Insulated Tools
Klein insulated tools combine
excellent functionality along with
reduction of risk of injury where a
tool might make contact with an
energized source with voltage up
to 1000 volts.
~
Electrician's Insulated Tools
Insulated Tools
FORGED STEEL
from Klein's US-made, proprietary blend
Durable, three component molded insulation
provides protection against electric shock
Thick, exceptionally tough, high-dielectric
white inner coating is bonded to the tool
Induction hardened cutting knives for long life
Forged steel handle
Multi-color, sleek design with
small thumb guards for ease of
handling and storage
Hot-riveted joint ensures smooth
action and no handle wobble
A flame retardant, impact-resistant,
multi-color outer coating
~
Klein electrician's insulated tools meet or exceed IEC 60900: 2012, ASTM F1505,
and VDE standards and are clearly marked with the official 1000-volt rating symbol.
pliers available.
Cuts ACSR, screws, nails, and most hardened wire
The Electrician's line of insulated tools provides a multi-color, sleeker design than the Classic Lineman's insulated tools. 1000V rated and
individually tested to conform to ASTM F1505, IEC 60900. EINS tools have passed VDE third party testing certification to the IEC 60900
standard. This line of tools provides the everyday protection the electrician needs in a compact, lightweight design.
Catalog numbers for Klein electrician's insulated tools have the suffix "EINS" and are marked with the official international 1000-volt rating
symbol. Not all tools with plastic coatings or plastic handles provide protection against electrical shock. Only use those tools that are marked
with the official international 1000-volt rating symbol, as shown, if there is any chance that the tool will make contact with an energized
source. Product numbers with the EINS suffix contain these warnings below and must be understood.
WARNING: Only use tools that are marked with the official international 1000-volt
rating symbol shown below, if there is any chance
that the tools will make contact with an energized source.
WARNING: Wear approved eye protection. Always inspect your tools before use.
Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white
layer shows through orange layer.
46
www.kleintools.com
WARNING: Do NOT touch uninsulated portion of the tool or any
conductive object when either might contact an energized source.
WARNING: Whenever possible, always de-energize lines and equipment prior to
working on or around them. Klein insulated tools are designed only to reduce the chance
of injury where the tool may make contact with an energized source.
WARNING: Because moisture, films, or other surface contaminants are conductive,
Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
See page 310 for additional information on warnings.
Insulated Tools
3
R Y - 9NE E
EY PROT
N
CT N S
IO N
1
D2 A
E
W
~
Electrician's Insulated Pliers
Electrician's Insulated High-Leverage
Side-Cutting Pliers
Additional Features:
High-leverage design provides 46% greater cutting and gripping
power than other plier designs
Streamlined design with sure-gripping, cross-hatched knurled jaws
2000 Series cuts ACSR, screws, nails and most hardened wires
•
•
•
Cat. No.
213-8NE-EINS
213-9NE-EINS
Nose Type
New England
New England
Overall Length
8-13/16" (223.8 mm)
9-5/8" (244.5 mm)
Jaw Length
1-7/16" (36.5 mm)
1-19/32" (40.5 mm)
213-9NE-EINS
Jaw Width
1-7/64" (28.2 mm)
1-5/16" (33.3 mm)
Jaw Thickness
5/8" (15.9 mm)
5/8" (15.9 mm)
Knife Length
3/4" (19.1 mm)
25/32" (19.8 mm)
Weight
1.0 lbs. (0.45 kg)
1.3 lbs. (0.59 kg)
5/8" (15.9 mm)
25/32" (19.8 mm)
1.3 lbs. (0.59 kg)
2000 Series* – Heavy-duty cutting knives
2000-9NE-EINS
New England
9-5/8" (244.5 mm)
1-19/32" (40.5 mm)
1-5/16" (33.3 mm)
*Cuts ACSR, screws, nails, and most hardened wire. Features combination polished and black-oxide finish.
Electrician's Insulated High-Leverage
Diagonal Cutting Pliers
Additional Features:
High-leverage design. Rivet is closer to the cutting edge for 36% greater
cutting power than other pliers designs
Cuts ACSR, screws, nails, and most hardened wire. Features combination
polished and black-oxide finish
13° angled head for easier work in confined spaces (Cat. No. 2000-48-EINS)
•
•
•
Cat. No.
2000-28-EINS
2000-48-EINS
Nose Type
Tapered
Angled
Overall Length
8-1/4" (209.6 mm)
8-1/4" (209.6 mm)
Jaw Length
13/16" (20.6 mm)
13/16" (20.6 mm)
2000-28-EINS
Jaw Width
1-3/16" (30.2 mm)
1-3/16" (30.2 mm)
Jaw Thickness
7/16" (11.1 mm)
7/16" (11.1 mm)
Cutting Knives
Standard
Standard
Weight
11.2 oz. (318 g)
11.2 oz. (318 g)
Electrician's Insulated Long-Nose Pliers - Side-Cutting
Additional Features:
Induction-hardened cutting knives for long life
Knurled jaws for sure wrapping and looping
Cat. No. 203-8-EINS features heavier design for easier, more comfortable cutting and extended
handle for added reach and leverage
Cat. Nos. 203-6-EINS and 203-7-EINS has curved handles to provide greater tool control
•
•
•
•
203-8-EINS
203-7-EINS
Cat. No.
