RJX8MB

1 3 2 5 4 6 = CRITICAL INSPECTION DIMENSIONS. NOTES: DEVIATIONS FROM INITIAL APPROVED SAMPLES REV 1 MUST BE SUBMITTED FOR APPROVAL. A BY T.N APPR P.M DATE 08/08/12 ECN 9148 A ol Aus en S oH EU Co m R t ian pl 5 /E 0 2 / 95 n 18.4 20 n 19.0 DESCRIPTION FIRST ISSUE a li a n 21.2 8 tr 82.8 ZONE C = KEY PRODUCT CHARACTERISTICS Amp h LEGEND 7 REVISION HISTORY B B 4 SMALL CABLE CLAMP 62.9 3 C C 1 LARGE CABLE CLAMP 2 D RJX 8 M D BULK SHELL FINISH BLANK: NICKEL PLATE B: BLACK FINISH SERIES PREFIX E B CONTACT LAYOUT 8: RJ45 CABLE HOUSING PACKAGING BLANK: INDIVIDUAL BAG BULK: BULK PACKED GENDER M: MALE CABLE PLUG 5 50260014-530 CABLE CLAMP LARGE XLRnet 1 4 50260013-530 CABLE CLAMP SMALL XLRnet 1 3 50440043*-530 NUT XLRnet 1 2 53480101-*30 DIE CAST SHELL XLRnet 1 1 52520003-53* SLEEVE PLASTIC AX SERIES 1 ITEM PART NUMBER DESCRIPTION E QTY PARTS LIST F NOTES: 1. BOTH CABLE CLAMPS LARGE & SMALL ARE PACKED IN THE SAME BAG OF CONNECTOR KIT UNLESS OTHERWISE SPECIFIED TOLERANCE TO BE LINEAR ANGULAR X ± 0.5 X~ ±1 X.X ± 0.1 X.X' ± 30' X.XX ± 0.05 X.X'X " ± 15' BREAK ALL SHARP EDGES AND REMOVE ALL BURRS DO NOT SCALE THIS DOCUMENT IS THE PROPERTY OF AMPHENOL AUSTRALIA PTY. LTD. . NO PART THEREOF MAY BE REPRODUCED AND USED WITHOUT THE PRIOR WRITTEN CONSENT OF THE OWNER. MATERIAL: SEE COMPONENTS FINISH: SEE DIMENSIONS IN MILIMETRES 1 2 3 4 COMPONENTS THIRD ANGLE PROJECTION 5 DRN: T.N DATE: 08/08/12 CKD: P.M DATE: 09/08/12 APP'D: P.M DATE: 09/08/12 SCALE: 1:1 SIZE: A4 6 Amphenol TITLE: Amphenol Australia Pty.Ltd, 2 Fiveways Blvd, Keysborough, VIC 3173 XLRnet PLUG CABLE CONNECTOR 7 PART No: REV RJX8M* DRAWING No. 1 SHEET 55010849-000-1 CB4.17.F1 1/1 F