P4KE68A

P4KE Series CREATEK Microelectronics Power TVS in DO-41 Features ■ ■ Glass passivated chip 400W peak pulse power(10/1000us) High accuracy, 5% tolerance Uni and Bidirectional unit Low clamping voltage Low Leakage current ■ Very fast response time ■ ■ ■ ■ Bidirectional 1 1 2 2 Mechanical Data ■ ■ ■ Case: DO-41 molded plastic Lead free; RoHS compliant Molding Compound Flammability Rating: UL 94 V-0 Terminals: High temperature soldering guaranteed: 260 °C/10 sec. at terminals Applications ■ ■ Computers Telecom system Industrial equipments Consumer electronic applications ■ Other VCC bus and I/O interfaces ■ ■ Unidirectional 1 1 2 2 Absolute Maximum Ratings Ratings at 25 °C, ambient temperature unless otherwise specified Symbol Parameter Peak pulse power dissipation with a 10/1000us waveform (1) Maximum peak reverse pulse current a 10/1000us waveform Peak forward surge current 8.3ms single half sine-wave (1) (2 ) Operating junction and storage temperature range Value Unit PPP 400 W I PP See Next Table A I FSM 40 A TJ, TSTG -55 to +150 ℃ Notes: 1.Non-repetitive current pulse,per Fi g.5 and detated above TA=25°C per Fig.1 2.Measured on 8.3ms single half sine-wave,or equivalent square wave,duty cycle=4 pulses per minute maximum Rev. 1.0 www.crea-tek.com 1 P4KE Series CREATEK Microelectronics Electrical Characteristics (TA = 25 °C unless otherwise specified) Part Number Direction Maximum Working Voltage VRWM (V) Maximum Reverse Current@VRWM IR max(uA) Breakdown Voltage@IT VBR min(V) VBR max(V) IT(mA) Peak Surge Current IPP (A) Maximum Clamping Voltage@IPP VC (V) P4KE6.8A Uni-Dir 5.80 1000 6.45 7.14 10 39.0 10.5 P4KE6.8CA Bi-Dir 5.80 1000 6.45 7.14 10 39.0 10.5 P4KE7.5A Uni-Dir 6.40 500 7.13 7.88 10 36.3 11.3 P4KE7.5CA Bi-Dir 6.40 500 7.13 7.88 10 36.3 11.3 P4KE8.2A Uni-Dir 7.02 200 7.79 8.61 10 33.9 12.1 P4KE8.2CA Bi-Dir 7.02 200 7.79 8.61 10 33.9 12.1 P4KE9.1A Uni-Dir 7.78 50 8.65 9.55 1 30.6 13.4 P4KE9.1CA Bi-Dir 7.78 50 8.65 9.55 1 30.6 13.4 P4KE10A Uni-Dir 8.55 10 9.50 10.50 1 28.3 14.5 P4KE10CA Bi-Dir 8.55 10 9.50 10.50 1 28.3 14.5 P4KE11A Uni-Dir 9.40 5 10.50 11.60 1 26.3 15.6 P4KE11CA Bi-Dir 9.40 5 10.50 11.60 1 26.3 15.6 P4KE12A Uni-Dir 10.20 5 11.40 12.60 1 24.6 16.7 P4KE12CA Bi-Dir 10.20 5 11.40 12.60 1 24.6 16.7 P4KE13A Uni-Dir 11.10 1 12.40 13.70 1 22.5 18.2 P4KE13CA Bi-Dir 11.10 1 12.40 13.70 1 22.5 18.2 P4KE15A Uni-Dir 12.80 1 14.30 15.80 1 19.3 21.2 P4KE15CA Bi-Dir 12.80 1 14.30 15.80 1 19.3 21.2 P4KE16A Uni-Dir 13.60 1 15.20 16.80 1 18.2 22.5 P4KE16CA Bi-Dir 13.60 1 15.20 16.80 1 18.2 22.5 P4KE18A Uni-Dir 15.30 1 17.10 18.90 1 16.1 25.2 P4KE18CA Bi-Dir 