SP-IB-NV-KIT

S KYE M ODULE N OVA I NTERFACE B OARD D ATASHEET VERSION 031615 SkyeModule Nova Interface Board Datasheet Page | 2 COPYRIGHT INFORMATION: Copyright 2015 SkyeTek, Inc., 1732 Wazee St. Suite 202, Denver, Colorado 80202, U.S.A. All rights reserved. Version 031615 This product or document is protected by copyright and distributed under licenses restricting its use, copying, distribution, and decompilation. No part of this product or document may be reproduced in any form by any means without prior written authorization of SkyeTek and its licensors, if any. SkyeTek and SkyeWare are trademarks or registered trademarks of SkyeTek, Inc. MIFARE and NXP is a registered trademark of Royal Philips Electronics. MicroSoft and Windows are registered trademarks of Microsoft Corporation. TECHNICAL SUPPORT AND CONTACT  I NFORMATION SkyeTek, Inc. 1415 Larimer St, Suite 207 Denver, CO 80202 http://www.skyetek.com SALES: sales@skyetek.com TECHNICAL SUPPORT: support@skyetek.com Main 720.328.3425 Fax:720.228.2400 Skyetek Inc 1415 Larimer Street, Suite 207 Denver, CO 80202 www.skyetek.com SkyeModule Nova Interface Board Datasheet Page | 3 TABLE OF CONTENTS 1   REVISION  HISTORY  ........................................................................................................................................  4   2   ORDERING  INFORMATION   ............................................................................................................................  4   2.1   NOVA  INTERFACE  BOARD  STANDARD  PART  NUMBERS  ................................................................................................  4   2.2   PART  NUMBER  DETAILS  ........................................................................................................................................  5   2.3   HOW  TO  BUY  ......................................................................................................................................................  5   3   NOVA  INTERFACE  BOARD  OVERVIEW  ............................................................................................................  6   3.1   DESCRIPTION  ....................................................................................................................................................  6   3.2   AGENCY  APPROVALS  ............................................................................................................................................  6   4   MECHANICAL  SPECIFICATIONS  ......................................................................................................................  6   5   PINNING  INFORMATION  ................................................................................................................................  8   5.1   CONNECTOR  DESCRIPTIONS  ...................................................................................................................................  8   5.2   HOST  INTERFACE  CONNECTOR  PIN  MAPPING  ............................................................................................................  9   LIST OF FIGURES Figure 2-1: SkyeTek Part Number Format............................................................................................ 5   Figure 4-1: SP-IB-NV Mechanical Drawing ........................................................................................... 7   Figure 5-1: Host Interface Connector Pin Numbering ........................................................................... 9   LIST OF TABLES Table 1-1: Revision History ................................................................................................................ 4   Table 2-1: Nova Interface Board Standard Part Numbers ..................................................................... 4   Table 2-2: Pictures of Nova IB Options................................................................................................ 5   Table 2-3: Part Number Details .......................................................................................................... 5   Table 5-1: Nova Interface Board Connector Specification ..................................................................... 8   Table 5-2: Nova Interface Board Pin Descriptions ................................................................................ 9   Main 720.328.3425 Fax:720.228.2400 Skyetek Inc 1415 Larimer Street, Suite 207 Denver, CO 80202 www.skyetek.com SkyeModule Nova Interface Board Datasheet 1 Page | 4 Revision History Revision Author Change 031615 Steve Schneiter Initial release. Table 1-1: Revision History 2 2.1 Ordering Information Nova Interface Board Standard Part Numbers Part Number Description SP-IB-NV Nova Interface board, 24-pin connector NOT included SP-IB-NH Nova Interface board, 24-pin connector SOLDERED to board SP-IB-NV-KIT Nova Interface board, 24-pin connector INCLUDED SEPARATELY Table 2-1: Nova Interface Board Standard Part Numbers SP-IB-NV SP-IB-NH Nova Interface board, 24-pin connector NOT included Nova Interface board, 24-pin connector SOLDERED to board SP-IB-NV-KIT Nova Interface board, 24-pin connector INCLUDED SEPARATELY Main 720.328.3425 Fax:720.228.2400 Skyetek Inc 1415 Larimer Street, Suite 207 Denver, CO 80202 www.skyetek.com SkyeModule Nova