Overall Length
Jaw Length
Jaw Width
Jaw Thickness
Knife Length
Point Thickness
Weight
8-7/8" (225.4 mm)
2-5/16" (58.7 mm)
1" (25.4 mm)
1/2" (12.7 mm)
5/8" (15.9 mm)
1/8" (3.2 mm)
11.2 oz. (318 g)
6-7/8" (174.6 mm)
7-3/8" (187.3 mm)
1-15/16" (49.2 mm)
2-7/16" (61.9 mm)
11/16" (17.5 mm)
11/16" (17.5 mm)
3/8" (9.5 mm)
3/8" (9.5 mm)
1/2" (12.7 mm)
1/2" (12.7 mm)
3/32" (2.4 mm)
3/32" (2.4 mm)
4.8 oz. (136 g)
4.8 oz. (136 g)
Heavier Design
203-8-EINS
Standard Design
203-6-EINS
203-7-EINS
See page 310 for additional information on warnings.
47
www.kleintools.com
~
Insulated Tools
Electrician's Insulated Pliers
Electrician's Insulated Combination Pliers
Additional Features:
Crimping die behind hinge for superior leverage crimping non-insulated
connectors, lugs and terminals
Toothed pipe-grip for greater power
•
•
Cat. No.
12098-EINS
12098-EINS
Nose Type
Universal
Overall Length
8-7/8" (225.4 mm)
Jaw Length
1-25/32" (45.2 mm)
Jaw Width
1-1/32" (26.2 mm)
Jaw Thickness
1/2" (12.7 mm)
Knife Length
3/4" (19.1 mm)
Weight
1.0 lbs. (0.45 kg)
Electrician’s Insulated Pump Pliers
Additional Features:
Secure tongue and groove design for non-slip grip - even with heavy pressure
•
502-10-EINS
Cat. No.
502-10-EINS
Overall Length
10-1/4" (260.4 mm)
Max. Jaw Capacity
1-3/4" (44.5 mm)
Weight
1.0 lbs. (0.45 kg)
Electrician's Insulated Cable Cutter
Electrician's Insulated High-Leverage Cable Cutter
Additional Features:
High-leverage design for exceptional cutting capability
Cable-gripping shear-type jaws
Precision, one-hand shearing action
Perfect for working in confined spaces
Do NOT use to cut steel or ACSR
•
•
•
•
•
Cat. No.
63050-EINS
Overall Length
9-5/8" (244.5 mm)
63050-EINS
Maximum Cable Cutting Capacity
4/0 Aluminum, 2/0 Soft Copper, 100-Pair 24 AWG Communications Cable
Weight
1.0 lbs. (0.45 kg)
Electrician's Insulated Stripper/Cutter
Electrician's Insulated Solid &
Stranded Stripper/Cutter
Additional Features:
Cuts, strips, loops and gauges both solid and stranded wire
Spring-loaded for self-opening
Serrated nose for easy bending, shaping and pulling of wire
Cleanly shears 6-32 and 8-32 screws
Do not use for cutting steel wire
•
•
•
•
•
®
8 −16
AWG
8 AWG
10 −1
11054-EINS
Cat. No.
11054-EINS
Overall Length
8" (203.2 mm)
48
www.kleintools.com
Strips and Cuts
8 - 16 AWG Solid (8.4 mm² - 1.3 mm²), 10 - 18 AWG Stranded (5.3 mm² - 0.82 mm²)
Weight
8.0 oz. (227 g)
See page 310 for additional information on warnings.
N
CT N S
IO N
3
R Y - 9NE E
EY PROT
Insulated Tools
1
D2 A
E
W
Classic Insulated Tools
FORGED STEEL
from Klein's US-made, proprietary blend
Integral guards help prevent hand
contact with conductive parts
Thick, exceptionally tough, high-dielectric
white inner coating is bonded to the tool
Induction hardened cutting knives for long life
Forged steel handle
Hot-riveted joint
ensures smooth action
and no handle wobble
A flame retardant, impact-resistant,
bright orange outer coating
pliers available.
Cuts ACSR, screws, nails, and most hardened wire
All Classic Klein insulated tools comply with ASTM F-1505 and IEC 60900-2004 standards for insulated tools and are clearly marked with the
official international 1000-volt rating symbol. Not all tools with plastic coatings or plastic handles provide protection against electrical shock.
The large, bright orange handles make the tool comfortable to use all day and easy to identify in the field. Only use those tools that are marked
with the official international 1000-volt rating symbol, as shown, if there is any chance that the tool will make contact with an energized
source. Product numbers with the INS suffix contain
WARNING: Do NOT touch uninsulated portion of the tool or any
these warnings and must be understood.
conductive object when either might contact an energized source.
