MGV1207R56M-10

MGV High Current Molded SMT Power Inductors MGV1207 Series FEATURES AND APPLICATIONS Laird MGV series high current power inductors improve performance, reliability and power efficiency. A lower profile benefits consumer electronics and telecom design. Products feature extremely low DCR with greater efficiency and enable a large current in a small size. Inductors are of magnetic shielding and molded construction and perform in operating temperatures ranging from -40 C to 125 C including self-heating rise in temperature. FEATURES • • • • Magnetic shielded structure Low DCR and high efficiency Low profile and miniaturization High reliability APPLICATIONS • • • • • • DC-DC Converter and Power Suppliers LCD TV’S and Gaming Console Tablet, Notebooks, Servers and Printers Networking and Data storage GPS, Set-top-box and Base stations Smart meters and Medical instruments PART NUMBER EXPLANATION MGV 1207 Product series code Product size code 4R7 Inductance value code (i.e. 4R7: 4.7 M - 10 Tolerance % (i.e. M: 20%) Standard Catalog P.N Note: Automotive grade parts are also available, a specific P.N will be assigned upon request. Please contact laird local sales for details. ELECTRICAL SPECIFICATIONS • Tolerance: M: ±20% or N: ±30% • Inductance tested at 100KHz, 1.0V • Heat Rated Current (Irms) is defined based on temperature rise approximate 40°C without core loss (ambient temperature 25±5°C) • Saturation Current (Isat) is the DC current at which the inductance drops off approximately 30% from its value without current. (ambient temperature 25±5°C) • Operating temperature range: -40°C~+125°C (including self-heating temperature rise) • Storage temperature range (packaging conditions): -10°C~+40°C and RH 60%(MAX.) Note: Heat Rated Current (Irms) is tested on a typical PCB and apply a constant current in still air. The temperature rise is dependent on the application system condition including PCB PAD pattern, trace width and thickness and adjacent components etc. It’s suggested to verify the temperature rise of the component under the real operation application conditions. Laird Performance Materials Molded SMT Power Inductors www.laird.com MGV1207 Series Rev: A SPECIFICATION 1.MECHANICAL & DIMENSIONS 100 A (UNIT: mm) E B C D L A 13.50±0.50 B 12.60±0.40 C 6.20±0.40 D 4.35±0.50 E 2.30±0.50 L 14.20 ref G 8.00 ref H 5.00 ref REMARK G H 2.PART NUMBER NOMENCLATOR: MGV 1207 A B 100 C A: Product Series. M - 1X D E D: Inductance Tolerance. (M=±20% ,N=±30%) E: "X"=0:Standard catalog part number "X"=1-9:Controlled customized part or different B: Series number, part size performance than std catalog part. And "5-9" is C: Inductance code for automotive grade. 3.EQUIVALENT CIRCUIT: Laird Performance Materials Molded SMT Power Inductors www.laird.com MGV1207 Series Rev: A SPECIFICATION PART NUMBER INDUCTANCE (uH)±20% MGV1207R15M-10 0.15 55 118 0.49 0.60 MGV1207R22M-10 0.22 53 112 0.47 0.60 MGV1207R30M-10 0.30 48 72 0.60 0.72 MGV1207R33M-10 0.33 46 68 0.65 0.80 MGV1207R40M-10 0.40 44 64 0.70 1.00 MGV1207R47M-10 0.47 41 63 0.90 1.20 MGV1207R56M-10 0.56 37 58 1.05 1.20 MGV1207R68M-10 0.68 35 55 1.25 1.50 MGV1207R82M-10 0.82 33 50 1.5 1.90 MGV12071R0M-10 1.00 30 48 1.7 2.30 MGV12071R5M-10 1.50 27 45 2.5 3.0 MGV12071R8M-10 1.80 24 40 3.6 4.0 MGV12072R2M-10 2.20 22 37 3.8 4.2 MGV12073R3M-10 3.30 18 30 5.7 6.8 MGV12074R7M-10 4.70 13.5 28 7.0 8.4 MGV12075R6M-10 5.60 12.5 23 8.5 10.0 MGV12076R8M-10 6.80 11.5 18 9.5 11.5 MGV12078R2M-10 8.20 10.5 16 12.0 15.5 MGV1207100M-10 10.0 