0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
FFS.01.160.DA

FFS.01.160.DA

  • 厂商:

    LEMO(雷莫)

  • 封装:

    -

  • 描述:

  • 数据手册
  • 价格&库存
FFS.01.160.DA 数据手册
00 NIM-CAMAC & 01 COAXIAL CONNECTORS ® ® LEMO coaxial 00 and 01 Series ( 50 Ω ) Fundamental research in particle physics as practised within CERN and other nuclear research establishments requires more and more complex equipment of high performance in order to achieve the objectives. The needs of such research contribute to the development of leading products for the whole of industry. For many years LEMO has participated in this evolution. This has resulted in a range of miniature coaxial connectors (50 Ω) with a push-pull self-latching system, the LEMO 00.250 series. These connectors now form the basis of the NIM-CAMAC CD/N 549 standard. The plugs and sockets of the 01 series are amongst the smallest available 50 Ω coaxial connectors with a self-latching intermating capability. In spite of their small size and light weight, their technical characteristics remain excellent. Available in a wide range of housing configurations, they are especially useful when connecting onto printed circuit boards. The LEMO 00 series and 01 are now used in many areas such as : telecommunications, sensors, medical equipment, space research, etc... The program covered in this catalog now includes more than 50 models suitable for many cable types. Table of Contents 2 steps to select the right connector ................................................................................................................................................................................3 00.250 (NIM-CAMAC CD/N 549) Series Part numbering system ........................................................................................................................................................................................... 7 Metal housing models ............................................................................................................................................................................................. 8 Plastic housing models ......................................................................................................................................................................................... 21 Watertight or vacuumtight models ....................................................................................................................................................................... 22 Metal housing models with mechanical keying .................................................................................................................................................... 24 Threaded-latching models .................................................................................................................................................................................... 26 Adaptors ............................................................................................................................................................................................................... 27 Variant .................................................................................................................................................................................................................. 30 Assembled cables ................................................................................................................................................................................................ 31 Accessories .......................................................................................................................................................................................................... 31 Spare parts ........................................................................................................................................................................................................... 33 Tooling .................................................................................................................................................................................................................. 35 Panel cut-outs ...................................................................................................................................................................................................... 38 Cable assembly .................................................................................................................................................................................................... 39 01.250 (Minax) Series Part numbering system ......................................................................................................................................................................................... 45 Metal housing models .......................................................................................................................................................................................... 46 Threaded-latching models ................................................................................................................................................................................... 50 Adaptors ............................................................................................................................................................................................................... 50 Spare parts ........................................................................................................................................................................................................... 51 Tooling .................................................................................................................................................................................................................. 52 Panel cut-outs ...................................................................................................................................................................................................... 53 Cable assembly .................................................................................................................................................................................................... 53 Technical characteristics Outer shell ............................................................................................................................................................................................................. 55 Insulator ................................................................................................................................................................................................................ 56 Electrical contact .................................................................................................................................................................................................. 56 Cable fixing ........................................................................................................................................................................................................... 58 Technical tables (VSWR) ....................................................................................................................................................................................... 58 Product safety notice ........................................................................................................................................................................................... 59 www.lemo.com 1 ® ® Precision modular connectors to suit your application Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in more than 80 countries with the help of over 40 subsidiaries and distributors. Over 50’000 connectors The modular design of the LEMO range provides over 50’000 connectors from miniature ø 3 mm to ø 50 mm, capable of handling cable diameters up to 30 mm and for up to 106 contacts. This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommunications and military. LEMO’s Push-Pull Self-Latching Connection System This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute security against vibration, shock or pull on the cable, and facilitates operation in a very limited space. The LEMO self-latching system allows the connector to be mated by simply pushing the plug axially into the socket. Fv: average latching force Once firmly latched, connection cannot be broken by pulling on the cable or any other component part other than the outer release sleeve. Fa: average pull force with axial pull on the collet nut When required, the connector is disengaged by a single axial pull on the outer release sleeve. This first disengages the latches and then withdraws the plug from the socket. Fd: average unmating force with axial pull on the outer release sleeve. Series Force Fv 00 9N Force Fa 00 120N 01 5N Series 01 110N Series Force Fd 00 7N 01 6N 1N = 0,102 kg. Force measured according to the standard IEC 60512- test UL Recognition LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO connector, cable and your equipment) will be easier because LEMO connectors are approved. CE marking CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or several European safety directives. CE marking applies to complete products or equipment, but not to electromechanical components, such as connectors. RoHS LEMO connector specifications exceed the requirements of the RoHS directives (2002/95/EC) of the European Parliament and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical and electronic equipment marketed in Europe. LEMO guarantees that its connectors are free of mercury, cadmium, lead, hexavalent chromium and polybromide biphenyl (PBB), polybromide diphenyl ether (PBDE), or DecaBDE. 2 www.lemo.com ® ® 2 steps to select the right connector ● Step 1: Select connector series Select the appropriate LEMO connector series according to the standard, the cable, according to the application or the mated connector already on your equipment. . 