BCIHP0724-4R7M

(SMD Power Inductors) Powder Molding Type BCIHP0718/24/30/35/40/50-0940 Series ● Photograph picture BCIHP0718/24/30/35/40/50 ● Dimensions Recommend PC Board Pattern ITEM BCIHP0718-Series BCIHP0724-Series BCIHP0730-Series BCIHP0735-Series BCIHP0740-Series BCIHP0750-Series BCIHP0940-Series A(mm) 6.60±0.2 6.60±0.2 6.60±0.2 6.60±0.2 6.60±0.2 6.60±0.2 8.60±0.3 B(mm) 7.00±0.3 7.00±0.3 7.00±0.3 7.00±0.3 7.00±0.3 7.00±0.3 8.00±0.3 C(mm) 1.8MAX 2.4MAX 3.0MAX 3.5MAX 4.0MAX 5.0MAX 4.0MAX D(mm) 3.00±0.3 3.00±0.3 3.00±0.3 3.00±0.3 3.00±0.3 3.00±0.3 3.00±0.5 E(mm) F(mm) G(mm) H(mm) 1.60±0.3 7.55 3.35 2.40 1.60±0.3 7.55 3.35 2.40 1.60±0.3 7.55 3.35 2.40 1.60±0.3 7.55 3.35 2.40 1.60±0.3 7.55 3.35 2.40 1.60±0.3 7.55 3.35 2.40 1.60±0.3 9.60 5.30 4.80 ● Part Numbering BCIHP 0718 – 4R7 M A B C D A:Series(系列代號) B:Dimension(尺寸) B×C 4R7=4.7uH C:Inductance(電感值) D:Inductance Tolerance(電感值公差) M=±20% ● Features 1. 2. 3. 4. 5. Compliance with RoHs. Lowest DCR. Frequency range up to 5.0MHz. Handles high transient current spikes without saturation Ultra low buzz noise, due to composite construction. ● Applications 1. DC/DC converter for CPU in Notebook PC 2. Battery powered devices 3. Cellular phones LCD displays, HDDs, DVCs, DSCs, PDA etc. 4. Thin type on-board power supply module. TEL:+86-512-57823500 TAX:+86-512-57823503 ● 特點 1. 符合 RoHs. 2. 低電阻. 3. 頻率可達到 5.0 MHz. 4. 可處理在未飽和時的高瞬間電流. 5. 設計緊湊/超低噪音 ● 應用 1. 用於筆記本電腦處理器的 DC/DC 轉換設備. 2. 電源,電池設備. 3. 適用於手機液晶屏顯示,HDD, DVC, DSC, PDA 等. 4. 薄型車載電源模組. Cheng Yang Electronics Corp Ltd www.baocheng.biz 20 January 2015 TAPE BCIHP07-Series P: 1 / 11 (SMD Power Inductors) Powder Molding Type BCIHP0718/24/30/35/40/0940-Series ● Specification ITEM BCIHP0718-R10M BCIHP0718-R15M BCIHP0718-R22M BCIHP0718-R33M IHLP-2525AH-01 BCIHP0718-R47M IHLP-2525AH-01 BCIHP0718-R68M BCIHP0718-R82M BCIHP0718-1R0M BCIHP0718-1R2M BCIHP0718-1R5M BCIHP0718-1R8N BCIHP0718-2R2M BCIHP0718-2R5M BCHP0718-3R3M BCIHP0718-4R7M BCIHP0718-5R6M BCIHP0718-6R8M BCIHP0718-8R2M BCIHP0718-100M[8] BCIHP0718-150M BCIHP0718-220M[8] BCIHP0724-R22N IHLP-2525BD-01 BCIHP0724-R33M IHLP-2525BD-01 BCIHP0724-R36M BCIHP0724-R47M IHLP-2525BD-01 BCIHP0724-R56M BCIHP0724-R68M IHLP-2525BD-01 BCIHP0724-R82M IHLP-2525BD-01 BCIHP0724-1R0M IHLP-2525BD-01 BCIHP0724-1R5M IHLP-2525BD-01 BCIHP0724-2R2M IHLP-2525BD-01 BCIHP0724-3R3M IHLP-2525EZ-01 BCIHP0724-4R7M IHLP-2525EZ-01 BCIHP0724-5R6M BCIHP0724-6R8M IHLP-2525EZ-01 BCIHP0724-8R2M IHLP-2525EZ-01 BCIHP0724-100M IHLP-2525EZ-01 BCIHP0724-150M[6] BCIHP0724-220M[8] TEL:+86-512-57823500 TAX:+86-512-57823503 SATURATION HEAT RATING DCR mΩ DCR mΩ INDUCTANCE uH CURRENT DC AMPS CURRENT DC AMPS @200KHZ,0.25V,0A(1) 25℃ MAX. 25℃ Typ. (5) (6) TYPICAL(Irms) TYPICAL(Isat) 0.10 3.50[1] 2.30 18.00 40.00 0.15 5.20 3.30 15.00 38.00 0.22 5.70 3.70 6.00[8] 8.50 0.33 6.50 5.00 12.00 18.00 0.47 9.30 6.60 11.00 18.00 0.68 13.90 11.20 9.00 15.00 0.82 15.90 11.30 8.00 14.00 1.00 18.50[8] 16.00 7.00 11.5 1.20 25.00 18.00 6.00 11.0 1.50 34.00 24.50 6.00 10.0 1 .80 46.00 33.50 6.00 8.50 2.20 46.00 33.50 5.00 8.50 2.50 52.4 1 42.50 3.50 8.00 3.30 60.10 56.0 3.25 6.00 4.70 78.00 70.5 3.00 5.50 5.60 108.00 90.00 2.80 5.00 6.80 136.00 1 0 5 .00 2.50 4.50 8.20 148.00 120.00 2.30 4.00 10.0 195.00 165.00 2.00 4.00 15.0 320.00 280.50 1.50 2.00 22.0 600.00 480.00 1.00 2.50 0.22 3. 2 0 2.90 21.00 34 0.33 4.10 3.65 18.00 22.00 0.36 5.00 4.65 16.00 21.00 0.47 6.50 6.15 13.50 21.00 0.56 7.50 5 .50 12.00 19.00 0.68 9.40 8.00 11.00 18.00 0.82 11.80 9.70 10.00 17.00 1.00 14.20 10.50 9.00 16.00 1.50 21.20 17.00 7.50 13.00[7] 2.20 34.00 25.50 6.50 11.00[8] 3.30 51.60 41.50 5.00 9.00[6] 4.70 63.00 52.50 4.50 7.00[9] 5.60 80.00 60.00 4.00 6.50 6.80 95.00 77.00 3.50 6.00[9] 8.20 120.00[9] 96.00 3.00 5.00[9] 10.00 129.00 120.00 2.50 5.00[9] 15.00 235.00 201.50 2.00 4.00 22.00 380.00 315.00 1.50 3.00 Cheng Yang Electronics Corp Ltd www.baocheng.biz 20 January 2015 TAPE BCIHP07-Series P: 2 / 11 (SMD Power Inductors) Powder Molding Type BCIHP0718/24/30/35/40/0940-Series ● Specification ITEM BCIHP0730-R10N[8]IHLP-2525CZ-01 BCIHP0730-R15N[8]IHLP-2525CZ-01 BCIHP0730-R20N[8]IHLP-2525CZ-01 BCIHP0730-R22N IHLP-2525CZ-01 BCIHP0730-R33M IHLP-2525CZ-01 BCIHP0730-R36M IHLP-2525CZ-01 BCIHP0730-R47M IHLP-2525CZ-01 BCIHP0730-R50M IHLP-2525CZ-01 BCIHP0730-R56M BCIHP0730-R68M IHLP-2525CZ-01 BCIHP0730-R82M IHLP-2525CZ-01 BCIHP0730-1R0M IHLP-2525CZ-01 BCIHP0730-1R5M IHLP-2525CZ-01 BCIHP0730-1R8M BCIHP0730-2R2M IHLP-2525CZ-01 BCIHP0730-2R5M BCIHP0730-3R3M IHLP-2525CZ-01 BCIHP0730-4R7M IHLP-2525CZ-01 BCIHP0730-5R6M BCIHP0730-6R8M IHLP-2525CZ-01 BCIHP0730-8R2M IHLP-2525CZ-01 BCIHP0730-100M IHLP-2525CZ-01 BCIHP0730-120M BCIHP0730-140M BCIHP0730-150M BCIHP0730-220M BCIHP0730-330M[8] BCIHP0730-470M[8] BCIHP0750-R33M BCIHP0750-R47M BCIHP0750-R56M BCIHP0750-R68M BCIHP0750-R82M BCIHP0750-1R0M BCIHP0750-1R5M BCIHP0750-2R2M BCIHP0750-3R3M BCIHP0750-4R7M BCIHP0750-5R6M[8] BCIHP0750-6R8M BCIHP0750-8R2M BCIHP0750-100M TEL:+86-512-57823500 TAX:+86-512-57823503 HEAT RATING SATURATION DCR mΩ DCR mΩ INDUCTANCE uH CURRENT DC AMPS CURRENT DC AMPS @200KHZ,0.25V,0A(1) 25℃ MAX. 25℃ Typ. (5) (6) TYPICAL(Irms) TYPICAL(Isat) 0.10 1.70 1.30 30.00 5 0.00 0.15 2.50 2.05 24.00 4 5 .00 0.20 3.00 2.10 24.00 41.00 0.22 3.10[8] 2.70 23.00[8] 40.00[8] 0.33 3.90 3.20 20.00 30.00[2] 0.36 