10.0 15.5 13.2 16.5 MGV1207150M-10 15.0 9.0 12.5 23.2 28.0 MGV1207220M-10 22.0 9.0 12 32.5 37.0 MGV1207330M-10 33.0 8.0 11 48.0 58.0 MGV1207470M-10 47.0 6.5 9.5 76.0 90.0 Irms(A) Typ. Isat(A) Typ. DCR(mΩ) Typ DCR(mΩ) Max REMARK GENERAL SPECIFICATION: • Inductance tested at 100KHz, 0.25V • Heat Rated Current (Irms) is defined based on temperature rise approximate 40°C without core loss (ambient temperature 25±5°C) • Saturation Current (Isat) is the DC current at which the inductance drops off approximately 30% from its value without current. (ambient temperature 25±5°C) • Operating temperature range: -40°C~+125°C (including self-heating temperature rise) • Storage temperature range (packaging conditions): -10°C~+40°C and RH 60%(MAX.) Laird Performance Materials Molded SMT Power Inductors www.laird.com MGV1207 Series Rev: A SPECIFICATION Characteristics Curve 0.20 40 0.15 30 0.10 20 0.05 10 0.00 0 50 75 100 125 50 0.20 40 0.15 30 0.10 20 0.05 10 0.00 0 0 25 IDC(A) 40 0.30 30 0.20 20 0.10 10 0.00 0 60 80 100 Inductance (uH) 0.40 Temperature Rise (℃) Inductance (uH) 50 40 50 0.40 40 0.30 30 0.20 20 0.10 10 0.00 0 0 20 40 0.30 30 0.20 20 0.10 10 0.00 0 IDC(A) 64 80 Inductance (uH) 0.40 Temperature Rise (℃) Inductance (uH) 50 48 60 80 100 MGV1207R47M-10 0.50 32 40 IDC(A) MGV1207R40M-10 16 125 0.50 IDC(A) 0 100 MGV1207R33M-10 0.50 20 75 IDC(A) MGV1207R30M-10 0 50 Temperature Rise (℃) 25 0.25 0.60 50 0.48 40 0.36 30 0.24 20 0.12 10 0.00 0 0 16 32 48 IDC(A) 64 80 Temperature Rise (℃) 0 Inductance (uH) 50 Temperature Rise (℃) Inductance (uH) 0.25 Temperature Rise (℃) MGV1207R22M-10 MGV1207R15M-10 Laird Performance Materials Molded SMT Power Inductors www.laird.com MGV1207 Series Rev: A SPECIFICATION Characteristics Curve 30 0.40 20 0.20 10 0.00 0 16 32 48 64 80 30 0.40 20 0.20 10 0.00 0 0 12 24 36 48 1.20 40 0.90 30 0.60 20 0.30 10 0 10 20 30 40 50 Inductance (uH) MGV12071R0M-10 0.00 1.50 50 1.20 40 0.90 30 0.60 20 0.30 10 0 0 10 20 30 40 IDC(A) IDC(A) MGV12071R5M-10 MGV12071R8M-10 2.00 50 1.60 40 1.20 30 0.80 20 0.40 10 0.00 0 10 20 30 IDC(A) 40 50 60 0.00 Inductance (uH) Inductance (uH) 0.60 MGV1207R82M-10 50 0 40 IDC(A) 1.50 0 0.80 IDC(A) Temperature Rise (℃) Inductance (uH) 0 50 50 2.50 50 2.00 40 1.50 30 1.00 20 0.50 10 0.00 0 0 10 20 30 IDC(A) 40 50 Temperature Rise (℃) 0.60 1.00 Temperature Rise (℃) 40 Inductance (uH) 0.80 Temperature Rise (℃) 50 Temperature Rise (℃) Inductance (uH) 1.00 Temperature Rise (℃) MGV1207R68M-10 MGV1207R56M-10 Laird Performance Materials Molded SMT Power Inductors www.laird.com MGV1207 Series Rev: A SPECIFICATION Characteristics Curve 50 2.00 40 1.50 30 1.00 20 0.50 10 0.00 0 20 30 40 50 4.00 40 3.00 30 2.00 20 1.00 10 0.00 0 0 IDC(A) 40 6.00 30 4.00 20 2.00 10 0.00 0 18 24 Inductance (uH) 8.00 12 6.40 40 4.80 30 3.20 20 1.60 10 0.00 30 0 0 6 6.00 30 4.00 20 2.00 10 0.00 0 20 25 Inductance (uH) 40 Temperature Rise (℃) Inductance (uH) 8.00 IDC(A) 18 24 30 MGV12078R2M-10 50 15 12 IDC(A) 10.00 10 40 50 MGV12076R8M-10 5 32 8.00 IDC(A) 0 24 MGV12075R6M-10 50 Temperature Rise (℃) Inductance (uH) MGV12074R7M-10 6 16 IDC(A) 10.00 0 8 Temperature Rise (℃) 10 50 10.00 50 8.00 40 6.00 30 4.00 20 2.00 10 0.00 0 0 4 8 12 IDC(A) 16 20 Temperature Rise (℃) 0 5.00 Temperature Rise (℃) 2.50 Inductance (uH) MGV12073R3M-10 Temperature Rise (℃) Inductance (uH) MGV12072R2M-10 Laird Performance Materials Molded SMT Power Inductors www.laird.com MGV1207 Series Rev: A SPECIFICATION Characteristics Curve 50 12.00 40 9.00 30 6.00 20 3.00 10 0.00 0 4 8 12 16 50 