250 . . Part number coding 00 or 01 series The NIM-CAMAC 00 .250 series The 00 series is coaxial (50 Ω ). This connectors family was conceived for all applications where a high density of connectors is necessary, especially for patch panels. Because of LEMO’s special self-latching system, it is possible to connect them with a simple axial push-pull thereby reducing the space needed to mount sockets to an absolute minimum, up to 50 sockets per square decimetre. LEMO 00 connectors served as the norm for NIM-CAMAC CD/N549 standard, used in nuclear physics as well as many other applications. The miniature 01.250 series The 01 series is coaxial (50 Ω ). The plugs and sockets are amongst the smallest available 50 Ω coax connectors with a self-latching intermating capability. In spite of their small size and light weight, their technical characteristics remain excellent. Available in a wide range of housing configurations, they are especially useful when connecting onto printed circuit boards. Series Standard 00 00 01 NIM-CAMAC – – indoor indoor indoor Protection 1) IP50 IP50 IP50 Ingress Protection 2) IP64 IP50 IP64 Temperature range - 55 to 260°C - 55 to 260°C - 55 to 230°C – Yes – Environment Ingress Keying Push-Pull self-latching Latching Contact type Solder, crimp or print Solder, crimp or print Solder or print Cable fixing type Clamping or crimping Crimping Crimping Note: 1) 2) IP50 = Protection from the amount of dust that would interfer with the operation of the equipment Ingress protection between LEMO socket and your device (IP64 = protection from splashed water and dust tight) www.lemo.com 3 ® ® ● Step 2 : Complete the part number Complete the part numbering by choosing the model depending on your cable and the application. . 250 . . Part number coding Verify the fitting to your cable and cable wire conductor screen dielectric sheath Recommended coaxial cables Electrical and general properties Non standard Standard MIL-C-17 RG 58 C/U RG 142 B/U RG 174 /U RG 174 A/U RG 178 B/U RG 179 B/U RG 187 A/U RG 188 A/U RG 195 A/U RG 196 A/U RG 316 /U Huber+Suhner Huber+Suhner Storm IEC 60096-2 CCTU 10-01A 50.3.1 KX 15 50.2.1 50.2.1 50.1.1 75.2.1 75.2.2 50.2.3 KX 38 KX 3A KX 21A 50.1.2 50.2.2 KX 22A G02232D-60 K01152-07 421-099 LEMO Cable group LEMO Part-No CCX.50.RG5.8CU50N CCX.50.RG1.42BU50M CCX.50.RG1.74U25N CCX.50.RG1.74AU27N CCX.50.RG1.78BU18M CCX.75.RG1.79BU26M CCX.75.RG1.87AU26B CCX.50.RG1.88AU24B CCX.95.RG1.95AU37B CCX.50.RG1.96AU20B CCX.50.RG3.16BU26M Operating Temperature °C voltage Impedance Capacitance Attenuation Ohm pF/m db/100 m at 100 MHz U max. KV eff. from to 00 6 7 3 8 1 2 2 4 5 1 4 50 ± 2 50 ± 2 50 ± 2 50 ± 2 50 ± 2 75 ± 3 75 ± 3 50 ± 2 95 ± 5 50 ± 2 50 ± 2 101 95 101 101 96 64 64 96 49 96 96 23 12.8 35 31.5 48 33 33 33 17 48 33 1.90 1.50 2.50 1.50 0.70 1.20 1.20 1.20 1.50 0.70 1.20 -25 -70 -40 -25 -90 -90 -50 -50 -90 -50 -90 +70 +200 +75 +70 +205 +205 +205 +205 +205 +205 +205 • • • • • • • • • • • 8 9 8 50 ± 2 50 ± 5 50 ± 2 101 96 96 24 72 72 1.50 0.45 2.50 -40 -45 -40 +105 +165 +75 • • • Series 01 • • • • • • • • Mechanical properties Non standard Standard RG 58 C/U 4 Dielectric Conductor Type Screen Sheath Stranding ø mm Mat. ø mm Mat. ø mm Mat. Colour ø mm kg/100m. CuSn 19 x 0.18 0.90 PE 2.92 CuSn 3.6 PVC black 4.95 3.80 1st : 3.53 2 nd : 4.20 FEP 4.95 6.60 PVC1 PVC2 FEP FEP PFA PFA PFA PFA FEP black black brown brown white white white white brown 2.55 2.80 1.80 2.60 2.60 2.60 3.70 2.00 2.60 1.10 0.85 1.50 1.60 1.60 2.80 1.10 1.60 PVC grey 3.10 2.10 PFA white 1.25 0.90 3.05 1.95 RG 142 B/U CuStAg solid 0.95 PTFE 2.95 CuAg CuAg RG 174 U RG 174 A/U RG 178 B/U RG 179 B/U RG 187 A/U RG 188 A/U RG 195 A/U RG 196 A/U RG 316 /U CuSt CuSt CuStAg CuStAg CuStAg CuStAg CuStAg CuStAg CuStAg 7 x 0.16 7 x 0.16 7 x 0.10 7 x 0.10 7 x 0.10 7 x 0.18 7 x 0.10 7 x 0.10 7 x 0.18 0.48 0.48 0.30 0.30 0.30 0.54 0.30 0.30 0.54 PE PE PTFE PTFE PTFE PTFE PTFE PTFE PTFE 1.50 1.50 0.87 1.50 1.50 1.50 2.52 0.87 1.50 CuSn CuSn CuAg CuAg CuAg CuAg CuAg CuAg CuAg 2.0 2.0 1.4 2.0 2.0 2.0 3.1 1.37 2.1 G02232D-60 Cu 7 x 0.16 0.50 PE 1.50 CuAg 7 x 0.06 0.19 PFA 0.52 CuStAg 7 x 0.16 0.50 PTFE 1.52 CuAg CuSn CuAg CuAg CuAg 1 st : 1.95 2 nd : 2.40 0.9 1 st : 2.00 2 nd : 2.50 K01152-07 421-099 Weight Mat. FEP www.lemo.com 00 SERIES (NIM-CAMAC) ® www.lemo.com ® 5 ® ® 00 Series (NIM-CAMAC CD/N 549) The 00 series is a range of 50 Ω coaxial connectors. They are suitable for a wide variety of applications particularly in measurement, control system and nuclear physics, having formed the basis for the NIM-CAMAC CD/N 549 standard. LEMO 00 connectors offer customers many benefits including: – Self-latching push-pull system – Aesthetically pleasing appearance – Small size – High packing density – Rugged construction – Ease of use – Low weight – Reliable performances – Wide choice to suit application Metal housing models (page 8) Fixed plugs Straight plugs Fixed sockets Elbow sockets FAA FFA ERA, ERE EPL, EPM, EPK, EPR FAN FFA ERN FAB FFA ERC FPA FFC ERT FPL FFC ERX Free sockets Fixed coupler PCA RAD Free coupler PCS RMA EPS Straight and elbow plugs with socket Fixed sockets EPN PSA EPY FTR PSS Plugs with resistor Elbow plugs FFY PES ECP FTA FRT FLA FFE EHP PFS FLS.NTAE FFF FLS, FLV FLR ELF FFS FTL PLK EPA, EPB, EPC Socket with microswitch FTY EPE ERM Plastic housing models* (page 21) Threaded latching models* (page 26) Adaptors Straight plug Fixed socket Straight plug (See page 27) FFA ERN FVS Watertight or vacuumtight models (page 22) Straight sockets HGP Straight coupler HEP HGW EWF EWV VPS SWH Metal housing models with mechanical keying* (page 24) Straight plug Elbow sockets FSG XBG Fixed sockets XRG XSG EXG ESG PSG * not included in NIM-CAMAC standard 6 www.lemo.com ® ® Part Numbering System Plug FFA . 00 . 250 . N T A C 29 Free socket PCA . 00 . 250 . N T L C 29 Variant: (page 30) Cable ø Collet type: C = with cable collet clamping E = with cable crimping K, D = with oversize cable collet Fixed socket ERA . 00 . 250 . N T Contact type : A = male solder C = male crimp L = female solder M = female crimp L Variant: (page 30) Fixed coupler RAD . 00 . 250 . N Contact type : A = male solder D = male print L = female solder N = female print T M Model: (page 8) Variant: (page 30) Series: 00 Contact type : A = male-female E = male-male-female 3) F = female-female-male L = female-male M = female-female Insert configuration : 250 = coaxial ( 50 Ω ) Housing : N = brass nickel-plated 4) C = brass chrome-plated 4) 1) D = brass gold-plated 5) K = brass black chrome 1) G = PEEK 2) Insulator: T = PTFE L = PEEK 5) Note: 1) 2) 3) 4) 5) Part Number Example treatment not available for the printed circuit models available for the FFA and ERN model only used only for models: FTA, FTL and FTY. standard non-standard, on request only FFA.00.250.NTAC29 = straight plug with cable collet, series 00, coaxial type (50 Ω), outer shell in nickel-plated brass, PTFE insulator, male solder contact, C type collet of 2.9 mm diameter. Part Section Showing Internal Components 1 2 3 4 3 4 5 Fixed socket outer shell earthing crown retaining ring hexagonal nut 5 6 7 7 6 www.lemo.com 2 1 1 locking washer insulator female contact 1 2 3 4 7 6 2 5 4 8 3 Plug with cable clamping 5 rear insulator outer shell 6 insulator latch sleeve 7 male contact collet nut earthing sleeve 8 collet 1 6 5 4 2 3 7 Plug with cable crimping outer shell 5 insulator 6 male contact 2 latch sleeve 3 crimp backnut 7 crimp ferrule 4 rear insulator 1 7 ® ® Metal housing models Technical Characteristics Mechanical and climatical Characteristics Electrical Value Standard Test Characteristics Impedance Operating voltage (50 Hz) Test voltage (50 Hz) Rated current Contact resistance Shell electrical continuity Insulating resistance VSWR Shielding efficiency Contact retention force Cable pull off force 1) Connector pull off force > 18 N > 100 N > 90 N IEC 60512-8 IEC 60512-9 IEC 60512-8 15a 17c 15f Endurance > 5000 cycles IEC 60512-5 9a - 55°C + 260°C Operating temperature Note : 1) depending on cable design Value Standard Test 50 Ω – 0.7 kV rms – 2.1 kV rms IEC 60512-2 4A IEC 60512-3 < 6 mΩ IEC 60512-2 < 3.5 mΩ IEC 60512-2 > 1012 Ω IEC 60512-2 see chart N°1 below see chart N°2 below 4a 5a 2a 2f 3a Voltage Standing Wave Ratio The VSWR (Voltage Standing Wave Ratio) is the value representing the power reflected in a connection. The VSWR varies with frequency, in most cases, the working frequency range is where VSWR is ≤ 1.25. 1 Shielding efficiency (EMC properties) in dB (transfer impedance in dBohm) The shielding efficiency is the ratio between the electromagnetic field inside the connector and a power source at the outside of the connector (or vice versa). VSWR 2 1.3 75 Ω 50Ω 1.2 (dBΩ) -10 (dB) 60 -20 80 -30 100 1.1 -40 0.01 0.1 1 10 120 1000 f (MHz) 100 1.0 500 1000 FFA + PCA 1500 f FFS + PCS FFV + PCS FFS + PCS Note : value for connectors with PTFE insulator. VSWR measured 50 Ω with a RG-174 A/U cable and 75 Ω with a RG-179 B/U cable. Measured according to IEC-60169-1-1. Note : measured according to IEC-60169-1-3 standard. FFA Straight plug with cable collet Part number FFA.00.250.NTAC15 FFA.00.250.NTAC17 FFA.00.250.NTAC22 FFA.00.250.NTAC27 FFA.00.250.NTAC31 ~26 ø 6.4 ~18 M1 Cable group Cond. Ø max. Dielectric Ø max. 9 – 1 2-3-4 8 0.55 0.55 0.55 0.55 0.55 1.45 1.45 1.95 1.95 1.95 Sheath Ø min. max. 1.1 1.3 1.8 2.3 2.8 1.4 1.7 2.2 2.7 3.1 Cable assembly, solder contact (page 39) S 4.5 8 www.lemo.com ® ® FFA Straight plug with oversize cable collet Part number FFA.00.250.NTAK37 FFA.00.250.NTAK42 ~ 36.5 ø8 ø 6.4 ~ 28.5 S 6.5 M1 Cable group Cond. Ø max Dielectric Ø maxi 8 – 0.55 0.55 1.95 1.95 Sheath Ø mini maxi 3.0 3.3 3.6 4.1 Cable assembly, solder contact (page 39) S7 FFA Straight plug with cable collet and nut for fitting a bend relief ~33.5 ø 6.4 ~25.5 Part number Cable group Cond. Ø max Dielectric Ø maxi FFA.00.250.NTAC15Z FFA.00.250.NTAC17Z FFA.00.250.NTAC22Z FFA.00.250.NTAC27Z FFA.00.250.NTAC31Z 9 – 1 2-3-4 8 0.55 0.55 0.55 0.55 0.55 1.45 1.45 1.95 1.95 1.95 M1 Sheath Ø mini maxi 1.1 1.3 1.7 2.3 2.8 1.4 1.7 2.1 2.7 3.1 Cable assembly, solder contact (page 39) S6 Note: the bend relief must be ordered separately (see page 30). FFC Straight plug with flats on latch sleeve and cable collet Part number FFC.00.250.CTAC22 FFC.00.250.CTAC27 FFC.00.250.CTAC31 ~26 ø 6.4 ~18 S5 M3 Cable group Cond. Ø max Dielectric Ø maxi 1 2-3-4 8 0.60 0.60 0.60 1.55 1.95 1.95 Sheath Ø mini maxi 1.7 2.3 2.8 2.1 2.7 3.1 Cable assembly, solder contact (page 39) S 5.5 FFC Straight plug with flats on latch sleeve and oversize cable collet Part number FFC.00.250.CTAD42 FFC.00.250.CTAD52 FFC.00.250.CTAD56 ~34.5 ø 8.6 ø 6.4 ~26.5 S7 www.lemo.com S8 M3 Cable group Cond. Ø max Dielectric Ø maxi 5 6-7 – 1.05 1.05 1.05 3.05 3.05 3.05 Sheath Ø mini maxi 3.1 4.1 5.1 4.0 5.0 5.5 Cable assembly, solder contact (page 39) S 5.5 9 ® ® FFY Straight plug, large shell with cable collet Part number ~33 ø 8.9 ø 8.6 ~25 FFY.00.250.NTAC40 FFY.00.250.NTAC47 FFY.00.250.NTAC52 M2 S7 Cable group Cond. Ø max Dielectric Ø maxi 5 – 6-7 1.05 1.05 1.05 3.05 3.05 3.05 Sheath Ø mini maxi 3.2 3.9 4.6 3.8 4.5 5.0 Cable assembly, solder contact (page 39) S8 FFE ~33.5 