15.30 1 17.10 18.90 1 16.1 25.2 P4KE20A Uni-Dir 17.10 1 19.00 21.00 1 14.8 27.7 P4KE20CA Bi-Dir 17.10 1 19.00 21.00 1 14.8 27.7 P4KE22A Uni-Dir 18.80 1 20.90 23.10 1 13.4 30.6 P4KE22CA Bi-Dir 18.80 1 20.90 23.10 1 13.4 30.6 P4KE24A Uni-Dir 20.50 1 22.80 25.20 1 12.3 33.2 P4KE24CA Bi-Dir 20.50 1 22.80 25.20 1 12.3 33.2 P4KE27A Uni-Dir 23.10 1 25.70 28.40 1 10.9 37.5 P4KE27CA Bi-Dir 23.10 1 25.70 28.40 1 10.9 37.5 P4KE30A Uni-Dir 25.60 1 28.50 31.50 1 9.9 41.4 P4KE30CA Bi-Dir 25.60 1 28.50 31.50 1 9.9 41.4 P4KE33A Uni-Dir 28.20 1 31.40 34.70 1 9.0 45.7 P4KE33CA Bi-Dir 28.20 1 31.40 34.70 1 9.0 45.7 P4KE36A Uni-Dir 30.80 1 34.20 37.80 1 8.2 49.9 P4KE36CA Bi-Dir 30.80 1 34.20 37.80 1 8.2 49.9 P4KE39A Uni-Dir 33.30 1 37.10 41.00 1 7.6 53.9 P4KE39CA Bi-Dir 33.30 1 37.10 41.00 1 7.6 53.9 Rev. 1.0 www.crea-tek.com 2 P4KE Series CREATEK Microelectronics Part Number Direction Maximum Working Voltage VRWM (V) Maximum Reverse Current@VRWM IR max(uA) VBR min(V) VBR max(V) IT(mA) (A) Breakdown Voltage@IT Peak Surge Current IPP Maximum Clamping Voltage@IPP VC (V) P4KE43A Uni-Dir 36.80 1 40.90 45.20 1 6.9 59.3 P4KE43CA Bi-Dir 36.80 1 40.90 45.20 1 6.9 59.3 P4KE47A Uni-Dir 40.20 1 44.70 49.40 1 6.3 64.8 P4KE47CA Bi-Dir 40.20 1 44.70 49.40 1 6.3 64.8 P4KE51A Uni-Dir 43.60 1 48.50 53.60 1 5.8 70.1 P4KE51CA Bi-Dir 43.60 1 48.50 53.60 1 5.8 70.1 P4KE56A Uni-Dir 47.80 1 53.20 58.80 1 5.3 77.0 P4KE56CA Bi-Dir 47.80 1 53.20 58.80 1 5.3 77.0 P4KE62A Uni-Dir 53.00 1 58.90 65.10 1 4.8 85.0 P4KE62CA Bi-Dir 53.00 1 58.90 65.10 1 4.8 85.0 P4KE68A Uni-Dir 58.10 1 64.60 71.40 1 4.5 92.0 P4KE68CA Bi-Dir 58.10 1 64.60 71.40 1 4.5 92.0 P4KE75A Uni-Dir 64.10 1 71.30 78.80 1 4.0 103.0 P4KE75CA Bi-Dir 64.10 1 71.30 78.80 1 4.0 103.0 P4KE82A Uni-Dir 70.10 1 77.90 86.10 1 3.6 113.0 P4KE82CA Bi-Dir 70.10 1 77.90 86.10 1 3.6 113.0 P4KE91A Uni-Dir 77.80 1 86.50 95.50 1 3.3 125.0 P4KE91CA Bi-Dir 77.80 1 86.50 95.50 1 3.3 125.0 P4KE100A Uni-Dir 85.50 1 95.00 105.00 1 3.0 137.0 P4KE100CA Bi-Dir 85.50 1 95.00 105.00 1 3.0 137.0 P4KE110A Uni-Dir 94.00 1 105.00 116.00 1 2.7 152.0 P4KE110CA Bi-Dir 94.00 1 105.00 116.00 1 2.7 152.0 P4KE120A Uni-Dir 102.00 1 114.00 126.00 1 2.5 165.0 P4KE120CA Bi-Dir 102.00 1 114.00 126.00 1 2.5 165.0 P4KE130A Uni-Dir 111.00 1 124.00 137.00 1 2.3 179.0 P4KE130CA Bi-Dir 111.00 1 124.00 137.00 1 2.3 179.0 P4KE150A Uni-Dir 128.00 1 143.00 158.00 1 2.0 207.0 P4KE150CA Bi-Dir 128.00 1 143.00 158.00 1 2.0 207.0 P4KE160A Uni-Dir 136.00 1 152.00 168.00 1 1.9 219.0 P4KE160CA Bi-Dir 136.00 1 152.00 168.00 1 1.9 219.0 P4KE170A Uni-Dir 145.00 1 162.00 179.00 1 1.8 234.0 P4KE170CA Bi-Dir 145.00 1 162.00 