under ripple current operating conditions 374 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 11.9 55 98 13.2 45 80 13.5 45 80 15.1 38 68 18.7 31 56 19.9 26 47 20.8 26 47 22.8 22 39 23.5 22 39 26.2 18 32 26.6 18 32 30.4 15 27 RJ Series RJ Series 85℃ Features Long useful life Applications ◆ Professional power supplies ◆ Frequency converters ◆ Uninterruptible power supplies Features ◆ Long useful life ◆ High reliability ◆ Version with low-inductance design available ◆ All-welded construction ensures reliable electrical contact ◆ Self-extinguishing electrolyte ◆ RoHS-compatible Construction ◆ Charge-discharge proof, polar ◆ Aluminum case with insulating sleeve ◆ Poles with screw terminal connections ◆ Mounting with ring clips, clamps or threaded stud Specifications Performance Characteristics Item Operating Temperature Range -40 to +85℃ Rated voltage VR 350 to 450 V DC Surge voltage VS VR 315V 1.10 VR 150 to 22000 µF Rated capacitance CR Capacitance tolerance ±20%(120Hz,+20℃) Leakage Current Ileak (+20℃.max.) Ileak =0.018x(CxV) 0.85 + 4 or 5mA, whichever is smaller (after 5 minutes) Where, Ileak: Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Less than the value under table(%) Working Voltage(VDC) D.F. (%)max. 350~450 15 d = 51 mm: approx. 17 nH Self-inductance ESL d ≧63.5 mm: approx. 20 nH Capacitors with low-inductance design: d ≧63.5 mm: approx. 15 nH Requirements: Useful life 85℃; VR,IAC,R >10000 h △C/C tanδ Ileak ≤±15% of initial value ≤1.75 times initial specified limit ≤ initial specified limit Post test requirements: Voltage Endurance test 85℃; VR 2000 h △C/C tanδ Ileak ≤±10% of initial value ≤1.3 times initial specified limit ≤ initial specified limit To IEC 60068-2-6, test Fc: Vibration Resistance test Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz, acceleration max. 10 g, duration 3x2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 120 Hz VR(V) Z-25℃ / Z 20℃ Z-40℃ / Z 20℃ Characteristics at low temperature Sectional specification 350-450 4 10 IEC 60384-4 and JIS-C-5101 Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier 50 0.8 120 1 300 1.2 1K 1.3 ≧3K 1.4 375 Screw Dissipation Factor (tanδ,at 20℃,120Hz) RJ Series Dimensional drawings Threaded stud mounting CapXon 4700 µ F 450 V RJ VENT 85 ℃ M5:Min.reach of screw = 8mm M6:Min.reach of screw = 12mm M8:Min.reach of screw = 16mm Dimensions Terminal M5 M5/M6 M5/M6 M8 d±2 63.5 76.2/89 76.2/89 100 L±3 80~140 100~240 100~240 100~240 Dimensions(mm) with insulating sleeve L1±3 L2+/-1 d1 86.5~146.5 16 M12 106.4~246.5 16 M12 106.4~246.5 16 M12 110~250 16 M12 Packing d2max. 10.3 10.3 17.5 17.5 a±0.5 28.6 31.8 31.8 41.5 Packing of screw length l(mm) all all all all Capacitor diameter d(mm) 63.5 76.2 89 100 Packing units (pcs.) 24 15 12 6 Accessories The following items are included in the delivery package, but are not fastened to the capacitors. For terminals For mounting Thread M5 M6 M8 M12 Maximum torque 2 Nm 2.5 Nm 5.0 Nm 10 Nm 376 RJ Series Case Size WV (Vdc) Cap (uF) Size (mm) 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 400 400 400 2700 3300 3900 4700 4700 4700 5600 6800 6800 6800 8200 10000 10000 12000 12000 15000 15000 18000 22000 2700 3300 3300 3900 3900 4700 4700 5600 6800 63.5x80 63.5x100 63.5x105 63.5x120 63.5x140 76.2x100 63.5x140 76.2x120 76.2x140 89x100 76.2x160 76.2x160 89x120 76.2x180 76.2x220 89x160 89x220 89x220 89x230 63.5x105 63.5x100 63.5x120 76.2x100 76.2x105 76.2x100 76.2x120 76.2x140 76.2x140 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 12.8 42 74 14.2 34 60 14.6 29 51 15.0 24 42 15.5 24 42 19.7 24 42 21.5 20 36 22.5 17 29 24.0 17 29 23.0 17 29 26.0 14 24 27.5 11 20 26.0 11 20 29.0 10 17 32.0 10 17 34.0 8 13 39.0 8 13 40.0 6 11 42.0 5 9 10.8 42 74 11.0 34 60 12.0 34 60 14.0 29 51 14.3 29 51 15.7 24 42 17.0 24 42 18.8 20 36 22.0 17 29 CapXon Useful Useful life life 2.0 I a 1.5 IR 10000H 12000H 25000H 100000H 250000H 50000H 1.0 0.0 40 Cap (uF) Size (mm) 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 6800 8200 10000 10000 12000 12000 15000 15000 15000 18000 1500 2200 2200 2200 2700 3300 3300 3300 3900 3900 4700 4700 4700 5600 6800 8200 10000 10000 76.2x160 76.2x160 76.2x160 89x130 89x160 89x220 76.2x230 89x180 89x220 89x240 63.5x80 63.5x100 63.5x105 63.5x120 76.2x105 63.5x120 63.5x140 76.2x120 76.2x120 76.2x140 76.2x120 76.2x140 76.2x160 76.2x160 76.2x160 76.2x220 76.2x220 89x170 RJ Series 2.5 0.5 WV (Vdc) 50 60 Ta（℃） 70 80 90 depending on ambient temperature Ta versus under ripple current operating conditions 377 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 23.0 17 29 23.5 14 24 24.0 11 20 25.0 11 20 25.5 10 17 28.5 10 17 33.0 8 13 32.0 8 13 35.0 8 13 38.0 6 11 11.4 74 130 12.5 52 90 12.8 52 90 13.5 52 90 14.6 42 74 15.0 34 60 16.0 34 60 17.7 34 60 18.0 29 51 19.0 29 51 18.3 24 42 19.6 24 42 20.5 24 42 21.0 20 36 22.0 17 29 25.6 14 24 26.0 11 20 26.0 11 20 RY Series RY Series 85℃ Features Extremely Long useful life Applications ◆ High reliability ◆ Professional power supplies ◆ Frequency converters ◆ Uninterruptible power supplies Features ◆ Long useful life ◆ High reliability ◆ High reliability current capability ◆ Version with low-inductance design available ◆ All-welded construction ensures reliable electrical contact ◆ Self-extinguishing electrolyte ◆ RoHS-compatible Construction ◆ Charge-discharge proof, polar ◆ Aluminum case with insulating sleeve ◆ Poles with screw terminal connections ◆ Mounting with ring clips, clamps or threaded stud Specifications Performance Characteristics Item Operating Temperature Range -40 to +85℃ Rated voltage VR 350 to 450 V DC Surge voltage VS VR 315V 1.10 VR 150 to 22000 µF Rated capacitance CR Capacitance tolerance ±20%(120Hz,+20℃) Leakage Current Ileak (+20℃.max.) Ileak =0.018x(CxV) 0.85 + 4 or 5mA, whichever is smaller (after 5 minutes) Where, Ileak: Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Screw Dissipation Factor (tanδ,at 20℃,120Hz) Less than the value under table(%) Working Voltage(VDC) D.F. (%)max. 350~450 15 d = 51 mm: approx. 17 nH Self-inductance ESL d ≧63.5 mm: approx. 20 nH Capacitors with low-inductance design: d ≧63.5 mm: approx. 15 nH Requirements: Useful life 85℃; VR,IAC,R >10000 h △C/C tanδ Ileak ≤±15% of initial value ≤1.75 times initial specified limit ≤ initial specified limit Post test requirements: Voltage Endurance test 85℃; VR 2000 h △C/C tanδ Ileak ≤±10% of initial value ≤1.3 times initial specified limit ≤ initial specified limit To IEC 60068-2-6, test Fc: Vibration Resistance test Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz, acceleration max. 10 g, duration 3x2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 120 Hz VR(V) Z-25℃ / Z 20℃ Z-40℃ / Z 20℃ Characteristics at low temperature Sectional specification 350-450 4 10 IEC 60384-4 and JIS-C-5101 Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier 50 0.8 120 1 300 1.2 1K 1.3 ≧3K 1.4 378 RY Series Dimensional drawings Threaded stud mounting CapXon 4700 µ F 450 V RY VENT 85 ℃ M5:Min.reach of screw = 8mm M6:Min.reach of screw = 12mm M8:Min.reach of screw = 16mm Dimensions Terminal M5 M5/M6 M5/M6 M8 d±2 63.5 76.2/89 76.2/89 100 L±3 80~140 100~240 100~240 100~240 Dimensions(mm) with insulating sleeve L1±3 L2+/-1 d1 86.5~146.5 16 M12 106.4~246.5 16 M12 106.4~246.5 16 M12 110~250 16 M12 Packing d2max. 10.3 10.3 17.5 17.5 a±0.5 28.6 31.8 31.8 41.5 Packing of screw length l(mm) all all all all Capacitor diameter d(mm) 63.5 76.2 89 100 Packing