WARNING: Only use tools that are marked with the official international 1000-volt
rating symbol shown below, if there is any chance
that the tools will make contact with an energized source.
WARNING: Whenever possible, always de-energize lines and equipment prior to
working on or around them. Klein insulated tools are designed only to reduce the chance
of injury where the tool may make contact with an energized source.
WARNING: Wear approved eye protection. Always inspect your tools before use.
Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white
layer shows through orange layer.
WARNING: Because moisture, films, or other surface contaminants are conductive,
Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
Insulated High-Leverage Side-Cutting Pliers
Additional Features:
High-leverage design provides 46% greater cutting and gripping power than
other plier designs
Streamlined design with sure-gripping, cross-hatched knurled jaws
•
•
D213-9NE-INS
Cat. No.
D213-9NE-INS
Nose Type
New England
Overall Length
9-5/8" (244.5 mm)
Jaw Length
1-19/32" (40.5 mm)
Jaw Width
1-5/16" (33.3 mm)
Jaw Thickness
5/8" (15.9 mm)
Knife Length
25/32" (19.8 mm)
Weight
1.3 lbs. (0.59 kg)
5/8" (15.9 mm)
25/32" (19.8 mm)
25/32" (19.8 mm)
2000 Series* – Heavy-duty cutting knives
D2000-9NE-INS
New England
9-5/8" (244.5 mm)
1-19/32" (40.5 mm)
1-5/16" (33.3 mm)
*Cuts ACSR, screws, nails, and most hardened wire. Features combination polished and black-oxide finish.
Insulated High-Leverage Side-Cutting Pliers Connector Crimping
Additional Features:
Crimping die behind hinge for superior leverage crimping non-insulated
connectors, lugs and terminals
High-leverage design provides 46% greater cutting and gripping power than
other plier designs
Streamlined design with sure-gripping, cross-hatched knurled jaws
•
•
•
Cat. No.
D213-9NE-CR-INS
Nose Type
New England
Overall Length
9-5/8" (244.5 mm)
See page 310 for additional information on warnings.
Jaw Length
1-19/32" (40.5 mm)
D213-9NECR-INS
Jaw Width
1-5/16" (33.3 mm)
Jaw Thickness
5/8" (15.9 mm)
Knife Length
25/32" (19.8 mm)
Weight
1.3 lbs. (0.59 kg)
49
www.kleintools.com
Insulated Tools
Insulated Pliers – Classic
Insulated High-Leverage Universal Side-Cutting
Pliers - Connector Crimping
Additional Features:
Crimping die behind hinge for superior leverage crimping non-insulated
connectors, lugs and terminals
Toothed pipe-grip for greater power
•
•
Cat. No.
12098-INS
Nose Type
Universal
Overall Length
8-7/8" (225.4 mm)
12098-INS
Jaw Length
1-25/32" (45.2 mm)
Jaw Width
1-1/32" (26.2 mm)
Jaw Thickness
1/2" (12.7 mm)
Knife Length
3/4" (19.1 mm)
Weight
1.0 lbs. (0.45 kg)
Insulated High-Leverage Diagonal-Cutting Pliers
Additional Features:
High-leverage design. Rivet is closer to the cutting edge for 36% greater cutting
power than other pliers designs
13° angled head for easier work in confined spaces Cat. Nos. D248-8-INS and
D2000-48-INS series
•
•
Cat. No.
D228-8-INS
D248-8-INS
Nose Type
Tapered
Angled
Overall Length
8-1/4" (209.6 mm)
8-1/4" (209.6 mm)
Jaw Length
13/16" (20.6 mm)
13/16" (20.6 mm)
D228-8-INS
Jaw Width
1-3/16" (30.2 mm)
1-3/16" (30.2 mm)
Jaw Thickness
7/16" (11.1 mm)
7/16" (11.1 mm)
Cutting Knives
Standard
Standard
Weight
11.2 oz. (318 g)
11.2 oz. (318 g)
D2000-28-INS
Tapered
8-1/4" (209.6 mm)
13/16" (20.6 mm)
1-3/16" (30.2 mm)
D2000-48-INS
Angled
8-1/4" (209.6 mm)
13/16" (20.6 mm)
1-3/16" (30.2 mm)
*Cuts ACSR, screws, nails, and most hardened wire. Features combination polished and black-oxide finish.
7/16" (11.1 mm)
7/16" (11.1 mm)
Standard
Standard
11.2 oz. (318 g)
11.2 oz. (318 g)
2000 Series* – Heavy-duty cutting knives
Insulated Heavy-Duty Diagonal-Cutting Pliers Tapered Nose
Additional Features:
Heavy-duty tapered nose design
One-inch deep jaws easily reach into confined spaces
•
•
Cat. No.