4.20 3.80 19.00 30.00[2] v 0.47 4.20 3.80 17.50 24.00[2] 0.50 4.90 4.40 17.00 25.50[2] 0.56 5.30 4.70 15.50 23.00[8] 0.68 5.50 4.80 15.50 22.00[2] 0.82 8.00 6.60 13.00 19.00[2] 1.00 10.00 8.50 11.00 17.00[2] 1.50 15.00 12.50 9.00 15.00[2] 1.80 19.00 16.50 9.00 14.00 2.20 20.00 18.00 8.00 12.00[2] 2.50 22.00 18.50 8.00 11.00[8] 3.30 30.00 27.50 6.00 10.00[3] 4.70 40.00 35.50 5.00 8.00[3] 5.60 54.00 48.00 5.00 7.50 6.80 60.00 54.00 4.50 8.00[3] 8.20 68.00 64.00 4.00 6.00[3] 10.00 105.00 95.00 3.00 6.00[3] 12.00 99.00 91.00 3.50 4.00 14.00 120.00 106.00 3.50 3.50 15.00 175.00 150.00 2.50 3.50 22.00 230.00 203.00 2.00 3.00 33.00 380.00 340.00 1.50 2.50 47.00 580.00 500.00 1.25 2.50 0.33 3.70 3.20 21.00 26.00[8] 0.47 4.20 3.50 20.00 22.00 0.56 4.50 3.70 19.00 20.00 0.68 5.30 4.60 16.50 18.00 0.82 7.50 6.40 15.00 18.00 1.00 9.00 7.40 13.00 16.00 1.50 13.50 11.20 11.50 13.00 2.20 15.00 12.50 11.00 12.00 3.30 29.00 23.00 8.00 10.50[5] 4.70 37.00 31.00 6.00 8.00 5.60 45.00 40.50 5.50 6.50 6.80 46.00 42.00 5.50 7.00 8.20 78.00 60.50 5.00 5.50 10.00 90.00 71.50 4.00 5.50 Cheng Yang Electronics Corp Ltd www.baocheng.biz 20 January 2015 TAPE BCIHP07-Series P: 3 / 11 (SMD Power Inductors) Powder Molding Type BCIHP0718/24/30/35/40/0940-Series ● Specification ITEM BCIHP0750-150M BCIHP0750-220M BCIHP0750-330M BCIHP0750-470M BCIHP0750LD-R18N BCIHP0750-R22N BCIHP0735-1R0M BCIHP0735-1R2M BCIHP0735-1R5M BCIHP0735-1R8M BCIHP0735-2R2M BCIHP0735-2R5M BCIHP0735-3R3M BCIHP0735-4R7M BCIHP0735-5R6M BCIHP0735-6R8M BCIHP0735-100M BCIHP0735-150M BCIHP0735-180M BCIHP0735-220M BCIHP0735-R10N BCIHP0735-R15N BCIHP0735-R20N BCIHP0735-R22N BCIHP0735-R33M BCIHP0735-R36M BCIHP0735-R47M BCIHP0735-R56M BCIHP0735-R68M BCIHP0735-R80M BCIHP0735-R82M BCIHP0740-1R0M BCIHP0740-2R2M BCIHP0740-3R3M BCIHP0740-4R7M BCIHP0740HC-5R6M BCIHP0740HC-6R8M INDUCTANCE uH @100KHZ,1.0V,0A 15.00 22.00 33.00 47.00 0.18 0.22 1.00 1.20 1.50 1.80 2.20 2.50 3.30 4.70 5.60 6.80 10.00 15.00 18.00 22.00 0.10 0.15 0.20 0.22 0.33 0.36 0.47 0.56 0.68 0.80 0.82 1.00 2.20 3.30 4.70 5.60 6.80 TEL:+86-512-57823500 TAX:+86-512-57823503 (1) DCR mΩ 25℃ MXA 130.00 155.00 260.00 330.00 1.80 2.70 10.00 12.80 15.00 18.80 20.00 22.00 30.00 40.00 54.00 60.00 105.00 175.00 220.00 230.00 1.70 2.50 3.00 3.10 3.90 4.10 4.20 5.30 5.50 8.00 8.00 9.50 20.00 25.00 38.00 44.00 48.00 DCR mΩ 25℃TYP 111.00 14.50 215.00 295.00 1.45 1.95 8.00 10.40 11.80 15.70 17.50 18.50 27.50 36.00 47.00 51.50 79.00 140.00 190.00 210.00 1.35 1.80 2.20 2.20 3.00 3.85 3.60 4.80 4.60 6.00 7.00 8.00 18.50 21.50 33.50 37.00 42.00 Cheng Yang Electronics Corp Ltd www.baocheng.biz HEAT RATING CURRENT DC AMPS (5) TYPICAL(Irms) 