Volume 4C: Circuit Protection
Bussmann series solutions
Don't miss a sale or an opportunity to upgrade your fuse protection
Three tiers offer distinct levels of circuit protection
1. Ultimate - Unique element designs deliver a powerful
combination of operating characteristics in one fuse — fast shortcircuit protection, current limitation, and time-delay with up to 300
kA interrupting ratings.
2. Advanced - Choose between fast-acting, short-circuit, current
limiting protection or time-delay energy efficient, current limiting
protection based on the application with 200 kA interrupting
ratings.
Ultimate
3. Basic - Basic single-element protection for service, feeder and
branch circuit applications with up to 100 kA interrupting ratings.
The arrows below show you the way
CUBEFuse™ protection
For finger-safe protection in a small footprint up to 600 V and 100
A, upgrade to the time-delay or fast-acting CUBEFuse. Amp rating
rejection feature helps prevent overfusing in the CUBEFuse holder
(page 1-11) or CCP2-CF UL 98 disconnect switch (page 11-6).
Advanced
Advanced
FRN-R-(amp)
Class RK5 - 250 V
See page 1-23
LPN-RK-(amp)SP
Class RK1 - 250 V
See page 1-18
NON-(amp)
Class H(K) - 250 V
See page 1-15
KTN-R-(amp)
Class RK1 - 250 V
See page 1-21
FRS-R-(amp)
Class RK5 - 600 V
See page 1-23
LPS-RK-(amp)SP
Class RK1 - 600 V
See page 1-18
FCF(amp)
Class CF fast-acting
finger-safe CUBEFuse up
to 100 A with amp rating
rejecting holders to help
prevent overfusing
See page 1-9
TCF(amp)
Class CF time-delay
Finger-safe CUBEFuse up
to 100 A with amp rating
rejecting holders to help
prevent overfusing
See page 1-8
Basic
NOS-(amp)
Class H(K) - 600 V
See page 1-15
KTS-R-(amp)
Class RK1 - 600 V
See page 1-21
LPJ-(amp)SP
Class J time-delay
See page 1-13
JKS-(amp)
Class J fast-acting
See page 1-14
LP-CC-(amp)
Class CC time-delay
See page 1-5
FNQ-R-(amp)*
KTK-R-(amp)
Class CC time-delay Class CC fast-acting
See page 1-6
See page 1-7
KRP-C-(amp)SP
Class L time-delay
See page 1-16
KTU-(amp)
KLU-(amp)
Class L fast-acting Class L time-delay
See page 1-17
See page 1-18
* FNQ-R fuses are suggested on primary of control transformers - do NOT upgrade to LP-CC.
Introduction
Contents
Description
Catalog section
Selecting fused circuit protection
The power of space
From the revolutionary
BussmannTM series CUBEFuse
to its unique fuse holder or
Compact Circuit Protector,
we’re continually innovating
to give you products that help
you go big, by going small.
Introduction
Low voltage branch circuit fuses
1
Low voltage supplemental fuses and limiters
2
Electronic, PCB and small dimension fuses
3
High speed fuses
4
IEC and British Standard fuses
5
Photovoltaic fuses, holders and blocks
6
Medium voltage fuses
7
Fuse blocks and holders
8
Power distribution and terminal blocks
9
Connector products
10
Disconnect switches
11
Quik-Spec™ electrical gear
12
Surge protective devices
13
Telecom protection products
14
Accessories
15
Fuse sizing for 600 V building electrical systems
Selective coordination
Low voltage, branch circuit fuse types and classes
Glossary of common electrical terms
16
Electrical formulas
Fuse and fuse block cross reference
Catalog number index
Low-Peak™ Upgrade program and fuse inventory
consolidation
Inside back cover
Bussmann series circuit protection solutions comply with major industrial standards and agency requirements such as: BS, IEC, DIN, UL, NEMA, CSA, CE, C-UL, etc. and are manufactured at facilities
that are ISO 9000 certified.
This catalog is intended to present product data and provide technical information that will help the end user with design application. Eaton reserves the right, without notice, to change design or
construction or any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this catalog.
Once a product has been selected, it should be tested by the user in all possible applications. Further, Eaton takes no responsibility for errors or omissions contained in this catalog, or for misapplication
of any Eaton product. Extensive product information is available in the Eaton product data sheets available on line at Eaton.com/bussmannseries.
©2018 Eaton
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
i
Introduction
Selecting fused circuit protection
The following fuse selection tables are based on the 2017 NEC and
provide fuse recommendations for the listed applications.
Application Engineering can be reached via phone (toll-free 855-2877626 ) and email (FuseTech@Eaton.com).
These are only suggestions. Final fuse selection should be
performed by qualified personnel able to fully assess an application's
circuit protection requirements.
To locate the recommended fuse product pages, use the index
starting on page 16-4.
If you need assistance in selecting a fuse, contact the Eaton
Application Engineering team Monday through Friday, 7:00 a.m. —
5:00 p.m. Central time.
Ballasts
Location
Type
Fluorescent
Notes
Fuse recommendation
Fuse holder recommendation
Consult fixture manufacturer for size
and type
GLR, GMF, GRF
HLR
GLQ, GMQ
HLQ
BAF, KTK, FNM, FNQ
HPF, HPS
KTK-R, FNQ-R, LP-CC
HPS-RR, HPF-RR
Indoor
All other (mercury,
sodium, etc.)
Outdoor
Mercury, sodium, etc.
Consult fixture manufacturer for size
and type
Consult fixture manufacturer for size
and type.
BBS
HPS-L, HPF-L
SC up to 15 amps
HPF-EE, HPS-EE
SC 20 amp
HPF-JJ, HPS-JJ
SC 25-30 amps
HPF-FF, HPS-FF
BAF, KTK, FNM, FNQ
HEB, HEX, HPC-D
KTK-R, FNQ-R, LP-CC
HEY, HEZ
Capacitors (NEC 460)
Protected by
Sizing
Time-delay fuses
150% to 175% of Full Load Current (FLC)
Non time-delay fuses
250% to 300% of Full Load Current (FLC)
Fuse/volt recommendation
Up to 250 V: LPN-RK_SP, FRN-R
Up to 600 V: LPS-RK_SP, FRS-R, LPJ_SP, LP-CC, FNQ-R, TCF
Up to 250 V: KTN-R
Up to 300 V: JJN
Up to 600 V: KTS-R, JKS, KTK-R, JJS, FCF_RN
On loadside of motor
running overcurrent
device
Protection recommended as shown, but not required
—
Electric heat (NEC 424)
Heating type
Sizing
Fuse/volt recommendation
Space heating
125% or next size larger but in no case larger than 60
amps for each subdivided load
Up to 250 V: LPN-RK_SP, FRN-R, NON
Boilers (ASME
rated and stamped
vessel)
125% or next size larger but in no case larger than 150
amps for each subdivided load
ii
Up to 300 V: JJN
Up to 480 V; SC 25 to SC 60
Up to 600 V: LPS-RK_SP, FRS-R, NOS, JJS, LPJ_SP, LP-CC,
FNQ-R, JKS, KTK-R, TCF, SC 1/2 to SC 20, FCF_RN
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Introduction
Mains, feeders, branches (NEC 430)
Circuit type
Circuit loads
Sizing
Fuse/volt recommendation
Up to 250 V: LPN-RK_SP, FRN-R
Feeder circuits
≤ 600 A
Main, branch
and feeder
circuits
(601-6000 A)
Up to 300V: JJN
No motor load
100% of non-continuous load plus 125% of continuous load
Combination motor
and other loads
150% of the FLA of largest motor (if there are two or more
motors of same size, one is considered to be the largest)
plus the sum of all the FLA for all other motors plus 100% of
non-continuous, non-motor load plus 125% of continuous, nonmotor load. A maximum of 175% (or the next standard size if
175% does not correspond to a standard size) is allowed for all
but wound rotor and all DC motors.
Up to 600 V: LPS-RK_SP, FRS-R, JJS,
LPJ_SP, LP-CC, JKS, KTK-R
Motor loads
150% of the FLA of largest motor (if there are two or more
motors of same size, one is considered to be the largest) plus
the sum of all the FLA for all other motors. A maximum of
175% (or the next standard size if 175% does not correspond
to a standard size) is allowed for all but wound rotor and all DC
motors.
—
150% to 225% of full load current of largest motor plus 100%
of full load current of all other motors plus 125% of continuous
non-motor load plus 100% of non-continuous non-motor load
Up to 250 V: LPN-RK_SP, FRN-R
Up to 600 V: LPS-RK_SP, FRS-R,
LPJ- SP, LP-CC
Up to 600 V: KRP-C_SP
Motor loads (NEC 430)
Circuit voltage
Fuse type
Fuse sized for
Backup overload with
motor starter and shortcircuit protection
Time-delay
fuses
Above 600 V
—
Fuse/volt recommendation
Up to 250 V: FRN-R
125% of motor FLA or next size larger
Up to 600 V: FRS-R
Up to 250 V: LPN-RK_SP
130% of motor FLA or next size larger
Up to 600 V: LPS-RK_SP
Short-circuit only
175% of motor FLA or next size larger. (If
175% does not correspond to a standard
size). If this will not allow motor to start,
due to higher than normal inrush currents
or longer than normal acceleration times (5
seconds or greater), fuse may be sized up to
225% or next size smaller. NOTE: 150% for
wound rotor and all DC motors.
Short-circuit only
Maximum of 300% of motor FLA or next
size larger (if 300% does not correspond to
a standard size). If this will not allow motor
to start due to higher than normal inrush
currents or longer than normal acceleration
times (5 seconds or greater), fuses through
600 amps may be sized up to 400% or next
size smaller. Note: 150% for wound rotor
and all DC motors.
—
Compare the minimum melting time-current
characteristics of the fuses with the timecurrent characteristics of the overload relay
curve. The size fuse which is selected
should be such that short-circuit protection
is provided by the fuse and overload
protection is provided by the controller
overload relays.
600 V and less
Non-time delay
and all Class
CC fuses
Sizing
Up to 250 V: LPN-RK_SP, FRN-R
Up to 600 V: LPS-RK_SP, FRS-R,
LPJ_SP, TCF
Up to 250 V: KTN-R
Up to 300 V: JJN
Up to 600 V: KTS-R, JJS, LP-CC, JKS,
KTK-R, FCF_RN
Up to 2400 V: JCH, JCK, JCK-A,
JCK-B, 2ACLS, 2BCLS, 2CLS, 2HCLS
Up to 4800 V: JCL, JCL-A, JCL-B,
5ACLS, 5BCLS, 5CLS, 5HCLS
Up to 7200 V: 7BCLS, 7.2WKMSJ,
8ACLS, 8CLS
Solenoids (coils)
Fuse type
Sizing
Branch circuit
Size at 125% or next size smaller
Fuse/volt recommendation
Up to 250 V: LPN-RK_SP, FRN-R (best)
Up to 600 V: LPS-RK_SP, FRS-R, LPJ_SP, LP-CC, FNQ-R, TCF
Up to 32 V: MDL 9-30 A, FNM 20-30 A
Supplemental
Size at 125% or next size larger
Up to 125 V: MDA 25-30 A, FNM 12-15 A
Up to 250 V: MDL 1/16-8 A, MDA 2/10-20 A, FNM 1/10-10 A, MDQ 1/100-7 A
Up to 500 V: FNQ 1/10-30 A
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
iii
Introduction
Transformers 600 V nominal or less (NEC 450.3)
Protection type
Primary
only (Note:
components on
the secondary
still need
overcurrent
protection)
Thermal
overload
protection
—
Without
Transformer
impedance
—
—
≤ 6%
Primary and
secondary
Rated
current
Optimum
protection*
NEC maximums
Primary
< 2 amps
125% or next
size larger
300% or next size smaller (see
NEC 430.72(C) for control circuit
transformer maximum of 500%)
Primary
≥ 2 amps
but < 9
amps
125% or next
size larger
167% or next size smaller
Primary ≥
9 amps
125% or next
size larger
125% or next size larger**
Secondary
< 9 amps
(see A)
A = 250%
Secondary
< 9 amps
(see C)
C = 600%
Secondary
< 9 amps
(see E)
With
> 6% but
< 10%
% of primary FLA (or next FLA
size smaller)
Secondary
≥ 9 amps
(see B)
Secondary
≥ 9 amps
(see D)
Fuse/volt recommendation
Up to 250 V: LPN-RK_SP,
FRN-R
B = 250%
Primary and
secondary
fuses at 125%
of primary and
secondary FLA
or next size
larger
Up to 600 V: KRP-C_SP,
LPJ_SP, LPS-RK_SP, FNQ-R,
FRS-R, TCF
D = 600%
E = 400%
F = 400%
% of secondary FLA
A = 167% or next size smaller
B = 125% or next size larger**
C = 167% or next size smaller
Secondary
≥ 9 amps
(see F)
D = 125% or next size larger**
E = 167% or next size smaller
F = 125% or next size larger**
* When sizing the primary fuse for optimum protection, verify the inrush current with the transformer manufacturer and review fuse time-current characteristics.
** When 125% of FLA corresponds to a standard rating, the next larger size is not permitted.
iv
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Introduction
Transformers over 600 V nominal (NEC 450.3)
Supervised installations
Protection for
Primary only
Transformer
impedance
Primary Sizing
N/A
Code maximum of 250%
or next standard size if
250% does not correspond
to a standard rating
Note: Components on
the secondary still need
overcurrent protection
≤ 6%
Secondary
volts
Secondary sizing
Up to 250 V: LPN-RK_SP, FRN-R
N/A
Up to 600 V: LPS-RK_SP, LPJ-_SP, KRP-C_SP,
FRS-R, FNQ-R, TCF
N/A
Up to 2.475 kV: 2NCLPT, 2CLPT
Up to 2.75 kV: 2CLE, 2HLE
Up to 2750/5500 V: JCW
> 600 V
At code maximum
of 250%
≤ 600 V
At code maximum
of 250%
Up to 5.5 kV: 5HLE, 5CLE, 5HCL, 5BHCL,
5BHLE, 5AHLE, JCY, MV05, 5.5 ABWNA, 5.5
AMWNA, 5.5 FFN
> 600 V
At code maximum
of 225%
7 Up to 7.2 kV:.2 AMWNA, 7.2 TDLSJ, 7.2
TFLSJ
At code maximum of 300%
Primary and
secondary
> 6% but
< 10%
Fuse/volt recommendation
At code maximum of 300%
≤ 600 V
At code maximum
of 250%
Up to 8.3 kV: 8HLE, 8CLE, 8BHLE, 8AHLE,
8CLPT, 8NCLPT, 8HCL, 8.25 FFN
Up to 15.5 kV: 15CLPT, 15NCLPT, 15CLE,
15HLE, 15BHLE, 15LHLE, 15HCL, 15BHCL,
MV155, 15.5 CAVH
Up to 17.5 kV: 17.5 CAV, 17.5 TDM
Up to 24 kV: 24 TDM, 24 TFM, 24 FFM
Up to 36 kV: 36 CAV, 36 TDQ, 36 TFQ
Up to 38 kV: 38CLPT, 38 CAV
Unsupervised installations
Transformer
impedance
≤ 6%
Primary Sizing
At code
maximum of
300% or next
standard size if
300% does not
correspond to a
standard rating
Secondary
volts
Secondary sizing
Fuse/volts recommendation
Up to 250 V: LPN-RK_SP, FRN-R
> 600 V
At code maximum of 250% or
next standard size if 250% does
not correspond to a standard
rating
Up to 2475 V: 2NCLPT, 2CLPT
≤ 600 V
At code maximum of 125% or
next standard size if 125% does
not correspond to a standard
rating
At code maximum of 225% or
next standard size if 225% does
not correspond to a standard
rating
Up to 5.5 kV: 5HLE, 5CLE, 5HCL, 5BHCL, 5BHLE,
5AHLE, JCY, MV05, 5.5 ABWNA, 5.5 AMWNA, 5.5 FFN
> 600 V
> 6% but < 10%
At code
maximum of
300% or next
standard size if
300% does not
correspond to a
standard rating
≤ 600 V
At code maximum of 125% or
next standard size if 125% does
not correspond to a standard
rating
Up to 600 V: LPS-RK_SP, LPJ-_SP, KRP-C_SP, FRS-R,
FNQ-R, TCF
Up to 2.75 kV: 2CLE, 2HLE
Up to 2750/5500 V: JCW
Up to 7.2 kV: 7.2 AMWNA, 7.2 TDLSJ, 7.2 TFLSJ
Up to 8.3 kV: 8HLE, 8CLE, 8BHLE, 8AHLE, 8CLPT,
8NCLPT, 8HCL, 8.25 FFN
Up to 15.5 kV: 15CLPT, 15NCLPT, 15CLE, 15HLE,
15BHLE, 15LHLE, 15HCL, 15BHCL, MV155, 15.5 CAVH
Up to 17.5 kV: 17.5 CAV, 17.5 TDM
Up to 24 kV: 24 TDM, 24 TFM, 24 FFM
Up to 36 kV: 36 CAV, 36 TDQ, 36 TFQ
Up to 38 kV: 38CLPT, 38 CAV
Solid state devices (diodes, SCRs, triacs, transistors)
Protection type
Sizing
Fuse/volts recommendation
Up to 130 V: FWA
Up to 250 V: FWX
Short-circuit only
F, S, K, and 170M fuse families sized up to several sizes
larger than full load RMS or DC rating of device
Up to 500 V: FWH
Up to 600 V: FWC, KAC, KBC
Up to 700 V: FWP, 170M_, SPP
Up to 1000 V: FWJ, 170M_, SPJ
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
v
BUSSMANN
SERIES
Do you know about
the new 2017 NEC®
SCCR requirements?
Finding out is easy.
Eaton’s Bussmann™ series handbook Code changes affecting Short-Circuit
Current Ratings based on the 2017 NEC will help you:
Know why SCCR is important.
Understand hazards associated with insufficient SCCR.
Know what specific NEC chapters, articles, parts and sections are involved.
Comply with Code requirements for marking and documenting SCCR.
If you’re designing, installing or inspecting equipment, download your copy at
Eaton.com/nec2017sccr.
Or, check out our comprehensive SCCR resources at
Eaton.com/bussmannseries/SCCR.
Follow us on social media to get the
latest product and support information.
Low voltage, branch circuit fuses — 1
Section
page
Description
Fuse holder and block selection guide
2
Fuse reducers
Branch circuit fuse dimensions
Fuse class
The power of space
Catalog symbol
LP-CC
CC
5
FNQ-R
600 V
6
KTK-R
7
TCF
The revolutionary BussmannTM series
Low-PeakTM CUBEFuseTM delivers the
smallest footprint compared to any Class
J or RK fuse solution — requiring up to
70% less space when combined with its
unique fuse holder.
3-4
Volts
CF
G
600 V
FCF
WCF
690 V
11
600 V
12-17
SC
600/480 V
LPJ-_SPI indicator
600 V
JKS
H(K)
250 V
NOS
600 V
KRP-CL (225 to 600 A)
KTU
LPN-RK_SPI indicator
LPS-RK_SP
LPS-RK_SPI indicator
600 V
24-26
600 V
250 V
KTS-R
600 V
FRN-R_ID indicator
FRS-R
FRS-R_ID indicator
29-30
600 V
JJN
300 V
JJS
600 V
31-32
33
P, S, T and TC
MB Edison base circuit breakers
27-28
250 V
SL, TL and W
Plug fuses
23
250 V
KTN-R
FRN-R
T
21
24
LPN-RK_SP
RK5
19
22
KLU
RK1
18
20
NON
KRP-C_SP
L
10
TCFH_ Class CF holders
LPJ-_SP
J
8-9
34
125 V
SA fuse adapters
Box cover units
35
36
For conductor protection, see cable limiters in Section 2,
page 3.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-1
Low voltage,
branch circuit fuses
Contents
1 — Low voltage, branch circuit fuses
Fuse holder and block selection guide
Catalog pages for the blocks and holders are denoted parenthetically "()" next to their catalog symbol.
Fuse class
Catalog symbol
Blocks
DIN-Rail holders
Panel mount holders
In-line holders
CC
FNQ-R
KTK-R
LP-CC
BCM (8-6)
3743 (8-14)
4421 (8-14)
4515 (8-14)
CHCC (8-8)
OPM-1038 (8-12)
OPM-NG (8-13)
CCP2-CC††† (11-2)
HPF-RR (8-43)
HPS-RR (8-45)
CCPLP††† (30 A) (11-32)
HEY (8-53)
HEZ (8-52)
CF
FCF
TCF
WCF††
TCFH (1-13)
TCFHNW (1-13)
(Panel and DIN-Rail mount)
CCP2-CF††† (11-6)
CCP2B††† (11-29)
—
—
HEC (30 A) (8-49)
HEG (15 A) (8-49)
HEH (20 A) (8-49)
HEJ (60 A) (8-49)
G
SC
BG (8-15)
G (8-15)
—
CCPLP††† (20 A) (11-32)
HPG-EE (15 A) (8-44)
HPS-EE (15 A) (8-45)
HPS-FF (30 A) (8-45)
HPS-JJ (20 A) (8-45)
H(K) 250 V
NON (250 V)
HM25_ (8-19)
HM25060_MW* (8-24)
—
—
—
H(K) 600 V
NOS (600 V)
HM60_ (8-19)
HM60030_MW* (8-24)
—
—
—
J
LPJ
JKS
JM60_ (8-31)
JM60_MW* (8-33)
JP60030 (8-30)
CH_J (8-28)
JT(N) (8-29)
—
—
L
KRP-C
KRP-CL
KLU
KTU
51215**
51235**
—
—
—
RK1 250 V
LPN-RK
KTN-R
RM25_ (8-21)
RM25_MW* (8-26)
—
—
—
RK1 600 V
LPS-RK
KTS-R
RM60_ (8-21)
RM60_MW* (8-26)
—
—
—
RK5 250 V
FRN-R
RM25_ (8-21)
RM25_MW* (8-26)
—
—
—
RK5 600 V
FRS-R
RM60_ (8-21)
RM60_MW* (8-26)
—
—
—
T 300 V
JJN
T300 (8-35)
T 600 V
JJS
T600 (8-37)
—
—
—
T up to 600 V
JJN/JJS
BH-0_, BH-1_, BH-3_† (8-39)
P, T, TC, TL, W Edison base
Box cover units (1-30)
—
—
—
S, SL rejection base
SA adapters (1-29)
—
—
—
Plug fuses
* Power distribution fuse blocks.
** Up to 800 A, contact customer satisfaction at 855-287-7626 for more information.
† Various blade bolt-on up to 700 A, see data sheets for limitations.
†† WCF (wind CUBEFuse) is rated to 690 V and is not a UL Listed Class CF fuse and can only be applied in the TCFHNW holder.
††† UL 98 Listed disconnect switch, available in 1-, 2- and 3-pole versions.
250 V Class R fuse reducers
Equipment fuse clip
amps
Desired fuse (case)
amp size
60
100
200
400
600
* Single reducer only (pair not required).
1-2
600 V Class R fuse reducers
Catalog no. (pairs)
Equipment fuse clip
amps
30
NO.263-R
60
30
NO.213-R
60
NO.216-R
60
NO.226-R
100
NO.2621-R
100
NO.2641-R
200
NO.242-R
100
NO.2661-R
200
NO.2662-R
400
NO.2664-R*
Desired fuse (case)
amp size
100
200
400
600
Catalog no. (pairs)
30
NO.663-R
30
NO.216-R
60
NO.616-R
60
NO.626-R
100
NO.2621-R
100
NO.2641-R
200
NO.642-R
100
NO.2661-R
200
NO.2662-R
400
NO.2664-R*
* Single reducer only (pair not required).
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Branch circuit fuse dimensions
Class J — in (mm)
Class CC — in (mm)
LPJ and JKS
LP-CC, FNQ-R, KTK-R and LP-CC
A
A
C
D
E B
A
B
Amp range
E
H
A
B
1.5 (38)
0.41 (10)
Amp
range
B
G
70 to 600A
1 to 60A
Up to 30
I F
Low voltage,
branch circuit fuses
Low voltage, branch circuit fuses — 1
A
B
C
D
E
F
G
H
I
Class CF — in (mm)
1-30
2.25
(57)
0.81
(21)
—
—
0.5
(13)
—
—
—
—
TCF, FCF and WCF
35-60
2.38
(60)
1.06
(27)
—
—
0.63
(16)
—
—
—
—
70-100
4.63
(118)
1.13
(29)
3.63
(92)
2.63
(67)
1.0
(25)
0.75
(29)
0.13
(3)
0.41
(10)
0.28
(7)
110200
5.75
(146)
1.63
(41)
4.38
(111)
3.0
(76)
1.38
(35)
1.13
(29)
0.19
(5)
0.38
(10)
0.28
(7)
225400
7.12
(181)
2.11
(54)
5.25
(133)
3.26
(83)
1.87
(48)
1.62
(41)
0.25
(6)
0.56
(14)
0.4
(10)
450600
8.0
(203)
2.6
(66)
6.0
(152)
3.31
(84)
2.12
(54)
2.0
(51)
0.53
(14)
0.72
(18)
0.53
(14)
B
C
A
Up to 100 A
D
E
B
C
Class RK1 and RK5 — in (mm)
FRN-R, KTN-R LPN-RK (250 V) and FRS-R, KTS-R LPS-RK (600 V)
A
110 to 400 A
A
A
B
D
E
Fuse
amps
A
B
C
1-15
17-1/2*
20
1.88 (48)
0.75 (19)
1.0 (25)
D
B
Up to 60 A
70 to 600 A
Basic dimensions are same as Class H, one-time (NON and NOS)
fuses. Note: relating to dimensional compatibility these fuses can
replace existing Class H, RK1 and RK5 fuses.
E
250 V fuses
600 V fuses
0.23 (6)
Amp range
A
B
A
B
0.27 (7)
Up to 30
2 (51)
0.56 (14)
5.0 (127)
0.81 (21)
35-60
3 (76)
0.81 (21)
5.5 (140)
1.06 (27)
7.88 (200)
1.34 (34)
25-30
0.31 (8)
35-40
0.36 (9)
70-100
0.44 (11)
110-200
7.13 (181)
1.56 (40)
9.63 (245)
1.84 (47)
225-400
8.63 (219)
2.38 (61)
11.63 (295)
2.59 (66)
450-600
10.38 (264)
2.88 (73)
13.38 (340)
3.13 (80)
45-50
2.13 (54)
60
1.0 (25)
70
80-90
1.13 (29)
0.67 (17)
3.01 (76)
1.26 (32)
100
0.49 (12)
0.64 (16)
0.57 (14)
110
0.51 (13)
125
0.51 (13)
150
0.51 (13)
175
3.62 (92)
2.9 (74)
1.34 (34)
1.02 (26)
0.57 (14.5)
225
0.63 (16)
250
0.73 (18.5)
350
4.25 (108)
400
3.46 (88)
1.69 (43)
1.47 (36)
5.88 (149)
1.06 (27)
RK1 LPN-RK, LPS-RK
70-100
5.88 (149)
1.16 (30)
7.88 (200)
1.16 (30)
110-200
7.13 (181)
1.66 (42)
9.63 (245)
1.66 (42)
225-400
8.63 (219)
2.38 (61)
11.63 (295)
2.38 (61)
450-600
10.38 (264)
2.88 (73)
13.38 (340)
2.88 (73)
0.57 (14.5)
200
300
RK5 FRN-R, FRS-R, — RK1 KTN-R, KTS-R
0.79 (20)
0.86 (21.5)
0.86 (21.5)
* Time-delay (TCF) only.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-3
1 — Low voltage, branch circuit fuses
Class T — in (mm)
JJN (300 V) and JJS (600 V)
A
C
D
A
A
B
B
1.0 (25)
B
JJN up to 60 A
JJS up to 30 A
JJN 70 to 1200 A
JJS 70 to 800 A
JJS 35 to 60 A
300 V JJN
600 V JJS
Amp range
A
B
C
D
Amp range
A
B
C
D
Up to 30
0.88 (22)
0.41 (10)
—
—
Up to 30
1.50 (38)
0.56 (14)
—
—
35-60
0.88 (22)
0.56 (14)
—
—
35-60
1.56 (40)
0.81 (21)
—
—
70-100
2.16 (55)
0.75 (19)
1.56 (40)
0.84 (21)
70-100
2.95 (75)
0.75 (19)
2.36 (60)
1.64 (42)
110-200
2.44 (62)
0.88 (22)
1.69 (43)
0.84 (21)
110-200
3.25 (83)
0.88 (22)
2.50 (64)
1.66 (42)
225-400
2.75 (70)
1.00 (25)
1.84 (47)
0.86 (22)
225-400
3.63 (92)
1.00 (25)
2.72 (69)
1.73 (44)
450-600
3.06 (78)
1.25 (32)
2.03 (52)
0.88 (22)
450-600
3.98 (101)
1.25 (32)
2.96 (75)
1.78 (45)
601-800
3.38 (86)
1.75 (45)
2.22 (56)
0.89 (23)
601-800
4.33 (110)
1.75 (45)
3.17 (81)
1.88 (48)
801-1200
4.00 (102)
2.00 (51)
2.53 (64)
1.08 (27)
Branch circuit fuse dimensions
Class L — in (mm)
KLU, KRP-C_SP, KRP-CL, KTU
J3
J3
J2
J1
J4
All slots and holes
C1
C2
J4
I
801
to
2000 A
A
601
to
800 A
A
J2
J1
2001
to
3000 A
3500
to
4000 A
G
4500
to
6000 A
D
F
B
Amp
range
601-800
801-1200
1350-1600
1800-2000
2001-2500
3000
3500-4000
4500-5000
6000
A
B
8.63 (219)
10.75 (273)
10.75 (273)
10.75 (273)
10.75 (273)
10.75 (273)
10.75 (273)
10.75 (273)
10.75 (273)
C1
2.4 (61)
6.75 (172)
2.4 (61)
6.75 (172)
3.0 (76)
6.75 (172)
3.5 (89)
6.75 (172)
4.8 (122)
6.75 (172)
5.0 (127)
6.75 (172)
5.75 (146) 6.75 (172)
6.25 (159) 6.75 (172)
7.13 (181) 6.75 (172)
C2
5.75 (146)
5.75 (146)
5.75 (146)
5.75 (146)
5.75 (146)
5.75 (146)
5.75 (146)
5.75 (146)
5.75 (146)
D
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
F
2.00 (51)
2.00 (51)
2.38 (60)
2.75 (70)
3.50 (89)
4.00 (102)
4.75 (121)
5.25 (133)
5.75 (146)
G
0.38 (10)
0.38 (10)
0.44 (11)
0.5 (13)
0.75 (19)
0.75 (19)
0.75 (19)
1.0 (25)
1.0 (25)
I
0.63 (16)
0.63 (16)
0.63 (16)
0.63 (16)
0.63 (16)
0.63 (16)
0.63 (16)
0.63 (16)
0.63 (16)
J1
—
—
—
—
1.75 (45)
1.75 (45)
1.75 (45)
1.75 (45)
1.75 (45)
J2
—
—
—
—
1.38 (35)
1.38 (35)
1.38 (35)
1.38 (35)
1.38 (35)
J3
J4
—
—
—
—
0.88 (22)
0.88 (22)
1.63 (41)
1.63 (41)
1.63 (41)
—
—
0.81 (21)
0.81 (21)
0.88 (22)
0.88 (22)
0.88 (22)
Note: KRP-CL (225-600 A) fuses have same dimensions as 601-800 A case size KTU (200-600 A) have same dimensions, except tube 3"
length x 2" diameter (76 x 51 mm); terminal 1-5/8" width x 1-1/4" thick (41 x 32 mm).
1-4
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage, branch circuit fuses — 1
Ratings
100
•
600 Vac (or less)
•
300 Vdc (1/2 to 2-8/10 A and 20-30 A)
•
150 Vdc (3-15 A)
•
Amps 1/2-30 A
•
IR
2011/65/EU
10
•
200 kA RMS Sym.
•
20 kA DC
Agency information
•
Amp rating
Volts
UL Listed Std 248-4, Class CC, Guide JDDZ, File E4273,
CSA Certified, Class 1422-02, File 53787,
RoHS compliant (20-30 A)*, CE
Time in seconds
•
Low voltage,
branch circuit fuses
200
20
25
30
Time-delay, current-limiting, rejection-type fuse — 12 seconds
(minimum) at 200% rated amps. For dimensions, see page 1-3.
3
3-1/2
4
4-1/2
6
8
10
12
15
Time-current characteristics — average melt
1/2
6/10
8/10
1
1-1/4
LP-CC Class CC Low-Peak™ time-delay,
rejection-type fuses
1
* Contact factory for RoHS compliance on other ratings.
Features
•
Inventory consolidation of 13/32" x 1-1/2" supplemental fuses
reduces SKU investment and minimizes potential for misapplying
fuse
•
Selective coordination ratio of 2:1 (within Low-Peak fuse family)
prevents electrical shutdowns from extending beyond the failed
circuit
Typical applications
•
Branch circuit protection
•
Specialized circuits
•
Industrial controls and panels
•
Isolated, in-line fuse holder
Catalog no. (amps)
LP-CC-1/2
LP-CC-1-8 /10
LP-CC-4-1/2
LP-CC-10
LP-CC-6/10
LP-CC-2
LP-CC-5
LP-CC-12
LP-CC-8/10
LP-CC-2-1/4
LP-CC-5-6/10
LP-CC-15
LP-CC-1
LP-CC-2-1/2
LP-CC-6
LP-CC-20
LP-CC-1-1/8
LP-CC-2-8/10
LP-CC-6-1/4
LP-CC-25
LP-CC-1-1/4
LP-CC-3
LP-CC-7
LP-CC-30
LP-CC-1-4/10
LP-CC-3-2/10
LP-CC-7-1/2
LP-CC-1-1/2
LP-CC-3-1/2
LP-CC-8
LP-CC-1-6/10
LP-CC-4
LP-CC-9
0.01
1000
200 kA interrupting rating provides high ratings for control circuit
locations
Current in amps
Current limitation curves
B
30
25
20
15
2-8/10
1-1/4
Amp Rating
•
100
Time-delay coupled with Class CC current-limiting response
provides close sizing on small motor and relay circuits, and
maximum component short-circuit current rating protection
10
•
1
Class CC rejection feature, with appropriate fuse block, prevents
inserting lesser-rated supplementary fuses
Instantaneous Peak Let-Through Current In Amps
•
0.4
0.1
A
Prospective Short-Circuit Current (RMS Sym. Amps)
Recommended holders and blocks for Class CC fuses, see page 1-2.
Data sheet no. 1023
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-5
1 — Low voltage, branch circuit fuses
7-1/2
5
3
1
Time-delay, branch circuit, rejection-type fuse. For superior electrical
protection, Eaton recommends upgrading FNQ-R fuse applications
to Bussmann series Low-Peak LP-CC fuses, see page 1-5. For
dimensions, see page 1-3.
Time-current characteristics — average melt
1/2
FNQ-R Class CC Limitron™ time-delay,
rejection-type fuse
Amp rating
100
Ratings
Volts
•
600 Vac (or less)
•
300 Vdc (15-20 A)
•
32 Vdc (self certified)
•
Amps 1/4-30 A
•
IR
•
200 kA RMS Sym.
•
20 kA DC (15 and 20 A only)
2011/65/EU
10
Agency information
•
UL Listed, Std 248-4, Class CC, Guide JDDZ, File E4273,
CSA Certified, Class 1422-01, File 53787, RoHS compliant, CE
Time in seconds
•
1
Features
•
Class CC rejection feature, with appropriate fuse block, prevents
inserting lesser-rated supplementary fuses
•
Time-delay compatible with inrush characteristic of small control
transformers
•
Current limitation at Class CC levels provides maximum
component short-circuit current rating protection
•
200 kA interrupting rating provides high ratings for control circuit
locations
0.1
Isolated, in-line fuse holders
0.08
0.01
Current in amps
Catalog no. (amps)
FNQ-R-1/4
FNQ-R-1-3/10
FNQ-R-3-2/10
FNQ-R-8
FNQ-R-3/10
FNQ-R-1-4/10
FNQ-R-3-1/2
FNQ-R-9
FNQ-R-4/10
FNQ-R-1-1/2
FNQ-R-4
FNQ-R-10
FNQ-R-1/2
FNQ-R-1-6/10
FNQ-R-4-1/2
FNQ-R-12
FNQ-R-6/10
FNQ-R-1-8/10
FNQ-R-5
FNQ-R-15
FNQ-R-3/4
FNQ-R-2
FNQ-R-5-6/10
FNQ-R-17-1/2
FNQ-R-8/10
FNQ-R-2-1/4
FNQ-R-6
FNQ-R-20
FNQ-R-1
FNQ-R-2-1/2
FNQ-R-6-1/4
FNQ-R-25
FNQ-R-1-1/8
FNQ-R-2-8/10
FNQ-R-7
FNQ-R-30
FNQ-R-1-1/4
FNQ-R-3
FNQ-R-7-1/2
Recommended holders and blocks for Class CC fuses, see page 1-2.
Data sheet no. 1014
1-6
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
200
Industrial controls and panels
•
300
400
500
•
100
Line protection, small control transformers
10
•
1
Typical applications
Low voltage, branch circuit fuses — 1
Time-current characteristics — average melt
Low voltage,
branch circuit fuses
KTK-R Class CC Limitron™ fast-acting,
rejection-type fuse
Fast-acting, branch circuit, rejection-type fuse. For superior electrical
protection, Eaton recommends upgrading KTK-R fuse applications
to Bussmann series Low-Peak LP-CC fuses, see page 1-5. For
dimensions, see page 1-3.
Ratings
•
Volts 600 Vac (or less)
•
Amps 1/10-30 A
•
IR 200 kA RMS Sym.
2011/65/EU
Agency information
•
UL Listed, Std 248-4, Class CC, Guide JDDZ, File E4273,
CSA Certified, File 53787, Class 1422-02, RoHS compliant, CE
Features
•
Class CC rejection feature, with appropriate fuse block, prevents
inserting lesser-rated supplementary fuses
•
Current limitation at Class CC levels provides maximum
component short-circuit current protection
•
200 kA interrupting rating provides high ratings for control circuit
locations
Typical applications
•
Specialized circuits
•
Industrial controls and panels
•
Isolated, in-line fuse holders (street lighting)
Catalog no. (amps)
KTK-R-1/10
KTK-R-6/10
KTK-R-3-1/2
KTK-R-10
KTK-R-1/8
KTK-R-3/4
KTK-R-4
KTK-R-12
KTK-R-2/10
KTK-R-1
KTK-R-5
KTK-R-15
KTK-R-1/4
KTK-R-1-1/2
KTK-R-6
KTK-R-20
KTK-R-3/10
KTK-R-2
KTK-R-7
KTK-R-25
KTK-R-30
KTK-R-4/10
KTK-R-2-1/2
KTK-R-8
KTK-R-1/2
KTK-R-3
KTK-R-9
Recommended holders and blocks for Class CC fuses, see page 1-2.