D220-7-INS
Nose Type
Tapered
Overall Length
7-7/8" (200.0 mm)
D220-7-INS
Jaw Length
1" (25.4 mm)
Jaw Width
31/32" (24.6 mm)
Jaw Thickness
1/2" (12.7 mm)
Cutting Knives
Standard
Weight
11.2 oz. (318 g)
Insulated Long-Nose Pliers - Side-Cutting
Additional Features:
Knurled jaws for sure wrapping and looping
Cat. Nos. D203-8-INS and D203-8N has extended handles provide
added reach and leverage
Cat. Nos. D203-6-INS and D203-7-INS have curved handles to provide
greater tool control
Cat. No. D203-8N-INS has skinning hole for No. 12 AWG wire
•
•
•
•
D203-8N-INS
D203-7-INS
Cat. No.
Overall Length
Jaw Length
Jaw Width
Jaw Thickness
Cutting Knives
Knife Length
Weight
2-5/16" (58.7 mm)
2-5/16" (58.7 mm)
1" (25.4 mm)
1" (25.4 mm)
1/2" (12.7 mm)
1/2" (12.7 mm)
Standard
Standard
5/8" (15.9 mm)
5/8" (15.9 mm)
11.2 oz. (318 g)
11.2 oz. (318 g)
1-15/16" (49.2 mm)
2-7/16" (61.9 mm)
11/16" (17.5 mm)
11/16" (17.5 mm)
3/8" (9.5 mm)
3/8" (9.5 mm)
Standard
Standard
1/2" (12.7 mm)
1/2" (12.7 mm)
4.8 oz. (136 g)
4.8 oz. (136 g)
Heavier Design
D203-8-INS
D203-8N-INS
8-7/8" (225.4 mm)
8-7/8" (225.4 mm)
Standard Design
D203-6-INS
D203-7-INS
6-7/8" (174.6 mm)
7-3/8" (187.3 mm)
50
www.kleintools.com
See page 310 for additional information on warnings.
N
CT N S
IO N
3
R Y - 9NE E
EY PROT
Insulated Tools
1
D2 A
E
W
Insulated Pliers – Classic
Insulated Pump Pliers
Additional Features:
Secure tongue and groove design for non-slip grip - even with heavy pressure
•
Cat. No.
D502-10-INS
Overall Length
10-1/4" (260.4 mm)
Max. Jaw Capacity
1-3/4" (44.5 mm)
Weight
1.0 lbs. (0.45 kg)
D502-10-INS
Insulated Crimping/Cutting/Stripping Tools – Classic
Insulated Crimping/Cutting Tool
Additional Features:
Tapered nose design for working in confined spaces
Crimping dies marked for insulated and non-insulated solderless terminals and connectors
Accommodates wire from No. 10 to 22 AWG
Wire cutter in nose
•
•
•
•
Cat. No.
1005-INS
Overall Length
9-3/4" (247.7 mm)
Crimps
10 - 22 AWG
1005-INS
Weight
1.0 lbs. (0.45 kg)
Insulated High-Leverage Cable Cutter
Additional Features:
Special, high-leverage design for exceptional cutting capability
Cable-gripping shear-type jaws
Precision, one-hand shearing action
Perfect for working in confined spaces
Do NOT use to cut steel or ACSR
•
•
•
•
•
Cat. No.
63050-INS
Overall Length
9-5/8" (244.5 mm)
Maximum Cable Cutting Capacity
4/0 Aluminum, 2/0 Soft Copper,
100-Pair 24 AWG Communications Cable
63050-INS
Weight
1.0 lbs. (0.45 kg)
Insulated Wire Stripper/Cutters
Additional Features:
Cuts, strips, loops and gauges wire
Spring-loaded for self-opening
Compact, lightweight wire-stripping and cutting tool
Narrow nose fits into tight places
Do not use for cutting steel wire or bolts
Hardened spring steel with precision-ground stripping holes for easy removal of insulation
Cat. No. 11055-INS cleanly shears 6-32 and 8-32 screws
•
•
•
•
•
•
•
Cat. No.
11045-INS
Overall Length
7" (177.8 mm)
11049-INS
7" (177.8 mm)
11055-INS
8" (203.2 mm)
Strips and Cuts
10, 12, 14, 16, 18 Solid AWG (4.0 mm²,
2.5 mm², 1.5 mm², 1.0 mm², 0.75 mm²)
8, 10, 12, 14, 16 Stranded AWG (6.0 mm²,
4.0 mm², 2.5 mm², 1.5 mm², 1.0 mm²)
10, 12, 14, 16, 18 AWG Solid (4.0 mm²,
2.5 mm², 1.5 mm², 1.0 mm², 0.75 mm²)
12, 14, 16, 18, 20 AWG Stranded (2.5 mm²,
1.5 mm², 1.0 mm², 0.82 mm², 0.50 mm²)
See page 310 for additional information on warnings.
8 −16
AWG
11049-INS
Weight
9.6 lbs. (4.35 kg)
9.6 lbs. (4.35 kg)
12.0 lbs. (5.44 kg)
8 AWG
10 −1
0 AWG
12 − 2
®
11055-INS
51
www.kleintools.com
Insulated Tools
Insulated Screwdrivers
FORGED STEEL
from Klein's US-made,
proprietary blend
Klein insulated tools meet or exceed the
IEC 60900 and ASTM F1505 standards,
for insulated tools, and are clearly marked
with the official 1000-volt rating symbol
Durable, two layer,
molded insulation
Cushion-Grip handles
for greater torque and comfort
Bright orange outer coating
is flame and impact resistant
Thick, exceptionally tough,
high-dielectric white inner
coating is bonded to the tool
Tip-Ident® quickly
identifies driver size
WARNING: Only use tools that are marked with the official international 1000-volt
rating symbol shown below, if there is any chance
that the tools will make contact with an energized source.