3.60 3.50 2.00 1.50 32.00 24.00 11.00 10.00 9.00 9.00 8.00 8.00 6.00 5.50 5.00 4.50 3.00 2.50 2.50 2.00 26.00 24.00 23.00 22.00 20.00 18.00 17.50 15.50 15.50 13.00 13.00 11.00 8.00 6.00 5.80 8.00 6.00 SATU RATION CURRENT DC AMPS (6) TYPICAL(Isat) 4.40 4.00 2.00 1.80 32.00 36.00 18.00 17.00 16.00 14.00 12.50 13.00 10.50 8.50 8.00 7.50 6.00 4.00 4.00 3.50 60.00 45.00 41.00 36.00 30.00 28.00 26.00 24.00 23.00 24.00 20.00 19.00 12.00 9.00 8.00 8.00 6.50 20 January 2015 TAPE BCIHP07-Series P: 4 / 11 (SMD Power Inductors) Powder Molding Type BCIHP0718/24/30/35/40/0940-Series ●BCIHP0750LD-150M Specification ITEM BCIHP0740TB-100M BCIHP0740TB-120M BCIHP0740TB-150M BCIHP0940-4R7M BCIHP0940-220M BCIHP0940-330M BCIHP0940HC-3R3M 15.00 [8] INDUCTANCE uH @100KHZ,1.0V,0A 10.00 12.00 15.00 4.70 22.00 33.00 3.30 TEL:+86-512-57823500 TAX:+86-512-57823503 (1) 100.00 DCR mΩ 25℃ MXA 79.00 87.00 99.00 32.00 110.00 180.00 17.70 80.00 DCR mΩ 25℃TYP 93.00 100.00 116.00 28.50 104.00 168.00 15.50 Cheng Yang Electronics Corp Ltd www.baocheng.biz 4.30 4.30 HEAT RATING CURRENT DC AMPS (5) TYPICAL(Irms) 4.00 4.00 3.60 7.50 3.70 3.10 9.20 SATU RATION CURRENT DC AMPS (6) TYPICAL(Isat) 5.00 4.50 4.40 18.70 3.80 3.20 20.00 20 January 2015 TAPE BCIHP07-Series P: 5 / 11 (SMD Power Inductors) Powder Molding Type BCIHP0712/15/18/24/30/50-0940Series Note: (1) (2) (3) (4) (5) (6) (7) (1) (2) (3) (4) (5) (6) (7) Tolerance of Inductance: N=±30% ,M=±20%. All test data is referenced to 25℃ ambient. Inductance is measured at 200KHz. 25℃ ambient. Operating Temperature Range-40℃ to +125℃. DC current (Irms) (A) that will cause an approximate △T of 40℃. DC current (Isat) (A) that will cause Lo to drop approximately 20%. The part Temperature (ambient + temp rise) should not exceed 125℃ under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature Part temperature should be verified in the end application. 電感的公差：N=±30%,M=±20%. 所有的測試資料應該是在 25℃的環境溫度下測試. 感值測試頻率 200KHz. 操作溫度範圍－40℃到+125℃. 加 DC(Irms)電流值(A)會導致△T 40℃左右的變化. 加 DC(Isat)電流值(A)會導致初始值下降 20%左右. 產品的溫度不能超過 125℃，即使在最壞的操作情況下，基板設計，元件放置，PWB 尺寸和厚度， 氣流和一些冷卻設備都會影響產品溫度，產品溫度要在最終應用時才被驗證. TEL:+86-512-57823500 TAX:+86-512-57823503 Cheng Yang Electronics Corp Ltd www.baocheng.biz 20 January 2015 TAPE BCIHP07-Series P: 6 / 11 (SMD Power Inductors) Powder Molding Type BCIHP0712/15/18/24/30/50-0940Series ● Material List NO 1 2 ITEM Core Wire External Electode 3 Electroplating 4 Paint Materials Magnetic Metal Powder or equivalen Polyester Wire or equivalen Copper Ni/Sn Epoxy resin ● Packaging Information (1) Reel Dimension & Tape Dimension / Packaging Quantity ITEN DIMENSIONS (m/m) Q’TY (PCS) W1±0.3 W2±0.5 