Data sheet no. 1015
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-7
1 — Low voltage, branch circuit fuses
TCF Class CF Low-Peak time-delay CUBEFuse™
2011/65/EU
The Bussmann series Low-Peak CUBEFuse is a finger-safe UL Class
CF current-limiting, dual-element, time-delay branch circuit fuse and
fuse holder system; 10 seconds minimum operating time at 500%
rated amps. With Class J electrical performance, teh time-delay
CUBEFuse is available in indicating and non-indicating versions, this
finger-safe fuse has a very compact, space-saving size and is easily
applied using the CUBEFuse holder (TCFH_N), UL 98 Compact
Circuit Protector switch (CCP2-_CF) or Compact Circuit Protector
Base (CCP2B up to 100 A) used in the Quik-Spec™ Coordination
Panelboard). For dimensions, see page 1-3.
Features
•
Smallest installed footprint of any UL Class CC, J, or R fuse
solution
•
Easy application using CUBEFuse holders (TCFH_N), UL 98
Compact Circuit Protector (CCP2) switches and Compact Circuit
Protector Base (CCP2B up to 100 A). See data sheet 9007 for
details on the CUBEFuse holder, 10801 for details on the CCP2-_
CF switch and 1161 for the CCP2B.
•
Holders and switches have an amp rating rejection feature to help
prevent overfusing; 30, 60 and 100 A switches and holders will
hold any CUBEFuse up to its rating, 200 and 400 A switches and
200, 225 and 400 A holders will hold any CUBEFuse 110 A and
above up to its rating
•
The indicating version features local easyID™ open fuse
technology for faster troubleshooting and reduced downtime
•
Faster response to damaging faults helps reduce destructive
thermal and magnetic forces
•
True dual-element fuse construction with a minimum 10 seconds
time-delay at 500% of rating
•
Long time-delay minimizes nuisance openings caused by
temporary overloads and transient surges
•
Up to 300 kA interrupting rating safely interrupts virtually any fault
•
Robust cycling and inrush current withstand
•
Low let-through currents under fault conditions
•
Provides Type 2 “No Damage” protection for IEC motor starters
when properly sized
•
Easy selective coordination with any other Bussmann series
Low-Peak Class CC, J, L or RK1 fuse with simple 2:1 amp ratio
between upstream and downstream fuses
Ratings
•
Volts
• 600 Vac
•
•
* Finger-safe status depends on final, installed application, and will require using
accessory shrouds for 110 to 400 A ratings.
Amps
• 6-400 A (indicating)
•
•
300 Vdc
Typical applications
1-400 A (non-indicating)
Interrupting rating
• 300 kA RMS Sym. (Up to 100 A UL)
•
Electrical panelboards
•
Machinery disconnects
Industrial controls and panels
Required finger-safe systems
•
200 kA RMS Sym. (110 to 400 A UL)
•
•
200 kA RMS Sym. (Up to 100 A CSA)
•
•
100 kA DC (Up to 400 A UL and up to 100 A CSA)
Watts loss at rated current
Fuse amps
Catalog numbers (amps)
Indicating CUBEFuse
Watts
TCF6
TCF35
TCF90
TCF225
30
3.99
TCF10
TCF40
TCF100
TCF250
60
6.23
TCF15
TCF45
TCF110
TCF300
100
9.51
TCF17-1/2
TCF50
TCF125
TCF350
200
18.6
TCF20
TCF60
TCF150
TCF400
225
17.6
TCF25
TCF70
TCF175
400
35.2
TCF30
TCF80
TCF200
Agency information
Non-Indicating CUBEFuse
TCF1RN
TCF25RN
TCF70RN
TCF175RN
•
UL Listed Class CF fuse: Guide JDDZ, File E4273 (up to 400 A)
•
CSA® Certified fuse: Class 1422-02, File 053787_C_000 (up to 100 A)
TCF3RN
TCF30RN
TCF80RN
TCF200RN
•
CE (100 A and below)
TCF6RN
TCF35RN
TCF90RN
TCF225RN
•
RoHS compliant
TCF10RN
TCF40RN
TCF100RN
TCF250RN
Operating and storage temperature range
•
-40 to 80°C (-40°F to 176°F)
TCF15RN
TCF45RN
TCF110RN
TCF300RN
TCF17-1/2RN
TCF50RN
TCF125RN
TCF350RN
TCF20RN
TCF60RN
TCF150RN
TCF400RN
Recommended holders for Class CF fuses, see page 1-12.
Data sheet no. 9000 (fuses) and 9007 (holders)
1-8
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage, branch circuit fuses — 1
Low voltage,
branch circuit fuses
400A
1000
200A
225A
250A
110 to 400 A time-current characteristics — average melt
110A
Up to 100 A time-current characteristics — average melt
TIME IN SECONDS
100
10
1
100
1,000
0.01
10,000
0.1
CURRENT IN AMPS
110 to 400 A current let-through curves
B
400A
250A
225A
200A
110A
10,000
1,000
,
10,000
100
1,000
A
100
INSTANTANEOUS PEAK LET-THRU CURRENT IN AMPS
100,000
PROSPECTIVE SHORT CIRCUIT CURRENT
SYMMETRICAL RMS AMPS
100,000
Up to 100 A current let-through curves
Data sheet no. 9000 (fuses) and 9007 (holders)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-9
1 — Low voltage, branch circuit fuses
FCF Class CF fast-acting CUBEFuse
Amp rating
100
30
40
50
60
20
15
6
10
1000
3
Finger-safe, non-indicating, fast-acting CUBEFuse for UPS and critical
applications with a 4 minute maximum clearing time at 200%, rated
current for 1 to 30 A fuse, 6 minute maximum clearing time at
200%, rated current for 35 to 60 A fuse. For dimensions, see page
1-3.
1
Time-current characteristics — average melt
Ratings
Volts 600 Vac/dc (or less)
•
Amps 1-100 A
•
IR
100
•
300 kA RMS Sym. (UL up to 60 A)
•
200 kA RMS Sym.
(CSA all ratings and UL 70 to 100 A)
•
2011/65/EU
Time in seconds
•
50 kA DC
Agency information
•
UL Listed, Guide JDDZ, File E4273, CSA Certified, Class 1422- 02,
File 53787, RoHS compliant, CE
10
1
Features
Class CF meets Class J fast-acting electrical performance
requirements
•
True fast-acting for faster response to damaging faults to help
reduce destructive thermal and magnetic forces
•
High interrupting rating to safely interrupt faults up to 300 kA
•
No venting of arc or molten metal and gases during opening
•
Low let-through currents under fault conditions
Current in amps
Catalog no. (amps)
Current limitation curves
FCF45RN
FCF90RN
FCF100RN
FCF3RN
FCF25RN
FCF50RN
FCF6RN
FCF30RN
FCF60RN
FCF10RN
FCF35RN
FCF70RN
FCF15RN
FCF40RN
FCF80RN
Recommended holders for Class CF fuses, see page 1-12.
B
100,000
100A
60A
10,000
30A
15A
1000
A
Prospective short-circuit current (Symmetrical RMS Amps)
Data sheet no. 2147 (fuses) and 9007 (holders)
1-10
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
100,000
10,000
1000
100
100
300,000
FCF20RN
Instantaneous peak let-through current in amps
FCF1RN
0.01
10,000
•
0.1
1000
Smallest installed footprint of any class fuse including Class CC, J,
and RK
100
•
10
The world's first finger-safe power fast-acting fuse system
1
•
WCF fast-acting 690 V wind power CUBEFuse
Operating and storage temperature range
Finger-safe, non-indicating, fast-acting CUBEFuse for wind power
generation systems with a maximum clearing time at 200% rated
current: 4 minutes for 1 to 30 amp fuses, 6 minutes for 35 to 60
amp fuses, 8 minutes for 70 to 100 amp fuses. For dimensions, see
page 1-3.
-40°C to 90°C
Ratings
•
50 kA AC (1-60 A)
•
30 kA AC (70-100 A)
Agency information
•
Amp rating
100
30
40
50
60
1000
20
2011/65/EU
15
IR
6
Amps 1-100 A
•
10
•
Time-current characteristic curves — average melt
3
Volts 690 Vac
The wind CUBEFuse must be mounted in the 690 V WCF holders
that are rated for 690 volts. Not to be installed in the CCP2-CF or
CCP2B disconnect switches. See page 1-12.
1
•
Mounting
100
UL Recognized, Guide JFHR2, File E56412, cURus Component
Certified C22.2, RoHS compliant, CE
Features
•
Minimize design time, operating outage time and replacement
cost with fuses qualified in excessively changing environmental
conditions
•
Simplify compatibility with readily available industry standard
holders
•
Temperature derating — Designed to maximize rated capacity in
elevated environmental temperatures
•
Overload protection — Proven to clear faults faster than the UL
requirement
•
Power loss — Minimal energy consumption leading to increased
efficiency
0.1
0.01
Current in amps
Typical application
Current limitation curves
WCF60RN
WCF100RN
WCF3RN
WCF20RN
WCF40RN
WCF70RN
WCF100RN
WCF6RN
WCF25RN
WCF45RN
WCF80RN
WCF10RN
WCF30RN
WCF50RN
WCF90RN
Recommended holders for WCF fuses, see page 1-12.
Watts loss at rated current
Amps
Fuse catalog no.
Watts
15
WCF15RN
3.48
30
WCF30RN
5.45
60
WCF60RN
7.27
100
WCF100RN
11.5
100A
60A
40A 50A
30A
15A
10,000
1000
A
100
Prospective short-circuit current (Symmetrical RMS Amps)
300,000
WCF35RN
100,000
WCF15RN
10,000
WCF1RN
1000
Catalog no. (amps)
B
100,000
100
Protecting wind system transformers, pitch and speed controls,
and turbine HVAC and lighting
Instantaneous peak let-through current in amps
•
1
10,000
Maximize return on investment with fuses proven to withstand
harsh temperatures
1,000
•
100
Minimize chances of equipment failure and personnel injury when
using full range fuses having the industry's fastest response time
to low-magnitude faults
10
•
10
Time in seconds
Maximize uptime and reliability using fuses designed and listed to
UL 248-1
1
•
Data sheet no. 9009 (fuses) and 9007 (holders)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-11
Low voltage,
branch circuit fuses
Low voltage, branch circuit fuses — 1
1 — Low voltage, branch circuit fuses
CUBEFuse™ finger-safe fuse holders
Catalog no.
Max holder amps
Fuse amp range
600 V UL Listed
TCFH30N
2011/65/EU
30
1-30
TCFH60N
60
1-60
TCFH100N
100
1-100
TCFH200N
200
110-200
TCFH225N
225
110-225
TCFH400N
400
110-400
30
1-30
690 V UL Recognized
TCFH30NW
The Bussmann series CUBEFuse holder is a finger-safe modular
system of single-pole 30, 60, 100, 200, 225 and 400 amp holders. All
holders dovetailed together to create the desired number of poles
for the application, including mixed amp ratings between the 30, 60
and 100 amp holders.
The 200, 225 and 400 amp holders require installing lugs to make
conductor connections. These are listed on page 1-14.
The CUBEFuse holder is available as the 600 V UL Listed version
utilizing the time-delay Low-Peak™ CUBEFuse (TCF up to 400 A) or
fast-acting CUBEFuse (FCF up to 100 A), or the 690 V UL Recognized
version utilizing the fast-acting wind CUBEFuse (WCF up to 100 A).
Ratings
•
Volts
• 600 Vac / 300 Vdc (UL Listed)
•
690 Vac (UL Recognized up to 100 A)
•
Amps
• 30, 60, 100, 200, 225, 400 A
•
SCCR
• 300 kA RMS Sym. (30, 60, 100 A UL Listed)
•
200 kA RMS Sym. (200, 225, 400 A UL Listed)
•
200 kA RMS Sym. (CSA® Certified 100 A and below)
•
100 kA DC (UL Listed and CSA Certified 100 A and below)
•
50 kA RMS Sym. (UL Recognized)
TCFH60NW
60
1-60
TCFH100NW
100
1-100
Features
•
Finger-safe construction for enhanced safety*
•
Amp rating rejection helps prevent overfusing by rejecting higher
fuse amp ratings
•
Smallest installed fuse and holder footprint of any Class J or R
installation
•
All holders dovetail together to create the required number of
poles, mixed 30, 60 and 100 A holders dovetail together
•
30, 60 and 100 A holders have dual wire rated box lug terminals
for wiring ease
•
200, 225 and 400 A holders available with a variety of lugs and
terminal shrouds for application flexibility
•
Up to 300 kA SCCR withstands high fault currents
* 200, 225 and 400 A holders require installed shrouds.
30, 60 and 100 A CUBEFuse holder fuse applications
All 30, 60 and 100 A
CUBEFuse holders dovetail
together to create the desired
number of poles. Each holder
accepts CUBEFuse amp
ratings up to its rating. E.g.,
the 60 amp holder will accept
a CUBEFuse from 1 to 60 A.
Agency information
•
600 V UL Listed, Guide IZLT, File E14853
•
690 V UL Recognized, Guide IZLT2, File E14853
•
CSA Certified, Class 6225-01, File 47235, cURus component
Certified (30, 60 and 100 A holders)
•
CE (100 A and below)
•
RoHS compliant
Mounting
Holder
catalog no.
Volts
TCFH30N
•
35 mm DIN-Rail/panel (Up to 100 A)
TCFH60N
•
Panel mount (200 to 400 A)
TCFH100N
Operating and storage temperature range
•
CUBEFuse type and amp range
-40°C to 80°C (-40°F to 176°F)
600
TCF and TCF_RN
FCF_RN
1-30
1-30
1-60
1-60
1-100
1-100
TCFH30NW
TCFH60NW
690
—
—
1-60
1-100
Data sheet no. 9007
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
—
1-30
TCFH100NW
1-12
WCF_RN
Eaton.com/bussmannseries
Low voltage, branch circuit fuses — 1
Conductor ratings and torque for 30, 60 and 100 A holders
Dimensions — in (mm)
Terminal
wire
rating
Low voltage,
branch circuit fuses
Ratings are for 75°C Cu AWG solid/stranded conductors. Torque is in
N•m (lb-in).
Holder catalog no.
TCFH30N /
TCFH30NW
TCFH60N /
TCFH60NW
TCFH100N /
TCFH100NW
Single
8-10; 2.8 (25),
12-18; 2.6 (20)
10-14; 2.6 (20),
4-8; 3.9 (35)
10-18; 2.6 (20)**,
1-8; 4.5 (40)†
Dual
10-18; 2.8 (25)*
10-18; 2.6 (20),
6-8; 3.9 (35)
6; 5.1 (45)†
* 10-18 AWG stranded, 14-18 AWG solid
** Solid and stranded
† Stranded
Recommended Bussmann series fuses
Type
Amp range
Data sheet
600 volt UL Listed
Time-delay indicating Low-Peak™
6-100 A
Time-delay non-indicating Low-Peak
1-100 A
Fast-acting non-indicating
1-100 A
2147
1-100 A
9009
9000
690 volt UL Recognized
Fast-acting wind power
Max
height
with
Amps
H
I
J
K
L
M
fuse
30
2.3 (58) 0.76 (19) 1.36 (34) 0.15 (4)
—
—
2.36 (60)
60
2.6 (66) 1.03 (26) 1.60 (41) 0.17 (4)
—
—
2.73 (69)
100
2.91 (74) 1.05 (27) 2.01 (51) 0.15 (4) 0.80 (20) 2.51 (64) 3.27 (83)
Data sheet no. 9007
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-13
1 — Low voltage, branch circuit fuses
200, 225 and 400 A CUBEFuse holder fuse applications
Terminal shroud
Holder catalog no.
Volts
TCFH200N
CUBEFuse amp range
110-200
TCFH225N
600 Vac/300 Vdc
TCFH400N
110-225
110-400*
* Achieving 400 A continuous current requires three ganged holders
and installed lug catalog number CCP2-L4B-3 to permit the necessary
copper conductor size.
Available lug kits
For complete installation, the 200, 225 and 400 A CUBEFuse holders
require lugs. The table below contains the information necessary for
ordering the desired lug kit for the application.
Accessories
Catalog no.
CCP2-TS2-3
CCP2-PB2
Holder
amps
200/225
CCP2-CWK2
CCP2-TS6-3
CCP2-PB6
400
Description
3-pole terminal shroud
Phase barriers (pack of 2)
1/4” QC terminals. Use with CCP2-L2-1A,
CCP2-MW2-3 and CCP2-MW2-6 lugs (pack of 12)
3-pole terminal shroud
Phase barriers (pack of 2)
Lug
All 200, 225 and 400 amp holders require installing lugs. Only three
ganged holders can accept terminal shrouds. See table below.
Recommended Bussmann series fuses
Type
Time-delay indicating Low-Peak
Time-delay non-indicating Low-Peak
Amp range
Data sheet
110-400 A
9000
Available lugs, conductor ratings and terminal torques
Catalog no.
Description
200/225 A holders
CCP2-L2-1
Stainless steel lug
CCP2-L2-1A
Aluminum lug*
CCP2-MW2-3 3-port multi-wire terminal with shroud*†
CCP2-MW2-6 6-port multi-wire terminal with shroud*†
Lugs per
cat. no.
Wire range
AWG (mm2)
Wire type/
temp.
Conductor
torque N•m
(lb-in)
Lug mounting screw
torque N•m (lb-in)
1
1
3
3
350-4 (185-25)
350-4 (185-25)
2-14 (35-2.5)
6-14 (16-2.5)
Cu 75°C
Cu/Al 75°C
Cu/Al 75°C
Cu/Al 75°C
20.3 (180)
28.2 (250)
7.9 (70)
2.8 (25)
0.9 (8)
13.5 (120)
10.8 (95)
10.8 (95)
* These lugs also accept 1/4” quick connect control wire terminals. Order catalog number CCP2-CWK2 (package of 12 terminals).
400 A holders
CCP2-L4-1
CCP2-L4-1A
CCP2-L4B-3
CCP2-L4B-3A
CCP2-L6-3
CCP2-L6-3A
Stainless steel lug
Aluminum lug
Stainless steel lug kit with shroud†
Aluminum lug kit with shroud†
2-port stainless steel lug kit with shroud
2-port aluminum lug kit with shroud
1
1
3
3
3
3
500-3 (240-35)
500-3 (240-35)
750-500 (400-240)
750-500 (400-240)
(2) 500-2 (240-35)
(2) 500-2 (240-35)
Cu 75°C
Cu/Al 75°C
Cu 75°C
Cu/Al 75°C
Cu 75°C
Cu/Al 75°C
42.0 (375)
42.0 (375)
57.0 (500)
62.0 (550)
42.0 (375)
42.0 (375)
10-14 = 3.9 (35)
CCP2-MW6-6
6-port multi-wire terminal with shroud†
3
1/0-14 (50-2.5)
Cu/Al 75°C
8 = 4.5 (40)
4-6 = 5.0 (45
1/0-2 = 5.6 (50)
† This is a lug kit with three lugs and a shroud for installation on three ganged CUBEFuse holders.
Data sheet no. 9007
1-14
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
22.0 (200)
Low voltage, branch circuit fuses — 1
Dimensions — mm (in)
Low voltage,
branch circuit fuses
200/225 A holder
87.6
(3.4)
40.7
(1.6)
104.8
4.1)
25.3
(1.0)
108.1
(4.2)
34.9
(1.4)
2xØ 4.2 (0.2)
282.6
(11.1)
3-pole ganged 200 A holder with installed shroud
23.9
(0.9)
124.5
(4.9)
400 A holder
99.6
(3.9)
27.5
(1.1)
139.2
(5.5)
43.66
(1.7)
2xØ 4.2 (0.2)
33.4
(1.3)
167.7
(6.6)
276.0
(10.9)
3-pole ganged 400 A holder with installed shroud
Data sheet no. 9007
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-15
1 — Low voltage, branch circuit fuses
Ordering a complete 200/225 A holder installation
For a complete installation, select from the following required and optional components, and accessories.
Catalog no.
Holders
Amps
TCFH200N
Poles
200
1
Order required quantity for installation
Required
TCFH225N
225
And
Lug kits
Description
CCP2-L2-1
Stainless steel lug, 75° Cu only, 350 kcmil-4, 1 per pack
CCP2-L2-1A
Aluminum lug, 75°C Cu/Al, 350 kcmil-4, 1 per pack
CCP2-MW2-3
3-port multi-wire lug, 75°C Cu/Al, 2-14, 3 per pack, includes terminal shroud
CCP2-MW2-6
6-port multi-wire lug, 75°C Cu/Al, 6-14, 3 per pack, includes terminal shroud
And
Accessories
Terminal shrouds
Description
CCP2-TS2-3
3-pole terminal shroud with phase shields, 1 per pack
Phase barriers
Description
CCP2-PB2
Phase barriers, 2 per pack
And
Control terminals Description
CCP2-CWK2
1/4” quick-connect control wire terminals - mounts on installed lug (cannot be used
with lug CCP2-L2-3), 12 per pack
Data sheet no. 9007
1-16
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage, branch circuit fuses — 1
Ordering a complete 400 A holder installation
Low voltage,
branch circuit fuses
For a complete installation, select from the following required and optional components, and accessories.
Catalog no.
Holder
Amps
Required
TCFH400N
Poles
1
400
Order required quantity for installation
And
Lug kits
Description
CCP2-L4-1
Stainless steel lug, 75° Cu only, 500 kcmil-3, 1 per pack
CCP2-L4-1A
Aluminum lug, 75° Cu only, 500 kcmil-3, 1 per pack
CCP2-L4B-3
Stainless steel lug, 75° Cu only, 750-500 kcmil, 3 per pack, includes terminal shroud
CCP2-L4B-3A
Aluminum lug, 75°C Cu/Al, 750-500 kcmil, 3 per pack, includes terminal shroud
CCP2-L6-3
2-port stainless steel lug, 75° Cu only, 500 kcmil-2, 3 per pack, includes terminal shroud
CCP2-L6-3A
2-port aluminum lug, 75°C Cu/Al, 500 kcmil-2, 3 per pack, includes terminal shroud
CCP2-MW6-6
6-port multi-wire lug, 75°C Cu/Al, 1/0-14, 3 per pack, includes terminal shroud
Accessories
And
Terminal
shrouds
Description
CCP2-TS6-3
3-pole terminal shroud with phase shields, 1 per pack
Phase barriers
Description
CCP2-PB6
Phase barriers, 2 per pack
Data sheet no. 9007
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-17
1 — Low voltage, branch circuit fuses
SC Class G general purpose fuses
Time-current characteristics — average melt
Fast-acting (1/2-6 A) and time-delay (7-60 A) Class G fuses. SC fuses
are size rejecting measuring 13/32" in diameter by various lengths
associated with their amp rating ranging from 1-5/16" to 2-1/4". This
feature helps prevent overfusing. See the catalog numbers table for
length by amp rating.
Ratings
•
Volts
•
600 Vac (1/2-20 A)
•
480 Vac (25-60 A)
•
170 Vdc (1/2-20 A)
•
300 Vdc (25-60 A)
•
Amps 1/2-60 A
•
IR
•
100 kA RMS Sym.
•
10 kA DC
2011/65/EU
Agency information
•
UL Listed Std 248-5, Class G, Guide JDDZ, File E4273,
CSA Certified, Class 1422-01, File 53787, RoHS compliant, CE
Features
Rejection feature with variations in length helps prevent overfusing
Typical applications
•
Fusible branch circuit panelboards
•
HVAC branch circuit protection
Catalog no. (amps) and length
1-5/16"
1-13/32"
1-5/8"
2-1/4"
SC-1/2
SC-20
SC-25
SC-35
SC-30
SC-40
SC-1
SC-1-1/2
SC-45
SC-2
SC-50
SC-2-1/2
SC-60
SC-3
SC-4
SC-5
Current limitation curves
B
100,000
60A
30A
20A
15A
1000
A
100
Prospective short-circuit current (Symmetrical RMS Amps)
A-B = Asymmetrical available peak (2.3 x Sym. RMS Amps)
SC-6
SC-7
SC-8
SC-10
SC-12
SC-15
Recommended holders and blocks for Class G fuses, see page 1-2.
Data sheet no. 1024
1-18
100,000
•
10,000
100 kA interrupting rating provides cost-effective branch circuit
fusing for systems with high short-circuit current levels
1000
•
100
Class G current limiting for component and branch circuit
protection
Instantaneous peak let-through current in amps
•
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage, branch circuit fuses — 1
600
400
125
200
250
60
80
100
30
15
10
6
3
300
Amp rating
200
100
Ratings
Volts
•
600 Vac (or less)
•
300 Vdc (or less)*
•
Amps 1-600 A
•
IR
10
2011/65/EU
•
300 kA RMS Sym.
•
100 kA DC
Time in seconds
•
* Does not apply to indicating versions.
1
Agency information
•
UL Listed, Guide JDDZ, File E4273, CSA Certified Class J per
CSA 22.2 No 248.8, Class 1422-02, File 53787, RoHS compliant,
CE
0.1
Features
•
Series combination ratings with branch circuit breakers allows
broad range of coverage, independent of breaker manufacturer
10,000
100
Selective coordination ratio of 2:1 (within Low-Peak fuse family)
prevents electrical shutdowns from extending beyond the failed
circuit
1000
0.01
10
•
Separate overload and short-circuit elements provide time delay for
sizing of high inrush loads linked with Class J current limitation
1
•
Current in amps
Current limitation curves
B
100,000
Typical applications
LPJ-1SP
LPJ-4-1/2SP
LPJ-25SP*
LPJ-125SP*
LPJ-1-1/4SP
LPJ-5SP
LPJ-30SP*
LPJ-150SP*
LPJ-1-6/10SP
LPJ-5-6/10SP
LPJ-35SP*
LPJ-175SP*
LPJ-1-8/10SP
LPJ-6SP*
LPJ-40SP*
LPJ-200SP*
LPJ-2SP
LPJ-7SP*
LPJ-45SP*
LPJ-225SP*
LPJ-2-1/4SP
LPJ-8SP*
LPJ-50SP*
LPJ-250SP*
LPJ-2-1/2SP
LPJ-9SP*
LPJ-60SP*
LPJ-300SP*
LPJ-2-8/10SP
LPJ-10SP*
LPJ-70SP*
LPJ-350SP*
LPJ-3SP
LPJ-12SP*
LPJ-80SP*
LPJ-400SP*
LPJ-3-2/10SP
LPJ-15SP*
LPJ-90SP*
LPJ-450SP*
LPJ-3-1/2SP
LPJ-17-1/2SP*
LPJ-100SP*
LPJ-500SP*
LPJ-4SP
LPJ-20SP*
LPJ-110SP*
LPJ-600SP*
1000
A
100
300,000
Catalog no. (amps)
30A
15A
200,000
Industrial control
100,000
•
10,000
10,000
Machinery disconnects
1000
Branch circuit breaker panelboard mains
•
200A
100A
60A
100
Power panelboards
•
Instantaneous peak let-through current in amps
•
600A
400A
Prospective short-circuit current (Symmetrical RMS Amps)
*Available with optional permanent replace fuse indication To order, place "I" at end
of catalog number Example: LPJ-6SPI.
Available with silver plated terminals Add SP/ in front of catalog number.
Recommended holders and blocks for Class J fuses, see page 1-2.
Data sheet no. 1006 (0-60 A) and 1007 (70-600 A)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-19
Low voltage,
branch circuit fuses
Dual-element, time-delay Class J fuse; 10 seconds (minimum) at
500% rated amps, available with optional indication on select ratings
(see catalog numbers table). For dimensions, see page 1-3.
Time-current characteristics — average melt
1
LPJ_SP Class J Low-Peak dual-element, timedelay fuses
1 — Low voltage, branch circuit fuses
600
400
200
300
100
Fast-acting, Class J current-limiting fuse. For superior electrical
protection, Eaton recommends upgrading JKS fuse applications
to Bussmann series Low-Peak LPJ fuses See page 1-19. For
dimensions, see page 1-3.
60
Time-current characteristics — average melt
30
JKS Class J Limitron™ fast-acting fuses
Amp rating
JKS
100
Ratings
•
Volts 600 Vac (or less)
•
Amps 1-600 A
•
IR 200 kA RMS Sym.
10
Agency information
600 Vac, UL Listed, Std. 248-8, Class J,
Guide JDDZ, File E4273, CSA Certified,
Class 1422-02, File 53787, CE
Time in seconds
•
Features
•
Current limitation for non-inductive circuits provides Class J
current-limiting response to maximum ground fault and shortcircuit conditions
•
200 kA interrupting rating provides protection at all circuit locations
•
Economical circuit protection for high-fault current circuits
1
0.1
40
JKS-70
JKS-225
JKS-2
JKS-20
JKS-80
JKS-250
JKS-3
JKS-25
JKS-90
JKS-300
JKS-4
JKS-30
JKS-100
JKS-350
JKS-5
JKS-35
JKS-110
JKS-400
JKS-6
JKS-40
JKS-125
JKS-450
JKS-8
JKS-45
JKS-150
JKS-500
JKS-10
JKS-50
JKS-175
JKS-600
JKS-12
JKS-60
JKS-200
Recommended holders and blocks for JKS Class J fuses, see page
1-2.
Current in amps
Current limitation curves
B
400,000
100,000
600A
400A
200A
100A
60A
10,000
30A
A
1000
1000
200,000
JKS-15
Instantaneous peak let-through current in amps
JKS-1
10,000
0.01
Catalog no. (amps)
100,000
Machinery disconnects
1000
Power panelboards
•
10,000
•
100
Typical applications
Prospective short-circuit current (Symmetrical RMS Amps)
A-B = Asymmetrical available peak (2.3 x Sym. RMS Amps)
Data sheet no. 1026 (1-60 A) and 1027 (70-600 A)
1-20
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage, branch circuit fuses — 1
Catalog no. (amps)
250 V NON
NON-1/8
NON-5
NON-40
NON-175
General purpose, Class K5 and H non-current-limiting fuse 250 V
NON and 600 V NOS fuses. For superior electrical protection, Eaton
recommends upgrading NON (250 Vac) and NOS (600 Vac) fuse
applications to Bussmann series Low-Peak LPN-RK (250 Vac) and
LPS-RK (600 Vac) fuses, see pages 1-24 to 1-26. For dimensions,
see page 1-3.
NON-1
NON-8
NON-65
NON-300
Ratings
NON-1-1/4
NON-9
NON-70
NON-350
•
Volts
•
NON
− 250 Vac
− 125 Vdc (0-100 A)
•
NOS
− 600 Vac
•
Amps 1/8-600 A
•
IR
NON-7
NON-60
NON-250
NON-1-1/2
NON-10
NON-75
NON-400
NON-1-6/10
NON-12
NON-80
NON-450
NON-2
NON-15
NON-90
NON-500
NON-2-1/2
NON-20
NON-100
NON-600
NON-3
NON-25
NON-110
NON-3-2/10
NON-30
NON-125
NON-4
NON-35
NON-150
NOS-12
NOS-70
NOS-200
NOS-2
NOS-15
NOS-75
NOS-225
•
10 kA RMS Sym. (NON and NOS 65-600 A)
NOS-3
NOS-20
NOS-80
NOS-250
•
50 kA @ 125 Vdc (NON 0-60 A)
NOS-4
NOS-25
NOS-90
NOS-300
•
10 kA @ 125 Vdc (NON 65-100 A)
NOS-5
NOS-30
NOS-100
NOS-350
UL Listed
250 V Class K5 (0-60 A), Std 248-9, Class H (65-600 A),
Std 248-6, (125 Vac, NON 0-100 A)
600 V Class K5 (0-60 A), Std 248-9, Class H (70-600 A),
Std 248-6, Guide JDDZ, File E4273
CSA Certified
•
250 V (0-12, 65-600 A)†
•
600 V (0-600 A), Class 1421-01, File 53787
CE
Features
Basic overcurrent protection.
Typical applications
•
NON-8/10
NOS-1
† For CSA Certified 15-60 A ratings, see PON in Section 5, page 2.
•
NON-200
NON-225
50 kA RMS Sym. (NON and NOS 0-60 A)
•
•
NON-45
NON-50
•
•
•
NON-6
NON-6-1/4
600 V NOS
Agency information
•
NON-1/2
NON-3/4
Light duty circuit locations
NOS-6
NOS-35
NOS-110
NOS-400
NOS-7
NOS-40
NOS-125
NOS-450
NOS-8
NOS-45
NOS-150
NOS-500
NOS-9
NOS-50
NOS-175
NOS-600
NOS-10
NOS-60
Recommended fuse reducers
250 V
Fuse
amps
600 V
Clip amp
size
Catalog
no. (pair)
Fuse
amps
Clip amp
size
Catalog
no. (pair)
30
60
NO.263
30
60
NO.663
30
100
NO.213
30
100
NO.216
60
100
NO.216
60
100
NO.616
60
200
NO.226
60
200
NO.626
100
200
NO.2621
100
200
NO.2621
100
400
NO.2641
100
400
NO.2641
200
400
NO.2642
200
400
NO.2642
100
600
NO.2661
100
600
NO.2661
200
600
NO.2662
200
600
NO.2662
400
600
NO.2664
400
600
NO.2664
Recommended blocks for Class K5 and H fuses, see page 1-2.
Data sheet no. 1030
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-21
Low voltage,
branch circuit fuses
NON and NOS Class K5/H general purpose onetime fuses
1 — Low voltage, branch circuit fuses
Ratings
Volts
•
600 Vac (or less)
•
300 Vdc (601-2000 A, 3000 A)
•
Amps 601-6000 A
•
IR
2011/65/EU
10
•
300 kA RMS Sym.
•
100 kA DC
Agency information
•
Amp rating
100
Time in seconds
•
4000
5000
6000
300
1600
2000
2500
3000
Time-delay Class L fuses — 4 seconds (minimum) at 500% rated
amps. Use KRP-CL for current ratings under 601 A. For dimensions,
see page 1-4.
1200
Time-current characteristics — average melt
800
KRP-C_SP Class L Low-Peak time-delay fuses
UL Listed 248-10, Guide JFHR,
File E56412, CSA Certified, Class
1422-02, File 53787, Class L per
CSA C22.2, No 248.10, RoHS
compliant, CE
1
Features
•
Interrupting rating of 300 kA RMS symmetrical provides adequate
ratings without obsolescence for all electrical systems, big or
small
Quality construction, using high-grade materials, provides lower
watts loss and operating temperatures with superior arc quenching
during current-limiting action
Typical applications
•
Large machinery disconnects
Catalog no. (amps)
KRP-C-601SP
KRP-C-1000SP
KRP-C-1800SP
KRP-C-3500SP
KRP-C-650SP
KRP-C-1100SP
KRP-C-1900SP
KRP-C-4000SP
KRP-C-700SP
KRP-C-1200SP
KRP-C-2000SP
KRP-C-4500SP
KRP-C-750SP
KRP-C-1350SP
KRP-C-2001SP
KRP-C-5000SP
KRP-C-800SP
KRP-C-1400SP
KRP-C-2400SP
KRP-C-6000SP
KRP-C-801SP
KRP-C-1500SP
KRP-C-2500SP
KRP-C-900SP
KRP-C-1600SP
KRP-C-3000SP
Recommended blocks for Class L fuses, see page 1-2.
6000A
5000A
4000A
3000A
2500A
2000A
1600A
1200A
800A
601A
100,000
10,000
A
1000
1000
300,000
Power panelboards
B
200,000
•
1,000,000
100,000
Large distribution switchboards
Current limitation curves
10,000
•
Current in amps
Instantaneous peak let-through current in amps
•
0.01
200,000
Selective coordination ratio of 2:1 (within Low-Peak fuse family)
prevents electrical shutdowns from extending beyond the failed
circuit
100,000
•
0.1
10,000
Time-delay of 4 seconds at 5 times rating allows closer sizing on
large motor loads combined with Class L current limitation
1000
•
Prospective short-circuit current (Symmetrical RMS Amps)
Data sheet no. 1008(601-2000 A) and 1009 (2001-6000 A)
1-22
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
KRP-CL current-limiting, time-delay fuses
KTU Class L Limitron fast-acting fuses
Current-limiting, time-delay fuse with Class L dimensions for the
601-800 A case size. For dimensions, see page 1-4.
Fast-acting, Class L fuses. For superior electrical protection, Eaton
recommends upgrading KTU fuse applications to Bussmann series
Low-Peak KRP-C fuses, see page 1-22. For dimensions, see page
1-4.
Ratings
•
Volts 600 Vac (or less)
Ratings
•
Amps 225-600 A
•
Volts 600 Vac (or less)
•
IR 200 kA RMS Sym.
•
Amps 601-6000 A
•
IR 200 kA RMS Sym.
2011/65/EU
Agency information
•
Agency information
RoHS compliant
Features
•
•
2011/65/EU
•
Time-delay of 4 seconds at 5
times rating allows closer sizing
inductive loads coupled with
an equivalent Class L current
limitation
UL Listed, Std 248-10, Class L, Guide JDDZ,
File E4273, CSA Certified, Class 1422-02,
File 53787, RoHS compliant, CE
Features
601 to 800 A Class L case size permits applying circuit protection
from 225 to 600 A for downsize fusing of 800 amp Class L fused
switches
•
200 kA interrupting rating provides protection at all circuit locations
•
Economical protection for high-fault current circuits
•
Quality construction using high-grade materials provides lower
watts loss and operating temperatures with superior arc quenching
during current-limiting action
Typical applications
Typical applications
•
Large distribution switchboards
•
Power panelboards
•
Large distribution switchboards
•
Machinery disconnects
•
Power panelboards
Catalog no. (amps)
Catalog no. (amps)
KRP-CL-225
KRP-CL-300
KRP-CL-400
KRP-CL-500
KTU-601
KTU-850
KTU-1500
KTU-2500
KRP-CL-250
KRP-CL-350
KRP-CL-450
KRP-CL-600
KTU-650
KTU-900
KTU-1600
KTU-3000
KTU-700
KTU-1000
KTU-1800
KTU-3500
KTU-750
KTU-1100
KTU-2000
KTU-4000
KTU-800
KTU-1200
KTU-2001
KTU-5000
KTU-801
KTU-1400
KTU-2400
KTU-6000
Recommended blocks for Class L fuses, see page 1-2.
