A5645

Mica 2.4 GHz SMD Antenna Product Specification 1 Features • Designed for 2.4 GHz applications [Bluetooth™, WiFi™ (802.11b/g), Zigbee™, WiMedia™ etc.] • Intended for SMD mounting • Supplied in tape on reel 2 Description The Mica antenna is intended for use with all 2.4 GHz applications. The antenna requires a groundplane, i.e. your device acts as an active part of the antenna and thus demand careful consideration concerning its placement. 3 Application • Mobile phones • PDAs • Headsets • Laptops • Medical equipment • Automotive Integrated Antenna Solutions  Product Specification FE010315-G Mica 2.4 GHz SMD Antenna Contents 1 Features 1 2 Description 1 3 Application 1 4 Model name 3 5 General data 3 6 Electrical characteristics 3 7 Electrical performance 3 7-2 3D-Radiation 4 7-3 Radiation patterns 4 8 Antenna Dimensions 5 9 Antenna Footprint 5 10 Electrical interface 6 10-1 Transmission line and matching 6 10-2 Test board dimensions 6 10-3 Test board matching 7 7 11 Soldering 11-1 Recommended soldering conditions 7 11-2 Leadfree soldering 7 8 12 Reliability 12-1 Temperature and Humidity 8 12-2 Mechanical 8 12-3 Miscellaneous 8 12-4 Judgement standard 9 13 Hazardous Material Regulation Conformance 9 14 Application example 9 15 Packaging 10 15-1 Shelf storage recommendation 10 15-2 Tape characteristics 10 15-3 Reel dimension 11 15-4 Box dimension 11 15-5 Bag properties 11 15-6 Reel label information 11 Integrated Antenna Solutions  Product Specification FE010315-G Mica 2.4 GHz SMD Antenna 4 Model name 30 30 A5645 - 01 Drawing No. Technology -PCB Antenna Family -SMD 5 General data Product Name Mica 2.4 GHz Article No. 3030A5645-01 Frequency 2.4-2.5 GHz Polarization Linear Operating temperature -40 to + 85 degC Impedance 50 Ohm Weight 0.4 gram Antenna type SMD 6 Electrical characteristics Characteristics Min Typ Max Peak Gain 0.8 dBi 1.2 dBi 1.9 dBi Efficiency 70% 75% 79% VSWR 1.0:1 1.5:1 1.9:1 Conditions* Frequency 2.4-2.5 GHz, Measured in 3D chamber ( near field) Frequency 2.4-2.5 GHz, Measured in Network Analyzer *Note all data provided in this table are based on the gigaNOVA™ reference board 7 Electrical performance VSWR * HP9770 Network Analyzer 3:1 2:1 1:1 2.4 2.45 2.5 GHz Integrated Antenna Solutions  Product Specification FE010315-G Mica 2.4 GHz SMD Antenna 7-2 3D-Radiation 2.74 -2.27 25 20 15 -7.28 10 Z 5 0 -12.3 -5 -10 -15 -17.31 -20 20 10 Y --22.33 20 0 10 0 -10 -10 -20 -30 -20 X dBi -27.34 7-3 Radiation patterns XY- Plane XZ- Plane YZ- Plane Total Polarization Vertical Polarization Horizontal Polarization Integrated Antenna Solutions  Product Specification FE010315-G Mica 2.4 GHz SMD Antenna 8 Antenna Dimensions L W H G F S1, S2 I J Length Width Height Ground Feed Solder Feed Feed 20.5 ±0.2 3.6 ±0.1 3.3±0.2 1.2±0.1 1.2±0.1 1.2±0.1 3.2±0.1 0.55±0.25 K L M N 1.0±0.1 5.5±0.1 7.7±0.1 0.2±0.1 Dimensions in millimeters. 9 Antenna Foot print K G S L F S2 M O P I Copper area Soldering pads Transparent area G F S1 S2 Ground Feed Solder Solder 1.2±0.1 1.2±0.1 1.2±0.1 1.2±0.1 I K L M O P 3.2±0.1 1.0±0.1 5.5±0.1 7.7±0.1 0.5±0.1 0.5±0.1 Dimensions in millimeters. Integrated Antenna Solutions  Product Specification FE010315-G Mica 2.4 GHz SMD Antenna 10 Electrical interface 10-1 Transmission line and matching The matching network has to be individually designed using one, two or three components. t, w = Unique dimensioning according to your PCB * C = Inductor and capacitor values according to your specific device* * Antenova provides this service upon request 10-2 Test board dimensions The testboard is designed for evaluation purposes for Mica 2.4 GHz SMD antenna. The board has the same size as a typical PCMCIA card and is fitted with an SMA connector. Integrated Antenna Solutions  Product Specification FE010315-G Mica 2.4 GHz SMD Antenna 10-3 Test board matching Series resistor 0 Ohm The testboard is matched with above specified component. Note! The component value(s) will vary depending on size of PCB, surrounding components etc. 11 Soldering 11-1 Recommended soldering conditions 11-2 Leadfree soldering The antenna has been tested and approved for leadfree soldering. The reflow curve and solder paste used is listed below. Solder paste: KOKI S3X58-M405 Integrated Antenna Solutions  Product Specification FE010315-G Mica 2.4 GHz SMD Antenna 12 Reliability 12-1 Temperature and Humidity Item Standard Operating temperature Temperature cycling EN/IEC 60068-2-2, Test Bd: Dry heat EN/IEC 60068-2-14, Test Na: Change of temperature Storage life EN/IEC 60068-2-1, Humidity Test Ca: Damp heat Storage life EN/IEC 60068-2-1, Low temperature Test Ad: Cold Storage life EN/IEC 60068-2-2, High temperature Test Bb: Dry heat Low High Duration -30 degC +90 degC - -40 degC +90 degC 500 cycles /10 