units (pcs.) 24 15 12 6 Accessories The following items are included in the delivery package, but are not fastened to the capacitors. For terminals For mounting Thread M5 M6 M8 M12 Maximum torque 2 Nm 2.5 Nm 5.0 Nm 10 Nm 379 RY Series Case Size WV (Vdc) Cap (uF) Size (mm) 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 400 2700 3300 3900 4700 4700 4700 5600 5600 6800 6800 6800 8200 8200 10000 10000 12000 12000 12000 15000 15000 15000 18000 22000 2700 3300 3300 3900 3900 4700 4700 63.5x80 63.5x100 63.5x105 63.5x120 63.5x140 76.2x100 63.5x140 76.2x105 76.2x120 76.2x140 89x100 76.2x140 76.2x160 76.2x160 89x120 76.2x180 76.2x220 89x145 76.2x220 89x160 89x220 89x220 89x230 63.5x105 63.5x100 63.5x120 76.2x100 76.2x105 76.2x100 76.2x120 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 16.0 41 74 19.0 33 60 21.0 28 51 22.0 24 42 23.5 24 42 24.0 24 42 28.0 20 36 30.0 20 36 31.0 16 29 33.0 16 29 34.0 16 29 36.0 13 24 38.0 13 24 42.0 11 20 42.0 11 20 45.0 9 17 49.0 9 17 51.0 9 17 53.0 7 13 53.0 7 13 55.0 7 13 58.0 6 11 60.0 5 9 17.0 41 74 20.0 33 60 21.5 33 60 23.0 28 51 23.5 28 51 26.0 24 42 28.0 24 42 CapXon Useful Useful life life 2.0 I a 1.5 IR 12000H 25000H 50000H 100000H 250000H 175000H 1.0 0.0 40 Cap (uF) Size (mm) 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 5600 6800 6800 8200 10000 10000 12000 12000 15000 15000 15000 18000 1500 2200 2200 2200 2700 3300 3300 3300 3900 3900 4700 4700 4700 5600 6800 8200 10000 10000 76.2x140 76.2x140 76.2x160 76.2x160 76.2x190 89x160 89x160 89x220 76.2x230 89x180 89x220 89x240 63.5x80 63.5x100 63.5x105 63.5x120 76.2x105 63.5x140 76.2x100 76.2x120 76.2x120 76.2x140 76.2x120 76.2x140 76.2x160 76.2x160 76.2x160 76.2x220 76.2x220 89x170 RY Series 2.5 0.5 WV (Vdc) 50 60 Ta（℃） 70 80 90 depending on ambient temperature Ta versus under ripple current operating conditions 380 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 30.0 20 36 33.0 16 29 35.0 16 29 36.5 13 24 38.0 11 20 39.0 11 20 41.0 9 17 46.0 9 17 48.0 7 13 52.0 7 13 57.0 7 13 60.0 6 11 13.0 72 130 14.0 50 90 15.0 50 90 16.0 50 90 18.0 41 74 23.0 33 60 23.0 33 60 25.0 33 60 25.0 28 51 26.7 28 51 27.0 24 42 28.0 24 42 29.0 24 42 31.5 20 36 32.0 16 29 36.0 13 24 40.0 11 20 40.0 11 20 RK Series RK Series 105℃ Features General capacitors Applications ◆ Professional power supplies ◆ Frequency converters ◆ Uninterruptible power supplies Features ◆ Wide temperature range ◆ All-welded construction ensures reliable electrical contact ◆ Self-extinguishing electrolyte ◆ RoHS-compatible Construction ◆ Charge-discharge proof, polar ◆ Aluminum case with insulating sleeve ◆ Poles with screw terminal connections ◆ Mounting with ring clips, clamps or threaded stud Specifications Performance Characteristics Item Operating Temperature Range -40 to +105℃ Rated voltage VR 10 to 100 V DC Surge voltage VS 1.15 VR Rated capacitance CR 1800 to 1000000 µF Capacitance tolerance ±20%(120Hz,+20℃) Leakage Current Ileak (+20℃.max.) Ileak =0.018x(CxV) 0.85 + 4 or 5mA, whichever is smaller (after 5 minutes) Where, Ileak: Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Less than the value under table(%) ¢D Dissipation Factor (tanδ,at 20℃,120Hz) 10 16 25 35 40 50 63 80 100 35 51 63.5 76.2 89 75 60 40 30 30 25 20 20 15 100 70 50 50 50 30 25 20 20 120 80 70 60 60 50 30 25 25 150 120 80 70 70 60 40 30 30 180 140 130 90 90 80 60 50 30 d = 35 mm: approx. 10 nH Self-inductance ESL d = 51 mm: approx. 15 nH d ≧63.5 mm: approx. 20 nH Requirements: Useful life 105℃; VR,IAC,R >4000 h △C/C ≤±45% of initial value ESR ≤3 times initial specified limit ≤ initial specified limit Ileak Failure rate :≤1%/1000 hour Post test requirements: Voltage Endurance test 105℃; VR 2000 h DC/C ESR Ileak ≤±15% of initial value ≤1.3 times initial specified limit ≤ initial specified limit To IEC 60068-2-6, test Fc: Vibration Resistance test Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz, acceleration max. 10 g, duration 3x2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 120 Hz Characteristics at low temperature Sectional specification Z-25℃ / Z 20℃ Z-40℃ / Z 20℃ 3 12 IEC 60384-4 and JIS-C-5101 381 Screw WV RK Series Multiplier for Ripple Current vs. Frequency Rated voltage (V) Case diameter (Φ) 10 to 50 35 to 89 35 50 to 89 35 50 63.5 to 89 63 & 80 100 50 0.95 0.9 0.95 0.8 0.9 0.95 120 1 1 1 1 1 1 Frequency(Hz) 1K 1.05 1.1 1.05 1.22 1.1 1.05 10K 1.09 1.18 1.09 1.3 1.18 1.09 ≧50K 1.12 1.22 1.12 1.33 1.22 1.12 Dimensional drawings Ring clip/clamp mounting: CapXon 100000 µ F 50 V RK VENT 105 ℃ M5:Min.reach of screw = 8mm M6:Min.reach of screw = 12mm Dimensions Terminal M5 M5 M5 M5 M6 M8 d±2 35 51 63.5 76.2/89 76.2/89 100 Dimensions(mm) with insulating sleeve L±3 L1±3 d2max. 50~120 56.5~126.5 10.3 80~140 86.5~146.5 10.3 80~140 86.5~146.5 10.3 100~240 106.4~246.5 10.3 100~240 106.4~246.5 17.5 100~240 110~250 17.5 Packing a±0.5 12.7 22 28.6 31.8 31.8 41.5 Packing of screw length l(mm) ≤70mm >70mm ≤70mm >70mm ≤70mm >70mm all all all all Capacitor diameter d(mm) 35 42 51 63.5 76.2 89 100 Packing units (pcs.) 120 60 120 60 70 35 24 15 12 6 Accessories The following items are included in the delivery package, but are not fastened to the capacitors. For terminals For mounting Thread M5 M6 M12 Maximum torque 2 Nm 2.5 Nm 10 Nm 382 RK Series Case Size WV (Vdc) Cap (uF) Size (mm) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 25 25 25 25 25 25 25 25 27000 33000 39000 47000 56000 68000 68000 82000 100000 100000 120000 150000 180000 220000 270000 330000 390000 470000 560000 680000 680000 1000000 18000 22000 22000 27000 33000 33000 39000 47000 47000 56000 68000 68000 82000 100000 100000 120000 150000 180000 220000 270000 330000 390000 470000 470000 470000 560000 680000 1000000 10000 12000 15000 15000 18000 22000 22000 27000 35x50 35x50 35x60 35x80 35x80 35x100 51x80 35x100 35x120 51x80 51x80 51x100 51x120 51x120 63.5x120 63.5x120 76.2x120 76.2x120 76.2x140 89x140 89x170 89x220 35x50 35x50 35x60 35x50 35x65 35x80 35x65 35x80 35x100 35x100 35x100 51x80 51x80 51x80 51x100 51x100 51x120 51x120 63.5x120 63.5x120 76.2x120 76.2x120 76.2x140 76.2x160 89x140 89x140 89x140 89x220 35x50 35x50 35x50 35x55 35x60 35x60 35x80 35x80 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 4.9 20 37 5.1 15 30 5.9 13 26 7.1 12 21 8.0 12 18 8.5 10 18 8.5 10 20 8.9 8.0 17 10.7 7.5 16 10.7 7.5 16 11.0 7.2 14 13.2 7.0 12 15.7 6.8 11 16.8 6.5 10 19.6 6.3 9.0 20.5 6.0 8.5 21.3 5.8 8.0 22.0 5.5 7.5 23.6 5.3 7.0 26.0 5.0 6.5 27.5 5.0 6.5 30.0 4.8 6.0 4.2 24 44 4.7 21 36 4.9 21 36 5.5 18 29 5.7 16 24 6.7 16 24 6.8 14 20 7.3 13 18 8.8 13 18 9.0 12 16 9.2 12 15 9.5 12 15 10.7 10 14 11.0 9.0 13 12.5 9.0 13 13.1 8.0 12 15.5 7.0 11 15.7 6.0 10 18.0 5.5 9.5 20.0 5.3 9.0 21.3 5.0 8.8 21.5 4.8 8.5 24.2 4.5 8.3 25.5 4.5 8.3 26.5 4.5 8.3 28.1 4.2 8.0 28.5 4.0 7.8 35.0 3.8 7.5 2.9 27 53 3.7 23 44 5.3 21 35 5.5 21 35 5.5 19 29 6.5 14 24 7.4 14 24 8.0 12 20 383 WV (Vdc) Cap (uF) Size (mm) 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 33000 33000 39000 47000 47000 47000 56000 68000 68000 82000 100000 100000 100000 120000 150000 150000 180000 220000 220000 220000 270000 330000 330000 330000 330000 390000 470000 680000 6800 8200 10000 10000 12000 15000 15000 18000 22000 22000 27000 33000 33000 39000 47000 56000 68000 82000 100000 120000 150000 180000 220000 220000 220000 220000 270000 330000 330000 470000 35x80 35x100 35x100 35x105 35x120 51x80 51x80 51x80 51x100 51x100 51x105 51x120 63.5x100 