ARF6-16-S-D-A-K-TR

SLIM, DIRECT ATTACH CABLE ASSEMBLIES (0.635 mm) .025" PITCH FEATURES & BENEFITS • Slimmest cable assembly in the industry – 7.6 mm width • High-density 2-row design • 8, 16 and 24 differential pair configurations • 34 AWG, 100 Ω Eye Speed® ultra low skew twinax cable • Multiple wiring options including reverse polarity • Mating board level socket (ARF6 Series) features standard rugged weld tabs for increased stability on the PCB • Rugged metal latching and shielding • Supports 56 Gbps PAM4 (28 Gbps NRZ) applications • Utilizes Samtec’s Flyover® Technology to simplify board layout and extend signal reach Right-angle available. Visit samtec.com?ARF6-RA for specifications. Two rows of high-density contacts directly soldered to the cable KEY SPECIFICATIONS PITCH CABLE SIGNAL ROUTING INSULATOR MATERIAL CONTACT MATERIAL PLATING OPERATING TEMP RANGE (0.635 mm) .025" 34 AWG Eye Speed® ultra low skew twinax 100 Ω Differential Black LCP Copper Alloy Au or Sn over 50 µ" (1.27 µm) Ni -40 °C to +125 °C F-221 (Rev 20JUN22) samtec.com/AcceleRate-Cable Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice. (0.635 mm) .025" • SLIM CABLE & SOCKET ARC6 - NO OF PAIRS - –08 - CABLE LENGTH –“XX.X” –24 - –LU = Length in Inches 03.0" (76.2 mm) minimum –16 END 1 - END 2 –LU = Latch Up - WIRING OPTION CABLE TYPE –2 = Latch Up –1 = Pin 1 to Pin 2 (End 2 -LD option only) –LD = 34 AWG 100 Ω Eye Speed ® –3 = Latch Down = Pin 1 to Pin N-1 (End 2 -LU option only) –2R ARC6 = Pin 1 to Pin 2 Reversed Polarity (End 2 -LD option only) 0.60" (152.4 mm) min. cable length Board Mates: ARF6 –3R = Pin 1 to Pin N-1 Reversed Polarity (End 2 -LU option only) 0.60" (152.4 mm) min. cable length LENGTH = (CABLE LENGTH + (8.1) .319) ±1% CABLE LENGTH ±1% A (15.00) .591 (5.65) .222 ARC6–08–XX.X-LU–LU–3–X SHOWN Notes: Cable lengths longer than 40.00" (1 meter) are not supported with S.I. test data. ARF6 - NO. OF PAIRS A N N-1 –08 (10.90) .429 26 25 –16 (18.52) .729 50 49 –24 (26.14) 1.029 74 73 View complete specifications at: samtec.com?ARC6 NO. OF PAIRS –08 –16 –24 - - PLATING –S ROW - –D = 30 µ" (0.76 µm) Gold on contact area, Matte Tin on tail = Double Row A –A = Alignment Pin - - K “X”R –K = Polyimide film Pick & Place Pad ARF6 Cable Mates: ARC6 –TR = Tape & Reel –FR = Full Reel Tape & Reel (must order maximum quantity per reel; contact Samtec for quantity breaks) A (12.51) .493 (7.21) .284 B Notes: Tape & Reel packaging and K-Dot are standard. Some sizes, styles and options are non-standard, non-returnable. NO. OF PAIRS A B C –08 (12.46) .491 (7.62) .300 (9.59) .378 –16 (20.08) .791 (15.24) .600 (17.21) .678 –24 (27.70) 1.091 (22.86) .900 (24.83) .978 C ARF6–16–L–D–A SHOWN View complete specifications at: samtec.com?ARF6 samtec.com/AcceleRate-Cable F-221 (Rev 20JUN22) Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice.