SSP6201P502PR

SSP6201 250mA Low Power LDO Features  Low voltage drop: 0.17V@100mA  Low Quiescent Current: 2.0uA  High input voltage: 12V  Output voltage accuracy: tolerance ±2%  Low temperature coefficient  Built-in current limiter  Large Output Current: >0.5A  SOT-89-3L package Applications  Battery-powered equipment  GRS Receivers  Hand-Hold Equipment  Wireless LAN General Description The SSP6201 consists of a high-precision voltage output, three-pin regulators, that provide a high reference, an error amplification circuit, and a current even when the input/output voltage current limited output driver. Transient response to differential is small. Low power consumption and high accuracy is achieved through CMOS and laser trimming technologies. IN The SSP6201 series is a group of positive voltage load variations have improved in comparison to the existing series. SOT-89-3L packages is PR O available. Selection Table Part No. Output Voltage 3.0V SSP6201P332PR 3.3V SSP6201P402PR 4.0V SSP6201P452PR 4.5V SOT-89-3L SI SSP6201P302PR Package Marking 130N 133N 140N 145N SSP6201P502PR 5.0V Order Information SSP6201P①②③④⑤ Designator Symbol Description ① ② Integer Output Voltage(2.1V~5.0V) ③ 2 ④ P Output voltage accuracy: tolerance ±2% Package:SOT-89-3L R RoHS / Pb Free G Halogen Free ⑤ 150N Note:”①②” stands for output voltages. Other voltages can be specially customized Ver1.6 1 Shanghai Siproin Microelectronics Co. SSP6201 250mA Low Power LDO SI PR O Pin Assignment IN Block Diagram Absolute Maximum Ratings Supply Voltage ................................-0.3V to 15V Storage Temperature ..................-40℃ to 125℃ Operating Temperature .................-40℃ to 85℃ Note: These are stress ratings only. Stresses exceeding the range specified under “Absolute Maximum Ratings” may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. Ver1.6 2 Shanghai Siproin Microelectronics Co. SSP6201 250mA Low Power LDO Electrical Characteristics SSP6201 for any output voltage （Ta=25℃） Parameter Symbol Output Voltage Vout Output Current*1 Iout Low dropout*2 Vdrop Line Regulation ∆VOUT ∆V IN × VOUT Load Regulation △Vout Output voltage 1.0mA≤Iout≤30mA Typ. Max. Unit Vout×0.98 -- Vout×1.02 V -- mA Vin-Vout=1V -- 250 Refer to the next table 1.6V≤Vin≤8V Iout=100mA Vin= Vout+1V 1.0mA≤Iout≤100mA Iout=30mA 0℃≤Ta≤70℃ F=1KHz PSRR Vin=Vout+1V PR O PSRR Min. -- 0.05 0.2 %/V -- 12 30 mV IN Coefficiency Input Voltage Vin=Vout+1V ∆VOUT ∆Ta Temperature Supply Current Conditions -- ±100 -- Ppm/℃ -- 40 -- dB Iss1 -- -- 2 -- uA Vin -- -- -- 15 V SI Electrical Characteristics by Output Voltage： Output Voltage Vout(V) Conditions Typ. Max. Vout ≤ 2.0V Iout=60 mA 0.1 0.12 2.0 < Vout ≤ 3.0 Iout=80 mA 0.12 0.14 0.16 0.18 0.17 0.18 0.21 0.24 0.20 0.22 0.7 0.75 0.72 0.76 3.0 < Vout ≤ 4.0 4.0 < Vout ≤ 5.0 3.0 < Vout ≤ 4.0 4.0 < Vout ≤ 14.0 3.0 < Vout ≤ 4.0 4.0 < Vout ≤ 14.0 Ver1.6 Dropout Voltage Vdif（V） Iout=100 mA Iout=200 mA Iout=500 mA 3 Shanghai Siproin Microelectronics Co. SSP6201 250mA Low Power LDO Typical Application Note1:Input capacitor CIN=1uF. Note2:Ouput capacitor COUT=1uF/6.8uF(1uF Tantalum capacitor or 6.8uF ceramic capacitor is recommended). SI PR O IN Typical Performance Characteristics Ver1.6 4 Shanghai Siproin Microelectronics Co. SI PR O IN SSP6201 250mA Low Power LDO Ver1.6 5 Shanghai Siproin Microelectronics Co. SSP6201 250mA Low Power LDO Package Information SI PR O IN 3-pin SOT-89-3L Outline Dimensions Ver1.6 6 Shanghai Siproin Microelectronics Co.