701925

  Documentation Installation guide Drivers and Support   Application Hardware debug Software development Flash Programming   XDS510USB PLUS JTAG Emulator with Code Composer Studio C2000 version 3.3 Warranty: 1 year from date of purchase   Part #: 701925 Rev Level: B XDS510USB PLUS JTAG Emulator with Code Composer Studio C2000 version 3.3 System Features Provides a complete development environment for Texas Instruments C2000 family of Digital Signal Controllers with JTAG interface: LF240xA F281x Hardware Features Operates off PC/laptop USB port, no internal adapter required USB bus powered, no power supply required Supports USB 1.x and USB 2.0 (high speed) What's Included Code Composer Studio C2000 version 3.3 XDS510USB PLUS JTAG Emulator 14-pin Target Adapter JTAG Cable USB cable CD-ROM with drivers F280xx Advanced emulation controller provides high performance F283xx Compatible with +1.8V to Warranty registration card F280x Setup instructions +5V processors Software Features Code Composer Studio™ C2000 version 3.3 from Texas Instruments. Supports Code Composer Studio™ C2000 On-Chip flash Programmer One LED provides operational status Replaceable JTAG cables Programmable TCK Frequency up to 32 MHz Do You Need ? 4 Channel JTAG Expander DSP Target Board (EVM, eZdsp, DSK) Compatible with Spectrum Digital “SDFlash” Programming utility Compatible with ‘C’ Language “XMLGUI” interface Compatible with Windows 2000, XP, and Vista(32/64 bit) © 2002-2013 Spectrum Digital, Inc. All Rights Reserved. http://www.spectrumdigital.com/product_info.php?&products_id=209&osCsid=0927c6fc958f227f0a1a039fa708597b&printer_friendly=true[6/4/2013 9:27:05 AM]