179.00 1 1.8 234.0 P4KE180A Uni-Dir 154.00 1 171.00 189.00 1 1.7 246.0 P4KE180CA Bi-Dir 154.00 1 171.00 189.00 1 1.7 246.0 P4KE200A Uni-Dir 171.00 1 190.00 210.00 1 1.5 274.0 P4KE200CA Bi-Dir 171.00 1 190.00 210.00 1 1.5 274.0 P4KE220A Uni-Dir 185.00 1 209.00 231.00 1 1.3 328.0 P4KE220CA Bi-Dir 185.00 1 209.00 231.00 1 1.3 328.0 Rev. 1.0 www.crea-tek.com 3 P4KE Series CREATEK Microelectronics Part Number P4KE250A Direction Uni-Dir Maximum Working Voltage V RWM (V) Maximum Reverse Current@V RWM I R max(uA) VBR min(V) VBR max(V) IT(mA) (A) 214.00 1 237.00 263.00 1 1.2 344.00 Breakdown Voltage@IT Peak Surge Current IPP Maximum Clamping Voltage@IPP V C (V) P4KE250CA Bi-Dir 214.00 1 237.00 263.00 1 1.2 344.00 P4KE300A Uni-Dir 256.00 1 285.00 315.00 1 1.0 414.00 P4KE300CA Bi-Dir 256.00 1 285.00 315.00 1 1.0 414.00 P4KE350A Uni-Dir 300.00 1 332.00 368.00 1 0.9 482.00 P4KE350CA Bi-Dir 300.00 1 332.00 368.00 1 0.9 482.00 P4KE400A Uni-Dir 342.00 1 380.00 420.00 1 0.8 548.00 P4KE400CA Bi-Dir 342.00 1 380.00 420.00 1 0.8 548.00 P4KE440A Uni-Dir 376.00 1 418.00 462.00 1 0.7 602.00 P4KE440CA Bi-Dir 376.00 1 418.00 462.00 1 0.7 602.00 P4KE480A Uni-Dir 408.00 1 456.00 504.00 1 0.6 658.00 P4KE480CA Bi-Dir 408.00 1 456.00 504.00 1 0.6 658.00 P4KE510A Uni-Dir 434.00 1 485.00 535.00 1 0.6 698.00 P4KE510CA Bi-Dir 434.00 1 485.00 535.00 1 0.6 698.00 725.00 P4KE530A Uni-Dir 450.00 1 503.50 556.50 1 0.6 P4KE530CA Bi-Dir 450.00 1 503.50 556.50 1 0.6 725.00 P4KE540A Uni-Dir 459.00 1 513.00 567.00 1 0.5 740.00 P4KE540CA Bi-Dir 459.00 1 513.00 567.00 1 0.5 740.00 P4KE550A Uni-Dir 467.00 1 522.50 557.50 1 0.5 760.00 P4KE550CA Bi-Dir 467.00 1 522.50 557.50 1 0.5 760.00 Rev. 1.0 www.crea-tek.com 4 P4KE Series CREATEK Microelectronics Typical Characteristics (Tamb = 25 °C unless otherwise specified) Fig. 2 - Maximum Non-Repetitive Surge Current 50 1 Peak Forward Surge Current, (A) Peak Pulse Derating in Percentage of Peak Power or Current, (%) Fig. 1 - Pulse Derating Curve 100 75 50 25 40 8.3 ms Single Half Sine-Wave 120 30 20 10 0 0 0 25 50 75 100 125 150 175 200 Ambient Temperature ,TA (°C） 1 10 Number of Cycles at 60 Hz Fig. 3 - Steady State Power Derating Curve Fig. 4 - Peak Pulse Power Rating Curve 100 100 1.0 0.8 10 0.6 Peak Power (kW) Steady State Power Dissipation, (W) 300TJ = TJ max. 100 0.4 1 0.2 0.0 0.1 0 25 50 75 100 125 150 175 0.1 200 1 10 100 1000 10000 Pulse Width ,td (us) Lead Temperature , TL（°C） Fig. 5 - Pulse Waveform Fig. 6 - Typical Junction Capacitance 100000 Tr=10 us Peak Value (Ipp) ˇ ˇ 0.2 100 0.5 = Ipp 76 Half Value 2 1 50 1.5 33 10/1000 usec. 23 2 as defined by Waveform R.E.A. 