600404

UHF RFID Inlays AD-317iL direct attach Dimensions: Common Applications: Apparel and Retail Jewelry Operating Frequency: Global (860 - 960MHz) RF Protocol: ISO-18000-6C, EPC Class 1 Gen 2 Chip: NXP UCODE G2iL EPC Memory: 128 bit TID Memory: 64 bit Tag IDentifier (TID) including 32 bit factory locked unique 866-903- RFID (7343) / rfid.info@averydennison.com Part Number 600404 600405 Format Dry Inlay Wet (pressure- sensitive) Inlay Antenna dimensions (CDxMD) 1.63 x 0.63 in [41.4 x 16 mm] 1.63 x 0.63 in [41.4 x 16 mm] Die- cut dimensions N/ A 1.75 x 0.75 in [44.45 x 19.05 mm] Inlay substrate material PET PET Inlay- to- liner adhesive N/ A S-490 (FASSON) Liner material N/ A 1.5M Clear PET Face sheet N/ A N/ A Standard pitch 1.5 in [38.1 mm] 1.5 in [38.1 mm] Standard web width 2.0 in [50.8 mm] 2.0 in [50.8 mm] Total thickness over chip 10 -13 mils [254 - 330.2 microns] 14 -17 mils [356 - 431.8 microns] Operating temperature -40 to 185 F [-40 to 85 C] -40 to 185 F [-40 to 85 C] RoHS EU Directive 2011/65/ EU Compliant EU Directive 2011/65/ EU Compliant Quality assurance Compliant 100% read tested with out- of tolerance Compliant 100% read tested with out- of tolerance inlay marked inlay marked Un- wind direction Inlay - side Out Inlay - side Out Core size with adaptor insert 3 in [76.2mm] 3 in [76.2 mm] Maximum roll outer diameter (not to exceed) 15.38in [390.65 mm] 13 in [330.2 mm] Average # of units per roll 12,000 12,000 Rev 00 00 CARE AND HANDLING RFID inlays are sensitive to ESD. Observe standard practices to keep environmental static charge to a minimum. APPLICATIONS This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. WARRANTY Please refer to Avery Dennison RFID standard terms and conditions. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data. PRODUCT CHANGES Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. TRADEMARK STATEMENT Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com. © 2014 Avery Dennison Inc. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342