63.5x100 63.5x105 63.5x120 63.5x120 76.2x105 76.2x115 76.2x120 76.2x120 76.2x145 76.2x160 89x130 89x140 89x140 89x170 89x220 35x50 35x50 35x50 35x60 35x60 35x60 35x80 35x80 35x80 35x100 35x100 35x120 51x80 51x80 51x100 51x100 51x120 63.5x100 63.5x120 63.5x120 76.2x120 76.2x120 76.2x140 76.2x160 89x130 89x140 89x140 89x160 89x170 89x220 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 8.8 10 18 9.7 10 18 10.0 9.0 17 11.0 8.0 15 11.7 8.0 15 12.0 8.0 17 12.5 7.0 14 13.0 6.0 13 14.3 6.0 13 14.6 5.5 12 15.0 5.0 10 16.0 5.0 10.0 16.3 5.0 10.0 17.0 4.7 9.0 18.0 4.5 8.0 19.0 4.5 8.0 19.5 4.3 7.0 20.0 4.0 6.0 20.8 4.0 6.0 21.2 4.0 6.0 21.7 3.7 5.0 24.0 3.7 4.5 25.0 3.7 4.5 25.0 3.7 4.5 26.0 3.7 4.5 26.5 3.5 4.4 28.0 3.3 4.3 31.0 3.0 4.2 2.6 30.0 59 3.3 25.0 49 3.6 20.0 40 3.8 20.0 40 4.8 19.0 33 5.6 17.0 27 6.0 17.0 27 6.3 15.0 22 7.6 13.0 18 7.9 13.0 18 8.2 11.0 15 10.2 9.0 13 10.7 9.0 13 11.0 7.0 12 12.5 5.0 11 13.0 4.8 10.5 14.5 4.5 10.0 14.8 4.3 9.3 17.6 4.1 9.0 18.0 4.0 8.5 20.0 3.6 8.0 20.5 3.5 7.5 23.4 3.3 7.0 25.0 3.3 7.0 24.5 3.3 7.0 25.0 3.3 7.0 25.5 3.2 6.5 30.0 3.1 6.3 31.0 3.1 6.3 34.0 3.0 6.0 RK Series WV (Vdc) Cap (uF) Size (mm) 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 10000 15000 22000 33000 47000 68000 100000 150000 220000 3300 3900 4700 5600 6800 6800 8200 10000 10000 12000 15000 18000 22000 22000 27000 33000 33000 33000 39000 47000 47000 56000 68000 68000 82000 100000 120000 150000 150000 180000 180000 220000 330000 2200 2700 3300 3900 4700 4700 5600 6800 6800 8200 10000 10000 10000 12000 15000 15000 18000 22000 35x55 35x80 35x105 51x80 51x105 51x105 63.5x105 76.2x105 76.2x143 35x50 35x50 35x50 35x50 35x50 35x80 35x60 35x60 35x80 35x80 35x80 35x100 35x120 51x80 51x80 51x100 51x115 51x120 51x120 51x120 63.5x100 63.5x100 63.5x115 63.5x120 76.2x120 76.2x120 76.2x120 89x130 89x140 89x140 89x155 89x170 89x220 35x50 35x50 35x50 35x50 35x50 35x55 35x60 35x60 35x80 35x80 35x80 35x100 35x105 35x100 35x120 51x80 51x80 51x100 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 5.3 17.0 38 7.4 12.0 23 9.5 8.5 17 11.0 6.0 12 14.0 5.0 10.0 15.0 4.5 9.0 18.0 4.1 8.2 20.0 3.6 7.2 24.0 3.3 5.0 2.2 47 100 2.8 42 85 3.3 35 71 3.5 29 59 3.7 25 49 4.5 25 49 4.5 23 40 5.5 18 33 5.8 18 33 6.0 15 28 7.6 13 22 8.0 11 18 9.8 9.0 15 10.0 9.0 18 10.2 8.0 15 11.2 7.0 13 11.5 7.0 13 12.0 7.0 13 13.2 6.5 12 14.5 6.0 11 14.5 6.0 11 14.6 5.8 9.0 16.0 5.5 8.0 16.6 5.5 8.0 18.9 5.3 7.0 19.5 5.0 7.0 20.0 4.8 6.8 22.5 4.5 6.5 23.9 4.5 6.5 24.2 4.3 6.3 25.0 4.3 6.3 26.5 4.0 6.0 32.0 3.8 5.5 2.1 65 120 2.3 46 98 2.5 42 80 2.8 37 68 3.5 30 56 4.4 30 56 4.7 26 47 5.3 22 39 6.0 22 39 6.2 18 32 7.2 14 27 7.8 14 27 8.1 14 27 8.3 12 22 8.8 9.5 19 9.5 9.5 19 10.0 9.0 17 11.0 7.0 14 384 WV (Vdc) Cap (uF) Size (mm) 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 100 100 100 100 100 100 100 100 100 100 100 100 100 100 22000 27000 33000 33000 33000 39000 47000 56000 68000 68000 68000 82000 100000 100000 100000 120000 150000 150000 220000 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 18000 22000 22000 22000 27000 33000 33000 39000 47000 47000 56000 68000 82000 100000 100000 150000 1000 1500 1800 2200 2200 2700 3300 3900 4700 4700 4700 5600 6800 6800 51x105 51x120 51x120 63.5x100 63.5x105 63.5x100 63.5x105 63.5x120 63.5x140 76.2x105 76.2x120 76.2x140 76.2x140 76.2x145 89x130 89x140 89x160 89x170 89x220 35x50 35x50 35x50 35x60 35x60 35x80 35x80 35x100 35x120 51x80 51x100 51x120 51x100 51x120 63.5x100 63.5x100 51x140 76.2x100 76.2x100 63.5x140 76.2x120 76.2x120 76.2x140 89x130 89x160 89x170 89x220 35x50 35x50 35x50 35x50 35x60 35x60 35x80 35x80 35x100 35x105 51x80 35x100 35x120 51x80 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 12.0 7.0 14 12.5 6.3 12 14.0 5.5 11 14.5 5.5 11 15.0 5.5 11 15.0 5.3 11 17.0 4.8 10 18.0 4.5 9.0 19.5 4.3 8.0 19.0 4.3 8.0 20.0 4.3 8.0 21.0 4.1 7.5 22.5 4.0 7.0 23.0 4.0 7.0 24.0 4.0 7.0 25.0 3.8 6.5 27.0 3.5 6.0 28.0 3.5 6.0 29.5 3.3 5.0 2.4 63 120 2.7 45 98 3.0 40 80 3.4 35 68 4.6 28 56 5.0 25 47 5.5 21 39 6.5 17 32 8.5 13 27 8.6 12 22 10.0 9.0 18 10.5 8.0 15 13.0 7.0 12 13.5 7.0 12 13.7 7.0 15 14.0 6.0 12 14.0 5.5 11 15.0 5.5 11 15.0 5.3 10 16.5 4.8 9.0 16.5 4.8 8.5 18.5 4.5 8.0 22.0 4.3 7.0 22.5 4.0 6.5 24.8 3.8 6.3 25.0 3.8 6.3 27.0 3.5 6.0 1.4 65.0 120 2.2 52.0 104 2.7 43.0 85 3.0 35.0 70 4.1 35.0 60 4.7 29.0 55 5.7 24.0 48 6.0 21.0 42 6.5 18.0 35 6.7 18.0 35 6.5 18.0 35 6.8 15.0 30 7.0 12.0 24 8.7 12.0 24 RK Series WV (Vdc) Cap (uF) Size (mm) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 6800 8200 10000 10000 10000 12000 15000 15000 15000 18000 22000 22000 22000 22000 51x100 51x80 51x100 51x105 51x120 51x120 63.5x100 63.5x105 63.5x120 63.5x100 63.5x120 76.2x100 76.2x105 76.2x120 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 9.5 12.0 19 10.0 9.0 32 10.5 7 14 11.0 7 14 12.5 7 14 13.0 6 12 14.5 5 10 15.0 5 10 16.0 5 10 16.0 4.8 9.5 16.5 4.5 9.0 16.5 4.5 9.0 17.0 4.5 9.0 18.0 4.5 9.0 ƒ F R life 3.0 2.5 Ia IR 2.0 1.5 0.0 40 50 60 70 Ta（℃） 80 90 4000H 12000H 25000H 50000H 100000H 250000H 1.0 0.5 Cap (uF) Size (mm) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 27000 33000 33000 33000 33000 39000 47000 47000 47000 56000 68000 68000 100000 100000 76.2x120 76.2x120 76.2x130 76.2x140 76.2x145 76.2x140 76.2x160 89x130 89x140 89x140 89x160 89x170 89x220 89x230 HP Series RS Series RK Series CapXon Useful Usefui life WV (Vdc) 100 110 2.0 1.5 40 1.0 0.5 0.0 2.5 Frequency Impedance characteristics Zon versus frequency of ESR f Typical behavior depending ambient temperature Ta versus under ripple current operating conditions 385 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 18.5 4.3 8.5 16.0 4.0 8.0 19.5 4.0 8.0 20.5 4.0 8.0 21.0 4.0 8.0 21.0 3.8 7.8 23.0 3.5 7.5 22.0 3.5 7.5 23.5 3.5 7.5 24.0 3.3 7.3 25.5 3.2 7.0 26.0 3.2 7.0 28.0 3.0 6.5 30.0 3.0 6.5 RL Series RL Series 105℃ Features Long load life Applications ◆ Professional power supplies ◆ Frequency converters ◆ Uninterruptible power supplies Features ◆ Outstanding reliability ◆ Wide temperature range ◆ Version with low-inductance design available ◆ All-welded construction ensures reliable electrical contact ◆ Self-extinguishing electrolyte ◆ RoHS-compatible Construction ◆ Charge-discharge proof, polar ◆ Aluminum case with insulating sleeve ◆ Poles with screw terminal connections ◆ Mounting with ring clips, clamps or threaded stud Specifications Performance Characteristics Item Operating Temperature Range -40 to +105℃ Rated voltage VR 160 to 450 V DC Surge voltage VS -25 to +85℃ 500 V DC VR 315V 1.10 VR 220 to 22000 µF Rated capacitance CR 680 to 8200 µF Capacitance tolerance ±20%(120Hz,+20℃) Leakage Current Ileak (+20℃.max.) Ileak =0.018x(CxV) 0.85 + 4 or 5mA, whichever is smaller (after 5 minutes) Where, Ileak: Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Screw Dissipation Factor (tanδ,at 20℃,120Hz) Less than the value under table(%) Working Voltage(VDC) D.F. (%)max. 160~450 500~550 15 20 d = 51 mm: approx. 17 nH Self-inductance ESL d ≧63.5 mm: approx. 20 nH Capacitors with low-inductance design: d ≧63.5 mm: approx. 