CMS69273P-30NF

6 5 4 3 1 2 REVISIONS REV. ECR# ZONE AA D DESCRIPTION CHANGED BY/DATE APPROVED BY/DATE INITIAL RELEASE MJM 10/15/13 ER 10/15/13 F1 ECN-IAS02069 CHANGE PER IAS-ENG-001 UPDATED PIM LEVEL MJM 2FEB14 ER 2FEB14 F2 ECN-IAS2403 CHANGED MOUNTING CONFIGURATION MJM 10JUN14 SJ 10JUN14 D 186.4 B.C. FLAT WASHER C C SPRING WASHER NUT 75 120° 3/4" - 16 THREAD B B 86 198.8 #6 x 1-1/4" MOUNTING SCREWS AND ANCHORS THIRD ANGLE PROJECTION MATERIAL: SEE BOM MANCHESTER, NH 03103 USA FINISH: A The component(s), including any plating, finishes, coatings, chemicals and surfaces treatments, supplied in this document/drawing must conform and comply with the latest issue of Laird Technologies Specification LT-GES-001, which fully includes but is not limited to all contents of EU Directives 2002/95/EC (RoHS Directive), as well as includes requirements of the Joint Industry Guide standard JIG-101, April 2005. The component(s) in this document/drawing may be subject to a full compound analysis for proof of compliance. The latest issue of Laird Technologies Specification LT-GES-001, (General Specification for the Environment) is readily available upon request from the supplier. DO NOT SCALE DRAWING APPROVALS 6 5 DRAWN BY M.McGINNIS 10OCT13 PROJ. ENG. W. CHANG 10OCT13 APPL. MECH. E.RUSSELL UNLESS OTHERWISE NOTED, THIS DOCUMENT CONTAINS LAIRD TECHNOLOGIES CONFIDENTIAL INFORMATION. REPRODUCTION, USE, DISCLOSURE OR TRANSMITTAL OF ALL OR ANY PART OF THIS DOCUMENT IS PROHIBITED EXCEPT TO THE EXTENT APPROVED IN WRITING BY AN AUTHORIZED REPRESENTATIVE OF LAIRD TECHNOLOGIES. LAIRD TECHNOLOGIES RESERVES ALL RIGHTS UNDER PATENTS, TRADEMARKS, COPY RIGHTS AND TRADE SECRETS. COPYRIGHT, LAIRD TECHNOLOGIES 2010, ALL RIGHTS RESERVED. DATE MFG. B.THATCHER INTERPRET DIMENSIONING AND TOLERANCING IN ACCORDANCE WITH ASME Y14.5M-2009 TOLERANCES UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS 10OCT13 10OCT13 ANGLE: 0 PLACE DECIMAL: 1 PLACE DECIMAL: 2 PLACE DECIMAL: SURFACE ROUGHNESS 4 3 30' 0.5 0.25 0.13 1.6 TITLE: CMS69273P ASSEMBLY DRAWING SIZE DWG. NO. A3 CMS69273P-30NFMO SCALE: 1:5 2 REV F2 SHEET 1 OF 1 PREVIOUS# 1 A