LCD-OLINUXINO-4.3TS

晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified GIF SPECIFICATIONS AR CUSTOMER : MODEL NO. : GFT043HA480272Y Version : A TEC DATE : 2011.02.14 CERTIFICATION : LOG HNO Customer Sign ROHS Sales Sign Approved By Prepared By GIFAR GIFAR 2011.02.14 2011.02.14 HAZEL DONLIN Y 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD 台北縣樹林市中山路二段 249 巷 11 號 No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. TEL: +886-2-2680-7766 FAX: +886-2-2668-8378 TEL: +886-2-2680-7766 PAGE 1/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified GIF Revision Record Data(y/m/d) Ver. 2011.02.14 A Description Note page Specification released AR Y LOG HNO TEC TEL: +886-2-2680-7766 PAGE 2/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified GIF Contents 1. General Specifications …………………………………………………………….…………………4 2. Pin Assignment …………………………………………………………………….………….……..5 2.1. TFT LCD Panel Driving Section.................................................................................................5 AR 2.2. Touch Screen Panel Section.........................................................................................................7 3. Operation Specifications…………………………………………..……………….…………………8 3.1. Absolute Maximum Ratings ........................................................................................................8 3.2. Typical operation conditions .......................................................................................................9 3.3 Backlight Driving Conditions .......................................................................................................9 TEC 3.4. Power Sequence .........................................................................................................................10 3.5. Timing Characteristics ................................................................................................................11 3.5.1. Timing Conditions..............................................................................................................11 3.5.2. Timing Diagram .................................................................................................................12 4. Touch Screen Panel Specifications …………………………………………………………………..13 4.1. Electrical Characteristics ............................................................................................................13 LOG HNO 4.2. Mechanical & Reliability Characteristics .................................................................................. 14 4.3. Linearity Definition ....................................................................................................................15 4.4. Housing design guide …………………………………………………………………………..16 5. Optical Specifications ……………………………….…………………………………………….....17 6. Reliability Test Items …………………………………..…………………………………………….21 7. General Precautions ………………………………………………………………………………….22 7.1. Safety ..........................................................................................................................................22 7.2. Handling .....................................................................................................................................22 7.3. Static Electricity..........................................................................................................................22 7.4. Storage ........................................................................................................................................22 7.5. Cleaning .....................................................................................................................................22 8. Mechanical Drawing ……………………..………………………………………………………….23 Y TEL: +886-2-2680-7766 PAGE 3/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified GIF 1.General Specifications No. Specification 1 LCD size 4.3 inch(Diagonal) 2 Driver element a-Si TFT active matrix 3 Resolution 480 × 3(RGB) × 272 4 Display mode Normally White, Transmissive 5 Dot pitch 0.066(W) × 0.198(H) mm 6 Active area 95.04 (W) × 53.856(H) mm 7 Module size 8 Surface treatment Anti-Glare 9 Color arrangement RGB-stripe 10 Interface 11 Backlight Power consumption 0.558W(Typ.) Note 2 12 Panel Power consumption 0.056W(Typ.) Note 3 AR Item TEC 105.5(W) × 67.2(H) × 4.05(D) mm Note 1 LOG HNO Note 1: Refer to Mechanical Drawing. Remark Digital Y TEL: +886-2-2680-7766 PAGE 4/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified GIF 2.Pin Assignment 2.1. TFT LCD Panel Driving Section