SE880GPSR22R003

J upite r SE880 Pr oduct De s cr iption 80417ST10119a r2 – 2014-06-10 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 APPLICABILITY TABLE P RODUCT J upite r SE880 Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 2 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Notice While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Telit does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others. It is possible that this publication may contain references to, or information about Telit products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Telit intends to announce such Telit products, programming, or services in your country. Copyrights This instruction manual and the Telit products described in this instruction manual may be, include or describe copyrighted Telit material, such as computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Telit and its licensors contained herein or in the Telit products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit, as arises by operation of law in the sale of a product. Computer Software Copyrights The Telit and 3rd Party supplied Software (SW) products described in this instruction manual may include copyrighted Telit and other 3rd Party supplied computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW computer programs contained in the Telit products described in this instruction manual may not be copied (reverse engineered) or reproduced in any manner without the express written permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit or other 3rd Party supplied SW, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product. Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 3 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 Usage and Disclosure Restrictions License Agreements The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement. Copyrighted Materials Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Telit High Risk Materials Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities. Trademarks TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service names are the property of their respective owners. Copyright © Telit Communications S.p.A. 2014. Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 4 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 Conte nts 1. 2. 3. 4. 5. Intr oduction ........................................................................................................... 7 1.1. Scope ............................................................................................................................ 7 1.2. Audience ....................................................................................................................... 7 1.3. Contact Inform ation, Support ...................................................................................... 7 1.4. Docum ent Organization ............................................................................................... 8 1.5. Text Conventions .......................................................................................................... 8 1.6. Related Docum ents ..................................................................................................... 8 Ove r vie w .............................................................................................................. 10 2.1. SE880 key benefits /features ...................................................................................... 11 2.2. SE880 SiP 3D Technology .......................................................................................... 12 2.3. Internal Block Diagram ............................................................................................. 13 2.4. Dim ens ions ................................................................................................................ 13 2.5. J upiter SE880 m inim al external BOM ....................................................................... 14 Ge ne r a l pr oduct de s cr iption ................................................................................. 15 3.1. Main Features ............................................................................................................ 15 3.2. SE880 Specifications .................................................................................................. 16 3.2.1. General ........................................................................................................................... 16 3.2.2. DC Electrical Characteris tics ......................................................................................... 17 Envir onm e nta l r e quir e m e nts ............................................................................... 18 4.1. Tem perature range .................................................................................................... 18 4.2. RoHS compliance ....................................................................................................... 18 SE880 Cha r a cte r is tics .......................................................................................... 19 5.1. Power Supply ............................................................................................................. 19 5.1.1. 5.2. Ps eudo Battery Back-up ................................................................................................ 19 Power Managem ent ................................................................................................... 19 5.2.1. Hibernate State .............................................................................................................. 20 5.2.2. Micro Power Mode ......................................................................................................... 20 5.2.3. Adaptive Trickle Power (ATP) ........................................................................................ 20 5.2.4. Advanced Power Managem ent (APM)............................................................................ 20 Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 5 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 5.2.5. 5.3. Pus h to Fix Mode (PTF) .................................................................................................. 