W±0.3 F±0.1 T±0.05 BCIHP0712 2,000 16.80 23.10 16.00 A0±0.1 B0±0.1 K0±0.1 P±0.1 7.10 7.60 1.80 12.00 7.50 0.40 BCIHP0715 2,000 16.80 23.10 16.00 7.10 7.60 1.80 12.00 7.50 0.40 BCIHP0718 1,500 16.80 23.10 16.00 7.10 7.60 2.60 12.00 7.50 0.40 BCIHP0724 1,500 16.80 23.10 16.00 7.10 7.60 2.60 12.00 7.50 0.40 BCIHP0730 1,000 16.80 23.10 16.00 7.10 7.60 3.50 12.00 7.50 0.40 BCIHP0750 800 16.80 23.10 16.00 7.00 7.50 5.15 12.00 7.50 0.40 BCIHP0750LD 800 16.80 23.10 16.00 7.00 7.50 5.15 12.00 7.50 0.40 (2) Tearing Off Force The force tearing off cover 10 to 130 grams (0.1N to 1.3N) in the arrow direction under the following conditions. ● Storage conditions/Note things (1) Storage temperature and humidity conditions : 1. Product packing with Carrier tape: +5℃~+40℃ and less than 60% RH. 2. Product alone: -20℃~+60℃ and less than 60% RH. (2) Products should be used within 6 months. (3) The packaging material should be kept where no chlorine or sulfur exists in the air. (4) Do not touch the electrodes (soldering terminals) with fingers as this may lead to deterioration of solder ability. (5) The use of tweezers or vacuum pick-ups is strongly recommended for individual components. (6) Bulk handling should ensure that abrasion and mechanical shock are minimized. TEL:+86-512-57823500 TAX:+86-512-57823503 Cheng Yang Electronics Corp Ltd www.baocheng.biz 20 January 2015 TAPE BCIHP07-Series P: 7 / 11 (SMD Power Inductors) SMD Power Inductors BCIHP0712/15/18/24/30/50-Series ● Package for standard ITEM Packing method & Dimensions Box Size W=345mm D=345mm H=185mm ITEM Packing Quantity Reel Quantity Total Quantity BCIHP0712 2,000 Pcs/Reel (0.88Kg(Ref)) 6 Reel/Box 12,000 Pcs/Box (6.05Kg(Ref)) BCIHP0715 2,000 Pcs/Reel (1.08Kg(Ref)) 6 Reel/Box 12,000 Pcs/Box (7.25Kg(Ref)) BCIHP0718 1,500 Pcs/Reel (1.00Kg(Ref)) 6 Reel/Box 9,000 Pcs/Box (6.70Kg(Ref)) BCIHP0724 1,500 Pcs/Reel (1.20Kg(Ref)) 6 Reel/Box 9,000 Pcs/Box (7.90Kg(Ref)) BCIHP0730 1,000 Pcs/Reel (1.10Kg(Ref)) 6 Reel/Box 6,000 Pcs/Box (7.40Kg(Ref)) BCIHP0750 800 Pcs/Reel (1.35Kg(Ref)) 6 Reel/Box 4,800 Pcs/Box (8.80Kg(Ref)) BCIHP0750LD 800 Pcs/Reel (1.35Kg(Ref)) 6 Reel/Box 4,800 Pcs/Box (8.80Kg(Ref)) TEL:+86-512-57823500 TAX:+86-512-57823503 Cheng Yang Electronics Corp Ltd www.baocheng.biz 20 January 2015 TAPE BCIHP07-Series P: 8 / 11 (SMD Power Inductors) Powder Molding Type BCIHP0712/15/18/24/30/50-0940Series ● General Characteristics Operation Temperature External Appearance -40℃ to +125℃ (Includes temperature when the coil is heated) On visual inspection, the coil has no external defects. ● Electrical Performance Test Inductance DCR Refer to standard electrical characteristics list. BCIHP0712/15/18/24/30/50/50LD-Series △L≦20% typical. Saturation Current(Isat) Heat Rated Current(Irms) Approximately △T≦40℃. ● Reliability Test Solder Ability Test 1. More than 90% of terminal electrode should be covered with solder.  