ø 7.4 ~25.5 Straight plug with front sealing ring, cable collet and nut for fitting a bend relief (IP 54 protection index when mated) Part number Cable group Cond. Ø max Dielectric Ø maxi FFE.00.250.NTAC22Z FFE.00.250.NTAC27Z FFE.00.250.NTAC31Z 1 2-3-4 8 0.55 0.55 0.55 1.95 1.95 1.95 M1 Sheath Ø mini maxi 1.7 2.3 2.8 2.1 2.7 3.1 Cable assembly, solder contact (page 39) S6 Note: the bend relief must be ordered separately (see page 30). FFF Straight plug, non-latching, with cable collet Part number FFF.00.250.NTAC22 FFF.00.250.NTAC27 FFF.00.250.NTAC31 ~26 ø 6.4 ~18 M1 Cable group Cond. Ø max Dielectric Ø maxi 1 2-3-4 8 0.55 0.55 0.55 1.95 1.95 1.95 Sheath Ø mini maxi 1.7 2.3 2.8 2.1 2.7 3.1 Cable assembly, solder contact (page 39) S 4.5 FFS Straight plug for cable crimping Part number FFS.00.250.CTAE24 FFS.00.250.CTAE31 FFS.00.250.CTAE52 M5 Dim L M 31 31 34 23 23 26 Cable Cond. group Ø maxi 1 3-4 6 Dielec. Ø maxi Sheath Ø maxi 0.95 1.65 3.05 2.35 3.0 5.2 0.4 0.55 0.97 Cable assembly, solder contact (page 41) Part number L Dim M Cable Cond. Ø Dielec. Sheath group mini maxi Ø maxi Ø maxi L ø 6.4 M S 5.5 S 5.5 FFS.00.250.CTCE24 FFS.00.250.CTCE25 FFS.00.250.CTCE30 FFS.00.250.CTCE31 FFS.00.250.CTCE35 FFS.00.250.CTCE44 FFS.00.250.CTCE52 FFS.00.250.CTCE56 M4 10 31 31 31 31 31 31 34 34 23 23 23 23 23 23 26 26 1 1 2 3-4 8 5 6 7 0.28 0.28 0.28 0.46 0.46 0.28 0.90 0.90 0.4 0.4 0.4 0.55 0.55 0.4 0.97 0.97 0.95 1.15 1.65 1.65 1.65 2.65 3.05 3.05 2.35 2.35 3.0 3.0 3.35 4.35 5.2 5.45 Cable assembly, crimp contact (page 40) www.lemo.com ® ® FFV Straight plug for cable crimping with improved screen efficiency 1) Part number FFV.00.250.NTAE24 FFV.00.250.NTAE31 FFV.00.250.NTAE52 M5 L FFV.00.250.NTCE24 FFV.00.250.NTCE30 FFV.00.250.NTCE31 FFV.00.250.NTCE35 FFV.00.250.NTCE44 FFV.00.250.NTCE52 FFV.00.250.NTCE56 ø 6.4 S 5.5 S 5.5 M4 Dim M 31 31 34 Cable Cond. group Ø maxi 23 23 26 1 3-4 6 Dielec. Ø maxi Sheath Ø maxi 0.95 1.65 3.05 2.35 3.0 5.2 0.4 0.55 0.97 Cable assembly, solder contact (page 41) Part number M L L Dim M 31 31 31 31 31 34 34 Cable Cond. Ø Dielec. Sheath group mini maxi Ø maxi Ø maxi 23 23 23 23 23 26 26 1 2 3-4 8 5 6 7 0.28 0.28 0.46 0.46 0.28 0.90 0.90 0.4 0.4 0.55 0.55 0.4 0.97 0.97 0.95 1.65 1.65 1.65 2.65 3.05 3.05 2.35 3.0 3.0 3.35 4.35 5.2 5.45 Cable assembly, crimp contact (page 40) Note : 1) Screen efficiency >100dB at 1 GHz, see page 8. FLA Elbow plug (90°) with cable collet 17.5 Part number ø9 9.5 ~16 FLA.00.250.CTAC22 FLA.00.250.CTAC27 FLA.00.250.CTAC31 Cable group Cond. Ø max Dielectric Ø maxi 1 – – 0.35 0.35 0.35 1.55 1.75 1.75 Sheath Ø mini maxi 1.7 2.3 2.8 2.1 2.7 3.1 S5 M6 Cable assembly, solder contact (page 42) FLA Elbow plug (90°) with oversize cable collet 17.5 ø9 9.5 24 Part number FLA.00.250.CTAD42 FLA.00.250.NTAD52 FLA.00.250.NTAD56 S8 Cable group Cond. Ø max Dielectric Ø maxi 8 6 7 0.97 0.97 0.97 1.75 1.75 1.75 Sheath Ø mini maxi 3.1 4.1 5.1 4.0 5.0 5.5 S7 M6 Cable assembly, solder contact (page 42) ø 8.6 FLS Elbow plug (90°) for cable crimping 17.5 H 9.5 ø9 Part number FLS.00.250.NTAE31 FLS.00.250.NTAE35 FLS.00.250.NTAE52 FLS.00.250.NTAE56 M7 www.lemo.com H Cable (mm) group 15 15 18 18 – – 6 7 Cond. Ø maxi Dielectric Ø maxi Sheath Ø maxi 0.35 0.35 0.97 0.97 1.65 1.65 3.05 3.05 3.0 3.35 5.2 5.45 Cable assembly, solder contact (page 42) 11 ® ® FLV Elbow plug (90°) for cable crimping with improved screen efficiency * 17.5 Part number ø9 9.5 H FLV.00.250.NTAE31 FLV.00.250.NTAE35 FLV.00.250.NTAE52 FLV.00.250.NTAE56 M7 H Cable (mm) group 15 15 18 18 3-4 8 6 7 Cond. Ø maxi Dielectric Ø maxi Sheath Ø maxi 0.35 0.35 0.97 0.97 1.65 1.65 3.05 3.05 3.0 3.35 5.2 5.45 Cable assembly, solder contact (page 42) * Screen efficiency >100dB at 1 GHz, see page 8. FAA Straight plug, non-latching, nut fixing 15.6 13 S9 9 2 maxi ø8 ø5 M7x0.5 ø 10.2 Part number P5 S 6.3 2.5 Panel cut-out (page 38) FAN Straight plug, non-latching, nut fixing with earthing tags 15.6 13 S9 FAA.00.250.NTA Weight (g) ø5 2 maxi ø8 Part number M7x0.5 ø 10.2 9 FAN.00.250.CLA P5 S 6.3 Weight (g) 2.5 Panel cut-out (page 38) FPA Straight plug, non-latching, for printed circuit 7 5.08 14 ø1 Part number ø5 ø 0.7 (4x) 17 FPA.00.250.NTD Weight (g) 2.5 P11 PCB drilling pattern (page 38) FPL Elbow plug (90°), non-latching for printed circuit 7 ø5 5.08 Part number Weight (g) 17.5 P10 PCB drilling pattern (page 38) ø 0.7 12 2.5 7 10 FPL.00.250.NTD (5x) www.lemo.com ® ® ERA Fixed socket, nut fixing 15 1 S9 ø8 ø 10.2 M7x0.5 Part number 5.5 maxi ERA.00.250.NTL S 6.3 P5 Weight (g) 2.5 Panel cut-out (page 38) ERN Fixed socket, nut fixing, with earthing tags 15 S9 1 ø8 ø 10.2 M7x0.5 Part number 5.5 maxi ERN.00.250.NTL S 6.3 P5 Weight (g) 2.5 Panel cut-out (page 38) ERC Fixed socket, with thread, with slots in flange 1 1.6 Part number ø8 ø 10.2 M7x0.5 15 S9 ERC.00.250.NTL Weight (g) 2.6 P1 Panel cut-out (page 38) P3 Panel cut-out for use wihout hexagonal nut (page 38) 5.5 maxi ERE Fixed socket, nut fixing, with conical lead-in 15 1 S9 ø8 ø 10.2 M7x0.5 Part number 5.5 maxi S 6.3 ERE.00.250.NTL P5 Weight (g) 2.8 Panel cut-out (page 38) 15 1 Part number ø8 6.98 ±0.03 ERT Straight socket without thread, force or adhesive fit, with earthing tags ERT.00.250.NTL P4 www.lemo.com Weight (g) 2.1 Panel cut-out (page 38) 13 ® ® ERM Fixed socket, nut fixing, with microswitch 20 1 S9 ø8 ø 10.2 M7x0.5 Part number ERM.00.250.NTL Weight (g) 3.0 A 5.5 maxi S 6.3 P5 Panel cut-out (page 38) Technical characteristics on request B ERX Fixed socket, with thread, with slots in flange, with earthing tags 15 1.6 1 ø8 Part number ERX.00.250.NTL Weight (g) 2.0 P3 Panel cut-out (page 38) ECP Fixed socket with two nuts 15 2 ø9 ø9 M7x0.5 Part number ECP.00.250.NTL Weight (g) 3.3 P1 Panel cut-out (page 38) 4 maxi EHP Fixed socket, nut fixing, protruding shell S9 15 13.5 8.5 2 maxi ø8 ø 6.4 M7x0.5 ø 10.2 Part number EHP.00.250.NTL P5 S 6.3 ELF 15 10.5 S 6.3 14 2.8 Panel cut-out (page 38) Fixed socket, with slotted nut, long threaded shell, with earthing tags (back panel mounting) 2.5 1.5 mini 7.0 maxi Part number ø 10 M7x0.5 S 7.5 Weight (g) ELF.00.250.NTL P5 Weight (g) 3.1 Panel cut-out (page 38) www.lemo.com ® ® EPA-EPB Straight socket for printed circuit 7 ø 0.7 (5X) 17 5.08 L ø 6.8 Part number EPA.00.250.NTN EPB.00.250.NTN L (mm) Weight (g) 14 12 3.4 3.3 P10 PCB drilling pattern (page 38) EPC Straight socket for printed circuit with clearance under the body 7 ø 0.7 (5x) 17 5.08 14 ø 6.8 Part number EPC.00.250.NTN Weight (g) 3.3 P10 PCB drilling pattern (page 38) EPE Fixed socket with two nuts, for printed circuit 17 14 2.5 ø 10.2 ø 0.7 (5x) S9 7 3.5 maxi ø 10 M7x0.5 Part number EPE.00.250.NTN P1 5.08 Weight (g) 4.3 Panel cut-out (page 38) P12 PCB drilling pattern (page 38) EPL Elbow socket (90°) for printed circuit 7 ø 6.8 5.08 Part number EPL.00.250.NTN 7 10 17.5 H (mm) Weight (g) 10 4.3 P10 PCB drilling pattern (page 38) ø 0.7 (5x) EPM Elbow socket (90°) for printed circuit, elevated solder tail 7 ø 6.8 5.08 Part number 17.5 13 4.6 P10 PCB drilling pattern (page 38) ø 0.7 www.lemo.com Weight (g) 7 10 13 EPM.00.250.NTN H (mm) (5x) 15 ® ® EPK Elbow socket (90°) for printed circuit with clearance under the body 7 ø 6.8 5.08 Part number 17.5 4.2 10 7 EPK.00.250.NTN Weight (g) P10 PCB drilling pattern (page 38) ø 0.7 (5x) EPS Elbow socket (90°) with two nuts, for printed circuit 7 M7x0.5 ø 10.2 2.5 5.08 Part number Weight (g) S9 EPS.00.250.NTN 5.4 17.5 10 7 ø 10 P1 ø 0.7 (5x) P12 PCB drilling pattern (page 38) 4 maxi EPR Elbow socket (90°) with two nuts for printed circuit, with clearance under the body (back panel mounting) 7 ø 10.2 M7x0.5 5.08 Part number 2.5 S9 EPR.00.250.NTN 7 ø 10 17.5 10 Panel cut-out (page 38) P1 Weight (g) 5.4 Panel cut-out (page 38) P12 PCB drilling pattern (page 38) ø 0.7 (5x) 4 maxi EPY Elbow socket (90°) for printed circuit, with two vertical sockets 5.08 ø 6.8 2.42 Part number 21.5 10.5 17.8 14.3 EPY.00.250.NTN 12.8 P13 PCB drilling pattern (page 38) 3.9 7.5 8 Weight (g) ø 0.7 16 (6x) www.lemo.com ® ® EPN Straight socket for press mounting in pair on printed circuit Part number EPN.00.250.NTN 0.8 Weight (g) 3.6 5.08 ø 1.5 P9 PCB drilling pattern (page 38) 14 7 10.7 8.7 maxi 8.3 mini ø6 3.5 1.7 maxi 1.3 mini ø 0.9 (2x) 2 PCA Free socket with cable collet ø 6.5 ~25 Part number Cable group Cond. Ø max Dielectric Ø maxi PCA.00.250.NTLC15 PCA.00.250.NTLC22 PCA.00.250.NTLC27 PCA.00.250.NTLC31 9 1 2-3-4 8 0.55 0.55 0.55 0.55 1.45 1.95 1.95 1.95 M1 Sheath Ø mini maxi 1.1 1.7 2.3 2.8 1.4 2.1 2.7 3.1 Cable assembly (page 39) S 4.5 PCS Free socket for cable crimping ø 6.5 L S 5.5 Part number Dim L Cable group PCS.00.250.NTME24 PCS.00.250.NTME30 PCS.00.250.NTME31 PCS.00.250.NTME44 PCS.00.250.NTME52 30 30 30 30 33 1 2 3-4 5 6 M4 S 5.5 Cond. Ø Dielec. Sheath mini maxi Ø maxi Ø maxi 0.28 0.4 0.28 0.4 0.46 0.55 0.28 0.4 0.90 0.97 0.95 1.65 1.65 2.65 3.05 2.35 3.0 3.0 4.35 5.2 Cable assembly, crimp contact (page 40) PSA Fixed socket, nut fixing, with cable collet ~25 Part number S 4.5 www.lemo.com M7x0.5 ø8 1 5.5 maxi S 6.3 ø 10.2 S9 PSA.00.250.NTLC22 PSA.00.250.NTLC27 PSA.00.250.NTLC31 Cable group Cond. Ø max Dielectric Ø maxi 1 2-3-4 8 0.55 0.55 0.55 1.95 1.95 1.95 M1 Cable assembly (page 39) P5 Panel cut-out (page 38) Sheath Ø mini maxi 1.7 2.3 2.8 2.1 2.7 3.1 17 ® ® PSS Fixed socket, nut fixing, for cable crimping Part number Dim L Cable group PSS.00.250.NTME24 PSS.00.250.NTME30 PSS.00.250.NTME31 PSS.00.250.NTME35 PSS.00.250.NTME52 30 30 30 30 33 1 2 3-4 8 6 L ø8 M7x0.5 S 5.5 5.5 maxi ø 10.2 1 S9 Cond. Ø Dielec. Sheath mini maxi Ø maxi Ø maxi 0.28 0.4 0.28 0.4 0.46 0.55 0.46 0.55 0.90 0.97 0.95 1.65 1.65 1.65 3.05 2.35 3.0 3.0 3.35 5.2 S 6.3 M4 Cable assembly, crimp contact (page 40) P5 Panel cut-out (page 38) PES Fixed socket, nut fixing, for cable crimping (back panel mounting) 30 2.5 S 5.5 ø 10 M7x0.5 S 6.3 2.5 maxi Part number Cable group PES.00.250.NTME24 PES.00.250.NTME30 PES.00.250.NTME31 PES.00.250.NTME35 1 2 3-4 8 Cond. Ø Dielectric Ø Sheath Ø mini maxi maxi maxi 0.28 0.4 0.28 0.4 0.46 0.55 0.46 0.55 M4 Cable assembly, crimp contact (page 40) P5 Panel cut-out (page 38) 0.95 1.65 1.65 1.65 2.35 3.0 3.0 3.35 PFS Fixed socket, with two nuts, for cable crimping (back panel mounting) L S9 S 5.5 M7x0.5 ø 10.2 ø 10 2.5 Part number Dim L Cable group PFS.00.250.NTME24 PFS.00.250.NTME31 PFS.00.250.NTME52 30 30 33 1 3-4 6 Cond. Ø Dielec. Sheath mini maxi Ø maxi Ø maxi 0.28 0.4 0.46 0.55 0.90 0.95 0.95 1.65 3.05 2.35 3.0 5.2 S 6.3 P5 5.5 maxi Panel cut-out (page 38) Cable assembly, please contact customer services PLK Fixed elbow socket (90°), for cable crimping (back panel mounting) 18.5 2.5 2.5 maxi S6 Part number ø 10 15.5 M7x0.5 S 6.3 PLK.00.250.NTLE31 PLK.00.250.NTLE35 P5 Cable group 3-4 