10413

1 A B 2 3 4 5 6 7 CUSTOMER DRAWING SHEET 2 ONLY 8 9 10 11 12 13 14 15 D.C.N. NUMBER 16 17 18 19 20 CHECKED BY APPROVED BY DATE DATE REV. DATE DESCRIPTION 1 25/06/07 FIRST ISSUE NAME dd/mm/yy NAME dd/mm/yy 2 04/10/07 CHANGE TO DOME PIPS NAME dd/mm/yy NAME dd/mm/yy 2A 05/12/11 DRAWING UPDATED WITH NEW DRW. STANDARDS AND NEW CARCLO OPTICS FORMAT FOR FULL DETAILS SEE D.C.N PW 16/07/12 MH 16/07/12 12-11-1322 C D TOP VIEW 8.00± 0.05 == BOTTOM VIEW 2.45± 0.10 4 OFF +DRAFT E F 9.90± 0.10 -DRAFT == PCB TOP VIEW 9.90± 0.10 -DRAFT == 0.30± 0.10 TYP G 8.00± 0.05 == C 8.00± 0.05 == 1.4 4 OFF C GLUE PADS 8.00± 0.05 == LED LENS POSITION MEDIUM FROSTED FINISH 1.10 x 0.7 DEEP LOCATION HOLE 2 OFF DIAGONAL H I 1.44±0.10 6.40 REF L 1.00± 0.10 2 OFF PCB SAMPLE LAYOUT BASED ON A STANDARD THICKNESS 1.5mm + COATING SCALE 4:1 0.40± 0.10 2 OFF 6.00±0.10 SECTION C-C M SCALE NOTES: 1:1 1 - MATERIAL: POLYCARBONATE N O 2 - FINISH: COMMERCIAL POLISH FOR ALL NON OPTICAL SURFACES. OPTICAL SURFACES ARE OPTICALLY POLISHED SCALE 4:1 Sheet 2 3 - OVERALL PART THICKNESS = SEE 3D FILE Title 4 - COLOUR CLEAR 5 - GENERAL DRAFT 2° P 6 - SIMPLIFIED GEOMETRY SHOWN. NOT SUITABLE FOR OPTICAL RAYTRACE 10mm SQUARE MEDIUM FROSTED OPTIC FP Drawn by THIRD ANGLE PROJECTION GENERAL TOLERANCES UNLESS OTHERWISE STATED LINEAR ANGULAR 0 ± 0.0 ± 0.00 ± 0.25 0.1 0.05 0 ± 0.0 ± 0.00 ± of 2 1° 0.5 ° 0.1 ° Customer CARCLO CARCLO Optics CONFIDENTIAL: UNAUTHORISED COPYING, DISCUSSION & DISTRIBUTION PROHIBITED Scale DIMENSIONS IN mm CAD File 60526 Part N° 10413 Format Size Drw N° 60526 AS SPEC. A3