WARNING: Wear approved eye protection. Always inspect your tools before use.
Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white
layer shows through orange layer.
Product numbers with the INS suffix contain these warnings
and must be understood.
WARNING: Do NOT touch uninsulated portion of the tool or any
conductive object when either might contact an energized source.
WARNING: Whenever possible, always de-energize lines and equipment prior to
working on or around them. Klein insulated tools are designed only to reduce the chance
of injury where the tool may make contact with an energized source.
WARNING: Because moisture, films, or other surface contaminants are conductive,
Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
Insulated Screwdrivers - Round-Shank
Additional Features:
Profilated Phillips-tip provides a more consistent geometric
symmetry than conventional Phillips-tip screwdrivers
Square-Recess tips are perfect for electrical, telephone and work in
recessed holes and other tight spaces
•
•
603-7-INS
661-7-INS
Cat. No.
6334INS
603-4-INS
6037INS
6337INS
607-3-INS
612-4-INS
601-4-INS
601-7-INS
602-4-INS
605-7-INS
602-7-INS
602-8-INS
661-4-INS
661-7-INS
662-4-INS
662-7-INS
Tip Type
Phillips
Phillips
Phillips
Phillips
Cabinet Tip
Cabinet Tip
Cabinet Tip
Cabinet Tip
Cabinet Tip
Cabinet Tip
Cabinet Tip
Cabinet Tip
Square
Square
Square
Square
52
www.kleintools.com
Tip Size
#1
#2
#2
#1
3/32" (2.4 mm)
1/8" (3.2 mm)
3/16" (4.8 mm)
3/16" (4.8 mm)
1/4" (6.4 mm)
1/4" (6.4 mm)
5/16" (7.9 mm)
3/8" (9.5 mm)
#1
#1
#2
#2
Shank Length
4" (101.6 mm)
4" (101.6 mm)
7" (177.8 mm)
7" (177.8 mm)
3" (76.2 mm)
4" (101.6 mm)
4" (101.6 mm)
7" (177.8 mm)
4" (101.6 mm)
7" (177.8 mm)
7" (177.8 mm)
8" (203.2 mm)
4" (101.6 mm)
7" (177.8 mm)
4" (101.6 mm)
7" (177.8 mm)
Overall Length
7-3/4" (196.9 mm)
8-5/16" (211.1 mm)
11-5/16" (287.3 mm)
12-3/8" (314.3 mm)
6-3/4" (171.5 mm)
7-3/4" (196.9 mm)
7-3/4" (196.9 mm)
10-3/4" (273.1 mm)
8-5/16" (211.1 mm)
11-5/16" (287.3 mm)
12-3/8" (314.3 mm)
13-3/8" (339.7 mm)
8-5/16" (211.1 mm)
11-5/16" (287.3 mm)
8-5/16" (211.1 mm)
11-5/16" (287.3 mm)
Weight
2.1 oz. (60 g)
3.2 lbs. (1.45 kg)
4.0 lbs. (1.81 kg)
6.4 lbs. (2.90 kg)
1.9 lbs. (0.86 kg)
2.1 oz. (60 g)
2.1 oz. (60 g)
2.7 lbs. (1.22 kg)
3.2 lbs. (1.45 kg)
4.0 lbs. (1.81 kg)
6.4 lbs. (2.90 kg)
8.0 oz. (227 g)
3.2 lbs. (1.45 kg)
3.2 lbs. (1.45 kg)
3.2 lbs. (1.45 kg)
3.2 lbs. (1.45 kg)
See page 310 for additional information on warnings.
N
CT N S
IO N
3
R Y - 9NE E
EY PROT
Insulated Tools
1
D2 A
E
W
2-Piece Insulated 4" (102 mm)
Screwdriver Set - Round Shanks
Additional Features:
Includes one 1/4" (6 mm) cabinet-tip and one #2 Phillips-tip
•
33532-INS
Cat. No.
33532-INS
Set Contains
Weight
9.6 oz. (272 g)
Cat. No.
Tip Type
Tip Size
Shank Length
Overall Length
602-4-INS
603-4-INS
Cabinet Tip
Phillips
1/4" (6.4 mm)
#2
4" (101.6 mm)
4" (101.6 mm)
8-5/16" (211.1 mm)
8-5/16" (211.1 mm)
9-Piece Insulated Cushion-Grip Screwdriver Set
• Features three sizes of each tip style: cabinet, keystone, and Phillips
durable, black nylon case features: nylon-zipper closure, polypropylene
• Highly
handles, custom-fitted tool pockets; extra pocket is provided for storage of papers
•
•
or other items
Overall dimensions: 15-1/2" W x 11" D x 2-1/2" H (394 mm x 279 mm x 64 mm)
Replacement case (Cat. No. 33538) available
33528
Cat. No.
