RELIABLE STORAGE &
EMBEDDED IOT SOLUTIONS
INDUSTRY • AUTOMOTIVE • SECURITY
NETWORKING & COMMUNICATION • IOT
STORE. SECURE. TRUST.
Data is the fuel of the future and is driving global growth and
change. Swissbit takes care of data by storing and protecting
data reliably. As a leader in industrial storage and embedded IoT
(Internet of Things) solutions, Swissbit drives the development
of demanding industrial and IoT applications to make our lives
easier, safer, and more comfortable.
More than 5,000 customers around the world including Fortune 500
companies and the world‘s leading OEMs already rely on Swissbit for
their critical data storage and security requirements. With over 25 years
of experience in the development of removable and embedded storage
and embedded IoT solutions for the most demanding markets, coupled
with a trusted global distribution and support network, Swissbit is
firmly established as a global innovation leader in storage and security
products for high-reliability solutions.
MADE IN GERMANY
New technological trends are driving the demand for highly integrated solutions and advanced packaging
technologies. Digitization will increase the demand for industrial memory products for industrial, telecommunications, automotive (e.g. autonomous driving), medical, and fiscal applications. In addition,
the growing connectivity of devices in the Internet of Things means that the demands on the protection
of data and devices, and thus the demand for smart security products, will increase massively. Swissbit
has prepared for this with new state-of-the-art production capacities at the new plant in Berlin, Germany.
Development
Conception
Qualification
Verification
Supply Chain
Service
Production & Test
CORPORATE PROFILE
Established
1992 – 2000 as SIEMENS AG
Swissbit AG was formed in 2001 through
a management buyout
Financial Strength
Privately held company, equity ratio > 60%
CAGR 2009-2018
Continuous positive annual growth
2
Headquarters
Swissbit AG: Bronschhofen (St. Gallen,
Lake Constance area)
Subsidiaries
Germany, USA, Japan, Taiwan
R & D sites
Switzerland, Germany and USA
Production Site
Berlin, Germany
CONTENT
OUR PRODUCTS AND TECHNOLOGIES
NAND FLASH PRODUCTS
SECURITY PRODUCTS
SYSTEM IN PACKAGE
NAND flash products
20
Security products
42
Advanced packaging,
PCIe SSD modules
22
Security editions
44
assembly & test solutions
2.5“ SATA SSDs
24
SATA modules
26
SATA modules 3D NAND
29
CFAST TM Cards
30
CompactFlashTM
32
SD Memory Cards
34
microSD Cards
36
USB products
38
Managed NAND
40
46
3
APPLICATIONS
INDUSTRY
EMBEDDED PRODUCTS
Swissbit's embedded memory and
storage solutions are the perfect fit for
demanding embedded applications.
They offer the highest reliability and
quality. Swissbit's strategic cooperation
with suppliers allows for long-term
availability of products. To guarantee
4
high-quality standards, each product
undergoes thorough functional testing
before being released for shipment.
The broad portfolio with different NAND
technologies and industry-dedicated
features guarantee the right solution for
each embedded use case.
Memory and non-volatile storage solutions
for embedded applications must provide
reliable operation even in the most extreme
conditions: temperature, shock, and vibration.
As such, both the qualification cycle and the
support life cycle needed for these products
by far exceed those of devices designed for
typical consumer applications.
TYPICAL APPLICATIONS:
• Industrial automation
• Energy distribution
• Energy consumption
• Smart grid
• Infotainment
• Healthcare
• Transportation
• Aerospace and defense
APPLICATIONS
5
APPLICATIONS
IOT
IOT PRODUCTS
Memory and non-volatile storage solutions for edge computing must work
uninterrupted and with a long service
interval. Edge computing systems experience wide temperature ranges, shock,
and vibration.
Remotely installed sensors, actuators
and communication channels need to
have local storage for pre-processing
of big data, temporary storage for
6
optimized network usage, and format
conversion. Stored data as well as
Internet of Things (IoT) devices must
be protected against manipulation or
theft. The storage product must provide
a high bandwidth for small block write
operations.
The life time status of the storage device
must be controllable by local maintenance
routines.
Swissbit provides the perfect rugged and reliable
small form factor storage products for edge
computing systems.
The Swissbit SD, microSD, e.MMC, and USB products
offer the right storage capacity, longevity, and
operation temperature range for remotely installed systems. Swissbit security products can
be used as a TPM-like, hardware-based root of
trust to give IoT devices a unique ID and protect
access, boot code, communication, and stored
data.
TYPICAL APPLICATIONS:
• Industrial connectivity
• Manufacturing / IIoT
• Remote sensors
• Remote actuators
• Surveillance
• Point of Sale (POS)
• Smart Infrastructure
• Mobility
APPLICATIONS
7
APPLICATIONS
NETWORKING &
COMMUNICATION
NETCOM PRODUCTS
Swissbit supports the demanding field
of NetCom applications with products
that withstand a wide range of frequent
temperature changes and operate be
tween -40°C and +85°C. It is mandatory
that products perform for an extended
life time in the field without the need
for replacement or service. Swissbit's
durabit™ range of SSDs fulfill this requirement.
8
For system boot purposes, a common
frequently utilized device is the embedded USB module. With the U-4x and
U-5x family, Swissbit offers a broad
range of capacities and interface modes.
Data care management with retention
optimization maintains the boot image
data over the complete service life and
guarantees a safe and fast restart of the
NetCom system.
The latest technologies and life changing
developments rely on the Internet. The
Internet of Things (IoT) cannot be realized
without a strong network of communication
channels.
Transmitting data to remote areas of the
world is challenging and involves a high cost.
Transceivers, routers and bridges that require
uninterrupted, autonomous 24/7 operation
are often under extreme environmental
conditions and may be installed in areas that
are difficult to service.
TYPICAL APPLICATIONS:
• ATCA Blade
• Cable modem
• Content and video delivery
• Digital Subscriber Line
access multiplexer
• Enterprise Media Gateway
• Switches and routers
• Optical network
• Radar / Sonar
• Radio network controller
• Security infrastructure
• Tetra Base Station
• Wireless Base Station
APPLICATIONS
9
APPLICATIONS
AUTOMOTIVE
AUTOMOTIVE PRODUCTS
All components used in automotive
applications need to operate within a
wide temperature range and withstand
sudden power loss as well as shock and
vibration. Additionally, very low failure
rates are essential, because replacement
of malfunctioning parts can incur high
costs. Swissbit is the only independent
10
embedded memory and storage manufacturer with an IATF 16949 certified fab.
Our new 3D NAND based S-50 SD memory
card lineup caters to the demands of
automotive applications, offering the
highest reliability and quality at competitive prices.
The increasing varieties of infotainment and
dashboard applications in cars today require
significantly higher storage capacities than
before. For autonomous driving, the demand
for fast and high capacity storage drives the
development of embedded products. Swissbit
participates in this trend with newly developed,
dedicated storage solutions.
TYPICAL APPLICATIONS:
• Entertainment systems
• Navigation systems
• Head unit / dashboard
• Black box / crash recorder
• Instrument cluster
• Dash cam
APPLICATIONS
11
APPLICATIONS
SECURITY
SECURITY PRODUCTS
Governments, enterprises, banks, and
industry demand high-end security to
protect their assets. The growing number
of IoT devices need to be secured against
interception of data transfer and hacking of control systems.
But even trusted security solutions like
Management Engines, Smartcard chips,
or secured CPUs prove to be imperfect.
An upgradeable security solution based
on exchangeable hardware cryptography
and standard interfaces is the solution
12
to update systems to a constant stateof-the-art level of security. Swissbit's
secure memory solutions offer smart
card functionality coupled with NAND
flash storage. Systems with SD card,
microSD card, or USB interface can easily
be updated to the protection level of
a smart card chip. For efficient data protection of stored information, Swissbit
offers SSDs as self-encrypted drives (SED)
with TCG OPAL compliance or SD Cards
with AES encryption.
Hardware-based security offers the
highest level of protection and security.
Swissbit's middleware creates a standardized
layer to offer security functionality to the
system without the need to understand the
underlying hardware interfaces. The Swissbit
Security Interface supports all relevant mobile,
portable, embedded, and PC platforms.
TYPICAL APPLICATIONS:
• Surveillance
• Audit trails
• License protection
• Secure update
• Secure voice communication
• Authentication and authorization
• Data encryption and protection
• Point of Sale (POS)
APPLICATIONS
13
PRODUCT FEATURES
ROBUSTNESS FEATURES
DATA FEATURES
SHOCK AND VIBRATION
The design, assembly, and use of
selected materials guarantee
extreme mechanical robustness.
DATA CARE MANAGEMENT
Multiple routines inside the controller
firmware improve data quality and
eliminate degradation effects.
CONFORMAL COATING
A thin polyurethane film protects against
aggressive environmental conditions
such as dust, moisture, or corrosive gas.
LIFE TIME MONITORING (LTM)
The Swissbit Life Time Monitoring feature
enables users to access the memory
device's detailed Life Time Status and
allows remaining life time prediction,
thereby avoiding unexpected data loss.
LONGEVITY
These products offer the lowest TCO
in demanding applications with high
requalification cost.
PERFORMANCE FEATURES
READ-ONLY OPTIMIZED
For cases where content is written to
the NAND flash once, the firmware can
be optimized to guarantee the highest
possible data retention and read disturb.
HIGH PERFORMANCE
Optimized for high sequential data rates
and IOPS by use of SLC technology.
TRIM SUPPORT
Expired data can be released and deleted
in the Flash which reduces garbage collection
and increases the life time.