3 13 4 10 50 td Bi-directional @zero bias ˆ 10000 Junction Capacitance,CJ (pF) Peak Pulse Current , (% ) 100 TJ = 25 °C Pulse Width (td) is defined as the point where the peak current 0 to 50 %0of Ipp decays Uni-directional @zero bias ˊ 1000 ˇ ˆ Uni-directional @VRWM 100 ˇ 10 Bi-directional @VRWM TJ=25 °C f=1.0MHz 1 1 0 0 1 2 3 4 10 1000 100 Reverse Breakdown Voltage,VBR (V) Time , (ms) Rev. 1.0 www.crea-tek.com 5 P4KE Series CREATEK Microelectronics Package Dimensions D C A B Dimensions A B C D A Milimeters Min Min M 25.4 4.1 5.2 0.85 0.54 2.0 2.7 Ordering information Order code Package Packaging option Base quantity Packaging specification P4KE Series DO-41 Tape and BOX 5000pcs / BOX EIA STD RS-481 Revision history Date Revision 23-May-2012 1.0 Rev. 1.0 Changes Initial release www.crea-tek.com 6 P4KE Series CREATEK Microelectronics CAUTION / WARNING Information in this document is believed to be accurate and reliable. However, CREATEK does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Users should independently evaluate the suitability of and test each product selected for their own applications, and CREATEK assumes no liability whatsoever relating to the choice, selection or use of the CREATEK products and services described herein. CREATEK reserves the right to change or update, without notice, any information contained in this publication; to change, without notice, the design, construction, processing, or specification of any product; and to discontinue or limit production or distribution of any product. Information in this document supersedes and replaces all information previously supplied. Products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an CREATEK product can reasonably be expected to result in personal injury, death or severe property or environmental damage. CREATEK accepts no liability for inclusion and/or use of CREATEK products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Resale of CREATEK products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by CREATEK for the CREATEK product or service described herein and shall not create or extend in any manner whatsoever, any liability of CREATEK. CREATEK expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. CREATEK only obligations are those in the CREATEK Standard Terms and Conditions of Sale and in no case will CREATEK be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products. Specifications are subject to change without notice © Copyright 2009,CREATEK Microelect onics ® is a registered trademark of CREATEK Microelectronics All rights reserved Rev. 1.0 www.crea-tek.com 7