10415

1 A B 2 3 4 5 6 7 CUSTOMER DRAWING SHEET 2 ONLY 8 9 10 11 12 REV. DATE 1 02/04/08 1A 17/03/11 1B 05/12/11 13 14 15 D.C.N. NUMBER 16 17 18 19 20 CHECKED BY APPROVED BY DATE DATE DESCRIPTION FIRST ISSUE NAME dd/mm/yy NAME dd/mm/yy 03/11/1291 NOTE CHANGE + DIM CHANGE NAME dd/mm/yy NAME dd/mm/yy 12-11-1322 DRAWING UPDATED WITH NEW DRW. STANDARDS AND NEW CARCLO OPTICS FORMAT FOR FULL DETAILS SEE D.C.N PW 16/07/12 MH 16/07/12 C 9.90± 0.10 -DRAFT == D TOP VIEW E F 8.00± 0.05 == BOTTOM VIEW PCB TOP VIEW 2.45± 0.10 4 OFF +DRAFT 9.90± 0.10 -DRAFT == 0.30± 0.10 TYP 8.00± 0.05 == C SCALE 4:1 G LINEAR RIPPLE SURFACE C 1.00± 0.10 2 OFF 1.44±0.10 GLUE PADS H 6.4 REF 8.00± 0.05 == 1.4 4 OFF 8.00± 0.05 == LED LENS POSITION 0.40± 0.10 2 OFF 6.0±0.1 I 1.10 x 0.7 DEEP LOCATION HOLE 2 OFF DIAGONAL SECTION C-C L PCB SAMPLE LAYOUT BASED ON A STANDARD THICKNESS 1.5mm + COATING SCALE 4:1 M NOTES: 1 - MATERIAL: POLYCARBONATE N O SCALE 2 - FINISH: COMMERCIAL POLISH FOR ALL NON OPTICAL SURFACES. OPTICAL SURFACES ARE OPTICALLY POLISHED Sheet 2 3 - OVERALL PART THICKNESS = SEE 3D FILE Title 4 - COLOUR CLEAR 6 - SIMPLIFIED GEOMETRY SHOWN. NOT SUITABLE FOR OPTICAL RAYTRACE THIRD ANGLE PROJECTION FP GENERAL TOLERANCES UNLESS OTHERWISE STATED LINEAR ANGULAR 0 ± 0.0 ± 0.00 ± 0.25 0.1 0.05 0 ± 0.0 ± 0.00 ± of 2 10mm SQUARE ELLIPTICAL BEAM OPTIC Drawn by 5 - GENERAL DRAFT 2° P 1:1 1° 0.5 ° 0.1 ° Customer CARCLO CARCLO Optics CONFIDENTIAL: UNAUTHORISED COPYING, DISCUSSION & DISTRIBUTION PROHIBITED Scale DIMENSIONS IN mm CAD File 60518 Part N° 10415 Format Size Drw N° 60518 AS SPEC. A3