20 Differential Aiding ...................................................................................................... 21 5.3.1. Satellite Bas ed Augmentation Sys tems (SBAS) ............................................................ 21 5.4. Tim e Mark Puls e (1PPS) ............................................................................................ 21 5.5. Interfaces ................................................................................................................... 22 5.5.1. Main Serial Interface configuration ............................................................................... 22 5.5.2. NMEA Output Mes s ages ................................................................................................ 23 5.5.3. SiRF OSP Output Mes s ages ........................................................................................... 23 5.5.4. Auxiliary Serial Interface ............................................................................................... 24 5.5.5. External Antenna Connection ........................................................................................ 24 5.6. Functions and Capabilities ........................................................................................ 24 5.7. J upiter SE 880 Pin out ................................................................................................ 26 5.7.1. 6. Pinout Des cription ......................................................................................................... 26 Mounting SE880 on your boa r d ............................................................................. 29 6.1. General ....................................................................................................................... 29 6.2. Packing Sys tem .......................................................................................................... 29 7. Confor m ity As s e s s m e nt ....................................................................................... 30 7.1. EC Declaration of Conform ity .................................................................................... 30 8. SE880 EVK: Eva lua tion Kit .................................................................................... 31 9. SE880 RDK: Re fe r e nce De s ign Kit ........................................................................ 32 10. Sa fe ty Re com m e nda tions .................................................................................. 33 11. Docum e nt His tor y ............................................................................................. 34 Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 6 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 1. Introduction 1.1. Scope This document describes the main functionality of the Jupiter SE880 GPS Receiver. The information in this document is subject to change without notice and describes only generally the product defined in the introduction of this documentation. 1.2. Audie nce This document is intended for customers and developer who are about to develop an application based on Jupiter SE880. 1.3. Conta ct Infor m a tion, Suppor t For general contact, technical support, to report documentation errors and to order manuals, contact Telit Technical Support Center (TTSC) at: TS-EMEA@telit.com TS-NORTHAMERICA@telit.com TS-LATINAMERICA@telit.com TS-APAC@telit.com Alternatively, use: http://www.telit.com/en/products/technical-support-center/contact.php For detailed information about where you can buy the Telit modules or for recommendations on accessories and components visit: http://www.telit.com To register for product news and announcements or for product questions contact Telit Technical Support Center (TTSC). Our aim is to make this guide as helpful as possible. Keep us informed of your comments and suggestions for improvements. Telit appreciates feedback from the users of our information. Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 7 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 1.4. Docum e nt Or ga niza tion This document contains the following chapters : Chapter 1: “Introduction” provides a scope for this document, target audience, contact and support information, and text conventions. Chapter 2: “Overview” gives an overview of the features of the product. Chapter 3: “General Product description” describes in details the characteristics of the product. Chapter 4: “Environmental requirements” deals about environmental spec. Chapter 5: “SE880 Characteristics” gives an overview of the product’s characteristics including power supply, communication ports and pinout. Chapter 6: “Mounting on your board” describes how to handle the deive and its packaging system. Chapter 7: “Conformity Assessment” provides overview about product assessments. Chapter 8: “Evaluation Kit” provides a scope an overview about the SE880 Evaluation kit. Chapter 9: “Reference Design Kit” provides a scope an overview about the SE880 Reference kit Chapter 10: “Conformity Assessment Issues” provides some fundamental hints about the conformity assessment that the final application might need. Chapter 11: “Safety Recommendation” provides some safety recommendations that must be follow by the customer in the design of the application that makes use of the AA99-XXX. 1.5. Te xt Conve ntions Danger – This information MUST be followed or catastrophic equipment failure or bodily injury may occur. Caution or Warning – Alerts the user to important points about integrating the module, if these points are not followed, the module and end user equipment may fail or malfunction. Tip or Information – Provides advice and suggestions that may be useful when integrating the module. All dates are in ISO 8601 format, i.e. YYYY-MM-DD. 1.6. Re la te d Docum e nts  Jupiter SE880 Hardware User Guide  Jupiter SE880 EVK User Guide Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 8 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10  Jupiter SE880 Ref Design User Guide Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 9 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 2. Ove r vie w The Telit’s Jupiter SE880 is the world smallest, turnkey GPS SiP navigation solution in a 4.7 x 4.7 x 1.4 mm package, incorporating significant feature additions to and performance improvements on predecessor SiRFstarIV