BL-HG036D-AV-TRB

BRIGHT LED ELECTRONICS CORP. Specification for Approval ● SAMPLES  ATTACHED AREA  DEVICE NUMBER: BL-HG036D-AV-TRB PAGE DATE 2015.05.04 1 2 3 4 5 1.0 1.0 1.0 1.0 1.0 6 7 CONTENTS 1.0 1.0 Initial Released FOR CUSTOMER’S APPROVAL STAMP OR SIGNATURE APPROVED PURCHASE 佰鴻工業股份有限公司 MANUFACTURE ISSUED QUALITY ENGINEERING APPROVED PREPARED BRIGHT LED ELECTRONICS CORP. 新北市板橋區和平路 19 號 3 樓 3F., No.19, He Ping Road, Ban Qiao Dist., New Taipei City, Taiwan Tel: +886-2-29591090 張 占 任 2015.05.04 2015.05.04 2015.05.04 孝 嚴 旭 穎 BRIGHT LED ELECTRONICS CORP. BL-HG036D-AVTRB ● Features: ●Package Dimensions: 1. Emitted Color : Yellow Green 2. Lens Appearance : Water Clear. Cathode Mark Anode 3. Mono-color type. Cathode 4. 1.6x0.8x0.8mm(0603) standard package. Cathode Anode 5. Suitable for all SMT assembly methods. 6. Compatible with infrared and vapor phase reflow solder process. 7. Compatible with automatic placement equipment. For reflow soldering 8. This product doesn’t contain restriction 0.8(.031) 0.7(.027) 0.8(.031) Substance, comply ROHS standard. ● Applications: 1. 0.8(.031) NOTES: 1.All dimensions are in millimeters (inches). 2.Tolerance is ±0.10mm (0.004”) unless otherwise specified. 3.Specifications are subject to change without notice. Automotive : Dashboards, stop lamps, turn signals. 2. Backlighting : LCDs, Key pads advertising. 3. Status indicators : Comsumer & industrial electronics. 4. General use. ● Absolute Maximum Ratings(Ta=25℃) Parameter Symbol Rating Unit Power Dissipation Pd 50 mW Forward Current IF 20 mA Peak Forward Current ＊1 IFP 100 mA Reverse Voltage VR 5 V Operating Temperature Topr -40℃~85℃ - Storage Temperature Tstg -40℃~85℃ - Soldering Temperature Tsol See Page 6 - ＊1 Condition for IFP is pulse of 1/10 duty and 0.1msec width. Ver.1.0 Page 1 of 7 BRIGHT LED ELECTRONICS CORP. BL-HG036D-AVTRB ● Electrical and optical characteristics(Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Unit Forward Voltage Vf IF=20mA - 2.0 2.6 V Luminous Intensity Iv IF=20mA 3.7 12.0 - mcd Reverse Current IR VR=5V - - 100 µA 568 - nm 576 nm Peak Wave Length λp IF=20mA - Dominant Wave Length λd IF=20mA 566 Spectral Line Half-width Δλ IF=20mA - 30 - nm Viewing Angle 2θ1/2 IF=20mA - 120 - deg ● Typical Electro-Optical Characteristics Curves Fig.2 Forward current derating curve vs. ambient temperature Fig.1 Relative intensity vs. wavelength 50 40 Forward current (mA) Relative radiant intensity 1.0 0.5 30 20 10 0 520 568 0 620 20 Wavelength (nm) 50 100 3.0 Relative Luminous intensity 30 20 (Normalized @20mA) 2.5 40 Forward current (mA) 80 60 Fig.4 Relative luminous intensity vs. ambient temperature Fig.3 Forward current vs. forward voltage 10 0 40 Ambient temperature Ta( C) 2.0 1.5 1.0 0.5 1 2 3 4 0 -40 5 -20 Forward voltage(V) 0 20 40 60 Ambient temperature Ta( C) Fig.5 Relative luminous intensity vs. forward current Fig.6 Radiation diagram 0 2.0 10 20 1.5 Relative radiant intensity Relative luminous intensity (@20mA) 30 1.0 0.5 40 1.0 0.9 50 0.8 60 70 0.7 80 90 0 10 20 30 40 50 0.5 0.3 0.1 0.2 0.4 0.6 Forward current (mA) Ver.1.0 Page 2 of 7 BRIGHT LED ELECTRONICS CORP. BL-HG036D-AVTRB ● Tapping and packaging specifications(Units: mm) Quantity:1000-4000PCS USER DIRECTION OF FEED 13.0±0.5 ANODE 1.04±0.1 1.08±0.1 1.5±0.1 4.0 ± 0.1 2.0±0.05 TRAILER 179±1 13.0± 0.5 1.88±0.1 8.0 ± 0.3 3.5 ± 0.05 1.75 ± 0.1 CATHODE 4.0 ± 0.1 71.0±0.1 END 5.3 ± 0.05 START LEADER 0.3 FIXING TAPE NOTE: 4000 pcs PER REEL ●Package Method:(unit:mm) Vacuum 12 bag/box 4000 pcs/reel 200 Bar Code Label 245 220 220 Aluminum Foil Bag 185 645 6 box/carton 210 470 Ver.1.0 Page 3 of 7 BRIGHT LED ELECTRONICS CORP. BL-HG036D-AVTRB ● Bin Limits I n t e n s i t y B i n L i m i ts ( A t 2 0 m A ) BIN CODE Min. (mcd) Max. (mcd) G 3.7 5.5 H 5.5 8.2 J 8.2 12.3 K 12.3 18.5 To l e r a n c e f o r e a c h B i n l i m i t i s ± 1 5 % . C o l o r B i n L i m i ts ( A t 2 0 m A ) BIN CODE Min. (nm) Max. (nm) 4 566 568 5 568 570 6 570 572 7 572 574 8 574 576 To l e r a n c e f o r e a c h B i n l i m i t i s ± 1 n m . V F B i n L i m i ts ( A t 2 0 m A ) BIN CODE Min.