WAF REDUCTION
The WAF (write amplification factor)
for MLC-based products is reduced by
combining a page-based firmware
block management with a powerful card
architecture and configuration settings.
TEMPERATURE FEATURES
WIDE TEMPERATURE SUPPORT
The products are designed and approved
for reliable operation over a wide temperature range.
TEMPERATURE SENSOR
The sensor allows the host hardware or
software to monitor the storage device
temperature.
14
SECURE ERASE (SANITIZE / PURGE) /
FAST ERASE
This feature uses an uninterruptible
sequence of data erase commands.
ZONE PROTECTION
The device allows the configuration of
multiple zones with either no protection,
write protection, or access protected
settings.
ELECTRONIC FEATURES
SECURITY FEATURES
ESD AND EMI SAFE
The product designs are in line with
the latest regulations for electrostatic
discharge and electromagnetic
interference.
TRUE HARDWARE RNG
True random numbers are generated
inside the secure element to prevent
brute force attacks.
LOW POWER CONSUMPTION
Electronic devices with lower power
consumption decrease energy cost,
prolong battery life, and reduce heat
generation in the device, and hence
require less cooling.
WEAR LEVELING
Sophisticated wear leveling and bad
block management ensure that flash
cells are sparingly and equally used to
prolong the device's life.
IN FIELD FW UPDATE
The storage product can be upgraded with
new firmware in the field. The upgrade
process is protected against power loss.
POWER FAIL PROTECTION & RECOVERY
During an unintentional shutdown,
firmware routines and intelligent hardware architecture ensure that no corruption of user or system data will occur.
DIGITAL SIGNATURE
Digital signatures are very popular and
indispensable to protect against data or
code manipulation.
HARDWARE BASED DATA ENCRYPTION
Hardware based security is key
when it comes to replaceability,
simple workflows, and trusted
runtime environments.
MOBILE BANKING & EPURSE
Strong authentication and offline
security for mobile banking and
payment.
DEVICE PROTECTION BY DUAL FACTOR
AUTHENTICATION
The user needs to have the card and
know the PIN.
SECURE VOICE
The product is optimal for fast,
encrypted, and user-friendly
secure voice solutions.
ELLIPTIC CURVE CRYPTOGRAPHY SUPPORT
Elliptic curves are faster and more
efficient than RSA cryptography.
DATA PROTECTION & ENCRYPTION
The card offers a data safe function with
strong AES encryption and PIN access
protection.
SECURE LOGGING
Any data can be stored securely in
write-once mode, queue mode, or
random-access mode.
SECURE CD-ROM
Important data can be modified
only after PIN authentication.
PRODUCT FEATURES
15
PRESALES
SALES
AFTERSALES
YOUR FUTURE WITH OUR SOLUTION
YOUR TRUSTWORTHY PARTNER
LOCAL SUPPORT – GLOBALLY
Our experienced Business Development
and Field Application Engineering teams in
Europe, North America, and Asia support
you in the selection and qualification of
the most suitable memory and storage
solution for your applications.
This includes TCO analysis with the Swissbit
Life Time Monitor, hardware or firmware
customization, middleware development,
the provision of evaluation units and
ultimately a joint qualification.
We understand the importance of providing local support in your language and
time zone. For that reason, Swissbit has
established sales offices in all major regions
plus a strong network of partners that
reaches even farther. Our experienced
sales teams manage forecasting and
order fulfillment, or can engage thirdparty logistics or distribution networks if
required.
Our engagement stretches far beyond the
delivery of our products. Through sophisticated life cycle management, we can
ensure maximum longevity and smooth
transitions in the event of product changes.
And while we are proud of our best-inclass quality, we are still prepared to
provide fast and solution-oriented RMA
support at any time, including 4D and 8D
reports whenever required.
16
SWISSBIT'S
UNIQUE
360°
CUSTOMER
SERVICE
PRE
SALES
CUSTOMER
AFTER
SALES
SALES
CUSTOMER SERVICE
17
WHAT IS THE
CUSTOMER
BENEFIT?
HIGHEST ROBUSTNESS
WHAT MATTERS WHEN
STORAGE NEEDS TO BE TOUGH
We assure that Swissbit storage products deliver the best
endurance at the maximum performance and for the lowest
cost of ownership in our customers‘ applications. We combine
reliable design and zero-defect manufacturing with worldclass product qualification for the highest quality and long
service life: key factors that ensure the highest productivity
and efficiency in the tough applications that Swissbit serves.
18
01
03
05
Availability of a full portfolio of
storage and security products with
best fit to the customer use case
02
Fast and easy qualification
of a mature product without
risk of undetected issues
04
Reduced cost
of maintenance
and RMA handling
Long service life
without need of frequent
requalification
Fast and effective
application engineering
support
SAFE PROCESSES
THROUGH RELIABLE
DEVELOPMENT
SAVINGS THROUGH
LONG SERVICE LIFE
MAXIMUM STABILITY
· Product design and development with
focus on industrial, NetCom, and
automotive market requirements
· Optimized for demanding applications
· Stringent hardware and firmware
qualification verify design effort
· Swissbit products use components
with long-term availability
· The service life of Swissbit products
exceed industry practice by far
· Swissbit commits to locked BOM and
PCN process
· Improved signal integrity
· In-house COB process for maximum
mechanical robustness
· PCB design and soldering process
withstand high thermal stress
· True industrial temperature support
· Firmware for highest endurance
CUSTOMER BENEFIT
19
NAND FLASH
PRODUCTS
SWISSBIT'S EMBEDDED STORAGE SOLUTIONS
Our sophisticated flash handling algorithms optimize
the performance and life of the 2D and 3D NAND flash
used in our products.
OEMs of various industries require a
variety of memory and storage solutions.
In contrast to typical consumer devices,
Swissbit's embedded memory and
storage solutions are designed for the
highest reliability under extreme environmental conditions. They come with a
large feature set tailored to the demands
of the industrial, automotive, and NetCom
markets and with our commitment to
long-term availability. Swissbit's embed-
Chip Capacity
Cost per Bit
Reliability & Endurance
Industrial Temperature
Write Performance
ECC Requirement
Data Retention
Longevity
20
ded memory and storage solutions
portfolio covers all relevant interfaces
and form factors including SD and microSD
memory cards, CompactFlash™ and
CFast™ cards, 2.5" SATA SSDs, SLIM SATA
and mSATA SSDs, M.2 in SATA and PCIe
NVMe, USB Flash Drives (UFD), and modules.
Our sophisticated flash handling algorithms
optimize the performance and life of the
SLC, MLC and 3D NAND flash used in our
products.
SLC
everbitTM
pSLC
durabitTM
MLC
3D pSLC
3D TLC
3D QLC
•
•••••
••••
••••
••••
•
••••
••••
••
••••
••••
•••
••••
••
•••
••
•••
•••
•••
•••
•••
••
•••
••
••
•••
••••
•••
•••
••••
•••
••
••••
••
•••
••
••
••••
•••
••
•••••
•
••
•
•
••••
•
•
••••• maximum; •••• highest; ••• high; •• medium; • low
FLASH LIFE TIME
PREDICTION
The endurance of flash-based products is primarily defined by the
maximum number of program /
erase cycles of the flash components. SLC components normally
allow 100,000 PE cycles per block
while MLC is typically specified as
3,000 PE cycles.
This transparency of NAND component endurance is no longer provided for integrated flash cards with
controllers and firmware. For each
write that the host initiates, the
flash controller has to perform internal management steps and may
need to erase and write multiple
blocks even at the smallest external write transfer size. The ratio
between internal write data volume and the external request size
is called WAF (write amplification
factor) and can vary between one
(theoretical best case) and several
hundred depending on card structure, flash components used, firmware architecture, and user-application write profile.
As explained in the box to the right, the
endurance and performance of a FLASH
product is massively defined by the internal write amplification (WAF).
The way in which customer applications
write to the storage device has a high
impact on the WAF, but is difficult to
calculate analytically. Swissbit supports
a realistic evaluation of the WAF and
the endurance of their SSDs and storage cards with help of the Swissbit Life
Time Monitoring Tool and statistical data
stored in the flash by the firmware.
This tool can read out the real usage
data, such as the number of writes
and erase cycles, the bad block statistic,
and successful ECC correction, and
provides all the data necessary to
extrapolate the life time of the device.
SSD ENDURANCE
Swissbit durabit™ products use architectural improvements such as pagebased FTL, increased overprovisioning,
and DRAM supported flash management
to significantly decrease the WAF for
small writes. This enables unprecedented endurance and write performance
in these critical use cases.
NAND FLASH PRODUCTS
21
PCIe SSD Modules
WAF
Reduction
Data Care
Managed
TRIM
Support
Read-Only
Improved
Wear
Leveling
Power Loss
Protected
Temp.
Sensor
Secure
Erase
Life Time
Monitor
Shock &
Vibration
especially with the common 4-lane
configuration. The Swissbit N-10m2 and
N-12m2 PCIe Gen3 / NVMe 1.2 modules
only use 2 PCIe lanes and reduce the
power consumption without sacrificing
performance. Even if only operated with
one PCIe lane, the performance still
exceeds the SATA limits. Swissbit addresses
applications with high endurance requirements with the pSLC versions N-16m2 and
N-18m2. The N-20m2 is a very flexible
solution that can be cut into different
lengths, from 22110 to 2230.
N-10m2 / N-16m2
N-12m2 / N-18m2
N-20m2
22
ESD & EMI
Safe
Wide Temp.