Recommended blocks for Class L fuses, see page 1-2.
Data sheet no. 1016
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 1010
Eaton.com/bussmannseries
1-23
Low voltage,
branch circuit fuses
Low voltage, branch circuit fuses — 1
1 — Low voltage, branch circuit fuses
KLU Class Limitron time-delay fuses
Time-delay, Class L fuses - 5 seconds (minimum) at 500% rated
amps. For superior electrical protection, Eaton recommends
upgrading KLU fuse applications to Bussmann series Low-Peak
KRP-C fuses, see page 1-22. Use KRP-CL for current ratings under 601
A. For dimensions, see page 1-4.
Ratings
LPN-RK_SP (250 V) and LPS-RK_SP (600 V) Class
RK1 Low-Peak dual-element, time-delay fuses
Current-limiting, dual-element, time-delay Class RK1 fuses; 10
seconds (minimum) at 500% rated amps (8 seconds for 0-30 A
sizes). Available with optional indication on select ratings (see
catalog numbers table). For dimensions, see page 1-3.
Ratings
•
Volts 600 Vac (or less)
•
Amps 601-4000 A
•
IR 200 kA RMS Sym.
2011/65/EU
•
Volts
•
LPN-RK
− 250 Vac (or less)
− 125 Vdc* (0-60 A)
Agency information
•
− 250 Vdc* (70-600 A)
UL Listed, Std 248-10, Class L, Guide JDDZ,
File E4273, CSA Certified, CSA Class 1422-02,
File 53787, RoHS compliant, CE
•
− 300 Vdc*
Features
•
200 kA interrupting rating provides protection at all circuit locations
•
Economical protection for high-fault current circuits
•
Amps 1/10-600 A
•
IR
Typical applications
•
Large distribution switchboards
•
Power panelboards
•
Large machinery disconnects
LPS-RK
− 600 Vac (or less)
•
300 kA RMS Sym.
•
100 kA DC
* Does not apply to indicating versions.
Agency information
•
Catalog no. (amps)
KLU-601
KLU-1000
KLU-1800
KLU-650
KLU-1200
KLU-2000
KLU-700
KLU-1500
KLU-2500
KLU-800
KLU-1600
KLU-3000
KLU-4000
Recommended blocks for Class L fuses, see page 1-2.
UL Listed, Guide JDDZ, File E4273, CSA Certified, Class RK1 per
CSA C22.2, No 248.12, Class 1422-02, File 53787, CE
Features
•
Separate overload and short-circuit elements provide time delay
for close sizing of high inrush loads linked with RK1 current-limitation and selective coordination ratio of 2:1 (within Low-Peak fuse
family) helps prevent widespread blackouts
•
Inventory consolidation of Class RK1, RK5 and H fuses for reduced
SKU investment and minimizing potential for misapplying fuse
•
300 kA RMS symmetrical interrupting rating provides adequate
ratings without obsolescence for all electrical systems, big or
small
•
Insulated end caps reduces exposure to live parts and extends air
gap to distance between blades of adjacent mounted fuses or to
housing
Typical applications
Data sheet no. 1013
1-24
•
Large distribution switchboards
•
Power panelboards
•
Motor control centers
•
Machinery disconnect switches
Data sheet no. LPN; 1003 (up to 60 A), 1007 (70-600 A)
LPS 1001 (up to 60 A), 1002 (70-600 A)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage, branch circuit fuses — 1
LPN-RK-4/10SP
LPN-RK-3-2/10SP
LPN-RK-25SP
LPN-RK-200SP**
LPN-RK-1/2SP
LPN-RK-3-1/2SP
LPN-RK-30SP
LPN-RK-225SP**
LPN-RK-6/10SP
LPN-RK-4SP
LPN-RK-35SP**
LPN-RK-250SP**
LPN-RK-8/10SP
LPN-RK-4-1/2SP
LPN-RK-40SP**
LPN-RK-300SP**
LPN-RK-1SP
LPN-RK-5SP
LPN-RK-45SP**
LPN-RK-350SP**
LPN-RK-1-1/8SP
LPN-RK-5-6/10SP
LPN-RK-50SP**
LPN-RK-400SP**
LPN-RK-1-1/4SP
LPN-RK-6SP
LPN-RK-60SP**
LPN-RK-450SP**
LPN-RK-1-4/10SP
LPN-RK-6-1/4SP
LPN-RK-70SP**
LPN-RK-500SP**
LPN-RK-600SP**
LPN-RK-1-6/10SP
LPN-RK-8SP
LPN-RK-80SP**
LPN-RK-1-8/10SP
LPN-RK-9SP
LPN-RK-90SP**
LPN-RK-2SP
LPN-RK-10SP
LPN-RK-100SP**
600 V LPS-RK
LPS-RK-1/10SP
LPS-RK-2-1/4SP
LPS-RK-10SP**
LPS-RK-100SP**
LPS-RK-2/10SP
LPS-RK-2-1/2SP
LPS-RK-12SP**
LPS-RK-110SP**
LPS-RK-3/10SP
LPS-RK-2-8/10SP
LPS-RK-15SP**
LPS-RK-125SP**
LPS-RK-4/10SP
LPS-RK-3SP
LPS-RK-17-1/2SP**
LPS-RK-150SP**
LPS-RK-1/2SP
LPS-RK-3-2/10SP
LPS-RK-20SP**
LPS-RK-175SP**
LPS-RK-6/10SP
LPS-RK-3-1/2SP
LPS-RK-25SP**
LPS-RK-200SP**
LPS-RK-8/10SP
LPS-RK-4SP
LPS-RK-30SP**
LPS-RK-225SP**
LPS-RK-1SP
LPS-RK-4-1/2SP
LPS-RK-35SP**
LPS-RK-250SP**
LPS-RK-1-1/8SP
LPS-RK-5SP
LPS-RK-40SP**
LPS-RK-300SP**
LPS-RK-1-1/4SP
LPS-RK-5-6/10SP
LPS-RK-45SP**
LPS-RK-350SP**
LPS-RK-1-4/10SP
LPS-RK-6SP**
LPS-RK-50SP**
LPS-RK-400SP**
LPS-RK-1-1/2SP
LPS-RK-6-1/4SP** LPS-RK-60SP**
LPS-RK-450SP**
LPS-RK-1-6/10SP
LPS-RK-7SP**
LPS-RK-70SP**
LPS-RK-500SP**
LPS-RK-1-8/10SP
LPS-RK-8SP**
LPS-RK-80SP**
LPS-RK-600SP**
LPS-RK-2SP
LPS-RK-9SP**
LPS-RK-90SP**
300
LPN-RK amp rating
100
10
1
0.1
0.01
Current in amps
* 0-60 A fuses available with Nickel plate option. Example: LPS-RK30SPNP).
70-600 A fuses available with tin-plate option. Example: LPS-RK-100SP-TP.
** Available with optional indication; to order, place "I" at end of catalog number
Example: LPN-RK-35SPI or LPS-RK-15SPI.
Recommended blocks for Class RK1 fuses, see page 1-2.
Data sheet no. LPN-RK 1003 (up to 60 A), 1007 (70-600 A)
LPS-RK 1001 (up to 60 A), 1002 (70-600 A)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-25
Low voltage,
branch circuit fuses
LPN-RK-150SP**
LPN-RK-175SP**
1000
LPN-RK-17-1/2SP
LPN-RK-20SP
100
LPN-RK-2-8/10SP
LPN-RK-3SP
10
LPN-RK-2/10SP
LPN-RK-3/10SP
1
LPN-RK-110SP**
LPN-RK-125SP**
1/10
LPN-RK-12SP
LPN-RK-15SP
Time in seconds
LPN-RK-2-1/4SP
LPN-RK-2-1/2SP
0.1
LPN-RK-1/10SP
LPN-RK-15/100SP
15/100
2/10
3/10
4/10 1/2
6/10
8/10
1
1-1/4
1-6/10
2
2-1/2
3-2/10
4
5
6-1/4
8
10
12
LPN Time-current characteristics — average melt
Catalog no. (amps)
250 V LPN-RK*
1 — Low voltage, branch circuit fuses
LPN Current limitation curves
0.1
200A
30A
A
Prospective short-circuit current (Symmetrical RMS Amps)
A-B = Asymmetrical available peak (2.3 x Sym. RMS Amps)
1000
100
10
0.1
1
1000
1000
Current in amps
100A
60A
10,000
200,000
1
600A
400A
100,000
Time in seconds
10
100,000
10,000
LPS-RK amp rating
100
0.01
B
400,000
Instantaneous peak let-through current in amps
2/10
3/10
4/10 1/2
6/10
8/10
1-1/4
1
1-6/10
2
2-1/2
3-2/10
4
5
6-1/4
8
10
12
300
1/10
LPS Time-current characteristics — average melt
LPS Current limitation curves
B
Instantaneous peak let-through current in amps
400,000
100,000
600A
400A
200A
100A
60A
10,000
30A
15A
300,000
100,000
1000
1000
10,000
A
Prospective short-circuit current (Symmetrical RMS Amps)
A-B = Asymmetrical available peak (2.3 x Sym. RMS Amps)
Data sheet no. LPN-RK 1003 (up to 60 A), 1007 (70-600 A)
LPS-RK 1001 (up to 60 A), 1002 (70-600 A)
1-26
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage, branch circuit fuses — 1
Catalog no. (amps)
250 V KTN-R
KTN-R-1
KTN-R-15
KTN-R-70
KTN-R-200
KTN-R-2
KTN-R-20
KTN-R-75
KTN-R-225
KTN-R-3
KTN-R-25
KTN-R-80
KTN-R-250
KTN-R-4
KTN-R-30
KTN-R-90
KTN-R-300
Ratings
KTN-R-5
KTN-R-35
KTN-R-100
KTN-R-350
Volts
KTN-R-6
KTN-R-40
KTN-R-110
KTN-R-400
KTN-R-8
KTN-R-45
KTN-R-125
KTN-R-450
KTN-R-10
KTN-R-50
KTN-R-150
KTN-R-500
KTN-R-12
KTN-R-60
KTN-R-175
KTN-R-600
KTS-R-1
KTS-R-12
KTS-R-70
KTS-R-225
KTS-R-2
KTS-R-15
KTS-R-75
KTS-R-250
KTS-R-3
KTS-R-30
KTS-R-80
KTS-R-300
KTS-R-4
KTS-R-35
KTS-R-90
KTS-R-350
KTS-R-5
KTS-R-40
KTS-R-125
KTS-R-400
KTS-R-6
KTS-R-45
KTS-R-150
KTS-R-450
KTS-R-8
KTS-R-50
KTS-R-175
KTS-R-10
KTS-R-60
KTS-R-200
KTS-R-20
KTS-R-100
KTS-R-500
KTS-R-25
KTS-R-110
KTS-R-600
Fast-acting, current-limiting Class RK1 fuses. For superior electrical
protection, Eaton recommends upgrading KTN-R fuse applications to
Bussmann series Low-Peak LPN-RK 250 V or LPS-RK 600 V fuses,
see pages 1-24 to 1-26. For dimensions, see page 1-3.
•
•
KTN-R
− 250 Vac (or less)
− 250 Vdc (70-350 A)
•
•
•
KTS-R 600 Vac (or less)
Amps 1-600 A
IR
•
200 kA RMS Sym.
•
100 kA Vdc (KTN-R)
Agency information
•
KTN-R
•
•
•
CSA Certified, Class 1422-02, File 53787
KTS-R
•
•
•
UL Listed, Std 248-12, Class RK1, Guide JDDZ, File E4273
UL Listed, Std 248-12, Class RK1, Guide JDDZ, File E54273
600 V KTS-R
Recommended blocks for Class RK1 fuses, see page 1-2.
CSA Certified, C22.2 No 248.12, Class 1422-02, File 53787
CE
Features
•
Current limitation for non-inductive circuits provides Class RK1
current-limiting response to maximum ground fault and shortcircuit conditions
•
200 kA interrupting rating provides high ratings at all circuit
locations
•
Economical protection for high-fault current circuits
Typical applications
•
Panelboards
Data sheet no. 1043 (KTN-R), 1044 (KTS-R)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-27
Low voltage,
branch circuit fuses
KTN-R (250 V) and KTS-R (600 V) Class RK1
Limitron fast-acting fuses
1 — Low voltage, branch circuit fuses
600
400
200
100
300
60
KTS-R Time-current characteristics — average melt
30
KTN-R Time-current characteristics — average melt
Amp rating
100
Time in seconds
10
1
0.1
10,000
1000
100
40
0.01
Current in amps
KTS-R Current limitation curves
B
100,000
600A
400A
200A
100A
10,000
60A
30A
1000
1000
100,000
A
10,000
Instantaneous peak let-through current in amps
400,000
200,000
KTN-R Current limitation curves
Prospective short-circuit current (Symmetrical RMS Amps)
A-B = Asymmetrical available peak (2.3 x Sym. RMS Amps)
Data sheet no. 1043 (KTN-R), 1044 (KTS-R)
1-28
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage, branch circuit fuses — 1
Dual-element, time-delay Class RK5 fuses. FRN-R — 10 seconds
(minimum) at 500% rated amps (8 seconds for 0-30 A sizes). FRS-R
— 10 seconds (minimum) at 500% rated amps. FRN-R and FRS-R
available with optional indication on select ratings (see catalog
numbers table). For superior electrical protection, Eaton recommends
upgrading to Bussmann series Low-Peak LPN-RK (250 V) or LPS-RK
(600 V) fuses, see pages 1-24 to 1-26. For dimensions, see page 1-3.
Ratings
•
Volts
•
•
FRN-R
− 250 Vac (or less)
FRN-R-1/8
FRN-R-2-1/4
FRN-R-12*
FRN-R-110
FRN-R-15/100
FRN-R-2-1/2
FRN-R-15*
FRN-R-125
FRN-R-2/10
FRN-R-2-8/10
FRN-R-17-1/2*
FRN-R-150
FRN-R-1/4
FRN-R-3
FRN-R-20*
FRN-R-175
FRN-R-3/10
FRN-R-3-2/10
FRN-R-25*
FRN-R-200
FRN-R-4/10
FRN-R-3-1/2
FRN-R-30*
FRN-R-225
FRN-R-1/2
FRN-R-4
FRN-R-35*
FRN-R-250
FRN-R-6/10
FRN-R-4-1/2
FRN-R-40*
FRN-R-300
FRN-R-8/10
FRN-R-5
FRN-R-45*
FRN-R-350
FRN-R-50*
FRN-R-400
FRN-R-60*
FRN-R-450
− 250 Vdc (225-600 A)
FRN-R-1-1/4
FRN-R-6-1/4
FRN-R-70
FRN-R-500
FRN-R-600
FRN-R-1-4/10
FRN-R-7
FRN-R-75
FRN-R-1-1/2
FRN-R-7-1/2
FRN-R-80
− 300 Vdc 1/10-30 A, 65-600 A
FRN-R-1-6/10
FRN-R-8*
FRN-R-85
− 250 Vdc* 35-60 A
FRN-R-1-8/10
FRN-R-9*
FRN-R-90
FRS-R-2
FRS-R-10*
FRS-R
− 600 Vac (or less)
600 V FRS-R
FRS-R-1/10
200 kA RMS Sym.
20 kA DC
Agency information
FRN-R
•
UL Listed, Std 248-12, Class RK5, Guide JDDZ, File E4273
•
CSA Certified, Class 1422-01, File 53787
FRS-R
•
UL Listed, Std 248-12, Class RK5, Guide JDDZ, File E4273
•
CSA Certified, Class 1422-02, File 53787
CE
Features
•
FRN-R-100
FRN-R-5-6/10
* Does not apply to indicating versions.
•
FRN-R-10*
FRN-R-6
IR
•
FRN-R-2
FRN-R-1
•
•
FRN-R-1/10
FRN-R-1-1/8
Amps 1/10-600 A
•
250 V FRN-R
− 125 Vdc (1/10-60 A, 110-200 A)
•
•
Catalog no. (amps)
Separate overload and short-circuit elements provide time-delay for
sizing as close as 125% of motor FLA
•
2:1 selective coordination amp ratio (within the Fusetron RK5 fuse
family) helps prevent overcurrent events from opening upstream
Fusetron fuses
•
Insulated end caps for 225-600 A (FRN-R) and 65-600 A (FRS-R)
fuses reduces exposure to live parts and extends air gap to
distance between blades of adjacent mounted fuses or to housing
FRS-R-100
FRS-R-1/8
FRS-R-2-1/4
FRS-R-12*
FRS-R-110
FRS-R-15/100
FRS-R-2-1/2
FRS-R-15*
FRS-R-125
FRS-R-2/10
FRS-R-2-8/10
FRS-R-17-1/2*
FRS-R-150
FRS-R-1/4
FRS-R-3
FRS-R-20*
FRS-R-175
FRS-R-3/10
FRS-R-3-2/10
FRS-R-25*
FRS-R-200
FRS-R-4/10
FRS-R-3-1/2
FRS-R-30*
FRS-R-225
FRS-R-1/2
FRS-R-4
FRS-R-35*
FRS-R-250
FRS-R-6/10
FRS-R-4-1/2
FRS-R-40*
FRS-R-300
FRS-R-8/10
FRS-R-5
FRS-R-45*
FRS-R-350
FRS-R-1
FRS-R-5-6/10
FRS-R-50*
FRS-R-400
FRS-R-1-1/8
FRS-R-6*
FRS-R-60*
FRS-R-450
FRS-R-1-1/4
FRS-R-6-1/4*
FRS-R-65
FRS-R-500
FRS-R-600
FRS-R-1-4/10
FRS-R-7*
FRS-R-70
FRS-R-1-1/2
FRS-R-7-1/2*
FRS-R-75
FRS-R-1-6/10
FRS-R-8*
FRS-R-80
FRS-R-1-8/10
FRS-R-9*
FRS-R-90
* Available with indication To order, place "ID" at the end of the catalog number.
Example: FRN-R-30ID or FRS-R-7ID.
Recommended blocks for Class RK5 fuses, see page 1-2.
Typical applications
•
Power panelboards
•
Motor control centers
•
Combination starters
•
Machinery disconnects
Data sheet no. FRN-R; 1019 (up to 60 A), 1020 (70-600 A)
FRS-R 1017 (up to 60 A), 1018 (70-600 A)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-29
Low voltage,
branch circuit fuses
FRN-R (250 V) and FRS-R (600 V) Class RK5
Fusetron™ energy efficient, dual-element,
time-delay fuses
1 — Low voltage, branch circuit fuses
FRN-R Current limitation curves
FRS-R Current limitation curves
B
100A
60A
10,000
30A
200A
100A
60A
Prospective short-circuit current (Symmetrical RMS Amps)
A-B = Asymmetrical available peak (2.3 x Sym. RMS Amps)
30A
10,000
15A
A
1000
1000
200,000
1000
100,000
A
600A
400A
Prospective short-circuit current (Symmetrical RMS Amps)
A-B = Asymmetrical available peak (2.3 x Sym. RMS Amps)
Data sheet no. FRN-R; 1019 (up to 60 A), 1020 (70-600 A)
FRS-R 1017 (up to 60 A), 1018 (70-600 A)
1-30
100,000
200A
100,000
10,000
600A
400A
Instantaneous peak let-through current in amps
100,000
1000
B
400,000
10,000
Instantaneous peak let-through current in amps
400,000
200,000
400
FRS-R Time-current characteristics — average melt
600
200
100
60
30
8
10
15
FRN-R Time-current characteristics — average melt
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage, branch circuit fuses — 1
Very fast-acting, current-limiting 300 V (JJN) and 600 V (JJS) Class T
fuse. For dimensions, see page 1-4.
Ratings
•
•
JJS 600 Vac (or less)
Amps
Multi-family meter stacks
•
VFD line protection
JJN-35
JJN-110
JJN-400
JJN-2
JJN-40
JJN-125
JJN-450
JJN-3
JJN-45
JJN-150
JJN-500
JJN-6
JJN-50
JJN-175
JJN-600
JJN-10
JJN-60
JJN-200
JJN-700
JJN-15
JJN-70
JJN-225
JJN-800
•
JJN 1-1200 A
JJN-20
JJN-80
JJN-250
JJN-1000
•
JJS 1-800 A
JJN-25
JJN-90
JJN-300
JJN-1200
JJN-30
JJN-100
JJN-350
IR
600 V JJS
•
200 kA RMS Sym.
•
20 kA DC @ 160 Vdc (JJN)
JJS-1
JJS-30
JJS-90
JJS-250
100 kA DC @ 170 Vdc (JJN)
JJS-2
JJS-35
JJS-100
JJS-300
JJS-3
JJS-40
JJS-110
JJS-350
•
Agency information
•
•
JJN-1
− 170 Vdc (601-1200 A)
•
Large apartment complexes
300 V JJN
JJN
− 300 Vac (or less)
− 160 Vdc (15-600 A)
•
•
Catalog no. (amps)
2011/65/EU
Volts
•
Typical applications
Low voltage,
branch circuit fuses
JJN (300 V) and JJS (600 V) Class T Limitron fastacting fuses
UL Listed, Std 248-15, Class T, Guide JDDZ, File E4273, CSA
Certified, Class 1422-02, File 53787, RoHS compliant, CE
Features
•
Series combination ratings with branch circuit breakers allows
broad range of coverage, independent of breaker manufacturer
•
Current limitation for non-inductive circuits provides Class T
current-limiting response to maximum ground fault and shortcircuit conditions
•
200 kA interrupting rating provides protection for virtually all circuit
locations
•
Small footprint allows more efficient use of panel space
JJS-6
JJS-45
JJS-125
JJS-400
JJS-10
JJS-50
JJS-150
JJS-450
JJS-15
JJS-60
JJS-175
JJS-500
JJS-20
JJS-70
JJS-200
JJS-600
JJS-25
JJS-80
JJS-225
JJS-800
Recommended blocks for Class T fuses, see page 1-2.
Current-limiting effects
300 V JJN
600 V JJS
Prosp.
S.C.C. Let-through current (apparent RMS Sym. vs. fuse rating)
—
15 A
30 A
60 A
100 A 200 A 400 A 600 A 800 A
500
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
5000
1000
1000
1000
1000 2000 3000 5000 5000
10,000
1000
1000
1000 2000 2000 4000 6000 7000
15,000
1000
1000
1000 2000 3000 4000 6000 9000
20,000
1000
1000
1000 2000 3000 5000 7000 10,000
25,000
1000
1000 2000 2000 3000 5000 7000 10,000
30,000
1000
1000 2000 2000 3000 5000 8000 11,000
35,000
1000
1000 2000 3000 4000 6000 8000 11,000
40,000
1000
1000 2000 3000 4000 6000 9000 11,000
50,000
1000
1000 2000 3000 4000 7000 9000 12,000
60,000
1000
1000 2000 3000 4000 7000 10,000 13,000
70,000
1000
1000 2000 3000 5000 7000 10,000 14,000
80,000
1000 2000 2000 3000 5000 8000 11,000 15,000
90,000
1000 2000 2000 3000 6000 8000 11,000 15,000
100,000
1000 2000 2000 4000 6000 8000 12,000 16,000
150,000
1000 2000 3000 4000 6000 9000 13,000 17,000
200,000 2000 2000 3000 4000 7000 9000 15,000 19,000
Prosp.
S.C.C.
Let-through current (apparent RMS Sym. vs. fuse rating)
—
15A
30A
60A
100A
200A
400A
600A
800A
500
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
5000
1000
1000
1000
2000
3000
4000
5000
5000
10,000
1000
1000
1000
2000
3000
6000
8000
9000
15,000
1000
1000
2000
3000
4000
7000 10,000 11,000
20,000
1000
1000
2000
3000
4000
7000 10,000 12,000
25,000
1000
1000
2000
3000
5000
7000 11,000 13,000
30,000
1000
1000
2000
3000
5000
8000 12,000 14,000
35,000
1000
1000
2000
3000
5000
9000 13,000 15,000
40,000
1000
2000
2000
4000
5000
9000 13,000 15,000
50,000
1000
2000
2000
4000
6000 10000 14,000 17,000
60,000
1000
2000
3000
4000
6000 10000 16,000 18,000
70,000
1000
2000
3000
4000
7000 11000 17,000 19,000
80,000
1000
2000
3000
4000
7000 11000 17,000 20,000
90,000
1000
2000
3000
4000
7000 12000 18,000 21,000
100,000
2000
2000
3000
5000
7000 12,000 19,000 22,000
150,000
2000
3000
4000
6000
8000 14,000 22,000 25,000
200,000
2000
3000
4000
6000
9000 16,000 24,000 28,000
1200 A
1000
1000
5000
9000
10,000
11,000
12,000
13,000
13,000
13,000
15,000
16,000
17,000
17,000
18,000
19,000
22,000
23,000
Data sheet no. 1025 (JJN) and 1029 (JJS)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-31
1 — Low voltage, branch circuit fuses
400
500
600
200
100
60
15
30
10
300
6
3
JJS Time-current characteristics — average melt
1
JJN Time-current characteristics — average melt
Amp rating
100
Time in seconds
10
1
Current in seconds
JJS Current limitation curves
B
100,000
800A
600A
400A
200A
100A
60A
10,000
30A
15A
100,000
100
A
200
10,000
1000
1000
Instantaneous peak let-through current in amps
400,000
200,000
JJN Current limitation curves
1000
100
1
10
0.01
10,000
0.1
Prospective short-circuit current (Symmetrical RMS Amps)
A-B = Asymmetrical available peak (2.3 x Sym. RMS Amps)
Data sheet no. 1025 (JJN) and 1029 (JJS)
1-32
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
W plug fuses
SL rejection base and TL Edison base plug fuses
Fast-acting Edison base plug fuse.
Time-delay, loaded link Edison (TL) and rejection base (SL) plug
fuses.
Ratings
•
Volts 125 Vac
•
Amps 1/2-12 A
•
Rating
IR 10 kA RMS Sym.
Agency information
•
UL Listed, Std 248-11, Guide JEFV, File E12112, CE
•
Volts 125 Vac
•
Amps 15-30 A
•
IR 10 kA RMS Sym.
Agency information
•
Features
•
Dependable, fast-acting circuit protection with 10 kA interrupting
rating for added safety when applied to existing plug fuse systems
and 125 volt single-phase control circuits
Typical applications
•
Replacement fuses for existing systems
•
For general purpose circuit protection
•
Lighting and other non-motor circuits
UL Listed, Std 248-11, Guide JEFV, File E12112, CE
Features
•
Time-delay loaded link TL Edison base plug fuses pass motor
overload starting currents without opening and allow closer sizing
to motor load for added protection
•
Time-delay loaded link SL fuses provide a rejection feature (when
used alone or with Fustat adapters to retrofit Edison base holders)
to help prevent overfusing
Typical applications
•
Small motor and inductive load circuits with high in-rush current
levels
Catalog no.* (amps)
W-1/2
W-2-1/2
W-6
W-10
•
TL for box cover units to provide small motor overload protection
W-1
W-3
W-6-1/2
W-12
•
SL for applications benefiting from fuse rejection
W-1-8/10
W-4
W-7
W-DUMMY**
W-2
W-5
W-8
Catalog no. (amps)
Rejection base SL
* W-15 to W-30 plug fuses obsolete. Replace with either T-(amp) or TL-(amp)
Edison base plug fuses.
** Non-conductive dummy base NOT a fuse.
SL-15
Recommended box cover units for W plug fuses, see page 1-36.
TL-15
SL-20
SL-25
SL-30
TL-20
TL-25
TL-30
Edison base TL
Recommended box cover units for SL and TL plug fuses, see page
1-36. For Fustat™ Edison base adapters for use with SL fuses see
page 1-35.
Data sheet no. 1036
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 1033 (SL) and 1035 (TL)
Eaton.com/bussmannseries
1-33
Low voltage,
branch circuit fuses
Low voltage, branch circuit fuses — 1
1 — Low voltage, branch circuit fuses
S rejection base and T Edison base plug fuses
P and TC CSA plug fuses
Dual-element, time-delay Edison (T) and rejection base
(S) plug fuses.
CSA Edison base Type P (P) dual-element fuses and Type D (TC)
dual-element, time-delay fuses.
Rating
Ratings
•
Volts 125 Vac
•
Volts 125 Vac or less
•
Amps
•
Amps 15-30 A
•
IR 10 kA
•
•
S 1/4-30 A
•
T 3/10-30 A
Agency information
IR 10 kA RMS Sym.
Agency information
•
UL Listed, Std 248-11, Type S and T (0 to 6-1/4) Guide JFHR,
File E56412 (7 to 30 A) Guide JEFV, File E12112; CSA Certified,
Class 1423-01, File 53787, CE
•
P - CSA Certified
•
TC - CSA Certified, Class 1423-01, File 53787
Features
•
Features
•
•
T Edison base fuses provide small motor overload protection when
used with box cover units
•
S rejection base fuses provide a rejection feature (when used
alone or with Fustat adapters to retrofit Edison base holders) to
prevent overfusing of branch circuits
Typical applications
•
S for residential load centers
•
T for box cover units to provide small motor overload protection
•
Applications benefiting from fuse rejection to help prevent
overfusing (S only)
P
•
"P" rating addresses the need of Canadian applications
•
Non-time delay protects non-inductive loads
TC
•
"D" rating addresses the need of Canadian applications
•
Heavy duty TC fuses are industrial strength products, featuring
dual-element construction
•
This spring loaded design provides superior short-circuit and
overload protection
•
The TC fuses have more time-delay than the medium duty
fuses in order to better protect industrial motors and residential
circuits
Typical applications
Catalog no. (amps)
•
P for non-inductive loads, residential load centers
Rejection base S
•
TC for box cover units to provide small motor overload protection
S-1/4
S-1-4/10
S-3-1/2
S-20
S-3/10
S-1-6/10
S-4
S-25
Catalog no. (amps)
S-4/10
S-1-8/10
S-7
S-30
Type P
S-1/2
S-2
S-8
P-15
S-6/10
S-2-1/4
S-9
Type D
S-8/10
S-2-1/2
S-10
TC-15
S-1
S-2-8/10
S-12
S-1-1/8
S-3
S-14
S-1-1/4
S-3-2/10
S-15
P-20
P-25
P-30
TC-20
TC-25
TC-30
Recommended box cover units for P and TC plug fuses, see page
1-36.
Edison base T
T-3/10
T-1-6/10
T-4
T-10
T-4/10
T-1-8/10
T-4-1/2
T-12
T-1/2
T-2
T-5
T-14
T-6/10
T-2-1/4
T-5-6/10
T-15
T-8/10
T-2-1/2
T-6
T-20
T-1
T-2-8/10
T-6-1/4
T-25
T-1-1/8
T-3
T-7
T-30
T-1-1/4
T-3-2/10
T-8
T-1-4/10
T-3-1/2
T-9
Recommended box cover units for S and T plug fuses, see page
1-36. For Fustat Edison base adapters for use with SL fuses see
page 1-35.
Data sheet no. 1032 (S) and 1034 (T)
1-34
Data sheet no. 1039 (TC)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
MB Edison base circuit breakers
SA Fustat fuse adapters
Edison base manual reset circuit breakers.
Adapters for using Type S and SL rejection base fuses in Edison base
fuse sockets. Amp rating rejection feature helps prevent overfusing.
Ratings
•
Volts 125 Vac only
•
Amps 15 and 20 A
•
Ratings
IR 10 kA RMS Sym.
Edison base circuit breakers fit standard Edison base fuse sockets
to provide resettable overcurrent protection (correct cause of
overcurrent event before resetting)
Replacing Edison base plug fuses in residential fuse panels
•
Fustat adapters screw into the "Edison" thread fuse sockets to
easy retrofit existing fuse installations to rejection base fuses
•
Available in various amp ratings to cover a wide range of rating
requirements to help prevent overfusing
Typical applications
•
Catalog no.* (amps)
MB-15
UL Listed, File E12853, CSA Certified, Class 6225-01, File 47235
Features
Typical applications*
•
Amps 1-30 A
•
UL Listed, File E14942
Features
•
Volts 125 Vac
•
Agency information
Agency information
•
•
MB-20
* Not for use in box cover units or for inductive loads.
Plug fuse installations where it is desirable to restrict fuse amp
ratings and help prevent overfusing
Catalog no.
Accepts S fuses
Accepts SL fuses
SA-1*
S-1 or smaller
—
SA-1-1/4*
S-1-1/4 or smaller
—
SA-1-6/10*
S-1-6/10 or smaller
—
SA-2*
S-2 or S-1-8/10
—
SA-2-1/2*
S-2-1/2 to S-1-8/10
—
SA-3-2/10*
S-3-2/10 to S-1-8/10
—
SA-4*
S-4 to S-3-1/2
—
SA-5*
S-5 to S-3-1/2
—
SA-6-1/4*
S-6-1/4 to S-3-1/2
—
SA-8*
S-8 to S-7
—
SA-10*
S-10 to S-7
—
SA-15**
S-15 to S-7
SL-15
SA-20**
S-20
SL-20
SA-30**
S-30 to S-25
SL-52, SL-30
* Single motor circuits - both running and short-circuit protection.
** Branch circuits.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1-35
Low voltage,
branch circuit fuses
Low voltage, branch circuit fuses — 1
1 — Low voltage, branch circuit fuses
Box cover units for Edison base plug fuses
SOU, SRU, SSU, SOW, SRW, SSW, SOX, SRX, SOY, SRY, SSY,
SSY-RL, STY, SCY, SOY-B and SSN
Box cover units for standard electrical boxes provide supplemental
fuse protection for small motor circuits and other loads requiring
overcurrent protection below that of the branch circuit overcurrent
protective device. Versions are available for a fused outlet, switch
or plain circuit that fit standard sized electrical boxes. See catalog
numbers for available configurations by box type.
Use with SA adaptors and S or SL Type fuses may prevent fuse
cover from closing. Not recommended for use with MB-15 Edison
base circuit breaker.
SOU
Ratings
•
Volts 125 V
•
Amps 15 A
SRU
2-1/4” handy box units
SSU
SSN
4” square box units
Agency information
•
UL Listed, Guide JAMZ, File IE6491
•
CSA Class 6225-01, File 47235
SSU
SRU
SOU
SOY
SRY
SSY
SSY-RL
SOY-B
STY
2-3/4” switch box units
Features
•
•
A low-cost method of controlling and protecting small motors
when used with Bussmann series Type T dual-element fuses
SOW
SSW
SRW
4” octagon box units
Low-cost supplemental protection and disconnection of 125 V or
less, single-phase circuits
Typical applications
•
Fractional horsepower, 125 volt single-phase motor circuits
•
General 125 volt supplemental circuits
Catalog no.
Box type
SOU
SRU
2-1/4" Handy
Fuse receptacle only (no switch or outlet)
Fused outlet
SRX
X
UL, CSA
UL
1/2
Fused switch
UL, CSA
3/4
Fuse receptacle only (no switch or outlet)
UL, CSA
1/2
Fused outlet
UL
1/2
Fused switch
UL, CSA
1
3/4
Fuse receptacle only (no switch or outlet)
UL, CSA
1
1
4" Octagon
Agency
information
Description
1/2
1
SOX
Max motor
size (Hp)
3/4
1
2-3/4" Switch
Pilot
light2
1
SOW
SSW
Switch
control1
SCY
SRX
1
SSU
SRW
X
1
1/2
Fused outlet
SOY
1
3/4
Fuse receptacle only (no switch or outlet)
SRY
1
1/2
Fused outlet
UL
SSY
1
1/2
Fused switch
UL, CSA
SSY-RL
4" Square
X
1
X
STY3
2
X
SCY4
2
SOY-B
SSN
1
2
3
4
Fuse
sockets
SOX
X
2
Single gang
1
X
UL
1/2
Fused switch/outlet with pilot light
—
1/2
Fused double pole switch, dual fuse receptacles
UL
1/2
Dual fused switches
UL
3/4
Dual fuse receptacles only (no switch or outlet)
UL
1/2
Weatherproof fused switch
UL
Switch turns power to fused load OFF or ON.
Pilot light indicates power to load (dark when switch OFF or fuse open).
Double pole switch opens both sides of circuit.
Can be used for two separate motors with common switch or a single motor
(3/4 Hp, 250 Vac max).
Data sheet no. 1129
1-36
UL, CSA
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage supplemental fuses — 2
Contents
The easiest and fastest way
to select and specify the right
control circuit fuse
Section
page
2
3
4
5
6
7
8
9
10
11
12
13
HH2 (ATR)
In-line fuse holders
ATC-FHID (ATC)
HHC (ATC)
HHD (ATC)
HHF (ATC)
HHG (ATC)
HHR (ATC)
HHS (ATC)
ATM-FHID (ATM)
HHL (ATM)
HHM (ATM)
HHU (ATM)
14
HHX (MAX))
MAX-FHID (MAX))
PCB fuseclips
ATC
1A5600
1A5780
ATM
1A5778
1A5779
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
2-1
Low voltage,
supplemental fuses
Bussmann series
Fuses Made SimpleTM Control Circuits
Description
Fuse holder and block selection guide
Product
Catalog symbol
Limiters
K (600 V)
Cable limiters
UH (250 V)
64000 (600 V)
Welder limiters
68000 (600 V)
ANN (125 V very fast-acting)
Bolt-on
ANL (80 V non time-delay)
4164 and 4164-FR blocks
Supplemental fuses
BAF (250 V)
KTK (600 V)
13/32" x 1-1/2" fast-acting
KLM (600 V)
FNM (250 V)
13/32" x 1-1/2" time-delay
FNQ (500 V)
13/32" x 1-3/8" fast-acting
BBS (600 V)
GBA (125 V)
GLD (125 V)
MIC (250 V fast-acting)
Pin indication and actuator
FNA 250 V time-delay)
MIS (600 V)
KAZ (600 V)
In-line fuses
GLQ
size rejecting
GMQ
size rejecting holder
HLQ
GLR
Non size-rejecting fuses and GMF
holders
GRF
HLR
Non size-rejecting fuse
holders
HLR-2A
Blade fuses and holders
ATR micro
ATM
ATM-_ID
ATM-LP
Fuses
ATC
ATC-_ID
MAX
MAX-_ID
2 — Low voltage supplemental fuses
Fuse holder and block selection guide
Catalog pages for the blocks and holders are denoted parenthetically "()" next to their catalog symbol.
Fuse
Catalog symbol
Blocks
DIN-Rail holders
Panel mount holders
In-line holders
PCB fuseclips
K_
—
—
—
—
—
UH_
—
—
—
—
—
Welder limiters
64000
68000
RM60_ (8-21)
—
—
—
—
Bolt-on limiters
ANN
ANL
4164 (2-4)
4164-FR (2-4)
—
—
—
—
HEB (8-51)
HEX (8-53)
1A3400_ (3-16)
5960 (3-16)
HEH (8-49)
1A3400_ (3-16)
5960 (3-16)
Cable limiters
13/32" x 1-1/2"
supplemental
fuses
BAF
FNM
FNQ
KLM
KTK
BMM603_ (8-6)
3743 (8-14)
4421 (8-14)
4515 (8-14)
CCP2-_ (11-2)
OPM-1038_ (8-12)
OPM-NG_ (8-13)
CHM (8-8)
NDNF1-WH (8-11)
CCPLP†† (30 A) (11-32)
HPC-D (8-43)
HPD (8-44)
HPF (8-43)
HPG (8-44)
HPM (8-44)
HPM-D (8-44)
HPS2 (8-45)
HPS (8-45)
13/32" x 1-3/8"
supplemental
fuses
BBS
BMM603_ (8-6)
—
HPS-L (8-45)
GBA
GLD
—
—
HLD (8-43)
—
1A1119 (3-15)
1A1120 (3-15)
1A1907 (3-15)
1A3398 (3-15)
1A4533 (3-15)
1A4534 (3-15)
5681 (3-16)
5682 (3-16)
MIC
FNA
BMM603_ (8-6)
3839†
—
HPF-C (8-43)
—
1A3400_ (3-16)
5960 (3-16)
MIS fuse
KAZ actuator
2778†
2837†
2838†
—
—
—
1A3400_ (3-16)
5960 (3-16)
In-line size
rejecting fuses
GLQ
GMQ
—
—
—
HLQ (2-10)
—
In-line nonrejecting fuses
GLR
GMF
GRF
—
—
—
HLR (2-11)
HLR-2A (2-11)
—
1A5600 (2-14)
1A5780 (2-14)
Pin indication
fuses and actuator
Automotive bladetype fuses
ATC
ATC-_ID
FB_-ATC*
15600*
—
—
ATC-FHID (2-14)
HHC (2-14)
HHD (2-14)
HHF (2-14)
HHG (2-14)
HHR (2-14)
HHS (2-14)
ATM
ATM-_ID
FB_-ATM*
RTMF-_*
—
—
ATM-FHID (2-14)
HHL (2-14)
HHM (2-14)
HHU (2-14)
1A5778 (2-14)
1A5779 (2-14)
ATM-LP
FB_-ATM*
RTMF-_*
—
—
HHV (2-14)
—
ATR micro
FB_-ATR*
—
—
HH2 (2-14)
—
MAX
MAX-_ID
HHX (2-14)
MAX-FHID (2-14)
* Not shown in this catalog, for details and available configurations, see Automotive and Home center catalog no. 5084.
† Not shown in this catalog, see data sheet for details.
†† UL 508 Listed disconnect switch, available in 1-, 2- and 3-pole versions.
2-2
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage supplemental fuses — 2
K 600 V cable limiters
UH 250 V cable limiters
Cable limiters for protecting 600 V low voltage distribution and
service entrance cables against short-circuit currents.
Cable limiters for protecting 250 V low voltage distribution and
service entrance cables used in residential applications against shortcircuit currents.
Ratings
Volts 600 Vac
•
IR 200 kA RMS Sym. @ 600 Vac
Agency information
•
UL Listed, File E90818, 600 Vac, 200 kA IR on catalog numbers
CDA-W, CDB-W, KCD, KCJ, KCM, KCM-B, KCR, KDD, KDF, KDJ,
KDM, KDP, KDR, KDU, KEW, KFM, KFT, KHF, KHJ, KHM, KHR
Features
•
•
Volts Up to 250 Vac
•
IR 100 kA RMS Sym.
Terminals and conductors
•
Center bolt-to-offset bolt terminals, Cu or Al conductors
•
Cu or Al conductors are permitted per the listed cable size. Select
the catalog number for the conductor size. See data sheet 1042
for dimensions.
Sizes and ratings available to meet many applications
Catalog no.
*Tubular terminals
KCY
KCZ
KCA
KCB
Cable size
(AWG)
4
3
2
1
Catalog no.
KCH
KCJ1, 2
KCM1, 2, 3
KCV
KCC
1/0
KCR1, 2
2/0
CDA-W1, 4
KCD1, 2
KCE
3/0
KCS
KCF
4/0
*Tubular and offset bolt-type terminals
KQV
12
KDE
KQT
10
KDF1
KFZ
8
KDH
KIG
6
KDJ1, 3
KDY
4
KDM1, 3
KDA
2
KDU1
KDB
1
KDR1, 2
KDC
1/0
CDB-W1, 4
1
KDD
2/0
*Compression connector rod and tubular terminals
KEX
4/0
KQO
KFH-A
250 kcmil
KDT
**Center bolt-type and off-set bolt-type terminals
KPF
4/0
KDP1
250 kcmil
KFM1
KFT1
1
KEW
350 kcmil
Center bolt-type and tubular terminals
4/0
KHM1
KHF1
1
350 kcmil
KHR1
KHJ
Cable size
(AWG)
Catalog no.
UHA
3/0
4/0
250 kcmil
350 kcmil
500 kcmil
600 kcmil
UHJ-M
3/0
250 kcmil
UHJ-T
350 kcmil
500 kcmil
UHJ-W
600 kcmil
800 kcmil
750 kcmil
750 kcmil
1000 kcmil
3/0
4/0
250 kcmil
350 kcmil
500 kcmil
600 kcmil
750 kcmil
750 kcmil
350 kcmil
500 kcmil
500 kcmil
750 kcmil
500 kcmil
750 kcmil
* Copper conductors only.
** Copper or aluminum conductors.
1 UL Listed (File E90818), 600 Vac, 200 kA I.R.
2 Available with shrink tube "-V" suffix.
3 Available with molded rubber boots.
4 Aluminum conductor only.
Cu cable size (AWG)
Al cable size (AWG)
Data sheet no. 1042
64000 and 68000 600 V welder limiters
Limiters for use on welder circuits. Note: welder limiters have
special characteristics and are not suitable for use on other circuit
types.
Ratings
•
Volts 600 Vac (or less)
•
IR 200 kA RMS Sym.
Features
•
Current-limiting devices designed specially
for use only on welder circuits
•
Time-current characteristics are designed
to hold on the intermittent overloading
encountered in welder operation, while
providing short-circuit protection to the
circuit and equipment
Catalog no.
Fuse holder type
Nominal amp rating
68300
Class H
300
68600
Class H
600
64200
Class J
200
64300
Class J
300
Recommended fuse blocks, see page 2-2.
Accessory boots (order separately)
Limiter
Boot catalog no.
Limiter
Boot catalog no.
KCM
BOOT-KCM
KDM
BOOT-KDM
Recommended Thomas and Betts crimp tool TBM-14M with die
15506 KDM/15515 KDR for installation.
Data sheet no. 1042
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 1045
Eaton.com/bussmannseries
2-3
Low voltage,
supplemental fuses
Ratings
•
2 — Low voltage supplemental fuses
ANL/ANN limiters
4164 and 4164-FR limiter blocks
Circuit limiters typically used in
fork lifts, marine, aviation and
battery charging systems. ANL
limiters are fast-acting and ANN
limiters are very fast-acting. Both
ANL and ANN limiters measure
7/8" x 3-3/16" (22x81mm) with a
depth that varies by amp rating.
Limiter fuse blocks for ANL and
ANN. 4164 is furnished with nylon
inserted locknuts and 4164-FR is
furnished with standard hex nuts.
4164
Fast-acting ANL
Dimensions
Ratings
•
•
•
Volts
•
ANL 80 Vdc
•
ANN 125 Vac, 80 Vdc
Very fast-acting ANN
Amps
•
ANL 35-750 A
•
ANN 10-800 A
•
L 3.38" x W 0.95" x H 1.62"
•
Studs center-to-center 2.43"
Ratings
4164-FR
•
Volts 125 Vac, 80 Vdc, 32 Vdc (self certified)
•
Amps 10-800 A
•
Poles single, stud terminal
Data sheet no. 2133
IR
•
ANL 2700 A @ 80 Vdc
•
ANN 2500 A @ 125 Vac, 2700 A @ 80 Vdc
Agency information
•
ANL: UL Recognized, CSA Certified, 35-750 A @ 80 Vdc,
IR 2700 A, Guide JFHR2, File E56412, Class 1422-30, File 53787,
SAE J1171
•
ANN: UL Recognized, CSA Certified 35-400 A @ 125 Vac, IR 2500
A and 500 A @ 80 Vdc, IR 2700 A, Guide JFHR2, File E56412,
Class 1422-30, File 53787, CE for 35-400 A
Catalog no. (amps)
Fast-acting ANL
ANL-35
ANL-125
ANL-250
ANL-500
ANL-40
ANL-130
ANL-275
ANL-600
ANL-50
ANL-150
ANL-300
ANL-675
ANL-750
ANL-60
ANL-175
ANL-325
ANL-80
ANL-200
ANL-350
ANL-100
ANL-225
ANL-400
Very fast-acting ANN
ANN-10
ANN-90
ANN-225
ANN-400
ANN-35
ANN-100
ANN-250
ANN-500
ANN-40
ANN-125
ANN-275
ANN-600
ANN-50
ANN-150
ANN-300
ANN-700
ANN-60
ANN-175
ANN-325
ANN-800
ANN-80
ANN-200
ANN-350
Features
•
Fast-acting sizing for inductive circuits (ANL)
•
Very fast-acting circuit protection (ANN)
•
Element viewing window shows limiter status at a glance
Data sheet no. 2023 (ANN), 2024 (ANL)
2-4
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage supplemental fuses — 2
BAF fast-acting 13/32" x 1-1/2" supplemental fuse
KTK fast-acting 13/32" x 1-1/2"supplemental fuse
Fast-acting, supplemental fuse.
Green color code (250 Vac max).
For superior protection, Eaton
recommends upgrading to
Bussmann series Low-Peak Class
CC fuses. See data sheet no. 1023.
Fast-acting supplemental fuse.
Black color code (600 Vac max).
For superior protection, Eaton
recommends upgrading to
Bussmann series Low-Peak Class
CC fuses. See data sheet no. 1023.
Ratings
Ratings
Agency information
250 Vac
125 Vac
UL
CSA
1/4 to 1
35 A
10 kA
—
X
1/10 to 30
1-1/2 to 2-1/2
100 A
10 kA
—
X
3
100 A
10 kA
X
X
4 to 10
200 A
10 kA
X
X
12 to 15
750 A
10 kA
X
X
20 to 30
200 A
10 kA
—
—
•
600 Vac
UL
CSA
100 kA
X
X
UL Listed, Std. 248-14, Guide JDYX, File E19180, CSA Certified,
C22.2 No. 248.14, Class 1422-01, File 53787, HRC-MISC, RoHS
compliant, CE
Catalog no. (amps)
UL Listed, Std. 248-14, 250 Vac (3 to 15 A) Guide JDYX,
File E19180, CSA Certified, 250 Vac (1/4 to 15 A) Class 1422-01,
File 53787
BAF-1-8/10
BAF-6
KTK-1/10
KTK-3/4
KTK-4
KTK-12
KTK-1/8
KTK-1
KTK-5
KTK-15
KTK-2/10
KTK-1-1/4
KTK-6
KTK-20
KTK-1/4
KTK-1-1/2
KTK-7
KTK-25
KTK-30
KTK-3/10
KTK-2
KTK-7-1/2
BAF-12
KTK-4/10
KTK-2-1/2
KTK-8
Catalog no. (amps)
BAF-1/4
Agency information
Agency information
Agency information
•
IR at rated voltage
BAF-1/2
BAF-2
BAF-6-1/4
BAF-15
KTK-1/2
KTK-3
KTK-9
BAF-6/10
BAF-2-1/2
BAF-7
BAF-20
KTK-6/10
KTK-3-1/2
KTK-10
BAF-8/10
BAF-3
BAF-8
BAF-25
BAF-1
BAF-4
BAF-9
BAF-30
BAF-1-1/2
BAF-5
BAF-10
Features
•
Green color code for maximum 250 Vac rating
•
Fiber tube construction with nickel-plated brass endcaps
Typical applications
•
General purpose circuits
•
Lighting circuit protection
•
Meter circuits
Features
•
Black color code for 600 Vac rating
•
Fast-acting for resistive loads
•
Melamine tube construction with nickel-plated bronze endcaps
Typical applications
•
Control circuits
•
Lighting circuit protection
•
Meter circuits
Recommended blocks and holders for 13/32" x 1-1/2" fuses, see
page 2-2.
Recommended blocks and holders for 13/32" x 1-1/2" fuses, see
page 2-2.
Data sheet no. 2011 (0-30)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 1011
Eaton.com/bussmannseries
2-5
Low voltage,
supplemental fuses
IR at system voltage
Fuse amp
range
Fuse amp
range
2011/65/EU
2 — Low voltage supplemental fuses
KLM fast-acting 13/32" x 1-1/2" supplemental
fuse
FNM time-delay 13/32" x 1-1/2" supplemental
fuse
Fast-acting supplemental fuse.
Color code black (600 Vac/dc
max). For superior protection,
Eaton recommends upgrading to
Bussmann series Low-Peak Class
CC fuses. See data sheet no. 1023.
For protecting PV systems, use
PVM 10x30mm PV fuses. See data
sheet no. 10121.
Time-delay supplemental fuse.
Color code green (250 Vac max).
For superior protection, Eaton
recommends upgrading to
Bussmann series Low-Peak Class
CC fuses. See data sheet no.
1023.
2011/65/EU
Ratings
Ratings
IR at system voltage
IR at rated voltage
Fuse amp range
Agency information
Fuse amp
range
600 Vac
600 Vdc
UL
CSA
1/10 to 30
100 kA
50 kA
X
X
% of amp rating
Opening time
110%
4 hours minimum
135%
AC opens within 1 hour
•
UL
CSA
10 kA
X
X
1-1/8 to 3-1/2
100 A
10 kA
X
X
4 to 10
200 A
10 kA
X
X
12 to 30
10 kA
—
X
X
UL Listed, Std. 248-14, Guide JDYX; File E19180, CSA Certified,
Class 1422-01, File 53787, RoHS compliant, CE
Catalog no. (amps)
UL Listed, Std. 248-14, Guide JDYX, File E19180, CSA Certified,
C22.2 No. 248. 14, Class 1422-01, File 53787, RoHS compliant, CE
Catalog no. (amps)
KLM-1
125 Vac
35 A
Agency information
Agency information
KLM-1/10
Agency information
250 Vac
1/10 to 1
Electrical characteristics
•
2011/65/EU
KLM-5
KLM-15
FNM-1/10
FNM-8/10
FNM-2-1/2
FNM-6-1/4
FNM-1/8
FNM-1
FNM-2-8/10
FNM-7
FNM-15/100
FNM-1-1/8
FNM-3
FNM-8
FNM-2/10
FNM-1-1/4
FNM-3-2/10
FNM-9
KLM-1/8
KLM-1-1/4
KLM-6
KLM-20
FNM-1/4
FNM-1-4/10
FNM-3-1/2
FNM-10
KLM-2/10
KLM-1-1/2
KLM-7
KLM-25
FNM-3/10
FNM-1-1/2
FNM-4
FNM-12
KLM-1/4
KLM-2
KLM-8
KLM-30
FNM-4/10
FNM-1-6/10
FNM-4-1/2
FNM-15
KLM-3/10
KLM-2-1/2
KLM-9
FNM-1/2
FNM-1-8/10
FNM-5
FNM-20
FNM-2
FNM-5-6/10
FNM-25
FNM-2-1/4
FNM-6
FNM-30
KLM-1/2
KLM-3
KLM-10
FNM-6/10
KLM-3/4
KLM-4
KLM-12
FNM-3/4
Features
Features
•
Color coded for 600 Vac/dc maximum
•
Color coded for 250 Vac maximum
•
A full range DC performance fuse
•
Melamine tube construction with nickel-plated brass endcaps
•
Melamine tube construction with nickel-plated brass endcaps
Typical applications
Recommended fuse blocks and holders for 13/32" x 1-1/2" fuses, see
page 2-2.
•
Circuits with high inrush currents (motor/transformer loads)
•
Supplemental protection for 125 Vac and 250 Vac inductive circuits
Recommended fuse blocks and holders for 13/32" x 1-1/2" fuses, see
page 2-2.
Data sheet no. 2020
2-6
Data sheet no. 2028
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
FNQ time-delay 13/32" x 1-1/2" supplemental fuse
BBS fast-acting 13/32" x 1-3/8" supplemental fuse
Time-delay supplemental fuse.
Color code orange (500 Vac
max). For superior protection,
Eaton recommends upgrading to
Bussmann series Limitron FNQ-R
Class CC fuses. See data sheet no.
1014.
Fast-acting supplemental fuse.
Color codes black (600 Vac max
1/10 to 6 A), green (250 Vac max
7 to 10 A), purple (48 Vac max 12
to 30 A). (For superior protection,
Eaton recommends upgrading to
Bussmann series Low-Peak Class
CC fuses. See data sheet no.
1023.
2011/65/EU
Ratings
Fuse amp
range
Ratings
IR at rated voltage
Agency information
500 Vac
UL
CSA
10 kA
X
X
1/10 to 30
Fuse amp
range
1/10 to 6
Agency information
•
UL Listed, Std. 248-14, Guide JDYX, File E19180, CSA Certified,
C22.2 No. 248.14, Class 1422-01, File 53787, HRC-MISC, RoHS
compliant, CE
Catalog no. (amps)
FNQ-1/10
FNQ-3-2/10
250 Vac
Agency information
48 Vac
UL
10 kA
—
—
X
X
7 to 10
—
10 kA
—
X
X
12 to 30*
—
—
—
—
—
Agency information
FNQ-9
UL Listed, Std. 248-14 (1/10-6 A@600 Vac, 7-10 A@250 Vac), Guide
JDYX, File E19180, CSA Certified, C22.2 No. 248.14 (1/10-6 A@600
Vac, 7-10 A@250 Vac), Class 1422-01, File 53787, CE
FNQ-1/8*
FNQ-1
FNQ-3-1/2
FNQ-10
FNQ-15/100*
FNQ-1-1/8
FNQ-4
FNQ-12
Catalog no. (amps)
FNQ-3/16
FNQ-1-1/4
FNQ-4-1/2
FNQ-14
BBS-1/10
BBS-8/10
BBS-4
BBS-15
FNQ-2/10
FNQ-1-1/2
FNQ-5
FNQ-15
BBS-2/10
BBS-1
BBS-5
BBS-20
FNQ-1/4
FNQ-1-6/10
FNQ-5-6/10
FNQ-20
BBS-1/4
BBS-1-1/2
BBS-6
BBS-25
BBS-30
FNQ-3/10
FNQ-2
FNQ-6
FNQ-25
BBS-4/10
BBS-1-6/10
BBS-7
FNQ-4/10
FNQ-2-1/4
FNQ-6-1/4
FNQ-30
BBS-1/2
BBS-1-8/10
BBS-8
FNQ-1/2
FNQ-2-1/2
FNQ-7
BBS-6/10
BBS-2
BBS-10
FNQ-6/10
FNQ-3
FNQ-8
BBS-3/4
BBS-3
BBS-12
* Not RoHS compliant.
CSA
* For interrupting rating, contact factory.
•
FNQ-8/10
IR at system voltage
600 Vac
Features
Features
•
Color coded for 500 Vac maximum
•
Fiber tube construction with nickel-plated brass endcaps
•
Color coded for 600 Vac (black) 250 Vac (green) and 48 Vac (purple)
for maximum
•
Fiber tube construction with nickel-plated brass endcaps
Typical applications
Typical applications
•
Motor control transformers
•
Control circuits
•
Circuits with in-rush currents
•
Gaseous vapor fixtures
•
HID ballasts
•
Electronic circuits
•
Hand-held meters
Recommended blocks and holders for 13/32" x 1-1/2" fuses, see
page 2-2.
Recommended blocks and holders for BBS fuses, see page 2-2.
Data sheet no. 1012
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 2010
Eaton.com/bussmannseries
2-7
Low voltage,
supplemental fuses
Low voltage supplemental fuses — 2
2 — Low voltage supplemental fuses
GBA/GLD fast-acting 1/4" x 1-1/4" pin-indicating
supplemental fuse
MIC fast-acting 13/32" x 1-1/2" pin-indicating
supplemental fuse
Fast-acting, pin-indicating fuse.
Fast-acting, pin-indicating
supplemental fuse. Green color
code (250 Vac max 1 to 15 A), gray
(32 Vac max 20 to 30 A).
Ratings
•
Volts — see agency information
•
Amps 1/2-15 A
•
IR — see agency information
Agency information
•
•
Ratings
UL Listed, Std. 248-14, 0-5 A/125 Vac, 10,000 AIC, Guide JDYX,
File E19180
Fuse amp
range
UL Recognized, 6 A/125 Vac, 1000 AIC 8-15 A/50 Vac/dc, 300 AIC
Guide JDYX2, File E19180
IR at voltage rating
Agency information
250 Vac
32 Vac
UL
CSA
1
35 A
—
X
—
100 A
—
X
—
•
CSA Certified, 0-5 A/125 Vac, 10,000 AIC Class 1422-01, File 53787
2 to 3
•
CE
5 to 10
200 A
—
X
—
15
750 A
—
X
—
—
10 kA
—
—
Catalog no. (amps)
20 to 30
GBA
GBA-1/2
GBA-1-1/2
GBA-4
GBA-10
GBA-3/4
GBA-2
GBA-5
GBA-15
GBA-1
GBA-3
GBA-8
Electrical characteristics
GLD
GLD-1/2
GLD-1-1/2
GLD-4
GLD-10
GLD-3/4
GLD-2
GLD-5
GLD-12
GLD-1
GLD-3
GLD-6
GLD-15
•
Opening time
110%
Indefinitely
135%
1 hour max.
Agency information
•
Features
•
% of fuse rating
UL Listed, Std. 248-14, 1-15 A, Guide JDYX, File E19180, CE
Catalog no. (amps)
Type GBA has a "red" pin indicator providing visual identification of
failed circuits, resulting in faster troubleshooting (reduced circuit
downtime)
Type GLD has a plated pin to activate transmitting a electrical
signal to indicate the location of opened circuits, resulting in
reduced downtime
Typical applications
MIC-1
MIC-5
MIC-15
MIC-2
MIC-8
MIC-20
MIC-3
MIC-10
MIC-25
MIC-30
Features
•
Color coded by maximum voltage rating
•
Pin indication for visual indication of open fuse condition
•
Control circuits
•
Silver-plated pin for positive, electrical signal activation
•
Electronic circuits
•
Fiber tube construction with nickel-plated bronze endcaps
Recommended fuse blocks/fuse holders for 1/4" x 1-1/4" indicating
fuses, see page 2-2.
Typical applications
•
Power electronic circuits in which fuse opening must be quickly
apparent
•
Control circuits
•
PLC Circuits
Recommended signal block for, 13/32" x 1-1/2" indicating fuses, see
page 2-2.
Data sheet no. 2012
2-8
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 10246
Eaton.com/bussmannseries
Low voltage supplemental fuses — 2
FNA time-delay 13/32" x 1-1/2" pin-indicating
supplemental fuse
Pin-indicating time-delay
supplemental fuse. Color
coded green (250 Vac
max 1/10 to 6 A), blue
(125 Vac max 6-1/4 to 15
A) and gray (32 Vac max
20 to 30 A).
MIS non time-delay 13/32" x 2" pin-indicating
supplemental fuse and KAZ non-fuse pinindicating actuator
MIS is a non time-delay pin-indicating fuse.
Dual-tube construction 12A and up
Ratings
Ratings
Fuse amp
range
IR at system voltage
Agency information
250 Vac
125 Vac
32 Vac
UL
CSA
1/10 to 8/10
35 A
10 kA
—
X
X
1 to 6
200 A
10 kA
—
X
X
6-1/4 to 15
—
10 kA
—
X
X
20 to 30
—
—
1 kA
—
—
FNA-3
FNA-9
FNA-1/8
FNA-1-1/8
FNA-3-2/10
FNA-10
FNA-15/100
FNA-1-1/4
FNA-3-1/2
FNA-12
FNA-2/10
FNA-1-4/10
FNA-4
FNA-15
FNA-1/4
FNA-1-1/2
FNA-4-1/2
FNA-20
FNA-3/10
FNA-1-6/10
FNA-5
FNA-25
FNA-4/10
FNA-1-8/10
FNA-5-6/10
FNA-30
FNA-1/2
FNA-2
FNA-6
FNA-6/10
FNA-2-1/4
FNA-6-1/4
FNA-3/4
FNA-2-1/2
FNA-7
FNA-8/10
FNA-2-8/10
FNA-8
Features
Volts
600 Vac
600 Vac
Amps
1-12 A
N/A
IR
200 kA
200 kA
Load
Opening time
All
110%
4 hrs. (min.)
1-5 A
150%
6 min. (max.)
6-12 A
150%
12 min. (max.)
MIS fuse catalog no. (amps)
Catalog no. (amps)
FNA-1
KAZ actuator
MIS Fuse
UL Listed, 1/10 to 8/10 A @ 125/250 Vac, 1-15 A @ 125 Vac, Guide
JDYX, File E19180, CSA Certified, 1/10 to 10 A @ 125 Vac, Class
1422-01, File 53787, CE
FNA-1/10
MIS fuse
MIS fuse electrical characteristics
Agency information
•
Low voltage,
supplemental fuses
KAZ is a non-fuse actuator mounted in
parallel with fuses having a 50 amp or larger
rating to provide blown fuse dropout for
shunt-trip fused switches. To order, specify
catalog number KAZ.
MIS-1
MIS-3
MIS-5
MIS-10
MIS-2
MIS-4
MIS-8
MIS-12
KAZ agency information
•
UL Listed, Guide JDVS, File E58836, CE
MIS fuse features
•
Pin indicator provides visual identification of failed circuits,
resulting in faster troubleshooting (reduced circuit downtime)
•
Fuse can be used in circuits rated 600 V or less
•
High 200 kA interrupting rating for high fault current circuits
MIS fuse typical applications
•
480 V control circuits
PLC circuits
•
Color coded by maximum voltage rating
•
•
Pin-indication for visual indication of open fuse condition
KAZ actuator features
•
Dual-element, time-delay performance permits close sizing on
control transformers and relays
•
Convenient means to add open fuse signaling
•
Silver-plated pin for positive, electrical signal activation
•
Actuator can be used in circuits rated 600 V or less
12 amp and more versions are dual-tube construction
•
High 200 kA interrupting rating for high fault current circuits
•
Recommended signal block for 13/32" x 1-1/2" indicating fuses, see
page 2.2.
KAZ actuator typical applications
•
Large, shunt-trip fused switches
•
Fuse protected circuits rated 50 A or larger with shunt-trip devices
Recommended signal blocks for MIS and KAZ, see page 2-2.
Data sheet no. 2029
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 2021
Eaton.com/bussmannseries
2-9
2 — Low voltage supplemental fuses
GLQ fast-acting, size-rejecting supplemental fuse
GMQ time-delay, size-rejecting supplemental fuse
Fast-acting, size-rejecting in-line
fuse. Match fuse and holder amp
rating per catalog number table
below.
Time-delay, size-rejecting in-line
fuse. Match fuse and holder amp
rating per catalog number table
below.
Ratings
Ratings
•
Volts 300 Vac (or less)
•
Volts 300 Vac (or less)
•
Amps 1-10 A
•
Amps 1/2 to 6-1/4 A
•
IR 10 kA
•
IR 10 kA
Agency information
Agency information
•
UL Listed, Std. 248-14, (Guide JDYX, File E19180), CSA Certified
C22.2 No. 248.14, (Class 1422-01,File 53787), CE
•
Catalog no. (amps) and holders
Catalog no. (amps) and holders
Fuse
Holder1, 2
Fuse
Holder1, 2
Fuse
Holders1, 2
Fuse
Holders1, 2
GLQ-1
HLQ-1-6/10
GLQ-3
HLQ-3-2/10
GMQ-1/2
HLQ-1/2
GMQ-2-1/2
HLQ-3-2/10
GLQ-1-1/2
HLQ-1-6/10
GLQ-4
HLQ-5
GMQ-6/10
HLQ-1-6/10
GMQ-3
HLQ-3-2/10
GLQ-1-6/10
HLQ-1-6/10
GLQ-5
HLQ-5
GMQ-8/10
HLQ-1-6/10
GMQ-3-2/10
HLQ-3-2/10
GLQ-2
HLQ-3-2/10
GLQ-9
HLQ-10
GMQ-1
HLQ-1-6/10
GMQ-4
HLQ-5
GLQ-2-1/2
HLQ-3-2/10
GLQ-10
HLQ-10
GMQ-1-1/4
HLQ-1-6/10
GMQ-5
HLQ-5
GMQ-1-6/10
HLQ-1-6/10
GMQ-6-1/4
HLQ-8
GMQ-2
HLQ-3-2/10
1 Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class
6225-01, File 47235 10 A, 300 Vac.
2 Units can be panel-mounted either in a knockout hole with a separate steel
clip (BK/A-104) or in a keyhole punch using separate mounting clip NO.6374 for
panels of thickness 0.043"to 0.062" or NO.4909 for thickness 0.030" to 0.042".
Note: Do not put tension on line (rear) terminal of fuse holder.
Features
•
In-line, fast-acting circuit protection
•
Rejection feature prevents overfusing
Typical applications
•
UL Listed, Std. 248-14, (Guide JDYX, File E19180), CSA Certified,
(Class 1422-01, File 53787), CE
In-line lighting ballast protection
1 Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class
6225-01, File 47235 10 A, 300 Vac.
2 Units can be panel-mounted either in a knockout hole with a separate steel
clip (BK/A-104) or in a keyhole punch using separate mounting clip NO.6374 for
panels of thickness 0.043"to 0.062" or NO.4909 for thickness 0.030" to 0.042"
Note: Do not put tension on line (rear) terminal of fuse holder.
Features
•
In-line, fast-acting circuit protection
•
Rejection feature prevents overfusing
Typical applications
•
In-line lighting ballast protection
HLQ fuse holders for both GLQ and GMQ fuses
Data sheet no. 2033
2-10
Data sheet no. 2030
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
GLR fast-acting, non size-rejecting
supplemental fuse
GMF/GRF time-delay, non size-rejecting
supplemental fuses
Fast-acting, non-rejection, in-line
fuse. All fuses use the same HLR
or HLR-2A holders.
Time-delay, non-rejection, in-line
fuse. All fuses use the same HLR
or HLR-2A holders.
Ratings
Ratings
•
Volts 300 Vac (or less)
•
Volts 300 Vac (or less)
•
Amps 3/16-15 A
•
Amps 3/10-10 A
•
IR 10 kA
•
IR 10 kA
Agency information
•
Agency information
UL Listed, Std. 248-14, 0-15 A/300 Vac Guide JDYX, File E19180,
CSA Certified C22.2, No. 248-14, 0-10 A/300 V Class 1422-01, File
53787, CE
•
Catalog no. (amps) and holders
Catalog no. (amps) and holders
Fuse
Holder1, 2*
Fuse
Holder1, 2*
GLR-1/2
HLR
GLR-6
HLR
GLR-1
HLR
GLR-7
HLR
GLR-1-1/2
HLR
GLR-8
HLR
GLR-1-6/10
HLR
GLR-9
HLR
GLR-2
HLR
GLR-10
HLR
GLR-3
HLR
GLR-12
HLR
GLR-4
HLR
GLR-15
HLR-2A
GLR-5
HLR
1 Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class
6225-01, File 47235 12 A, 300 Vac.
2 Units can be panel-mounted either in a knockout hole with a separate steel
clip (BK/A-104) or in a keyhole punch using separate mounting clip NO.6374 for
panels of thickness 0.043"to 0.062" or NO.4909 for thickness 0.030" to 0.042".
* For two leads (one each for line and loadside) order HLR-2A, 15 A, 300 V
Note: Do not put tension on line (rear) terminal of fuse holder.
"A" in-line holder
An alternative to the HLR fuse holder is the "A" fuse holder. The A
fuse holder comes WITHOUT leads. The customer inserts NO.18
insulated solid copper wire into the lineside receptacle as well as
into the load side receptacle. It has the same body dimensions,
utilizes the same mounting hole, and takes the same mounting clips
as the HLR. The A fuse holder is UL Recognized, 10 A, 300 Vac,
Guide IZLT2, File E14853 and CSA Certified, 10 A, 300 Vac, Class
6225-01, File 47235. Order catalog number A.
Features
•
Fuse
Holder1, 2*
Fuse
Holder1, 2*
GMF-3/10
HLR
GMF-3
HLR
GMF-1/2
HLR
GMF-3-2/10
HLR
GMF-6/10
HLR
GMF-4
HLR
GMF-8/10
HLR
GMF-5
HLR
GMF-1
HLR
GMF-6-1/4
HLR
GMF-1-1/4
HLR
GMF-7
HLR
GMF-1-6/10
HLR
GRF-8
HLR
GMF-2
HLR
GMF-10
HLR
GMF-2-1/2
HLR
GRF-10
HLR
GMF-2-8/10
HLR
1 Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class
6225-01, File 47235 12 A, 300 Vac.
2 Units can be panel-mounted either in a knockout hole with a separate steel
clip (BK/A-104) or in a keyhole punch using separate mounting clip NO.6374 for
panels of thickness 0.043"to 0.062" or NO.4909 for thickness 0.030" to 0.042".
* For two leads order HLR-2A, 15 A, 300 V
Note: Do not put tension on line (rear) terminal of fuse holder.
"A" in-line holder
An alternative to the HLR fuse holder is the A fuse holder. The A
fuse holder comes WITHOUT leads. The customer inserts NO.18
insulated solid copper wire into the line side receptacle as well as
into the load side receptacle. It has the same body dimensions,
utilizes the same mounting hole, and takes the same mounting clips
as the HLR. The A fuse holder is UL Recognized, 10 A, 300 Vac,
Guide IZLT2, File E14853 and CSA Certified, 10 A, 300 Vac, Class
6225-01, File 47235. Order catalog number A.
Features
In-line, fast-acting circuit protection.
Typical applications
•
UL Listed, Std. 248-14 0-10 A, Guide JDYX, File E19180, CSA
Certified, Class 1422-01, File 53787, CE
•
In-line, time-delay circuits protection
Typical applications
In-line lighting ballast protection
•
HLR-2A
fuse holder
In-line lighting ballast protection
HLR
fuse holder
Data sheet no. 2032
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 2031
Eaton.com/bussmannseries
2-11
Low voltage,
supplemental fuses
Low voltage supplemental fuses — 2
2 — Low voltage supplemental fuses
ATR fast-acting micro blade fuse
ATM and ATM-LP fast-acting blade fuses
Fast-acting, color-coded 2-leg micro
blade fuse.
Fast-acting, color-coded blade fuse
available in standard and low-profile
versions. Standard version available
with indication.
Ratings
•
Volts 32 Vdc
•
Amps 5-30 A
•
IR 1000 A
2011/65/EU
Agency information
•
•
Volts 32 Vdc
•
Amps 1-30 A
•
IR 1000 A
Indicating
Agency information
RoHS compliant
•
Catalog no. (amps)
Fuse
Color code
ATR-5
Tan
ATR-20
Yellow
Brown
ATR-25
Clear
ATR-10
Red
ATR-30
Green
ATR-15
Blue
ATR-7-1/2
Fuse
Color code
•
Space-savings size
•
Industry standard color coding for easy identification of fuse rating
Standard
UL Listed, Guide FHXT, File AU 169 (2-30 A non-indicating ATM)
Catalog no. (amps)
Features
Typical applications
•
Low-profile
Ratings
Automotive
Recommended holder for ATR fuses, see page 2-14.
Non-indicating
*Indicating
Low-profile
ATM-1
—
—
Color code
Black
ATM-2
—
ATM-2LP
Gray
ATM-3
ATM-3ID
ATM-3LP
Violet
ATM-4
—
ATM-4LP
Pink
ATM-5
ATM-5ID
ATM-5LP
Tan
ATM-7-1/2
ATM-7-1/2ID
ATM-7-1/2LP
ATM-10
ATM-10ID
ATM-10LP
Brown
Red
ATM-15
ATM-15ID
ATM-15LP
Blue
ATM-20
ATM-20ID
ATM-20LP
Yellow
ATM-25
ATM-25ID
ATM-25LP
Clear
ATM-30
ATM-30ID
ATM-30LP
Green
* Call customer satisfaction for ordering information.
Features
•
Industry standard color coding for easy identification of fuse rating
•
Indicating versions show blown fuse at a glance, speeds
troubleshooting
Typical applications
•
Automotive
Recommended blocks and holders for ATM fuses, see page 2-14.
Data sheet no. 2048 (ATM), 2050 (ATM-LP)
2-12
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Low voltage supplemental fuses — 2
ATC fast-acting blade fuse
MAX (MAXI) fast-acting blade fuse
Fast-acting, color-coded blade fuse
for automotive and control circuit
applications.
Fast-acting, color-coded, high amp
blade fuse. Available with and
without indication.
Ratings
Ratings
Volts 32 Vdc
•
Amps 1-40 A
•
IR 1000 A
Standard
Indicating
•
Volts 32 Vdc
•
Amps
Agency information
•
•
UL Recognized, (1-40 A) (Guide JFHR2, File E56412), SAE
Standard J1284
*Indicating
ATC-1
—
Black
ATC-2
—
Gray
ATC-3
ATC-3ID
Violet
ATC-4
—
Pink
ATC-5
ATC-5ID
Tan
ATC-7-1/2
ATC-7-1/2ID
ATC-10
ATC-10ID
Red
ATC-15
ATC-15ID
Blue
ATC-20
ATC-20ID
Yellow
ATC-25
ATC-25ID
Clear
ATC-30
ATC-30ID
Green
ATC-35
ATC-35ID
Blue-green
ATC-40
ATC-40ID
Orange
Color code
Brown
* Call customer satisfaction for ordering information.