16.00 40 12.00 30 8.00 20 4.00 10 0.00 20 0 3.2 IDC(A) 40 15.00 30 10.00 20 5.00 10 6 9 12 15 40.00 40 30.00 30 20.00 20 10.00 10 0.00 0 IDC(A) 9.6 12 Temperature Rise (℃) Inductance (uH) 50 7.2 50 40.00 40 30.00 30 20.00 20 10.00 10 0 0 MGV1207470M-10 4.8 0 50.00 3 6 9 IDC(A) 50.00 2.4 16 0.00 0 IDC(A) 0 Inductance (uH) 20.00 3 12.8 MGV1207330M-10 50 Temperature Rise (℃) Inductance (uH) MGV1207220M-10 0 9.6 IDC(A) 25.00 0.00 6.4 12 15 Temperature Rise (℃) 0 20.00 Temperature Rise (℃) 15.00 Inductance (uH) MGV1207150M-10 Temperature Rise (℃) Inductance (uH) MGV1207100M-10 Laird Performance Materials Molded SMT Power Inductors www.laird.com Recommended Soldering Conditions 1 2 3 4 5 ■ For Lead-Free Application Figure 1 . Re-flow Soldering Within 4 sec Reflow times: 3 times max Figure 2 . Hand Soldering P R E - H E A T IN G S O L D E R IN G NATURAL C O O L IN G 280 TEMPERATURE C 0 230 150 O v e r 1 m in . G r a d u a l C o o lin g W ith in 3 s e c . Hand solder times: 1 time max MGV1207 Series Rev: A Laird Performance Materials Molded SMT Power Inductors www.laird.com MGV1207 Series Rev: A Reliability and Testing Conditions / Pin Type Power Inductors SMD series(Consumer) Item Reference Additional Requirements Operating temperature -55℃~ +125℃(Including self-temperature rise) range Storage temperature and humidity range High Temperature Exposure (Storage) -10℃ to +40℃ , 60% RH Max MIL-STD-202 Method 108 85±2℃, 168+24hours JESD22 Method JA-104 -40℃→+85, transforming interval:20s, 100cycles Operational Life MIL-PRF-2 85±℃, 168+24hours Apply maximum rated voltage and current according part drawing External Visual MIL-STD-883 Method 2009 Inspect device construction, marking and workmanship. Electrical Test not required. JESD22 Method JB-100 Verify physical dimensions to the applicable device detail specification. Note: User(s) and Suppliers spec. Electrical Test not required MIL-STD-202 Method 204 10~55Hz,1.5mm, 2 hours in each 3mutually perpendicular directions (total of 6 hours) Temperature Cycling Physical Dimension Vibration Resistance to Soldering MIL-STD-202 Method 210 Heat 1. Max. 260±5℃,10±1s, 2 times 2.Solder Composition: Sn/3Ag/0.5Cu Solderability J-STD-002 245±5℃, 5±1sec, Solder: Sn/3.0Ag/0.5Cu Electrical Characterization Print Spec Parametrically test per lot and sample size requirements, summary to show Min, Max, Mean and Standard deviation at room as well as Min and Max Operating temperatures AEC-Q200-005 2mm,30±1s Board Flex Terminal Strength(SMD) AEC-Q200-006 10N, 5S, X,Y direct Laird Performance Materials Molded SMT Power Inductors www.laird.com MGV1207 Series Rev: A PACKAGING Reel Dimension A Type A(mm) B(mm) 24.4+2/-0 100 ± 2 D(mm) 13+0.5/-0.2 330 B D C 13'x24 C(mm) Tape Dimension W E F P A0 24.0±0.3 1.75±0.1 11.50±0.1 16.00±0.1 B0 P2 P0 K0 t D0 Az 12.9±0.1 14.10±0.1 2.0±0.1 4.0±0.17.0±0.1 0.35±0.05 1.5Ref. 7.0±0.1 13±0.1 Packaging Quantity P/N MGV1207 Size Bz Chip/Reel Inner Box Outer Box 500pcs 1000pcs 2000pcs - - Peeling Off Force The force peeling off cove tape is 10 to 100 grams in the arrow direction under the following conditions Room Temp (℃) Room Humidity Room atrn (hPa) Teaming Speed 5~35 45~85 860~1060 300 ※Storage Conditions 1. Temperature and humidity conditions: -10-+40℃ and 60% RH. 2. Recommended products should be used within 12 months from the time of manufacturing. 3. The packaging material should be kept where no chlorine or sulfur exists in the air. 4. Allowable stacking condition of Packaging box：max height 1.5m or 5 boxes stacking