Support
Although SATA is still a dominant interface in embedded and NetCom systems,
the future belongs to PCIe. PCIe breaks
the bandwidth limitations of SATA and
offers flexible solutions with multiple
lanes that can be combined. The second
innovation to increase the performance
is the new protocol NVMe, which has
been designed specifically for NonVolatile Memory. The protocol significantly reduces the latency of read and
write requests. The higher performance
also requires higher power consumption,
default implemented;
N-10m2 / N-16m2
N-12m2 / N-18m2
N-20m2 / N-26m2
INFORMATION
M.2 PCIe / NVMe
TYPE
STANDARD & INTERFACE
PCI Express (PCIe) Specification Revision 3.1 / NVMe 1.2
FORM FACTOR
PCIe 3.1 / NVMe 1.3
PCI Express® M.2 (2280) B&M key, 2 lanes
max 22110 M key, 4 lanes
OUTLINE DIMENSIONS
80 x 22 x 2.23 mm
110,80,60,42,30 x 22 x 3.5 mm
FLASH TYPE
3D NAND TLC / pSLC
3D NAND TLC / pSLC
DENSITY RANGE
120 GB - 960 GB / 40 GB - 320 GB
30 GB - 240 GB / 10 GB - 80 GB
DATA RETENTION
ENDURANCE [DWPD]*
15 GB - 240 GB / 5 GB - 80 GB
10 years @ life begin
1 year @ life end
max 2.17 / 25.0
max. 1.42 / 15.2
max. 0.6 / 6.0
TEMPERATURE
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
OPERATING TEMPERATURE
STORAGE TEMPERATURE
-40°C to +85°C
PERFORMANCE
SEQUENTIAL READ (MB/S)
SEQUENTIAL WRITE (MB/S)
RANDOM 4KB READ (IOPS)
RANDOM 4KB WRITE (IOPS)
up
up
up
up
to
to
to
to
1,600 / 1,620
1,000 / 1,070
190,000 / 195,000
190,000 / 195,000
up
up
up
up
to
to
to
to
1,570 / 1,520
860 / 860
100,000 / 148,000
166,000 / 166,000
up
up
up
up
to
to
to
to
1,750
750
149,000
106,000
ELECTRICAL DATA
VOLTAGE
POWER CONSUMPTION
3.3V +- 5%
Max. Read Active: 4.1 W
Max. Write Active: 3.6 W
Power State 3: < 500 mW
Max. Read Active:3.0 W
Max. Write Active: 2.4 W
Power State 3: < 500 mW
Typ. Read: 2.0 W
Typ. Write: 1.3 W
Power State 3: < 330 mW
FEATURE LIST
FEATURES & TOOLS
DRAM support
HMB support (Host memory buffer)
Active and Passive Data Care Management
AES 256 / E2E Data protection
Power Fail Data Loss Protection
Active State Power Management (ASPM) Support
NVMe Security Command Support
In-Field Firmware Update
Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.)
TCG OPAL 2.0 (on request for N-10m2 and N-20m2)
Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request)
MORE INFORMATION
For more details see www.swissbit.com/product-finder
* DWPD values are according to JESD219 Client Endurance Workload based on a service life of 3 years
NAND FLASH PRODUCTS
23
2.5" SATA SSDs
The new X-7x range is based on 3D NAND
TLC with focus on best TCO. The X-76 is
the flagship with 3D NAND pSLC, offering
the best endurance per cost. ALL products feature Swissbit's proven Power
Fail Safety, Data Care Management, a
detailed S.M.A.R.T.-based Life Time
Monitoring, NCQ, TRIM, advanced wear
leveling, bad block management, and
in-field firmware update functionality.
Wide Temp.
Support
ESD & EMI
Safe
Shock &
Vibration
Life Time
Monitor
Secure
Erase
Conformal
Coating
Temp.
Sensor
Power Loss
Protected
Wear
Leveling
Read-Only
Improved
TRIM
Support
Data Care
Managed
Longevity
WAF
Reduction
Swissbit's 2.5" SSDs are ideal solutions
for embedded applications requiring
reliable and long service life storage.
The X-60 SATA 6Gb/s series is Swissbit's
MLC-based solution for high performance, cost sensitive, high capacity
markets.
X-600 has best-in-class endurance
using SLC technology, while X-66 is the
perfect compromise with MLC NAND in
pSLC mode.
X-600
X-60 / X-66
X-70
X-75 / X-73 / X-76
24
Industry Leading;
default implemented;
on request;
not available
X-600 / X-66 / X-60
X-75
X-73 / X-76
X-70
INFORMATION
TYPE
2.5“ SATA Gen3 SSD
INTERFACE
DATA TRANSFER MODE
SATA Gen3 -6Gbit/s
ATA8
CONNECTOR
15 + 7 pin Serial ATA
OUTLINE DIMENSIONS
100 x 70 x 7 mm
FLASH TYPE
SLC / pSLC / MLC
DENSITY RANGE
3D NAND TLC
3D NAND TLC / pSLC
3D NAND TLC
SLC: X-600: 8 GB – 256 GB
pSLC: X-66: 16 GB – 480 GB
MLC: X-60: 30 GB – 960 GB
60 GB - 1920 GB
X-73: 30 GB - 960 GB
X-76: 10 GB - 320 GB
60 GB - 480 GB
30.5 / 13.2 / 2.0
max 0.93
DATA RETENTION
ENDURANCE [DWPD]*
10 years @ life begin | 1 year @ life end
max 0.93 / 9.5
max 1.85
TEMPERATURE
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
OPERATING TEMPERATURE
STORAGE TEMPERATURE
Commercial: 0°C to +70°C
-40°C to +85°C
PERFORMANCE
SEQUENTIAL READ (MB/S)
SEQUENTIAL WRITE (MB/S)
RANDOM 4KB READ (IOPS)
RANDOM 4KB WRITE (IOPS)
up to 520 / 520 / 525
up to 425 / 450 / 460
up to 79,000 / 80,000 / 74,300
up to 76,000 / 75,000 / 77,900
up to 565
up to 495
up to 73,600
up to 79,400
up to 565 / 565
up to 495 / 480
up to 73,600 / 77,000
up to 79,400 / 85,000
up to 560
up to 465
up to 83,500
up to 66,900
ROBUSTNESS
MTBF
≥2,000,000 hours
SHOCK
1,500 G, 0.5 ms
VIBRATION
50 G, 80-2,000 Hz
HUMIDITY
20 G, 80-2,000 Hz
85 % RH 85 °C, 1,000 hrs
ELECTRICAL DATA
VOLTAGE
5 V ± 10% / 3.3 V ± 5%
POWER CONSUMPTION
Read (Active): 2.45 W
Write (Active): 3.8 W
Idle: 550 mW
Slumber: 125 mW
5 V ± 10 %
Read (Active): 2.5 W
Write (Active): 3.3 W
Idle: 475 mW
Partial: 175 mW
Read (Active): 2.7 W
Write (Active): 3.4 W
Idle: 475 mW
Partial: 125 mW
Read (Active): 3.0 W
Write (Active): 3.1 W
Idle: 600 mW
Slumber: 200 mW
FEATURE LIST
FEATURES & TOOLS
MORE INFORMATION
Proven Power Fail Safety
NCQ, TRIM
Advanced Wear Leveling &
Bad Blockmanagement
In-field firmware update
SBLTM Tool & SDK for S.M.A.R.T.
based Life Time Monitoring
AES 256 Encryption optional
E2E Data Protection
AES 256 Encryption optional
TCG OPAL optional
Proven Power Fail Safety
NCQ, TRIM, Data Refresh
In-field firmware updateS
SBLTM Tool & SDK for detailed S.M.A.R.T. based
Life Time Monitoring
Proven Power Fail Safety
NCQ, TRIM
Advanced Wear Leveling &
Bad Block management
In-field firmware update
SBLTM Tool & SDK for S.M.A.R.T.
based Life Time Monitoring
For more details see www.swissbit.com/product-finder
* DWPD values are according to JESD219 Client Endurance Workload based on a service life of 3 years
NAND FLASH PRODUCTS
25
SATA Modules
The five families, X-75, X-76, X-60,
X-66, and X-600, target different use
cases including OS booting, data logging,
surveillance recording, or vaulting. The
amount and type of write access defines
the required endurance in TBW. Swissbit
provides their detailed S.M.A.R.T-based
Life Time Monitor, which helps to analyze
the use case and identify the best fit
between the Swissbit SSD product families
and the user application.
Wide Temp.
Support
ESD & EMI
Safe
Shock &
Vibration
Life Time
Monitor
Secure
Erase
Conformal
Coating
Temp.
Sensor
Power Loss
Protected
Wear
Leveling
Read-Only
Improved
TRIM
Support
Data Care
Managed
Longevity
WAF
Reduction
Equally to the 2.5“ drives, the Swissbit
mSATA (MO-300), SLIM SATA (MO-297),
and the M.2 SSDs target embedded
applications that require solid state
storage in small, removable form factors.
The SSD modules are designed for robustness against frequent temperature
changes within the -40°C to 85°C range,
withstand high shock and vibration, and
offer superior performance and endurance.