15 nH Requirements: Useful life 105℃; VR,IAC,R >10000 h △C/C tanδ Ileak ≤±15% of initial value ≤1.75 times initial specified limit ≤ initial specified limit Post test requirements: Voltage Endurance test 105℃; VR 5000 h △C/C tanδ Ileak ≤±10% of initial value ≤1.3 times initial specified limit ≤ initial specified limit To IEC 60068-2-6, test Fc: Vibration Resistance test Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz, acceleration max. 10 g, duration 3x2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 120 Hz VR(V) Z-25℃ / Z 20℃ Z-40℃ / Z 20℃ Characteristics at low temperature Sectional specification 160-450 4 10 ≧500 4 - IEC 60384-4 and JIS-C-5101 Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier 50 0.8 120 1 300 1.2 1K 1.3 ≧3K 1.4 386 RL Series Dimensional drawings Ring clip/clamp mounting: CapXon 4700 µ F 450 V RL VENT 105 ℃ M5:Min.reach of screw = 8mm M6:Min.reach of screw = 12mm M8:Min.reach of screw = 16mm Dimensions Terminal M5 M5 M5 M5 M6 M8 d±2 35 51 63.5 76.2/89 76.2/89 100 Dimensions(mm) with insulating sleeve L±3 L1±3 d2max. 50~120 56.5~126.5 10.3 80~140 86.5~146.5 10.3 80~140 86.5~146.5 10.3 100~240 106.4~246.5 10.3 100~240 106.4~246.5 17.5 100~240 110~250 17.5 Packing a±0.5 12.7 22 28.6 31.8 31.8 41.5 Packing of screw length l(mm) ≤70mm >70mm ≤70mm >70mm ≤70mm >70mm all all all all Capacitor diameter d(mm) 35 42 51 63.5 76.2 89 100 Packing units (pcs.) 120 60 120 60 70 35 24 15 12 6 Accessories The following items are included in the delivery package, but are not fastened to the capacitors. For terminals For mounting Thread M5 M6 M8 M12 Maximum torque 2 Nm 2.5 Nm 5.0 Nm 10 Nm 387 RL Series Case Size WV (Vdc) Cap (uF) Size (mm) 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 330 470 680 820 1000 1000 1200 35x50 35x80 35x80 35x80 35x80 35x100 35x120 35x120 51x100 51x120 51x120 51x120 63.5x120 76.2x100 76.2x120 76.2x140 89x140 35x50 35x80 35x80 35x80 35x100 35x120 35x120 51x80 51x100 51x120 51x120 63.5x100 63.5x120 76.2x100 76.2x120 76.2x140 89x140 35x50 35x80 35x80 35x80 35x100 35x100 35x120 51x80 51x100 51x120 51x120 63.5x100 63.5x120 76.2x100 76.2x120 76.2x140 89x140 35x80 35x80 51x60 51x60 51x75 51x80 51x75 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 1.6 150 290 2.2 120 240 2.5 100 200 2.7 87 170 2.9 67 130 3.6 56 110 4.2 46 90 4.6 38 74 5.8 31 60 6.8 26 51 7.5 22 42 8.3 18 36 10.2 15 29 11.5 12 24 13.0 10 20 14.5 9 17 17.3 7 13 1.3 220 420 1.7 180 360 1.9 150 290 2.1 120 240 2.6 100 200 3.1 87 170 3.5 67 130 3.8 56 110 4.7 46 90 5.7 38 74 6.2 31 60 7.1 26 51 8.3 22 42 9.4 18 36 11.0 15 29 13.0 12 24 15.8 10 20 1.1 310 600 1.5 260 510 1.6 220 420 1.8 180 360 2.1 150 290 2.3 120 240 2.8 100 200 3.2 87 170 3.9 67 130 4.6 56 110 5.1 46 90 6.0 38 74 7.0 31 60 7.9 26 51 9.2 22 42 10.7 18 36 12.9 15 29 2.2 310 600 2.9 220 420 3.7 150 290 3.8 120 240 6.4 100 200 6.6 100 200 6.6 87 170 388 WV (Vdc) Cap (uF) Size (mm) 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 400 400 400 400 1200 1500 1500 1800 1800 2200 2200 2700 2700 2700 2700 3300 3300 3300 3900 3900 3900 4700 4700 5600 5600 5600 5600 6800 6800 6800 6800 8200 8200 8200 8200 8200 10000 10000 10000 10000 12000 12000 12000 12000 15000 15000 15000 18000 18000 22000 22000 22000 220 330 470 680 680 1000 1000 1200 1200 1500 51x80 51x80 51x96 51x96 51x120 51x98 51x120 51x98 51x125 63.5x85 63.5x100 51x118 51x145 63.5x100 63.5x100 63.5x130 76.2x100 63.5x115 76.2x110 63.5x135 63.5x170 76.2x125 89x105 63.5x189 76.2x125 76.2x150 89x119 63.5x244 76.2x136 76.2x170 89x120 89x150 76.2x190 76.2x220 89x136 89x170 76.2x240 89x136 89x190 100x190 89x176 89x220 100x250 89x186 89x240 89x230 89x270 100x250 35x80 35x80 35x100 51x60 51x80 51x75 51x80 51x80 51x96 51x96 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 6.7 87 170 8.0 67 130 8.7 67 130 8.8 56 110 9.7 56 110 10.1 46 90 11.0 46 90 10.5 38 74 11.7 38 74 11.9 38 74 12.8 38 74 11.5 31 60 12.6 31 60 13.8 31 60 15.1 26 51 16.9 26 51 16.7 26 51 17.9 22 42 19.4 22 42 20.5 18 36 22.8 18 36 22.2 18 36 24.1 18 36 26.4 15 29 24.3 15 29 26.3 15 29 27.3 15 29 32.5 12 24 27.5 12 24 30.4 12 24 28.5 12 24 31.4 12 24 31.6 10 20 33.8 10 20 29.7 10 20 32.7 10 20 35.3 9 17 29.8 9 17 34.3 9 17 36.8 9 17 39.0 7 13 43.0 7 13 48.7 7 13 40.0 6 11 44.9 6 11 45.2 5 9 48.7 5 9 50.0 5 9 1.7 460 900 2.4 310 600 3.2 220 420 3.8 150 290 4.3 150 290 6.5 100 200 6.7 100 200 7.0 87 170 7.7 87 170 8.8 67 130 RL Series WV (Vdc) Cap (uF) Size (mm) 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 1500 1800 1800 1800 2200 2200 2200 2200 2700 2700 2700 3300 3300 3300 3300 3900 3900 3900 3900 3900 4700 4700 4700 4700 5600 5600 5600 5600 5600 6800 6800 6800 6800 6800 6800 6800 6800 8200 8200 8200 8200 8200 8200 10000 10000 10000 10000 12000 12000 12000 12000 15000 15000 15000 18000 18000 220 330 470 560 51x115 51x105 51x140 63.5x85 51x105 51x125 63.5x85 63.5x100 51x145 63.5x90 63.5x115 63.5x95 63.5x130 76.2x75 76.2x100 63.5x100 63.5x150 76.2x85 76.2x110 76.2x130 63.5x120 63.5x170 76.2x95 76.2x130 63.5x135 63.5x190 76.2x105 76.2x150 89x105 63.5x250 76.2x125 76.2x170 89x105 89x125 89x140 89x150 89x155 76.2x170 76.2x210 89x115 89x125 89x160 89x170 76.2x220 89x135 89x190 100x190 89x165 89x190 89x220 100x220 89x195 89x240 100x220 89x235 89x270 35x80 35x100 51x60 51x60 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 9.5 67 130 9.6 56 110 10.8 56 110 9.9 56 110 10.5 46 90 11.3 46 90 10.8 46 90 11.6 46 90 13.6 38 74 12.4 38 74 13.7 38 74 14.5 31 60 16.7 31 60 14.7 31 60 16.5 31 60 15.8 26 51 18.9 26 51 15.3 26 51 18.3 26 51 19.7 26 51 18.6 22 42 21.7 22 42 18.6 22 42 21.2 22 42 22.1 18 36 25.8 18 36 21.9 18 36 25.6 18 36 24.3 18 36 31.2 15 29 25.2 15 29 28.9 15 29 25.9 15 29 27.9 15 29 29.3 15 29 31.0 15 29 31.4 15 29 30.6 12 24 33.7 12 24 28.2 12 24 29.2 12 24 32.5 12 24 33.4 12 24 36.4 10 20 31.9 10 20 37.1 10 20 39.6 10 20 36.8 9 17 39.1 9 17 41.8 9 17 44.6 9 17 39.6 7 13 43.5 7 13 44.6 7 13 44.0 6 11 46.9 6 11 1.9 460 900 2.5 310 600 3.0 220 420 3.3 180 360 389 WV (Vdc) Cap (uF) Size (mm) 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 500 500 500 500 680 1000 1000 1200 1200 1500 1500 1800 1800 2200 2200 2700 2700 2700 2700 2700 3300 3300 3300 3300 3900 3900 3900 3900 3900 4700 4700 4700 4700 4700 5600 5600 5600 5600 5600 5600 5600 6800 6800 6800 6800 6800 6800 8200 8200 8200 8200 10000 10000 10000 10000 12000 12000 12000 15000 15000 680 1000 1200 1200 51x85 51x85 51x105 51x85 51x115 51x100 51x115 51x100 63.5x85 51x120 63.5x100 51x143 63.5x100 63.5x130 76.2x85 76.2x115 63.5x115 63.5x150 76.2x95 76.2x130 63.5x135 63.5x170 76.2x105 76.2x130 89x105 63.5x165 76.2x115 76.2x130 76.2x150 89x105 63.5x244 76.2x135 76.2x150 76.2x190 89x105 89x125 89x150 76.2x170 76.2x190 76.2x220 89x115 89x125 89x170 76.2x195 76.2x240 89x145 89x190 89x165 89x190 89x220 100x220 89x195 89x230 100x250 89x235 89x250 51x75 51x90 51x115 63.5x80 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 4.5 150 290 6.9 100 200 7.6 100 200 7.4 87 170 8.5 87 170 9.1 67 130 9.6 67 130 9.5 56 110 10.0 56 110 11.5 46 90 12.0 46 90 13.8 38 74 13.2 38 74 14.8 38 74 13.7 38 74 15.6 38 74 14.7 31 60 16.6 31 60 16.2 31 60 18.5 31 60 18.0 26 51 20.0 26 51 17.9 26 51 19.8 26 51 19.6 26 51 21.6 22 42 20.4 22 42 21.5 22 42 22.9 22 42 21.5 22 42 29.4 18 36 22.5 18 36 25.9 18 36 28.8 18 36 24.8 18 36 26.1 18 36 28.9 18 36 29.0 15 29 30.5 15 29 32.6 15 29 26.7 15 29 27.7 15 29 31.6 15 29 33.6 12 24 37.0 12 24 32.1 12 24 36.2 12 24 34.9 10 20 37.2 10 20 39.7 10 20 42.3 10 20 39.4 9 17 42.5 9 17 47.0 9 17 44.4 7 13 45.7 7 13 4.1 200 390 5.1 140 270 5.9 110 220 5.7 110 220 RL Series WV (Vdc) Cap (uF) Size (mm) 500 500 500 500 500 500 500 500 500 1500 1500 1800 1800 2200 2200 2700 2700 3300 51x135 63.5x90 63.5x100 76.2x70 63.5x120 76.2x95 63.5x135 76.2x105 63.5x165 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 7.1 92 