BB-BONE-SERL-01

BeagleBone CANBus - BEAGLE BOARD TOYS Page 1 of 3 BeagleBone CANBus From BEAGLE BOARD TOYS WIKI Contents        1 Descriptions 2 Specifications  2.1 Electrical Specifications  2.2 Mechanical Specifications 3 Signal Usage 4 EEPROM 5 Distributors 6 Product Images 7 Documentations  7.1 BeagleBone CANBus Revision A Descriptions The BeagleBone CANBus Cape makes use of DCAN1 interface of the AM335x processor. The CAN Bus interface can be accessed via a standard DSub 9 female serial connector. This connector is located to the side so it doesn't interfere with any Capes stacked above it. The BeagleBone CANBus Cape will support SocketCAN. Specifications Electrical Specifications Power 3.3V via expansion header Indicators Power LED Connectors Two 46-position connectors One 10-position connector Mechanical Specifications 5/23/2012 BeagleBone CANBus - BEAGLE BOARD TOYS Size 3.40" x 2.45" Layers 4 PCB Thickness .062" Page 2 of 3 RoHS Compliant Yes Signal Usage Pin Usage is coming soon. EEPROM EEPROM Suport Yes Board Name BeagleBone CANBus Cape Version 00A0 Manufacturer BeagleBoardToys Part Number BB-BONE-SERL-01 Pins Used TBD Distributors Distributor list will be posted soon. Product Images BeagleBone CANBus 5/23/2012 BeagleBone CANBus - BEAGLE BOARD TOYS Page 3 of 3 Note: These photos are from the alpha build. Production build photos will be updated soon. Documentations BeagleBone CANBus Revision A Documentations coming soon. Retrieved from "http://beagleboardtoys.com/wiki/index.php?title=BeagleBone_CANBus"    This page was last modified on 16 May 2012, at 00:01. This page has been accessed 55 times. Content is available under GNU Free Documentation License 1.3 or later. 5/23/2012