X-600m/s/m2
X-60 / X-66m/s/m2
X-200m/s
X-75 / X-76m/s/m2
26
Industry Leading;
default implemented;
on request;
not available
X-600m
X-600s
X-600m2
X-200m
X-200s
INFORMATION
TYPE
MO-300 mSATA
MO-297 SLIM SATA
INTERFACE
DATA TRANSFER MODE
M.2 2242
M.2 2260 / 2280
SATA Gen3 -6Gbit/s
ATA8
CONNECTOR
52 pos. Edge
Connector PCI
Express (PCIe) mini
15 + 7 pin Serial ATA
Connector
OUTLINE DIMENSIONS
50.8 x 29.85 mm
54 x 39 mm
THICKNESS (MAX)
3.8 mm
4.0 mm
MO-297 SLIM SATA
SATA Gen2 - 3 Gbit/s
up to PIO4, MDMA2, UDMA6
75 pos. Edge
Connector
B & M key
22 x 42 mm
22 x 60 / 80 mm
3.58 mm
FLASH TYPE
DENSITY RANGE
MO-300 mSATA
52 pos. PCI Express
(PCIe) mini
15 + 7 pin Serial ATA
Connector
50.8 x 29.85 mm
54 x 39 mm
3.8 mm
4.0 mm
SLC
8 GB - 128 GB
16 GB - 128 GB
8 GB - 64 GB
DATA RETENTION
16 GB - 128 GB
2 GB - 64 GB
10 years @ life begin | 1 year @ life end
ENDURANCE [DWPD]*
30.5
3.5
TEMPERATURE
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
OPERATING TEMPERATURE
STORAGE TEMPERATURE
-40°C to +85°C
PERFORMANCE
SEQUENTIAL READ (MB/S)
SEQUENTIAL WRITE (MB/S)
RANDOM 4KB READ (IOPS)
RANDOM 4KB WRITE
(IOPS)
up to 520
up to 405
up to 76,000
up to 73,000
up to 520
up to 245
up to 76,000
up to 54,000
up to 520
up to 405
up to 76,000
up to 73,000
up to 120
up to 95
up to 3,100
up to 25
ROBUSTNESS
MTBF
≥2,000,000 hours
SHOCK
1,500 G, 0.5 ms
VIBRATION
50 G, 80-2,000 Hz
HUMIDITY
20 G, 10-2,000 Hz
85 % RH 85°C, 1,000 hrs
ELECTRICAL DATA
VOLTAGE
3.3 V ± 5 %
5 V ± 10 %
POWER CONSUMPTION
Read (Active): 1.7 W
Write (Active): 2.5 W
Idle: 380 mW
Slumber: 115 mW
Read (Active): 2.0 W
Write (Active): 2.9 W
Idle: 550 mW
Slumber: 275 mW
3.3 V ± 5 %
Read (Active): 1.7 / 1.5 W
Write (Active): 2.5 / 1.7 W
Idle: 380 / 345 mW
Slumber: 115 mW
5 V ± 10 %
Read (Active): 1.3 W
Write (Active):1.6W
Idle: 660 mW
Read (Active): 1.5 W
Write (Active):1.6W
Idle: 700 mW
FEATURE LIST
FEATURES & TOOLS
MORE INFORMATION
Proven Power Fail Safety
NCQ, TRIM
Advanced Wear Leveling & Bad Block management
In-field firmware update
SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring
AES 256 Encryption (optional)
Proven Power Fail Safety
Advanced Wear Leveling & Bad Block
management
SBLTM Tool & SDK for S.M.A.R.T. based Life
Time Monitoring
For more details see www.swissbit.com/product-finder
* DWPD values are according to JESD219 Client Endurance Workload based on a service life of 3 years
NAND FLASH PRODUCTS
27
X-60m2 / X-66m2
X-60s / X-66s
X-60m / X-66m
INFORMATION
M.2 2242
TYPE
M.2 2260 / 2280
MO-297 SLIM SATA
INTERFACE
DATA TRANSFER MODE
MO-300 mSATA
SATA Gen3 -6Gbit/s
ATA8
CONNECTOR
75 pos. Edge Connector B & M key
15 + 7 pin Serial ATA Connector
52 pos. Edge Connector
PCI Express (PCIe) mini
OUTLINE DIMENSIONS
22 x 42 mm
22 x 60 / 80 mm
54 x 39 mm
50.8 x 29.85 mm
THICKNESS (MAX)
3.58 mm
3.58 mm
4.0 mm
3.8 mm
FLASH TYPE
DENSITY RANGE
MLC durabitTM | pSLC everbitTM
durabit
everbit
30 GB – 240 GB
16 GB – 120 GB
30 GB – 960 GB
16 GB – 480 GB
DATA RETENTION
30 GB – 480 GB
16 GB – 240 GB
8 GB – 480 GB
16 GB – 240 GB
10 years @ life begin | 1 year @ life end
ENDURANCE [DWPD]*
durabitTM: 2.0 | everbitTM: 13.2
TEMPERATURE
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
OPERATING TEMPERATURE
STORAGE TEMPERATURE
-40°C to +85°C
PERFORMANCE
SEQUENTIAL READ (MB/S)
SEQUENTIAL WRITE (MB/S)
RANDOM 4KB READ (IOPS)
RANDOM 4KB WRITE
(IOPS)
up to 520 / 520
up to 340 / 415
up to 72,000 / 80,000
up to 78,000 / 73,000
up to 520 / 520
up to 450 / 450
up to 75,000 / 80,000
up to 75,000 / 75,000
ROBUSTNESS
MTBF
≥2,000,000 hours
SHOCK
1,500 G, 0.5 ms
VIBRATION
50 G, 80-2,000 Hz
HUMIDITY
85 % RH 85°C, 1,000 hrs
ELECTRICAL DATA
3.3 V ± 5 %
VOLTAGE
POWER CONSUMPTION
Read (Active): 1.3 W
Write (Active): 1.6 W
Idle: 360 mW
Slumber: 115 mW
Read (Active): 1.6 W
Write (Active): 3.4 W
Idle: 415 mW
Slumber: 115 mW
5 V ± 10 %
3.3 V ± 5 %
Read (Active): 1.7 W
Write (Active): 3.7 W
Idle: 550 mW
Slumber: 275 mW
Read (Active): 1.5 W
Write (Active): 3.2 W
Idle: 380 mW
Slumber: 115 mW
FEATURE LIST
FEATURES & TOOLS
MORE INFORMATION
Proven Power Fail Safety
NCQ, TRIM
Advanced Wear Leveling & Bad Block management
In-field firmware update
SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring
AES 256 Encryption (optional)
For more details see www.swissbit.com/product-finder
* DWPD values are according to JESD219 Client Endurance Workload based on a service life of 3 years
28
FLASH STORAGE SOLUTIONS
X-75/76m2
X-75/76s
X-75/76m
INFORMATION
TYPE
M.2 2242
M.2 2280
MO-297 SLIM SATA
INTERFACE
DATA TRANSFER MODE
MO-300 mSATA
SATA Gen3 -6Gbit/s
ATA8
CONNECTOR
75 pos. Edge Connector B & M key
15 + 7 pin Serial ATA
52 pos. PCI Express (PCIe) mini
OUTLINE DIMENSIONS
22 x 42 mm
22 x 80 mm
54 x 39 mm
50.8 x 29.85 mm
THICKNESS (MAX)
3.58 mm
3.58 mm
4.0 mm
3.8 mm
X-75m2: 30 GB - 480 GB
X-76m2: 10 GB - 160 GB
X-75m2: 30 GB - 960 GB
X-76m2: 10 GB - 320 GB
FLASH TYPE
DENSITY RANGE
X-75*: 3D NAND TLC | X-76*: 3D NAND pSLC
DATA RETENTION
X-75s: 30 GB - 960 GB
X-76s: 10 GB - 320 GB
X-75m: 30 GB - 960 GB
X-76m: 10 GB - 320 GB
10 years @ life begin | 1 year @ life end
ENDURANCE [DWPD]*
X-75*: max 0.98 | X-76*: max 21.7
TEMPERATURE
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
OPERATING TEMPERATURE
STORAGE TEMPERATURE
-40°C to +85°C
PERFORMANCE
SEQUENTIAL READ (MB/S)
SEQUENTIAL WRITE (MB/S)
RANDOM 4KB READ (IOPS)
RANDOM 4KB WRITE (IOPS)
up to 565 / 565
up to 490 / 480
up to 73,200 / 77,400
up to 79,400 / 84,900
up
up
up
up
to
to
to
to
565 / 565
495 / 490
73,600 / 77,400
79,400 / 84,900
up to 565 / 565
up to 495 / 490
up to 73,600 / 77,400
up to 79,400 / 84,900
up to 565 / 565
up to 495 / 490
up to 73,600 / 77,400
up to 79,400 / 84,900
ROBUSTNESS
MTBF
≥2,000,000 hours
SHOCK
1,500 G, 0.5 ms
VIBRATION
50 G, 80-2,000 Hz
HUMIDITY
85 % RH 85°C, 1,000 hrs
ELECTRICAL DATA
3.3 V ± 5 %
VOLTAGE
POWER CONSUMPTION
Read (Active): 2.2 W
Write (Active): 2.9 W
Idle: 395 mW
Partial: 115 mW
Read (Active): 2.3 W
Write (Active): 3.0 W
Idle: 395 mW
Partial: 115 mW
5 V ± 10 %
3.3 V ± 5 %
Read (Active): 2.7 W
Write (Active): 3.4 W
Idle: 475 mW
Partial: 125 mW
Read (Active): 2.4 W
Write (Active): 3.0 W
Idle: 395 mW
Partial: 100 mW
FEATURE LIST
FEATURES & TOOLS
MORE INFORMATION
E2E Data Protection
AES 256 Encryption (optional) / TCG OPAL 2.0 (optional)
Advanced Wear Leveling, Bad Block Management
Proven Power Fail Safety
NCQ, TRIM
Data Refresh
In-field firmware update
SBLTM Tool & SDK for detailed S.M.A.R.T. based Life Time Monitoring
For more details see www.swissbit.com/product-finder
* DWPD values are according to JESD219 Client Endurance Workload based on a service life of 3 years
NAND FLASH PRODUCTS
29
CFast Cards
TM
Swissbit's CFast™ cards provide rugged and
easy replaceable storage for embedded and
industrial systems. The Swissbit CFast™ card
portfolio covers the range from high-end
SLC-based F-600 to the cost/performance
optimized F-50. With an equal feature set
as the 2.5“ X-60 SSD, the F-60 MLC product
and F-66 pSLC card are perfect devices for
high performance and endurance and the
lowest total cost of ownership.