180 6.7 92 180 7.8 77 150 7.5 77 150 8.6 62 120 8.6 62 120 9.8 50 98 9.7 50 98 11.0 41 80 CapXon Useful life 2.5 2.0 Ia 1.5 IR 50 60 70 Ta（℃） 80 10000H 250000H 50000H 100000H 250000H 0.5 175000H 1.0 40 Cap (uF) Size (mm) 500 500 500 500 500 500 500 500 3300 3900 3900 4700 4700 5600 6800 8200 76.2x130 76.2x145 89x105 76.2x165 89x125 89x145 89x165 89x205 RL Series Useful life 0.0 WV (Vdc) 90 100 110 depending on ambient temperature Ta versus under ripple current operating conditions 390 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 11.0 41 80 13.1 35 68 12.5 35 68 14.5 29 56 14.0 29 56 15.9 24 47 18.6 20 39 20.3 17 32 RM Series RM Series 105℃ Features Long useful life Applications ◆ Frequency converters ◆ Professional power supplies ◆ Hybrid electric vehicles(HEV) ◆ Traction Features ◆ High reliability ◆ long useful life ◆ Extremely high ripple current capability ◆ Wide temperature range ◆ All-welded construction ensures reliable electrical contact ◆ low-inductance design ◆ Self-extinguishing electrolyte ◆ RoHS-compatible Construction ◆ Charge-discharge proof, polar ◆ Aluminum case with insulating sleeve ◆ Poles with screw terminal connections ◆ Mounting with ring clips, clamps or threaded stud Specifications Performance Characteristics Item Operating Temperature Range -40 to +105℃(160Vdc~450Vdc) -25 to +105℃(500Vdc) 160 to 500 V DC Rated voltage VR VR 315V 1.10 VR 180 to 68000 µF Rated capacitance CR ±20%(120Hz,+20℃) Leakage Current Ileak (+20℃.max.) Ileak =0.018x(CxV) 0.85 + 4 or 5mA, whichever is smaller (after 5 minutes) Where, Ileak: Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Dissipation Factor (tanδ,at 20℃,120Hz) Less than the value under table(%) Working Voltage(VDC) D.F. (%)max. 160~450 500~550 15 20 d = 51 mm: approx. 16 nH Self-inductance ESL d ≧63.5 mm: approx. 18 nH Capacitors with low-inductance design: d ≧63.5 mm: approx. 14 nH Requirements: Useful life 105℃; VR,IAC,R >6000 h △C/C tanδ Ileak ≤±15% of initial value ≤1.75 times initial specified limit ≤ initial specified limit Post test requirements: Voltage Endurance test 105℃; VR 2000 h △C/C tanδ Ileak ≤±10% of initial value ≤1.3 times initial specified limit ≤ initial specified limit To IEC 60068-2-6, test Fc: Vibration Resistance test Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz, acceleration max. 10 g, duration 3x2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 120 Hz VR(V) Z-25℃ / Z 20℃ Z-40℃ / Z 20℃ Characteristics at low temperature Sectional specification 160-450 4 10 ≧500 4 - IEC 60384-4 and JIS-C-5101 Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier 50 0.8 120 1 300 1.2 1K 1.3 ≧3K 1.4 391 Screw Capacitance tolerance RM Series Dimensional drawings Ring clip/clamp mounting: CapXon 4700 µ F 450 V RM VENT 105 ℃ M5:Min.reach of screw = 8mm M6:Min.reach of screw = 12mm M8:Min.reach of screw = 16mm Dimensions Terminal M5 M5 M5 M5 M6 M8 d±2 35 51 63.5 76.2/89 76.2/89 100 Dimensions(mm) with insulating sleeve L±3 L1±3 d2max. 50~120 56.5~126.5 10.3 80~140 86.5~146.5 10.3 80~140 86.5~146.5 10.3 100~240 106.4~246.5 10.3 100~240 106.4~246.5 17.5 100~240 110~250 17.5 Packing a±0.5 12.7 22 28.6 31.8 31.8 41.5 Packing of screw length l(mm) ≤70mm >70mm ≤70mm >70mm ≤70mm >70mm all all all all Capacitor diameter d(mm) 35 42 51 63.5 76.2 89 100 Packing units (pcs.) 120 60 120 60 70 35 24 15 12 6 Accessories The following items are included in the delivery package, but are not fastened to the capacitors. For terminals For mounting Thread M5 M6 M8 M12 Maximum torque 2 Nm 2.5 Nm 5.0 Nm 10 Nm 392 RM Series Case Size WV (Vdc) Cap (uF) Size (mm) 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 6800 8200 10000 10000 12000 15000 18000 22000 22000 27000 33000 47000 68000 330 390 470 560 680 820 1000 1200 1500 1800 2200 2200 2700 2700 3300 3900 4700 4700 5600 6800 8200 10000 12000 15000 15000 18000 22000 22000 33000 47000 35x50 35x50 35x50 35x50 35x50 35x60 35x60 35x80 35x80 35x100 51x75 51x75 51x96 51x96 51x120 63.5x96 63.5x96 63.5x120 76.2x96 76.2x100 76.2x120 76.2x140 76.2x140 89x130 89x140 89x140 89x220 100x250 35x50 35x50 35x50 35x50 35x50 35x50 35x60 35x60 35x80 35x80 35x100 51x75 35x120 51x96 51x80 51x100 51x140 63.5x96 63.5x96 63.5x115 63.5x120 76.2x115 76.2x120 76.2x140 89x130 89x140 76.2x160 89x140 89x220 89x250 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 1.1 230 420 1.3 200 360 1.4 160 290 1.5 130 240 1.6 110 200 2.0 94 170 2.2 72 130 2.6 61 110 2.9 50 90 3.4 41 74 3.9 33 60 4.0 28 51 4.7 24 42 5.2 20 36 6.2 16 29 6.2 16 29 7.1 13 24 8.5 11 20 8.5 11 20 9.5 9.2 17 11.5 7.4 13 13.5 6.1 11 14.0 5.0 9.0 14.8 5.0 9.0 16.1 4.1 7.5 16.6 3.3 7.0 17.5 3.0 6.5 19.3 2 6.0 1.0 330 600 1.1 280 510 1.2 230 420 1.4 200 360 1.5 160 290 1.6 130 240 1.8 110 200 2.1 94 170 2.3 72 130 2.7 61 110 3.1 50 90 3.2 50 90 3.7 41 74 3.7 41 74 4.2 33 60 5.0 28 51 5.8 24 42 5.4 24 42 5.9 20 36 7.0 16 29 7.7 13 24 9.7 11 20 10.3 9 17 11.6 7 13 12.3 7 13 13.6 6 11 14.0 5.0 9 15.2 5.0 9 16.6 3.5 6 19.9 3.0 5 393 WV (Vdc) Cap (uF) Size (mm) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 350 350 350 350 350 350 350 270 330 390 470 560 680 820 1000 1200 1500 1500 1800 1800 2200 2700 3300 3300 3900 3900 4700 5600 6800 8200 10000 10000 12000 15000 22000 33000 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 180 220 270 330 390 470 560 35x50 35x50 35x50 35x50 35x50 35x60 35x80 35x80 35x80 35x100 51x75 35x120 51x75 51x96 51x100 51x120 63.5x96 51x120 63.5x96 63.5x115 63.5x120 76.2x115 76.2x120 76.2x140 89x140 89x140 89x157 89x220 100x250 35x50 35x50 35x50 35x50 35x50 35x60 35x55 35x65 35x75 35x80 35x100 51x70 51x75 51x90 51x100 63.5x85 63.5x96 76.2x85 76.2x96 76.2x110 89x100 89x115 35x50 35x50 35x50 35x50 35x60 35x55 35x60 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 0.9 410 740 1.1 330 600 1.2 280 510 1.3 230 420 1.5 200 360 1.6 160 290 1.7 130 240 1.9 110 200 2.2 94 170 2.4 72 130 2.5 72 130 2.8 61 110 2.8 61 110 3.3 50 90 3.8 41 74 4.3 33 60 4.3 33 60 5.1 28 51 4.7 28 51 5.8 24 42 6.4 20 36 7.8 16 29 8.5 13 24 10.1 11 20 10.3 11 20 12.0 9 17 12.6 7 13 15.5 5.0 9 17.1 3.3 6 0.8 620 1110 1.0 500 900 1.1 410 740 1.2 330 600 1.3 280 510 1.5 230 420 2.5 200 360 3.0 160 290 3.4 130 240 3.9 110 200 4.6 94 170 5.5 72 130 6.1 61 110 7.3 50 90 8.5 41 74 10.0 33 60 11.4 28 51 13.2 24 42 15.1 20 36 17.7 16 29 17.8 13 24 20.2 11 20 0.9 620 1110 1.1 500 900 1.2 410 740 1.3 330 600 1.4 280 510 2.3 230 420 2.6 200 360 RM Series WV (Vdc) Cap (uF) Size (mm) 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 680 820 1000 1000 1200 1500 1800 2200 2700 2700 3300 3300 3900 3900 4700 4700 5600 5600 6800 6800 8200 8200 10000 10000 12000 12000 15000 15000 18000 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2200 2700 2700 3300 3300 3900 3900 4700 4700 4700 5600 5600 5600 6800 6800 8200 8200 35x70 35x80 35x90 51x75 51x65 51x75 51x85 51x100 51x105 63.5x80 51x130 63.5x96 63.5x105 76.2x80 63.5x130 76.2x96 63.5x130 76.2x105 76.2x125 89x120 76.2x143 89x115 76.2x160 89x140 76.2x190 89x145 76.2x220 89x170 89x200 35x50 35x50 35x50 35x60 35x55 35x60 35x70 51x80 35x90 51x65 51x75 51x80 51x96 51x115 63.5x85 51x130 63.5x96 63.5x105 76.2x105 63.5x118 76.2x105 63.5x143 76.2x105 89x97 63.5x195 76.2x130 89x96 76.2x143 89x115 76.2x170 89x130 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 3.1 160 290 3.5 130 240 4.1 110 200 4.3 110 200 4.7 94 170 5.6 72 130 6.5 61 110 7.7 50 90 8.7 41 74 8.8 41 74 10.1 33 60 10.1 33 60 11.2 28 51 11.8 28 51 