SMBJ5.0A

SMBJ Series CREATEK Microelectronics Power TVS in DO-214AA/SMB Features ■ Glass passivated chip Bidirectional ■ 600W peak pulse power(10/1000us) 1 ■ High accuracy, 5% tolerance ■ Uni and Bidirectional unit 1 ■ Low clamping voltage ■ Low Leakage current 2 2 ■ Very fast response time Mechanical Data Unidirectional ■ Case: DO-214AA/SMB (plastic package). RoHS compliant ■ Molding Compound Flammability Rating: UL 94 V-0 ■ Terminals: High temperature soldering guaranteed: 260 °C/10 sec. at terminals 1 1 2 2 Applications ■ Computers ■ Telecom system ■ Industrial equipments ■ Consumer electronic applications ■ Other VCC bus and I/O interfaces Absolute Maximum Ratings Ratings at 25 °C, ambient temperature unless otherwise specified Parameter Peak pulse power dissipation with a 10/1000us waveform (1) Maximum peak reverse pulse current a 10/1000us waveform Peak forward surge current 8.3ms single half sine-wave (1) (2 ) Operating junction and storage temperature range Symbol Value Unit PPP 600 W I PP See Next Table A I FSM 100 A TJ, TSTG -55 to +150 ℃ Notes: 1.Non-repetitive current pulse,per Fi g.5 and detated above TA=25°C per Fig.1 2.Measured on 8.3ms single half sine-wave,or equivalent square wave,duty cycle=4 pulses per minute maximum Rev. 1.0, 23-May-2012 www.crea-tek.com 1 SMBJ Series CREATEK Microelectronics Electrical Characteristics (TA = 25 °C unless otherwise specified) Part Number SMBJ5.0A Direction Uni-Dir Maximum Working Voltage VRWM (V) Maximum Reverse Current@VRWM IR max(uA) VBR min(V) VBR max(V) 5.0 800 6.4 7.00 IT(mA) Peak Surge Current IPP (A) Maximum Clamping Voltage@IPP VC (V) 10 65.22 9.2 Breakdown Voltage@IT SMBJ5.0CA Bi-Dir 5.0 1600 6.4 7.00 10 65.22 9.2 SMBJ6.0A Uni-Dir 6.0 800 6.7 7.37 10 58.25 10.3 SMBJ6.0CA Bi-Dir 6.0 1600 6.7 7.37 10 58.25 10.3 SMBJ6.5A Uni-Dir 6.5 500 7.2 7.98 10 53.57 11.2 SMBJ6.5CA Bi-Dir 6.5 1000 7.2 7.98 10 53.57 11.2 SMBJ7.0A Uni-Dir 7.0 200 7.8 8.60 10 50.00 12.0 SMBJ7.0CA Bi-Dir 7.0 400 7.8 8.60 10 50.00 12.0 SMBJ7.5A Uni-Dir 7.5 100 8.3 9.21 1 46.51 12.9 SMBJ7.5CA Bi-Dir 7.5 200 8.3 9.21 1 46.51 12.9 SMBJ8.0A Uni-Dir 8.0 50 8.9 9.83 1 44.12 13.6 SMBJ8.0CA Bi-Dir 8.0 100 8.9 9.83 1 44.12 13.6 SMBJ8.5A Uni-Dir 8.5 10 9.4 10.40 1 41.67 14.4 SMBJ8.5CA Bi-Dir 8.5 20 9.4 10.40 1 41.67 14.4 SMBJ9.0A Uni-Dir 9.0 5 10.0 11.10 1 38.96 15.4 SMBJ9.0CA Bi-Dir 9.0 10 10.0 11.10 1 38.96 15.4 SMBJ10A Uni-Dir 10.0 5 11.1 12.30 1 35.29 17.0 SMBJ10CA Bi-Dir 10.0 10 11.1 12.30 1 35.29 17.0 SMBJ11A Uni-Dir 11.0 1 12.2 13.50 1 32.97 18.2 SMBJ11CA Bi-Dir 11.0 1 12.2 13.50 1 32.97 18.2 SMBJ12A Uni-Dir 12.0 1 13.3 14.70 1 30.15 19.9 SMBJ12CA Bi-Dir 12.0 1 13.3 14.70 1 30.15 19.9 SMBJ13A Uni-Dir 13.0 1 14.4 15.90 1 27.91 21.5 SMBJ13CA Bi-Dir 13.0 1 14.4 15.90 1 27.91 21.5 SMBJ14A Uni-Dir 14.0 1 15.6 17.20 1 25.86 23.2 SMBJ14CA Bi-Dir 14.0 1 15.6 17.20 1 25.86 23.2 SMBJ15A Uni-Dir 15.0 1 16.7 18.50 1 