SLC-21T-2.0

Hand tools 5-A Crimping tools Crimping tools Hand tools for chain terminals Hand tools for loose piece terminals Extraction and Insertion tools for loose piece terminals YRS YC YRM YRF series series series series Dimensions: (W x L) 59X224mm (2.3" x 8.8") Dimensions: (W x L) 70X296mm (2.8" x 11.7") Dimensions: (W x L) 59X224mm (2.3" x 8.8") Dimensions: (W x L) 70X295mm (2.8" x 11.6") 80X305mm (3.1" x 12.0") Extraction tool Insertion tool Terminals and parts model number in alphabetical order Note: (1) These tools are for prototype tooling or repair. (2) YC tool has two crimping sections (A and B). YRS tool has also two crimping sections by inverting upper dies. Be sure to check applicable wires before use. Since the dies are fixed, the crimping height cannot be adjusted. Therefore, some of the applicable wires described in this catalog may not be crimped properly. Before use, check for proper crimping (such as tensile strength, terminal/contact deformation). (3) These tools are not applicable to 2-wire crimping. (4) When hand crimping board-in terminals (SAN, SCN, SDN, SGN, SIN, SJN, SZN), care should be taken not to contaminate the solder tails of the terminals, as with greasy or oily fingers. If a solder problem arises, some cleaning of the tips of the terminal is advisable. (5) WC and JUC hand tools are provided by J.S.T.(U.K.) LTD. and contact them about the details of these hand tools. YRS series Extraction tool is used to extract contacts improperly inserted in the housing. YC series YRM series YRF series WC & JUC series JUK's Hand Tools Terminal in loose form model No. – Insertion tool allows contacts be inserted in the housing. This tool greatly increases efficiency especially when thin wires are used. CN-SAP/S1 YRS-870 – – – – – JK-SP2*** YRS-370 – – – – – KEJ-0.7 – JK-SS2*** YRS-370 – – – – – KEJ-0.4 – J-SP1*** YRS-440 YC-440 – – – J-BP1*** DEJ-0.3 – J-SS1*** YRS-440 YC-440 – – – J-BP1*** DEJ-0.3 – J-SP2*** YRS-330 – – – – – DEJ-0.3 – J-SS2*** YRS-330 – – – – – DEJ-0.3 – – LFO-1.0-250N – – – – JUCS-FO – – – LFO-2.5-250N – – – – JUCS-FO – – – MD-SP12** YRS-470 – – – – – MEJ-06 – MD-SP22** YRS-460 – – – – – MEJ-06 – – – RA-BC12** EJ-RA – RF-BC22** YRS-231 YRM-232 RA-SC1290 – (for AWG #26, #24) YRM-233 (for AWG #24, #22) RF-SC22** – – – – RPJ-SP/SS2331 YRS-331 – – – YRM-230 – – – – – – UBB-SP1110 YRS-951 – – – – – – – UBB-SP2110 YRS-950 – – – – – – – SAA-21(T)-** – YC-141 – – – LAA-21(T-)** – – SAA-50(T)-** – YC-182 – – – LAA-50(T)-** – – SAA-51(T)-** – YC-142 – – – LAA-51(T)-** – – SAB-51(T)-** – YC-142 – – – LAB-51(T)-** – – – – SAGH-002GU-P0.3 YRS-858 – – – – – SAN-002T-0.8A YRS-220 – – – – – EJ-PH SAN-002T-0.8K YRS-220 – – – – – EJ-PH – – – – – SBH-001T-P0.5 