After fluxing, component shall be dipped in a melted.  Solder: bath at 245℃±5℃ for 5±0.5 seconds. 1. 2. Heat resistance of  Reflow Soldering Test    1. Adhesion strength Test Components should have not evidence of electrical and mechanical damage. Inductance: within±10% of initial value. Preheat:150±5℃ 60seconds. Solder temperature: 255+5℃/-0℃. Flux: rosin. Dip time:10±0.5seconds. No apparent damage  Product is mounted on PCB. Thereafter R340 pressure fixture is used to apply pressure to product from backside of the board at a rate of approx. 1mm/sec. until bending width becomes 1mm and keep it for 5sec. 1. No separation or indication of electrode. static load using a R5.0 pressing tool shall be applied to the Welding strength Test  A body of the specimen in the direction of the arrow and shall be hold for 3±1 sec. Insulating Resistance Over 100MΩ at 100V D.C. between coil and core. Dielectric Strength Vibration Test Drop Test TEL:+86-512-57823500 TAX:+86-512-57823503 No dielectric breakdown at 30V D.C. for 1 minute between coil and core. 1. No separation or Inductance deviation within +10% after vibration for 1 indication of hour. In each of three orientations at Sweep vibration (10~55~10HZ) with 1.5mmP-P amplitudes. electrode. 2. △L/L≦15% Inductance deviation within +10% after being dropped once with 981m/s2 (100G) shock Attitude upon a rubber block method shock testing machine, in three different orientations. Cheng Yang Electronics Corp Ltd www.baocheng.biz 20 January 2015 TAPE BCIHP07-Series P: 9 / 11 (SMD Power Inductors) Powder Molding Type BCIHP0712/15/18/24/30/50-0940Series ● Reliability Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Humidity Test Thermal Shock Test Storage Test TEL:+86-512-57823500 TAX:+86-512-57823503 Required Characteristics 1. No case deformation or change in appearance 2. △L/L≦15% 3. △Q/Q≦30% 4. △DCR/DCR≦15%  Temperature:125℃±3℃ Time:96±2 hours.  Tested not less than 1 hour, nor more than 2 hours at room. Test Method/Condition 1. No case deformation or change in appearance 2. △L/L≦15% 3. △Q/Q≦30% 4. △DCR/DCR≦15%  Temperature:-40℃±3℃ Time:96±2 hours.  Tested not less than 1 hour, nor more than 2 hours at room. 1. No case deformation or change in appearance 2. △L/L≦15% 3. △Q/Q≦30% 4. △DCR/DCR≦15%  Temperature:85℃±3℃.  Humidity:85±5%RH  Test Time:96±2 hours  Tested not less than 1 hour. Nor more than 2 hours at room temperature. 