33528
Set Contains
Weight
5.4 lbs. (2.45 kg)
Cat. No.
Tip Type
Tip Size
Shank Length
Overall Length
601-4-INS
601-7-INS
612-4-INS
602-4-INS
602-7-INS
602-8-INS
6334INS
603-4-INS
6337INS
33538
Cabinet Tip
Cabinet Tip
Cabinet Tip
Cabinet Tip
Cabinet Tip
Cabinet Tip
Phillips
Phillips
Phillips
heavy-duty polyester case
3/16" (4.8 mm)
3/16" (4.8 mm)
1/8" (3.2 mm)
1/4" (6.4 mm)
5/16" (7.9 mm)
3/8" (9.5 mm)
#1
#2
#1
4" (101.6 mm)
7" (177.8 mm)
4" (101.6 mm)
4" (101.6 mm)
7" (177.8 mm)
8" (203.2 mm)
4" (101.6 mm)
4" (101.6 mm)
7" (177.8 mm)
7-3/4" (196.9 mm)
10-3/4" (273.1 mm)
7-3/4" (196.9 mm)
8-5/16" (211.1 mm)
12-3/8" (314.3 mm)
13-3/8" (339.7 mm)
7-3/4" (196.9 mm)
8-5/16" (211.1 mm)
12-3/8" (314.3 mm)
See page 310 for additional information on warnings.
53
www.kleintools.com
Insulated Tools
Insulated Nut Drivers
FORGED STEEL
from Klein's US-made,
proprietary blend
Klein insulated tools meet or exceed the
IEC 60900 and ASTM F1505 standards,
for insulated tools, and are clearly marked
with the official 1000-volt rating symbol
Cushion-Grip handles
for greater torque and comfort
Thick, exceptionally tough,
high-dielectric white inner
coating is bonded to the tool
Durable, two layer, molded insulation
Bright orange outer coating
is flame and impact resistant
Hollow shafts make it possible
to work on stacked circuit boards
or other long bolt applications
WARNING: Only use tools that are marked with the official international 1000-volt
rating symbol shown below, if there is any chance
that the tools will make contact with an energized source.
WARNING: Wear approved eye protection. Always inspect your tools before use.
Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white
layer shows through orange layer.
Product numbers with the INS suffix contain these warnings
and must be understood.
Tip-Ident® quickly
identifies nut driver size
WARNING: Do NOT touch uninsulated portion of the tool or any
conductive object when either might contact an energized source.
WARNING: Whenever possible, always de-energize lines and equipment prior to
working on or around them. Klein insulated tools are designed only to reduce the chance
of injury where the tool may make contact with an energized source.
WARNING: Because moisture, films, or other surface contaminants are conductive,
Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
6" (152 mm) Insulated Hollow-Shaft Nut Drivers
Additional Features:
Slimmer molded insulation with increased durability
•
Cat. No.
646-3/16-INS*
646-1/4-INS
646-5/16-INS
646-11/32-INS
646-3/8-INS
646-7/16-INS
646-1/2-INS
646-9/16-INS
646-5/8-INS
Color Code
Black
Red
Yellow
Green
Blue
Brown
Red
Orange
Yellow
646-5/8-INS
Hex Size
3/16"
1/4"
5/16"
11/32"
3/8"
7/16"
1/2"
9/16"
5/8"
Overall Length
9-3/4" (247.7 mm)
9-3/4" (247.7 mm)
9-3/4" (247.7 mm)
9-3/4" (247.7 mm)
10-5/16" (261.9 mm)
10-5/16" (261.9 mm)
11-3/8" (288.9 mm)
11-3/8" (288.9 mm)
11-3/8" (288.9 mm)
Weight
2.4 lbs. (1.09 kg)
3.2 lbs. (1.45 kg)
3.2 lbs. (1.45 kg)
3.2 lbs. (1.45 kg)
4.0 lbs. (1.81 kg)
4.0 lbs. (1.81 kg)
5.6 oz. (159 g)
6.4 lbs. (2.90 kg)
6.4 lbs. (2.90 kg)
*3/16" magnetic nut driver does not have hollow shaft
54
www.kleintools.com
See page 310 for additional information on warnings.
N
CT N S
IO N
3
R Y - 9NE E
EY PROT
Insulated Tools
1
D2 A
E
W
Insulated Nut Driver Sets
9-Piece Insulated Cushion-Grip Hollow-Shaft
Nut Driver Set - 6" (152 mm) Shafts
Additional Features:
Features assortment of popular sized nut drivers
Highly durable, black nylon case features: nylon-zipper closure, polypropylene
handles, custom-fitted tool pockets; extra pocket is provided for storage of
papers or other items
Overall case dimensions are: 15" W x 12-3/4" L x 3-1/2" D (381 mm x 324 mm
x 89 mm)
Replacement case available Cat. No. 33534
•
•
•
•
33524
Cat. No.