Wide Temp.
Support
ESD & EMI
Safe
Shock &
Vibration
Life Time
Monitor
Secure
Erase
Conformal
Coating
Temp.
Sensor
Power Loss
Protected
Wear
Leveling
Read-Only
Improved
TRIM
Support
Data Care
Managed
Longevity
WAF
Reduction
CFast™ cards combine the CompactFlash™
(CF) card form factor and the Serial ATA
(SATA) interface into a single product.
CFast™ cards can replace both HDDs and
CompactFlash™ cards in applications
requiring small form factors, high endurance, and the ability to withstand shock,
vibration, extreme temperatures (-40°C
to +85°C), and rough environmental
conditions.
F-600
F-60 / F-66
F-50 / F-56
F-240
30
Industry Leading;
default implemented;
on request;
not available
F-600
F-60 / F-66
F-50 / F-56
F-240
INFORMATION
TYPE
CFast™ CARD
INTERFACE
DATA TRANSFER MODE
CFast™ 2.0 - SATA Gen3
6Gbit/s ATA8
CONNECTOR
CFast™ Type I
OUTLINE DIMENSIONS
FLASH TYPE
DENSITY RANGE
36.4 x 42.8 x 3.6 mm
SLC
MLC durabitTM / pSLC everbitTM
MLC / pSLC
SLC
8 GB - 64 GB
MLC: 8 GB - 240 GB
pSLC: 4 GB - 120 GB
MLC: 8 GB - 256 GB
pSLC: 4 GB - 128 GB
2 GB - 64 GB
DATA RETENTION
ENDURANCE [DWPD]*
CFast™ 1.0 - SATA Gen2
3Gbit/s ATA7
10 years @ life begin | 1 year @ life end
33.8
1.98 / 13.2
max 1.50 / 7.98
max 2.63
TEMPERATURE
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
OPERATING TEMPERATURE
STORAGE TEMPERATURE
-40°C to +85°C
PERFORMANCE
SEQUENTIAL READ (MB/S)
SEQUENTIAL WRITE (MB/S)
RANDOM 4KB READ (IOPS)
RANDOM 4KB WRITE (IOPS)
up to 520
up to 245
up to 76,000
up to 54,000
up to 520 / 520
up to 180 / 415
up to 72,000 / 80,000
up to 43,000 / 75,000
up to 500 / 510
up to 330 / 415
up to 53,500 / 32,000
up to 74,000 / 66,000
up to 120
up to 120
up to 3,200
up to 75
ROBUSTNESS
MTBF
≥ 2,000,000 hours
SHOCK
1,500 G, 0.5 ms
VIBRATION
50 G, 80-2,000 Hz
HUMIDITY
≥ 2,500,000 hours
500 G, 1 ms
500 G, 1 ms
20 G, 80-2,000 Hz
20 G
85 % RH 85°C, 1,000 hrs
ELECTRICAL DATA
VOLTAGE
POWER CONSUMPTION
3.3 V ± 5 %
Read (Active): 1.6 W
Write (Active): 2.4 W
Idle: 347 mW
Slumber: 115 mW
Read (Active): 1.4 W
Write (Active): 1.8 W
Idle: 380 mW
Slumber: 116 mW
Read (Active): 1.2 W
Write (Active): 2.1 W
Idle: 248 mW
Slumber: 17 mW
Max. 3.2 W
Idle: 380 mW
PHYSLP < 80 mW
FEATURE LIST
FEATURES & TOOLS
MORE INFORMATION
Proven Power Fail Safety
Sophisticated Wear Leveling &
Bad Block management
Read Disturb Management
TRIM
Low Power Consumption
Security & SBZoneProtection
features available
SBLTM Tool & SDK for S.M.A.R.T.
based Life Time Monitoring
Proven Power Fail Safety
NCQ, TRIM
Advanced Wear Leveling & Bad Block management
In-field firmware update
SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring
F-6x: AES 256 Encryption (optional)
For more details see www.swissbit.com/product-finder
* DWPD values are according to JESD219 Client Endurance Workload based on a service life of 3 years
NAND FLASH PRODUCTS
31
CompactFlash
ESD & EMI
Safe
Shock &
Vibration
Life Time
Monitor
Secure
Erase
Conformal
Coating
Power Loss
Protected
Wear
Leveling
Read-Only
Improved
TRIM
Support
Data Care
Managed
Longevity
WAF
Reduction
C-300
C-300 LONGEVITY
C-320
C-440
C-500 / C-56 / C-50
32
All Swissbit's CF Series are offered in
both commercial (0°C to +70°C) and
industrial (-40°C to +85°C) temperature
ranges. Swissbit's most recent CF Card
product families C-500, C-50 and C-56
are using page based Flash management
and thus provide the highest write IOPS
rate as well as outstanding endurance.
Wide Temp.
Support
To this day, CompactFlash™ (CF) cards are
widely used as boot and data logging
devices in many NetCom and industrial
applications.
Swissbit's dedication to these markets is
shown by the broad portfolio and recent
launch of a new product family.
Swissbit products are developed with
a strong focus on quality, reliability,
robustness, and longevity.
TM
Industry Leading;
default implemented;
on request;
not available
C-50 / C-56
UDMA6 CF
C-500
UDMA6 CF
C-440
UDMA6 CF
C-300 / C-300L / C-320
INFORMATION
TYPE
INTERFACE
DATA TRANSFER MODE
COMPACTFLASHTM CARD
CFA5.0
CFA4.1
True IDE / PC card - Up to
UDMA4, MDMA4 & PIO6
True IDE / PC card - Up to
UDMA6, MDMA4 & PIO6
CONNECTOR
CFC Type I
OUTLINE DIMENSIONS
36.4 x 42.8 x 3.3 mm
FLASH TYPE
DENSITY RANGE
C-300: 128 MB-4 GB
C-300L: 128 MB - 1 GB
C-320: 2 GB - 32 GB
2 GB - 64 GB
DATA RETENTION
ENDURANCE [DWPD]*
MLC durabitTM / pSLC everbitTM
SLC
512 MB - 64 GB
C-50: 8 GB - 128 GB
C-56: 4 GB - 64 GB
10 years @ life begin | 1 year @ life end
C-300: max 1.70
C-320: max 0.92
max 2.15
C-50: max 0.14
C-56: max 1.11
max 3.50
TEMPERATURE
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
OPERATING TEMPERATURE
STORAGE TEMPERATURE
-40°C to +85°C
PERFORMANCE
SEQUENTIAL READ (MB/S)
SEQUENTIAL WRITE (MB/S)
RANDOM 4KB READ (IOPS)
RANDOM 4KB WRITE (IOPS)
up to 45
up to 35
up to 3,300
up to 50
up to 65
up to 35
up to 2,400
up to 300 (with TRIM)
up to 64
up to 44
up to 3,200
up to 1,900
up to 114 / 115
up to 39 / 66
up to 3,500 / 5,000
up to 2,400 / 3,300
ROBUSTNESS
MTBF
≥ 3,000,000 hours
SHOCK
1,500 G
VIBRATION
20 G
HUMIDITY
85 % RH 85°C, 1,000 hrs
ELECTRICAL DATA
VOLTAGE
POWER CONSUMPTION
3.3 V ± 5 % | 5 V ± 10 %
PIO typ 60 mA @ 3.3 V
DMA typ 90 mA @ 3.3 V
DMA typ 130 mA @ 5 V
PIO typ 60 mA @ 3.3 V
DMA typ 80 mA @ 3.3 V
DMA typ 90 mA @ 5 V
Proven Power Fail Safety
Sophisticated Wear Leveling &
Bad Block management
Security & SBZoneProtection
features available
SBLTM Tool & SDK for S.M.A.R.T.
based Life Time Monitoring
Proven Power Fail Safety
Sophisticated Wear Leveling &
Bad Block management
Read Disturb Management
TRIM
Security & SBZoneProtection
features available
SBLTM Tool & SDK for S.M.A.R.T.
based Life Time Monitoring
max 120 mA
Idle 4.5 mA
max 130 mA
Idle 4.5 mA
FEATURE LIST
FEATURES & TOOLS
MORE INFORMATION
Page based FTL for maximum Endurance
Proven Power Fail Safety
Sophisticated Wear Leveling &
Bad Block management
Read Disturb Management
TRIM
Security & SBZoneProtection
features available
SBLTM Tool & SDK for S.M.A.R.T.
based Life Time Monitoring
For more details see www.swissbit.com/product-finder
* DWPD values are according to JESD219 Enterprise Endurance Workload based on a service life of 3 or 5 years
NAND FLASH PRODUCTS
33
SD Memory Cards
S-450
S-455
S-30
S-50
Industry Leading;
WAF
Reduction
S-46
Longevity
S-45
Data Care
Managed
Read-Only
Improved
Wear
Leveling
Life Time
Monitor
Power Loss
Protected
Shock &
Vibration
Conformal
Coating
ESD & EMI
Safe
S-200
34
conditions. The SLC based S-450/455
offers the best sequential performance and
highest endurance, while the durabit™
S-45 and the everbit™ S-46 series rely
on MLC NAND. They combine an industry
leading controller with sub-page-based
firmware and achieve unprecedented
random write performance. The new S-30
and S-50 models feature 3D NAND, with
S-30 targeting read-mostly applications
and S-50 as a full featured device.