8 Cond. Ø Dielectric Ø Sheath Ø mini maxi maxi maxi 0.46 0.55 0.46 0.55 1.65 1.65 3.0 3.35 Panel cut-out (page 38) Cable assembly, please contact customer services 18 www.lemo.com ® ® FRT Straight plug with resistor 29 21 ø 6.4 Part number FRT.00.250.NTA00 FRT.00.250.NTA50 FRT.00.250.NTA100 Resistor Weight (g) shorted 50 Ω 0.6W 100 Ω 0.4W 4.4 4.4 4.4 Note S 5.5 Note: Standard, first choice alternative Non standard, on request only FLR Elbow plug (90°) with resistor 17.5 ø9 9.5 18.8 Part number FLR.00.250.NTA50 Resistor Weight (g) 50 Ω 0.6 W 5.6 RAD Fixed coupler, nut fixing 22 S9 1 M7x0.5 ø 10.2 ø8 Part number RAD.00.250.NTM P5 5.5 maxi S 6.3 Weight (g) 3.8 Panel cut-out (page 38) Note: the first contact type mentioned (page 7) is always the contact at the flange end. RMA Free coupler ø 6.4 22 Part number RMA.00.250.NTM Weight (g) 2.7 FTR Elbow plug (90°) with socket 18.5 17.5 9.5 9 Part number FTR.00.250.NTA www.lemo.com Weight (g) 5.4 19 ® ® FTA T-plug with two sockets in line Part number 30 FTA.00.250.NTF 7.8 17.5 9.5 ø9 Weight (g) FTL T-plug with two sockets (90°) Part number 28 ø9 FTL.00.250.NTF Weight (g) 7.1 18.5 20 FTY Straight plug with two parallel sockets Part number 29.5 20 21.5 FTY.00.250.NTF 12.5 ø 16 7 7 Weight (g) www.lemo.com ® ® Plastic housing models This plastic housing provides the ideal solution when the isolation of the connector is critical (non metallic). The FFA and ERN models in PEEK allow weight saving and can provide ease of use in applications such as medical electronic instrumentation. Technical Characteristics Mechanical and climatical Characteristics Value Standard Test Contact retention force Cable pull off force Connector pull off force > 18 N > 100 N > 90 N IEC 60512-8 IEC 60512-9 15a 17a Endurance > 5000 cycles IEC 60512-5 9a - 50°C + 250°C Operating temperature FFA Straight plug with cable collet, PEEK outer shell Part number FFA.00.250.GTAC15 FFA.00.250.GTAC17 FFA.00.250.GTAC22 FFA.00.250.GTAC27 .FFA.00.250.GTAC31 ~33.5 ø7 ~25.5 M1 S6 1 Part number ø9 M7x0.5 ø 10.2 0.55 0.55 0.55 0.55 0.55 1.45 1.45 1.95 1.95 1.95 1.1 1.3 1.7 2.3 2.8 1.4 1.7 2.1 2.7 3.1 Cable assembly (page 39) ERN.00.250.GTL 5.5 maxi 9 – 1 2-3-4 8 ERN Fixed socket, nut fixing, with earthing tags, PEEK outer shell 15 S9 Cable Cond. Dielectric Ø Sheath Ø group Ø max maxi mini maxi S 6.3 Weight (g) 1.4 P5 Panel cut-out (page 38) PCA Free socket with cable collet, PEEK outer shell Part number ø7 ~32.5 S6 www.lemo.com PCA.00.250.GTLC15 PCA.00.250.GTLC17 PCA.00.250.GTLC22 PCA.00.250.GTLC27 PCA.00.250.GTLC31 M1 Cable Cond. Dielectric Ø Sheath Ø group Ø max maxi mini maxi 9 – 1 2-3-4 8 0.55 0.55 0.55 0.55 0.55 1.45 1.45 1.95 1.95 1.95 1.1 1.3 1.7 2.3 2.8 1.4 1.7 2.1 2.7 3.1 Cable assembly (page 39) 21 ® ® Watertight or vacuumtight models A range of sealed sockets and couplers allows the device on which they are fitted to reach a protection index of IP68 as per IEC 60529 (unmated). They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc. These models are identified by a letter «P» at the end of the reference for watertight model and by a «PV» for vacuumtight models. Epoxy resin or o-rings are used to seal these models. Mechanical and climatical Characteristics Endurance Humidity Temperature range Salt spray corrosion test Climatical category Leakage rate (He)1) Maximum operating pressure2) Value Standard > 5000 cycles IEC 60512-5 test 9a up to 95% at 60° C - 20° C/+100° C > 144h IEC 60512-6 test 11f 20/80/21 IEC 60068-1 < 10-7 mbar.l.s -1 IEC 60512-7 test 14b 60 bars IEC 60512-7 test 14d HGP Fixed socket, nut fixing, watertight or vacuumtight 17 1.5 S9 Part number ø 11 M7x0.5 ø 10.2 Note: 1) only for vacuumtight models. 2) this value corresponds to the maximum allowed pressure difference for the assembled socket. HGP.00.250.NTLP HGP.00.250.NTLPV Weight (g) 4.2 4.2 8 maxi P1 HGW Fixed socket, nut fixing, watertight with rear sealing ring 15 1 Part number ø8 M7x0.5 ø 13 S9 Panel cut-out (page 38) HGW.00.250.NTLP P1 3.8 mini 5.8 maxi Weight (g) 4.2 Panel cut-out (page 38) Note: Non standard, on request only HEP Fixed socket, nut fixing, watertight for printed circuit (back panel mounting) 18 3 4.7 S9 2 maxi S 6.3 5.08 Part number ø 0.7 ø11 ø8.7 M7x0.5 2.5 HEP.00.250.NTNP 0.9 (4 x) P5 Weight (g) 7.4 Panel cut-out (page 38) P15 PCB drilling pattern (page 38) 22 www.lemo.com ® ® EWF Fixed socket, nut fixing, watertight or vacuumtight (back panel mounting) 17 3 Part number ø 10.2 ø 11 M7x0.5 S9 EWF.00.250.NTLP EWF.00.250.NTLPV 9.5 maxi S9 P1 Weight (g) 4.2 4.2 Panel cut-out (page 38) EWV Fixed socket, watertight or vacuumtight 17 ø 1.5 2.6 ø 11 EWV.00.250.NTLP EWV.00.250.NTLPV ø 7.9 M7x0.5 Part number P2 Weight (g) 3.7 3.7 Panel cut-out (page 38) SWH Fixed coupler, nut fixing, vacuumtight 24.5 1.5 S9 M7x0.5 ø 11 ø 10.2 Part number SWH.00.250.NTMV P1 5.5 maxi Weight (g) 5.2 Panel cut-out (page 38) Note: this model is sealed with o-rings (no epoxy). VPS Fixed socket, short shell, vacuumtight with cable crimping (back panel mounting) ø 10 ø7 ø 11 M7x 0.5 24.5 1.5 max Part number VPS.00.250.CTLE31 Cable group 3-4 Cond. Ø Dielectric Ø Sheath Ø maxi maxi mini maxi 0.46 0.55 1.65 3.0 S5 16.5 P1 Panel cut-out (page 38) Cable assembly, please contact customer service www.lemo.com 23 ® ® Metal housing models with mechanical keying The straight plug and receptacle models FSG,XBG,XRG,XSG,ESG,EXG and PSG are available with a key to avoid cross mating of similar connectors. These models are not included in the NIM-CAMAC standard. The standard "G" key consists of one mechanical alignment key. Front view of the standard "G" key FSG Straight plug with key (G), with cable crimping Part number FSG.00.250.NTAE24 FSG.00.250.NTAE31 FSG.00.250.NTAE52 M5 L L 31 31 34 ø 6.4 Part number FSG.00.250.NTCE24 FSG.00.250.NTCE31 FSG.00.250.NTCE52 S 5.5 M4 2.5 0.4 0.55 0.97 0.95 1.65 3.05 2.35 3.0 5.2 L Dim M 31 31 34 23 23 26 Cable Cond. Ø Dielec. Sheath group mini maxi Ø maxi Ø maxi 1 3-4 6 0.28 0.4 0.46 0.55 0.90 0.97 0.95 1.65 3.05 2.35 3.0 5.2 Cable assembly, crimp contact (page 40) M7x0.5 Part number 17.5 XBG.00.250.NTN 9 P1 ø 10 7 1 3-4 6 Cond. Dielec. Sheath Ø maxi Ø maxi Ø maxi XBG Elbow socket (90°) with slotted nut, for printed circuit with key (G) 7 5.08 23 23 26 Cable group Cable assembly, solder contact (page 41) M S 5.5 Dim M Weight (g) 5.1 Panel cut-out (page 38) 3 P12 PCB drilling pattern (page 38) ø 0.7 (5 x) 5 maxi XRG Elbow socket (90°), with key (G), short shell and slotted nut, for printed circuit, screw fixing (back panel mounting) 14 7 2 x M 1.4 4 maxi Part number ø 10 M7x0.5 3 7 2.5 XRG.00.250.NTN P1 Weight (g) 3.8 Panel cut-out (page 38) P14 PCB drilling pattern (page 38) 24 www.lemo.com ® ® XSG Elbow socket (90°) with slotted with key (G), and hex nuts for printed circuit S9 7 2.5 ø 10.3 M7x0.5 5.08 Part number XSG.00.250.NTN 17.5 7 ø 10 P1 Weight (g) 5.4 Panel cut-out (page 38) 3 P12 PCB drilling pattern (page 38) ø 0.7 (5 x) 4 maxi ESG Fixed socket with two round nuts, threaded shell, with key (G) (back panel mounting) 15 Part number ø9 ø9 M7x0.5 2 ESG.00.250.NLL Weight (g) 3.1 4 maxi P1 EXG Elbow socket (90°) with slotted nut for printed circuit, with key (G), with o-ring on flange (back panel mounting). Special shell design. 2.5 7 Panel cut-out (page 38) ø10 M7x0.5 5.08 Part number 11 9 ø 10 17.5 EXG.00.250.NTNY P1 6.3 Panel cut-out (page 38) 5 maxi ø 0.7 ø 1.2 Weight (g) P15 PCB drilling pattern (page 38) (4x) PSG Fixed socket, nut fixing, with key (G) with cable crimping L www.lemo.com M7x0.5 S 5.5 5.5 maxi ø 10.2 1 ø8 S9 Part number Dim L Cable group PSG.00.250.NTME24 PSG.00.250.NTME31 PSG.00.250.NTME52 30 30 33 1 3-4 6 Cond. Ø Dielec. Sheath mini maxi Ø maxi Ø maxi 0.28 0.4 0.46 0.55 0.90 0.97 0.95 1.65 3.05 2.35 3.0 5.2 S 6.3 M4 Cable assembly, crimp contact (page 40) P5 Panel cut-out (page 38) 25 ® ® Threaded-coupling models The straight plug and receptacle models FVS, EPE and EPS are available with threaded coupling. On sockets, 3.2 mm minimum length of free threading must be available to ensure screw mating. These models are not included in the NIM-CAMAC standard. FVS Straight plug for cable crimping Part number FVS.00.250.NTAE24 FVS.00.250.NTAE31 FVS.00.250.NTAE52 M5 M FVS.00.250.NTCE24 FVS.00.250.NTCE25 FVS.00.250.NTCE30 FVS.00.250.NTCE31 FVS.00.250.NTCE35 FVS.00.250.NTCE44 FVS.00.250.NTCE52 FVS.00.250.NTCE56 ø9 S5 S5 M4 31 31 34 Cable group Cond. Ø maxi Dielec. Ø maxi Sheath Ø maxi 1 3-4 6 0.4 0.55 0.97 0.95 1.65 3.05 2.35 3.0 5.2 23 23 26 Cable assembly, solder contact (page 41) Part number L Dim L M L Dim M 31 31 31 31 31 31 34 34 23 23 23 23 23 23 26 26 Cable Cond. Ø Dielec. Sheath group mini maxi Ø maxi Ø maxi 1 1 2 3-4 8 5 6 7 0.28 0.28 0.28 0.46 0.46 0.28 0.90 0.90 0.4 0.4 0.4 0.55 0.55 0.4 0.97 0.97 0.95 1.15 1.65 1.65 1.65 2.65 3.05 3.05 2.35 2.35 3.0 3.0 3.35 4.35 5.2 5.45 Cable assembly, crimp contact (page 40) EPE Straight socket with two nuts, for printed circuit 17 14 3.2 mini ø 0.7 (5x) S9 0.7 maxi 7 Part number ø 10 ø10.2 M7x0.5 2.5 EPE.00.250.NTN 5.08 P1 Weight (g) 4.3 Panel cut-out (page 38) P12 PCB drilling pattern (page 38) 7 M7x0.5 3.2 mini EPS Elbow socket (90°) with two nuts, for printed circuit ø 10.2 2.5 5.08 Part number S9 EPS.00.250.NTN Weight (g) 5.4 17.5 ø 0.7 (5 x) 26 ø 10 7 10 P1 Panel cut-out (page 38) P12 PCB drilling pattern (page 38) 0.7 maxi www.lemo.com ® ® Adaptors ABF Adaptor from LEMO plug to BNC socket 36 Part number 28 8.3 ø 11.5 ABF.00.250.NTA Weight (g) Part number 35.5 APF.00.250.DTAB APF.00.250.DTAR ø 6.4 ø 8.3 ø 4.6 APF Adaptor from LEMO plug to CINCH socket Colour of the ring Weight (g) white red 7 7 43.5 ABA Adaptor from LEMO socket to BNC plug ø 14.5 28.5 Part number ABA.00.250.NTL Weight (g) 18.7 ABC Adaptor from LEMO socket to BNC socket ø 14.5 29.5 Part number S 16 S 17 Part number ABD.00.250.NTM P7 S 11.7 www.lemo.com 17 ABD Adaptor from LEMO socket to BNC fixed socket 29.5 ø 19.5 1/2-28 UNEF - 2A ABC.00.250.NTM Weight (g) Weight (g) 21.4 Panel cut-out (page 38) 5 maxi 27 ® ABB Adaptor from LEMO fixed socket to BNC socket 3/8-32 UNEF - 2A ® 25 Part number ø 14 S 11 ABB.00.250.NTM P6 Weight (g) 9.4 Panel cut-out (page 38) 9.5 maxi S 8.7 ACA Adaptor from LEMO socket to C plug 31 ø 19.5 Part number ACA.00.250.NTL Weight (g) 32 Note: Non standard, on request only AGH Adaptor from LEMO socket to UHF plug ø 18.5 26 Part number AGH.00.250.NTL Weight (g) 13.8 ANA Adaptor from LEMO socket to N plug 33.5 ø 20.5 Part number ANA.00.250.NTL Weight (g) 38 ANB Adaptor from LEMO socket to N socket ø 17.5 45.5 Part number ANB.00.250.NTM Weight (g) 61.7 5/8 - 24 UNEF - 2A Note: Non standard, on request only 28 www.lemo.com 5/8 - 24 UNEF - 2A ® 46 ® ANC Adaptor from LEMO socket to N fixed