102990038

Page 1 of 2 Bus Pirate v3.6 universal serial interface SKU: 102990038 (images/product/Bus Pirate v3.6interface_01.jpg) Page 2 of 2 Bus Pirate v3 (http://dangerousprototypes.com/docs/Bus_Pirate) is a universal bus interface that talks to electronics from a PC serial terminal. Get to know a chip without writing code. Eliminates a ton of early prototyping effort with new or unknown chips. A laser cut acrylic case for Bus Pirate v3.6 (http://www.seeedstudio.com/depot/bus-pirate-v36-acrylic-case-v1-dp6037-p-1229.html?cPath=178_184% EF%BC%89) is also available. Protocols 1-Wire, I2C, SPI, JTAG, asynchronous serial (UART), MIDI, PC keyboard, HD44780 LCDs, and generic 2- and 3-wire libraries for custom protocols. Features • • • • • • • • • • • • • • • • • USB interface, USB powered 5volt tolerant pins 0-6volt measurement probe 1Hz-40MHz frequency measurement 1kHz-4MHz pulse-width modulator, frequency generator On-board multi-voltage pull-up resistors On-board 3.3volt and 5volt power supplies with software reset Macros for common operations Bus traffic sniffers (SPI, I2C) Transparent USB to serial bridge mode 10Hz-1MHz low-speed logic analyzer Custom support in AVRDUDE (http://savannah.nongnu.org/projects/avrdude) , Flashrom (http://www.flashrom.org/Flashrom) , OpenOCD (http://openocd.berlios.de/web/) AVR STK500 v2 programmer clone Scriptable from Perl, Python, etc. A bootloader for easy USB firmware updates Uses DP6037 standard PCB layout (http://dangerousprototypes.com/docs/Sick_of_Beige_standard_PCB_sizes_v1.0) Open source (CC 0/Public Domain) http://www.seeedstudio.com/depot/Bus-Pirate-v36-universal-serial-interface-p-609.html?c... 1/11/2016