Wide Temp.
Support
Secure Digital (SD) memory cards have
a widespread use in industrial and
automotive applications, ranging from
read only applications as in navigation
systems to utilization as boot media,
for video recording, or data logging.
Swissbit's Industrial Secure Digital (SD)
card series is designed for high sustained
performance and endurance and is manufactured and tested in Swissbit's own
fab to withstand extreme environmental
default implemented;
on request;
not available
S-200
S-450 / 455
S-45 / S-46
S-30
S-50
INFORMATION
TYPE
INTERFACE
DATA TRANSFER MODE
SD MEMORY CARD
(SD / SDHC / SDXC)
SD MEMORY CARD (SD / SDHC)
SD 2.0, Class 6
SD 6.1, Class 10, UHS-I,
V30, A1
SD 3.0, Class 10, UHS-I
CONNECTOR
SD 6.1, Class 10, UHS-I,
A1, Automotive Type
SD
OUTLINE DIMENSIONS
32 x 24 x 2.1 mm
FLASH TYPE
DENSITY RANGE
SD MEMORY CARD
(SDHC / SDXC)
MLC durabitTM
pSLC everbitTM
SLC
512 MB - 2 GB (SD)
512 MB - 2 GB (SD)
4 GB - 32 GB (SDHC)
DATA RETENTION
3D NAND TLC
S-45: 4 GB - 128 GB
S-46: 2 GB - 64 GB
32 GB (SDHC)
64 GB - 256 GB (SDXC)
32 GB (SDHC)
64 GB - 128 GB (SDXC)
10 years @ life begin | 1 year @ life end
100k P/E Cycles
(Flash Cell Level)
ENDURANCE
S-45: 3k P/E Cycles
S-46: 20k P/E Cycles
1k P/E Cycles
3k P/E Cycles
Extended: -25°C to +85°C
Extended: -25°C to +85°C
Industrial: -40°C to +85°C
-40°C to +85°C
-40°C to +100°C
up to 95
up to 85
up to 1,700
up to 1,050
typ 90
typ 40
typ 2,050
typ 800
TEMPERATURE
Extended: -25°C to +85°C
Industrial: -40°C to +85°C
OPERATING TEMPERATURE
STORAGE TEMPERATURE
-40°C to +100°C
PERFORMANCE
SEQUENTIAL READ (MB/S)
SEQUENTIAL WRITE (MB/S)
RANDOM 4KB READ (IOPS)
RANDOM 4KB WRITE (IOPS)
up to 24
up to 18
up to 1,640
up to 31
up to 88 / 44
up to 73 / 38
up to 1,430 / 1,250
up to 28 / 1,100
up to 43 / 46
up to 21 / 52
up to 1,200 / 1,440
up to 950 / 1,260
ROBUSTNESS
MTBF
≥ 3,000,000 hours
SHOCK
1,000 G
VIBRATION
15 G
1,500 G
50 G
HUMIDITY
20 G
50 G
Read typ 80 mA
Write typ 100 mA
Read typ 110 mA
Write typ 110 mA
Support SD SPI mode
Static and Dynamic
Wear Leveling
Bad Block Management
Auto-Read Refresh
Embedded Mode
Support SD SPI mode
Proven Power Fail Safety
Sophisticated Wear
Leveling & Bad Block
management
Autonomous Data Care
Management
SBLTM Tool & SDK for
detailed Life Time
Monitoring
85 % RH 85°C, 1,000 hrs
ELECTRICAL DATA
VOLTAGE
POWER CONSUMPTION
2.7 -3.6 V Normal
Read typ 40 mA
Write typ 65 mA
Read typ 75 mA
Write typ 75 mA
Read typ 80 mA
Write typ 70 mA
FEATURE LIST
FEATURES & TOOLS
MORE INFORMATION
Proven Power Fail Safety
Sophisticated Wear
Leveling & Bad Block
management
Diagnostic features & Life
Time Monitoring through
SD / SPI command set
S-450 block based FTL / S-455, S-45, S-46 page based FTL
Proven Power Fail Safety
Sophisticated Wear Leveling & Bad Block management
Autonomous Data Care Management
SBLTM Tool & SDK for detailed Life Time Monitoring
For more details see www.swissbit.com/product-finder
NAND FLASH PRODUCTS
35
microSD Cards
S–45u
S–46u
S–450u
S–455u
S–30u
S–50u
36
Industry Leading;
default implemented;
on request;
WAF
Reduction
Longevity
Data Care
Managed
Read-Only
Improved
Wear
Leveling
S–200u
Power Loss
Protected
Conformal
Coating
Life Time
Monitor
ESD & EMI
Safe
S–300u
pSLC configuration S-46u, feature a
long list of hardware and firmware
improvements.
Sub-page based firmware, known under
the durabit™ and everbit™ brands, enables unprecedented endurance and random
write performance for S-455u, S-46u and
S-45u. The Swissbit Life Time Monitor
support allows you to choose the perfect
product for your use case. The new S-30u
and S-50u models feature 3D NAND, with
S-30u targeting read-mostly applications
and S-50u as a full featured device.
Shock &
Vibration
Wide Temp.
Support
Manufactured in Swissbit's own fab with
chip on board technology and based on
a dedicated industrial controller and
reliable NAND flash, the microSD memory
cards withstand extreme environmental
conditions and provide the highest level
of mechanical stability and enhanced
ESD protection. Furthermore, the hard
gold SD connectors endure a minimum
of 20,000 insertion cycles.
The different series in SLC technology
(S-300u, S-200u and S-450/455u), as
well as the MLC products S-45u and the
not available
S–200u / 300u
S–450u / 455u
S–45u / 46u
S–30u
S–50u
INFORMATION
TYPE
microSD MEMORY CARD
SD / SDHC
INTERFACE
DATA TRANSFER MODE
SD 2.0, Class 10 / 6
microSD MEMORY CARD
SD
microSD MEMORY CARD
SDHC / SDXC
SD 3.0, Class 10, UHS-I
CONNECTOR
microSD MEMORY CARD
SDHC / SDXC
SD 6.1, Class 10, UHS-I,
V30, A1
SD 6.1, Class 10, UHS-I,
A1, Automotive Type
microSD
OUTLINE DIMENSIONS
15 x 11 x 0.7 / 1 mm
FLASH TYPE
DENSITY RANGE
microSD MEMORY CARD
SDHC / SDXC
S-45u: MLC durabitTM
S-46u: pSLC everbitTM
SLC
512 MB - 2 GB (SD)
4 GB - 8 GB (SDHC)
512 MB - 2 GB (SD)
4 GB - 8 GB (SDHC)
DATA RETENTION
3D NAND TLC
2 GB - 32 GB (SDHC)
64 GB (SDXC)
32 GB (SDHC)
64 GB - 256 GB (SDXC)
32 GB (SDHC)
64 GB - 128 GB (SDXC)
10 years @ life begin | 1 year @ life end
100k P/E Cycles
ENDURANCE (FLASH)
3k / 20k P/E Cycles
1k P/E Cycles
3k P/E Cycles
Extended: -25°C to +85°C
Extended: -25°C to +85°C
Industrial: -40°C to +85°C
-40°C to +85°C
-40°C to +100°C
up to 95
up to 85
up to 1,700
up to 1,050
typ 90
typ 40
typ 2,050
typ 800
TEMPERATURE
Extended: -25°C to +85°C
Industrial: -40°C to +85°C
OPERATING TEMPERATURE
STORAGE TEMPERATURE
-40°C to +85°C
-40°C to +100°C
PERFORMANCE
SEQUENTIAL READ (MB/S)
SEQUENTIAL WRITE (MB/S)
RANDOM 4KB READ (IOPS)
RANDOM 4KB WRITE (IOPS)
up to 19 / 24
up to 21 / 22
up to 30 / 40
up to 24 / 28
up to 1,200 / 1,150
up to 28 / 1,500
up to 44 / 42
up to 19 / 40
up to 1,350 / 1,400
up to 950 / 1,250
ROBUSTNESS
MTBF
SHOCK
VIBRATION
HUMIDITY
≥ 3,000,000 hours
1,500/ 1,000 G
1,500 G
50 / 15 G
50 G
93 % RH 40°C, 500 hrs
85 % RH 85°C, 1,000 hrs
ELECTRICAL DATA
VOLTAGE
POWER CONSUMPTION
2.7 - 3.6 V
Read typ 30 / 50
mAWrite typ 40 / 50 mA
Read typ 50 mA
Write typ 60 mA
Read typ 75 mA
Write typ 80 mA
Read typ 80 mA
Write typ 100 mA
Read typ 110 mA
Write typ 110 mA
Support SD SPI mode
Static and Dynamic
Wear Leveling
Bad Block Management
Auto-Read Refresh
Embedded Mode
Support SD SPI mode
Proven Power Fail
Safety
Sophisticated Wear
Leveling & Bad Block
management
Autonomous Data Care
Management
SBLTM Tool & SDK for
detailed Life Time
Monitoring
FEATURE LIST
FEATURES & TOOLS
MORE INFORMATION
Proven Power Fail
Safety
Advanced Wear
Leveling & Bad
Block management
S-450u block based FTL /
S-455u, S-45u, S-46u page based FTL
Proven Power Fail Safety
Sophisticated Wear Leveling & Bad Block management
Autonomous Data Care Management
SBLTM Tool & SDK for detailed Life Time Monitoring
For more details see www.swissbit.com/product-finder
NAND FLASH PRODUCTS
37
USB Products
All Swissbit USB solutions combine security features and Life Time Monitoring
tools for product life control.