socket S 19 ø 21.8 Part number ANC.00.250.NTM P8 S 13.5 Weight (g) 63.5 Panel cut-out (page 38) 17 maxi Note: Non standard, on request only ASA Adaptor from LEMO socket to SMA plug 30 ø9 Part number ASA.00.250.NTL Weight (g) 4.9 S8 1 / 4 - 36 UNS - 2A ASB Adaptor from LEMO socket to SMA socket 30.8 ø9 Part number ASB.00.250.NTM Weight (g) 4.6 S8 1 / 4 - 36 UNS - 2A ASF Adaptor from LEMO plug to SMA socket 31.8 23.8 ø9 Part number ASF.00.250.NTA Weight (g) 4.6 S8 ASG Adaptor from LEMO plug to SMA plug 31 ø9 23 Part number ASG.00.250.NTC Weight (g) 4.9 S8 www.lemo.com 29 ® ® Variant Bend relief for models with collet (letter Z in the variant position) Need to be ordered Reference Need to be ordered separately (see page 33) C15Z C17Z C22Z C27Z C31Z C52Z K37Z K42Z D42Z D52Z GMA.00.0●●.D● GMA.00.0●●.D● – GMD or GMB.00.0●●.D● GMD or GMB.00.0●●.D● GMA.0B.0●●.D● GMA.0B.0●●.D● GMA.0B.0●●.D● GMA.0B.0●●.D● GMA.0B.0●●.D● Note: The “GMD” are thin bend reliefs (for very flexible cables) Bend relief for models for cable crimping (no letter in the variant position) The bend relief can be fitted directly over the crimp ferrule Need to be ordered 30 Reference Need to be ordered separately (see page 33) E24 E25 E30 E31 E32 E35 E44 E52 E56 GMD or GMB.00.0●●.D● GMD or GMB.00.0●●.D● GMD or GMB.00.0●●.D● GMD or GMB.00.0●●.D● GMD or GMB.00.0●●.D● – – – – Note: The “GMD” are thin bend reliefs (for very flexible cables) www.lemo.com ® ® Assembled cables MFB models MSB models Delay lines Part number MFB.00.250.RTE005 MFB.00.250.RTE010 MFB.00.250.RTE020 MFB.00.250.RTE030 MFB.00.250.RTE040 MFB.00.250.RTE050 MFB.00.250.RTE060 MFB.00.250.RTE080 MFB.00.250.RTE100 MFB.00.250.RTE160 MFB.00.250.RTE200 MFB.00.250.RTE320 MFB.00.250.RTE640 Assembled Cables Delay (ns) 0.5 1.0 2.0 3.0 4.0 5.0 6.0 8.0 10.0 16.0 20.0 32.0 64.0 Part number MSB.00.250.RTE005 MSB.00.250.RTE010 MSB.00.250.RTE020 MSB.00.250.RTE030 MSB.00.250.RTE040 MSB.00.250.RTE050 MSB.00.250.RTE060 MSB.00.250.RTE080 MSB.00.250.RTE100 MSB.00.250.RTE160 MSB.00.250.RTE200 MSB.00.250.RTE320 MSB.00.250.RTE640 Length (cm) Part number MFB.00.250.LTE010 MFB.00.250.LTE020 MFB.00.250.LTE030 MFB.00.250.LTE040 MFB.00.250.LTE050 MFB.00.250.LTE060 MFB.00.250.LTE080 FRT MFB.00.250.LTE100 MFB.00.250.LTE150 MFB.00.250.LTE200 MFB.00.250.LTE300 MFB.00.250.LTE400 MFB.00.250.LTE500 10 20 30 40 50 60 80 100 150 200 300 400 500 Part number MSB.00.250.LTE010 MSB.00.250.LTE020 MSB.00.250.LTE030 MSB.00.250.LTE040 MSB.00.250.LTE050 MSB.00.250.LTE060 MSB.00.250.LTE080 MSB.00.250.LTE100 MSB.00.250.LTE150 MSB.00.250.LTE200 MSB.00.250.LTE300 MSB.00.250.LTE400 MSB.00.250.LTE500 Note: the standard cable used to manufacture these cable assemblies is according to IEC.50.2.1 standard. On request this type of cable can be replaced by other coaxial cables. Other cable lengths are available on request. Accessories Fitting of the cord Slide the plug into the loop of the cord. Place the loop into the groove in front of the collet nut and tighten the loop. BFG Caps for plug with or without keying Part number BFG.00.100.PCSG Weight (g) 0.7 9.8 ø 7.5 10 60 www.lemo.com Note: upon request this cap can be supplied in black and the last letter “G” of the part number should be replaced with “N”. ● ● ● ● ● Body material: Polyoxymethylen (POM) grey Cord material: Polyamid 6, grey O-ring material: Silicone rubber Maximum operating temperature: 100°C Watertightness: IP61 according to IEC 60529 31 ® ® BRA Blanking cap for fixed socket and free straight socket 9 3.5 9.8 ø 7.5 Part number ø 3.5 60 BRA.00.200.PCSG Weight (g) 0.6 Note: upon request this cap can be supplied in black and the last letter “G” of the part number should be replaced with “N”. ● O-ring material: Silicone rubber ● Maximum operating temperature: 100°C ● Watertightness: IP61 according to IEC 60529 ● Body material: Polyoxymethylen (POM) grey ● Cord material: Polyamid 6, grey Fitting of the cord Slide the socket into the loop of the cord. Place the loop into the groove in front of the collet nut and tighten the loop. BRD Blanking cap for free socket Part number BRD.00.200.PCSG 9 Weight (g) 0.5 Note: upon request this cap can be supplied in black and the last letter “G” of the part number should be replaced with “N”. 9.8 ø 7.5 3.5 ● ● ● ● ● 60 Body material: Polyoxymethylen (POM) grey Cord material: Polyamid 6, grey O-ring material: Silicone rubber Maximum operating temperature: 100°C Watertightness: IP61 according to IEC 60529 BRE Blanking cap for fixed socket, free socket and coupler 8.8 7.5 3.5 Part number 6.5 ø 3.5 60 ø8 BRE.00.200.NAS Weight (g) ● ● ● ● ● Body material: Brass (UNS C 38500), nickel-plated (3 µm) Cable material: Stainless steel O-ring material: Silicone rubber or FPM Maximum operating temperature: 250°C Watertightness: IP61 according to IEC 60529 GCD Earthing cap ø8 øC L S7 Part number GCD.00.020.LA GCD.00.032.LA GCD.00.050.LA Cable group Dim. L C 1 2-3-4 6 12 2.0 16 3.2 19 5.0 Note: the shield braid of the cable should be soldered onto the back of the cap screwed on the socket outer shell. ● Material: Brass (UNS C 38500) gold-plated (0.5 µm) 32 www.lemo.com ® ® GM• Bend relief (Polyurethane) A Dim. L ø Cable max min Nut for fitting the bend relief part nb GMA.00.012.D • GMA.00.018.D• GMB.00.025.D• GMB.00.028.D• GMB.00.032.D• GMD.00.025.D• GMD.00.028.D• GMD.00.032.D• 1.2 1.8 2.5 2.8 3.2 2.5 2.8 3.2 22 22 22 22 22 22 22 22 1.4 2.1 2.8 3.1 3.5 2.8 3.1 3.5 1.1 1.8 2.5 2.8 3.2 2.5 2.8 3.2 FFM.00.130.LN FFM.00.130.LN FFM.00.130.LN FFM.00.130.LN FFM.00.130.LN FFM.00.130.LN FFM.00.130.LN FFM.00.130.LN GMA.0B.025.D • GMA.0B.030.D• GMB.0B.035.D• GMB.0B.040.D• GMB.0B.045.D• 2.5 3.0 3.5 4.0 4.5 24 24 24 24 24 2.9 3.4 3.9 4.4 5.2 2.5 3.0 3.5 4.0 4.5 FFM.0B.130.LC FFM.0B.130.LC FFM.0B.130.LC FFM.0B.130.LC FFM.0B.130.LC øA Part number L Note: a) for use with crimp models and nut for fitting a bend relief. b) the last letter of the part number “•” specifies the colour. Refer to the table below, for GRA washers, to define another colour and replace the letter “•” by the one corresponding to the colour required. c) material: Polyurethan (Desmopan 786) d) operating temperature: -40°C + 80°C GRA Insulating washers Weight (g) Part number GRA.00.269.G• 1.8 ø10 1 ø 8.8 6.4 3.5 maxi Note: a) sockets and plugs mounted on panels can be fitted with insulating washers. The nine colours available combined with those for the bend reliefs makes colour coding possible. b) the last letter of the part number “•” specifies the colour. Refer to the table below to define another colour and replace the letter “•” by the one corresponding to the colour required. c) material: Polyamid d) operating temperature: -40°C + 80°C Ref. 8 0.1 Colour A B G blue white grey Ref. J M N Colour Ref. yellow brown black R S V Colour red orange green Spare Parts FFS Crimp ferrule L øB øA Part number FFS.00.160.DN FFS.00.161.MN FFS.00.162.DN FFS.00.163.DN FFS.00.164.DN CRK.0A.160.DN Cable group øA Dim. øB L 1 2-3-4 8 5 6 7 3.1 3.8 4.4 5.3 6.2 6.2 2.4 3.05 3.4 4.4 5.25 5.5 8 8 8 8 11 11 Note: sockets and plugs to be crimped are always supplied with a crimp ferrule. To order this accessory separately, use the above part numbers. ● Material: Copper (UNS C 18700) nickel-plated (3µm) www.lemo.com 33 ® ® GBB Tapered washer ø9 2 ø 7.1 Weight (g) Part number GBB.00.250.LN 0.2 Note: to order this accessory separately, use the above part number. ● Material: Brass (UNS C 38500) nickel-plated (3 µm) GBA Locking washer ø9.5 1 ø7.1 Weight (g) Part number GBA.00.250.FN 0.2 Note: sockets and plugs are always supplied with a locking washer. To order this accessory separately, use the above part number. GEA Hexagonal nut 9 2 M7 x 0.5 Weight (g) Part number ø 10.2 GEA.00.240.LN 0.6 Note: sockets and plugs are supplied with a hexagonal nut as standard. To order this accessory separately, use the above part number. The last letters “LN” of the part number refer to the nut material and treatment. If a nut in aluminium alloy is desired, replace the last letters of the part number by “PT”. ● Material: - Brass (UNS C 38500) nickel-plated (3 µm) - Aluminium alloy natural anodized GEB Round nut ø9 M7 x 0.5 4 Part number Weight (g) Standard for models 0.8 ECP, ESG GEB.00.240.LN Note: to order this accessory separately, use the above part number. ● Material: Brass (UNS C 38500) nickel-plated (3 µm) GEC Conical nut 8 M7 x 0.5 2.5 Weight (g) ø 10 Part number GEC.00.240.LN 0.6 Note: to order this accessory separately, use the above part number. ● Material: Brass (UNS C 38500) nickel-plated (3 µm) GEG Notched nut øA L øB e Part number GEG.00.240.LN A 8.7 Dimensions (mm) B e 10 M7 x 0.5 Standard for models L 2.5 EPE, EPS, EPR PES, PFS, PLK, VPS, HEP Note: to order this accessory separately, use the above part numbers. ● Material: Brass (UNS C 38500) nicked-plated (3 µm) 34 www.lemo.com ® ® GEB Slotted nut øA L e A Dimensions (mm) B e GEB.00.242.LN 8.5 10 M7 x 0.5 Standard for models L øB Part number 2.5 ELF, XBG, XRG, XSG, EXG Note: to order this accessory separately, use the above part numbers. ● Material: Brass (UNS C 38500) nicked-plated (3 µm) GCA Earthing Washer ø 9.5 0.4 ø 7.1 18.2 Part number GCA.00.255.LT Weight (g) 0.2 ● Material: Brass (UNS C 27400) treated CuSnZn (2 µm) Tooling DCG Spanner for hexagonal nut 40 50 Part number of the nut Part number DCG.91.149.0TN GEA.00.240.LN ● Material: Blackened steel ø 14 DCA Spanner for hexagonal nut with locator for flats on socket thread 65 maxi 50 DCA.91.149.0TN ø 14 Part number of the nut Part number GEA.00.240.LN ● Material: Blackened steel ø 10.1 DCH Spanner for notched nut ø 12.8 124 Part number DCH.91.101.PA Part number of the nut GEG.00.240.LN 48.3 ● Material: blue polyurethane www.lemo.com 35 ® ® DCB Spanner for slotted nut 60 Part number of the nut 19 Part number DCB.91.455.0LN GEB.00.242.LN ø 11 ● Material: Steel, nicked plated DCB Spanner for round nut 50 Part number of the nut 40 Part number DCB.91.119.0TN GEB.00.240.LN ø 11 ● Material: Blackened steel DCN Spanner for assembling plug with 3 latches 12 Part number 42 ø9 DCN.91.905.0TK ● Material: Blackened steel DCP Flat spanner for collet nut L Dimensions M N S1 M Part number DCP.99.045.TC DCP.99.050.TC DCP.99.055.TC DCP.99.060.TC N S1 S1 L 70 78 78 78 2 2 2 2 10.5 12.6 12.6 12.6 4.5 5.0 5.5 6.0 ● Material: Chrome-plated steel DCR Extraction tool for plugs Part number DCR.91.106.0PN ø 12 ø 10.3 120 ● Material: Black Polypropylene 9 36 Note: this type of tool has been produced in order to facilitate the mating and unmating of plugs and is particularly useful in high density applications. www.lemo.com ® ® DPE Crimping tool with die Part number DPE.99.000.0K DPE.99.123.1K DPE.99.123.8K DPE.99.124.3K DPE.99.125.2K DPE.99.176.2K Cable group Crimp