Features
•
20-80 A (non-indicating)
•
20-100 A (indicating)
Indicating
IR 1000 A
Catalog no. (amps)
Catalog no. (amps)
Non-indicating
Standard
Low voltage,
supplemental fuses
•
Non-indicating
*Indicating
MAX-20
MAX-20ID
Color code
MAX-25
—
MAX-30
MAX-30ID
MAX-35
—
Brown
MAX-40
MAX-40ID
Orange
MAX-50
MAX-50ID
Red
MAX-60
MAX-60ID
Blue
MAX-70
MAX-70ID
Tan
MAX-80
MAX-80ID
Clear
—
MAX-100ID
Purple
Yellow
Gray
Green
* Call customer satisfaction for ordering information.
Features
•
Color coded housing for easy identification of fuse rating
•
Indicating versions show blown fuse at a glance, speeds
troubleshooting
Typical applications
•
Industry standard color coding for easy identification of fuse rating
•
•
Indicating versions show blown fuse at a glance, speeds
troubleshooting
Recommended holders for MAX fuses, see page 2-14.
Automotive
Typical applications
•
Automotive
•
Low voltage control circuits
Recommended blocks and holders for ATC fuses, see page 2-14.
Data sheet no. 2009
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 2049
Eaton.com/bussmannseries
2-13
2 — Low voltage supplemental fuses
In-line fuse holders for ATM, ATC and MAX fuses
PCB fuseclips for ATM and ATC fuses
ATM fuseclips
LED open
fuse indicator
easyID LED indicating holders available
for ATM, ATC and MAX fuses
Catalog no. 1A5779
Catalog no. 1A5778
•
15 A
•
15 A
•
Nickel-plated brass
•
Nickel-plated brass/glass-filled
nylon
Dimensions — mm (in)
Typical in-line blade fuse holders with leadwires
Dimensions — mm (in)
14.68 (0.578)
1.9
(0.075)
In-line fuse holders for ATM, ATC and MAX blade fuses. Versions
available with and without covers and with open fuse indication.
1.24 (0.049)
4.75
(0.187)
3.96
(0.156)
Base
Ratings
Fuseclips
4.98
(0.196)
•
Volts 32 Vdc
•
Amps 80% continuous of fuse rating. See catalog numbers table
for individual holder fuses amp ranges.
Catalog
Max
no.
Description
amps Electrical connection
ATR holder
HH2
Black w/ cover
15
2x4" #16 red leadwire
ATM holders - not for low-profile ATM fuses
HHL
Black w/ cover
20
2x4" #16 black leadwire
HHM
Black w/ cover
30
2x4" #12 red leadwire
HHU
Black w/ cover
30
2x4" #12 red leadwire
Indicating
holder,
ATM-FHID black w/ cover
20
2x4" #16 black leadwire
Low-profile ATM holder
HHV
Black w/ cover
20
2x4" #12 red leadwire
ATC holders
HHC
Yellow
20
2x4" #16 black leadwire
HHD
Black
30
2x4" #12 yellow leadwire
HHF
Black w/ cover
20
2x4" #16 yellow leadwire
HHG
Black w/ cover
30
2x4" #12 yellow leadwire
HHR
Black w/ cover
30
2x5" #12 red leadwire
HHS
Blue, self-stripping
20
Accepts #14-18 leadwire
Indicating
holder,
ATC-FHID
20
2x6" #16 black leadwire
black w/ cover
MAX holders
HHX
Black w/ cover
60
2x5" #6 red leadwire
Indicator,
black
w/
MAX-FHID cover
60
2x5" #6 red leadwire
Fuses must be fully inserted into the holder to provide a solid
connection. Poor or improper fuse insertion can result in fuse and
holder failure and loss of power and/or circuit protection.
8.64
(0.34)
11.18
(0.44)
1.57
(0.062)
3.18
(0.125)
3.66
(0.144)
3.66
(0.144)
3.18
(0.125)
2.54
(0.1)
1.45
(0.057)
1.57
(0.062)
2.18
(0.086)
4.47
(0.176)
1.57
(0.062)
3.66 (0.144)
3.66
(0.144)
4.47
(0.176)
3.66
(0.144)
Ø1.65 (0.065) TYP-4
3.66
(0.144)
Land pattern
Ø1.65 (0.065) TYP-4
Land pattern
ATC fuseclips
Catalog no. 1A5780
Catalog no. 1A5600
•
20 A
•
15 A
•
Tin-plated cartridge brass
•
Nickel-plated brass/glass-filled
nylon
Dimensions — in (mm)
Dimensions — mm (in)
0.295
(7.49)
19.30 (0.76)
4.45
(0.175)
0.33
(8.38)
0.15
(3.81)
3.18
(0.125)
Base
0.053
(1.35)
0.2
(5.08)
6.88
(0.271)
0.08
(2.03)
0.09
(2.29)
Fuseclips
6.35
(0.25)
11.1
(0.437)
1.27
(0.05)
5.08
(0.2)
4.06
(0.16)
5.08
(0.2)
Ø2.54 (0.1) TYP-4 ± 0.05
Land pattern
Data sheet no. ATM fuses 2128 (HHM, HHL)
ATC fuses 2107 (HHC, HHD, HHF, HHG)
Max fuses 2129 (HHX)
2-14
Data sheet no. 2131
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Electronic, PCB and small dimension fuses — 3
Contents
Section
page
Description
Product
C515, C519 time-delay
5x15 mm fuses
C518, C520 fast-acting
C517 fast acting
GDB, S500, S500-V fast-acting
IEC 5x20 mm fuses
GDA, S501, S501-V fast-acting
S505, S506SC time-delay
GDC, S505H, S505H-V, S505SCH,
S506 S506-V time-delay
GMA, GMA-V fast-acting
UL 5x20 mm fuses
•
•
•
•
•
•
•
5x15 mm
5x20 mm IEC
5x20 mm UL
1/4” x 5/8”
1/4” x 7/8”
1/4” x 1”
1/4” x 1-1/4”
PLUS
PCB fuse holders
and clips
GMC, GMC-V time-delay
GMD GMD-V time-delay
1/4" x 5/8" fuse
AGA fast-acting
1/4" x 7/8" fuse
AGW fast-acting
1/4" x 1" fuse
AGX fast acting
AGC, AGC-V, ABC, ABC-V fast-acting
GBB, GBB-V fast-acting
1/4" x 1-1/4" fuses
MDL, MDL-V time-delay
MDQ, MDQ-V, MDA, MDA-V timedelay
2
3
4
5
6
7
8
9
10
11
PCB holders and fuseclips
5x20 mm holders
H15-V, H15-H, HTC-60M
12
1/4" x 1-1/4" holders
HBH-I, HBH-M, HBV-I, HBV-M,
HBW-I, HBW-M
13
5 mm fuseclips
HTC-15M, HTC-140M, HTC-200M,
HTC-210M, 1A3399, 1A5018,
1A5601, 1A5602
14
1A1119, 1A1120, 1A1907, 1A3398,
1A4533, 1A4534
15
1/4" fuseclips
5681, 5682
9/32" fuseclips
5674
13/32" fuseclips
5960 1A3400
9/16" fuseclips
5592
16
For blocks and holders, see the following pages in Section 8
Fuse diameter
Pages
Panel mount blocks
1/4" fuses
4-5
Through panel holders
5 mm fuses
41
1/4" fuses
41-42
In-line holders
5 mm fuses
46
1/4" fuses
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
46-48
Eaton.com/bussmannseries
3-1
Electronic, PCB, small
dimension fuses
Full range of small dimension
fast-acting and time-delay
fuses
Catalog symbol/type
Fuses
3 — Electronic, PCB and small dimension fuses
C519 ferrule and C515 axial lead time-delay
5x15 mm glass tube fuses
C520 ferrule and C518 axial lead fast-acting
5x15 mm glass tube fuses
Ratings
Ratings
2011/65/EU
•
Volts
•
125 Vac (3.5-7 A)
•
250 Vac (125mA-3 A)
•
32 Vdc (self certified)
•
Amps 125mA-7 A
•
IR
•
250 Vac
•
32 Vdc (self certified)
•
Amps 100mA-5 A
•
IR
•
35 A (100mA-750mA @ 250 Vac)
25 A (350mA @ 600 Vac)
•
10 kA (100mA-5 A @ 125 Vac)
•
35 A (125mA-1A @ 250 Vac)
•
100 A (1.5-3.5 A @ 250 Vac)
•
100 A (1.25-3 A @ 250 Vac)
•
200 A (4-5 A @ 250 Vac)
•
400 A (3.5-7 A @ 125 Vac)
•
10 kA (125mA-3 A @ 125 Vac)
Agency information
•
UL Listed, Guide JDYX, File E19180 125mA-250mA and 375mA-3
A, UL Recognized, Guide JDYX2, File E19180, 350mA and 3.5-7
A, CSA Certified, Class 1422-01, File 53787 125mA-250mA and
375mA-3 A, RoHS compliant, CE
Features
•
Volts
•
Agency information
•
2011/65/EU
•
Time-delay for closer sizing on inductive circuits
Electronic circuits
•
Printed circuit boards
Features
•
Small footprint saves space in equipment
•
Fast-acting for maximum component protection
•
Available in ferrule and axial leaded configurations
Typical applications
Typical application
•
UL Recognized, Guide JDYX2, File E19180, CSA Certified, Class
1422-01, File 53787, RoHS compliant, CE
•
Electronic circuits
•
Printed circuit boards
Catalog no. (amps)
Catalog no. (amps)
Ferrule
Ferrule
C520-100-R
C520-500-R
C520-2.5-R
C520-125-R
C520-750-R
C520-3-R
C520-250-R
C520-1.5-R
C520-3.5-R
C520-375-R
C520-2-R
C520-4-R
C518-375-R
C518-2-R
C519-125-R
C519-600-R
C519-1.6-R
C519-3.5-R
C519-250-R
C519-750-R
C519-2-R
C519-4-R
C519-350-R
C519-1-R
C519-2.25-R
C519-5-R
C519-375-R
C519-1.25-R
C519-2.5-R
C519-500-R
C519-1.5-R
C519-3-R
C515-125-R
C515-750-R
C515-2-R
C515-5-R
C515-250-R
C515-800-R
C515-2.25-R
C515-6-R
C515-350-R
C515-1-R
C515-2.5-R
C515-7-R
C515-375-R
C515-1.25-R
C515-3-R
C515-500-R
C515-1.5-R
C515-3.5-R
C515-600-R
C515-1.6-R
C515-4-R
Data sheet no. 2006 (C515) and 2007 (C519)
3-2
Axial lead
C518-100-R
Axial lead
C520-5-R
C518-3.5-R
C518-125-R
C518-500-R
C518-2.5-R
C518-4-R
C518-250-R
C518-750-R
C518-3-R
C518-5-R
Data sheet no. 2026 (C518) and 2027 (C520)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Electronic, PCB and small dimension fuses — 3
C517 axial lead fast-acting 5x15 mm
glass tube fuse
S500 ferrule (GDB†) and S500-V axial lead
fast-acting, low breaking capacity 5x20 mm
glass tube fuses
2011/65/EU
•
Volts
•
350 Vac
•
32 Vdc (self certified)
•
Amps 3 A
•
IR
•
Volts
•
250 Vac (or less)
•
32 Vdc (self certified)
•
Amps 32mA-10 A
•
IR
•
100 A @ 350 Vac*
•
100 A @ 250 Vac
•
35 A (32mA-3.15 A)
•
10 kA @ 125 Vac
•
40 A (4 A)
* 350 Vac/100 A IR is UL Recognized.
•
63 A (6.3 A)
Agency information
•
80 A (8 A)
•
100 A (10 A)
•
2011/65/EU
Ratings
UL Listed, Guide JDYX, File E19180, CSA Certified, Class 142201, File 53787, UL Recognized, Guide JDYX2, File E19180, RoHS
compliant, CE
Features
•
Small footprint saves space in equipment
•
Fast-acting for maximum component protection
•
350 Vac rating for 277 V ballast circuit protection
Electronic, PCB, small
dimension fuses
Ratings
Agency information
•
cURus, SEMKO, VDE, BSI, IMQ, CCC, RoHS compliant, CE
•
Agency information not applicable to all ratings; see data sheet for
details.
Features
Typical applications
•
Fast-acting for maximum protection, conforms to IEC 60127-2
(160mA-10 A)
Typical applications
•
Electronic circuits
•
Printed circuit boards
•
Electronic ballast protection
•
Electronic circuits
Catalog no. (amps)*
S500-32-R
To order, use catalog number C517-3-R
S500-160-R
S500-800-R
S500-4-R
S500-40-R
S500-200-R
S500-1-R
S500-5-R
S500-50-R
S500-250-R
S500-1.25-R
S500-6.3-R
S500-63-R
S500-315-R
S500-1.6-R
S500-8-R
S500-10-R
S500-80-R
S500-400-R
S500-2-R
S500-100-R
S500-500-R
S500-2.5-R
S500-125-R
S500-630-R
S500-3.15-R
* GDB is not available with axial leads. To order axial leads, place “V” in the S500
catalog number. E.g., S500-V-32-R.
† When ordering GDB versions, do not add “-R” suffix to catalog number.
Data sheet no. 2025
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 2052 (S500), 2015 (GDB)
Eaton.com/bussmannseries
3-3
3 — Electronic, PCB and small dimension fuses
S501 ferrule (GDA†) and S501-V Axial lead
fast-acting high breaking capacity 5x20 mm
ceramic tube fuses
2011/65/EU
Ratings
•
S505 ferrule, and S505SC axial lead time-delay,
high-breaking capacity 5x20 mm
ceramic tube fuses
Volts
2011/65/EU
Ratings
•
Volts
•
250 Vac (or less)
•
250 Vac (or less)
•
32 Vdc (self certified)
•
32 Vdc (self certified)
•
Amps 50mA-10 A**
•
Amps 500mA-12 A
•
IR 1500 A @ 250 Vac
•
IR 1500 A @ 250 Vac
Agency information
Agency information
•
cURus, SEMKO, VDE, IMQ, CCC, CSA, BSI, MITI/JET,
RoHS compliant, CE
•
cURus, CSA, IMQ, VDE, SEMKO, CCC/CQC, PSE/JET, KC, BS,
RoHS compliant
•
Agency information not applicable to all ratings, see data sheet for
details.
•
Agency information not applicable to all ratings, see data sheet for
details.
Features
Features
•
Fast-acting for maximum protection
•
Time-delay performance ideal for inductive circuits.
•
High break capacity for use in higher fault energy electronic
circuitry
•
Conforms to IEC standards.
•
Conforms to IEC standards
•
Typical applications
•
Typical applications
Electronic circuits
Catalog no. (amps)*
Electronic circuits
Catalog no. (amps)*
S505-500-R**
S505-1.6-R
S505-4-R
S505-10-R
S505-800-R**
S505-2-R
S505-5-R
S505-12-R**
S501-50-R
S501-200-R
S501-800-R
S501-3.15-R
S505-1-R
S505-2.5-R
S505-6.3-R
S501-63-R
S501-250-R
S501-1-R
S501-4-R
S505-1.25-R
S505-3.15-R
S505-8-R
S501-80-R
S501-315-R
S501-1.25-R
S501-5-R
S501-100-R
S501-400-R
S501-1.6-R
S501-6.3-R
S501-125-R
S501-500-R
S501-2-R
S501-8-R
S501-160-R
S501-630-R
S501-2.5-R
S501-10-R
* To order axial leads, place “SC” in catalog number. E.g., S505SC-2-R.
** Axial leads not available.
* GDA is not available with axial leads. To order axial leads, place “V” in the S501
catalog number. E.g., S501-V-125-R.
† When ordering GDA version, do not add “-R” suffix to catalog number, GDA is
not available above 6.3 A.
Data sheet no. 2051 (S501), 2014 (GDA)
3-4
Data sheet no. 2037
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Electronic, PCB and small dimension fuses — 3
S505H ferrule, and S505H-V and S505SCH axial
time-delay high breaking capacity 5x20 mm
ceramic tube fuses
2011/65/EU
Ratings
Volts
•
•
•
•
600 Vac/400 Vdc (S505H
500mA-5 A
•
500 Vac/400 Vdc (S505H
6.3-10 A)
•
250 Vac (S505SCH)
2011/65/EU
Ratings
Volts
•
250 Vac (or less)
•
32 Vdc (self certified)
•
Amps 32mA-15 A**
•
IR 35 A @ 250 Vac
Agency information
Amps
•
500mA-10 A (S505H)
•
3.15-6.3 A (S505SCH)
IR @ 250 Vac
•
35 A (S505H)
•
1.5 kA (S505SCH / 50 Hz / 250 Vac / 400 Vdc)
•
100 A max AC
cURus, CCC, CQC, TUV, PSE/JET (S505H)
•
cURus, KC, CQC, TUV (S505SCH)
•
RoHS compliant
•
Agency information not applicable to all ratings; see data sheets
for details.
Conforms to IEC standards
Typical applications
•
Power supplies/adapters
•
Desktops/notebooks
Agency information not applicable to all ratings; see data sheet for
details.
•
Time-delay for inductive circuits
•
Conforms to IEC standards
•
Features
•
•
Typical applications
•
Time-delay, high breaking capacity
UR, CSA, cURus, SEMKO, VDE, BSI, IMQ, VDE, PSE/JET, CCC,
RoHS compliant
Features
Agency information
•
•
Electronic circuits
Catalog no. (amps)*
S506-32-R
S506-160-R
S506-800-R
S506-4-R
S506-40-R
S506-200-R
S506-1-R
S506-5-R
S506-50-R
S506-250-R
S506-1.25-R
S506-6.3-R
S506-63-R
S506-315-R
S506-1.6-R
S506-8-R
S506-80-R
S506-400-R
S506-2-R
S506-10-R
S506-100-R
S506-500-R
S506-2.5-R
S506-12.5-R
S506-125-R
S506-630-R
S506-3.15-R
S506-15-R
* GDC is not available with axial leads. To order axial leads, place “V” in the S506
catalog number. E.g., S506-V-15-R.
† When ordering GDC version, do not add “-R” suffix to catalog number., GDC
fuses are not available above 6.3 A.
Catalog no. (amps)
S505H*
S505H-500-R
S505H-1.6-R
S505H-4-R
S505H-800-R
S505H-2-R
S505H-5-R
S505H-1-R
S505H-2.5-R
S505H-6.3-R
S505H-1.25-R
S505H-3.15-R
S505H-8-R
S505H-10-R
S505SCH (axial lead only
S505SCH-3.15-R
S505SCH-5-R
S505SCH-6.3-R
* To order an axial lead S505H fuse, place “V” in catalog number.
E.g., S505H-V-5-R.
Data sheet no. 4406 (S505H), 10401 (S505SCH)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 4332 (S506), 2016 (GDC)
Eaton.com/bussmannseries
3-5
Electronic, PCB, small
dimension fuses
•
S506 ferrule (GDC†) and S506-V axial lead
time-delay low breaking capacity 5x20 mm
glass tube fuses
3 — Electronic, PCB and small dimension fuses
GMA ferrule and GMA-V axial leads fast-acting
5x20 mm glass tube fuses
GMC ferrule and GMC-V axial lead medium
time-delay 5x20 mm glass tube fuses
Ratings
Ratings
•
•
•
2011/65/EU
Volts
•
250 Vac (63mA-3 A)
•
250 Vac (63mA-3.15 A)
•
125 Vac (3.15-15 A)
•
125 Vac (3.5-10 A)
•
32 Vdc (self certified)
•
32 Vdc (self certified)
Amps 63mA-15 A
•
Amps 63mA-10 A
IR
•
IR
•
35 A (63mA-1 A @ 250 Vac, p.f. = 0.7-0.8)
•
35 A (63mA-1 A @ 250 Vac, p.f. = 0.7-0.8)
•
10 kA (63mA-6 A @ 125 Vac, p.f. = 0.7-0.8)
•
10 kA (63mA-6 A @ 125 Vac, p.f. = 0.7-0.8)
•
100 A (1.25-2.5 A @ 250 Vac, p.f. = 0.7-0.8)
•
100 A (1.25-3.15 A @ 250 Vac, p.f. = 0.7-0.8)
•
200 A (7-8 A @ 125 Vac, p.f. = 1.0)
•
200 A (6.3-10 A @ 125 Vac, p.f. = 1.0)
•
150 A (10-15 A @ 125 Vac, p.f. = 1.0)
Agency information
UL Listed, Std. 248-14 Guide JDYX, File E19180 up to 6 A, UL
Recognized, Guide JDYX2, File E19180, 7-15 A, CSA Certified,
Class 1422-01,File 53787 up to 6 A, PSE Approval 1-15 A, RoHS
compliant, CE
Features
•
•
UL Listed, Std. 248-14, Guide JDYX, File E19180 up to 6.3 A, UL
Recognized, Guide JDYX2, File E19180 7-10 A, CSA Certified,
Class 1422-01, File 53787 up to 6.3 A, MITI Approval, 1-10 A, KC,
RoHS compliant, CE
•
KC not applicable to all ratings; see data sheet for details
Features
Fast-acting for maximum protection
•
Typical applications
•
Volts
•
Agency information
•
2011/65/EU
Conforms to UL standards
Typical applications
Electronic circuits
•
Catalog no. (amps)*
GMA-63-R
GMA-600-R
GMA-2-R
GMA-7-R
GMA-100-R
GMA-750-R
GMA-2.5-R
GMA-8-R
GMA-125-R
GMA-800-R
GMA-3.15-R
GMA-10-R
GMA-200-R
GMA-1-R
GMA-3.5-R
GMA-15-R
GMA-250-R
GMA-1.25-R
GMA-4-R
GMA-300-R
GMA-1.5-R
GMA-5-R
GMA-500-R
GMA-1.6-R
GMA-6-R
* To order axial leads, place “V” in catalog number. E.g., GMA-V-8-R.
Electronic circuits
Catalog no. (amps)*
GMC-63-R
GMC-315-R
GMC-1.25-R
GMC-5-R
GMC-80-R
GMC-400-R
GMC-1.5-R
GMC-6-R
GMC-100-R
GMC-500-R
GMC-1.6-R
GMC-6.3-R
GMC-125-R
GMC-600-R
GMC-2-R
GMC-7-R
GMC-150-R
GMC-630-R
GMC-2.5-R
GMC-8-R
GMC-10-R
GMC-200-R
GMC-750-R
GMC-3.15-R
GMC-250-R
GMC-800-R
GMC-3.5-R
GMC-300-R
GMC-1-R
GMC-4-R
* To order axial leads, place “V” in catalog number. E.g., GMC-V-5-R.
Data sheet no. 2017
3-6
Data sheet no. 4395
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Electronic, PCB and small dimension fuses — 3
Ratings
•
•
Volts
•
250 Vac
•
32 Vdc (self certified)
Amps 125mA-4 A
•
IR
Volts
•
125 Vac (or less)
•
32 Vdc (self certified)
•
Amps 1-30 A
•
IR
•
10 kA (1 to 1-1/2 A @ 125 Vac)
•
10 kA (125mA-3 A @ 125 Vac, p.f. = 0.7-0.8)
•
200 A (2-5 A @ 125 Vac)
•
10 kA (4 A @ 125 Vac, p.f. = 1.0)
•
1000 A (6-30 A @ 32 Vac)
•
35 A (125mA-1 A @ 250 Vac, p.f. = 0.7-0.8)
•
100 A (1.2-3. A @ 250 Vac, p.f. = 0.7-0.8)
•
200 A (4 A @ 250 Vac, p.f. = 1.0)
Agency information
•
Agency information
•
Ratings
2011/65/EU
•
•
AGA fast-acting 1/4˝ x 5/8˝ glass tube fuse
UL Listed, Std. 248-14, Guide JDYX, File E19180 up to 3-1/2 A UL
Recognized, Guide JDYX2 12-30 A, CE
Features
UL Listed Guide JDYX, File E19180, UL Recognized Card (4 A),
Guide JDYX2, File E19180, 4 A, CSA Certified, Class 1422-01, File
53787, PSE/JET, File 1641-31003-1001, RoHS complaint, CE
Agency information not applicable to all ratings; see data sheet for
details
•
Fast-acting for maximum protection
•
Size rejects insertion of other fuse types
Typical applications
•
Features
Electronic circuits
•
Time-delay for inductive circuits
Catalog no. (amps)
•
Conforms to UL standards
AGA-1
Typical applications
•
Electronic circuits
AGA-3
AGA-7-1/2
AGA-25
AGA-30
AGA-1-1/2
AGA-5
AGA-10
AGA-2
AGA-6
AGA-15
AGA-2-1/2
AGA-7
AGA-20
Catalog no. (amps)*
GMD-125-R
GMD-375-R
GMD-800-R
GMD-2-R
GMD-150-R
GMD-400-R
GMD-1-R
GMD-2.5-R
GMD-200-R
GMD-500-R
GMD-1.2-R
GMD-3-R
GMD-250-R
GMD-600-R
GMD-1.25-R
GMD-4-R
GMD-300-R
GMD-630-R
GMD-1.5-R
GMD-315-R
GMD-750-R
GMD-1.6-R
* To order axial leads, place “V” in catalog number. E.g., GMD-V-2.5-R.
Data sheet no. 2019
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 2039
Eaton.com/bussmannseries
3-7
Electronic, PCB, small
dimension fuses
GMD ferrule and GMD-V axial leads time-delay
5x20 mm glass tube fuses
3 — Electronic, PCB and small dimension fuses
AGW fast-acting 1/4˝ x 7/8˝ glass tube fuse
AGX fast-acting 1/4˝ x 1˝ glass tube fuse
Ratings
Ratings
•
Volts
•
Volts
•
32 Vac
•
250 Vac (1//4-20 A)
•
32 Vdc (self certified)
•
125 Vac (25-30 A)
•
32 Vdc (1/4-30 A)
•
Amps 1-30 A
•
IR 1 kA AC
Features
•
Amps 1/4-30 A
•
IR
•
35 A (1/4-1 A @ 250 Vac)
•
10 kA (1/4-10 A @ 125 Vac)
Typical applications
•
200 A (15-20 A @ 125 Vac)
Electronic circuits
•
100 A (25-30 A @ 125 Vac)
•
1000 A (8-30 A @ 32 Vac)
•
•
Fast-acting for maximum protection
Catalog no. (amps)
AGW-1
AGW-3
AGW-7-1/2
AGW-25
AGW-1-1/2
AGW-4
AGW-10
AGW-30
AGW-2
AGW-5
AGW-15
AGW-2-1/2
AGW-6
AGW-20
Agency information
•
cULus up to 10 A, Guide JDYX, File E 19180 and Guide JDYX7, File
E19180, UL Recognized Card 15-30 A Guide JDYX2, File E19180,
CSA Component Acceptance Card 15-30 A Class No. 1422-01,
File 53787
Features
•
Size rejects inserting of other fuse types
Typical applications
•
Electronic circuits
Catalog no. (amps)
AGX-1/4
Data sheet no. 2040
3-8
AGX-1
AGX-4
AGX-15
AGX-3/10
AGX-1-1/4
AGX-5
AGX-20
AGX-3/8
AGX-1-1/2
AGX-6
AGX-25
AGX-30
AGX-4/10
AGX-2
AGX-7
AGX-1/2
AGX-2-1/2
AGX-8
AGX-3/4
AGX-3
AGX-10
Data sheet no. 2041
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Electronic, PCB and small dimension fuses — 3
AGC ferrule and AGC-V axial lead fast-acing
1/4" x 1-1/4˝ glass tube fuses
Ratings
•
•
2011/65/EU
Volts
Ratings
•
250 Vac (1/20-10 A)
•
250 Vac/125 Vdc (1/4-15 A, 20-30 A)*
•
32 Vac (12-40 A)
•
250 Vac (18 A)
•
32 Vdc (self certified)
•
32 Vdc (self certified)
Amps 1/20-40 A
•
Amps 1/4-30 A
IR
•
IR**
•
35 A (1/20-1 A @ 250 Vac)
•
35 A (1/4-1 A @ 250 Vac)
•
100 A (11/4-3 A @ 250 Vac)
•
100 A (11/2-3 A @ 250 Vac)
•
200 A (4-10 A @ 250 Vac)
•
200 A (4-10 A @ 250 Vac)
•
10 kA (1/20-10 A @ 125 Vac)
•
750 A (12-15 A @ 250 Vac)
•
1000 A (12-40 A @ 32 Vac)
•
400 A (18-20 A @ 250 Vac)
•
10 kA (1/4-15 A @ 125 Vac)
•
1 kA (18-30 A @ 125 Vac)
•
10 kA (1/4-15, 20 A @ 125 Vdc)
•
400 A (25-30 A @ 125 Vdc)
•
200 A (25-30 A @ 250 Vac)
UL Listed, Guide JDYX, File E19180, up to 10 A, UL Recognized,
Guide JDYX2, File E19180, 12-30 A, CSA Certified, Class 142201, CSA Component Acceptance Card, Class No. 1422-30, RoHS
compliant, CE
Features
•
Original electronic glass tube fuse
•
Fast-acting for maximum protection
•
Wide amp/volt ratings allow versatility of protecting electronic
circuits
Typical applications
•
Volts
•
Agency information
•
2011/65/EU
Electronic, PCB, small
dimension fuses
•
ABC ferrule and ABC-V axial leads fast-acting
1/4" x 1-1/4˝ ceramic tube fuse
* CSA approvals for 25 A and 30 A are at 125 Vac – IR 1000 A and Vdc – IR 400 A
(IR 1000 A at 75 Vdc)
** Interrupting ratings measured at 70% – 80% power factor on AC. The
interrupting ratings for 18 A and 20 A were measured at 85%-95% power factor
on AC. The interrupting ratings for 25 A and 30 A were measured at 89% power
factor on AC.
Agency information
•
Electronic circuits
UL Listed, Std. 248-14, Guide JDYX File E19180 up to 15 A; UL
Recognized, Guide JDYX2, File E19180, 18-30 A; CSA Certified,
Class 1422-01 and 1422-30, File 53787, RoHS compliant, CE
Features
Catalog no. (amps)*
AGC-1/20-R
AGC-3/4-R
AGC-5-R
AGC-15-R
AGC-1/10-R
AGC-1-R
AGC-6-R
AGC-20-R
AGC-1/8-R
AGC-1-1/4-R
AGC-7-R
AGC-25-R
AGC-3/16-R
AGC-1-1/2-R
AGC-7-1/2-R
AGC-30-R
AGC-2/10-R
AGC-2-R
AGC-8-R
AGC-35-R
AGC-1/4-R
AGC-2-1/4-R
AGC-9-R
AGC-40-R
AGC-3/10-R
AGC-2-1/2-R
AGC-10-R
AGC-3/8-R
AGC-3-R
AGC-12-R
AGC-1/2-R
AGC-4-R
AGC-14-R
* To order axial leads, place “V” in catalog number. E.g., AGC-V-1/10-R.
•
Ceramic body allows for higher amp/volt rating combinations
Typical applications
•
Electronic circuits
Catalog no. (amps)
ABC-1/4-R
ABC-2-R
ABC-6-R
ABC-15-R
ABC-1/2-R
ABC-2-1/2-R
ABC-7-R
ABC-18-R
ABC-3/4-R
ABC-3-R
ABC-8-R
ABC-20-R
ABC-1-R
ABC-4-R
ABC-10-R
ABC-25-R
ABC-1-1/2-R
ABC-5-R
ABC-12-R
ABC-30-R
* To order axial leads, place “V” in catalog number. E.g., ABC-V-7-R.
Data sheet no. 2543
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 2000
Eaton.com/bussmannseries
3-9
3 — Electronic, PCB and small dimension fuses
GBB ferrule and GBB-V axial lead very-fast-acting
1/4" x 1-1/4˝ ceramic tube fuses
MDL ferrule and MDL-V axial lead time-delay
1/4" x 1-1/4˝ glass tube fuses
Ratings
Ratings
2011/65/EU
2011/65/EU
Volts
•
Volts 250 Vac/125 Vdc
•
Amps 1-30 A
•
250 Vac (1/16-8 A)
•
IR
•
32 Vac (9-30 A)
•
32 Vdc (self certified)
•
•
200 A @ 250 Vac
•
200 A (20-30 A @ 125 Vac/dc)
•
Amps 1/16-30 A
•
10 kA (1-15 A @ 125 Vac/dc)
•
IR*
Agency information
•
UL Recognized, Std. 248-14, Guide JFHR2, File E56412,
CSA Component Acceptance Class 1422-30, File 53787,
RoHS complaint, CE
Features
•
Very fast-acting performance allows protection of highly sensitive
electronic circuitry
Typical applications
•
•
GBB-8-R
100 A (11/4-3 A @ 250 Vac)
•
200 A (4-8 A @ 250 Vac)
•
10000 A (1/16-8 A @ 125 Vac)
•
1000 A (9-30 A @ 32 Vac)
Agency information
Catalog no. (amps)*
GBB-4-R
35 A (1/16-1 A @ 250 Vac)
•
* Interrupting ratings were measured at 70% – 80% power factor on AC, and at a
time constant described in UL 198L.
Electronic circuits
GBB-1-R
•
UL Listed, Guide JDYX, File E19180 up to 8 A; CSA Certified Class
1422-01 up to 8 A; UL Recognized, Guide JDYX2, File E19180,
9-30 A; CSA Component Acceptance, Class 1422-30, 9-30 A, RoHS
compliant, CE
GBB-15-R
Features
•
GBB-1-1/4-R
GBB-5-R
GBB-9-R
GBB-20-R
GBB-2-R
GBB-6-R
GBB-10-R
GBB-25-R
GBB-3-R
GBB-7-R
GBB-12-R
GBB-30-R
* To order axial leads, place “V” in catalog number. E.g., GBB-V-10-R.
Time-delay allows close sizing on inductive circuits
Typical applications
•
Electronic circuits
Catalog no. (amps)*
MDL-1/16-R
MDL-1/2-R
MDL-3-R
MDL-10-R
MDL-1/10-R
MDL-3/4-R
MDL-3-2/10-R
MDL-12-R
MDL-1/8-R
MDL-1-R
MDL-4-R
MDL-15-R
MDL-2/10-R
MDL-1-1/4-R
MDL-5-R
MDL-20-R
MDL-3/16-R
MDL-1-1/2-R
MDL-6-R
MDL-25**
MDL-1/4-R
MDL-2-R
MDL-7-R
MDL-30**
MDL-3/10-R
MDL-2-1/4-R
MDL-8-R
MDL-3/8-R
MDL-2-1/2-R
MDL-9-R
* To order axial leads, place “V” in catalog number. E.g., MDL-V-3-R.
** RoHS compliant construction not available.
Data sheet no. 2013
3-10
Data sheet no. 2004
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Electronic, PCB and small dimension fuses — 3
MDQ ferrule and MDQ-V axial lead dual-element,
time-delay 1/4" x 1-1/4˝ glass tube fuses
MDA ferrule and MDA-V axial lead time-delay
1/4" x 1-1/4˝ ceramic tube fuses
Ratings
Ratings
•
•
Volts
•
250 Vac (1/100-7 A)
•
250 Vac (or less)
•
32 Vac (7-1/2 to 15 A)
•
125 Vdc (20-30 A)
•
32 Vdc (self certified)
•
32 Vdc (self certified)
Amps 1/100-15 A
•
Amps 1/4-30 A
IR
•
IR**
•
35 A (1/100-1 A @ 250 Vac)
•
35 A (1/4 to 1 A @ 250 Vac)
•
100 A (1-1/4 to 3 A @ 250 Vac)
•
100 A (1-1/2 to 2 A @ 250 Vac)
•
200 A (4-7 A @ 250 Vac)
•
200 A (2-1/2 to 10 A @ 250 Vac)
•
1000 A (7-1/2 to 12 A @ 32 Vac)
•
750 A (12-15 A @ 250 Vac)
•
1500 A (20-30 A @ 250 Vac)
•
10 kA (1/4-30 A @ 125 Vac)
•
10 kA (20-30 A @ 125 Vdc)
UL Listed, Std. 248-14, Guide JDYX, File E19180 1/16-7 A, CSA
Component Acceptance, Class 1422-01, File 47233 1/16 -15 A, UL
Recognized, Guide JDYX2, File E19180, 7-1/2-15 A.
Features
•
** Interrupting ratings were measured at 70% – 80% power factor on AC, and at a
time constant described in UL 248.
Agency information
Dual-element design allows closer sizing to inductive circuits than
any other fuses
•
Typical applications
•
2011/65/EU
•
Agency information
•
Volts
Electronic, PCB, small
dimension fuses
•
Electronic relay and control circuits
UL Listed, Std. 248-14, Guide JDYX, File E19180 up to 20 A,
CSA Certified, Class 1422-01, File 53787 up to 20 A.
UL Recognized, Guide JDYX2, File E19180, 25-30 A, CSA
Component Acceptance, Class 1422-30, 25-30 A, RoHS compliant,
CE
Features
Catalog no. (amps)*
MDQ-1/100
MDQ-3/10
MDQ-1-1/2
MDQ-5
MDQ-1/32
MDQ-3/8
MDQ-1-6/10
MDQ-6
MDQ-1/16
MDQ-4/10
MDQ-1-8/10
MDQ-6-1/4
MDQ-1/10
MDQ-1/2
MDQ-2
MDQ-7
•
Ceramic body for higher amp/volt ratings
•
Inventory consolidation by replacing MDL fuses allows for reduced
SKU investment and minimizing potential for misapplying fuse
Typical applications
MDQ-1/8
MDQ-6/10
MDQ-2-1/4
MDQ-7-1/2
MDQ-15/100
MDQ-3/4
MDQ-2-1/2
MDQ-8
MDQ-175/1000
MDQ-8/10
MDQ-2-8/10
MDQ-9
MDQ-3/16
MDQ-1
MDQ-3
MDQ-10
MDA-1/4-R
MDA-2-R
MDA-6-R
MDA-15-R
MDA-1/2-R
MDA-2-1/2-R
MDA-7-R
MDA-20-R
MDQ-2/10
MDQ-1-2/10
MDQ-3-2/10
MDQ-12
MDQ-1/4
MDQ-1-1/4
MDQ-4
MDQ-15
* To order axial leads, place “V” in catalog number. E.g., MDQ-V-1-1/4.
•
Electronic circuits
Catalog no. (amps)*
MDA-3/4-R
MDA-3-R
MDA-8-R
MDA-25 A-R
MDA-1-R
MDA-4-R
MDA-10-R
MDA-30 A-R
MDA-1-1 /2-R
MDA-5-R
MDA-12-R
* To order axial leads, place “V” in catalog number. E.g., MDA-V-1-1/2-R.
