MCBSTM32F400

MCBSTM32F400 The Keil MCBSTM32F400 Evaluation Board enables you to create and test working programs based on the STMicroelectronics STM32 F4xx series of ARM Cortex™-M4 processor-based devices. Features 168MHz STM32F407IG ARM Cortex™-M4 processor-based MCU in 176-pin BGA On-Chip Memory: 1MB Flash & 192KB RAM External Memory: 8MB NOR Flash, 512MB NAND Flash, 2MB SRAM, 8KB I2C EEPROM with NFC interface 2.4 inch Color QVGA TFT LCD with resistive touchscreen 10/100 Ethernet Port USB 2.0 Full Speed - USB, USB-OTG, & USB Host USB 2.0 High Speed - USB, USB-OTG, & USB Host 1 CAN Interface Serial/UART Port MicroSD Card Interface 5-position Joystick 3-axis digital Accelerometer 3-axis digital Gyroscope Analog Voltage Control for ADC Input (potentiometer) Audio CODEC with Line-In/Out and Speaker/Microphone Digital Microphone Digital VGA Camera Push-Buttons for Reset, Wakeup, Tamper and User 8 LEDs directly connected to port pins Power Supply via:                        High Speed and Full Speed USB (micro) connectors Power jack (8V-12V) with Voltage Regulator capable to supply both USB host interfaces (500mA each) Debug Interface Connectors   20 pin JTAG (0.1 inch connector) 10 pin Cortex debug (0.05 inch connector)  20-pin Cortex debug + ETM Trace (0.05 inch connector) Evaluation Software The MCBSTM32F400 Evaluation Board and Starter Kit include the MDK-Lite development tools. These tools help you get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCBSTM32F400 and a Quickstart guide are included. Ordering Information The MCBSTM32F400 is available as a stand alone evaluation board or as a starter kit which includes the ULINK-ME debug adapter.  MCBSTM32F400: MCBSTM32F400 evaluation board  MCBSTM32F400UME: MCBSTM32F400 starter kit (includes ULINK-ME)