12.7 24 42 13.3 24 42 14.2 20 36 15.7 20 36 18.7 16 29 18.8 16 29 19.0 13 24 18.9 13 24 19.5 11 20 21.0 11 20 24.8 9 17 25.7 9 17 29.1 7 13 29.6 7 13 33.2 6 11 1.0 620 1110 1.2 500 900 1.3 410 740 1.5 330 600 2.1 280 510 2.4 230 420 2.8 200 360 3.7 160 290 3.7 130 240 4.4 110 200 5.0 94 170 5.8 72 130 7.0 61 110 8.1 50 90 8.2 50 90 9.4 41 74 9.3 41 74 10.8 33 60 11.3 33 60 11.8 28 51 12.3 28 51 13.5 24 42 14.4 24 42 14.9 24 42 17.2 20 36 15.8 20 36 15.3 20 36 19.0 16 29 18.9 16 29 20.6 13 24 19.3 13 24 394 WV (Vdc) Cap (uF) Size (mm) 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 10000 10000 12000 12000 15000 220 330 390 470 560 680 680 820 1000 1200 1500 1500 1500 1800 1800 2200 2700 2700 3300 3300 3300 3900 3900 4700 4700 5600 5600 6800 6800 8200 8200 10000 330 470 680 820 1000 1200 1200 1500 1500 1800 2200 2200 2700 2700 2700 3300 3300 3300 3900 3900 4700 4700 5600 76.2x190 89x160 76.2x220 89x180 89x200 35x50 35x55 35x65 35x75 35x80 35x100 51x80 35x110 51x80 51x90 51x90 51x105 63.5x80 51x130 63.5x96 63.5x96 63.5x118 76.2x96 63.5x145 76.2x120 89x97 76.2x130 89x120 76.2x120 89x120 76.2x160 89x120 76.2x160 89x140 76.2x220 89x170 89x200 51x80 51x60 51x80 51x85 51x105 51x120 63.5x85 51x130 63.5x96 63.5x105 63.5x130 76.2x96 63.5x145 76.2x105 89x97 63.5x170 76.2x130 89x120 76.2x145 89x120 76.2x170 89x145 76.2x220 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 21.8 11 20 22.0 11 20 27.0 9 17 26.0 9 17 29.7 7 13 1.2 500 900 1.9 330 600 2.3 280 510 2.6 230 420 2.9 200 360 3.6 160 290 3.8 160 290 4.2 130 240 4.7 110 200 5.4 94 170 5.9 72 130 6.8 72 130 7.0 72 130 7.8 61 110 7.8 61 110 8.6 50 90 10.2 41 74 10.7 41 74 11.5 33 60 11.0 33 60 13.1 33 60 13.4 28 51 14.9 28 51 14.5 24 42 16.7 24 42 15.9 20 36 15.4 20 36 19.1 16 29 19.2 16 29 23.1 13 24 23.7 13 24 24.0 11 20 2.8 440 800 2.7 310 560 4.1 220 390 4.3 180 320 4.8 150 270 6.0 120 220 5.8 120 220 7.0 100 180 7.1 100 180 7.9 83 150 9.4 67 120 9.5 67 120 10.3 55 98 10.8 55 98 11.6 55 98 13.0 45 80 12.2 45 80 13.4 45 80 13.5 38 68 15.0 38 68 16.0 31 56 16.8 31 56 18.1 26 47 RM Series WV (Vdc) Cap (uF) Size (mm) 500 500 500 500 5600 6800 8200 10000 89x150 89x170 89x220 89x250 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/85℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 17.9 26 47 20.8 22 39 25.6 18 32 30.0 15 27 CapXon RM Series Useful life Useful life 3.0 2.5   2.0 a R 1.5 0.0 40 50 60 70 Ta（℃） 80 90 100 6000H 10000H 20000H 50000H 0.5 100000H 250000H 1.0 110 depending on ambient temperature Ta versus under ripple current operating conditions 395 RH Series RH Series 105℃ Features Standard capacitors Applications ◆ Frequency converters ◆ Uninterruptible power supplies ◆ Uninterruptible power supplies Features ◆ Outstanding reliability ◆ Wide temperature range ◆ Extra long useful life ◆ Version with low-inductance design available ◆ All-welded construction ensures reliable electrical contact ◆ Self-extinguishing electrolyte ◆ RoHS-compatible Construction ◆ Charge-discharge proof, polar ◆ Aluminum case with insulating sleeve ◆ Poles with screw terminal connections ◆ Mounting with ring clips, clamps or threaded stud Specifications Performance Characteristics Item Operating Temperature Range -40 to +105℃ Rated voltage VR 160 to 450 V DC VR 315V 1.10 VR 220 to 47000 µF Rated capacitance CR Capacitance tolerance ±20%(120Hz,+20℃) Leakage Current Ileak (+20℃.max.) Ileak =0.018x(CxV) 0.85 + 4 or 5mA, whichever is smaller (after 5 minutes) Where, Ileak: Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Screw Dissipation Factor (tanδ,at 20℃,120Hz) Less than the value under table(%) Working Voltage(VDC) D.F. (%)max. 160~450 500~550 15 20 d = 51 mm: approx. 17 nH Self-inductance ESL d ≧63.5 mm: approx. 20 nH Capacitors with low-inductance design: d ≧63.5 mm: approx. 15 nH Requirements: Useful life 105℃; VR,IAC,R >8000 h △C/C tanδ Ileak ≤±15% of initial value ≤1.75 times initial specified limit ≤ initial specified limit Post test requirements: Voltage Endurance test 105℃; VR 2000 h △C/C tanδ Ileak ≤±10% of initial value ≤1.3 times initial specified limit ≤ initial specified limit To IEC 60068-2-6, test Fc: Vibration Resistance test Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz, acceleration max. 10 g, duration 3x2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 120 Hz VR(V) Z-25℃ / Z 20℃ Z-40℃ / Z 20℃ Characteristics at low temperature Sectional specification 160-450 4 10 ≧500 4 - IEC 60384-4 and JIS-C-5101 Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier 50 0.8 120 1 300 1.2 1K 1.3 ≧3K 1.4 396 RH Series Dimensional drawings Ring clip/clamp mounting: CapXon 4700 µ F 450 V RH VENT 105 ℃ M5:Min.reach of screw = 8mm M6:Min.reach of screw = 12mm M8:Min.reach of screw = 16mm Dimensions Terminal M5 M5 M5 M5 M6 M8 d±2 35 51 63.5 76.2/89 76.2/89 100 Dimensions(mm) with insulating sleeve L±3 L1±3 d2max. 50~120 56.5~126.5 10.3 80~140 86.5~146.5 10.3 80~140 86.5~146.5 10.3 100~240 106.4~246.5 10.3 100~240 106.4~246.5 17.5 100~240 110~250 17.5 Packing a±0.5 12.7 22 28.6 31.8 31.8 41.5 Packing of screw length l(mm) ≤70mm >70mm ≤70mm >70mm ≤70mm >70mm all all all all Capacitor diameter d(mm) 35 42 51 63.5 76.2 89 100 Packing units (pcs.) 120 60 120 60 70 35 24 15 12 6 Accessories The following items are included in the delivery package, but are not fastened to the capacitors. For terminals For mounting Thread M5 M6 M8 M12 Maximum torque 2 Nm 2.5 Nm 5.0 Nm 10 Nm 397 RH Series Case Size WV (Vdc) Cap (uF) Size (mm) 160 160 160 160 160 160 160 160 160 160 160 160 160 160 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 1000 1500 2200 3300 3300 4700 6800 6800 10000 15000 22000 22000 33000 47000 680 1000 1500 2200 2200 3300 3300 4700 4700 6800 10000 15000 15000 22000 22000 470 680 1000 1500 2200 3300 3300 4700 6800 10000 10000 15000 22000 330 470 680 1000 1000 1500 1500 2200 2200 2200 2700 3300 3300 3900 4700 4700 35x60 35x80 35x100 35x120 51x80 51x100 51x140 63.5x100 63.5x120 76.2x120 76.2x140 89x130 89x140 89x220 35x50 35x60 35x80 35x120 51x80 51x80 51x100 51x140 63.5x100 63.5x120 76.2x120 76.2x140 76.2x160 76.2x160 89x140 35x60 35x80 35x100 51x80 51x100 51x140 63.5x100 63.5x120 76.2x120 76.2x160 89x140 89x170 89x220 35x60 35x80 35x100 35x120 51x80 51x80 51x100 51x105 51x120 51x140 63.5x80 63.5x100 63.5x120 63.5x120 63.5x145 76.2x105 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/105℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 1.9 110 200 2.5 68 130 3.3 48 90 4.5 32 60 4.5 32 60 5.5 22 42 7.8 15 29 7.5 15 29 8.8 10 20 10.8 7 13 13.8 5 9 14.5 5 9 15.5 3 6 19.2 3 5 1.4 150 290 2.0 110 200 2.5 68 130 3.6 48 90 3.6 48 90 4.6 32 60 4.8 32 60 6.4 22 42 6.2 22 42 7.7 15 29 10.0 10 20 11.5 7 13 12.2 7 13 15.5 5 9 16.5 5 9 1.2 220 420 1.7 150 290 2.5 110 200 2.9 68 130 4.0 48 90 5.3 32 60 5.0 32 60 6.6 22 42 8.3 15 29 11.0 10 20 11.5 10 20 14.5 7 13 17.0 5 9 1.6 320 600 2.3 220 420 3.3 150 290 4.4 110 200 4.6 110 200 5.7 68 130 6.8 68 130 7.7 48 90 8.3 48 90 8.8 48 90 8.7 39 74 10.0 32 60 10.8 32 60 11.5 27 51 12.6 22 42 12.6 22 42 398 WV (Vdc) Cap (uF) Size (mm) 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 4700 5600 6800 8200 8200 10000 10000 10000 12000 12000 15000 18000 220 330 470 680 680 1000 1500 1500 2200 2200 2700 3300 3300 3300 3900 4700 4700 5600 6800 6800 8200 10000 12000 15000 220 330 470 680 680 1000 1000 1500 2200 2200 2700 3300 3300 3900 4700 4700 5600 5600 5600 6800 6800 6800 76.2x120 76.2x130 76.2x140 