ARM-JTAG-SWD

ARM JTAG OPEN OCD SWD ADAPTER Page 1 of 2 ARM-JTAG-SWD ARM JTAG SWD ADAPTER FOR OPENOCD AND CROSSWORKS FEATURES • Plug-in adapter for ARM-USB-OCD, ARM-USB-OCD-H, ARM-USB-TINY, ARM-USBTINY-H which allow ARM processors which support SWD (like LPC1343) to be programmed/debugged • works with ROWLEY Cross Works • dimensions 50x40 mm (2x1.6") + 20 cm (8") JTAG cable DOCUMENTS: • IMPORTANT: Connect the adapter to Olimex programmers in the following way - JTAG Programmer - SWD interface - JTAG cable; i.e. connect the SWD adapter directly to the programmer with no cable in-between them! HARDWARE: • ARM-JTAG-SWD schematic SOFTWARE: http://www.olimex.com/dev/arm-jtag-swd.html 6/18/2012 ARM JTAG OPEN OCD SWD ADAPTER Page 2 of 2 • CrossWorks - Rowley Crossworks support SWD with any of our OCD JTAGs and ARMJTAG-SWD FAQ: Q: Does ARM-JTAG-SWD works with ARM-JTAG-EW? A: No, this is not necessary as ARM-JTAG-EW supports SWD without need of adapter board. Q: Does ARM-JTAG-SWD work with OpenOCD? A: For the moment only Rowley CrossWorks support ARM-JTAG-SWD, but the support in OpenOCD is easy to be implemented and this will happen soon ;) ORDERING CODES: ARM-JTAG-SWD Completely assembled and tested http://www.olimex.com/dev/arm-jtag-swd.html 6/18/2012