ISD-DMK_2360_Q

ISD-DEMO2360 USER MANUAL REV_1.0 ISD-DEMO2360 User Manual The information contained in this document is the exclusive intellectual property of Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton. Nuvoton provides this document for reference purposes only in the design of ISD ChipCorder® microcontroller-based systems. Nuvoton assumes no responsibility for errors or omissions. All data and specifications are subject to change without notice. For additional information, please contact: Nuvoton Technology Corporation at Publication Release Date: Jan 15, 2013 -1- Revision 1.0 ISD-DEMO2360 USER MANUAL REV_1.0 Contents 1. Overview ............................................................................................................................................... 3 2. Board Description ................................................................................................................................. 5 2.1. ISD-DEMO2360_QFN32 for QFN32 package..................................................................................... 5 2.1.1. 2.2. ISD-DEMO2360_SOP16 for SOP16 package ...................................................................................... 6 2.2.1. 2.3. 3. ISD-DEMO2360_QFN32 Jumper Description ................................................................................ 5 ISD-DEMO2360_SOP16 Jumper Description................................................................................. 6 2x5 connector pin assignment .......................................................................................................... 7 Operation Description........................................................................................................................... 7 3.1. Software Installation ......................................................................................................................... 7 3.2. Operation under VPE ........................................................................................................................ 8 4. ISD-DEMO2360 board schematic ........................................................................................................ 10 4.1. ISD-DEMO2360_QFN32 schematic ................................................................................................. 10 4.2. ISD-DEMO2360_SOP16 schematic .................................................................................................. 11 5. Appendix: ISD-VPE Video Tutorial ....................................................................................................... 12 6. Revision History .................................................................................................................................. 13 Publication Release Date: Jan 15, 2013 -2- Revision 1.0 ISD-DEMO2360 USER MANUAL REV_1.0 1. Overview The ISD2360 demo board is a small board dedicated for ISD2360 device evaluation and application development. The ISD2360 comes in two packages: QFN32 and SOP16, hence there are two types of demo boards for the ISD2360. - For QFN32 package: ISD-DEMO2360_QFN32 – shown in Picture 1-1 ISD- DEMO2360_QFN32 - For SOP16 package: ISD-DEMO2360_SOP16 – shown in Picture 1-2 Picture 1-1 ISD-DEMO2360_QFN32 Picture 1-2 ISD-DEMO2360_SOP Publication Release Date: Jan 15, 2013 -3- Revision 1.0 ISD-DEMO2360 USER MANUAL REV_1.0 The ISD2360 evaluation kit consists of three parts: - ISD-DEMO2360 (QFN or SOP) ISD-ES_MINI_USB: a small interface board providing USB connection to PC ISD-VPE2360: free downloadable GUI evaluation software for ISD2360. The ISD2360 demo board connecting to the ISD-ES_MINI_USB board, along with the ISDVPE2360, makes up a small but complete evaluation system for ISD2360, as shown in Picture 1-3 A complete ISD2360 evaluation system. Picture 1-3 A complete ISD2360 evaluation system Publication Release Date: Jan 15, 2013 -4- Revision 1.0 ISD-DEMO2360 USER MANUAL REV_1.0 2. Board Description 