33524
Set Contains
Weight
6.0 lbs. (2.72 kg)
Cat. No.
Color Code
646-3/16-INS
646-1/4-INS
646-5/16-INS
646-11/32-INS
646-3/8-INS
646-7/16-INS
646-1/2-INS
646-9/16-INS
646-5/8-INS
33534
Black
3/16"
Red
1/4"
Yellow
5/16"
Green
11/32"
Blue
3/8"
Brown
7/16"
Red
1/2"
Orange
9/16"
Yellow
5/8"
Custom heavy-duty Cordura® case
Hex Size
Overall Length
9-3/4" (247.7 mm)
9-3/4" (247.7 mm)
9-3/4" (247.7 mm)
9-3/4" (247.7 mm)
10-5/16" (261.9 mm)
10-5/16" (261.9 mm)
11-3/8" (288.9 mm)
11-3/8" (288.9 mm)
11-3/8" (288.9 mm)
Cordura® is a registered trademark of INVISTA for durable fabrics.
*3/16" magnetic nut driver does not have hollow shaft
Insulated Skinning Knife
Insulated Lineman's Skinning Knife
• Molded measuring marks on back of handle to help measure stripping length of wire
• Large molded handle for an easier, more comfortable grip
tempered steel blade provides maximum sharpness and durability to
• Tough,
withstand frequent cable scoring
1571-INS
Cat. No.
1571INS
Blade Length
2-3/8" (60.3 mm)
See page 310 for additional information on warnings.
Handle Color
Orange
Overall Length
8-3/4" (222.3 mm)
Weight
5.6 oz. (159 g)
55
www.kleintools.com
Insulated Tools
Insulated Tool Kits
General-Purpose Insulated
22-Piece Tool Kit
includes three pallets with custom-fitted pockets for each tool, piano• Case
hinged cover has both a combination lock and two key-locked latches for
•
•
•
security, storage space behind the pallets to keep important papers and
accessory items
Inside dimensions: 7-3/4" W x 14-1/4" D x 8" H (197 mm x 362 mm x 203 mm)
Overall dimensions: 18-7/8" W x 15-3/8" D x 8-1/4" H (479 mm x 391 mm x 210
mm)
Replacement case (Cat. No. 33537) available
Cat. No.
33527
Kit Contains
Weight
24.3 lbs. (11.0 2kg)
Cat. No.
Description
D2000-9NE-INS
12098-INS
D2000-28-INS
D2000-48-INS
D203-8N-INS
D220-7-INS
D203-6-INS
D203-7-INS
601-4-INS
601-7-INS
612-4-INS
602-4-INS
602-7-INS
602-8-INS
6334INS
603-4-INS
6337INS
D502-10-INS
11045-INS
63050-INS
1571INS
1005-INS
33537
9" Side Cutting Pliers Heavy Duty
Side Cutting Pliers Crimping Insulated
8" Insulated Diagonal Cutting Pliers
8" Insulated HD Diagonal Cutting Pliers
8" Insulated HD Long Nose Pliers
7" Insulated Diagonal Cutting Pliers
6" Insulated Long Nose Cutting Pliers
7" Long Nose Pliers Side Cutting
Insulated 3/16" Cabinet - 4" Screwdriver
Insulated 3/16" Cabinet - 7" Screwdriver
Insulated 1/8" Slotted - 4" Screwdriver
Insulated 1/4" Cabinet - 4" Screwdriver
Insulated 5/16" Cabinet - 7" Screwdriver
Insulated 3/8" Cabinet - 8" Screwdriver
Insulated #1 Phillips - 4" Screwdriver
Insulated #2 Phillips - 4" Screwdriver
Insulated #1 Phillips - 7" Screwdriver
10" Pump Pliers, Insulated
Insulated Wire Stripper and Cutter
Cable Cutter, Insulated, High Leverage
Lineman's Skinning Knife, Insulated
Insulated Crimping/Cutting Tool
Case for Insulated Tool Kit 33527
56
www.kleintools.com
33527
See page 310 for additional information on warnings.
N
CT N S
IO N
3
R Y - 9NE E
EY PROT
Insulated Tools
1
D2 A
E
W
Insulated Tool Kits
Utility Insulated 13-Piece Tool Kit
custom case includes two pallets with custom-fitted
• The
pockets for each tool, piano-hinged case cover has both
•
•
•
a combination lock and two key-locked latches for security,
storage space behind the pallets to keep important papers and accessory items
Inside dimensions: 17-3/4" W x 14-1/4" D x 8" H (451 mm x 362 mm x 203 mm)
Overall dimensions: 18-7/8" W x 15-3/8" D x 8-1/4" H (79 mm x 391 mm x 210 mm)
Replacement case (Cat. No. 33535) available
Cat. No. Kit Contains
33525
Weight
20.1 lbs. (9.12 kg)
Cat. No.