SBHL-002T-P0.5 – YC-670R YRS-857 SBHM-001T-P0.5 – YC-670R BBH-001T-P0.5 – BBHM-001T-P0.5 – – – – – – – – – – SBHS-002T-P0.5A YRS-852 – – – – – – – SBHSM-002T-P0.5 YRS-854 – – – – – – – 934 – WC-670 – 935 Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series Hand tools for loose piece terminals Extraction and Insertion tools for loose piece terminals YC series YRM series YRF series WC & JUC series JUK's Hand Tools Terminal in loose form model No. – – – – – Extraction tool Insertion tool YRS-856 SBHT-002T-P0.5 (UL3443 AWG #28, UL3239 AWG #24) YRS-857 EJ-BHT IT-BHT (UL3443 AWG #26, UL10267 AWG #26) SCN-001T-1.0K YRS-191 YC-191R – – WC-191 BCN-001T-1.0K – SCN-001T-P1.0 YRS-191 YC-191R – – WC-191 BCN-001T-P1.0 – – – – – – SCS-41T-2.3 SCZH-002T-P0.5 – CSJ-23 – – – – YC-045 – – – LDF-01T-1.0A – – SDF-01T-1.3AS – YC-045 – – – LDF-01T-1.3AS – – SDN-21T-P1.5 – YC-600R – – – BDN-21T-P1.5 – – SDY-01T-P1.6ASV – YC-525R – – – YC-260R – – YRS-260 WC-260 – – – SDF-01T-1.0A SEH-001T-P0.6 YRS-492 – – – – SLJ-1.4 BEH-001T-P0.6 – – – – SF3F-002GF-P2.0 – – – YRF-882 – BF3F-002GF-P2.0 EJ-JFA•J3 – SF3F-01GF-P2.0 – – – YRF-881 – BF3F-01GF-P2.0 EJ-JFA•J3 – SF3M-01GF-M2.0N – – – YRF-881 – BF3M-01GF-M2.0N EJ-JFA•J3 – SF3F-41GF-P2.0 – – – YRF-880 – LF3F-41GF-P2.0 EJ-JFA•J3 – SF3M-41GF-M2.0N – – – YRF-880 – LF3M-41GF-M2.0N EJ-JFA•J3 SF3F-71GF-P2.0 – – – YRF-1070 – BF3F-71GF-P2.0 – SF3M-71GF-M2.0N – – – YRF-1071 – BF3M-71GF-M2.0N – – SFO-41(T)-187N – YC-271 – – – LFO-41(T)-187N – – SFO-61(T)-250A – YC-270 – – – LFO-61(T)-250A – – SFPS-61(T)-250 – YC-272 – – – LFPS-61(T)-250 – – SFT-61T-250N – YC-510 – – – LFT-61T-250N – – SGF-41(T)-4 – YC-055 – – – LGF-41(T)-4 – – SGF-51(T)-5 – YC-065 – – – LGF-51(T)-5 – – SGF-51(T)-5A – YC-065 – – – LGF-51(T)-5A – – SGM-51(T)-4 – YC-056 – – – LGM-51(T)-4 – – SGM-51(T)-5 – YC-056 – – – LGM-51(T)-5 – – – – WC-SHCM-A03 – – – – – WC-122 – – SHCM-A03T-P025 YRS-960 SHF-001T-0.8BS YRS-122 SHF-002T-0.8BS YRS-300 SHR-001T-P0.6 YRS-580 – YC-122R – – – – – – – – YC-580R – – – BHR-001T-P0.6 – – YC-054 – – – LIM-01(T)-110A – – – – – JUCS-IM – – – – – – JUCS-IM – – – – – – LIM-41(T)-110B – – LIM-51(T)-250N SIM-01(T)-110A – SIM-1.0-250D/N – SIM-2.5-250D/N – SIM-41(T)-110B – YC-067 – YC-321 SIM-51(T)-250N BHF-001T-0.8BS – – – – – – SIN-001T-1.2 YRS-034 – – – – – – – SIN-002T-1.0S YRS-035 – – – – – – – SIN-01T-1.2 – YC-340R – – – LIN-01T-1.2 – – SIN-01T-1.8 – YC-032 – – – LIN-01T-1.8 – – SIN-21T-1.8 – YC-350 – – – LIN-21T-1.8 – – – – – LIN-21T-1.8S – – – – – LIN-61T-2.6S – – YC-570 SIN-21T-1.8S – (for UL1015 AWG #22, #20) YC-571 (for UL1015 AWG #18) SIN-61T-2.6S 936 – YC-560 (for UL1015 AWG #14) 937 Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series SIN-81T-3.6S – Hand tools for loose piece terminals YC series YRM series YRF series WC & JUC series JUK's Hand Tools YC-940 Extraction and Insertion tools for loose piece terminals Extraction tool Terminal in loose form model No. Insertion tool – – – LIN-81T-3.6S – – SJ2F-002GF-P1.0 YRS-8851 – – – – – – – SJ2M-002GF-M1.0 YRS-8851 – – – – – – – SJ2F-01GF-P1.0 YRS-8861 – – – – – – – SJ2M-01GF-M1.0N YRS-8861 – – – – – – – SJ2M-01GF-M1.0S YRS-8861 – – – – – – – – SJ2F-21GF-P1.0 – – – YRF-1120 – LJ2F-21GF-P1.0 – SJ2M-21GF-M1.0N – – – YRF-1120 – LJ2M-21GF-M1.0N – – SJ5F-71GF-P6.5 – – – YRF-888 – LJ5F-71GF-P6.5 – – SJ5M-71GF-M6.5 – – – YRF-888 – LJ5M-71GF-M6.5 – – SJ5F-81GF-P6.5 – – – YRF-889 – LJ5F-81GF-P6.5 – – – – YRF-889 – LJ5M-81GF-M6.5 – – – SJ5M-81GF-M6.5 SJN-002PT-0.9 – YRS-036 – – SLC-21T-2.0 – YC-310 – – WC-310 LLC-21T-2.0 SLF/M-01T-P1.3E – YC-202 – – WC-202 LLF/M-01T-P1.3E LEJ-13 SLF/M-41T-P1.3E – YC-203 – – WC-203 LLF/M-41T-P1.3E LEJ-13 SMF-01T-1.0 – YC-081 – – – YC-082 – – – – YC-580R – – – BMR-001T-0.6 YC-680 – – – YC-066 – – – – – – SMF-01T-1.3 SMM-003T-0.5 YRS-800 SMR-001T-0.6 YRS-580 – SOM-21(T)-187 – SOM-51(T)-250 – – – – – – – LIT-2013 – – LMF-01T-1.0 – – – LMF-01T-1.3 – – – – – LOM-21(T)-187 – – LOM-51(T)-250 – – – BPA-001T-P0.5 – – – BPAL-001T-P0.5 – – WC-800 WC-066 HRWJ – YC-610R SPA-001T-P0.5 – (for AWG #26, #24) YC-611R (for UL1007 AWG #24, UL1061 AWG #22) YC-610R SPAL-001T-P0.5 – (for AWG #26, #24) YC-611R (for UL1007 AWG #24, UL1061 AWG #22) SPB-1.0-250N-S – – – – JUCS-PB – – – SPB-2.5-250N-S – – – – JUCS-PB – – – SPF-01T-2.5C – – – – – – – – – YC-043R SPH-001T-P0.5L YRS-245 – SPH-002T-P0.5L YRS-241 – SPH-002T-P0.5S YRS-240 – SPH-004T-P0.5S YRS-243 – YRM-240 – – WC-240 – – – – WC-610 – WC-620 LPF-01T-2.5C – – BPH-002T-P0.5S – – – – – EJ-PH – EJ-PH – EJ-PH – BPHD-001T-P0.5 EJ-PHD – BPHD-002T-P0.5 EJ-PHD – YC-610R SPHD-001T-P0.5 – (for AWG #26, #24) YC-611R (for UL1007 AWG #24, UL1061 AWG #22) SPHD-002T-P0.5 YRS-620 – SPND-001T-C0.5 YRS-1091 – – – SPND-002T-C0.5 YRS-1090 – – – – – WC-740 – – WC-730 LPS-01T-187(-8) SPS-01T-110 – SPS-01T-187(-8) – SPS-21T-250(-5) – YC-760 – – SPS-21T-250 – YC-780 – – 938 YC-740 YRM-620 YC-730 (for AWG #26, #22) YC-731 (for AWG #24, #20) – – – WC-780 – – – – – – – LPS-01T-110 – – – – EJ-PS187 LPS-21T-205(-5) LPS-21T-250 EJ-PS250 – – 939 Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series SPS-21T-250S – SPS-41T-110 – SPS-51T-187(-8) – SPS-51T-205 – Hand tools for loose piece terminals YC series YC-780 YC-750 (for AWG #20, #18) YC-751 (for AWG #16) YC-710 (for AWG #20, #16) YC-711 (for AWG #18, #14) Extraction and Insertion tools for loose piece terminals WC & JUC series JUK's Hand Tools Extraction tool Terminal in loose form model