collet ref. Crimping tool with no die 1 E24 2-3-4 E30, E31 8 E35 5 E44 6-7 E52, E56 DPN Dies Part number A A DPN.99.123.1K DPN.99.123.8K DPN.99.124.3K DPN.99.125.2K DPN.99.176.2K 1 2-3-4 8 5 6-7 Die dimension For contacts For shield A B L A B 1.29 1.29 1.29 1.29 1.71 0.91 0.91 0.91 0.91 1.21 2.0 2.0 2.0 2.0 2.5 3.10 3.80 4.36 5.20 6.20 2.70 3.30 3.78 4.50 5.37 B B L Cable group for contacts www.lemo.com for shield ● Dies material: Blackened steel 37 ® ® Panel cut-outs Panel cut-out P1 P2 P3 P4 P5 Cut-out P1 B + 0.1 0 L mini e P6 P7 øA P2 P3 P4 + 0.1 0 P8 P5 B + 0.1 0 L mini øA P6 P7 P8 Model ECP-EPE-EPR-EPS-ERC EWF-EXG-FAB-HGP HGW-SWH-VPS-XBG XSG-XRG EWV ERC-ERX ERT EHP-ELF-ERA-ERE-ERM ERN-FAA-FAN-PES-PFS PLK-PSA-PSG-PSS 1) ABB ABD ANC Dimensions B L A e 7.1 – 14.5 – – – 6.92 + 0.02 0 – – – 12.0 9.0 – M7x0.5 M7x0.5 – 7.1 6.4 14.5 – 9.7 12.9 16.1 9.0 11.7 13.7 15.0 20.5 24.0 – – – Note: 1) If these models are used with a tapered washer GBB, the panel cut-out must be according P1. + 0.1 0 Recommended mounting nut torque: 1 Nm. PCB drilling pattern P9 P10 P11 P12 P15 Drill B ø A + 00.1 = = B øC + 0.1 0 Model A Dimensions B C P9 EPN 1.0 5.08 – P10 EPA-EPB-EPC-EPL-EPK EPM-FPL 0.8 5.08 0.8 P11 P12 P15 FPA EPE-EPS-EPR-XSG HEP, EXG 0.8 0.8 1.3 5.08 5.08 5.08 1.1 0.8 0.8 P13 EPY 0.8 5.08 0.8 XRG 1.8 5.5 0.8 P14 P13 B ø A + 00.1 B = = øC + 0.1 0 P14 B ø A + 00.1 2.05 ø C + 00.1 38 www.lemo.com ® ® Cable assembly Terminating of plugs and straight sockets with cable collet 5 M1 M2 4 M3 3 1 Straight plug 2 5 Free socket 3 4 5 1 Fixed socket nut fixing 1. Cable preparation First place the bend relief (if to be used) on the cable. Strip the cable according to dimensions below. L ± 0.2 S ± 0.2 Cable group T M1 S L T M2 S L T M3 S L 1-2-3-4-8 6-7 4 – 4.5 – 9 – – 7.5 – 8.5 – 13 5 – 5 – 8 – T ± 0.2 2. Cable termination 2.1 Place the collet nut ➀ and the collet ➁ on the cable. Fold back the shield braid onto the conical part of the collet, and trim to the outer edge of the collet Crimp 2.2 Slide the subassembly ➂ to trap the shield braiding and solder the central conductor into the contact. Crimp 2.3 Slide the insulator ➃ onto the subassembly ➂ until it rests against the earthing sleeve of the subassembly ➂. 2.4 Slide the assembly into the connector outer shell ➄. Screw the collet nut ➀ into the connector outer shell ➄ using the appropriate tool and tighten to a torque of 0.25 Nm (see “Tooling” on page 35, 36 and 37). Push the bend relief (if used) onto the collet nut. Note: these terminating instructions apply to the following models: M1 = FFA, FFE, FFF, PCA, PSA M2 = FFY M3 = FFC www.lemo.com 39 ® ® Terminating of plugs and straight sockets with cable crimping (crimp contact) 4 M4 2 3 Straight plug 1 4 Free socket 3 2 4 Fixed socket nut fixing 1. Cable preparation First place the bend relief (if to be used) on the cable. Strip the cable according to dimensions below. L ± 0.2 S ± 0.2 Cable group T M4 S L 1-2-3-4-8 6-7 7 7 15 15 19.5 21.5 T ± 0.2 2. Cable termination 2.1 Place crimp ferrule ➀ on the cable. Widen the shield braid. Slide the subassembly ➁ into the cable until the insulator rests against the dielectric and the cable conductor is visible through the contact inspection hole. Crimp 2.2 Crimp the contact with the LEMO crimping tool using the square hole (see “Tooling” on page 37). Gently pull the cable in order to check the crimping. Crimp 2.3 Slide the crimp ferrule ➀ onto the shield until it rests against the crimp backnut of the subassembly ➁. Crimp with the same LEMO crimping tool using the hexagonal opening. Slide the insulator ➂ onto the subassembly ➁. 2.4 Slide the assembly into the connector shell ➃ and screw it onto the subassembly ➁. Tighten using the appropriate tool to a torque of 0.25 Nm (see “Tooling” on page 35, 36 and 37). Push the bend relief (if used) onto the crimp ferrule ➀. Note: these terminating instructions apply to the following models: M4 = FFS, FFV, PCS, PSS, PES 40 www.lemo.com ® ® Terminating of plugs and straight sockets with cable crimping (solder contact) 4 M5 2 3 Straight plug 1 4 Free socket 3 2 4 Fixed socket nut fixing 1. Cable preparation First place the bend relief (if to be used) on the cable. Strip the cable according to dimensions below. L ± 0.2 S ± 0.2 Cable group T M5 S L 1-2-3-4-8 6-7 5 5 12 12 17 19 T ± 0.2 2. Cable terminating 2.1 Place the crimp ferrule ➀ on the cable. Widen the shield braid. Slide the subassembly ➁ over the cable until the insulator rests against the dielectric and the cable conductor is visible through the contact solder hole. 2.2 Solder the conductor through the hole. Solder Solder 2.3 Slide the crimp ferrule ➀ onto the shield until it rests against the crimp backnut of the subassembly ➁. Crimp with the LEMO crimping tool using the hexagonal opening (see “Tooling” on page 37). Slide the insulator ➂ onto the subassembly ➁. 2.4 Slide the assembly into the connector shell ➃ and screw it onto the subassembly ➁. Tighten using the appropriate tool to a torque of 0.25 Nm (see tooling on pages 35, 36 and 37). Push the bend relief (if used) onto the crimp ferrule. Note: these terminating instructions apply to the following models: M5 = FFS, FFV www.lemo.com 41 ® ® Terminating of elbow plugs (90°) with cable collet (solder contact) 3 M6 and cable crimp (solder contact) M7 5 4 2 3 4 2 1 1 1. Cable preparation 1. First place the bend relief (if to be used) on the cable. Strip the cable according to dimensions below. L ± 0.2 S ± 0.2 2. Solder 42 Cable group T M6 S L 1-2-3-4-8 1 3.5 6.5 First place the bend relief (if to be used) on the cable. Strip the cable according to dimensions below. L ± 0.2 S ± 0.2 T ± 0.2 T ± 0.2 Cable terminating Cable preparation 2. Cable group T M7 S L 1-2-3-4-8 6-7 1 3 4.5 4.5 9 11 Cable terminating 2.1 Place the crimp ferrule ➀ and collet ➁ on the cable. Fold back the shield braid onto the conical part of the collet, and trim to outer edge of the collet. 2.1 Place the cable crimp ferrule ➀ on the cable and widen the braiding. 2.2 Slide the assembly into the connector shell ➂ and tighten the collet nut ➀ using the appropriate tool to a torque of 0.25 Nm (see “Tooling” on page 35, 36 and 37). Check that the cable conductor rests in the contact slot, solder the conductor through the hole. 2.2 Slide the cable into the connector shell ➁. Check that cable conductor rests in the contact slot, tin solder the conductor through the hole. Slide the crimp ferrule ➀ over the braiding until it reaches the connector shell ➁. Crimp with the LEMO crimp tool using the hexagonal opening (see “Tooling” on page 37). Solder 2.3 Place the insulating sleeve ➃ over the soldered contact. 2.3 Place the insulating sleeve ➂ over the soldered contact. 2.4 Close the access hole with the flat screw ➄. Push the bend relief (if used) onto the collet nut ➀. 2.4 Close the connector hole with the flat screw ➃. Push the bend relief (if used) onto the crimping tube ➀. Note: these terminating instructions apply to the following models: Note: these terminating instructions apply to the following models: M6 = FLA M7 = FLS, FLV www.lemo.com 01 SERIES www.lemo.com ® ® 01 Series The plugs and sockets of the 01 series are amongst the smallest available 50 Ω coax connectors with a self-latching intermating capability. In spite of their small size and light weight, their technical characteristics remain excellent. Available in a wide range of housing configurations, they are especially useful when connecting onto printed circuit boards. Metal housing models (page 46) Fixed plug Straight plugs FPA FFS Fixed sockets Elbow socket Fixed socket Fixed coupler ERA EPL PSS RAD Free socket Free coupler PCS RMA Elbow plugs FFH ECP Plug with resistor FLS EPA FRT T-plug with two sockets FLH FTA Adaptors (See page 50) T-coupler RTA ABA Threated-latching models (See page 50) FVS 44 EVP HEV www.lemo.com ® ® Part Numbering System Plug FFS . 01 . 250 . D L A E 31 Free socket PCS . 01 . 250 . D L L E 31 Cable ø Collet type: E = with cable crimping Contact type: A = male solder L = female solder Fixed plug FPA . 01 . 250 . D L D Fixed socket ERA . 01 . 250 . D L L Contact type: L = female solder N = female print D = male print Fixed coupler RAD . 01 . 250 . D L M Series: 01 Contact type: M = female-female F = female-female-male X = female-female-female Insert configuration: 250 = coaxial (50 Ω) Insulator: L = PEEK K = PCTFE Model: (page 44) Housing : N = brass nickel-plated 1) D = brass gold-plated Note: 1) treatment not available for the printed circuit models Part Number Example FFS.01.250.DLAE31 = straight plug for cable crimping, 01 series, coaxial type 50 Ω, outer shell is gold-plated brass, PEEK insulator, male solder contact, type E crimp ferrule for cable group 2, 3 or 4. Part Section Showing Internal Components Straight plug Fixed socket 4 1 2 3 4 outer shell female contact hexagonal nut insulator 2 3 1 1 5 6 2 4 3 1 2 3 4 5 6 www.lemo.com outer shell latch sleeve crimp ferrule crimp backnut male contact insulator 45 ® ® Metal housing models Technical Characteristics Mechanical and climatical Characteristics Voltage Standing Wave Ratio Value Standard Test Contact retention force Cable pull off force 1) Connector pull off force > 60 N > 100 N > 110 N IEC 69512-8 IEC 69512-9 IEC 69512-8 15a 17c 15f Endurance > 1000 cycles IEC 69512-5 9a Operating temperature Note: - 55°C + 230°C The VSWR (Voltage Standing Wave Ratio) is the value representing the power reflected in a connection. In most cases, the working frequency range is where VSWR is ≤ 1.25. 1 VSWR 1.3 1) Depending on cable design 1N = 0.102 kg 50 Ω Electrical 1.2 Characteristics Impedance Operating voltage (50 Hz) Test voltage (50 Hz) Rated current Contact resistance Screen resistance Insulating resistance VSWR Value Standard Method 50 Ω – 0.3 kV rms – 1.0 kV rms IEC 60512-2 4A IEC 60512-3 1012 Ω IEC 60512-2 see chart N°1 beside 1.1 4a 5a 2a 1.0 3a 1000 2000 3000 4000 FFS + PCS 5000 f (MHz) Note : VSWR measured with a RG-174 A/U cable. According to IEC 60169-1-1 standard FFS Straight plug for cable crimping 20 14.5 ø5 Part number S4 FFS.01.250.DLAE24 FFS.01.250.DLAE31 Cable group Cond. Ø max Dielectric Ø max Sheath Ø max 1 2-3-4 0.55 0.55 0.95 1.65 2.35 3.0 S4 M1 Cable assembly (page 53) FFH Straight plug, non-latching for cable crimping 18 13 ø5 Part number FFH.01.250.DLAE31 Cable group Cond. Ø max Dielectric Ø max Sheath Ø max 2-3-4 0.55 1.65 3.0 S4 M1 46 Cable assembly (page 53) www.lemo.com ® ® FLS Elbow plug (90°) for cable crimping 12.1 ø 7.5 6.6 Part number 12 FLS.01.250.•LAE24 FLS.01.250.•LAE31 M2 Cable group Cond. Ø max Dielectric Ø max Sheath Ø max 1 2-3-4 0.5 0.5 0.95 1.65 2.35 3.0 Cable assembly (page 53) • = material of shell D or N FLH Elbow plug (90°) non-latching, for cable crimping 11 6 14.5 Part number FLH.01.250.