76.2x160 89x145 76.2x160 76.2x190 89x140 76.2x220 89x170 89x190 89x220 35x50 35x60 35x80 35x120 51x80 51x80 51x105 51x120 51x130 63.5x100 63.5x100 63.5x130 76.2x105 76.2x120 76.2x120 76.2x120 76.2x130 76.2x145 76.2x160 89x145 89x160 89x160 89x180 89x200 35x50 35x60 35x80 35x120 51x80 51x80 51x105 51x120 63.5x100 63.5x120 63.5x130 63.5x145 76.2x120 76.2x145 76.2x120 76.2x160 76.2x130 76.2x160 89x145 76.2x160 76.2x220 89x170 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/105℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 13.0 22 42 14.8 19 36 16.5 15 29 20.0 13 24 21.5 13 24 21.5 10 20 23.0 10 20 23.0 10 20 27.5 9 17 28.5 9 17 30.0 7 13 34.0 6 11 1.4 470 900 1.7 320 600 3.3 220 420 3.9 150 290 4.1 150 290 4.7 110 200 6.4 68 130 7.0 68 130 9.1 48 90 8.3 48 90 10.0 39 74 11.5 32 60 11.7 32 60 12.2 32 60 13.0 27 51 14.5 22 42 15.0 22 42 17.0 19 36 19.3 15 29 20.0 15 29 22.0 13 24 24.0 10 20 28.0 9 17 31.0 7 13 1.4 470 900 1.7 320 600 3.5 220 420 4.2 150 290 5.5 150 290 5.8 110 200 6.5 110 200 7.1 68 130 8.4 48 90 9.2 48 90 11.3 39 74 13.2 32 60 12.7 32 60 15.0 27 51 15.0 22 42 17.0 22 42 16.0 19 36 17.8 19 36 20.0 19 36 20.0 15 29 22.0 15 29 23.0 15 29 RH Series WV (Vdc) Cap (uF) Size (mm) 450 450 450 8200 10000 12000 89x180 89x200 89x236 Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/105℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 24.0 13 24 27.0 10 20 29.0 9 17 CapXon RH Series Useful life Useful life 3.0 2.5 Ia IR 2.0 1.5 40 50 60 70 Ta（℃） 80 90 8000H 10000H 20000H 50000H 250000H 0.5 0.0 100000H 1.0 100 110 depending on ambient temperature Ta versus under ripple current operating conditions 399 RQ Series RQ Series 85℃ Features Extremely Long useful life Applications ◆ Frequency converters ◆ Professional power supplies ◆ Hybrid electric vehicles(HEV) ◆ Traction Features ◆ Long useful life ◆ High reliability ◆ Extremely high ripple current capability ◆ Wide temperature range ◆ All-welded construction ensures reliable electrical contact ◆ Low-inductance design ◆ Self-extinguishing electrolyte ◆ RoHS-compatible Construction ◆ Charge-discharge proof, polar ◆ Aluminum case with insulating sleeve ◆ Poles with screw terminal connections ◆ Mounting with ring clips, clamps or threaded stud Specifications Item Performance Characteristics Operating Temperature Range -40 to +105℃(160Vdc~450Vdc) 160 to 450 V DC Rated voltage VR VR 315V 1.10 VR 2200 to 47000 µF Rated capacitance CR Screw Capacitance tolerance ±20%(120Hz,+20℃) Leakage Current Ileak (+20℃.max.) Ileak =0.018x(CxV) 0.85 + 4 or 5mA, whichever is smaller (after 5 minutes) Where, Ileak: Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Dissipation Factor (tanδ,at 20℃,120Hz) Less than the value under table(%) Working Voltage(VDC) D.F. (%)max. 160~450 15 d = 51 mm: approx. 17 nH Self-inductance ESL d ≧63.5 mm: approx. 20 nH Capacitors with low-inductance design: d ≧63.5 mm: approx. 15 nH Requirements: Useful life 105℃; VR,IAC,R >6000 h △C/C tanδ Ileak ≤±15% of initial value ≤1.75 times initial specified limit ≤ initial specified limit Post test requirements: Voltage Endurance test 105℃; VR 2000 h △C/C tanδ Ileak ≤±10% of initial value ≤1.3 times initial specified limit ≤ initial specified limit To IEC 60068-2-6, test Fc: Vibration Resistance test Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz, acceleration max. 10 g, duration 3x2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 120 Hz VR(V) Z-25℃ / Z 20℃ Z-40℃ / Z 20℃ Characteristics at low temperature Sectional specification 160-450 4 10 ≧500 4 - IEC 60384-4 and JIS-C-5101 Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier 50 0.8 120 1 300 1.2 1K 1.3 ≧3K 1.4 400 RQ Series Dimensional drawings Threaded stud mounting CapXon 4700 µ F 450 V RQ VENT 105 ℃ M5:Min.reach of screw = 8mm M6:Min.reach of screw = 12mm M8:Min.reach of screw = 16mm Dimensions Terminal M5 M5/M6 M5/M6 M8 d±2 63.5 76.2/89 76.2/89 100 L±3 80~140 100~240 100~240 100~240 Dimensions(mm) with insulating sleeve L1±3 L2+/-1 d1 86.5~146.5 16 M12 106.4~246.5 16 M12 106.4~246.5 16 M12 110~250 16 M12 Packing d2max. 10.3 10.3 17.5 17.5 a±0.5 28.6 31.8 31.8 41.5 Packing of screw length l(mm) all all all all Capacitor diameter d(mm) 63.5 76.2 89 100 Packing units (pcs.) 24 15 12 6 Accessories The following items are included in the delivery package, but are not fastened to the capacitors. For terminals For mounting Thread M5 M6 M8 M12 Maximum torque 2 Nm 2.5 Nm 5.0 Nm 10 Nm 401 RQ Series Case Size WV (Vdc) Cap (uF) Size (mm) 160 160 160 160 160 160 160 200 200 200 200 200 200 200 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 350 350 6800 10000 15000 22000 22000 33000 47000 4700 6800 10000 15000 15000 22000 22000 3300 4700 6800 10000 10000 15000 22000 2700 3300 3300 3900 4700 4700 4700 5600 6800 8200 8200 10000 10000 10000 63.5x100 63.5x120 76.2x120 76.2x140 89x130 89x140 89x220 63.5x100 63.5x120 76.2x120 76.2x140 76.2x160 76.2x160 89x140 63.5x100 63.5x120 76.2x120 76.2x160 89x140 89x170 89x220 63.5x80 63.5x100 63.5x120 63.5x120 63.5x145 76.2x105 76.2x120 76.2x130 76.2x140 76.2x160 89x145 76.2x160 76.2x190 89x140 CapXon Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/105℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 11.0 16 29 12.5 11 20 15.5 7 13 20.0 5 9 21.0 5 9 22.0 3 6 28.0 3 5 8.8 24 42 12.0 16 29 13.5 11 20 16.0 7 13 17.0 7 13 22.0 5 9 24.0 5 9 7.5 33 60 9.5 24 42 13.0 16 29 15.0 11 20 16.0 11 20 20.0 7 13 24.5 5 9 16.0 41 74 16.5 33 60 17.5 33 60 17.7 28 51 18.6 24 42 22.4 24 42 23.0 24 42 24.0 20 36 26.0 16 29 30.0 13 24 34.5 13 24 30.5 11 20 33.0 11 20 38.4 11 20 Useful life Useful life 3.0 2.5   2.0 a R 1.5 0.0 40 50 60 70 Ta（℃） 80 90 100 6000H 10000H 20000H 50000H 0.5 100000H 250000H 1.0 110 depending on ambient temperature Ta versus under ripple current operating conditions 402 WV (Vdc) Cap (uF) Size (mm) 350 350 350 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 12000 12000 15000 18000 2200 2700 3300 3300 3300 3900 4700 4700 5600 6800 6800 8200 10000 12000 15000 2200 2200 2700 3300 3300 3900 4700 4700 5600 5600 6800 6800 6800 8200 10000 76.2x220 89x170 89x190 89x220 63.5x100 63.5x105 63.5x130 76.2x105 76.2x120 76.2x120 76.2x120 76.2x130 76.2x145 76.2x160 89x145 89x160 89x160 89x180 89x200 63.5x100 63.5x120 63.5x130 63.5x145 76.2x120 76.2x145 76.2x120 76.2x160 76.2x160 89x145 76.2x160 76.2x220 89x170 89x180 89x200 RQ Series Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/105℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 35.0 9 17 37.0 9 17 38.0 7 13 49.0 6 11 13.5 50 90 16.5 41 74 17.5 33 60 20.2 33 60 21.0 33 60 22.2 28 51 23.5 24 42 24.5 24 42 27.0 20 36 28.6 16 29 33.0 16 29 35.0 13 24 39.0 11 20 40.0 9 17 42.0 7 13 13.0 50 90 14.0 50 90 16.0 41 74 18.5 33 60 19.0 33 60 22.0 28 51 21.0 24 42 23.0 24 42 23.5 20 36 30.5 20 36 26.5 16 29 30.5 16 29 39.0 16 29 42.0 13 24 45.0 11 20 RT Series RT Series 85℃ Features Extremely Long useful life Applications ◆ Frequency converters ◆ Professional power supplies ◆ Traction Features ◆ Outstanding reliability ◆ Extra long useful life ◆ Wide temperature range ◆ Version with low-inductance design available ◆ All-welded construction ensures reliable electrical contact ◆ Self-extinguishing electrolyte ◆ RoHS-compatible Construction ◆ Charge-discharge proof, polar ◆ Aluminum case with insulating sleeve ◆ Poles with screw terminal connections ◆ Mounting with ring clips, clamps or threaded stud Specifications Item Performance Characteristics Operating Temperature Range -40 to +105℃(160Vdc~450Vdc) 160 to 450 V DC Rated voltage VR VR 315V 1.10 VR 2200 to 47000 µF Rated capacitance CR Capacitance tolerance ±20%(120Hz,+20℃) Leakage Current Ileak (+20℃.max.) Ileak =0.018x(CxV) 0.85 + 4 or 5mA, whichever is smaller (after 5 minutes) Where, Ileak: Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Screw Dissipation Factor (tanδ,at 20℃,120Hz) Less than the value under table(%) Working Voltage(VDC) D.F. (%)max. 160~450 15 d = 51 mm: approx. 