Description
D2000-9NE-INS
D2000-28-INS
D2000-48-INS
D203-8-INS
602-4-INS
602-7-INS
602-8-INS
6334INS
603-4-INS
6337INS
63050-INS
D502-10-INS
1571INS
33535
9" Side Cutting Pliers Heavy Duty
8" Insulated Diagonal Cutting Pliers
8" Insulated HD Diagonal Cutting Pliers
8" Insulated Long Nose Cutting Pliers
Insulated 1/4" Cabinet - 4" Screwdriver
Insulated 5/16" Cabinet - 7" Screwdriver
Insulated 3/8" Cabinet - 8" Screwdriver
Insulated #1 Phillips - 4" Screwdriver
Insulated #2 Phillips - 4" Screwdriver
Insulated #1 Phillips - 7" Screwdriver
Cable Cutter, Insulated, High Leverage
10" Pump Pliers, Insulated
Lineman's Skinning Knife, Insulated
Case for Utility Tool Kit 33525
33525
Utility Insulated 13-Piece Tool Kit
with Roll-up Case
light, compact, soft roll-up carry case provides protective
• The
storage with custom-fitted pockets for each tool
• Kit includes a padded, adjustable shoulder strap
dimensions: Opened 24-1/2" x 24-1/2" (622 mm x 622
• Case
mm), Closed 24-1/2" x 5-1/2" (622 mm x 140 mm)
• Replacement roll-up case (Cat. No. 33535SC) available
Cat. No. Kit Contains
33525SC
Weight
9.8 lbs. (4.45 kg)
Cat. No.
Description
D2000-9NE-INS
D2000-28-INS
D2000-48-INS
D203-8-INS
602-4-INS
602-7-INS
602-8-INS
6334INS
603-4-INS
6337INS
63050-INS
D502-10-INS
1571INS
33535SC
9" Side Cutting Pliers Heavy Duty
8" Insulated Diagonal Cutting Pliers
8" Insulated HD Diagonal Cutting Pliers
8" Insulated Long Nose Cutting Pliers
Insulated 1/4" Cabinet - 4" Screwdriver
Insulated 5/16" Cabinet - 7" Screwdriver
Insulated 3/8" Cabinet - 8" Screwdriver
Insulated #1 Phillips - 4" Screwdriver
Insulated #2 Phillips - 4" Screwdriver
Insulated #1 Phillips - 7" Screwdriver
Cable Cutter, Insulated, High Leverage
10" Pump Pliers, Insulated
Lineman's Skinning Knife, Insulated
Case for Utility Tool Kit 33525SC
See page 310 for additional information on warnings.
33525SC
57
www.kleintools.com
Insulated Tools
Insulated Tool Kits
Premium Insulated 8-Piece Tool Kit
No. D2000-9NE-INS and D2000-48-INS cut ACSR, screws,
• Cat.
nails and most hardened wire
durable, black nylon case features: nylon-zipper closure,
• Highly
polypropylene handles, custom-fitted tool pockets
case dimensions are: 15-1/2" W x 11" D x 2-1/2" H (394
• Overall
mm x 279 mm x 64 mm)
• Replacement case (Cat. No. 33536) available
Cat. No.
33529
Kit Contains
Weight
6.9 lbs. (3.13 kg)
Cat. No.
Description
D2000-9NE-INS
D2000-48-INS
D203-8N-INS
601-6-INS
602-4-INS
603-4-INS
63050-INS
11055-INS
33536
9" Side Cutting Pliers Heavy Duty
8" Insulated HD Diagonal Cutting Pliers
8" Insulated HD Long Nose Pliers
Insulated 3/16" Cabinet - 6" Screwdriver
Insulated 1/4" Cabinet - 4" Screwdriver
Insulated #2 Phillips - 4" Screwdriver
Cable Cutter, Insulated, High Leverage
Klein-Kurve® Wire Stripper Insulated
Case for Insulated Tool Kit 33529
See individual tool listings for more details.
33529
Basic Insulated 8-Piece Tool Kit
durable, black nylon case features: nylon-zipper closure,
• Highly
polypropylene handles, custom-fitted tool pockets
case dimensions are: 15-1/2" W x 11" D x 2-1/2" H (394
• Overall
mm x 279 mm x 64 mm)
• Replacement case (Cat. No. 33536) available
Cat. No.
33526
Kit Contains
Weight
6.9 lbs. (3.13 kg)
Cat. No.
Description
D213-9NE-INS
D228-8-INS
D203-8N-INS
601-6-INS
602-4-INS
603-4-INS
63050-INS
11045-INS
33536
9" Insulated Side Cutting Pliers
8" Insulated, Diagonal-Cutters
8" Insulated HD Long Nose Pliers
Insulated 3/16" Cabinet - 6" Screwdriver
Insulated 1/4" Cabinet - 4" Screwdriver
Insulated #2 Phillips - 4" Screwdriver
Cable Cutter, Insulated, High Leverage
Insulated Wire Stripper and Cutter
Case for Insulated Tool Kit 33529
See individual tool listings for more details.
33526
58
www.kleintools.com
See page 310 for additional information on warnings.
工商网监
湘ICP备2023018690号
