SFUI8192J1AB2TO-I-MS-211-STD

Product Fact Sheet Industrial USB Flash Drive Module U-400 Series USB2.0, high speed U-400 Series (USB2.0, high speed) Industrial USB Flash Drive Module (eUSB) – 1 to 16GByte Main Features  USB2.0 solid state flash drive for internal 9(10)-pin USB connector terminal o Fully compliant with USB specification 2.0/3.0 (High-Speed, 480Mb/s burst) o Fully backward compliant with USB 1.1 systems (Full speed, 12Mb/s burst) o Dimension of 26.65 x 36.8mm o 2.54mm or 2.00mm connector with keyed pin9 (optional different key pins and pinouts) o Screw hole not connected (optional grounded) o Fix drive (optional removable) o LED for operation indication o Write protect switch (optional) o FAT32 preformatted o Diagnostic features with Life Time Monitoring tool support o Firmware update in field possible  High performance 2.0 specification o Up to 40 IOPS write and 1700 IOPS read (4KByte transfers) o Up to 34MBytes/s sequential write and 36MBytes/s read speed  Power Supply: (Low-power CMOS technology) o 3.1 to 5.5V operating voltage  Optimized FW algorithms especially for high read access and long data retention applications o Patented power-off reliability technology o Near Miss ECC technology Minimize the risk of uncorrectable bit failure over the product life time. Each read command analyzes the ECC margin level and refresh data if necessary o Read Disturb Management The read commands are monitored and the content is refreshed when critical levels have occurred o Wear Leveling technology Equal wear leveling of static and dynamic data. The wear leveling assures that dynamic data as well as static data is balanced evenly across the memory. With that the maximum write endurance of the device is guaranteed o Data Care Management The interruptible background process maintain the user data for Read Disturb effects or Retention degradation due to high temperature effects -17 o UBER