17 nH Self-inductance ESL d ≧63.5 mm: approx. 20 nH Capacitors with low-inductance design: d ≧63.5 mm: approx. 15 nH Requirements: Useful life 105℃; VR,IAC,R >8000 h △C/C tanδ Ileak ≤±15% of initial value ≤1.75 times initial specified limit ≤ initial specified limit Post test requirements: Voltage Endurance test 105℃; VR 2000 h △C/C tanδ Ileak ≤±10% of initial value ≤1.3 times initial specified limit ≤ initial specified limit To IEC 60068-2-6, test Fc: Vibration Resistance test Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz, acceleration max. 10 g, duration 3x2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 120 Hz VR(V) Z-25℃ / Z 20℃ Z-40℃ / Z 20℃ Characteristics at low temperature Sectional specification 160-450 4 10 ≧500 4 - IEC 60384-4 and JIS-C-5101 Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier 50 0.8 120 1 300 1.2 1K 1.3 ≧3K 1.4 403 RT Series Dimensional drawings Threaded stud mounting CapXon 4700 µ F 450 V RT VENT 105 ℃ M5:Min.reach of screw = 8mm M6:Min.reach of screw = 12mm M8:Min.reach of screw = 16mm Dimensions Terminal M5 M5/M6 M5/M6 M8 d±2 63.5 76.2/89 76.2/89 100 L±3 80~140 100~240 100~240 100~240 Dimensions(mm) with insulating sleeve L1±3 L2+/-1 d1 86.5~146.5 16 M12 106.4~246.5 16 M12 106.4~246.5 16 M12 110~250 16 M12 Packing d2max. 10.3 10.3 17.5 17.5 a±0.5 28.6 31.8 31.8 41.5 Packing of screw length l(mm) all all all all Capacitor diameter d(mm) 63.5 76.2 89 100 Packing units (pcs.) 24 15 12 6 Accessories The following items are included in the delivery package, but are not fastened to the capacitors. For terminals For mounting Thread M5 M6 M8 M12 Maximum torque 2 Nm 2.5 Nm 5.0 Nm 10 Nm 404 RT Series Case Size WV (Vdc) Cap (uF) Size (mm) 160 160 160 160 160 160 160 200 200 200 200 200 200 200 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 350 350 6800 10000 15000 22000 22000 33000 47000 4700 6800 10000 15000 15000 22000 22000 3300 4700 6800 10000 10000 15000 22000 2700 3300 3300 3900 4700 4700 4700 5600 6800 8200 8200 10000 10000 10000 63.5x100 63.5x120 76.2x120 76.2x140 89x130 89x140 89x220 63.5x100 63.5x120 76.2x120 76.2x140 76.2x160 76.2x160 89x140 63.5x100 63.5x120 76.2x120 76.2x160 89x140 89x170 89x220 63.5x80 63.5x100 63.5x120 63.5x120 63.5x145 76.2x105 76.2x120 76.2x130 76.2x140 76.2x160 89x145 76.2x160 76.2x190 89x140 CapXon Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/105℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 12.0 15 29 13.8 10 20 17.0 7 13 22.0 5 9 23.0 5 9 24.0 3 6 31.0 3 5 9.7 22 42 13.5 15 29 15.0 10 20 17.5 7 13 18.5 7 13 24.0 5 9 26.0 5 9 8.3 32 60 10.5 22 42 14.5 15 29 16.5 10 20 17.5 10 20 22.0 7 13 27.0 5 9 17.5 39 74 18.0 32 60 19.0 32 60 19.5 27 51 20.5 22 42 24.6 22 42 25.5 22 42 26.5 19 36 28.5 15 29 33.0 13 24 39.0 13 24 33.5 10 20 36.0 10 20 42.0 10 20 Useful life Useful life 3.0 2.5 Ia IR 2.0 1.5 0.0 40 50 60 70 Ta（℃） 80 90 8000H 10000H 20000H 50000H 0.5 100000H 250000H 1.0 100 110 depending on ambient temperature Ta versus under ripple current operating conditions 405 WV (Vdc) Cap (uF) Size (mm) 350 350 350 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 12000 12000 15000 18000 2200 2700 3300 3300 3300 3900 4700 4700 5600 6800 6800 8200 10000 12000 15000 2200 2200 2700 3300 3300 3900 4700 4700 5600 5600 6800 6800 6800 8200 10000 76.2x220 89x170 89x190 89x220 63.5x100 63.5x105 63.5x130 76.2x105 76.2x120 76.2x120 76.2x120 76.2x130 76.2x145 76.2x160 89x145 89x160 89x160 89x180 89x200 63.5x100 63.5x120 63.5x130 63.5x145 76.2x120 76.2x145 76.2x120 76.2x160 76.2x160 89x145 76.2x160 76.2x220 89x170 89x180 89x200 RT Series Rated Ripple Typ. MAX current ESR 20℃ ESR 20℃ (Arms/105℃ 120Hz 120Hz /120Hz) (mΩ) (mΩ) 38.0 9 17 40.0 9 17 42.0 7 13 51.0 6 11 14.8 48 90 18.2 39 74 19.3 32 60 22.0 32 60 23.0 32 60 24.0 27 51 25.8 22 42 27.0 22 42 30.0 19 36 31.5 15 29 36.0 15 29 38.5 13 24 43.0 10 20 44.0 9 17 46.0 7 13 15.0 48 90 16.0 48 90 18.5 39 74 21.5 32 60 22.0 32 60 25.5 27 51 24.3 22 42 26.5 22 42 27.3 19 36 35.0 19 36 30.7 15 29 35.0 15 29 45.0 15 29 48.0 13 24 50.0 10 20 Disclaimer Disclaimer 1. Specification and description for the component(s) are subject to change without notice. 2. Operation conditions (ambient temperature, ripple current, thermal resistance, etc.) may affect the lifetime of a capacitor, please consult Capxon for life time calculation in your application. 3. For aerospace or military application and for life-saving or life-sustaining applications please consult us before design-in in your application. 4. Under no circumstance, Capxon warrants that any Capxon product is suitable for the purposes intended for your application, even Capxon knows the application It is buyer’s duty and obligation to check and make sure that Capxon’s products are suitable for the purposes intended and select the correct and proper Capxon product. 5. Except for the written express warranties, Capxon DO NOT, impliedly, by assumption or whatever else, warrant, undertake, promise any other warranty or guaranty for Capxon’s Products. 1. 零件的規格和說明如有更改，恕不另行通知。 2. 操作條件（環境溫度、紋波電流、熱阻等）可能 會影響電容器的壽命，您應用的壽命計算請諮詢 Capxon。 3. 對於航太或軍事應用以及安全維持生命的應用，在 您導入設計應用之前請向本公司諮詢。 4. 在任何情況下，Capxon不保證任何Capxon產品符 合您應用之預期目的，即使Capxon知悉該應用。檢 查並確保Capxon產品符合預期目的以及選擇正確和 適當的Capxon產品是買方的義務。 5. 除書面明示保證外，Capxon對於Capxon產品不以 假設或任何其他方式暗示保證、承擔、承諾任何其 他保證或擔保。 Contact us for any question on useage of our products inside your application, like safety, lifetime, reliability or assembling and mounting. Please refer to the guidelines inside this catalogue and the disclaimer. For further information visit our website: www.capxongroup.com 406 MEMO 407 MEMO 408 http://www.capxongroup.com CapXon P r o f e s s i o n a l ELECTROLYTIC CAPACITORS Catalog 2018/2019 英屬維京群島商凱普松科技股份有限公司 台灣分公司 Capxon Technology Limited Taiwan Branch 新北市汐止區大同路二段157號5樓 5F, No. 157, Da Tung Road, Sec. 2, XiZhi Dist., New Taipei City, 22183, Taiwan R. O. C. TEL : +886-2-8692-6611 FAX : +886-2-8692-6477 / 8692-6481 E-mail: sales@capxon.com.tw 英屬維京群島商凱普松科技股份有限公司 台灣分公司－歐洲辦事處 Capxon Europe Office Schwalbenweg 11 , 72793 Pfullingen , Germany TEL : +49-151-11355795 E-mail: sales@capxon-europe.com ※ 本商品目錄所記載的內容，可能會在沒有預先通知的情況下發生更改，敬請諒解。 ※ Specifications subject to change without notice Printed in May 2018 豐賓電子（深圳）有限公司 Capxon Electronic (Shen-Zhen) Co., Ltd. 518106 廣東省深圳市光明新區公明街道塘尾社區松白路4132號(塘尾工業區) No.4132, Songbai Road, Tangwei Village, Gongming Sub-district, Guangming New District, Shenzhen City, Guangdong, China Post Code : 518106 TEL : +86-755-2717-7888 FAX : +86-755-2717-7802 E-mail: sales@capxon.com.cn 豐賓電子（深圳）有限公司－蘇州辦事處 Capxon Electronic (Shen-Zhen) Co., Ltd. – Su-Zhou Office 江蘇省蘇州市高新區錦峰路158號3樓 Room 301-2,Building 22,NO.158 Jinfeng Road,High-tech Zone,Suzhou,China TEL : +86-0512-68780980 FAX : +86-512-68780981 E-mail: sales@capxon.com.cn Aluminum Electrolytic Capacitors AEC-Q200 IATF 16949 2018/2019 Aluminum Electrolytic Capacitors Conductive Polymer Capacitors Conductive Hybrid Capacitors