(v) Max.(v) B 1.8 2.0 C 2.0 2.2 D 2.2 2.4 E 2.4 2.6 To l e r a n c e f o r e a c h B i n l i m i t i s ± 0 . 0 5 V ● B IN： x x x VF BIN CODE Color BIN CODE Intensity BIN CODE Ver.1.0 Page 4 of 7 BRIGHT LED ELECTRONICS CORP. BL-HG036D-AVTRB ● Reliability Test Classification Test Item Reference Standard Test Conditions MIL-STD-750D:1026 Ta: Under room temperature Operation Life MIL-STD-883D:1005 Test time:1,000hrs JIS-C-7021 :B-1 IF=Product Recommended IF High Temperature MIL-STD-202F:103B Ta:85±5℃ High Humidity JIS-C-7021 :B-11 RH:90%-95% Endurance Storage Test time:240hrs Test Ta:100±5℃ High MIL-STD-883:1008 Test time:1,000hrs Temperature JIS-C-7021 :B-10 Storage Ta: -40±5℃ Low Temperature JIS-C-7021 :B-11 Test time=1,000hrs Storage MIL-STD-202F:107D Temperature MIL-STD-750D:1051 Ta:-35±5℃~25±5℃~85±5℃~25±5℃ 30min 5min Cycling MIL-STD-883D:1010 30min 5min JIS-C-7021 :A-2 MIL-STD-202F:107D( Ta:-40±5℃ ~+85±5℃ 10min 10 min 1980) Environmental 10cycle MIL-STD-750D:1051( Time: 20min/cycle Thermal Shock Test 95) MIL-STD-883D:1011(1 991) Result 0/32 0/32 0/32 0/32 0/32 0/32 Wetting balance MIL-STD-883:2003 MIL-STD-202F:208D MIL-STD-883D:2003 Ta:230±5℃ Time:5±0.5s 0/32 Solder Resistance MIL-STD-202F:210A MIL-STD-883D:1011 JIS-C-7021 :A-1 Ta:260±10℃ Time:10±1s 0/32 ● Judgment criteria of failure for the reliability Measuring items Forward voltage Reverse current Luminous intensity Note: Symbol VF ( V) IR(uA) Iv ( mcd ) Measuring conditions IF=20mA VR=5V IF=20mA Judgement criteria for failure Initial Level*1.1 Over U*2 Initial Level*0.7 1.U means the upper limit of specified characteristics. 2.Measurment shall be taken between 2 hours and after the test pieces have been returned to normal ambient conditions after completion of each test. Ver.1.0 Page 5 of 7 BRIGHT LED ELECTRONICS CORP. BL-HG036D-AVTRB ●IR-Reflow Soldering 260℃ Max. 10sec.Max. Above255℃ 30sec.Max. 3℃/sec.Max. 6℃/sec.Max. Above 217℃ 60~150sec. Pre-heating 150~200℃ 60~120sec. 1. Avoid any external stress applied to the resin while the LEDs are at high temperature, especially during soldering . 2. Avoid rapid cooling or any excess vibration during temperature ramp-down process 3. Although the soldering condition is recommended above, soldering at the lowest possible temperature is feasible for the LEDs ● IRON Soldering 350℃ Within 3 sec.,One time only. Ver.1.0 Page 6 of 7 BRIGHT LED ELECTRONICS CORP. BL-HG036D-AVTRB ● Notes for designing: Care must be taken to provide the current limiting resistor in the circuit so as to drive the BRIGHT LEDs within the rated figures. Also, caution should be taken not to overload BRIGHT LEDs with instantaneous voltage at the turning ON and OFF of the circuit. When using the pulse drive care must be taken to keep the average current within the rated figures. Also, the circuit should be designed so as be subjected to reverse voltage when turning off the BRIGHT LEDs. ● Storage: In order to avoid the absorption of moisture, it is recommended to solder BRIGHT LEDs as soon as possible after unpacking the sealed envelope. If the envelope is still packed, to store it in the environment as following: (1) Temperature : 5℃-30℃(41℉)Humidity : RH 60﹪Max. (2) After this bag is opened, devices that will be applied to infrared reflow, vapor-phase reflow, or equivalent soldering process must be: a. Completed within 168 hours. b. Stored at less than 30% RH. (3) Devices require baking before mounting, if: (2) a or (2) b is not met. (4) If baking is required, devices must be baked under below conditions: 48 hours at 60℃±3℃. ● Package and Label of Products: (1) Package: Products are packed in one bag of 4000 pcs (one taping reel) and a label is attached on each bag. (2) Label: BRIGHT LED LOGO B Part No. Quantity BIN. Sealing Date x xx xx Year Month xx Day Manufacture Location Ver.1.0 Page 7 of 7