receiver functionality. The miniature 4.7x4.7mm LGA (Land Grid Array), SiRFstarIV™-based receiver module employs leading 3-D component embedding technology to achieve best-in-class performance in all dimensions critical for regular or size-constrained GPS applications. The receiver module was conceived to shorten Time-to-Market and to make the chipset-versus-module decision an easy one to make for device integrators. Integrators can attain a working -based design in as little as a week versus several months when starting from a chipset reference design. Telit’s Jupiter includes all components necessary for a fully functioning receiver design requiring only a 32 KHz external crystal for its time-base and TCXO to complete the design, along with antenna, power and data connections adequate to the integrator’s needs. For advanced designs incorporating the supported Satellite Based Augmentation System (SBAS), ephemeris data collected from the satellites can be stored to SPI Flash memory instead of the more common and expensive alternative of the EEPROM - again reducing costs and improving the business case for the end-device. Responsible for delivering the device’s best-in-class sensitivity, the Jupiter ’s RF front-end is truly state of the art employing spatially calibrated waveguide-quality radio paths inside the three-dimensional space of its architecture drastically reducing parasitic impedances characteristic of traditional 2-D RF designs. Inside, a multi-filter system includes not only the traditional SAW filters typical in GPS receiver designs but also a 2.4 GHz notch-filter capable of nullifying the jamming effects of high-energy radio devices such as Wi-Fi hot-spots, Bluetooth systems, cordless phones, and others, which greatly affect a GPS receiver’s ability to resolve timid satellite signals in the hostile radio environment where they need to operate. Jupiter SE880 is a single-constellation GPS product enhanced for maximum sensitivity which makes it capable of class-unique achievements such as a one-satellite acquisition of UTC (typically 4 are required); fix acquisition with minimal sky-visibility – indoors, garages, urban canyons, etc.; and much lower. In its micro-power stand-by mode, the draws a low 50 to 500 µAmps making it extremely battery-power friendly. SE880 lowers system costs and risk, while delivering state of the art GPS performance with as few as five external components (TCXO, RTC and three cap) with space requirement as little as 38 mm2. SE880 is carefully designed on all I/O assignment to simplify PCB layout and noise suppression on a 2-layers PCB integration capability for further cost saving. Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 10 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 2.1. SE880 ke y be ne fits / fe a tur e s The SE880 provide customers the following benefits:  The solution cost and footprint are significantly reduced (less than 40mm2) compared to chipset implementation and conventional module technology.  The SE880’s advanced 3D SiP technology allows best-in-class TTFF and in-door sensitivity.  The deeply integrated SAW filter and 2.4GHz notch filter greatly enhanced location accuracy by removing unwanted noise power in the most crowded frequency spectrums.  The SE880 supports assisted ephemeris file injection (A-GPS) as well as Satellite Based Augmentation System (SBAS).  “1 SV Fast Time Setting” for watch and clock applications.  Provides internal data logging feature with SPI Flash memory.  Enables ultra compact and effective antenna integration (passive patch, chip, printed or conformal antenna) in a very small space with a 2-layers PCB.  Very quick turn-around time with minimal BOM of TCXO, 32kHz crystal, and a few passive.  Telit SE880 bundled with a Telit cellular module represents the ideal Wireless+GPS solution in terms of total cost effectiveness, footprint solution, integration and timeto-market readiness. Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 11 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 2.2. SE880 SiP 3D Te chnology The Jupiter SE880 is a 3D SiP (System in Package) device. the 3D technology allows to embed active and passive components into the PCB. SiP means the integration of several integrated circuits and components of various technologies in a single package, resulting in one or several electronic systems. SiP Concept 3D PCB package 3D SiP key benefits are :  Miniaturization  Functional performance improvement  Combination of several functions  Excellent electrical by low inductances  Excellent thermal performance (top and back side heat transfer)  Embedded EMI shield  Cost reduction  Speed-to-market due to the reuse of existing ICs  Complete system integration Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 12 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 2.3. Inte r na l Block Dia gr a m 2.4. Dim e ns ions The Telit Jupiter module overall dimensions are:  Length: 4.7mm  Width: 4.7 mm  Thickness: 1.4 mm  Weight 0.04 g Note: Bottom view in mm Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 13 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 2.5. J upite r SE880 m inim a l e xte r na l BOM The Jupiter SE880 requires two external reference clocks:  16.369MHz TCXO  32.768kHz (XTal) antenna and a 1.8V always ON supply. Supply can be a 1.8V supply that is backed up by a very low current 1.8V LDO that will supply the 20uA typical when the GPS has been shut down into Hibernate mode. An EEPROM / SPI Flash memory can be added in order to store CGEE and/or SW patches. Jupiter SE880 Reproduction forbidden without written authorization from Telit Com m unications S.p.A. - All Rights Res erved. Mod. 0808 2011- 07 Rev.2 Page 14 of 34 J upite r SE880 P r oduct De s cr iption 80417ST10119a r2 – 2014-06-10 3. Ge ne r a l product de s cr iption 3.1. Ma in Fe a tur e s Jupiter includes a high performing SiRF Star IV GPS chipset (ROM) in a 3D PCB technology ensuring top-level performances at the lower integration cost. Min features are:  Ultra high sensitivity frontend without the need of active antenna  High-sensitivity navigation engine (PVT) tracks as low as -165dBm  48 track verification channels  SBAS (WAAS, EGNOS, QZSS and others)  Adaptive Micropower Controller: o Only 50 to 500μA maintains hot start capability o