Interface Board Datasheet Page | 5 Table 2-2: Pictures of Nova IB Options NOTE – The Nova will always communicate via USB, when a USB host is connected (i.e., if you connect to the USB connector on the Nova Interface Board, the Nova will not respond to communications sent to other pins.) 2.2 Part Number Details The Nova Interface Board part number is constructed according to the SkyeTek part number specification below: PF-­‐PT-­‐BT-­‐OPTS Op tio ns e yp  T ild e Bu yp t  T uc od ily Pr am t  F uc od Pr Figure 2-1: SkyeTek Part Number Format Code Options Description Product Family SP = SkyePlus Highest level product family code. Product Type IB = Interface Board Specifies the specific part type. Build Type NV = Nova Interface board Specifies hardware form factor. NH = Nova Interface board + 24-pin “MH” connector Options Blank = Standard KIT = Includes 24-pin “MH” connector, disconnected from board This field specifies additional options (such as “kit”) and can be further customized for special customer part numbers. Consult the SkyeTek sales team for custom orders. Table 2-3: Part Number Details 2.3 How to Buy SkyeTek products are distributed through a worldwide distribution network as well as directly through SkyeTek. For more information on how to purchase SkyeTek products in your area, please visit the How To Buy page on the SkyeTek website at SkyeTek.com/HowToBuy or email sales@skyetek.com. Main 720.328.3425 Fax:720.228.2400 Skyetek Inc 1415 Larimer Street, Suite 207 Denver, CO 80202 www.skyetek.com SkyeModule Nova Interface Board Datasheet 3 Page | 6 Nova Interface Board Overview 3.1 Description The SkyeModule Nova Interface board was designed with two goals in mind: 1. To provide a simple interface for new customers to test the SkyeModule Nova via various communication protocols and for various uses. 2. To provide a drop-in-compatible alternative to SkyeTek’s previous flagship UHF module, the M9-MH. The Nova Interface Board is the same form factor as the SkyeModule M9-MH. 3.2 Agency Approvals • • 4 RoHS 2 Manufactured according to ISO9001 and ISO13485 Mechanical Specifications Outside dimensions: 2.09 x 2.75 inches (53.0 mm x 70.0 mm) Mounting holes: • • 3.0 mm diameter 45.0 mm center-to-center (width) 40.0 mm center-to-center (length) Clearance: Approx 2.5 mm between edge of mounting hole and edge of printed circuit board (PCB) (width/side-to-side direction) Main 720.328.3425 Fax:720.228.2400 Skyetek Inc 1415 Larimer Street, Suite 207 Denver, CO 80202 www.skyetek.com SkyeModule Nova Interface Board Datasheet Page | 7 Figure 4-1: SP-IB-NV Mechanical Drawing (dimensions in inches) Main 720.328.3425 Fax:720.228.2400 Skyetek Inc 1415 Larimer Street, Suite 207 Denver, CO 80202 www.skyetek.com SkyeModule Nova Interface Board Datasheet 5 5.1 Page | 8 Pinning Information Connector Descriptions The SP-IB-NV is the standard version of the Nova Interface Board and has only the USB micro connector populated. The pins for the Hirose 24-pin connector are left un-populated for easier prototyping. The Nova Interface Board has one optional Connector Type Description Ref Des Man. Man. P/N Mating Connector Through hole 2mm, 12x2 24-pin Host interface connector J1 Hirose DF11-24DP-2DSA(24) DF11Z-24DS-2V USB Micro AB Receptacle USB host interface connector J01 FCI 10104111-0001LF USB Micro Plug U1 Molex 67910-1002 NA 52 pin Mini PCIe Nova Module to Nova Interface Board Connector Table 5-1: Nova Interface Board Connector Specification For more information on how to purchase SkyeTek products in your area, please visit the How To Buy page on the SkyeTek website at SkyeTek.com/HowToBuy. Main 720.328.3425 Fax:720.228.2400 Skyetek Inc 1415 Larimer Street, Suite 207 Denver, CO 80202 www.skyetek.com SkyeModule Nova Interface Board Datasheet 5.2 Page | 9 Host Interface Connector Pin Mapping The Nova Interface Board host connector is a 24-pin through-hole 2mm pitch part. As explained in the previous section, no connector is populated in location J1 in the standard version SP-IB-NV. The pin numbers are located as illustrated in Figure 5-1 below. The pin mappings and descriptions are shown in Table 5-2. Note that all unconnected pins should be left floating. Figure 5-1: Host Interface Connector Pin Numbering Pin Name Description I/O Pin Name Description I/O 1 GPIO0 User configurable GPIO I/O 2 RXD UART receive Input 3 GPIO1 User configurable GPIO I/O 4 TXD UART transmit Output 5 GPIO2 User configurable GPIO I/O 6 NC Not Connected N/A 7 GPIO3_DR User configurable GPIO, Data Ready (see SPI and I2C modes) I/O 8 N_DEEP_SLEEP Active low deep sleep. Iternally pulled high when unconnected (inactive). Input 9 VIN Input power supply pin Input 10 GND Ground Input 11 USB_DP USB positive I/O 12 SCL 2 Input 2 I C Clock 13 USB_DN USB negative I/O 14 SDA I C Data I/O 15 VIN Input power supply pin Input 16 GND Ground Input 17 3V3_OUT 3.3V supply output pin Output 18 MISO SPI master in, slave out Output 19 N_RESET Active low reset. Pulled high when unconnected (inactive). Input 20 MOSI SPI master out, slave in Input 21 NC Not Connected N/A 22 SCK SPI clock in Input 23 NC Not Connected N/A 24 SSEL SPI slave select Input Table 5-2: Nova Interface Board Pin Descriptions Main 720.328.3425 Fax:720.228.2400 Skyetek Inc 1415 Larimer Street, Suite 207 Denver, CO 80202 www.skyetek.com