24.59 24.4 SMBJ15CA Bi-Dir 15.0 1 16.7 18.50 1 24.59 24.4 SMBJ16A Uni-Dir 16.0 1 17.8 19.70 1 23.08 26.0 SMBJ16CA Bi-Dir 16.0 1 17.8 19.70 1 23.08 26.0 SMBJ17A Uni-Dir 17.0 1 18.9 20.90 1 21.74 27.6 SMBJ17CA Bi-Dir 17.0 1 18.9 20.90 1 21.74 27.6 SMBJ18A Uni-Dir 18.0 1 20.0 22.10 1 20.55 29.2 SMBJ18CA Bi-Dir 18.0 1 20.0 22.10 1 20.55 29.2 SMBJ19A Uni-Dir 19.0 1 21.1 23.30 1 19.49 30.8 SMBJ19CA Bi-Dir 19.0 1 21.1 23.30 1 19.49 30.8 SMBJ20A Uni-Dir 20.0 1 22.2 24.50 1 18.52 32.4 SMBJ20CA Bi-Dir 20.0 1 22.2 24.50 1 18.52 32.4 Rev. 1.0, 23-May-2012 www.crea-tek.com 2 SMBJ Series CREATEK Microelectronics Part Number Direction Maximum Working Voltage VRWM (V) Maximum Reverse Current@VRWM IR max(uA) VBR min(V) VBR max(V) IT(mA) Peak Surge Current IPP (A) Maximum Clamping Voltage@IPP VC (V) Breakdown Voltage@IT SMBJ22A Uni-Dir 22.0 1 24.4 26.90 1 16.90 35.5 SMBJ22CA Bi-Dir 22.0 1 24.4 26.90 1 16.90 35.5 SMBJ24A Uni-Dir 24.0 1 26.7 29.50 1 15.42 38.9 SMBJ24CA Bi-Dir 24.0 1 26.7 29.50 1 15.42 38.9 SMBJ26A Uni-Dir 26.0 1 28.9 31.90 1 14.25 42.1 SMBJ26CA Bi-Dir 26.0 1 28.9 31.90 1 14.25 42.1 SMBJ28A Uni-Dir 28.0 1 31.1 34.40 1 13.22 45.4 SMBJ28CA Bi-Dir 28.0 1 31.1 34.40 1 13.22 45.4 SMBJ30A Uni-Dir 30.0 1 33.3 36.80 1 12.40 48.4 SMBJ30CA Bi-Dir 30.0 1 33.3 36.80 1 12.40 48.4 SMBJ33A Uni-Dir 33.0 1 36.7 40.60 1 11.26 53.3 SMBJ33CA Bi-Dir 33.0 1 36.7 40.60 1 11.26 53.3 SMBJ36A Uni-Dir 36.0 1 40.0 44.20 1 10.33 58.1 SMBJ36CA Bi-Dir 36.0 1 40.0 44.20 1 10.33 58.1 SMBJ40A Uni-Dir 40.0 1 44.4 49.10 1 9.30 64.5 SMBJ40CA Bi-Dir 40.0 1 44.4 49.10 1 9.30 64.5 SMBJ43A Uni-Dir 43.0 1 47.8 52.80 1 8.65 69.4 SMBJ43CA Bi-Dir 43.0 1 47.8 52.80 1 8.65 69.4 SMBJ45A Uni-Dir 45.0 1 50.0 55.30 1 8.25 72.7 SMBJ45CA Bi-Dir 45.0 1 50.0 55.30 1 8.25 72.7 SMBJ48A Uni-Dir 48.0 1 53.3 58.90 1 7.75 77.4 SMBJ48CA Bi-Dir 48.0 1 53.3 58.90 1 7.75 77.4 SMBJ51A Uni-Dir 51.0 1 56.7 62.70 1 7.28 82.4 SMBJ51CA Bi-Dir 51.0 1 56.7 62.70 1 7.28 82.4 SMBJ54A Uni-Dir 54.0 1 60.0 66.30 1 6.89 87.1 SMBJ54CA Bi-Dir 54.0 1 60.0 66.30 1 6.89 87.1 SMBJ58A Uni-Dir 58.0 1 64.4 71.20 1 6.41 93.6 SMBJ58CA Bi-Dir 58.0 1 64.4 71.20 1 6.41 93.6 SMBJ60A Uni-Dir 60.0 1 66.7 73.70 1 6.20 96.8 SMBJ60CA Bi-Dir 60.0 1 66.7 73.70 1 6.20 96.8 SMBJ64A Uni-Dir 64.0 1 71.1 78.60 1 5.83 103.0 SMBJ64CA Bi-Dir 64.0 1 71.1 78.60 1 5.83 103.0 SMBJ70A Uni-Dir 70.0 1 77.8 86.00 1 5.31 113.0 SMBJ70CA Bi-Dir 70.0 1 77.8 86.00 1 5.31 113.0 SMBJ75A Uni-Dir 75.0 1 83.3 92.10 1 4.96 121.0 SMBJ75CA Bi-Dir 75.0 1 83.3 92.10 1 4.96 121.0 SMBJ78A Uni-Dir 78.0 1 86.7 95.80 1 4.76 126.0 SMBJ78CA Bi-Dir 78.0 1 86.7 95.80 1 4.76 126.0 Rev. 1.0, 23-May-2012 www.crea-tek.com 3 SMBJ Series CREATEK Microelectronics Part Number SMBJ80A Direction Uni-Dir Maximum Working Voltage VRWM (V) Maximum Reverse Current@VRWM IR max(uA) VBR min(V) VBR max(V) 80.0 1 88.8 97.60 IT(mA) Peak Surge Current IPP (A) Maximum Clamping Voltage@IPP VC (V) 