min +60 degC / 90% RH 500 h - -55 degC - 500 h +125 degC 500 h 12-2 Mechanical Item Bending Standard Test Ue1: Bending Duration with support at end of PCB 1mm depth on reference board Force of 5 N applied to the side of the antenna. Test Ue3: Shear Dummy weight: 150g Drop test Vibration High Bending 1 mm at a rate of 1 mm/s IEC 60068-2-21, IEC 60068-2-21, Shear Low One drop at each side, total drops: 6 Height: 170cm EN/IEC 60068-2-6, Test Fc (sinusoidal) Acceleration spectral density:10-1000Hz Acceleration: 20m/s2 5 cycles per axis Number of axes: 3 mutually perpendicular 12-3 Miscellaneous Item Solderability Standard EN/IEC 60068-2-58, Test Td Low High Duration Visual inspection of soldering pads. Estimation of how many % of the pads that are well tin plated. Integrated Antenna Solutions  Product Specification FE010315-G Mica 2.4 GHz SMD Antenna 12-4 Judgement standard The judgement of the above tests should be made as follows: 1. Visual inspection - Normal apperance with no obvious cracking, peeling-off. 2. Electrical inspection - The DUT satisfies the VSWR specification throughout the 2.4-2.5 GHz band. 13 Hazardous Material Regulation Conformance Cadmium and cadmium compound. Lead and lead compound Organic brominated compound (PBB, PBDE) Mercury and mercury compound Polychlorinated biphenyl (PCB) Sexivalent chrome compound Polychlorinated naphthalene (PCN) Chlorinated paraffin (CP) Organic tin compound Mirex Asbestos Formaldehyde Azo compound Tetra-bromo-bisphenol-A-bis (TBBP-A-bis) 14 Application example 5 4 3 6  Front Surface Back Surface C 2.4 GHz Module C 2 C t W Strip line h Ground No crossing strip lines 7 7 General The antenna is of a quarter wave type and is dependent on the groundplane area to complete the antenna function. The antenna performance is also dependent on the size of the groundplane. 1. Placement of the antenna The antenna shall be placed on a groundplane area, preferably at the edge of the PCB oriented as above. 2. Placement of 2.4 GHz module To avoid losses in the strip line, the module shall be placed as close to the antenna as possible. 3. Strip line The strip line must be dimensioned according to your specific PCB. ( see fig 1). No crossing strip lines are allowed between the strip line and its ground plane. 4. Via connections To avoid spurious effects, via connections must be made to analogue ground. Integrated Antenna Solutions  Product Specification FE010315-G Mica 2.4 GHz SMD Antenna 5. Component matching Component values are depending on antenna placement, PCB dimensions and location of other components. 6. DC Block Might be needed depending on RF Module configuration. 7. Clearance Front surface: Minimum clearance to other components, C = 2-5 mm. Back surface: Components allowed. 8. Casing material No metal casing or plastics using metal flakes shall be used, avoid also metallic based paint or laquer. Note ! Incorrect implementation of the antenna will affect the performance. Contact Antenova for implementation services. 15 Packaging 15-1 Shelf storage recommendation Temperature -10 to +40 degree C Humidity Less than 75% RH Shelf Life 18 Months Storage place Away from corrosive gas and direct sunlight 15-2 Tape characteristics W S0 F E1 P0 P1 P2 A0 B0 K0 T D0 D1 32±0.3 28.4±0.3 14.2±0.1 1.75±0.1 4.0±0.1 8.0±0.1 2.0±0.1 4.0±0.1 21±0.1 3.7±0.1 0.3±0.05 1.5±0.1 Min 2.0 Dimensions in millimeters Quantity Leading space Trailing space 2000 Pcs / reel 50 blank antenna holders 37 blank antenna holders Integrated Antenna Solutions 10 Product Specification FE010315-G Mica 2.4 GHz SMD Antenna 15-3 Reel dimension Material: Conductive Polystyrene Width [mm] W: 32 Reel dia [mm] D: 330(13”) Hub dia [mm] H: 100(4”) Shaft dia [mm] C: 13 15-4 Box dimension antenova ® Antenova Material:  Cardboard Width [mm] W: 345 Breadth [mm] B: 345 Thickness [mm] H: 45 15-5 Bag properties Antistatic Aluminium Moisture Barrier Bag Thickness [mil] T: 3.2 15-6 Reel label information antenova ® Antenova Integrated Antenna Solutions 11 Product Specification FE010315-G www.antenova.com Corporate Headquarters Asia Headquarters Antenova Ltd. Far Field House Albert Road Stow-cum-Quy Cambridge CB9 5AR Antenova Asia Ltd. 3F, No 10, Alley 6, Lane 45 Poa Shing Road Hsin Tien City Taipe County ROC 23145 Tel: +44 (0) 1223 810600 Fax: +44 (0) 1223 810650 Email: info@antenova.com Tel: +886 (0) 2 2917 6536 Fax: +886 (0) 2 2910 6546 Email: info@antenova.com Sales Offices Europe Charlotta Olander UK/EU Sales Manager America David Nuti NA Sales Manager Tel: +46 702 913731 Tel: +1 214 668 0357 Email: Lotta.Olander@antenova.com Email: David.Nuti@antenova.com Asia CL Lim VP Sales Asia Tel: +886 (0) 931 201 318 Email: CL.Lim@antenova.com Integrated Antenna Solutions 12 Product Specification FE010315-G