Shock &
Vibration
Life Time
Monitor
Power Loss
Protected
Wear
Leveling
Data Care
Managed
TRIM
Support
WAF
Reduction
U-56n / U-50n
U-500 / U-400
U-500k / U-56k / U-50k
default implemented;
on request;
not available
Longevity
ESD & EMI
Safe
USB products are available in SLC, MLC,
and pSLC technology to meet the endurance and speed requirements of the
different use cases.
U-50 / U-56 / U-45 / U-46
38
qualify Swissbit's USB Flash Drive (UFDs)
for embedded and NetCom markets.
Wide Temp.
Support
The Universal Serial Bus (USB) is still a
widely used interface for NetCom system
booting or for update and licensing
purposes. Swissbit offers USB 2 and USB
3 products in different form factors and
in commercial and industrial operating
temperature ranges. State-of-the-art
NAND flash handling algorithms, stringent component selection, PCN control,
and a 100% final system test at the
full temperature range (−40°C to 85°C)
/
U-500
U-56 / 50 / 58
U-400
U-46 / U-45
U-500k
U-56k / U-50k
U-56 / U-50n
NANO
INFORMATION
TYPE
INTERFACE
DATA TRANSFER MODE
CONNECTOR
OUTLINE DIMENSIONS
eUSB FLASH MODULE
USB 3.1
Super Speed / High / Full
USB FLASH DRIVE
USB 2.0
High / FullSpeed
Standard: 2.54 mm -10 Pin (key option)
Low Profile: 2.00 mm -10 Pin (key option)
68.0 mm x 18.0 mm x 8.2 mm
24.0 mm x 12.1 mm x 4.5 mm
SLC / pSLC everbitTM / MLC durabitTM
SLC: 4 GB - 32 GB
pSLC: 4 GB - 32 GB
MLC: 8 GB - 64 GB
3D pSLC: 8 GB – 16GB
SLC: 1 GB - 32 GB
pSLC: 2 GB - 16 GB
MLC: 4 GB - 32 GB
DATA RETENTION
ENDURANCE [DWPD]*
USB 3.0 Type A-Plug
Standard: 36.8 mm x 26.65 mm x 9.7mm
Low Profile: 36.8 mm x 26.65 mm x 6.0mm
FLASH TYPE
DENSITY RANGE
USB 3.1
Super Speed / High / Full
SLC: 2 GB - 32 GB
pSLC: 8 GB - 64 GB
MLC: 16 GB - 128 GB
pSLC: 4 - 32 GB
MLC: 8 - 64 GB
10 years @ life begin | 1 year @ life end
U-500: 4.0 / U-58: 4.1 / U-56: 1.8 / U-50: 0.15 / U-400:0.8 / U-46: 1.51 / U-45: 0.15
TEMPERATURE
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
OPERATING TEMPERATURE
STORAGE TEMPERATURE
-40°C to +85°C
PERFORMANCE
SEQUENTIAL READ (MB/S)
SEQUENTIAL WRITE (MB/S)
RANDOM 4KB READ (IOPS)
RANDOM 4KB WRITE (IOPS)
up to 175 / 170 / 140
up to 95 / 90 / 60
up to 3,050 / 3,200 / 2,500
up to 1,000 / 1,050 / 700
up to 36 / 39 / 23
up to 27 / 29 / 18
up to 1,600 / 1,800 / 1,400
up to 30 / 800 / 550
up to 175 / 170 / 140
up to 95 / 90 / 60
up to 3,050 / 3,200 / 2,500
up to 1,000 / 1,050 / 700
up
up
up
up
to
to
to
to
190 / 140
115 / 60
3,600 / 2,600
1,250 / 750
ROBUSTNESS
MTBF
≥3,000,000 hours
SHOCK
1,500 G, 0.5 ms
VIBRATION
50 G
HUMIDITY
20 G
85% RH 85°C, 1,000 hrs
ELECTRICAL DATA
VOLTAGE
POWER CONSUMPTION
3.3 V ±5 % / 5 V ±10 %
5 V ± 10 %
Full Speed typ 70 mA
High Speed typ 80 mA
FEATURE LIST
FEATURES & TOOLS
MORE INFORMATION
Page based FTL for best write performance and endurance (not U-400)
Proven Power Fail Safety
Windows / Linux – Spare block read out
Bootable USB Drive
Supports latest OS as Fixed Drive
Connector pitch & key variations available
Shock & vibration resistant
For more details see www.swissbit.com/product-finder
* DWPD values are according to JESD219 Enterprise Endurance Workload based on a service life of 3 or 5 years
NAND FLASH PRODUCTS
39
Managed NAND
Small form factor embedded systems
have often used NAND components that
were directly interfaced and managed
by the host controller software. This
task has become a challenge due to the
increasing complexity of NAND devices
and their management.
Wide Temp.
Support
Life Time
Monitor
Secure
Erase
Power Loss
Protected
Wear
Leveling
TRIM
Support
Data Care
Managed
In-field
FW Update
WAF
Reduction
Instant
On
Low Power
Managed NAND is the solution: a single
small size BGA component incorporates
multiple Flash drives, a NAND controller
and the management firmware and
eases the integration.
EM-20 / EM-26
EM-10 / EM-16
EN-20
40
Swissbit's e.MMC EM-10 and EM-20
family covers multiple densities and
interface speeds. Sophisticated NAND
management makes the EM-20 ideal
for applications like POS/POI, PLC, IoT,
gaming, medical, or as a general boot
medium for embedded applications.
The EM-10 substitutes NOR / NAND
combinations with a fast boot option.
The EN-20 PCIe/NVMe BGA opens the
door for high speed at small density.
default implemented;
on request;
not available
EM-20 / EM-26
EM-10 / EM-16
EN-20
INFORMATION
TYPE
STANDARD & INTERFACE
e.MMC
e.MMC 5.0,
1-bit, 4-bit, 8-bit up to HS400
PACKAGE
PCIe Gen 3.1 / NVMe 1.3
4 PCIe lanes
153-ball BGA, 0.5mm pitch
OUTLINE DIMENSIONS
BGA, 0.8mm pitch
11.5 x 13 x 1 mm
FLASH TYPE
DENSITY RANGE
PCIe M.2 1620 BGA
e.MMC 4.41
1-bit, 4-bit, 8-bit up to SDR52
16 x 20 x 1.8 mm
MLC / pSLC reliable mode
4 GB - 64 GB MLC / 2 GB – 32 GB pSLC
3D NAND
4 GB - 16 GB MLC / 2 GB - 8 GB pSLC
DATA RETENTION
15 GB - 240 GB
10 years @ life begin | 1 year @ life end
ENDURANCE
3k P/E cycles MLC mode / 20k P/E cycles reliable mode
3k P/E cycles 3D NAND
TEMPERATURE
OPERATING TEMPERATURE
Industrial: -40°C to +85°C
STORAGE TEMPERATURE
-40°C to +85°C
PERFORMANCE
SEQUENTIAL READ (MB/S)
SEQUENTIAL WRITE (MB/S)
RANDOM 4KB READ (IOPS)
RANDOM 4KB WRITE (IOPS)
up
up
up
up
to
to
to
to
250 / 270
90 / 160
5,100 / 5,900
1,800 / 2,100
up
up
up
up
to
to
to
to
49 / 49
14 / 31
3,100 / 3,760
1,110 / 1,870
up
up
up
up
to
to
to
to
1,600
650
120,000
150,000
ELECTRICAL DATA
VOLTAGE
POWER CONSUMPTION
VCCQ: 1.70-1.95V / 2.70-3.60V ; VCC: 2.70-3.60
3.3V ±5%, 1.8V ±5%, 0.9V ±5%
Typ. Read Current: 180 mA @ 1.8V VCCQ, 38mA @ 3.3V VCC
Typ. Write Current: 105 mA @ 1.8V VCCQ, 80mA @ 3.3V VCC
Standby: 20 mA
Max. Active 5.7 W
FEATURE LIST
FEATURES & TOOLS
MORE INFORMATION
High performance up to HS400 mode
Sophisticated Wear Leveling &
Read Disturb Management
Page based FTL Management
Production State Awareness
Proven Power Fail Safety
Security features – secure erase & RPMB
Instant-up for fast boot
Data Care Manegement
Page based FTL Management
Production State Awareness
Proven Power Fail Safety
Safe Shutdown
Security features – secure erase & RPMB
Detailed S.M.A.R.T. data
HMB support
Dynamic and Static Wear Leveling
Page Mode Flash Translation Layer
Data Care Management
Write Amplification Reduction
Power Fail Data Loss Protection
In-Field Firmware Update
Self-Monitoring, Analysis, and
Reporting Technology (S.M.A.R.T.)
AES256 Encryption
TCG Opal (on request)
For more details see www.swissbit.com/product-finder
NAND FLASH PRODUCTS
41
SECURITY
PRODUCTS
HARDWARE SECURITY
Unique hardware security for the protection
of data and devices
Swissbit‘s modular security products are
based on standard interfaces and offer
system manufacturers a range of hardware-based cyber security solutions for
the protection of data and devices.
cover many applications including secure
boot and safeguarding M2M communication, as well as legally compliant and
tamper-proof data storage in bodycams
or cash register systems.