FPC Connector is used for the module electronics interface. The recommended model is “FH19SC-40S-0.5SH” manufactured by HIROSE. Symbol I/O Function 1 VLED- P Power for LED backlight cathode 2 VLED+ P Power for LED backlight anode 3 GND P Power ground 4 VDD P Power voltage 5 R0 I Red data (LSB) 6 R1 I Red data 7 R2 I Red data 8 R3 I Red data 9 R4 I Red data 10 R5 I Red data 11 R6 I Red data 12 R7 I Red data (MSB) 13 G0 I Green data (LSB) 14 G1 I Green data 15 G2 I Green data 16 G3 I Green data 17 G4 I Green data 18 G5 I Green data 19 G6 I Green data 20 G7 I Green data (MSB) AR Pin No. PAGE 5/24 Y LOG HNO TEC TEL: +886-2-2680-7766 Remark FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC B0 I Blue data (LSB) 22 B1 I Blue data 23 B2 I Blue data 24 B3 I Blue data 25 B4 I Blue data 26 B5 I Blue data 27 B6 I Blue data 28 B7 I Blue data (MSB) 29 GND P Power ground 30 CLK I Pixel clock 31 DISP I Display on/off 32 NC - No connection 33 NC - No connection 34 DE I Data Enable 35 NC - No connection 36 GND P Power ground 37 X1 I/O Right electrode – differential analog 38 Y1 I/O Bottom electrode – differential analog 39 X2 I/O Left electrode – differential analog 40 Y2 I/O Top electrode – differential analog AR GIF 21 Environmentally Certified Y LOG HNO TEC Note: I: input, O: output t, P: Power TEL: +886-2-2680-7766 PAGE 6/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified 2.2. Touch Screen Panel Section GIF Pin No. Symbol I/O 1 X1 Right 2 Y1 Bottom 4 Remark Right electrode – differential analog Bottom electrode – differential analog AR 3 Function X2 Left Left electrode – differential analog Y2 Top Top electrode – differential analog Note: Touch Screen Panel Block Y LOG HNO TEC TEL: +886-2-2680-7766 PAGE 7/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified GIF 3. Operation Specifications 3.1. Absolute Maximum Ratings Item Symbol Power voltage Values Unit Remark Max. VCC -0.5 5.0 V Logic input -0.5 5.0 V Operation temperature TOP -20 70 ℃ Note 3,4 Storage temperature TST -30 80 ℃ Note 3,4 LED Reverse Voltage VR - 1.2 V Each LED Note 2 LED Forward Current IF - 25 mA Each LED Input signal voltage AR Min. LOG HNO TEC Note 1: The absolute maximum rating values of this product are not allowed to be exceeded at any times. A module should be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in an extreme condition, the module may be permanently destroyed. Note 2: VR Conditions: Zener Diode 20mA Note 3: 90% RH Max. (Max wet temp. is 60℃) Maximum wet-bulb temperature is at 60℃ or less. And No condensation (no drops of dew) Note 4: In case of temperature below 0℃,the response time of liquid crystal (LC) becomes slower and the color of Y panel darker than normal one. TEL: +886-2-2680-7766 PAGE 8/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified 3.2. Typical Operation Conditions GIF Item Symbol Power voltage Values Unit Typ. Max. VDD 3.1 3.3 3.5 V Current for Driver IVDD - 17 25 mA Input logic high voltage VIH 0.8VDD - VDD V Input logic low voltage VIL GND - 0.2VDD V AR Min. Remark VDD=3.2V Note1 Note1: CLK, DE, R0~ R7, G0~ G7, B0~ B7. Item Voltage for LED Backlight Current for LED Backlight LED life time TEC 3.3 Backlight Driving Conditions Symbol Values Unit Remark 31.5 V Note2 20 22 mA - - Hr Min. Typ. Max. VL 25.2 27.9 IL 18 20,000 - Note3 LOG HNO Note 1: The “LED life time” is defined as the module brightness decrease to 50% original brightness that the ambient temperature is 25℃ and IL =20mA. The LED lifetime could be decreased if operating IL is lager than 20 mA. Note 2: The LED Supply Voltage is defined by the number of LED at Ta=25℃ and IL =20mA. Y TEL: +886-2-2680-7766 PAGE 9/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified 3.4. Power Sequence GIF To prevent a latch-up or DC operation of the LCD module, the power on/off sequence should be as the diagram below. AR LOG HNO TEC Symbol Symbol T1 Specification 0≦T1≦10 msec T4 Specification 160 msec ≦T4 T2 0≦T2≦100 msec T5 160 msec ≦T5 T3 0≦T3≦200 msec T6 1 msec ≦T6 Y TEL: +886-2-2680-7766 PAGE 10/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified 3.5. Timing Characteristics GIF 3.5.1. Timing Conditions Parallel DE mode RGB input timing table Parameter Symbol CLK frequency Values Unit Typ. Max. fclk 7 9 12 MHz DEV period time Tv 277 288 400 H DEV display area Tvd DEV blanking Tvb 5 16 128 H DEH period time Th 520 525 800 CLK AR Min. DEH blanking CLK cycle time TEC DEH display area Clock width of high level Clock falling time Data Setup Time Thd H 480 CLK Thb 40 45 320 CLK Tclk 83 110 143 ns Tcwh 