2.1. ISD-DEMO2360_QFN32 for QFN32 package 2.1.1. ISD-DEMO2360_QFN32 Jumper Description J1 – 2-pin power connector, to connect battery pack or external power supply J2 – 2-pin speaker connector directly connecting to ISD2360 PWM output J3 – Audio jack directly connecting to ISD2360 PWM output J4 – 2x5 10-pin connector connecting to ISD-ES_MINI_USB dongle Publication Release Date: Jan 15, 2013 -5- Revision 1.0 ISD-DEMO2360 USER MANUAL REV_1.0 J5 – Reserved, not to be used. 2.2. ISD-DEMO2360_SOP16 for SOP16 package 2.2.1. ISD-DEMO2360_SOP16 Jumper Description J2 – 2x5 10-pin connector connecting to ISD-ES_MINI_USB dongle J3 – Audio jack directly connecting to ISD2360 PWM output J4 – 2-pin speaker connector directly connecting to ISD2360 PWM output J7 – Reserved, not to be used. J8 – 2-pin power connector, to connect battery pack or external power supply Publication Release Date: Jan 15, 2013 -6- Revision 1.0 ISD-DEMO2360 USER MANUAL REV_1.0 2.3. 2x5 connector pin assignment The ISD2360 demo board can be connected to ISD USB dongle via a 2x5 10-pin connector. Table 2-1 shows the pin assignment. Pin No Pin Name 01 NC 02 RDY_BSYB/GPIO4 03 INTB/GPIO3 04 SSB 05 MOSI/GPIO0 06 MISO/GPIO2 07 SCLK/GPIO1 08 V33 09 GND 10 GND Table 2.3-1 Pin Assignment for 2x5 connector 3. Operation Description 3.1. Software Installation  Software Download The ISD2360 user can use ISD-VPE2360 (VPE stands for Voice Prompt Editor) GUI software to control the demo board, and fully evaluate the ISD2360 device. The ISD-VPE2360 software is freely downloaded from Nuvoton website, or from the link below: https://www.filesanywhere.com/FS/v.aspx?v=8a6e688761676eb6a4ad. During the software installation, user will be prompted for username and password. The user should email Nuvoton ChipCorder team at ChipCorder@nuvoton.com, to request Publication Release Date: Jan 15, 2013 -7- Revision 1.0 ISD-DEMO2360 USER MANUAL REV_1.0 the username and password. In the email user should provide the detailed company name and company address, city, including country name if outside of US. This information is required by Nuvoton to generate the username and password and to contact the user for future software updates.  System Requirements The ISD-VPE2360 is PC windows application software; it currently supports Windows XP, Windows 7- 32bit, and Windows 7- 64bit. 3.2. Operation under VPE The user can follow the sequence below to launch the ISD2360 VPE and start evaluating the ISD2360 chip functionality with the ISD-DEMO2360 board. - Connect a demo board to USB dongle Plug in USB dongle into a PC USB port Launch VPE To connect demo board with the USB dongle, both board need to face up for the connection. Please refer to Picture 3.2-1 Demo board connects to USB dongle board with both boards facing upbelow. Publication Release Date: Jan 15, 2013 -8- Revision 1.0 ISD-DEMO2360 USER MANUAL REV_1.0 Picture 3.2-1 Demo board connects to USB dongle board with both boards facing up Publication Release Date: Jan 15, 2013 -9- Revision 1.0 ISD-DEMO2360 USER MANUAL REV_1.0 4. ISD-DEMO2360 board schematic 4.1. ISD-DEMO2360_QFN32 schematic Publication Release Date: Jan 15, 2013 - 10 - Revision 1.0 ISD-DEMO2360 USER MANUAL REV_1.0 4.2. ISD-DEMO2360_SOP16 schematic Publication Release Date: Jan 15, 2013 - 11 - Revision 1.0 ISD-DEMO2360 USER MANUAL REV_1.0 5. Appendix: ISD-VPE Video Tutorial There are ISD-VPE video tutorials available online which can help users who are new to the ISDVPE GUI software. Users can access these video tutorials using the web links below: o o o A Simple VPE project: A GPIO Trigger project: Record and playback project: https://www.youtube.com/watch?v=BXTa7Kaux0o https://www.youtube.com/watch?v=XVDcPGpHtkI https://www.youtube.com/watch?v=o-L-6L3TXvc Publication Release Date: Jan 15, 2013 - 12 - Revision 1.0 ISD-DEMO2360 USER MANUAL REV_1.0 6. Revision History Version Date Description 1.0 Jan 15, 2013 First Release Publication Release Date: Jan 15, 2013 - 13 - Revision 1.0