No. YRM series YRF series – – WC-780 LPS-21T-250S – – WC-750 LPS-41T-110 – – WC-710 LPS-51T-187(-8) – – Insertion tool EJ-PS250 – – – EJ-PS187 – YC-770 (for UL1015 AWG #20, #16) YC-771 – LPS-51T-205 – – LPS-61T-250 EJ-PS250 – – LPS-61T-250S EJ-PS250 – (for UL1015 AWG #18, #14) SPS-61T-250 – YC-720 – – SPS-61T-250S – YC-721 – – SPS-91T-250 – – – YRF-790 – BPS-91T-250 EJ-PS250 – SPS-91T-250S – – – YRF-791 – BPS-91T-250S EJ-PS250 – SRA-20(T)-** – YC-181 – – – LRA-20(T)-** – – SRA-21(T)-** – YC-141 – – – LRA-21(T)-** – – SRA-50(T)-** – YC-182 – – – LRA-50(T)-** – – SRA-51(T)-** – YC-142 – – – LRA-51(T)-** – – SRB-1.0-( ) – – – JUCS-RB/RT – – – SRB-2.5-( ) – – – JUCS-RB/RT – – – SRB-51(T)-** – YC-142 – – – LRB-51(T)-** – – SRC-01(T)-** – YC-033 – – – LRC-01(T)-** – – SRC-50(T)-** – YC-183 – – – LRC-50(T)-** – – SRC-51(T)-** – YC-142 – – – LRC-51(T)-** – – SRF-51(T)-** – YC-142 – – – LRF-51(T)-** – – SRT-1.0-( ) – – – – JUCS-RB/RT – – – SRT-2.5-( ) – – – – JUCS-RB/RT – – – SRT-51T-** – YC-143R – – – LRT-51T-** – – SRWF-01GG-M0.6 – YC-830R – – – BRWF-01GG-M0.6 – – SRWM-01GG-S0.6 – YC-830R – – – BRWM-01GG-S0.6 – – SRWF-61GG-M0.6 – YC-840R – – – BRWF-61GG-M0.6 – – SRWM-61GG-S0.6 – YC-840R – – – BRWM-61GG-S0.6 – – SSH/L-002( )-P0.2 – – – WC-720 – – – WC-GH2630 – – – SSH-003T-P0.2-H YRS-859 – – – WC-SH2832 – – – SSH-003GA-P0.2 YRS-859 – – – WC-SH2832 – – – SSHL-003T-P0.2 YRS-859 – – – WC-SH2832 – – – SSHL-003GA1-P0.2 YRS-859 – – – WC-SH2832 – – – BSF-01T-P1.4 SLJ-1.4 ITBL-08V – BSM-01T-P1.4 SLJ-1.4 ITBL-08V BSF/M-21T-P1.4 SLJ-1.4 SSF-01T-P1.4 – YC-500 – – SSM-01T-P1.4 – YC-500 – – SSF/M-21T-P1.4 – YC-550 – – STI-01(T)-110N – YC-041 – – STI-1.0-250D/N – – – – JUCS-TI STI-2.5-250D/N – – – – JUCS-TI STI-41(T)-110N – YC-063 – – – STI-51(T)-250N – YC-322 – – STO-01(T)-110N(-8) – YC-041 – – STO-01(T)-187N(-8) – YC-042 – STO-0.25-110N – YC-810 – 940 WC-550 – LTI-01(T)-110N – – – – – – – – – – LTI-41(T)-110N – – – LTI-51(T)-250N – – – LTO-01(T)-110N(-8) – – – – LTO-01(T)-187N(-8) – – – – – – – 941 Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series Hand tools for loose piece terminals YC series YRM series YRF series YC-820 Extraction and Insertion tools for loose piece terminals WC & JUC series JUK's Hand Tools Terminal in loose form model No. Extraction tool Insertion tool STO-0.5-110N – – – JUCS-05110 – – – STO-1.0-110N – – – – JUCS-2.8/4.8 – – – STO-1.0-187N – – – – JUCS-2.8/4.8 – – – STO-1.0-250N – – – – JUCS-6.3 – – – STO-2.5-250N – – – JUCS-6.3 STO-21T-205 – YC-052 – – – STO-21(T)-205N – YC-053 – – – STO-21(T)-250N – YC-102 – – – STO-41(T)-110N(-8) – YC-062 – – STO-41(T)-187N(-8) – YC-051 – STO-41T-187S – YC-064 STO-61(T)-250N – STO-81(T)-250N SVA-41T-P1.1 – – – – – – – LTO-21(T)-205N – – LTO-21(T)-250N – – – LTO-41(T)-110N(-8) – – – – LTO-41(T)-187N(-8) – – – – – LTO-41T-187S – – YC-047 – – – LTO-61(T)-250N – – – YC-280 – – LTO-81(T)-250N – – – YC-450 – – – BVA-41T-P1.1 SVF-01T-1.5A – YC-044 – – – LVF-01T-1.5A – SVF-01T-1.5N – YC-151 – – – LVF-01T-1.5N – SVF-01T-2.36LN – – – – SVF-01T-2.36N – YC-152 – – SVF-42T-P2.0 – YC-592 – – WC-592 SVM-42T-P2.0 – YC-593 – – SVF/M-61T-P2.0 – YC-590 – SVF/M-81T-P2.0 – – – – YC-160R (for AWG #22, #20) SVH-21T-P1.1 – YRF-280 – LVF-01T-2.36N EJ-LV – BVF-42T-P2.0 VLJ-20 – WC-592 BVM-42T-P2.0 VLJ-20 – YRF-590 WC-590 BVF/M-61T-P2.0 VLJ-20 – YRF-591 WC-591 BVF/M-81T-P2.0 VLJ-20 – – WC-160 BVH-21T-(P)1.1 EJ-NV – – – WC-930 BVH-41T-P1.1 YRM-160 (for AWG #20, #18) (for UL1015 AWG #22, #20) – – YC-161R YC-164R – EJ-LV – – EJ-SMP YRM-164 YC-930R SVH-41T-P1.1 – (for AWG #20, #16) YC-931R – – – – – (for UL1015 AWG #20, #18) SVT-41T-P1.1 – YC-630 – – – BVT-41T-P1.1 SVU-21T-P0.6 – YC-990R – – – BVU-21T-P0.6 SWPKR-21T-0.6 – – – YRF-1050 – – – SWPKP-21T-0.6 – – – YRF-1051 – – – – – – – WC-JWPF – – – – – – SWPR-001T-P025 YRS-980 SWPT-001T-P025 YRS-980 – – WC-JWPF SXA-01T-P0.6 – YC-701R – – WC-700M SXM-01T-P0.6 – YC-701R – – EJ-VT – BXA-01T-P0.6 EJ-XMP – – BXM-01T-P0.6 EJ-XMP – SXA-001T-P0.6 YRS-692 YC-692R – – – BXA-001T-P0.6 EJ-XMP, EJ-XMR SXM-001T-P0.6 YRS-692 YC-692R – – – BXM-001T-P0.6 EJ-XMP, EJ-XMR SXA-001T-P0.6L YRS-691 – – WC-691 YC-701R – – WC-700M YC-692R – – SXAM-01T-P0.6 SXAM-001T-P0.6 – – YRS-692 – – IT-XA IT-XA – – BXAM-01T-P0.6 – – – BXAM-001T-P0.6 – – SXF-01T-P0.7 – YC-251 – – – BXF-01T-(P)0.7 LEJ-7 – SXF-41T-P0.7 – YC-252 – – – BXF-41T-(P)0.7 LEJ-7 – 942 943 Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series YRS-110 Hand tools for loose piece terminals YC series Extraction and Insertion tools for loose piece terminals YRM series YRF series – – WC & JUC series JUK's Hand Tools Extraction tool Terminal in loose form model No. Insertion tool YC-110R (for AWG #26, #24) SXH-001T-P0.6 WC-110 BXH-001T-P0.6 XJ-06 – – YC-111R (for AWG #24, #22) SXH-001T-P0.6N – – – – – XJ-06 SXH-002T-P0.6 YRS-480 – – – – – – XJ-06 SYF-001T-P0.6 YRS-125 – – – – – – – – SYF/M-01T-P0.5A – YC-520 – – WC-520 BYF/M-01T-P0.5A YLJ-0.5 – SYF/M-41T-P0.5A – YC-530 – – WC-530 BYF/M-41T-P0.5A YLJ-0.5 – YC-121R – – WC-121 BYM-001T-P0.6 SMJ-06 – – – BYM-01T-(P)0.7 LEJ-7 – SYM-001T-P0.6 YRS-121 SYM-01T-P0.7 – YC-251 SYM-41T-P0.7 – YC-252 – – – BYM-41T-(P)0.7 LEJ-7 – SZF/M-01T-P0.7 – YC-390R – – – BZF/M-01T-(P)0.7 ZLJ-07S – – YC-380R – BZF/M-41T-(P)0.7 ZLJ-07S SZF/M-41T-P0.7 – – – SZH-002T-P0.5 YRS-491 – – – WC-491 – – SZH-003T-P0.5 YRS-490 – – – WC-490 – – – SZN-002T-P0.7K YRS-541 – – – – – – – SZN-003T-P0.7K YRS-540 – – – – – – – 944 – – 945