40 50 60 % LOG HNO Clock width of low level Clock rising time 272 Tcwl 40 50 60 % trck - 9 ns tfck - 9 ns tdesu 10 - - ns Data Hold Time tdahd 10 - - ns DE Setup Time tdesu 10 - - ns tdehd 10 - - ns DE Hold Time Y TEL: +886-2-2680-7766 PAGE 11/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified 3.5.2. Timing Diagram AR GIF Y LOG HNO TEC TEL: +886-2-2680-7766 PAGE 12/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified GIF 4. Touch Screen Panel Specifications 4.1. Electrical Characteristics Item Values Unit Remark Typ. Max. -1.5 - 1.5 % Analog X and Y directions 300 - 1500 Ω X 100 - 900 Ω Y Insulation resistance 25 - - MΩ DC 25V Voltage - 5 7 V DC Chattering - - 10 ms 100kΩ pull-up Transparency 80 - - % JIS K7105 Linearity AR Min. Terminal Resistance TEC Note: Avoid operating with hard or sharp material such as a ball point pen or a mechanical pencil except a polyacetal pen (tip R0.8mm or less) or a finger. Y LOG HNO TEL: +886-2-2680-7766 PAGE 13/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified 4.2. Mechanical & Reliability Characteristics GIF Item Values Unit Remark - gf Note 1 - characters Note 2 - - touches Note 3 - - H JIS K5400 Typ. Max. Activation force 80 - Durability-surface scratching Write 100,000 - Durability-surface pitting 1,000,000 Surface hardness 3 AR Min. TEC Note 1: Activation force test condition (1) Input DC 5V on X direction, Drop off Polyacetal Stylus (R0.8), until output voltage stabilize ,then get the activation force。 (2) R8.0mm Silicon rubber for finger Activation force test (3) Test point: 9 points LOG HNO Y Note 2: Measurement for surface area. -Scratch 100,000 times straight line on the film with a stylus change every 20,000 times. -Force: 250gf. -Speed: 60mm/sec. -Stylus: R0.8 polyacetal tip. Note 3: Pit 1,000,000 times on the film with a R0.8 silicon rubber. -Force: 250gf. -Speed: 2times/sec. TEL: +886-2-2680-7766 PAGE 14/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified 4.3. Linearity Definition AR GIF LOG HNO TEC Va: maximum voltage in the active area of touch panel Vb: minimum voltage in the active area of touch panel X: random measuring point Vxm: actual voltage of Lx point Vxi: theoretical voltage of Lx point Linearity = [|Vxi-Vxm |/(Va-Vb)]*100% Note: Test area is as follows and operation force is 150gf. Y TEL: +886-2-2680-7766 PAGE 15/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified 4.4. Housing design guide GIF Housing design follow as below 1) Avoid the design that housing overlap and press on the active area of the LCM 2) Give enough gap(over 0.5mm at compressed) between the housing and TSP to protect wrong operating. AR TEC 3) Use a buffer material(Gasket) between the TSP and housing to protect damage and wrong operating 4) Avoid the design that buffer material overlap and press on the inside of TSP view area. Y LOG HNO TEL: +886-2-2680-7766 PAGE 16/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified GIF 5. Optical Specifications Item Condition θL Response time Contrast ratio Unit Remark degree Note 1 Note 7 20 msec Note 3 15 30 msec Note 3 400 500 - - Note 4 0.26 0.31 0.36 - Note 2 Note 5 Note 6 Note7 Typ. Max. Φ=180°(9 o’clock) 60 70 - θR Φ=0°(3 o’clock) 60 70 - θT Φ=90°(12 o’clock) 40 50 - θB Φ=270°(6 o’clock) 60 70 - TON - 10 TOFF - CR WX Normal θ=Φ=0° TEC Color chromaticity Values Min. AR Viewing angle (CR≥10) Symbol WY 0.28 0.33 0.38 - Luminance L 250 400 - cd/m2 Note 6 Luminance uniformity YU 70 75 - % Note 8 2. The test systems refer to Note 2. Y LOG HNO Test Conditions: 1. VDD=3.3V, IL=20mA (Backlight current), the ambient temperature is 25℃. TEL: +886-2-2680-7766 PAGE 17/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified Note 1: Definition of viewing angle range AR GIF TEC Fig. 4-1 Definition of viewing angle Y LOG HNO Note 2: Definition of optical measurement system. The optical characteristics should be measured in dark room. After 30 minutes operation, the optical properties are measured at the center point of the LCD screen. (Response time is measured by Photo detector TOPCON BM-7, other items are measured by BM-5A/Field of view: 1° /Height: 500mm.) Fig. 4-2 Optical measurement system setup TEL: +886-2-2680-7766 PAGE 18/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified AR GIF Note 3: Definition of Response time The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%. TEC Fig. 4-3 Definition of response time Note 4: Definition of contrast ratio Luminance measured when LCD on the "White" state Contrast ratio (CR) = ————————————————————————————— LOG HNO