SZ2140.T

SZ212V4-SZ2147 TECHNICAL DATA DATA SHEET D0123 REV. - SILICON ZENER DIE Features:   Zener Voltage 2.4V - 47V Withstand Large Surge Stresses Maximum Ratings: Characteristics Nominal Power Dissipation Forward Voltage Operating Temperature Range Storage Temperature Range Symbol PD VF TJ Tstg Condition Derate above 25 C @ IF=10mA, Pulse, TJ = 25 C - Max. 500 0.9 -55 to +150 -55 to +150  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  Units mW V C C SZ212V4-SZ2147 TECHNICAL DATA DATA SHEET D0123 REV. - Electrical Characteristics @ TJ=25 C: Zener voltage Device Nom. VZ ① @ IZT Zener Impedence Max. Max. ZZT @ IZT ZZK @ IZK Leakage Current @ IZK Max. IR @ VR Volts mA Ω Ω mA uA Volts SZ212V4 SZ212V5 SZ212V7 SZ213V0 SZ213V3 SZ213V6 SZ213V9 SZ214V3 SZ214V7 SZ215V1 SZ215V6 SZ216V2 SZ216V8 SZ217V5 SZ218V2 SZ219V1 SZ2110 SZ2111 SZ2112 SZ2113 2.4 2.5 2.7 3 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 9.5 30 30 30 30 28 24 23 22 19 17 11 7 5 6 8 10 17 22 30 13 1200 1200 1300 1600 1600 1700 1900 2000 1900 1600 1600 1000 750 500 500 600 600 600 600 600 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 100 100 75 50 25 15 10 5 5 5 5 5 3 3 3 3 3 2 1 0.5 1 1 1 1 1 1 1 1 2 2 3 4 5 6 6.5 7 8 8.4 9.1 9.9 SZ2114 14 9 15 600 0.25 0.1 10 SZ2115 15 8.5 16 600 0.25 0.1 11 SZ2116 16 7.8 17 600 0.25 0.1 12 SZ2118 18 7 21 600 0.25 0.1 14 SZ2120 SZ2122 SZ2124 SZ2127 SZ2128 SZ2130 SZ2133 SZ2136 SZ2139 20 22 24 27 28 30 33 36 39 6.2 5.6 5.2 4.6 4.5 4.2 3.8 3.4 3.2 25 29 33 41 44 49 58 70 80 600 600 600 600 600 600 700 700 800 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 15 17 18 21 21 23 25 27 30 SZ2140 40 3.0 100 800 0.25 0.1 31 SZ2147 47 2.7 150 1000 0.25 0.1 36 Note: ①Vz Tolerance is ±5%  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  SZ212V4-SZ2147 TECHNICAL DATA DATA SHEET D0123 REV. Mechanical Dimensions: In mil (mm) B ANODE Bottom side metalization Ag-5kA minimum A Top side metalization AlSiCu -25kA minimum Bottom side is cathode, top side is anode Dimension H =8.21(0.210.025) (It can be customized according to customer requirements) A ANODE H CATHODE A 21  2(0.53  0.05) B 15  2(0.38  0.05) DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations..  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com 