Data sheet no. 2044
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 2002
Eaton.com/bussmannseries
3-11
3 — Electronic, PCB and small dimension fuses
H15-V vertical mount 5 mm fuse
holder with threaded cap
H15-H horizontal mount 5 mm
fuse holder with threaded cap
2011/65/EU
Ratings
HTC-60M four-leg stand-off
mount 5 mm fuse holder
2011/65/EU
Ratings
2011/65/EU
Ratings
•
Volts 250 Vac
•
Volts 250 Vac
•
Volts 250 Vac
•
Amps 10 A (cURus and VDE)
•
Amps 10 A (cURus) 6.3 A (VDE)
•
Amps 6.3 (cURus and VDE)
•
Temperature rise 41°C
•
Temperature rise 41°C
Agency information
•
•
Agency information
Agency information
cURus Recognized, Guide IZLT2/IZLT8,
File E14853
•
VDE File 40039714
•
Materials
cURus Recognized, Guide IZLT2/IZLT8,
File E14853
VDE File 40039714
Tin-plated clip
•
Tin-plated clip
•
Tin-plated copper terminals
•
Tin-plated copper terminals
•
Thermoplastic body (UL 94V0, glow wire
test: 960°C per IEC 695-2-1)
•
Thermoplastic body (UL 94V0, glow wire
test: 960°C per IEC 695-2-1)
Carton qty.
Catalog no.
Carton qty.
BK-H15-V-1
200
BK-H15-H-1
200
BK1-H15-V-1
1000
BK1-H15-H-1
1000
BK-H15-V-1-B
100 holder body only
BK-H15-H-1-B
100 holder body only
BK-H15-V-1-K
100 holder cap only
BK-H15-H-1-K
100 holder cap only
Dimensions - in (mm)
FU
Printed circuit
board
Mounting holes
0.512
(13)
1.303
(33.1)
SE
FU
SE
0.461
(11.7)
VDE File 4004459
Printed circuit board
Tin-plated brass terminals
Catalog no.
Qty.
HTC-60M
10
BK-HTC-60M
100 (bulk)
Dimensions - in (mm)
Catalog no.
0.512
(13)
•
•
•
1.303
(33.1)
cURus Recognized, Guide IZLT2/IZLT8,
|File E14853
Materials
Materials
Dimensions - in (mm)
•
0.461
(11.7)
0.354
(9)
0.886
(22.5)
0.551
(14)
0.138
(3.5)
Mounting
holes
Ø 0.102 Ø 0.051
(1.3)
(2.6)
Mounting holes
Ø 0.051 ± 0.002 (Typ.)
(1.03 ± 0.05)
0.394 (10.0)
Ø 0.051 ± 0.002 (Typ.)
(1.03 ± 0.05)
0.394 (10.0)
Data sheet no. 4426
3-12
Data sheet no. 4426
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
0.591
(15)
Data sheet no. 2110
Eaton.com/bussmannseries
HBH-I (1/4" x 1-1/4˝) and
HBH-M (5x20 mm) horizontal
mount fuse holders
HBV-I (1/4" x 1-1/4˝) and
HBV-M (5x20 mm) vertical
mount fuse holders with
stability pins
HBW-I (1/4" x 1-1/4˝) and
HBW-M (5x20 mm) vertical
mount fuse holder without
stability pins
Dimensions - in (mm)
Dimensions - in (mm)
Dimensions - in (mm)
0.51
0.51
(13.0)
(13.0)
0.531
0.531
(13.5)
HBW
HBV
(13.5)
1.855
(47.0)
0.2
1.855
(47.0)
(5.0)
0.2
(5.0)
0.04
0.580
(14.9
Ratings
UL 16 A/250 V
•
CSA 12 A/250 V
•
VDE 6.3 A/250 V
•
SEMKO 10 A/250 V
0.1 (2.54) Ø, 4
UL Recognized, Guide IZLT2, File EI4853,
CSA Certified, Class 6225-01, File 47235,
VDE 4009241 (HBV, HBW), SEMKO
800444, CE
(10.0)
0.580
0.05 (1.3) Ø, 2
(14.9
Replacement fuse caps
•
High dielectric molded phenolic with a UL
94V0 flammability rating
FBI and FBM fuse caps fit PCB fuse holders
HBH-_, HBV-_ and HBW-_.
•
Fuse carrier and knob: spring-loaded,
bayonet-type, tin-plated brass with
screwdriver slot
To order, specify Catalog numbers:
Mounting
Agency information
•
0.05 (1.3) Ø, 2
0.4
(1.05)
(10.0)
Material
•
0.04
0.4
(1.05)
•
“Kicked” terminals (all) and stability pins
on HBV and HBW
•
Temperature rating (RTI): body 150ºC,
knob 130ºC
•
FBI for 1/4" diameter fuses
•
FBM for 5 mm diameter fuses
Electrical
•
Insulation resistance 10 MΩ 500 Vdc
•
Contact resistance less than 0.005 Ω @
200mV
•
Dielectric strength over 200 V/mil
FBI
FBM
Data sheet no. 2118
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
3-13
Electronic, PCB, small
dimension fuses
Electronic, PCB and small dimension fuses — 3
3 — Electronic, PCB and small dimension fuses
HTC-15M, HTC-140M 5 mm fuse holder and snapon cover
Ratings
•
1A3399 low profile 5 mm fuseclips with end stops
and straight leads
0.225"
0.125"
250 V / 6.3 A / 1.6 W
2011/65/EU
(5.7mm)
(3.2mm)
0.030"
(1.6mm)
0.060"
0.125"
0.254"
0.188"
(3.2mm)
(1.6mm)
(2.9mm)
Agency information
(1.5mm)
0.062"
0.115"
0.237"
(6.5mm)
(6.0mm)
•
cURus, Guide 1ZLT2 and IZLT8, File E14853
•
VDE 40004458
Catalog no.
Material*
Finish
RoHS compliant
1A3399-01
BeCu
Silver
1A3399-04-R
BeCu
Bright tin
1A3399-10-R
Copper alloy
Bright tin
•
1.047"
0.345"
(26.6mm)
(9.0mm)
2011/65/EU
HTC-140M
Cover
0.571"
(14.5mm)
(4.8mm)
* BeCu recommended for more than 15 A.
0.217 "
(5.5mm)
0.531"
Mounting Holes
(13.5mm)
1A5018 high profile 5 mm fuseclips with end
stops and straight leads
0.890"
(22.60mm)
0.866"
(22.0mm)
_ 0.002" Dia. (Typ.)
0.059" +
0.177"
(1.50 _+ .05mm)
(4.5mm)
0.180"
(4.57mm)
0.440"
Catalog no.
Description
HTC-15M
Holder only
HTC-140M
Holder with natural color cover
HTC-150M*
Holder with transparent cover
0.319"
0.50"
(8.1mm)
(12.7mm)
2011/65/EU
BUSS
BUSS
BUSS
0.61"
0.157"
(3.99mm)
0.929"
0.031"
0.217"
(5.5mm)
Catalog no.
Material*
Finish
1A5018-07
Copper alloy
Silver
1A5018-10-R
Copper alloy
Bright tin
1A5601 5 mm fuseclip (≤ 7 A)
0.246"
2011/65/EU
(8.73mm + 0.38mm)
0.50"
0.50"
0.141" + 0.015"
(12.7mm)
(3.58mm + 0.38mm)
0.022" + 0.002"
0.060"
0.266"
(1.5mm)
(6.75mm)
0.032" + 0.002"
(0.56mm + 0.05mm)
HTC-200M
AP/HTC-200M
Tin-plated bronze
(6.35mm)
0.344" + 0.015"
0.012"
(0.3mm)
Material
0.250"
(6.3mm)
(8.73mm + 0.38mm)
(12.7mm)
Catalog no.
(5.84mm)
(4.6mm)
0.344" + 0.015"
(23.6mm)
(15.5mm)
(0.79mm)
0.230"
0.180"
(3.7mm)
* BeCu 1A3399 fuseclips recommended for more than 15 A.
HTC-200M 5 mm fuseclip
0.177"
0.140"
0.047"
(1.2mm)
* Available in bulk only, order BK/HTC-150M.
(4.5mm)
2011/65/EU
(11.2mm)
Description
Tape and fan fold pack
Ammo pack 1000 pieces per box
(0.81mm + 0.05mm)
Catalog no.
Material
Finish
1A5601
Cartridge brass
Bright tin
1A5602 fuseclip with end stops (≤ 7 A)
HTC-210M 5 mm fuseclip with end stops
0.219"
(5.57mm)
4.32mm
2.54mm
6.26mm
8.73mm
2.85mm
Catalog no.
HTC-210M
AP/HTC-210M
Material
Tin-plated bronze
Data sheet no. 2110
3-14
2.29mm
0.500"
0.250"
(12.70mm)
2.54mm
(6.35mm)
0.140"
(3.56mm)
0.093"
3.91mm
6.22mm
2011/65/EU
2011/65/EU
1.46mm
0.216"
(5.48mm)
2.54mm
Description
Tape and fan fold pack
Ammo pack 1000 pieces per box
(2.36mm)
LEGS TO FIT
IN 0.052" (1.3mm) DIA.
HOLES ON CENTER
0.047"
(1.19mm)
Catalog no.
Material
Finish
1A5602
Cartridge brass
Bright tin
Data sheet no. 2131
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Electronic, PCB and small dimension fuses — 3
1A1119 1/4" fuseclips with end stops and angledin leads
0.285" (7.24mm)
2011/65/EU
0.420" (10.67mm)
1A3398 PCB 1/4" fuseclips without end stops
with straight leads
(6.5mm)
2011/65/EU
0.245"
0.255"
(6.2mm)
0.155"
(3.94mm)
0.41"
(10.4mm)
0.28"
0.102" Dia.
0.250" (6.5mm)
0.290" (7.4mm)
0.360" (9.14mm)
0.155" (3.9mm)
0.080" (2.03mm)
0.06"
(1.5mm)
0.32"
0.14"
(7.1mm)
(2.6mm)
0.280"
(3.6mm) (7.1mm)
Material*
Finish
Catalog no.
Material
Finish
1A1119-04-R
1A1119-05
High performance copper
Bright tin
1A3398-07-R
Cartridge brass
Bright tin
High performance copper
Silver
1A1119-10-R
Cartridge brass
Bright tin
* High performance copper recommended for more than 15 A.
1A1120 1/4" fuseclips without end stops or
angled-in leads
0.272”
[6.91]
0.250”
[6.35]
0.245"
2011/65/EU
2011/65/EU
(6.2mm)
0.155"
C
L
Ø 0.130”±.003
[3.3mm±0.08]
0.255"
(6.5mm)
0.290”±.010
[7.37±0.25]
0.060"
0.228"
0.150"
(3.81mm)
(1.5mm)
0.363”±.003
[9.22±0.08]
Material*
(2.6mm)
(10.4mm)
0.187”
[4.75] 0.312”
[7.92]
0.155”±.010
[3.94±0.25]
0.102"
(3.94mm)
0.410"
0.400”±.010
[10.16±0.25]
0.080”
[2.03]
0.320”
[8.13]
Catalog no.
1A4533 1/4" fuseclips without end stops or
angled out leads
(5.79mm)
0.323"
0.280"
0.320"
(7.11mm)
(8.13mm)
(8.20mm)
Finish
Catalog no.
Material*
Finish
1A4533-01-R
High performance copper
Bright tin
1A4533-06-R
Cartridge brass
Bright tin
1A1120-02
Cartridge brass
None/bright dipped
1A1120-05
High performance copper
Silver
1A1120-06-R
High performance copper
Bright tin
1A1120-09-R
Cartridge brass
Bright tin
* High performance copper recommended for more than 15 A.
* High performance copper recommended for more than 15 A.
1A1907 1/4" fuseclips with end stops and straight
leads
0.245"
0.255"
(6.5mm)
(6.2mm)
0.410"
(10.4mm)
0.060"
(1.5mm)
0.320"
(2.6mm)
2011/65/EU
0.245"
(3.94mm)
0.102" Dia.
0.140" 0.280"
2011/65/EU
0.155"
1A4534 1/4" fuseclips with end stops and angled
out leads
(6.2mm)
0.155"
(3.94mm)
0.410"
0.280"
(10.4mm)
(7.1mm)
0.255"
(3.6mm) (7.1mm)
(6.5mm)
(8.13mm)
0.06"
0.226"
0.150"
(3.81mm)
(1.5mm)
Catalog no.
Material*
Finish
1A1907-02
Cartridge brass
None/bright dipped
1A1907-03-R
High performance copper
Bright tin
1A1907-05
High performance copper
Silver
1A1907-06-R
Cartridge brass
Bright tin
(5.74mm)
0.321"
0.32"
(8.13mm)
0.102"
(2.6mm)
0.28"
(7.11mm)
(8.15mm)
Catalog no.
Material*
Finish
1A4534-01-R
High performance copper
Bright tin
1A4534-06-R
Cartridge brass
Bright tin
* High performance copper recommended for more than 15 A.
* High performance copper recommended for more than 15 A.
Data sheet no. 2131
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
3-15
Electronic, PCB, small
dimension fuses
(8.13mm)
Catalog no.
3 — Electronic, PCB and small dimension fuses
5681 and 5682 1/4" fuseclips with mounting holes
ØF
0.470"
ØF
D
C
B
(11.94mm)
End
stop
C
0.080"
BeCu
5682-01
Finish
B
C
D
E
ØF
Ref.
Silver
†
0.265
0.41
0.32
0.132
Fig. 1
0.262
0.41
0.32
0.132
Fig. 2
5682-11-R
0.108
BeCu
Silver
BeCu
Bright tin
0.131
(3.61mm)
1A3400-09 and 1A3400-10
Catalog no.
Clip mat.
Finish
1A3400-09-R
Copper-clad steel
Bright tin
20
1A3400-10-R
Copper-clad steel
Silver
30
Data sheet no. 2131
0.106
† Hole in center of both clip and contact area.
Data sheet no. 2132
5674 PCB fuseclips with mounting holes for 9/32˝ dia. fuses
ØF
B
End
stop
C
D
2011/65/EU
E
Figure 1
Catalog no.
Dimensions - in
Clip
mat.
Finish
B
C
D
E
ØF
Ref.
0.38
0.172
Fig. 1
With end stop
5674-01
5674-10
Silver
BeCu
0.168 0.356 0.52
Bright tin
Data sheet no. 2132
5960 PCB fuseclips with mounting holes for 13/32˝ dia. fuses
ØF
B
C
End
stop
2011/65/EU
D
E
Figure 1
Catalog no.
Clip
mat.
Dimensions - in
Finish
B
C
D
E
0.387
0.71
0.47
ØF
Ref.
With end stop
5960-07
5960-09
BeCu
0.168
Silver
0.2
0.196
0.172
Fig. 1
Data sheet no. 2132
5592 PCB fuseclips with mounting holes for 9/16˝ dia. fuses
ØF
2011/65/EU
D
C
E
Figure 1
Catalog no.
Clip
mat.
Dimensions - in
Finish
B
C
D
E
ØF
Ref.
Silver
0.252
0.56
0.875
0.6
0.2
Fig. 1
Without end stop
5592-01
BeCu
Data sheet no. 2132
3-16
2011/65/EU
0.142" Dia.
(9.65mm)
0.470"
(11.94mm)
With end stop
5682-02
0.380"
(2.03mm)
Figure 2
Dimensions - in
Clip
mat.
(1.27mm)(11.1mm)
0.218"
(5.54mm)
Without end stop
5681-01
(18.03mm)
E
Figure 1
0.050" 0.437"
0.710"
2011/65/EU
D
E
Catalog no.
1A3400 fuseclips with end stops and straight leads for
13/32˝ dia. fuses
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Max amps
High speed fuses — 4
Contents
Fuses
Accessories
British Standard BS88 fuses
Volts
Amp range
Catalog symbol/size
500 Vac/dc
50 to 400
CHSF
3
600 Vac/450 Vdc
1 to 600
DFJ
4
130 Vac/dc
150 Vac/dc
250 Vac/dc
500 Vac/dc
600 Vac
600 Vac
700 Vac/dc
1000 Vac/800 Vdc
Modular fuse blocks
1000 to 4000
70 to 1000
35 to 2500
35 to 1600
1 to 1000
35 to 800
5 to 1200
35 to 2000
FWA
FWA
FWX
FWH
KAC
KBC
FWP
FWJ
5
6
7
8
9
10
11-12
13
14
LCT, LET
LMT, LMMT
CT, ET, FE, EET and FEE
FM, FMM, MT and MMT
15
16
17-18
19-20
21
240-250-280 Vac/150 Vdc
6 to 180
240-250 Vac/150 Vdc
160 to 900
690-700 Vac/500 Vdc
6 to 200
690-700 Vac/350-450-500 Vdc
160 to 710
Trip indicators, clips and microswitches
Fuses
Accessories
Section page
Continued next page
Lead the charge with compact designs
Bussmann series 50-400 amp compact
high speed fuses use up to 48% less
enclosure space
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-1
High speed fuses
Fuse type
Compact high speed fuses
Fuses
UL Class J full range drive fuse
Fuses
North American fuses
4 — High speed fuses
Contents
Fuse type
Ferrule
Fuses
Accessories
Volts
Amp range
Catalog symbol/size
150 Vac/dc
5 to 30
FWA-_A10F (10x38mm)
150 Vac/dc
35 to 60
FWA-_A21F (21x51mm)
250 Vac/dc
1 to 50
FWX (14x51mm)
500 Vac
0.25 to 30
FWH-_A6F (6x32mm)
500 Vac/dc
1 to 30
FWH-_14F (14x51mm)
600-700 Vac/700 Vdc
1 to 32
FWC (10x38mm)
690 Vac
4 to 32
FWP-_G10F (10x38mm)
690-700 Vac/600-700 Vdc
1 to 50
FWP-_A14F (14x51mm)
690 Vac
4 to 50
FWP-_G14F_ (14x51mm)
700 Vac/dc
20 to 100
FWP-_A22F (22x58mm)
690 Vac
20 to 100
FWP-_G22F_ (22x58mm)
750 Vdc
5 to 30
FWK-_A20F (20x127mm)
750 Vdc
35-60
FWK-_A25F (25x146mm)
1000 Vac/800 Vdc
20 to 30
FWJ (14x67mm)
1200 Vac/1000 Vdc
20 to 30
FWL (20x127mm)
1400-2000 Vac/1000 Vdc
2 to 15
FWS (20x127mm)
J70032 700 V panel mount block for FWP 14x51mm fuses
JM70100 700 V DIN-Rail/panel mount modular blocks for FWP 22x58mm fuses
CHM modular holders for FWA and FWC 10x38mm fuses
CH14 modular holders for FWX, FWH and FWP 14x51mm fuses
CH22 modular holders for FWP 22x58mm fuses
Section page
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Square body
DIN 43653
DIN 43620
French style
US style
Flush-end contact
Accessories
690-700 Vac/ 700 Vdc
690-700 Vac
1000 Vac
1000 Vac
1250-1300 Vac
690 Vac
10 to 400
40 to 2000
20 to 315
50 to 1400
50 to 1400
10 to 800
690-700 Vac
10 to 1600
1000 Vac
690-700 Vac
690-700 Vac
1000 Vac
1250-1300 Vac
690 Vac
690-700 Vac
1000 Vac
1250-1300 Vac
690-700 Vac
1000 Vac
1250 Vac
660 Vac
1250 Vac
690 Vac
1000 Vac
Fixed center blocks for DIN 43653 fuses
Indicators
Microswitches
20 to 225
40 to 1600
40 to 2000
50 to 1400
50 to 1400
25 to 400
40 to 2000
50 to 1400
50 to 1400
1000 to 4000
1000 to 3000
800 to 2500
1000 to 4000
630 to 2800
2000 to 7500
2000 to 5000
170M — size 000 and 00
170M — size 1* to 3
170M — size 00
170M — size 1* to 3
170M — size 1* to 3
170M — size 00 to 3
170M — size 000 to 3
dual indicator
170M — size 00
170M — size 1* to 3
170M — size 1* to 3
170M — size 1* to 3
170M — size 1* to 3
170M — size 00
170M — size 1* to 3
170M — size 1* to 3
170M — size 1* to 3
170M — size 4
170M — size 4
170M — size 4
170M — size 23
170M — size 23
170M — size 24
170M — size 24
750-800 Vdc
1000 Vdc
25 to 630
25 to 500
170M — size 000 and 230
170M — size 000 and 230
38-39
40-41
42
43-44
45-46
47-48
49-50
51
52-53
54-55
56-57
58-59
60
61-62
63-64
65-66
67-68
69
70
71-72
73
74
75
76-77
78
78
IGBT fuses
Fuses
4-2
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
79-80
81-82
High speed fuses — 4
CHSF — UL compact high speed fuse
Features
500 Vac/dc (UL), 50 to 400 A
•
Requires up to 48% less enclosure space to help reduce the
overall assembly size
•
Innovative design allows for a significantly smaller package without
compromising heat rise performance, preventing extensive
equipment redesign
•
Global acceptance with UL, CSA, IEC and RoHS for products sold
worldwide
Ratings
•
Bolt-on design provides design flexibility for installation in fuse
blocks or direct mounting on busbars
Volts
•
Meets JASO D622 spec for thermal shock, humidity, and vibration
•
Superior current cycling performance helps withstand demanding
applications
2011/65/EU
Bussmann™ series compact
high speed fuses feature spacesaving case sizes for protecting
semiconductor devices up to 500
Vac/dc in ratings from 50 to 400
amps.
•
500 Vac/dc (UL)
•
Amps 50-400 A
•
Interrupting rating
Recommended fuse blocks
•
Max AC – 200 kA
•
Min AC 400%
•
Max DC – 50 kA
•
Min DC 800%
Up to 100 amps
Catalog no.
AWG wire size
Stud size
BH-0111
14-2/0 Cu
1/4-20
BH-0112
14-2/0 Cu
5/16-18
BH-0121
(2) 14-1/0 Cu
1/4-20
BH-0122
(2) 14-1/0 Cu
5/16-18
1BS101
14-2/0 Cu
1/4-20 x 1/2
See data sheet no. 1200 (BH-01_) and 1206 (1BS101) for details.
Operating class aR
Agency information
Up to 400 amps
•
UL Recognized, Guide JFHR2, File E56412
•
CSA Component Acceptance, Class 1422-30, File 53787
•
IEC aR (self certified)
•
RoHS compliant
•
CE
Catalog no.
AWG wire size
Stud size
BH-1131
6-250kcmil Cu
1/4-20
BH-1132
6-250kcmil Cu
5/16-18
1BS102
6-250kcmil Cu
1/4-20 x 1/2
See data sheet no. 1201 (BH-11_) and 1207 (1BS102) for details.
Watts loss / percent of rated current
Catalog no.
CHSF-50
CHSF-60
CHSF-70
CHSF-80
CHSF-100
CHSF-125
CHSF-150
Amps
50
60
70
80
100
125
150
CHSF-175
CHSF-200
CHSF-225
CHSF-250
CHSF-300
CHSF-350
CHSF-400
AC/DC I2t (A2s)
pre-arcing
304
438
596
778
1216
2042
2941
175
200
225
250
300
350
400
AC* I2t (A2s)
total clear
1875
2700
3675
4800
7500
12,721
18,318
DC** I2t (A2s)
total clear
935
1346
1833
2394
3740
6465
9309
24,933
32,566
48,028
59,293
85, 382
116,215
151,791
12,671
16,550
21,278
26,270
37,828
51,488
67,250
4003
5228
6835
8438
12,151
16,539
21,603
* @ 200 kA/500 Vac.
** @ 50 kA/500 Vdc.
A
81
92
92
@ 50%
3.8
4.5
5.3
6.1
7.6
12.0
14.3
1.3
1.5
1.8
2.0
2.5
3.6
4.3
16.7
19.1
26.1
29.0
34.8
40.6
46.4
5.1
5.8
7.0
7.8
9.4
10.9
12.5
H
A
G
Dimensions — mm
Amps
50-100
125-200
225-400
@ 80%
B
20
25
30
C
40
53
53
D1
61
77
74
D2
57
68
68
E
8.7
8.7
8.7
F
16
19
25
G
7.7
7.8
9.0
H
3.2
3.2
4.8
C
E
F
B
D2
D1
Data sheet no. 10414
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-3
High speed fuses
•
4 — High speed fuses
DFJ — UL Class J full range high speed fuse
600 Vac/450 Vdc (UL), 1 to 600 A
UL Class J high speed, full range current-limiting fuses provide
maximum protection for AC and DC drives and controllers. The
UL Class J Bussmann series DFJ fuse has the lowest I2t of any
branch circuit fuse to protect power semiconductor devices that
utilize diodes, GTOs, SCRs and SSRs. The DFJ fuse combines the
performance of high speed fuses in a full range Class J branch
circuit package, allowing the use of readily available Class J fuse
blocks, holders and switches. The DFJ uses standard Class J holders
and blocks. See section 8 for available catalog numbers.
Ratings
•
Volts
•
600 Vac (UL)
•
450 Vdc (UL 15-600 A)
Catalog
no.
I2t (A2Sec) @ 600 Vac/100 kA
Amps
Pre-arc
Clearing
Watts loss*
•
Amps 1-600 A
DFJ-1
1
—
—
—
•
IR
DFJ-2
2
—
—
—
•
200 kA RMS Sym.
DFJ-3
3
—
—
—
•
100 kA DC
DFJ-4
4
—
—
—
DFJ-5
5
—
—
—
Operating class gR
Agency information
DFJ-6
6
—
—
—
DFJ-8
8
—
—
—
DFJ-10
10
—
—
—
•
UL Listed, Std 248-8, Class J, Guide JDDZ, File E4273
DFJ-12
12
—
—
—
•
CSA Certified, C22-2 No 248.8, Class 1422-02, File 53787
DFJ-15
15
4
110
4.1
•
CE
DFJ-17.5
17.5
—
—
—
DFJ-20
20
8
365
4.0
DFJ-25
25
12
610
4.9
DFJ-30
30
20
1000
5.5
Dimensions — in
2.38
2.25
0.50
0.63
0.81
1 to 30A
1.06
35 to 60A
4.63
3.63
1.13
0.75
2.63
1
0.43
0.28
.13
70 to 100A
5.75
4.38
1.13
0.28
3.0
1.63
1.38
0.43
0.19
110 to 200A
7.13
5.25
3.38
0.41
1.63
0.58
2.11
1.88
0.25
225 to 400A
55
1100
6.8
90
1900
8.6
DFJ-50
50
140
2800
8.7
DFJ-60
60
290
6000
8.5
DFJ-70
70
450
3100
12
DFJ-80
80
650
4600
13
DFJ-90
90
1010
7200
13
DFJ-100
100
1460
10,500
13
DFJ-110
110
1710
9500
17
DFJ-125
125
3580
20,000
15
DFJ-150
150
5080
28,000
19
DFJ-175
175
6310
35,000
23
DFJ-200
200
9850
54,500
24
DFJ-225
225
11,420
51,000
29
DFJ-250
250
17,000
74,500
30
DFJ-300
300
23,500
103,000
36
8.0
DFJ-350
350
38,800
170,000
39
DFJ-400
400
62,200
272,000
40
DFJ-450
450
44,600
270,000
56
DFJ-500
500
79,500
480,000
52
DFJ-600
600
138,000
830,000
57
0.53
2.13
450 to 600A
Data sheet no. 1048
4-4
35
40
6.0
3.75
2
0.74
DFJ-35
DFJ-40
2.5
0.38
† Watts loss at rated current.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
FWA — North American
130 Vac/dc (UL), 1000 to 4000 A
North American style flush-end high speed fuses for the protection
of DC common bus, DC drives, power converters/rectifiers and
reduced rated voltage starters.
Ratings
•
Volts 130 Vac/dc
•
Amps 1000-4000 A
•
IR
•
200 kA RMS Sym at 130 Vac
•
50 kA at 130 Vdc
•
UL Recognized, JFHR2, E91958 on 1000-2000 A fuses
•
CE
I²t (A²s)
Rated voltage
130 Vac/dc (UL)
Rated current (amps)
1000
1200
1500
2000
2500
3000
4000
Pre-arcing
170,000
270,000
520,000
860,000
1,500,000
2,100,000
3,400,000
Clearing at 130 Vac
460,000
730,000
1,400,000
2,400,000
4,100,000
5,700,000
9,200,000
Watts loss (W)†
60
70
78
108
130
150
257
Catalog no.
FWA-1000AH
FWA-1200AH
FWA-1500AH
FWA-2000AH
FWA-2500AH
FWA-3000AH
FWA-4000AH
† Watts loss at rated current.
Dimensions — in
4000 A
1000-3000 A
Amp range
1000 to 2000
2500 to 3000
4000
B
2.0
3.0
3.5
C
1.0
1.5
1.5
D
—
—
1.5
Thread / depth
3/8-24 x 1/2” UNF
1/2-20 x 1/2” UNF
1/2-20 x 1/2” UNF
1” = 25.4mm
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 720001, 5785301
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-5
High speed fuses
Agency information
4 — High speed fuses
FWA — North American
150 Vac/dc (UL), 70 to 1000 A
North American style bolted tag high speed fuses used for the
protection of DC common bus, DC drives, power converters /
rectifiers and reduced rated voltage starters.
Ratings
Volts
•
•
150 Vac/dc (UL)
•
80 Vdc 1000 A only
•
Amps 70-1000 A
•
IR
•
100 kA RMS Sym. (70-400 A)
•
200 kA RMS Sym. (450-1000 A)
•
20 kA at 150 Vdc (70-800 A)
•
100 kA at 80 Vdc (70-1000 A)
Agency information
•
UL Recognized JFHR2, E91958
•
CE
I²t (A²s)
Rated voltage
Rated current (amps)
70
80
100
125
150
200
250
300
350
400
500
600
700
800
1000
150 Vac/dc (UL)
80 Vdc
Pre-arcing
470
670
1200
1870
2700
4780
7470
10,760
15,700
20,300
39,000
46,000
75,000
92,000
170,000
Clearing at 150 Vac
4000
6000
12,000
18,000
26,000
45,000
70,000
100,000
140,000
180,000
120,000
140,000
220,000
280,000
510,000
Watts loss (W)†
6.9
7.7
9.0
11.2
13.5
17.6
22.5
27.0
30.6
35.2
35.0
47.0
49.0
58.0
60.0
Catalog no.
FWA-70B
FWA-80B
FWA-100B
FWA-125B
FWA-150B
FWA-200B
FWA-250B
FWA-300B
FWA-350B
FWA-400B
FWA-500A
FWA-600A
FWA-700A
FWA-800A
FWA-1000A
† Watts loss at rated current.
Dimensions — mm
24.21 Ø
11.24
88.3
19.4
31.8
6.35
19.05
8.95
25.4
28.36
3.24
49.06
65.75
11.0
48.7
38.5 Ø
65.5
70-400 A
500-1000 A
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 720002, 5785310
4-6
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
FWX — North American
250 Vac/dc (UL), 35 to 2500 A
North American style bolted tags and flush-end high speed fuses
for the protection of DC common bus, DC drives, power converters/
rectifiers and reduced rated voltage starters.
Ratings
•
Volts 250 Vac/dc (UL)
•
Amps 35-2500 A
•
IR
200 kA RMS Sym.
•
20 kA at 250 Vdc (35-800 A)
Rated
voltage
Agency information
•
UL Recognized, JFHR2, E56412
•
CSA Class 1422-30, (53787) on 35-800 A fuses (20 kA IR at 250
Vdc)
•
CE
Dimensions — in
A
D
E
C
H
G F
B
J
250 Vac/dc
(UL)
35-800 A
A
A
D
C
B
C
B
1000-1200 A
1500-2500 A
Amp
range
35-60
Thread
A
B
C
D
E
F
G
H
J
/ depth
3.19 0.81 1.59 2.59 2.25 0.34 0.63 0.13 0.52
—
70-200
3.13
1.22 1.59 2.44 2.19 0.34 1.00 0.19 0.47
225-600
3.84
1.50 1.59 2.94 2.25 0.41 1.00 0.25 0.75
—
700-800
3.84 2.00 1.59 3.03 2.28 0.41 1.50 0.25 0.78
—
1000-1200
2.59 3.00 1.50
—
—
—
—
—
—
1500-2500
2.59 3.50 1.50
1.50
—
—
—
—
—
Rated
current
(amps)
35
40
45
50
60
70
80
90
100
125
150
175
200
225
250
275
300
350
400
450
500
600
700
800
1000
1200
1500
1600
2000
2500
Prearcing
50
60
80
100
140
330
430
570
740
1130
1620
2170
2790
3210
3960
4720
6000
10,600
14,500
22,100
28,000
41,100
48,800
59,000
44,000
92,000
120,000
160,000
320,000
670,000
Clearing
at 250
Vac
230
310
390
520
740
1400
1850
2450
3150
4850
6950
9300
12,000
14,700
18,100
21,600
27,300
48,600
66,100
101,000
128,000
188,000
190,000
230,000
360,000
750,000
880,000
1,200,000
2,300,000
4,700,000
Watts
loss
(W)†
4.2
5.2
5.7
6.0
8.1
7.2
8.1
9.0
10.0
12.5
15.7
18.5
22.0
24.0
27.0
31.0
32.0
39.0
44.0
49.0
54.0
62.0
72.0
84.0
100.0
103.0
140.0
140.0
151.0
163.0
Catalog no.
FWX-35A
FWX-40A
FWX-45A
FWX-50A
FWX-60A
FWX-70A
FWX-80A
FWX-90A
FWX-100A
FWX-125A
FWX-150A
FWX-175A
FWX-200A
FWX-225A
FWX-250A
FWX-275A
FWX-300A
FWX-350A
FWX-400A
FWX-450A
FWX-500A
FWX-600A
FWX-700A
FWX-800A
FWX-1000AH
FWX-1200AH
FWX-1500AH
FWX-1600AH
FWX-2000AH
FWX-2500AH
† Watts loss at rated current.
—
3/8-24
x 1/2”
UNF
1” = 25.4mm
For details on electrical characteristics, contact Application Engineering and ask for data sheets:720005, 359 (35-800 A), 5785299 (100-2500 A)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-7
High speed fuses
I²t (A²s)
•
4 — High speed fuses
FWH — North American
500 Vac/dc (UL), 35 to 1600 A
North American style bolted tags high speed fuses, for the protection
of DC common bus, power converters/rectifiers and reduced rated
voltage starters.
Ratings
•
Volts
•
500 Vac (UL)
•
500 Vdc (35-800 A only)
•
Amps 35-1600 A
•
IR
•
200 kA RMS Sym.
•
50 kA at 500 Vdc
I²t (A²s)
Agency information
•
UL Recognized, JFHR2, E91958, FWH-_B (35-200 A) and FWH-_A
(1000 and 1200 A), JFHR2, E56412 FWH-_A (225-800 A)
•
CSA Class 1422-30, File 53787 (35-1600 A)
•
CE
Dimensions — in
A
D
E
C
H
G F
B
J
35-1200 A
10.22
8.97
8.71
6.22
5.22
4.25 Ø
1.75
3.5
1.625
3.22
Rated
current
Rated voltage (amps)
35
40
45
50
60
70
80
500 Vac/dc (UL)
90
100
125
150
175
200
225
250
275
300
325
350
500 Vac/dc (UL)
400
450
0.625
0.75
1400-1600 A
Amp range
35-60
70-100
125-200
225-400
A
3.19
3.62
3.62
4.34
B
0.81
0.95
1.16
1.50
C
1.59
1.74
1.84
2.09
450-600
4.34 2.00 2.09
700-800
6.34 2.50 2.09
1000-1200
6.97 3.00 3.22
1400-1600
1” = 25.4mm
D
2.54
2.85
2.89
3.44
E
2.19
2.81
2.77
2.75
F
0.34
0.35
0.34
0.41
G
0.72
0.75
1.00
1.00
H
0.13
0.13
0.19
0.25
J
0.52
0.38
0.41
0.75
3.53
4.97
5.47
Refer
2.78 0.41 1.50 0.25 0.78
3.44 0.53 2.00 0.38 1.30
4.48 0.62 2.38 0.44 1.12
to drawing
500 Vac (UL)
500
600
700
800
1000
1200
1400
1600
Prearcing
34
76
105
135
210
210
305
360
475
800
1100
1450
1900
4600
6300
7900
9800
13,700
14,500
19,200
24,700
Clearing
at 500
Vac
150
320
450
670
900
900
1400
1600
2000
3500
4600
6200
8500
23,300
32,200
40,300
49,800
63,800
72,900
96,700
127,000
29,200
149,000
41,300
206,000
55,000
298,000
76,200
409,000
92,000
450,000
122,000
600,000
200,000 1,000,000
290,000 1,400,000
Watts
loss
(W)†
8.0
7.5
7.5
7.5
9.9
10.6
12.7
15.0
17.0
25.0
30.0
35.0
40.0
39.0
41.0
46.0
51.0
53.0
58.0
65.0
74.0
Catalog no.
FWH-35B
FWH-40B
FWH-45B
FWH-50B
FWH-60B
FWH-70B
FWH-80B
FWH-90B
FWH-100B
FWH-125B
FWH-150B
FWH-175B
FWH-200B
FWH-225A
FWH-250A
FWH-275A
FWH-300A
FWH-325A
FWH-350A
FWH-400A
FWH-450A
84.0
108.0
120.0
129.0
145.0
180.0
210.0
230.0
FWH-500A
FWH-600A
FWH-700A
FWH-800A
FWH-1000A
FWH-1200A
FWH-1400A
FWH-1600A
† Watts loss at rated current.
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 720007, 360 (225-800 A), 5785304 (35-200 A,
1000-1600 A)
4-8
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
KAC — North American
600 Vac (UL), 1 to 1000 A
North American style bolted tags high speed fuses. These fuses
are supplied as replacements only. For new installations, Eaton
recommends the 700 V FWP. See page 4-11.
Ratings
•
Volts 600 Vac
•
Amps 1-1000 A
•
IR 200 kA RMS Sym.
Agency information
UL Recognized, JFHR2, E56413 (1-600 A only)
•
CE
Rated voltage
600 Vac (UL)
Rated current (amps) Catalog no.