Luminance measured when LCD on the "Black" state Note 5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD. Note 6: All input terminals LCD panel must be ground while measuring the center area of the panel. The LED driving condition is IL=20mA. Note 7: The values shall be measured without Touch Screen Panel. Y TEL: +886-2-2680-7766 PAGE 19/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified GIF Note8: Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer to Fig. 4-4 ).Every measuring point is placed at the center of each measuring area. B min Luminance Uniformity (Yu) = ————— B Max AR L-------Active area length W----- Active area width LOG HNO TEC Fig. 4-4 Definition of measuring points Bmax: The measured maximum luminance of all measurement position. Bmin: The measured minimum luminance of all measurement position. Y TEL: +886-2-2680-7766 PAGE 20/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified Item GIF 6. Reliability Test Remark 240 hrs Note 1, 4 Low Temperature Storage Ta = -30℃ 240hrs Note 1, 4 High Temperature Operation Ts = 70℃ 240hrs Note 2, 4 Low Temperature Operation Ta = -20℃ 240hrs Note 1, 4 Operate at High Temperature and Humidity +60℃, 90%RH 240 hrs Note 5 Thermal Shock -30℃/30 min ~ +80℃/30 min for a total 100 AR High Temperature Storage Test Conditions Ta = 80℃ Note 4 cycles, Start with cold temperature and end with high temperature Mechanical Shock Frequency range:10~55Hz Stroke:1.5mm Sweep:10Hz~55Hz~10Hz 2 hours for each direction of X. Y. Z. (6 hours for total) TEC Vibration Test LOG HNO 100G 6ms,±X, ±Y, ±Z 3 times for each direction Package Vibration Test Random Vibration : 0.015G*G/Hz from 5-200HZ, -6dB/Octave from 200-500HZ 2 hours for each direction of X. Y. Z. (6 hours for total) Package Drop Test Height: 60 cm 1 corner, 3 edges, 6 surfaces Electro Static Discharge ± 2KV, Human Body Mode, 100pF/1500Ω Y Note 1: Ta is the ambient temperature of samples. Note 2: Ts is the temperature of panel’s surface. Note 3: In the standard condition, there shall be no practical problem that may affect the display function. After the reliability test, the product only guarantees operation, but doesn’t guarantee all the cosmetic specification. Note 4: Before cosmetic and function tests, the product must have enough recovery time, at least 2 hours at room temperature. Note 5: Before cosmetic and function tests, the product must have enough recovery time, at least 24 hours at room temperature. TEL: +886-2-2680-7766 PAGE 21/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified GIF 7. General Precautions 7.1. Safety Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches your skin or clothes, wash it off immediately by using soap and water. 7.2. Handling AR 1. The LCD panel is plate glass. Do not subject the panel to mechanical shock or to excessive force on its surface. 2. The polarizer attached to the display is easily damaged. Please handle it carefully to avoid scratch or other damages. 3. To avoid contamination on the display surface, do not touch the module surface with bare hands. 4. Keep a space so that the LCD panels do not touch other components. 5. Put cover board such as acrylic board on the surface of LCD panel to protect panel from damages. 6. Transparent electrodes may be disconnected if you use the LCD panel under environmental conditions where the condensation of dew occurs. 7. Do not leave module in direct sunlight to avoid malfunction of the ICs. TEC 7.3. Static Electricity 1. Be sure to ground module before turning on power or operating module. 2. Do not apply voltage which exceeds the absolute maximum rating value. LOG HNO 7.4. Storage 1. Store the module in a dark room where must keep at 25±10℃ and 65%RH or less. 2. Do not store the module in surroundings containing organic solvent or corrosive gas. 3. Store the module in an anti-electrostatic container or bag. 7.5. Cleaning 1. Do not wipe the polarizer with dry cloth. It might cause scratch. 2. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might permanent damage to the polarizer. Y TEL: +886-2-2680-7766 PAGE 22/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified AR GIF 8. Mechanical Drawing Y LOG HNO TEC TEL: +886-2-2680-7766 PAGE 23/24 FAX.:+886-2-2668-8378 晶 發 科 技 有 限 公 司 GI FAR TECHNOLOGY CO.,LTD Quality Certified No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C. ISO 9001:2008 ISO 14001:2004 Licence No: TA1062-QC-EC Licence No: TA1062-QC-EC Environmentally Certified CONNECT DRAWING AR GIF Y LOG HNO TEC TEL: +886-2-2680-7766 PAGE 24/24 FAX.:+886-2-2668-8378