1. No case deformation or change in appearance 2. △L/L≦15% 3. △Q/Q≦30% 4. △DCR/DCR≦15%  First–40℃ for 30 Minutes, last 125℃ for 30 Minutes as 1 cycle. Go through 20 cycles. Cheng Yang Electronics Corp Ltd www.baocheng.biz 20 January 2015 TAPE BCIHP07-Series P: 10 / 11 (SMD Power Inductors) Powder Molding Type BCIHP0712/15/18/24/30/50-0940Series ● Soldering re-flow IPC/JEDEC J-STD-020C, Figure 5-1 TEL:+86-512-57823500 TAX:+86-512-57823503 11 Bao Cheng Electronics Corp Ltd www.baocheng.biz 20 January 2015 TAPE BCIHP07-Series P: 10 / (SMD Power Inductors) Powder Molding Type BCIHP0712/15/18/24/30/50-0940Series ● Modify records Numbering Date Modify content [1] [1] [2] [2] [2] [2] [2] [2] [2] [2] [2] [3] [3] [3] [3] [3] [4] 2015/8/27 2015/8/27 2015/8/28 2015/8/28 2015/8/28 2015/8/28 2015/8/28 2015/8/28 2015/8/28 2015/8/28 2015/8/28 2015/8/31 2015/8/31 2015/8/31 2015/8/31 2015/8/31 2015/11/19 [5] [6] [6] [7] 2015/11/19 2015/12/15 2015/12/15 2015/12/25 [8] 2016/4/19 [9] 2017/3/2 BCIHP0718-R47M Isat:18A>.17A. 18A BCIHP0718-1R0M DCR:18.5mΩ>18.3mΩ.>18.5mΩ. BCIHP0730-R22M Isat:28A>30A. BCIHP0730-R47M Isat:24A>26A BCIHP0730-R56M Isat:23A>25A BCIHP0730-R68M Isat:22A>25A.. BCIHP0730-R82M Isat:19A>24A. BCIHP0730-1R0M Isat:17A>22A BCIHP0730-1R5M Isat:15A>18A BCIHP0730-2R2M Isat:12A>14A BCIHP0730-2R5M Isat:12A>13.5A BCIHP0730-3R3M Isat:10A>13.5A BCIHP0730-4R7M Isat:8A>10A BCIHP0730-6R8M Isat:7A>8A BCIHP0730-8R2M Isat:6A>7.5A BCIHP0730-100M Isat:5.5A>7A Added BCIHP0750LD-R82M`BCIHP0750LD-1R5M`BCIHP0750LD-2R2M`BCIHP0750LD-3R3M BCIHP0750LD-4R7M`BCIHP0750LD-100M. BCIHP0750-3R3M Isat:9.5A>10.5A BCIHP0724-3R3M Isat:9.0A>13.0A Added BCIHP0240-150M BCIHP0724-1R5M Isat:13.0A>15.0A Added BCIHP0750-680M BCIHP0715-1R0M DCR:18.5mΩ>18.3mΩ. BCIHP0715-100M DCR:265mΩ>200mΩ. BCIHP0718-2R2M Irms:5A>6A BCIHP0718-3R3M DCR:60.1mΩ>60mΩ. BCIHP0724-2R2M Isat:11.0A>14.0A BCIHP0730-R22N DCR:3.1mΩ>2.8mΩ. Irms:22A>23A. Isat:34A>40A. BCIHP0730-R56M Isat:25A>23A BCIHP0730-2R5M Isat:13.5A>11A BCIHP0750-R33M Isat:25A>26A Added BCIHP0715-2R2M`BCIHP0715-3R3M`BCIHP0724-220M`BCIHP0730-R10N BCIHP0730-R15N`BCIHP0730-R20N`BCIHP0730-330M`BCIHP0730-470M BCIHP07505R6M`BCIHP0750-220M`BCIHP0750-330M`BCIHP0750-470M BCIHP0750LDR18N`BCIHP0750LD-R33M`BCIHP0750LD-R47M`BCIHP0750LD-R56M BCIHP0750LDR68M`BCIHP0750LD-1R0M`BCIHP0750LD-5R6M`BCIHP0750LD-6R8M BCIHP0750LD-8R2M`BCIHP0750LD-150M BCIHP0724-4R7M Isat:7.0A>10.0A BCIHP0724-6R8M Isat:6.0A>9.0A BCIHP0724-8R2M DCR:120mΩ>106mΩ. Isat:5.0A>8.0A BCIHP0724-100M Isat:5.0A>7.0A. TEL:+86-512-57823500 TAX:+86-512-57823503 11 Bao Cheng Electronics Corp Ltd www.baocheng.biz 20 January 2015 TAPE BCIHP07-Series P: 11 /