1
KAC-1
2
KAC-2
3
KAC-3
4
KAC-4
5
KAC-5
6
KAC-6
7
KAC-7
8
KAC-8
9
KAC-9
10
KAC-10
12
KAC-12
15
KAC-15
17.5
KAC-17.5
20
KAC-20
25
KAC-25
30
KAC-30
35
KAC-35
40
KAC-40
45
KAC-45
50
KAC-50
60
KAC-60
70
KAC-70
80
KAC-80
90
KAC-90
100
KAC-100
110
KAC-110
125
KAC-125
150
KAC-150
175
KAC-175
200
KAC-200
225
KAC-225
250
KAC-250
300
KAC-300
350
KAC-350
400
KAC-400
450
KAC-450
500
KAC-500
600
KAC-600
700
KAC-700
800
KAC-800
1000
KAC-1000
Dimensions — in
High speed fuses
•
1-30 A and 450-1000 A
A
B2
B3
C
D
G
E
F
H
35-400 A
Amp
range
A
B1
B2
B3
C
D
1-30
2.88 2.50 —
— 1.88 0.41
35-60
4.38 — 3.75 3.50 2.75 0.63
70-100 5.00 — 4.06 3.66 2.75 0.75
110-200 5.14 — 4.39 3.77 2.91 1.00
225-400 6.18 — 4.82 4.57 3.00 1.63
450-800 6.25 4.75 —
3.06 2.00
1000
7.25 4.75 —
3.06 2.75
1” = 25.4mm
E
—
0.34
0.41
0.41
0.56
—
—
F
0.56
0.81
1.00
1.50
2.00
2.50
3.50
G
0.06
0.09
0.13
0.19
0.25
0.25
0.38
H
0.26
0.47
0.61
0.72
0.69
0.56
0.56
Data sheet no. 720009
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-9
4 — High speed fuses
KBC — North American
600 Vac (UL), 35 to 800 A
North American style bolted tags and flush-end high speed fuses.
These fuses are supplied as replacements only. For new installations,
Eaton recommends the 700 V FWP fuses. See page 4-11.
Ratings
•
Volts 600 Vac (UL)
•
Amps 35-800 A
•
IR 200 kA RMS Sym.
Agency information
•
UL Recognized, JFHR2, E56412 (35-600 A only)
•
CE
Rated voltage
600 Vac (UL)
Rated current (amps)
35
40
45
50
60
70
80
90
100
110
125
150
175
200
225
250
300
350
400
450
500
600
800
Catalog no.
KBC-35
KBC-40
KBC-45
KBC-50
KBC-60
KBC-70
KBC-80
KBC-90
KBC-100
KBC-110
KBC-125
KBC-150
KBC-175
KBC-200
KBC-225
KBC-250
KBC-300
KBC-350
KBC-400
KBC-450
KBC-500
KBC-600
KBC-800
Dimensions — in
A
B
C
D
H
F E
G
J
35-60 and 110-600 A
70-100 A
4
1/2-24 x 1/2”
3.75
0.75
2.5 2.859
0.75
800 A
Rated current
(amps)
35-60
A
B
C
D
E
F
H
J
70-100
Refer to drawing
110-200
4.41 3.72 3.59 2.91 0.31 0.88 1.22 0.19 0.38
225-400
5.13 4.19 3.56 2.91 0.41 1.00 1.50 0.25 0.72
450-600
5.13 4.39 3.69 2.88 0.41 1.50 2.00 0.25 0.76
800
Refer to drawing
1” = 25.4mm
Data sheet no. 720010
4-10
G
4.38 3.75 3.50 2.75 0.34 0.63 0.81 0.09 0.47
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
FWP — North American
700 Vac/dc (UL), 5 to 1200 A
North American style bolted tags high speed fuses for the protection
of DC common bus, DC drives, power converters/rectifiers, reduced
rated voltage starters.
Ratings
•
Volts 700 Vac/dc (UL)
•
Amps 5-1200 A
•
IR
•
200 kA RMS Sym.
•
50 kA at 700 Vdc (Type A)
•
50 kA at 500 Vdc (Type B)
Agency information
UL Recognized, JFHR2, E91958 FWP-_B (5-100 A, 700-1200 A),
JFHR2, E56412 FWP-_A (125-600 A)
•
CSA Class 1422-30, (53787) on 5-800 A
•
CE
High speed fuses
•
I²t (A²s)
Rated voltage
Rated current (amps)
5
10
15
20
25
30
35
40
50
60
70
80
90
100
125
150
175
200
225
250
300
350
400
450
500
600
700
800
900
1000
1200
700 Vac/dc (UL)
Pre-arcing
1.6
3.6
10.0
26.0
44.0
58.0
34.0
76.0
135.0
210.0
305.0
360.0
415.0
540.0
1800.0
2900.0
4200.0
5500.0
7700.0
10,500.0
17,600.0
23,700.0
31,000.0
36,400.0
45,200.0
66,700.0
54,000.0
78,000.0
91,500.0
120,000.0
195,000.0
Clearing at 700 Vac
11
22
70
180
320
450
160
320
600
950
2000
2400
2700
3500
7300
11,700
16,700
22,000
31,300
42,500
71,200
95,600
125,000
137,000
170,000
250,000
300,000
450,000
530,000
600,000
1,100,000
Watts loss (W)†
1.5
4.0
5.5
6.0
7.0
9.0
12.0
12.0
12.0
15.5
18.0
21.0
25.0
27.0
28.0
32.0
35.0
43.0
45.0
48.0
58.0
65.0
78.0
94.0
107.0
122.0
125.0
140.0
150.0
170.0
190.0
Catalog no.
FWP-5B
FWP-10B
FWP-15B
FWP-20B
FWP-25B
FWP-30B
FWP-35B
FWP-40B
FWP-50B
FWP-60B
FWP-70B
FWP-80B
FWP-90B
FWP-100B
FWP-125A
FWP-150A
FWP-175A
FWP-200A
FWP-225A
FWP-250A
FWP-300A
FWP-350A
FWP-400A
FWP-450A
FWP-500A
FWP-600A
FWP-700A
FWP-800A
FWP-900A
FWP-1000A
FWP-1200A
† Watts loss at rated current.
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 720012, 5785316 (5-30 A), 361 (125-600 A),
5785308 (35-100 A, 700-1200 A)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-11
4 — High speed fuses
FWP — North American
700 Vac/dc (UL), 5 to 1200 A
Dimensions — in
A
D
E
C
H
G F
B
J
5-800 A
Amp range
5-30
35-60
70-100
125-200
225-400
450-600
700-800
900-1000
1200
1” = 25.4mm
A
2.87
4.38
4.41
5.09
5.09
7.09
6.63
B
0.56
0.81
0.95
1.50
2.00
2.50
2.00
C
1.86
2.75
2.59
2.84
2.84
2.84
2.76
D
2.48
3.71
3.63
4.19
4.28
5.72
5.56
E
2.48
3.31
3.56
3.5
3.53
4.19
5.06
F
0.25
0.34
0.34
0.41
0.41
0.53
0.63
G
0.41
0.73
0.75
1.00
1.50
2.00
1.50
H
0.06
0.13
0.13
0.25
0.25
0.38
0.25
J
0.25
0.54
0.38
0.75
0.78
1.30
0.88
Refer to drawing
0.49
1.03
0.625
1.38
2.75
3.85
3.5
5.15
5.97
7.59
900-1000 A -mm
10.87
9.59
9.34
6.84
5.84
4.25 Ø
3.84
1.62 1.75 3.5
0.62
0.75
1200 A -mm
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 720012, 5785316 (5-30 A), 361 (125-600 A),
5785308 (35-100 A, 700-1200 A)
4-12
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
FWJ — North American
1000 Vac /800 Vdc (UL), 35 to 2000 A
North American style bolted tags high speed fuses for the protection
of DC common bus, DC drives power converters/rectifiers, reduced
rated voltage starters and high voltage traction inverters.
Ratings
Volts
•
•
1000 Vac
•
800 Vdc
•
Amps 35-2000 A
•
IR
•
25 kA RMS Sym. (35-200 A)
•
100 kA RMS Sym. (250-2000 A)
•
50 kA at 800 Vdc (35-200 A and 450-600 A)
•
UL Recognized, JFHR8, E91958 on 50-600 A only
•
CE
Rated
voltage
1000 Vac/
800 Vdc
(UL)
I²t (A²s)
Rated
current
(amps) Pre-arcing
35
210
40
300
50
470
60
670
70
1100
80
1550
90
1900
100
2800
125
4800
150
6300
175
7500
200
11,700
250
16,000
300
23,500
350
33,000
400
47,000
500
39,500
600
61,000
800
87,000
1000
190,000
1200
370,000
1400
470,000
1600
700,000
1800
925,000
2000
1,330,000
Clearing at
1000 Vac
2000
2500
3500
5000
6900
9700
12,000
17,500
35,000
45,000
65,000
80,000
112,000
164,000
231,000
330,000
329,000
520,000
500,000
1,100,000
2,100,000
2,700,000
4,000,000
5,300,000
7,600,000
Watts
loss
(W)†
7
8
10
11
12
13
14
15
16
25
30
32
50
56
62
67
95
105
182
206
240
248
267
239
244
High speed fuses
Agency information
Dimensions — in
Catalog no.
FWJ-35A
FWJ-40A
FWJ-50A
FWJ-60A
FWJ-70A
FWJ-80A
FWJ-90A
FWJ-100A
FWJ-125A
FWJ-150A
FWJ-175A
FWJ-200A
FWJ-250A
FWJ-300A
FWJ-350A
FWJ-400A
FWJ-500A
FWJ-600A
FWJ-800A
FWJ-1000A
FWJ-1200A
FWJ-1400A
FWJ-1600A
FWJ-1800A
FWJ-2000A
A
D
E
C
H
G F
B
J
Amp
range
A
B
C
D
E
F
G
H
J
35-60
5.00
0.94
3.11
4.24
4.18
0.35
0.75
0.13
0.38
70-100
4.93
1.13
3.09
4.27
4.16
0.35
1.00
0.19
0.41
125-200
5.69
1.53
3.26
4.80
4.06
0.45
1.00
0.25
0.82
250-400
5.77
2.00
3.50
4.81
4.15
0.43
1.50
0.25
0.76
500-600
7.20
2.50
3.47
5.98
4.71
0.56
2.00
0.38
1.20
800-2000
6.81
3.50
3.31
5.47
4.96
0.63
2.75
0.50
0.88
1” = 25.4mm
† Watts loss at rated current.
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 720027, 5785303 (35-600 A),
5785309 (800-2000 A),
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-13
4 — High speed fuses
North American Accessories
BH modular type
Modular fuse blocks
Bussmann series line of fuse blocks provides the user with design
and manufacturing flexibility. Two identical half blocks make up a
modular assembly that can be panel mounted any distance apart to
accommodate any length fuse.
C5268 stud type
BH modular blocks provide a wide range of mounting configurations
for Bussmann series high speed semiconductors fuses. BH fuse
blocks have a short-circuit current rating up to 200 kA RMS Sym.
The simpler design is the C5268 modular fuse block. With this
design, the fuse terminal and cable (with termination) are mounted
on the same stud, minimizing installation labor. The stud type block
is available in the configurations shown in the table below.
Catalog no.
C5268-1
Max fuse amp rating
200
Stud
5/16-18 x 1"
200
200
100
100
5/16-18 x 1-3/4"
5/16-18 x 3/4"
1/4-20 x 1"
1/4-20 x 1-3/4"
C5268-2
C5268-3
C5268-4
C5268-5
Catalog no.
BH-0
BH-1
BH-2
BH-3
Max rated voltage
700
2500
5000
1250
Max fuse amp rating
100
400
600
700
1BS10x connector type
Bussmann series 1BS10 blocks utilize a tin-plated connector for wire
termination and heat dissipation), and a plated-steel stud for fuse
mounting. The connector type block is available in the configurations
shown below. Consult your Bussmann series product representative
for additional product details.
Catalog no.
1BS101
1BS102
1BS103
1BS104
Max rated voltage
600
600
600
600
Max fuse amp rating
100
400
400
600
Data sheets: 1200 (BH-0), 1201 (BH-1), 1202 (BH-2), 1203 (BH-3), 1206 (1BS101), 1207 (1BS102), 1208 (1BS103), 1209 (1BS104)
4-14
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
LCT, LET BS88
240 Vac/150 Vdc (IEC), 250-280 Vac/150 Vdc (UL), 6 to 180 A
BS88 style bolted tag high speed fuses for the protection of DC
common bus, DC drives, power converters/rectifiers and reduced
rated voltage starters. Low watts loss in a compact size.
Ratings
Volts
•
LCT 240 Vac/150 Vdc (IEC), 250 Vac/150 Vdc (UL)
•
LET 280 Vac/150 Vdc (UL, 25-160 A), 250 Vac/150 Vdc (UL 180 A)
•
Amps 6-180 A
•
IR
•
200 kA RMS Sym.
•
50 kA DC at 125 Vdc
•
100 kA at 80 Vdc (70-1000 A)
Dimensions — mm
47
38
28
Operating class aR.
Agency information
•
Designed and tested to BS88 Part 4 and IEC 60269 Part 4
•
UL Recognized*
•
CCC (LCT only)
•
CE
8.7
6.4 4
5.5
LCT
* All fuses have been tested at 318 Vac. Consult Bussmann series product
representative for UL Recognized status.
55
41
26
19.1
12.7
6.95
17.7
9.7
2.34
Indicator (optional)
LET — indicator optional
I²t (A²s)
Fuse symbol
LCT
LET
Rated voltage
240 Vac/150 Vdc (IEC)
250 Vac/150 Vdc (UL)
280 Vac/150 Vdc (UL)
250 Vac/150 Vdc (UL)
Rated current(amps) Pre-arcing
6
2.0
10
3.8
12
7.0
16
20.0
20
25.0
25
32
35
50
63
80
100
125
160
180
Clearing at 240 Vac
9
22
32
100
160
18.0
32.0
50.0
100.0
180.0
300.0
600.0
600.0
1100.0
1600.0
250
450
600
1400
2200
3800
7500
7500
16,000
29,000
Watts loss (W)†
1.0
2.5
2.5
2.5
4.0
4.0
5.0
5.0
7.0
9.0
10.0
10.0
16.0
20.0
21.0
Catalog no.
6LCT
10LCT
12LCT
16LCT
20LCT
25LET
32LET
35LET
50LET
63LET
80LET
100LET
125LET
160LET
180LET
† Watts loss at rated current.
Note: 7LET, 10LET, 12LET and 16LET are available for replacement purposes on existing equipment.
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 720004, 5785296 (LCT), 5785293 (LET)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-15
High speed fuses
•
4 — High speed fuses
LMT, LMMT BS88
240 Vac/150 Vdc (IEC), 250 Vac/150 Vdc (UL), 160 to 900 A
BS88 style bolted tags high speed fuses for the protection of DC
common bus, DC drives, power converters/rectifiers and reduced
rated voltage starters. Low watts loss in a compact size.
Ratings
Volts
•
•
240 Vac/150 Vdc (IEC)
•
250 Vac/150 Vdc (UL)
•
Amps 160-900 A
•
IR
•
200 kA RMS Sym., 40 kA at 150 Vdc (IEC)
•
200 kA RMS Sym., 50 kA at 150 Vdc (UL)
Operating class aR
Agency information
•
Designed and tested to BS88 Part 4 and IEC 60269 Part 4
•
UL Recognized*
•
CCC
•
CE
* All fuses have been tested at 318 Vac. Consult Bussmann series product
representative for UL Recognized status.
I²t (A²s)
Fuse symbol
Rated current
(amps)
160
Rated voltage
240 Vac /150 Vdc (IEC)
LMT
250 Vac /150 Vdc (UL)
240 Vac /150 Vdc (IEC)
LMMT
250 Vac /150 Vdc (UL)
Clearing at
Pre-arcing
1100
120 Vac
240 Vac
7000
16,000
Watts loss
(W)†
17
Catalog no.
160LMT
200
250
315
355
1500
3200
6000
8000
10,000
20,000
35,000
50,000
20,000
40,000
75,000
100,000
28
28
35
35
200LMT
250LMT
315LMT
355LMT
400
450
400
500
630
710
800
14,000
18,000
6000
14,000
24,000
32,000
52,000
70,000
100,000
35,000
80,000
150,000
200,000
300,000
160,000
220,000
80,000
170,000
300,000
460,000
600,000
40
42
60
64
75
77
82
400LMT
450LMT
400LMMT
500LMMT
630LMMT
710LMMT
800LMMT
900
75,000
400,000
800,000
97
900LMMT
† Watts loss at rated current.
Dimensions — mm
41.3
83.5
58.0
30.5
83.5
58.0
30.5
3.15
83.5
25.4
38.1
6.5
25.4
13.5
LMT — indicator optional
82.5
10.3
38.1
13.5
LMMT — indicator optional
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 720004, 5785294 (LMT), 5785295 (LMMT)
4-16
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
CT, ET, FE, EET, FEE BS88
690 Vac/500 Vdc (IEC), 700 Vac/500 Vdc (UL), 6 to 200 A
BS88 style bolted tags high speed fuses for the protection of DC
common bus, DC drives, power converters /rectifiers and reduced
rated voltage starters.
Ratings
•
Volts
•
690 Vac/500 Vdc (IEC)
•
700 Vac/500 Vdc (UL)
•
Amps 6-200 A
•
IR
•
CT: IEC — 90 kA RMS Sym., 40 kA at 500 Vdc,
UL — 200 kA RMS Sym., 50 kA at 500 Vdc
•
ET, EET, FE and FEE: 200 kA RMS Sym.,50 kA at 500 Vdc
Operating class aR
•
Designed and tested to BS88 part 4 and IEC 60269 Part 4
•
UL Recognized*
•
CCC for ET, FE, EET, FEE
•
CE
High speed fuses
Agency information
* Consult your Bussmann series product representative for UL Recognized status.
Dimensions — mm
9.7
74.6
64.3
7.1
55
48.0
6.4 4
63.5
17.7
5.5
19.1
8.7
77.0
CT
2.34
12.7
ET, FE — indicator optional
94.0
71.0
46.0
19.5
8.7
31.8
36.0
11.9
1.6
EET, FEE — indicator optional
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 5785312 (CT, ET), 5785314 (FE),
5785313 (EET), 5785292 (FEE)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-17
4 — High speed fuses
CT, ET, FE, EET, FEE BS88
690 Vac/500 Vdc (IEC), 700 Vac/500 Vdc (UL), 6 to 200 A
Fuse symbol Rated voltage
CT
ET
FE
EET
FEE
690 Vac/500 Vdc (IEC)
700 Vac/500 Vdc (UL)
690 Vac/500 Vdc (IEC)
700 Vac/500 Vdc (UL)
690 Vac/500 Vdc (IEC)
700 Vac/500 Vdc (UL)
690 Vac/500 Vdc (IEC)
700 Vac/500 Vdc (UL)
690 Vac/500 Vdc (IEC)
700 Vac/500 Vdc (UL)
Rated current
(amps)
6
10
12
16
20
25
32
35
40
45
56
63
80
35
40
45
50
63
71
80
90
100
90
110
140
160
100
120
140
160
180
200
I²t (A²s)
Pre-arcing
1.8
7.0
10.0
16.0
32.0
25.0
32.0
52.0
103.0
103.0
135.0
171.0
360.0
33.0
52.0
76.0
103.0
135.0
210.0
250.0
360.0
470.0
490.0
600.0
1050.0
1500.0
400.0
540.0
850.0
1000.0
1400.0
1900.0
Clearing at 415 Vac
8.5
30.0
40.0
66.0
150.0
150.0
190.0
310.0
600.0
680.0
950.0
1200.0
2500.0
130.0
180.0
270.0
380.0
480.0
600.0
900.0
1300.0
1800.0
300.0
4000.0
7000.0
10,000.0
1600.0
1900.0
2500.0
3700.0
5300.0
7100.0
Clearing at 660 Vac
12
48
65
110
220
250
350
500
900
1100
1500
2000
4000
200
300
450
600
750
950
1500
2100
2800
4500
6500
12,000
17,000
2400
3100
3800
5700
8400
11,400
Watts
loss (W)†
2
3
3
7
7
7
11
11
9
11
14
16
18
9
9
11
11
12
17
20
20
23
19
27
35
39
24
32
36
46
46
52
Catalog no.
6CT
10CT
12CT
16CT
20CT
25ET
32ET
35ET
40ET
45ET
56ET
63ET
80ET
35FE
40FE
45FE
50FE
63FE
71FE
80FE
90FE
100FE
90EET
110EET
140EET
160EET
100FEE
120FEE
140FEE
160FEE
180FEE
200FEE
† Watts loss at rated current.
Note: FC, 8ET, 12ET, 15ET, 20ET, 65EET and 75EET are available for replacement purposes on existing equipment.
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 5785312 (CT, ET), 5785314 (FE),
5785313 (EET), 5785292 (FEE)
4-18
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
FM, FMM, MT, MMT BS88
690 Vac/350-450 Vdc (IEC),700 Vac/500 Vdc (UL), 160 to 710 A
BS88 style bolted tags high speed fuses for the protection of DC
common bus, DC drives, power converters /rectifiers and reduced
rated voltage starters.
Ratings
Volts
•
FM: 690 Vac/450 Vdc (IEC); 700 Vac/500 Vdc (UL)
•
FMM: 690 Vac/450 Vdc (IEC); 700 Vac (UL)
•
MT and MMT: 690 Vac/350 Vdc (IEC); 700 Vac (UL)
•
Amps 160-710 A
•
IR
•
FM: 200 kA RMS Sym. (IEC/UL), 40 kA at 450 Vdc (IEC), 50 kA
at 500 Vdc (UL)
•
FMM: 200 kA RMS Sym. (IEC/UL), 40 kA at 450 Vdc (IEC).
•
MT and MMT: 200 kA RMS Sym. (IEC/UL), 40 kA at 350 Vdc
(IEC).
High speed fuses
•
Operating class aR
Agency information
•
Designed and tested to BS88 Part 4 and IEC 60269 Part 4
•
UL Recognized MT and MMT 350 Vdc (IEC) rating*
•
CCC for FM and FMM
•
CE
Consult your Bussmann series product representative for UL Recognized status.
Dimensions — mm
112.0
41.3
84.0
49.5
3.15
38.1
10.3
25.4
13.5
FM, MT — indicator optional
112.0
82.5
6.5
84.0
49.5
10.3
25.4
38.1
13.5
FMM, MMT — indicator optional
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 5785314 (FM), 5785313 (MT),
5785292 (FMM), 5785311 (MMT)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-19
4 — High speed fuses
FM, FMM, MT, MMT BS88
690 Vac/350-450 Vdc (IEC), 700 Vac/500 Vdc (UL), 160 to 710 A
Fuse symbol
FM
FMM
MT
MMT
Rated voltage
690 Vac/450 Vdc (IEC)
700 Vac/500 Vdc (UL)
690 Vac/450 Vdc (IEC)
700 Vac (UL)
690 Vac/350 Vdc (IEC)
700 Vac (UL)
690 Vac/350 Vdc (IEC)
700 Vac (UL)
Rated
current
(amps)
180
200
225
250
280
315
350
400
450
500
550
630
700
160
180
200
250
280
315
355
180
200
225
280
315
355
400
450
500
560
630
710
I²t (A²s)
Pre-arcing
1400
2600
3700
5200
7000
10,000
15,000
10,000
15,000
20,000
30,000
45,000
60,000
2400
3800
6000
11,500
16,500
19,000
22,000
1650
2200
3700
6600
8600
13,500
21,000
30,000
42,000
60,000
68,500
78,000
Clearing at 415 Vac
7500
10,500
14,500
20,500
30,500
40,000
60,000
40,000
60,000
82,000
120,000
180,000
245,000
15,000
25,000
40,000
80,000
100,000
125,000
160,000
12,000
16,000
26,000
47,000
62,000
97,000
150,000
220,000
300,000
430,000
500,000
600,000
Clearing at 660 Vac
13,500
18,500
26,500
37,500
55,000
77,000
105,000
72,500
105,000
150,000
215,000
310,000
420,000
25,000
38,000
58,000
110,000
150,000
180,000
200,000
18,000
23,000
40,000
70,000
91,000
140,000
220,000
320,000
450,000
640,000
720,000
850,000
Watts loss
(W)†
40
40
44
48
48
55
55
85
90
100
100
100
120
26
26
27
32
35
42
51
42
42
42
47
51
54
60
57
64
64
86
105
Catalog no.
180FM
200FM
225FM
250FM
280FM
315FM
350FM
400FMM
450FMM
500FMM
550FMM
630FMM
700FMM
160MT
180MT
200MT
250MT
280MT
315MT
355MT
180MMT
200MMT
225MMT
280MMT
315MMT
355MMT
400MMT
450MMT
500MMT
560MMT
630MMT
710MMT
† Watts loss at rated current.
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 5785314 (FM), 5785313 (MT),
5785292 (FMM), 5785311 (MMT)
4-20
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
BS 88 Accessories
Trip indicator
Microswitches
Trip-indicator fuses are available for use in parallel with the main
BS88-4 fuses. They can either be attached to the associated fuse or
mounted separately in panel mounted fuse clips. Push-on adapters
with microswitch (catalog numbers MAI and MBI) are available for
use with the trip indicator to provide a means for remote indication.
Microswitch/adapter: MAI and MBI
Fuse ratings of 20 A and below cannot usually accommodate a trip
fuse in parallel.
When a trip-indicator is to be attached to the main fuse, an
accessory pack comprising a pair of mounting clips and an
appropriate trip indicator is required. The clips are snapped onto the
fuse and the indicator is pressed into clips as shown below.
Trip indicator kit catalog numbers (indicator + clips)
Catalog no.
EC-600
EC-600
EC-600
EC-600
EC-250
MC-600
MC-600
MC-250
MC-250
Rated current
250
500
600
700
1100
1500
2000
2500
Description
MAI
Trip indicator adapter and
microswitch
Terminal orientation
Back
MBI
Trip indicator adapter and
microswitch
Side
Microswitch ratings (MAI and MBI)
Terminals
Quick connect
Current rating
4 A @ 250 V RMS
AC 50/60 Hz resistive load
6 A @ 127 V RMS
0.7 A @ 110 Vdc
DC, resistive load
2 A @ 30 Vdc
Maximum working voltage
Indicator only
Catalog no.
TI250
TI500
TI600
TI700
TI1100
TI1500
TI2000
TI2500
Catalog no.
High speed fuses
For fuse symbol
ET
EET
FE
FEE
LET
FM
FMM
LMT
LMMT
To provide a means of remote indication with the trip indicators, we
offer two microswitch/adapters. The microswitches are provided with
double pole, single throw contacts, having both a normally open
(NO) and a normally closed (NC) position. A special material is used
in the construction of the adapter to provide reliable operation in the
temperatures ranges associated with standard operating conditions
and during fuse operation.
Dim. ‘A’ (mm)
37.6
47.5
55.7
61.8
98.4
120.8
147.5
198.3
1000 V
Contact-to-contact (RMS)
1500 V
Maximum DC volts
110 Vdc
Indicator dimensions — mm
6
21
6.35
0.8
Microswitch/adapter dimensions — mm
A
6.0
2.8
2.4
3.6
5.2
5.2
Indicator panel mount clips
CL1 panel mount fuse clips are available for mounting a trip-indicator
directly to a PCB or insulated panel, or when mounting directly on
the fuse is impractical. Order catalog number CL1.
CL1 dimensions — mm
44 36
3.6
44 36
6.0
14
8.7
9.5
NO
NC NC
21
NO
MAI
21
or
MBI
50.8
B
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-21
4 — High speed fuses
FWA Ferrule
150 Vac/dc (UL), 10x38mm and 21x51mm, 5 to 60 A
Ferrule style high speed fuses for the protection of DC common bus,
DC drives, power converters /rectifiers and reduced rated voltage
starters.
Ratings
•
Volts 150 Vac/dc (UL)
•
Amps 5-60 A
•
IR
•
200 kA RMS Sym.
•
50 kA DC at 150 Vdc
Operating class aR
Agency information
•
UL Recognized, JFHR2, E91958
•
CE
Fuse size
Rated voltage
10x38mm (13/32”x1-1/2”)
150 Vac/dc (UL)
21x51mm (13/16”x2”)
Rated current
(amps)
5
10
15
20
25
30
35
40
45
50
60
I²t (A²s)
Pre-arcing
1.6
3.6
14.0
33.0
58.0
100.0
75.0
100.0
130.0
170.0
250.0
Clearing at 150 Vac
8
16
50
130
220
400
800
1000
1300
1600
2400
Watts loss (W)†
2.0
2.7
3.3
3.8
4.9
4.9
4.5
5.1
6.0
7.3
8.0
Catalog no.
FWA-5A10F
FWA-10A10F
FWA-15A10F
FWA-20A10F
FWA-25A10F
FWA-30A10F
FWA-35A21F
FWA-40A21F
FWA-45A21F
FWA-50A21F
FWA-60A21F
† Watts loss at rated current.
Dimensions — in (mm)
C
A
B
Amp range
5-30
35-60
A
1.5 (38.1)
2.0 (50.8)
B
C
0.38 (9.5) 0.41 (10.3)
0.63 (15.9) 0.81 (20.6)
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 720003,5785317 (5-30 A), 5785305 (35-60 A)
4-22
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
FWX Ferrule
250 Vac/dc (UL), 14x51mm, 1 to 50 A
Ferrule style high speed fuses for the protection of DC common bus,
DC drives, power converters/rectifiers rated voltage starters.
Ratings
•
Volts
•
250 Vac (UL, all ratings)
•
250 Vdc (UL, 5-50 A only)
•
Amps 1-50 A
•
IR
•
200 kA RMS Sym. (UL, all ratings)
•
50 kA at 250 Vdc (UL, 5-50 A only)
Operating class aR
•
UL Recognized, JFHR2, E91958 1-50 A
•
CSA Class 1422-30, 1422-90 (53787) 5-30 A
•
CE
High speed fuses
Agency information
I²t (A²s)
Fuse size
Rated voltage
250 Vac (UL)
14x51mm (9/16”x2”)
250 Vac/dc (UL)
Rated current(amps)
1
2
3
4
5
10
15
20
25
30
50
Pre-arcing Clearing at 250 Vac
0.03
0.40
0.08
0.10
0.11
0.26
0.1
0.23
1.6
13.00
3.6
24.00
14.0
83.00
33.0
200.00
58.0
300.00
100.0
500.00
200.0
1800.00
Watts loss
(W)†
5.7
8.6
2.8
3.0
1.3
3.4
3.8
4.6
5.3
5.9
5.7
Catalog no.
FWX-1A14F
FWX-2A14F
FWX-3A14F
FWX-4A14F
FWX-5A14F
FWX-10A14F
FWX-15A14F
FWX-20A14F
FWX-25A14F
FWX-30A14F
FWX-50A14F
† Watts loss at rated current.
Dimensions — mm (in)
50.8
(2.0)
14.3
(0.56)
15.5
(0.61)
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 720006, 5785302
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-23
4 — High speed fuses
FWH Ferrule
2011/65/EU
500 Vac (UL), 6x32mm, 0.25 to 30 A
Ferrule style high speed fuses for the protection of DC common bus,
DC drives, power converters/rectifiers and reduced rated voltage
starters.
Ratings
Volts
•
•
500 Vac (UL — 0.25-1 A and 3.15-30 A)
•
1000 Vac (UL — 2 A)
•
600 Vdc (UL — 1-5 A)
•
Amps 0.25-30 A
•
IR
Dimensions — mm (in)
•
50 kA AC (0.25-1 A and 3.15-20 A)
•
30 kA AC (2 A)
•
20 kA AC (25-30 A)1
•
50 kA DC (1-5 A))
31.8
(1.25)
3.2
(0.125)
Tested at PF = 76%.
1
6.4
(0.25)
Operating class aR
Agency information
Opening times
•
UL Recognized, JFHR2, E91958 (0.25-7 A) and JDYX2, E19180
(10-30 A)
Amp range
•
CSA Component Acceptance Class 1422-30, 1422-90 (53787)
0.25-7 A
10-30
•
RoHS compliant
•
CE
Amps
0.25
0.5
1
2
3.15
4
5
6.3
7
10
12.5
15
16
20
25
30
Rated voltage
Vac
Vdc
—
500
1000
600
500
—
0.25-7
150%
200%
300%
>30 min
>30 min
≤ 10 sec
300 %
200 %
I2t (A2s)
Catalog no.
Pre-arcing
Clearing @ 500Vac Watts loss (W)† Standard
RoHS compliant
0.01
0.05
2.7
FWH-.250A6F
0.05
0.25
1.2
FWH-.500A6F
0.4
2
1.7
FWH-001A6F
1.3
3.5
3.2
FWH-002A6F
3.1
7.7
2.9
—
FWH-3.15A6F
—
—
—
FWH-004A6F
15
40
2.1
FWH-005A6F
36
90
2.3
FWH-6.30A6F
50
125
2.5
FWH-007A6F
9.9
139
2.86
FWH5-010A6F
FWH5-010A6FR
20
60
3.53
FWH5-12-5A6F
FWH5-12-5A6FR
44
146
3.08
FWH5-015A6F
FWH5-015A6FR
48
177
4.48
FWH5-016A6F
FWH5-016A6FR
75
259
4.26
FWH5-020A6F
FWH5-020A6FR
126
345
—
FWH-025A6F
FWH-025A6FR
145
430
—
FWH-030A6F
FWH-030A6FR
† Watts loss at rated current.
Data sheet no.720038
4-24
Min IR
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
FWH Ferrule
500 Vac/ Vdc (UL), 14x51mm, 1 to 30 A
Ferrule style high speed fuses for the protection of DC common
bus, DC drives, power converters/rectifiers and reduced rated
voltage starters.
Ratings
Volts
•
•
500 Vac (UL, all ratings)
•
500 Vdc (UL, 5-30 A only)
•
Amps 1-30 A
•
IR
•
200 kA RMS Sym. all ratings
•
50 kA at 500 Vdc 5-30 A only
Operating class aR
•
UL Recognized 1-30 A
•
CSA Class 1422-30, (53787) 5-30 A
•
CE
High speed fuses
Agency information
I²t (A²s)
Fuse size
Rated voltage
500 Vac (UL)
14x51mm (9/16"x2")
500 Vac/dc (UL)
Rated current (amps)
1
2
3
4
5
6
10
12
15
20
25
30
Pre-arcing
0.04
0.08
0.11
0.10
2.00
2.00
4.00
7.00
10.00
26.00
49.00
58.00
Clearing at 500 Vac
0.2
0.1
0.2
0.2
7.0
7.0
15.0
25.0
40.0
100.0
200.0
240.0
Watts loss (W)†
5.7
8.7
2.8
3.0
1.5
1.5
4.0
4.3
5.5
6.5
7.0
9.0
Catalog no.
FWH-1A14F
FWH-2A14F
FWH-3A14F
FWH-4A14F
FWH-5A14F
FWH-6A14F
FWH-10A14F
FWH-12A14F
FWH-15A14F
FWH-20A14F
FWH-25A14F
FWH-30A14F
† Watts loss at rated current.
Dimensions — mm (in)
50.8
(2.0)
14.3
(0.56)
15.5
(0.61)
For details on electrical characteristics, contact Application Engineering and ask for data sheets:720008, 5785298
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-25
4 — High speed fuses
FWC Ferrule
600-700 Vac/700 Vdc (UL), 10x38mm, 1 to 32 A
Ferrule style high speed fuses for the protection of DC common bus,
DC drives, power converters/rectifiers and reduced rated voltage
starters.
Ratings
Volts
•
•
700 Vac/dc (UL, 1-4 A)
•
600 Vac (UL, 6-32 A), 700 Vdc (UL, 6-25 A)
•
Amps 1-32 A
•
IR
•
200 kA RMS Sym. at 600 Vac (6-32 A)
•
200 kA RMS Sym. at 700 Vac (1-4 A)
•
10 kA DC at 700 Vdc (1-25 A)
Operating class aR
Agency information
•
UL Recognized, JFHR8, E91958 6-32 A
•
CSA Class 1422-30, (53787) 6-32 A
•
CE
Fuse size
Rated voltage
700 Vac/dc (UL)
10x38mm (13/32"x1-1/2")
600 Vac/700 Vdc (UL)
600 Vac (UL)
Rated current
(amps)
1
2
3
4
6
8
10
12
16
20
25
32
I²t (A²s)
Pre-arcing Clearing at 600 Vac
0.2
1.2
0.5
3.0
1.6
11.0
5.2
32.0
4.0
30.0
6.0
9.0
15.0
25.0
34.0
60.0
95.0
50.0
70.0
120.0
150.0
260.0
390.0
600.0
Watts loss (W)†
0.5
1.2
1.5
1.5
1.5
Catalog no.
FWC-1A10F
FWC-2A10F
FWC-3A10F
FWC-4A10F
FWC-6A10F
2.0
2.5
3.0
3.5
4.8
6.0
7.5
FWC-8A10F
FWC-10A10F
FWC-12A10F
FWC-16A10F
FWC-20A10F
FWC-25A10F
FWC-32A10F
† Watts loss at rated current.
Dimensions — mm
38
10
9.5
For details on electrical characteristics, contact Application Engineering and ask for data sheets:720011, 5785306
4-26
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
FWP Ferrule
690 Vac (IEC) 10x38mm, 4 to 32 A
Ferrule style Class gR high speed fuses for the protection of AC/DC
drives and semiconductors.
Ratings
•
Volts 690 Vac
•
Amps 4-32 A
•
IR
•
200 kA RMS Sym.
Operating class gR
Agency information
UL 248-13
•
Designed and tested to IEC 60269, Part 4
•
CE
High speed fuses
•
I²t (A²s)
Fuse type
Without striker
Fuse size
10x38 mm
Rated voltage
690 Vac (IEC)
Rated current
(amps)
Pre-arcing
4
5.6
Watts loss (W)†
Clearing at 690 Vac
17
0.8In
1.13
In
2.05
Catalog no.
FWP-4G10F
6
16.0
48
1.56
3.0
FWP-6G10F
8
4.3
38
0.97
1.68
FWP-8G10F
10
6.6
59
1.20
2.09
FWP-10G10F
12
9.6
84
1.69
2.99
FWP-12G10F
16
17.0
150
2.31
4.27
FWP-16G10F
20
23.5
200
2.86
5.35
FWP-20G10F
25
60.2
512
2.94
5.52
FWP-25G10F
32**
94.0
800
3.82
7.43
FWP-32G10F
† Watts loss at rated current.
** 32 A rated current with 25mm2 conductors, derate to 27 A with 6mm2 conductors.
Data sheet no. 10467
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-27
4 — High speed fuses
FWP Ferrule
690 Vac (IEC), 700 Vac (UL), 600 - 700 Vdc (UL), 14x51mm,
1 to 50 A
Ferrule style Class aR high speed fuses for the protection of DC
common bus, DC drives, power converters/rectifiers and reduced
rated voltage starters. Available with or without striker.
