PEL90201-10UFL

Circularly Polarized RFID Embedded Antenna PEL90201 902 TO 928 MHz RFID PANEL ANTENNA The Laird PEL90201 antenna is a circularly polarized panel antenna that provides reception and transmission of signals in the 902 – 928 MHz (US frequency band). Laird’s industry renowned design methodology achieves maximum efficiency and performance across the entire frequency band. Both VSWR and axial ratios are both excellent and allow the user to achieve the maximum performance for an antenna of this type. This embedded antenna comes with a wide range of connector and cable options. FEATURES MARKETS • Extremely low VSWR and axial ratio • US band and Europe band available • Wide range of connector and cable options • • • • • Warehouse Distribution center Airports and hospitals Transit terminals Conveyer belt SPECIFICATIONS PARAMETER PERFORMANCE PERFORMANCE Vendor Part Number PEL90201-10UFL PEL90201-10RMXP U.FL MCX Connector Type Cable Type Antenna Type Cable Length (cm) Operating Frequency Range VSWR Max Maximum Gain (dBiC) Asia: +86.21.5855.0827.127 IAS-AsiaSales@lairdtech.com www.lairdtech.com MMCX 1.37 mm RG316 RG316 Directional Directional 10 10 10 902 - 928 MHz 902 - 928 MHz 902 - 928 MHz 1.4.1 1.4:1 1.4:1 2.0 2.0 2.0 Theta 90 TYP 3 dB beam width (deg) 120° 120° 120° Phil 90 TYP 3 dB Beam width (deg) 120° 120° 120° Front to Back 4.0 4.0 4.0 Polarization LHCP LHCP LHCP Axial Ratio (TYP) 2 (TYP) 2 (TYP) 2 Mounting Style Europe: +44.1628.858941 IAS-EUSales@lairdtech.com PEL90201-10RAMP Directional 74m x 74mm x 9.48mm Dimensions Americas: +1.847 839.6907 IAS-AmericasEastSales@lairdtech.com PERFORMANCE Embedded Embedded Embedded Circularly Polarized RFID Embedded Antenna PEL90201 PATTERNS 902 MHz 915 MHz 928 MHz Theta 90° Theta 90° Theta 90° Phi 0° Phi 0° Phi 0° ORDERING GUIDE PART NO. SPECIFICATIONS PEL90201-10UFL 902-928 MHz panel, LHCP, 2 dBic, EMBD, 10 cm, U.FL PEL90201-10RMXP 902-928 MHz panel, LHCP, 2 dBic, EMBD, 10 cm, MCX PEL90201-10RAMP 902-928 MHz panel, LHCP, 2 dBic, EMBD, 10 cm, MMCX ANT-DS-PEL90201 0115 Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trade marks or registered trade marks of Laird Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.