Swissbit provides easy-to-integrate and
retrofittable hardware-based security
products together with software development kits (SDK) and customization
services, enabling manufacturers to offer
systems with secured devices, secure
data storage, and secure data communication. Security products from Swissbit
There are many scenarios where the
need to store data and protect access
and communication can be achieved in
a single step. Swissbit‘s security products
are extremely robust and durable, which
makes them ideal for challenging applications with long life time and maintenance cycles.
CUSTOMER BENEFITS:
Easy to integrate, easy to retrofit, and
modular custom products with:
• fast time to market
• reduced development costs
• minimized life time risk
42
HARDWARE SECURITY PRODUCTS
Valuable data such as sensitive files,
emails, photos, OS images, firmware
updates, log files, and audit trails can
be protected by encryption, access protection, or made resistant to tampering
by digital signature. Voice and video
calls, as well as data streams for M2M
communication, can be protected by
the card in high speed. The best fitting
product can be chosen depending on
the use case.
Digitally
Sign &
Verify
Hardware
based
Encryption
2nd factor
authentication
Mobile
Banking
Secure
Voice
Elliptic
Curve
Crypto
Secure
CD-ROM
Secure
Logging
FIPS 140-2
MODE
SE
PE
DP
Industry Leading;
default implemented;
on request;
Secure
Storage
True
Hardware
RNG
The security product series in USB,
microSD, and SD form factors address the
growing demand for mobile, portable,
and industrial security. The products
offer tangible hardware security in the
same manner as the plug and play
approach. For various markets, Swissbit
adresses a broad set of security use
cases. The flash memory can be used by
any host to store data on the cards at
high speed. Additional security functions
of the card can be activated to protect
any data or device.
not available
SECURITY PRODUCTS
43
SECURITY EDITIONS
STANDARD EDITION SE
The Standard Edition SE fits best into authentication and PKI
(Public Key Infrastructure) use cases. The card is supported by
leading middleware vendors in mobile, desktop, and tablet
use cases to ensure a seamless design-in into existing security
infrastructures.
PREMIUM EDITION PE
The Premium Edition PE combines high-end smartcard security
with state-of-the-art data protection like CD-ROM, WORM, and
hidden storage. Data can be protected and digitally signed
and fully AES encrypted in one device. Additionally, PE cards
can provide a secure element according FIPS 140-2 certification.
DATA PROTECTION DP
AUDIT TRAILS / FISCAL
The Data Protection DP cards and USB drive offer state-of-the-art
data protection. All data stored in the Flash is AES encrypted
in high speed and can be protected by various options like
CD-ROM, PIN protected data, hidden storage, and WORM data
area.
Swissbit offers an audit trail solution for the tamper-proof
recording of fiscal data of Point-of-Sales (POS) systems and
has developed a plug-in solution that is extremely easy to
integrate.
44
PS-45 / 45u
PS-46 / 46u
PS-450 / 450u
PU-50n / 56n
INFORMATION
COMPLIANCE
SD 3.0 SD, ASSD V1.1
USB 3.1
DATA TRANSFER
UHS-1 Speed class 10
TEMPERATURE
-25°C to 85°C
USB 3.1 SuperSpeed
-25°C to 85°C
COMPATIBLE TO
S-45/45u
S-46/46u
S-450/450u
U-50n
FLASH TYPE
MLC
pSLC
SLC
MLC / pSLC
SE
Standard
Edition
SECURITY
PRODUCT
MATRIX
DEVICE
PE
Premium
Edition
PS-45 SD
8 GB – 16 GB
8 GB – 16 GB
8 GB
8 GB – 64 GB
8 GB – 16 GB
8 GB – 16 GB
8 GB
8 GB – 32 GB
PS-46 SD
4 GB – 8 GB
4 GB – 8 GB
4 GB – 32 GB
PS-46u microSD
4 GB – 8 GB
4 GB – 8 GB
4 GB – 16 GB
PS-450 SD
4 GB – 32 GB
4 GB – 32 GB
4 GB – 32 GB
PS-450u microSD
0.5 GB – 2 GB
0.5 GB – 2 GB
8 GB -16 GB*
Infineon / NXP smart card chip
CC EAL 5+/6+ HW and OS
Java card 3.0.1/ 3.0.4
Global Platform 2.2.1 / 2.2.2
Infineon JTOP/ NXP JCOP 3
RSA up to 2048 bit
optional ECC up to 512 / 521 bit
AES up to 256 bit
SHA2 up to 512 bit
RNG AIS31, FIPS-140
Compatible Middleware:
•AET SafeSign
•Cryptovision SCinterface
80 / 145 k EEPROM secure storage
DRIVERS / API
MORE INFORMATION
DP
Data
Protection
PS-45u microSD
PU-50n
SECURITY
AuditTrail /
Fiscal
Windows
Linux
Android
SDK available
PKCS#11 Middleware
0.5 GB – 2 GB
8 GB
8 GB - 64 GB
NXP smart card chip
Partitioning:
•CD-ROM
•Private
•Hidden/WORM
AES 256 bit flash
encryption
BSI TR-03153
certified TSE
SMAERS:EAL2
CSP: EAL4
384 bit encryption
Validity of signature
certificate: 5 or 7 years +
6 months for shelf
storage
User and administrator
PIN
Configurable retry
counter
Unique ID
Fast crypto wipe
Guaranteed 20 Mio
signatures
Signature processing
time < 250 ms
10 years retention
Windows
Linux
Android
Embedded on request
SDK available
Windows
Linux
RaspBerryPi
Arduino
SDK available
For more details see www.swissbit.com/product-finder
* higher capacity on request
SECURITY PRODUCTS
45
ADVANCED PACKAGING,
ASSEMBLY &
TEST SOLUTIONS
SYSTEM IN PACKAGE
System-in-Package (SiP) is the umbrella term for using
advanced packaging and assembly technologies to
integrate and test sensitive bare silicon dies or chips
(active circuits) and supporting components (passives)
into robust finished modules or components. Together
with integrated software or firmware this will create
a fully functional system solution.
With over 25 years of experience, Swissbit
successfully uses advanced packaging
technologies to achieve the smallest
form factors and to build multi-chippackages. Moreover, Swissbit develops
unique test hard- and software solutions for dedicated applications and
temperature ranges.
With this electronic integration and
testing approach, our products provide
more functionality inside one package,
various functional blocks (RF, digital,
sensors, security, and memory) and
passive components are combined.
Having all necessary capabilities
in-house we have the best design for
reliability, test and manufacturing.
For our highly-integrated SiPs (e.g.
MicroSD Card) we developed processes
for stacking multiple large dies, wire
bonding the smallest bond pads, and
molding the narrowest clearances.
46
Swissbit provides different assembly and
packaging technologies (e.g SMT, CoB,
FlipChip) in one single unit. The concentration of strong engineering and design
knowhow and experience enables new,
innovative electronic packages and
devices for a wide range of applications.
Our customers benefit from a reduced
development cost and higher yields and
reliability. We use smart production organizations, which allows the production
of small volume series with short lead
times and on-time delivery in high
product variations.
Swissbit produces and develops in accordance with ISO 9001, IATF 16949, and
ISO 14001 approved processes and is an
experienced partner for global industrial
and automotive accounts.
SYSTEM-IN-PACKAGE BENEFITS:
•
•
•
•
•
•
Reduced process complexity
Lower TCO (total cost of ownership)
Reduced system board space
Layer count reduction of system PCB
Mixed analog / digital design
Reduced system board test complexity
DIE ATTACH /
ADHESIVE
APPLY
CHIP BONDING
DIE STACKING
GRINDING &
DICING
WIRE
BONDING
SUBSTRATE
PCB
SMT
ENCAPSULATION
CONFORMAL
COATING
FLIP CHIP
FILM ASSISTED
TRANSFER
MOLDING
MARKING
UNDERFILL
SEPARATION /
SINGULATION
SIP PRODUCTS
47
WHERE YOU FIND US
HEADQUARTERS
SWISSBIT AG
USA
SWISSBIT NA INC.
ASIA
HEADQUARTERS SWITZERLAND
R&D, FAE support, Sales
Industriestrasse 4
9552 Bronschhofen
Switzerland
sales@swissbit.com
OFFICE WESTFORD, MA
R&D, FAE support
sales@swissbitna.com
JAPAN
FAE support, Sales
Tokyo
sales@swissbit.co.jp
OFFICE NEW YORK
Sales
sales@swissbitna.com
SWISSBIT GERMANY AG
SITE BERLIN
R&D, Production
Bitterfelder Straße 22
12681 Berlin
Germany
berlin@swissbit.com
OFFICE SILICON VALLEY, CA
Sales
sales@swissbitna.com
OFFICE HOUSTON, TX
Sales
sales@swissbitna.com
GREATER CHINA
FAE support
Dongguan City
salesasia@swissbit.com
TAIWAN
R&D, FAE support, Sales
Taipei City
salesasia@swissbit.com
Revision 1 / 2020
OFFICE MUNICH
R&D, FAE support, Sales
sales@swissbit.com
WWW.SWISSBIT.COM
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Swissbit:
SFPA2048Q1BO2TO-I-MS-243-STD SFPA2048Q1BO2TO-C-MS-243-STD SFPA32GBQ1BO8TO-I-QT-243-STD
SFPA8192Q1BO2TO-C-QT-243-STD SFPA32GBQ1BO8TO-C-QT-243-STD SFPA4096Q1BO2TO-I-DT-243-STD
SFPA8192Q1BO2TO-I-QT-243-STD SFPA16GBQ1BO4TO-I-QT-243-STD SFPA4096Q1BO2TO-C-DT-243-STD
SFPA16GBQ1BO4TO-C-QT-243-STD
工商网监
湘ICP备2023018690号