•LAE31 M3 Cable group Cond. Ø maxi 2-3-4 0.4 Dielectric Ø Sheath Ø maxi maxi 1.65 3.0 Cable assembly, crimp contact (page 53) • = material of shell D or N FPA Straight plug, non-latching, for printed circuit 13 1 3 5 6 Part number Weight (g) FPA.01.250.DLD ø 0.9 1.5 P 4 PCB drilling pattern (page 53) ERA Fixed socket, nut fixing M5x0.5 10.5 ø8 ø6 4 Part number Weight (g) ERA.01.250.•LL 1.3 S5 S7 2 max P1 Panel cut-out (page 53) • = material of shell D or N Part number ø7 10.5 5.7 M5x0.5 ECP Fixed socket, nut fixing (back panel mounting) Weight (g) ECP.01.250.•LL 1.1 3.5 max P1 Panel cut-out (page 53) • = material of shell D or N www.lemo.com 47 ® ® EPA Straight socket for printed circuit 6 Part number ø 5.8 1 12 3 EPA.01.250.DLN ø 0.9 Weight (g) 1.6 P 4 PCB drilling pattern (page 53) EPL Elbow socket (90°) for printed circuit 12.5 6 8.5 10 ø6 Part number 3 EPL.01.250.DLN Weight (g) 3.2 1 P 4 PCB drilling pattern (page 53) ø 0.9 6 PCS Free socket for cable crimping 18 ø5 Part number S4 PCS.01.250.DLLE24 PCS.01.250.DLLE31 S4 M1 Cable group Cond. Ø max Dielectric Ø max Sheath Ø max 1 2-3-4 0.55 0.55 0.95 1.65 2.35 3.0 Cable assembly (page 53) PSS Fixed socket, nut fixing, for cable crimping M5x0.5 18 S7 Part number ø6 ø8 4 S4 3 maxi S5 PSS.01.250.DLLE24 PSS.01.250.DLLE31 Cable group Cond. Ø max Dielectric Ø max Sheath Ø max 1 2-3-4 0.55 0.55 0.95 1.65 2.35 3.0 M1 Cable assembly (page 53) P1 Panel cut-out (page 53) FRT Straight plug with resistor 17 ø5 11.5 Part number FRT.01.250.DLA50 Resistor Weight (g) 50 Ω 0.6W 1.0 Note: Non standard, on request only 48 www.lemo.com ® ® RAD Fixed coupler, nut fixing M5.5x0.5 14 4 ø8 ø 6.5 Part number RAD.01.250.DLM S5 S7 Weight (g) 1.8 P2 Panel cut-out (page 53) 2 maxi Note: Non standard, on request only RMA Free coupler 14 ø5 Part number RMA.01.250.DLM Weight (g) 1.1 FTA T-plug with two sockets in line ø 7.5 19 12.3 6.8 Part number FTA.01.250.DLF Weight (g) 2.6 Note: Non standard, on request only RTA T-coupler with three sockets 19 6 11.8 Part number www.lemo.com RTA.01.250.DLX Weight (g) 2.5 49 ® ® Threaded-latching models FVS Straight plug, threaded latching for cable crimping 20 18 ø 6.3 Part number FVS.01.250.NKAE31 6.5 Cable group Cond. Ø max Dielectric Ø max Sheath Ø max 2-3-4 0.55 1.65 3.0 S4 S4 M1 Cable assembly (page 53) M5x0.5 EVP Fixed socket, nut fixing for threaded latching plug 10.5 ø6 4 ø8 Part number M5x0.5 S7 EVP.01.250.NKL Weight (g) 1.2 2 max P1 HEV Fixed socket, round nut fixing for threaded latching plug, watertight (back panel mounting) 2 Part number ø6 ø8 2 M5x0.5 12.5 5.5 maxi 5.0 mini 3 min ~ 78mm Panel cut-out (page 53) HEV.01.250.NKL Weight (g) 2.3 S6 AWG 28 P3 Panel cut-out (page 53) ~ 88mm Note: this model is fitted with 2 wires AWG28 soldered before potting Adaptors ABA Adaptor from LEMO socket to BNC plug Part number 27 17.5 ø 14.5 ABA.01.250.NLL Weight (g) 50 www.lemo.com ® ® Spare parts L øB øA FFS Crimp ferrule Part number FFS.01.160.DA FFS.01.161.DA FFH.01.161.D• ● Material: Copper (UNS C 18700) nickel (3µm) + gold plated (0.5µm) 1) Cable group ØA Dim. ØB L 1 2-3-4 2-3-4 3.1 3.8 3.8 2.4 3.05 3.1 6 6 7 Note: 1) for models FFH and FLH Sockets and plugs to be crimped are always supplied with a crimp ferrule. To order this accessory separately, use the above part numbers. GEA Hexagonal nut 7 2 e ø8 Part number GEA.01.240.LN GEA.01.241.LN ● Material: Brass (UNS C 38500) nickel-plated (3 µm) e (mm) Models Weight (g) M5x0.5 M5.5x0.5 ERA, EVP, PSS RAD 0.39 0.31 Note: to order this accessory separately, use the above part number. GEB Round nut A M5 x 0.5 2 Part number 1 GEB.01.240.LN GEB.01.244.LN A (mm) Models Slot nb. Weight (g) Ø7 Ø8 ECP HEV 2 4 0.30 0.50 Note: to order this accessory separately, use the above part number. ● Material: Brass (UNS C 38500) nickel-plated (3 µm) www.lemo.com 51 ® ® Tooling DCB Spanner for round nut (for ECP and HEV model) 14.8 39 40 Part number of the nut Part number DCB.91.097.0TN ø 7.1 GEB.01.240.LN / GEB.01.244.LN ● Material: Blackened steel DPE Crimping tool with die Cable group Part number DPE.99.000.00 DPE.99.003.1K DPE.99.003.8K Crimp collet ref. Crimping tool with no die 1 E24 2-3-4 E31 1) 2) Note: 1) Hex cavity of DPE.99.123.1K can also be used 2) Hex cavity of DPE.99.123.8K can also be used DPN Dies A B DPN.99.003.1K DPN.99.003.8K for shield Die dimension For shield A B Cable group Part number 1 2-3-4 3.10 3.80 2.70 3.30 ● Dies material: Blackened steel DCP Flat spanner M Part number DCP.99.040.TC DCP.99.045.TC DCP.99.050.TC DCP.99.055.TC DCP.99.060.TC N S1 S1 L Dimensions (mm) L M N S1 70 70 78 78 78 0.95 2.00 2.00 2.00 2.00 10.5 10.5 12.6 12.6 12.6 4.0 4.5 5.0 5.5 6.0 ● Material: Chrome-plated steel DCP Set of flat spanners N S1 S2 M Part number M 95 2.5 21 8.1 S2 7.1 L DCP.91.001.TN Dimensions N S1 L ● Material: Blackened steel 52 www.lemo.com ® ® Panel cut-outs Panel cut-out P1 P2 P3 Cut-out Ø A + 0.1 0 L mini P1 P2 P3 Dimensions A L Model ERA-ECP-EVP-PSS RAD HEV 5.1 5.6 6.1 9.5 10.0 10.0 Recommended mounting nut torque: 1.5 Nm. PCB drilling pattern P4 Drill B = = B øA øC + 0.1 0 P4 A Dimensions B C 1.5 5.08 1.0 Model EPA, FPA, EPL + 0.1 0 Cable assembly Terminating of plugs and straight sockets with cable crimping (solder contact) M1 M2 M3 L ± 0.2 M• The cable assembly of the 01.250 requires specific stripping dimensions. See below. However the procedure is similar to the 00.250 series. See pages 41 and 42. S ± 0.2 T ± 0.2 www.lemo.com Cable assembly Model T S L M1 FFH-FFS-FVS PCS-PSS 3.5 6 10 M2 M3 FLS FLM 1.2 1.2 4 4 8.5 10 Instruction of the 00 series to use as a reference M5 (page 41) M7 (page 42) M7 (page 42) 53 ® 54 ® www.lemo.com ® ® Technical Characteristics Outer Shell Brass LEMO series 00 & 01 connectors have a brass outer shell as standard, and this is suitable for most general purpose applications, including civilian and military. The brass outer shells have a nickel-plated surface which ensures very good protection against most environments. Alternative protective coatings available are: – Nickel-chrome offering higher protection against salt air and most corrosive agents – Nickel-gold – Nickel-black chrome. After the black chrome treatment, the part is coated with a protective film. Plastic Materials A PEEK outer shell is available which offers excellent insulating properties and is mostly used in the medical industry. This material is suitable for gas or steam sterilization. Other Metallic Components In general, other components are manufactured from brass. However, bronze is used where good elasticity is required (for example: earthing crown). These parts are nickel or nickel-gold plated depending on the utilization. The shell surface is protected by anodizing which is available in six colors: blue, yellow, black, red, green, and natural. Materials and Treatment Component Material (Standard) Brass (UNS C 38500) Aluminium alloy PEEK Earthing crown Cu-Be (UNS C 17300) Latch sleeve Special Brass Crimp ferrule Copper (UNS C 18700) Locking washer Bronze (UNS C 52100) Hexagonal nut Brass (UNS C 38500) Other metallic components Brass (UNS C 38500) O-ring and gaskets Silicone or FPM Sealing resin Epoxy Outer shell, collet nut, conical nut or notched nut Nickel Cu Ni Surface Treatment (µm) Chrome Gold Cu Ni Cr Cu Ni Au 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 3 3 3 3 3 3 3 – – – – – – 3 – – – – – – 0.3 0.5 3 anodized beige colored – 0.5 3 – 0.5 3 – 0.5 3 – 0.5 3 – 0.5 3 – 0.5 3 without treatment – 0.5 Black Chrome Cu Ni Cr – 1 2 Notes: The surface treatment standards are as follows: – nickel FS QQ-N-290A, or MIL-C-26074C 1.5 1.5 1.5 0.5 0.5 0.5 – – – – – – – – – – – – – – – – – – – chrome FS QQ-C-320B – gold ISO 4523 – black chrome MIL-C-14538C with a minimum of 10 µm lacquer protection Electrical Characteristics Shell electrical continuity (measured according to IEC 60512-2 test 2f) Values with earthing crown and latch sleeve or inner-sleeve nickel R1 plated. R2 Values with gold-plated earthing crown and nickel plated latch sleeve or inner-sleeve. R3 Values with earthing crown and gold-plated latch sleeve or innersleeve. Serie 00 A mV G Serie 01 R1 (mΩ) R2 (mΩ) R3 (mΩ) R1 (mΩ) R2 (mΩ) R3 (mΩ) 3.5 2.8 2.0 N.A 2.3 1.5 Testing current: 1A A = Ammeter mV = Millivoltmeter G = Generator www.lemo.com 55 ® ® Insulator Technical Description Radiation resistance LEMO uses virgin quality PTFE for the insulator material of coaxial connectors, which guarantees excellent insulating properties. LEMO also proposes PEEK (Polyether Etherketone). Its higher mechanical strength and excellent radiation resistance make it ideal for most applications. PEEK PTFE rads 10 3 Gray (Gy) 10 1 10 4 10 2 Damage 10 5 10 3 10 6 10 4 10 7 10 5 10 8 10 6 10 9 10 10 10 7 10 8 radiation dose γ minimal to mild (almost always usable) mild to moderate (often satisfactory) moderate to severe (unusable) Technical Characteristics Property Dielectric strength Volume resistivity at 50% HR and 23°C Surface resistivity Thermal conductivity Comparative tracking index Dielectric constant (106 Hz) Dissipation factor (106 Hz) Maximum continuous service temperature Minimum continuous service temperature Water absorption in 24h at 23°C Radiation resistance Flammability rating Test method ASTM D 149 / IEC 60243 ASTM D 257 / IEC 60093 ASTM D 257 / IEC 60093 ASTM C 177 IEC 60112 ASTM D 150 / IEC 60250 ASTM D 150 / IEC 60250 – – ASTM D 570 / ISO R624 – UL 94 / UL 94 Unit PEEK PTFE kV/mm 19 - 25 17.2 - 24 Ω cm 1016 1018 Ω 1015 1017 W/K m 0.25 0.23 V CTI 150 CTI 500 – 3.2 - 3.5 2 - 2.1 – < 0.005 < 0.0003 °C 250 260 °C -53 -200 % < 0.3 < 0.01 Gy 107 2 102 – V0 V0 ● ● Note: the technical data contained in this chapter gives a general information about plastic materials used by LEMO as electrical insulator materials. LEMO reserves the right to propose new material which would have higher technical characteristics and to withdraw any material contained in this publication or others from LEMO and its subsidiary companies. LEMO only uses granulated, powdered plastic materials or bars from specialized suppliers. LEMO is not responsible, in any case, for these materials. ● Electrical Contact Technical Description Contact Material The secure, reliable electromechanical connection achieved with LEMO female contacts is mainly due to two important design features: 1. Prod proof entry which ensures perfect concentric mating even with well used and/or carelessly handled connectors. 