1C5819.T

1C5817 1C5819 TECHNICAL DATA DATA SHEET D0075 REV. - SILICON SCHOTTKY RECTIFIER DIE Very Low Forward Voltage Drop Applications:  Switching Power Supply  Converters  Free-Wheeling Diodes  Polarity Protection Diode Features:        Soft Reverse Recovery at Low and High Temperature Very Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Electrically / Mechanically Stable during and after Packaging Maximum Ratings: Characteristics Peak Inverse Voltage 1C5817 1C5819 Average Forward Current Non-Repetitive Avalanche Energy Repetitive Avalanche Current Junction Temperature Storage Temperature Symbol Condition Max. Units VRWM - 20 45 V 1 A 2.6 mJ 0.18 A -55 to+125 -55 to+150 C C Condition @ 1A, Pulse, TJ = 25 C Max. 0.45 0.49 Units VF2 @ 0.1A, Pulse, TJ = 25 C 0.32 0.34 V IR1 TJ = 25 C @VR = 20V, Pulse, @VR = 45V, Pulse, TJ = 100 C @VR = 20V, Pulse, @VR = 45V, Pulse, @VR = 5V, TC = 25 C fSIG = 1MHz, VSIG = 50mV (p-p) 50 μA 5 mA 110 70 pF IO(AV) EAS IAR TJ Tstg 50% duty cycle, rectangular wave form TJ = 25C, IAS = 0.18 A, L = 160mH IAS decay linearly to 0 in 1μs limited by TJ max VA=1.5VR - Electrical Characteristics: Characteristics Forward Voltage Drop 1C5817 1C5819 1C5817 1C5819 Reverse Current Symbol VF1 IR2 Junction Capacitance 1C5817 1C5819 CT  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  V TECHNICAL DATA DATA SHEET D0075 REV. - 1C5817 1C5819 Mechanical Dimensions: In Inches (mm) Bottom side metalization Ag-30kA minimum B A Top side metalization Al - 25 kA minimum or Ag - 30 kA minimum. Bottom side is cathode, top side is anode Dimension H = 0.0105  0.001 (0.27  0.025) for Al top; Dimension H = 0.0155  0.001 (0.39  0.025) for Ag top. H A 0.039  0.002(0.99  0.05) Gold Option Available for Top and/or Bottom Metalization See Part Ordering Information below B 0.032  0.002(0.81  0.05) Default part number is Al top, Ag bottom. Add the following suffix for these metal combinations: Suffix Top Bottom Al Ag AG Al Au BB Ag Ag BG Ag Au GG Au Au GB Au Ag Part Number 1C5819 1C5819AG 1C5819BB 1C5819BG 1C5819GG 1C5819GB A = Ti (0.3 kA) / Al (25 kA) B = Ti (1.2 kA) / Ni (1.8 kA) / Ag (30kA) G = Ti (1.2 kA) / Ni (1.8 kA) / Au (12kA) (TOP) / Ti (1.2 kA) / Ni (1.8 kA) / Au (4kA) (BOTTOM) DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations..  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com 