1 4.63 129.6 Breakdown Voltage@IT SMBJ80CA Bi-Dir 80.0 1 88.8 97.60 1 4.63 129.6 SMBJ85A Uni-Dir 85.0 1 94.4 104.00 1 4.38 137.0 SMBJ85CA Bi-Dir 85.0 1 94.4 104.00 1 4.38 137.0 SMBJ90A Uni-Dir 90.0 1 100.0 111.00 1 4.11 146.0 SMBJ90CA Bi-Dir 90.0 1 100.0 111.00 1 4.11 146.0 SMBJ100A Uni-Dir 100.0 1 111.0 123.00 1 3.70 162.0 SMBJ100CA Bi-Dir 100.0 1 111.0 123.00 1 3.70 162.0 SMBJ110A Uni-Dir 110.0 1 122.0 135.00 1 3.39 177.0 SMBJ110CA Bi-Dir 110.0 1 122.0 135.00 1 3.39 177.0 SMBJ120A Uni-Dir 120.0 1 133.0 147.00 1 3.11 193.0 SMBJ120CA Bi-Dir 120.0 1 133.0 147.00 1 3.11 193.0 SMBJ130A Uni-Dir 130.0 1 144.0 159.00 1 2.87 209.0 SMBJ130CA Bi-Dir 130.0 1 144.0 159.00 1 2.87 209.0 SMBJ140A Uni-Dir 140.0 1 155.0 171.00 1 2.65 226.8 SMBJ140CA Bi-Dir 140.0 1 155.0 171.00 1 2.65 226.8 SMBJ150A Uni-Dir 150.0 1 167.0 185.00 1 2.47 243.0 SMBJ150CA Bi-Dir 150.0 1 167.0 185.00 1 2.47 243.0 SMBJ160A Uni-Dir 160.0 1 178.0 197.00 1 2.32 259.0 SMBJ160CA Bi-Dir 160.0 1 178.0 197.00 1 2.32 259.0 SMBJ170A Uni-Dir 170.0 1 189.0 209.00 1 2.18 275.0 SMBJ170CA Bi-Dir 170.0 1 189.0 209.00 1 2.18 275.0 291.6 SMBJ180A Uni-Dir 180.0 1 200.0 220.00 1 2.06 SMBJ180CA Bi-Dir 180.0 1 200.0 220.00 1 2.06 291.6 SMBJ190A Uni-Dir 190.0 1 211.0 232.00 1 1.95 307.8 SMBJ190CA Bi-Dir 190.0 1 211.0 232.00 1 1.95 307.8 SMBJ200A Uni-Dir 200.0 1 224.0 247.00 1 1.85 324.0 SMBJ200CA Bi-Dir 200.0 1 224.0 247.00 1 1.85 324.0 SMBJ220A Uni-Dir 220.0 1 246.0 272.00 1 1.69 356.0 SMBJ220CA Bi-Dir 220.0 1 246.0 272.00 1 1.69 356.0 SMBJ250A Uni-Dir 250.0 1 279.0 309.00 1 1.48 405.0 SMBJ250CA Bi-Dir 250.0 1 279.0 309.00 1 1.48 405.0 SMBJ300A Uni-Dir 300.0 1 335.0 371.00 1 1.23 486.0 SMBJ300CA Bi-Dir 300.0 1 335.0 371.00 1 1.23 486.0 SMBJ350A Uni-Dir 350.0 1 391.0 432.00 1 1.06 567.0 SMBJ350CA Bi-Dir 350.0 1 391.0 432.00 1 1.06 567.0 SMBJ400A Uni-Dir 400.0 1 447.0 494.00 1 0.93 648.0 SMBJ400CA Bi-Dir 400.0 1 447.0 494.00 1 0.93 648.0 SMBJ440A Uni-Dir 440.0 1 492.0 543.00 1 0.84 713.0 SMBJ440CA Bi-Dir 440.0 1 492.0 543.00 1 0.84 713.0 Rev. 1.0, 23-May-2012 www.crea-tek.com 4 SMBJ Series CREATEK Microelectronics Typical Characteristics (Tamb = 25 °C unless otherwise specified) Fig. 2 - Maximum Non-Repetitive Surge Current 100 75 50 25 0 25 50 75 100 125 150 175 22 60 40 20 0 0 8.3 ms Single Half Sine-Wave 100 80 200 1 10 Fig. 3 - Steady State Power Derating Curve Fig. 4 - Peak Pulse Power Rating Curve 100 5.0 Peak Power (kW) 4.0 3.0 2.0 0.1 30 10000 0.22 10 1 1.0 0.0 0 25 50 75 100 125 150 175 0.1 200 00.1 1 1 10 Fig. 5 - Pulse Waveform ˈ 1000 0.2 100 0.5 = Ipp 76 Half Value 1 2 50 1.5 33 10/1000 ȝsec. Waveform 2 defined 23 as by R.E.A. 3 13 4 10 50 td 0 TJ = 25 ƱC Pulse Width (td) is defined as the point where the peak current 0 to 50 %0of Ipp decays Junction Capacitance,CJ (pF) 100 1 2 Time , (ms) Rev. 1.0, 23-May-2012 10000 3 4 ˇˈ˃ ˇ˃˃˃ ˊ˃ ˈ ˇˈ˃ ˅ˋ˃˃ ˇ˃ ˈ ˇˈ˃ ˅ˈ˃˃ ˊ ˈ ˇˈ˃ ˅˃˃˃ ˄˃ Bi-directional @zero bias Uni-directional @zero bias Uni-directional @VRWM 100 10 TJ=25 °C f=1.0MHz 1 0 1000 Fig. 6 - Typical Junction Capacitance 10000 Tr=10ȝs Peak Value (Ipp) 100 Pulse Width ,td (ȝs) Lead Temperature , TL (к) Peak Pulse Current , (% ) 100 Number of Cycles at 60 Hz Ambient Temperature ,TA (ɗ) Steady State Power Dissipation, (W) 100TJ = TJ max. 1 Peak Forward Surge Current, (A) Peak Pulse Derating in Percentage of Peak Power or Current, (%) Fig. 1 - Pulse Derating Curve 100 1 10 Bi-directional @VRWM 100 1000 Reverse Breakdown Voltage,VBR (V) www.crea-tek.com 5 SMBJ Series CREATEK Microelectronics Package Dimensions C A Symbol A B C D E F G H B H D F E Dimensions in millimeters Min Max 1.93 2.08 4.25 4.75 3.48 3.73 1.99 2.61 0.90 1.41 0.10 0.20 5.26 5.46 0.15 0.31 G Ordering information Order code Package Packaging option Base quantity Packaging specification SMBJ Series DO-214AA/SMB Tape and reel 3000pcs / reel EIA STD RS-481 Revision history Date Revision 23-May-2012 1.0 Rev. 1.0, 23-May-2012 Changes Initial release www.crea-tek.com 6 SMBJ Series CREATEK Microelectronics CAUTION / WARNING Information in this document is believed to be accurate and reliable. However, CREATEK does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Users should independently evaluate the suitability of and test each product selected for their own applications, and CREATEK assumes no liability whatsoever relating to the choice, selection or use of the CREATEK products and services described herein. CREATEK reserves the right to change or update, without notice, any information contained in this publication; to change, without notice, the design, construction, processing, or specification of any product; and to discontinue or limit production or distribution of any product. Information in this document supersedes and replaces all information previously supplied. Products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an CREATEK product can reasonably be expected to result in personal injury, death or severe property or environmental damage. CREATEK accepts no liability for inclusion and/or use of CREATEK products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Resale of CREATEK products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by CREATEK for the CREATEK product or service described herein and shall not create or extend in any manner whatsoever, any liability of CREATEK. CREATEK expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. CREATEK only obligations are those in the CREATEK Standard Terms and Conditions of Sale and in no case will CREATEK be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products. Specifications are subject to change without notice © Copyright 2009,CREATEK Microelectronics t ® is a registered trademark of CREATEK Microelectronics All rights reserved Rev. 1.0, 23-May-2012 www.crea-tek.com 7