2. The pressure spring that maintains a constant, even force on the male contact when mated. The leading edge of the spring is chamfered to slide smoothly on the male contact, preserving the gold-plated surface treatment and preventing undue wear. LEMO female electrical contacts are made from bronze (UNS C 54400). Bronze is chosen because of its high modulus of elasticity, its excellent electrical conductivity and a high mechanical strength. LEMO male solder and print contacts are made from brass (UNS C 38500). Male crimp contacts are made from brass (UNS C 34500) which is ideal for crimping onto the electrical conductor. Conductor retention method Both male and female contacts are available in crimp, solder or print versions. Insulation resistance between the contacts and contact/shell (measured according to IEC 60512-2 test 3a) Insulating material new after humidity test1) 56 Multipole PEEK Unipole PTFE > 1012 Ω > 1010 Ω > 1012 Ω > 1010 Ω Note: 1) 21 days at 95% RH according to IEC 60068-2-3. www.lemo.com ® ® Materials and Treatments Au Ni Cu Bronze Notes: the standard surface treatments are as follows: – Nickel FS QQ-N-290A or MIL-C-26074C – Gold ISO 4523 Surface treatment (µm) Cu Ni Au 1) Type Material (Standard) Male solder Male crimp Male print Brass (UNS C 38500) Brass (UNS C 34500) Brass (UNS C 38500) 0.5 3 1.0 Female solder Female crimp Female print Bronze (UNS C 54400) 0.5 3 1.5 1) minimum value Solder Contacts Features of the LEMO crimp contacts: The conductor bucket of these contacts is machined at an angle to form a cup into which the solder can flow. Design is compatible with the use of lead-free solder. – Quick and simple assembly – Insulator is not heated during contact to conductor assembly – High temperature applications possible – Increased conductor retention force ø 0.7 ø 0.6 Print contacts Print contacts are available in certain connectors versions, mostly for the straight or elbow sockets models. Connection is made on flexible or rigid printed circuits by soldering ø 0.6 ø 0.7 The LEMO crimp contacts are factory annealed to relieve internal stresses, and reduce the risk of the material work hardening during the crimping process. During this process, an induction heating machine designed by LEMO’s Research and Development Department is used (photo 2). ø 0.7 The square form crimp method is used (MIL-C-22520F, type 2) (photo 1). The crimp method requires a controlled compression to obtain a symmetrical deformation of the conductor strand and of the contact material. The radial hole in the side of the contact enables correct positioning of the conductor within the contact to be verified. A good crimping is characterized by a small conductor section reduction and by the quite closed free spaces. Contact Resistance in Relation to Numbers of Mating Cycles (mesured according to IEC 605/2-2 test 2a) Contact resistance (mΩ) 1000 3000 5000 cycles cycles cycles 5.6 5.7 ø 0.7 1.0 6.1 Gold thickness female outside (µm) inside (%) 1.5 70 A = inspection point 2 2.5 2.5 www.lemo.com Maximum values mesured after the mating cycles and the salt spray test according to IEC 60512-6 test 11f. Thickness comparison between the outside and the inside of female contacts male (µm) 1 ø 0.7 Crimp Contacts A A 57 ® ® Cable Fixing Cable fixing onto LEMO connectors is determined by the connector model. This is achieved either with a cable collet system or with hexagonal crimping (MIL-C-22520F, type 2). The collet system cable fixing is made without any special tooling. The crimping method guarantees a good electrical continuity of the shield which improves greatly the shielding efficiency of the cable/connector link. Material and Treatment Component Earthing sleeve Collet Crimp ferrule Collet nut Material (Standard) Brass (UNS C 38500) Brass (UNS C 38500) Copper (UNS C 18700) Brass (UNS C 38500) Surface Treatment (µm) Cu Ni 0.5 0.5 0.5 0.5 3 3 3 3 Note: collet nut tightening torque: maximum 0.25 Nm (1N = 0.102 kg) Technical tables VSWR effect on transmitted power VSWR VSWR (dB) Return loss (dB) 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 0 0.1 0.2 0.3 0.3 0.4 0.5 0.6 0.7 0.7 0.8 0.9 1.0 46.1 40.1 36.6 34.2 32.3 30.7 29.4 28.3 27.3 26.4 25.7 24.9 58 Transmiss. Reflected Transmit. Reflected loss voltage power power (dB) coefficient (%) (%) 0.000 0.000 0.000 0.001 0.003 0.003 0.004 0.005 0.006 0.008 0.010 0.012 0.014 0.00 0.00 0.01 0.01 0.03 0.02 0.03 0.03 0.04 0.04 0.05 0.05 0.06 100.0 100.0 100.0 100.0 100.0 99.9 99.9 99.9 99.9 99.8 99.8 99.7 99.7 0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.1 0.1 0.2 0.2 0.3 0.3 VSWR VSWR (dB) Return loss (dB) 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 1.1 1.1 1.2 1.3 1.4 1.4 1.5 1.6 1.7 1.7 1.8 1.9 1.9 24.3 23.7 23.1 22.6 22.1 21.7 21.2 20.8 20.4 20.1 19.7 19.4 19.1 Transmiss. Reflected Transmit. Reflected loss voltage power power (dB) coefficient (%) (%) 0.016 0.019 0.021 0.024 0.027 0.030 0.033 0.036 0.039 0.043 0.046 0.050 0.054 0.06 0.07 0.07 0.07 0.08 0.08 0.09 0.09 0.10 0.10 0.10 0.11 0.11 99.6 99.6 99.5 99.5 99.4 99.3 99.2 99.2 99.1 99.0 98.9 98.9 98.8 0.4 0.4 0.5 0.5 0.6 0.7 0.8 0.8 0.9 1.0 1.1 1.1 1.2 www.lemo.com ® ® Product safety notice PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION. IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS SITUATIONS. 1. SHOCK AND FIRE HAZARD Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue (such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock. Mated components should never be disconnected while live as this may result in an exposed electric arc and local overheating, resulting in possible damage to components. 2. HANDLING Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect components should be rejected or returned to the factory for verification. Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be used during installation and / or assembly in order to obtain safe and reliable performance. 3. USE Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to eliminate all risk of transmission of such voltages to any exposed metal part of the connector. 4. TEST AND OPERATING VOLTAGES The maximum admissible operating voltage depends upon the national or international standards in force for the application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the catalog however these may be influenced by PC board design and / or wiring harnesses. The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the test duration is 1 minute. 5. CE MARKING CE Marking is applied to a complete product or device, and implies that the device complies with one or several European safety directives. CE Marking can not be applied to electromechanical components such as connectors. 6. PRODUCT IMPROVEMENTS The LEMO Group reserves the right to modify and improve to our products or specifications without providing prior notification. www.lemo.com 59 ® 60 ® www.lemo.com LEMO complete product range B S K E F 00 • • 01 0A 3T 4A 4M 3K. 1D 93C Y 05 5G 2G 2C L H M R N 03 V W F P D K/S 01 DIN Unipole Multipole Coaxial 50 Ω Coaxial 75 Ω Multi Coaxial Mixed Coax + LV Triaxial 50 Ω Triaxial 75 Ω Mixed Triax + LV Quadrax High Voltage Multi High Voltage Mixed HV + LV Fibre Optic Multi Fibre Optic Mixed FO + LV Thermocouple Fluidic Multi Fluidic Mixed Fluidic + LV Most frequently used in darker colour • included in this catalogue B Series Keyed S Series K Series Keyed E Series F Series Keyed 00 Series 01 Series 0A Series 3T Series 4A Series 4M Series Keyed 3K.93C Series Keyed 1D Series Y Series 05 Series 5G Series Keyed 2G Series Keyed 2C Series L Series Keyed H Series M Series Keyed R Series Keyed N Series Keyed 03 Series Keyed V Series W Series Keyed Cable assembly K/S Series Keyed REDEL F Series P REDEL Series Keyed D REDEL Series 01 Series Keyed VAA Series SAA Series TAA Series No reproduction or use without express permission of editorial or pictorial content, in any manner. LEMO SA reserves the right to modify and improve specifications, at all times, without any notification. LEMO HEADQUARTERS SWITZERLAND LEMO SA Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com SUBSIDIARIES AUSTRIA LEMO Elektronik GesmbH Lemböckgasse 49/E6-3 1230 Wien Tel: (+43 1) 914 23 20 0 Fax:(+43 1) 914 23 20 11 sales@lemo.at NETHERLANDS / BELGIUM LEMO Connectors Benelux De Trompet 2108 1967 DC Heemskerk Tel. (+31) 251 25 78 20 Fax (+31) 251 25 78 21 info@lemo.nl CHINA LEMO Trading (Shanghai) Co., Ltd LEMO Electronics (Shanghai) Co., Ltd 5th Floor, Block 6, City of ELITE, 1000 Jinhai Road, Pudong Shanghai, China 201206 Tel: (+86 21) 5899 7721 Fax: (+86 21) 5899 7727 cn.sales@lemo.com NORWAY / ICELAND LEMO Norway A/S Stanseveien 6B 0975 Oslo Tel: (+47) 22 91 70 40 Fax: (+47) 22 91 70 41 info-no@lemo.com DENMARK LEMO Denmark A/S Gammel Mosevej 46 2820 Gentofte Tel: (+45) 45 20 44 00 Fax: (+45) 45 20 44 01 info-dk@lemo.com FRANCE LEMO France Sàrl 15/19 Avenue Graham Bell Bâtiment Balthus 4 Bussy Saint Georges 77607 Marne la Vallée Cedex 3 Tel: (+33 1) 60 94 60 94 Fax: (+33 1) 60 94 60 90 info-fr@lemo.com GERMANY LEMO Elektronik GmbH Hanns-Schwindt-Str. 6 81829 München Tel: (+49 89) 42 77 03 Fax: (+49 89) 420 21 92 info@lemo.de HONG KONG LEMO Hong Kong Ltd Unit 1207, 12/F, Corporation Square, 8 Lam Lok Street, Kowloon Bay, Kowloon - Hong Kong Tel: (+852) 2174 0468 Fax: (+852) 2174 0492 hk.sales@lemo.com HUNGARY REDEL Elektronika Kft Nagysándor József u. 6-12 1201 Budapest Tel: (+36 1) 421 47 10 Fax: (+36 1) 421 47 57 redelemo@lemo.hu ITALY LEMO Italia srl Viale Lunigiana 25 20125 Milano Tel: (+39 02) 66 71 10 46 Fax: (+39 02) 66 71 10 66 sales.it@lemo.com JAPAN LEMO Japan Ltd 4-10-3, Takaido Higashi, Suginami-ku, Tokyo, 168-0072 Tel: (+81 3) 53 44 39 33 Fax: (+81 3) 53 44 39 35 lemoinfo@lemo.co.jp LEMO SINGAPORE LEMO Asia Pte Ltd 4 Leng Kee Road, #06-09 SiS Building Singapore 159088 Tel: (+65) 6476 0672 Fax: (+65) 6474 0672 sg.sales@lemo.com SPAIN / PORTUGAL IBERLEMO S.A. Brasil, 45, 08402 Granollers Barcelona Tel: (+34 93) 860 44 20 Fax: (+34 93) 879 10 77 info-es@lemo.com Madrid Office Antonio López, 96, 28019 Madrid Tel: (+34 91) 469 99 19 Fax: (+34 91) 469 99 59 SWEDEN / FINLAND LEMO Nordic AB Mariehällsvägen 39A 168 65 Bromma Tel: (+46 8) 635 60 60 Fax: (+46 8) 635 60 61 info-se@lemo.com SWITZERLAND LEMO Verkauf AG Grundstrasse 22 B 6343 Rotkreuz Tel: (+41 41) 790 49 40 Fax: (+41 41) 790 49 43 ch.sales@lemo.com UNITED KINGDOM LEMO UK Ltd 12-20 North Street Worthing West Sussex, BN11 1DU Tel: (+44 1903) 23 45 43 Fax: (+44 1903) 20 62 31 lemouk@lemo.com USA LEMO USA Inc P.O. Box 2408 Rohnert Park, CA 94927-2408 Tel: (+1 707) 578 88 11 (+1 800) 444 53 66 Fax:(+1 707) 578 08 69 info@lemousa.com DISTRIBUTORS AUSTRALIA, BRAZIL, CANADA, CZECH REPUBLIC, GREECE, INDIA, ISRAEL, NEW ZEALAND, PAKISTAN, POLAND, RUSSIA, SOUTH AFRICA, SOUTH KOREA, TAIWAN, TURKEY, UKRAINE www.lemo.com © CAT.NC.LEN.P0509 LEMO
FFS.01.160.DA 价格&库存

很抱歉,暂时无法提供与“FFS.01.160.DA”相匹配的价格&库存,您可以联系我们找货

免费人工找货