Ratings
•
Volts 690 Vac (IEC), 700 Vac/600 Vdc (UL) with striker (see table for
striker version)
•
Amps 1-50 A
•
IR
•
200 kA RMS Sym.
•
50 kA at 800 Vdc (5-50 A non striker version)
•
600 Vdc for striker version
Operating class aR
Agency information
•
UL Recognized, (without striker only) JFHR2, E91958
•
CSA (without striker only) Class 1422-30, 1422-90 (53787)
•
Designed and tested to IEC 60269, Part 4
•
CE
Fuse type
Fuse size
Rated voltage
700 Vac (UL)
Without striker
690 Vac (IEC)
700 Vac/dc (UL)
14x51mm (9/16”x2”)
With striker
700 Vac/600 Vdc (UL)
Rated
current
(amps)
1
I²t (A²s)
Pre-arcing
0.04
Clearing at 700 Vac
0.41
Watts loss (W)†
5.7
Catalog no.
FWP-1A14F
2
0.08
0.11
8.7
FWP-2A14F
3
0.11
0.26
2.8
FWP-3A14F
4
0.10
0.23
3.0
FWP-4A14F
5
2.00
11.00
1.5
FWP-5A14F
10
4.00
22.00
4.0
FWP-10A14F
15
10.00
70.00
5.5
FWP-15A14F
20
26.00
180.00
6.5
FWP-20A14F
25
49.00
320.00
7.0
FWP-25A14F
30
58.00
400.00
9.0
FWP-30A14F
32
68.00
600.00
8.0
FWP-32A14F
40
84.00
750.00
8.0
FWP-40A14F
50
200.00
1800.00
9.0
FWP-50A14F
10
4.00
32.00
2.0
FWP-10A14FI
15
7.00
63.00
4.0
FWP-15A14FI
20
26.00
234.00
4.0
FWP-20A14FI
25
42.00
378.00
4.0
FWP-25A14FI
30
52.00
468.00
6.0
FWP-30A14FI
32
68.00
600.00
8.0
FWP-32A14FI
40
84.00
750.00
8.0
FWP-40A14FI
50
200.00
1800.00
9.0
FWP-50A14FI
† Watts loss at rated current.
Dimensions — mm (in)
50.8
(2.0)
59 (2.32)
14.3
(0.56)
51 (2.0)
14.3
(0.56)
Without striker
15.5
(0.61)
With striker
13.0 (0.5)
5.0
(0.2)
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 720025, 5781724 fuses without striker;
5785566 fuses with striker
4-28
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
FWP Ferrule
690 Vac 14x51mm, 1 to 50 A
Ferrule style Class gR high speed fuses for the protection of AC/DC
drives, semiconductors and high voltage auxiliary circuits in electric
vehicles. Available with or without striker.
Ratings
•
Volts 690 Vac
•
Amps 4-50 A
•
IR 200 kA RMS Sym.
Operating class gR
Agency information
UL 248-13
•
Designed and tested to IEC 60269, Part 4
•
CE
High speed fuses
•
Fuse type
Fuse size
Rated voltage
Without striker
14x51mm (9/16”x2”)
With striker
690 Vac (UL/IEC)
Rated
current
(amps)
4
I²t (A²s)
Watts loss (W)†
Pre-arcing Clearing at 690 Vac
5.6
17
0.8In
1.56
In
2.94
Catalog no.
FWP-4G14F
6
16
48
2.25
4.2
FWP-6G14F
8
3.8
30
1.18
2.0
FWP-8G14F
10
5.9
47
1.41
2.52
FWP-10G14F
12
8.4
68
1.95
3.54
FWP-12G14F
16
15
120
5.67
4.83
FWP-16G14F
20
27
170
2.91
5.4
FWP-20G14F
25
53
333
3.38
6.0
FWP-25G14F
32
108
679
3.72
6.93
FWP-32G14F
40
211
1331
4.13
7.52
FWP-40G14F
50
350
2200
5.36
9.8
FWP-50G14F
8
3.8
30
1.18
2.0
FWP-8G14FI
10
5.9
47
1.41
2.52
FWP-10G14FI
12
8.4
68
1.95
3.54
FWP-12G14FI
16
15
120
5.67
4.83
FWP-16G14FI
20
27
170
2.91
5.4
FWP-20G14FI
25
53
333
3.38
6.0
FWP-25G14FI
32
108
679
3.72
6.93
FWP-32G14FI
40
211
1331
4.13
7.52
FWP-40G14FI
50
350
2200
5.36
9.8
FWP-50G14FI
† Watts loss at rated current.
Dimensions — mm (in)
50.8
(2.0)
59 (2.32)
14.3
(0.56)
51 (2.0)
14.3
(0.56)
Without striker
15.5
(0.61)
With striker
13.0 (0.5)
5.0
(0.2)
Data sheet no. 10468
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-29
4 — High speed fuses
FWP Ferrule
700 Vac/dc (UL), 22x58mm, 20 to 100 A
Ferrule style high speed fuses for the protection of DC common bus,
DC drives, power converters/rectifiers and reduced rated voltage
starters. Available with or without striker.
Ratings
•
Volts 700 Vac/dc (UL)
•
Amps 20-100 A
•
IR
•
200 kA RMS Sym.
•
50 kA at 700 Vdc, L/R 5 ms
Operating class aR
Agency information
•
UL Recognized, (without striker only) JFHR2, E91958
•
CSA (without striker only) Class 1422-30, 1422-90 (53787)
•
CE
Fuse type
Fuse size
Rated voltage
Without striker
22x58mm (7/8"x2-9/32")
700 Vac/dc (UL
With striker
Rated current
(amps)
20
Pre-arcing
23.0
I²t (A²s)
Clearing at 700 Vac Watts loss (W)†
330
5.0
25
37.0
530
6.0
FWP-25A22F
32
55.0
780
8.0
FWP-32A22F
40
68.0
960
12.0
FWP-40A22F
50
155.0
2200
12.5
FWP-50A22F
63
280.0
4000
15.0
FWP-63A22F
80
550.0
7800
15.0
FWP-80A22F
100
1100.0
15,600
16.5
FWP-100A22F
20
19.0
260
5.0
FWP-20A22FI
25
34.0
410
6.0
FWP-25A22FI
32
53.5
605
8.0
FWP-32A22FI
40
68.0
750
9.0
FWP-40A22FI
50
135.0
1600
9.5
FWP-50A22FI
63
280.0
3080
11.0
FWP-63A22FI
80
600.0
6600
13.5
FWP-80A22FI
100
1100.0
12,500
16.0
FWP-100A22FI
† Watts loss at rated current.
Dimensions — mm (in)
58.0
(2.28)
Without striker
22.2
(0.87)
15.0
(0.6)
For details on electrical characteristics, contact Application Engineering and ask for data sheets:720026, 5781723
4-30
Catalog no.
FWP-20A22F
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
FWP Ferrule
690 Vac, 500 Vdc 22x58mm, 20 to 100 A
Ferrule style Class gR high speed fuses for the protection of AC/DC
drives, semiconductors and high voltage auxiliary circuits in electric
vehicles. Available with or without striker.
Ratings
•
Volts
•
690 Vac
•
500 Vdc
•
Amps 20-100 A
•
IR
•
200 kA RMS Sym.
•
50 kA DC
Operating class gR
•
UL 248-13
•
Designed and tested to IEC 60269, Part 4
•
CE
Fuse type
Fuse size
Rated voltage
Without striker
22x58 mm
690 Vac, 500Vdc
(7/8"x2-9/32")
With striker
Rated current
(amps)
20
Pre-arcing
24
I²t (A²s)
Clearing at 690 Vac
154
Watts loss (W)†
0.8In
In
3.23
6.00
High speed fuses
Agency information
Catalog no.
FWP-20G22F
25
43
274
3.66
6.65
FWP-25G22F
32
97
616
4.86
9.21
FWP-32G22F
40
180
899
4.50
8.24
FWP-40G22F
50
273
1362
6.26
11.85
FWP-50G22F
63
516
2575
7.35
13.80
FWP-63G22F
80
1092
5448
8.40
14.00
FWP-80G22F
100
2065
10,300
9.40
17.70
FWP-100G22F
20
24
154
3.23
6.00
FWP-20G22FI
25
43
274
3.66
6.65
FWP-25G22FI
32
97
616
4.86
9.21
FWP-32G22FI
40
180
899
4.50
8.24
FWP-40G22FI
50
273
1362
6.26
11.85
FWP-50G22FI
63
516
2575
7.35
13.80
FWP-63G22FI
80
1092
5448
8.40
14.00
FWP-80G22FI
100
2065
10,300
9.40
17.70
FWP-100G22FI
† Watts loss at rated current.
Dimensions — mm (in)
58.0
(2.28)
Without striker
22.2
(0.87)
15.0
(0.6)
Data sheet no. 10469
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-31
4 — High speed fuses
FWK Ferrule
750 Vdc (IEC), 20x127mm and 25x146mm, 5 to 60 A
Ferrule style high speed fuses for the protection of DC common bus,
DC drives, power converters/rectifiers and reduced rated voltage
starters.
Ratings
•
Volts 750 Vdc (IEC)
•
Amps
•
5-30 A (20x127mm)
•
35-60 A (25x146mm)
IR 50 kA at 750 Vdc, L/R 10-15 ms
•
Operating class gG
Agency information
CE
•
Fuse size
Rated voltage
20x127mm (13/32"x5")
750 Vdc (IEC)
25x146mm (1”x5-3/4")
Rated current
(amps)
5
8
10
15
20
25
30
35
40
50
60
I²t (A²s)
Pre-arcing
8.5
50
95
100
125
400
800
1300
1600
3100
5900
Clearing at 750 Vac
16
100
200
240
315
1100
2600
4600
5300
12,000
24,000
Watts loss (W)†
6.7
8.8
8.5
5.0
7.8
6.5
6.5
6.0
6.8
7.3
7.7
Catalog no.
FWK-5A20F
FWK-8A20F
FWK-10A20F
FWK-15A20F
FWK-20A20F
FWK-25A20F
FWK-30A20F
FWK-35A25F
FWK-40A25F
FWK-50A25F
FWK-60A25F
† Watts loss at rated current.
Dimensions — mm (in)
127.0
(5.0)
5-30 A — 20x127mm
20.5
(0.81)
16.0
(0.63)
146.0
(5.75)
24.5
(1.0)
20.64
(0.8)
35-60 A — 25x146mm
For details on electrical characteristics, contact Application Engineering and ask for data sheets:720039, 5785031
4-32
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
FWJ Ferrule
1000 Vac/800 Vdc (UL), 14x67mm, 20 to 30 A
Ferrule style high speed fuses for the protection of DC common
bus, DC drives, power converters/rectifiers, reduced rated voltage
starters and high voltage auxiliary circuits in electric vehicles..
Available with or without striker for remote indication.
Ratings
•
Volts 1000 Vac/800 Vdc
•
Amps 20-30 A
•
IR
•
25 kA RMS Sym.
•
50 kA at 800 Vdc
Operating class aR
Agency information
UL Recognized, JFHR2, E91958
•
CE
High speed fuses
•
Fuse size
Rated voltage
14x67mm (9/16"x2-5/8")
1000 Vac/ 800 Vdc (UL)
I²t (A²s)
Rated current
(amps)
20
25
Pre-arcing
25
33
Clearing at 1000 Vac
220
350
Watts loss (W)†
9
11
30
52
450
14
Catalog no.
FWJ-20A14F
FWJ-25A14F
FWJ-30A14F
† Watts loss at rated current.
Dimensions — mm
67
14
10
For details on electrical characteristics, contact Application Engineering and ask for data sheets:720028, 5785315
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-33
4 — High speed fuses
FWL Ferrule
1200 Vac/1000 Vdc (IEC), 20x127mm, 20 to 30 A
Ferrule style high speed fuses for the protection of DC common
bus, DC drives, power converters/rectifiers and reduced rated
voltage starters. Available with indicator.
Ratings
•
Volts
•
1200 Vac (IEC)
•
1000 Vdc (IEC)
•
Amps 20-30 A
•
IR
•
50 kA RMS Sym.
•
50 kA at 1000 Vdc
Operating class gR
Agency information
•
IEC 60077
•
CE
Fuse type
Fuse size
Rated voltage
Without indicator
20x127mm (13/16"x5")
With indicator
1200 Vac/1000 Vdc (IEC)
Rated current
(amps)
Pre-arcing
20
675
I²t (A²s)
Clearing at 1000 Vac
1550
Watts
loss
(W)†
5.9
Catalog no.
FWL-20A20F
FWL-25A20F
25
1200
2760
6.5
30
1850
4300
7.5
FWL-30A20F
20
675
1550
5.9
FWL-20A20FI
25
1200
2760
6.5
FWL-25A20FI
30
1850
4300
7.5
FWL-30A20FI
† Watts loss at rated current.
Dimensions — mm
For details on electrical characteristics, contact Application Engineering and ask for data sheets:720040, 5785455
4-34
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
FWS Ferrule
1400 - 2000 Vac/1000 Vdc (IEC), 20x127mm, 2 to 15 A
Ferrule style high speed fuses for the protection of DC common
bus, DC drives, power converters/rectifiers and reduced rated
voltage starters. Available with indicator.
Ratings
•
Volts
•
2000 Vac/1000 Vdc (IEC, 2-8 A)
•
1400 Vac/1000 Vdc (IEC, 10-15 A)
•
Amps 2-15 A
•
IR
•
50 kA RMS Sym.
•
50 kA at 1000 Vdc (2-10 A only)
Operating class gG
•
IEC 60077
•
CE
Fuse type
High speed fuses
Agency information
Fuse size
Rated voltage
2000 Vac/1000 Vdc (IEC)
Without indicator
1400 Vac/1000 Vdc (IEC)
20x127mm
(13/16"x5")
2000 Vac/1000 Vdc (IEC)
With indicator
1400 Vac/1000 Vdc (IEC)
Rated current
(amps)
2
I²t (A²s)
Pre-arcing
0.8
Clearing at 1000 Vac
2.4
Watts loss (W)†
4.4
Catalog no.
FWS-2A20F
6
27.0
81.0
6.7
FWS-6A20F
8
64.0
192.0
7.6
FWS-8A20F
10
118.0
277.0
3.0
FWS-10A20F
12
170.0
380.0
3.4
FWS-12A20F
15
209.0
500.0
5.0
FWS-15A20F
2
0.8
2.4
4.4
FWS-2A20FI
6
27.0
81.0
6.7
FWS-6A20FI
8
64.0
192.0
7.6
FWS-8A20FI
10
118.0
277.0
3.0
FWS-10A20FI
12
170.0
380.0
3.4
FWS-12A20FI
15
209.0
500.0
5.0
FWS-15A20FI
† Watts loss at rated current.
Dimensions — mm
For details on electrical characteristics, contact Application Engineering and ask for data sheets:720040, 5785109
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-35
4 — High speed fuses
Ferrule fuse accessories
JM70100 DIN-Rail/panel mount block for 22x58mm fuses
Modular, open-style fuse blocks
for 22x58mm cylindrical fuses
feature versatile 35mm DIN-Rail or
screw-to-panel mounting. Available
optional IP20 finger-safe covers
with lockout/tagout capability come
in indicating and non-indicating
versions. For use with FWP fuses.
Ratings
•
Volts 700 Vac
•
Amps 100 A
•
Withstand rating 200 kA
Agency information
•
UL Recognized, Guide IZTL2, File 14853
Catalog no.
JM70100-1CR
JM70100-2CR
JM70100-3CR
Poles
1
2
3
Terminal
type
Box lug
Optional IP20 cover catalog no.*
Indicating**
Non-indicating
CVRI-J-60060
CVR-J-60060
* Order separately, one cover per pole.
** Indication requires 90 V minimum and energized, closed circuit.
Data sheet no. 10496
CHM modular DIN-Rail mount holders for 10x38mm fuses
Bussmann series compact IP20 finger-safe modular DIN-Rail mount
fuse holders for 10x38mm cylindrical fuses.
Catalog no.
With
indicator
Without
indicator
Rated voltage
and current
CHM1DIU
CHM1DU
CHM2DIU
CHM2DU
CHM3DIU
CHM3DU
IEC 690 Vac/32 A
CHM4DIU
CHM4DU
UL 600 Vac/30 A
CHM1DNIU
CHM1DNU
CHM3DNIU
CHM3DNU
—
CHM1DNXU
Agency
information
Number of poles
Rated withstand
capacity
Terminal rating
1
IEC 60269-2
UR; CSA; CCC
3
4
IEC 60269-2
IEC 690 Vac/32 A
2
IEC 60269-2
1-pole + 1 neutral
3-pole + 1 neutral
1 neutral
IEC: 1 to 25mm² 70°C
PVC/copper cable, solid,
stranded, fine stranded,
fork lug, comb busbar;
single and dual
IEC 120 kA RMS Sym.
UL 200 kA RMS Sym.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
FWA, FWC.
CCC 100 kA RMS Sym.
N/A
Data sheet no. 10430
4-36
Compatible
Bussmann
series fuses
Eaton.com/bussmannseries
N/A
High speed fuses — 4
Ferrule fuse accessories
CH14 and CH22 modular DIN-Rail holders
Bussmann series compact DIN-Rail mount fuse holders for
14x51mm and 22x58mm cylindrical fuses. Available in different
versions with neutral and microswitch.
Mounting
•
35mm DIN-Rail
•
Panel mount (2xM4 screws)
CH14
CH22
Catalog no.
Without
indicator
With indicator
Description
—
Neutral only
Rated
withstand
capacity
Rated voltage
and current
Agency
markings
Terminal rating
690 Vac/50 A
IEC 60269-1
Size: 2.5-50mm2
750 Vdc/50 A
IEC 60269-2
Torque: 3 N•m max
690 Vac/125 A
IEC 60269-1
Size: 4 - 50 mm2
120 kA AC
1000 Vdc/125 A
IEC 60269-2
Torque: 4 N•m max
50 kA DC
Compatible
Bussmann
series fuses
CH141DNXU
CH141DU
CH141DIU
1 pole
CH142DU
CH142DIU
2 pole
CH143DU
CH143DIU
3 pole
CH144DU
CH144DIU
4 pole
CH141DNU
CH141DNIU
1 pole + neutral
CH143DNU
CH143DNIU
3 pole + neutral
CH141DMSU-F
—
CH143DMSU-F
—
3 pole with microswitch
—
3 pole +neutral with
microswitch
—
Neutral holder
CH143DNMSU-F
FWX-A14F1,
120 kA AC
FWH-A14F1,
FWP-A14F1, 2
1 pole with microswitch
22x58mm
CH221DNXU
1
2
CH221DU
CH221DIU
1 pole fuse holder
CH222DU
CH222DIU
2 pole fuse holder
CH223DU
CH223DIU
3 pole fuse holder
CH224DU
CH224DIU
4 pole fuse holder
CH221DNU
CH221DNIU
1 pole + neutral
CH223DNU
CH223DNIU
3 pole + neutral
—
CH221DMSU-F
1 pole with microswitch
—
CH223DMSU-F
3 pole with microswitch
—
CH223DNMSU-F
3 pole with microswitch
+ neutral
FWP ferrule1, 2
Maximum allowed continuous current applies. Please refer to data sheet for details.
Please consult our application engineers if you wish to use a FWP fuse with a striker option.
CH14 and CH22 accessories
Catalog no.
AL-D
CH14-P
CH14-L
CH22-L
CH14-IP20
CH22-IP20
CH14-MS1
CH22-MS1
CH14-MS3
CH22-MS3
Description
Multi-pole ganging clips, one kit will gang up to 4-poles together
Multi-pole handle pins, one kit will gang up to 12 handles together
Lockout padlock support, it will accept up to 5mm diameter padlock shank
Lockout padlock support, it will accept up to 5mm diameter padlock shank
For holder
CH14 and CH22
CH14 and CH22
CH14
CH22
IP20 protection accessory, provides IP20 protection to terminals with 10mm2 or less cable
CH14
CH22
CH14
1-pole microswitch for blown fuse monitoring
CH22
CH14
CH22
3-pole microswitch for blown fuse monitoring
Data sheet no. 10080 (CH14), 10115 (CH22)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-37
High speed fuses
14x51mm
4 — High speed fuses
170M — Square Body size 000 and 00, DIN 43653
690 Vac (IEC), 700 Vac/dc (UL), 10 to 400 A
Square body DIN 43653 bolted tags high speed fuses, for the
protection of DC common bus, DC drives, power converters/
rectifiers and reduced rated voltage starters. Available with and
without visual indicator, and Type T indicator for a microswitch.
Ratings
•
Volts
•
690 Vac (IEC, size 000 and 00)
•
700 Vac (UL, size 000; size 00 100-400 A only)
•
700 Vdc (UL, size 000)
•
Amps 10-400 A
•
IR
•
200 kA RMS Sym.
•
50 kA at 700 Vdc (size 000 only)
Operating class
•
gR - size 000 (10-63 A), size 00 (25-80 A)
•
aR - size 000 (>63 A), size 00 (>80 A)
Agency Information
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085
•
CSA Class 53787, File 1422-30 on size 000
•
CCC
•
CE
Dimensions — mm
The dotted line represents the Type T indicator fuse.
54
Indicator*
G
D
K
E
100
78
H
F
Type -U/80, -/80, -TN/80
Size
D
E
F
G
H
K
000
40
21
20
51
8
2
00
51
30
28
67
10
2
* Indicatior for size 00 fuses is a red pin.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6310 (Size 000), 170K6312 (Size 00)
4-38
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 000 and 00, DIN 43653
690 Vac (IEC), 700 Vac/dc (UL), 10 to 400 A
Fuse size Rated voltage
000
00
00
690 Vac (IEC)
700 Vac/dc (UL)
690 Vac (IEC)
690 Vac (IEC)
700 Vac (UL)
100
125
160
200
250
315
25
32
40
50
63
80
100
125
160
200
250
315
350
400
Catalog no.
Pre-Arcing
3.8
7.2
11.5
19.0
40.0
69.0
115.0
215.0
380.0
Clearing
at 660
Vac
25.5
48.0
78.0
130.0
270.0
460.0
770.0
1450.0
2550.0
Watts
loss
(W)†
3.0
5.5
7.0
9.0
10.0
12.0
15.0
16.0
19.0
695.0
1250.0
2350.0
4200.0
7750.0
12,000.0
19.0
28.5
50.0
95.0
170.0
310.0
620.0
1000.0
1900.0
3400.0
6250.0
10,000.0
13,500.0
18,000.0
4650.0
8500.0
16,000.0
28,000.0
51,500.0
80,500.0
130.0
195.0
360.0
640.0
1200.0
2100.0
4150.0
6950.0
13,000.0
23,000.0
42,000.0
68,500.0
91,500.0
125,000.0
24.0
28.0
32.0
37.0
42.0
53.0
6.0
7.0
9.0
10.0
12.0
15.0
20.0
25.0
30.0
35.0
45.0
55.0
60.0
70.0
-U/80
without indicator
170M1308
170M1309
170M1310
170M1311
170M1312
170M1313
170M1314
170M1315
170M1316
170M1317
170M1318
170M1319
170M1320
170M1321
170M1322
—
-/80
with indicator
170M1358
170M1359
170M1360
170M1361
170M1362
170M1363
170M1364
170M1365
170M1366
-TN/80 Type
T indicator for
microswitch
170M1408
170M1409
170M1410
170M1411
170M1412
170M1413
170M1414
170M1415
170M1416
170M1367
170M1368
170M1369
170M1370
170M1371
170M1372
170M2608
170M2609
170M2610
170M2611
170M2612
170M2613
170M2614
170M2615
170M2616
170M2617
170M2618
170M2619
170M2620
170M2621
170M1417
170M1418
170M1419
170M1420
170M1421
170M1422
170M2658
170M2659
170M2660
170M2661
170M2662
170M2663
170M2664
170M2665
170M2666
170M2667
170M2668
170M2669
170M2670
170M2671
High speed fuses
I²t (A²s)
Rated
current
(amps)
10
16
20
25
32
40
50
63
80
† Watts loss at rated current.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6310 (Size 000), 170K6312 (Size 00)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-39
4 — High speed fuses
170M — Square Body size 1* to 3, DIN 43653
690 Vac (IEC), 700 Vac (UL), 40 to 2000 A
Square body DIN 43653 bolted tags high speed fuses, for the
protection of DC common bus, DC drives, power converters/
rectifiers and reduced rated voltage starters. Available with visual
indicator, and Type K and T indicator for a microswitch.
Ratings
•
Volts
•
690 Vac (IEC)/700 Vac (UL)
•
750 Vdc (UL, see catalog number table for specific fuses)
•
Amps 40-2000 A
•
IR 200 kA RMS Sym.
Operating class aR
Agency information
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2*, E125085
•
CSA Class 53787, File 1422-30*
•
CCC except where noted
•
CE
* Consult your Bussmann series product representative for status.
Dimensions — mm
1mm = 0.0394”
Type -/80, -TN/80, -/110, -TN/110
Type -KN/80, -KN/110
Size
A
B
B1
C
C1
D2
E
H
Size
A
B
B3
C
C3
D
E
H
1*
50
104
134
78
108
58
45
22
1*
50
104
134
78
108
59
45
22
1
50
108
138
78
108
66
53
25
1
50
108
138
78
108
69
53
25
2
50
108
138
78
108
75
61
25
2
50
108
138
78
108
77
61
25
3
51
109
139
78
108
90
76
30
3
51
109
139
78
108
92
76
30
1 Valid for fuse Types -/110 and -TN/110.
2 Valid for fuse Types -TN/80 and -TN/110.
3 Valid for fuse Type -KN/110.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6314 (Size 1*), 170K6316 (Size 1),
170K6318 (Size 2), 170K6320 (Size 3)
4-40
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 1* to 3, DIN 43653
690 Vac (IEC), 700 Vac (UL), 40 to 2000 A
Fuse Rated
size voltage
1*
1
2
3
690 Vac (IEC)
700 Vac (UL)
690 Vac (IEC)
700 Vac (UL)
690 Vac (IEC)
700 Vac (UL)
690 Vac (IEC)
700 Vac (UL)
Rated
Watts
current
Clearing at loss -/80 with
(amps) Pre-arcing 660 Vac
(W)† indicator
40
40
270
9 170M3008
50
77
515
11 170M3009
63
115
770
14 170M3010
80
185
1250
18 170M3011
100
360
2450
21 170M3012
125
550
3700
26 170M3013
160
1100
7500
30 170M3014
200
2200
15,000
35 170M3015
250
4200
28,500
40 170M3016
315
7000
46,500
50 170M3017
350
10,000
68,500
55 170M3018
400
15,000
105,000
60 170M3019
450
21,000
140,000
65 170M3020
500
27,000
180,000
70 170M3021
550
34,000
230,000
75 170M3022
630
48,500
325,000
80 170M3023
200
1650
11,500
45 170M4008
250
3100
21,000
55 170M4009
315
6200
42,000
58 170M4010
350
8500
59,000
60 170M4011
400
13,500
91,500
65 170M4012
450
17,000
120,000
70 170M4013
500
25,000
170,000
72 170M4014
550
34,000
230,000
75 170M4015
630
52,000
350,000
80 170M4016
700
69,500
465,000
85 170M4017
800
105,000
725,000
95 170M4018
155,000
850,0002 100 170M40191
9002
400
11,000
74,000
65 170M5008
450
15,500
105,000
70 170M5009
500
21,500
145,000
75 170M5010
550
28,000
190,000
80 170M5011
630
41,000
275,000
90 170M5012
700
60,500
405,000
95 170M5013
800
86,000
575,000
105 170M5014
900
125,000
840,000
110 170M5015
1000
180,000 1,250,000
115 170M5016
11003
245,000 1,600,000 120 170M5017
12503
365,000 2,400,000 130 170M5018
500
14,000
95,000
95 170M6008
550
19,500
135,000 100 170M6009
630
31,000
210,000
105 170M6010
700
44,500
300,000
110 170M6011
800
69,500
465,000
115 170M6012
900
100,000
670,000 120 170M6013
1000
140,000
945,000 125 170M6014
1100
190,000 1,300,000 130 170M6015
1250
290,000 1,950,000 140 170M6016
1400
370,000 2,450,000 155 170M6017
1500
460,000 3,100,000 160 170M6018
1600
580,000 3,900,000 160 170M6019
18004
880,000 5,250,0004 165 170M6020††
20005 1,150,000 6,350,0005
175 170M6021
Catalog no.
-TN/80 Type
T indicator
for micro
170M3058
170M3059
170M3060
170M3061
170M3062
170M3063
170M3064
170M3065
170M3066
170M3067
170M3068
170M3069
170M3070
170M3071
170M3072
170M3073
170M4058
170M4059
170M4060
170M4061
170M4062
170M4063
170M4064
170M4065
170M4066
170M4067
170M4068
170M40691
170M5058
170M5059
170M5060
170M5061
170M5062
170M5063
170M5064
170M5065
170M5066
170M5067
170M5068
170M6058
170M6059
170M6060
170M6061
170M6062
170M6063
170M6064
170M6065
170M6066
170M6067
170M6068
170M6069
170M6070††
170M6071
-KN/80 Type
K indicator
for micro
170M3108
170M3109
170M3110
170M3111
170M3112
170M3113
170M3114
170M3115
170M3116
170M3117
170M3118
170M3119
170M3120
170M3121
170M3122
170M3123
170M4108
170M4109
170M4110
170M4111
170M4112
170M4113
170M4114
170M4115
170M4116
170M4117
170M4118
170M41191
170M5108
170M5109
170M5110
170M5111
170M5112
170M5113
170M5114
170M5115
170M5116
170M5117
170M5118
170M6108
170M6109
170M6110
170M6111
170M6112
170M6113
170M6114
170M6115
170M6116
170M6117
170M6118
170M6119
170M6120
170M6121
-/110 with
indicator
170M3158
170M3159
170M3160
170M3161
170M3162
170M3163
170M3164
170M3165
170M3166
170M3167
170M3168
170M3169
170M3170
170M3171
170M3172
170M3173
170M4158
170M4159
170M4160
170M4161
170M4162
170M4163
170M4164
170M4165
170M4166
170M4167
170M4168
170M41691
170M5158
170M5159
170M5160
170M5161
170M5162
170M5163
170M5164
170M5165
170M5166
170M5167
170M5168
170M6158
170M6159
170M6160
170M6161
170M6162
170M6163
170M6164
170M6165
170M6166
170M6167
170M6168
170M6169
170M6170††
170M6171
-TN/110 Type
T indicator
for micro
170M3208
170M3209
170M3210
170M3211
170M3212
170M3213
170M3214
170M3215
170M3216
170M3217
170M3218
170M3219
170M3220
170M3221
170M3222
170M3223
170M4208
170M4209
170M4210
170M4211
170M4212
170M4213
170M4214
170M4215
170M4216
170M4217
170M4218
170M42191
170M5208
170M5209
170M5210
170M5211
170M5212
170M5213
170M5214
170M5215
170M5216
170M5217
170M5218
170M6208
170M6209
170M6210
170M6211
170M6212
170M6213
170M6214
170M6215
170M6216
170M6217
170M6218
170M6219
170M6220††
170M6221
-KN/110
Type K
indicator for
micro
170M3258
170M3259
170M3260
170M3261
170M3262
170M3263
170M3264
170M3265
170M3266
170M3267
170M3268
170M3269
170M3270
170M3271
170M3272
170M3273
170M4258
170M4259
170M4260
170M4261
170M4262
170M4263
170M4264
170M4265
170M4266
170M4267
170M4268
170M42691
170M5258
170M5259
170M5260
170M5261
170M5262
170M5263
170M5264
170M5265
170M5266
170M5267
170M5268
170M6258
170M6259
170M6260
170M6261
170M6262
170M6263
170M6264
170M6265
170M6266
170M6267
170M6268
170M6269
170M6270
170M6271
† Watts loss at rated current.
†† DC voltage rated at 750 Vdc, IR 130 kA DC, UL Recognized, File E12085.
1 Not UL Recognized, 2 Rated voltage: 550 Vac IEC, 3 Rated voltage: 600 Vac IEC, 700 Vac UL, 4 Rated voltage: 600 Vac IEC, 500 Vac UL, 5 Rated voltage: 550 Vac IEC,
500 Vac UL.
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 170K6314 (Size 1*), 170K6316 (Size 1),
170K6318 (Size 2), 170K6320 (Size 3)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-41
High speed fuses
I²t (A²s)
4 — High speed fuses
170M — Square Body size 00, DIN 43653
1000 Vac (IEC and UL), 20 to 315 A
Square body DIN 43653 bolted tags high speed fuses, for the
protection of DC common bus, DC drives, power converters/
rectifiers and reduced rated voltage starters. Available with indicator
or Type T indicator for a microswitch.
Ratings
•
Volts
•
1000 Vac (IEC and UL 20-250 A)
•
900 Vac (IEC, 315 A)
•
Amps 20-315 A
•
IR 125 kA RMS Sym.
Operating class aR
Agency information
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, E125085, JFHR2 (20-250 A)
•
CSA Class 53787, File 1422-30 (20-250 A)
•
CE
Fuse size Rated voltage
00
1000 Vac (IEC/UL)
900 Vac (IEC)
Rated
current
(amps)
20
25
32
35
40
50
63
80
100
125
160
200
250
315
I²t (A²s)
Pre-arcing
20
30
55
69
100
170
280
500
950
1500
3000
5600
10,000
18,000
Clearing at
rated voltage
140
210
390
500
690
1200
2000
3500
6850
11,500
22,000
40,500
74,000
115,000
Watts
loss
(W)†
5
7
9
10
11
13
18
22
25
33
37
40
48
58
Catalog no.
00/80 with indicator
170M4802
170M4803
170M4804
170M4805
170M4806
170M4807
170M4808
170M4809
170M4810
170M4811
170M4812
170M4813
170M4814
170M4815
00TN/80 Type T indicator for
micro
170M4822
170M4823
170M4824
170M4825
170M4826
170M4827
170M4828
170M4829
170M4830
170M4831
170M4832
170M4833
170M4834
170M4835
† Watts loss at rated current.
Dimensions — mm
2.0
28.0
Indicator
10.0
78.0
Tag for microswitch
27.0
54.0
98.0
27.0
45.0
47.7
10.0
30.0
65.5
For details on electrical characteristics, contact Application Engineering and ask for Data sheet no. 170K8504
4-42
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 1* to 3, DIN 43653
1000 Vac (IEC and UL), 50 to 1400 A
Square body DIN 43653 bolted tags high speed fuses, for the
protection of DC common bus, DC drives, power converters/
rectifiers and reduced rated voltage starters. Available with a Type T
or K indicator for a microswitch.
Ratings
•
Volts
•
1000 Vac (IEC, 50-1250 A), 900 Vac (IEC, 1400 A)
•
1000 Vac (UL size 2, size 3, 315-1100 A only)
•
900 Vdc (UL, see catalog number table for specific fuses)
•
Amps 50-1400 A
•
IR 125 kA RMS Sym.
Operating class aR
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085 (only sizes 2 and 3)
•
CCC (only size 3, 315-1100 A)
•
CE
High speed fuses
Agency Information
Dimensions — mm
C
A
C
E
A
Indicator
E
D1
H
D1
G
G
H
E
J
Type -KN/110
T
B
E
J
Type -TN/110
B
Type -KN/110
Size
1*KN/110
1KN/110
2KN/110
3KN/110
Type -TN/110
A
80
80
80
81
B
138
138
138
139
C
108
108
108
108
D1 (max)
61
69
77
92
E
43
51
59
74
G
6
6
6
6
H
22
25
25
30
J
11
11
11
11
Size
1*TN/110
1TN/110
2TN/110
3TN/110
A
80
80
80
81
B
138
138
138
139
C
108
108
108
108
D1 (max)
61
69
75
90
E
43
51
59
74
G
6
6
6
6
H
22
25
25
30
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K8564 (Size 1*), 170K8566 (Size 1),
170K8568 (Size 2), 170K8570 (Size 3)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-43
J
11
11
11
11
4 — High speed fuses
170M — Square Body size 1* to 3, DIN 43653
1000 Vac (IEC and UL), 50 to 1400 A
Fuse size
Rated voltage
1*
1000 Vac (IEC)
1
1000 Vac (IEC)
2
1000 Vac (IEC and UL)
1000 Vac (IEC and UL)
3
1000 Vac (IEC)
900 Vac (IEC)
Rated
current
(amps)
50
63
80
100
125
160
200
250
315
350
400
160
200
250
315
350
400
450
500
550
630
250
315
350
400
450
500
550
630
700
800
315
350
400
450
500
550
630
700
800
900
1000
1100
1250
1400
I²t (A²s)
Clearing at
Pre-arcing rated voltage
135
815
215
1300
460
2750
860
5100
1450
8600
2850
17,500
4950
29,500
9550
57,000
21,500
130,000
29,000
175,000
42,000
250,000
2200
13,500
4150
24,500
7750
46,000
16,500
98,500
21,500
130,000
31,000
185,000
44,500
265,000
63,000
375,000
84,500
500,000
125,000
755,000
6750
13,500
16,500
26,000
35,500
49,500
66,000
93,500
130,000
195,000
9200
13,000
19,000
27,000
37,500
52,000
82,500
115,000
170,000
250,000
340,000
460,000
575,000
795,000
40,000
81,500
99,000
155,000
210,000
295,000
390,000
555,000
770,000
1,200,000
54,500
77,500
115,000
160,000
225,000
310,000
490,000
700,000
1,050,000
1,500,000
2,050,000
2,750,000
3,400,000
4,200,000
Watts
loss
(W)†
20
25
30
35
40
45
50
55
65
70
75
40
45
52
60
65
70
80
85
90
98
65
75
80
85
90
95
100
110
115
125
90
95
105
107
110
115
120
125
135
145
150
155
175
185
Catalog no.
-KN/110 Type K indicator
-TN/110 Type T indicator
for microswitch
for microswitch
170M3965
170M3981
170M3966
170M3982
170M3967
170M3983
170M3968
170M3984
170M3969
170M3985
170M3970
170M3986
170M3971
170M3987
170M3972
170M3988
170M3973
170M3989
170M3974
170M3990
170M3975
170M3991
170M4965
170M4980
170M4966
170M4981
170M4967
170M4982
170M4968
170M4983
170M4969
170M4984
170M4970
170M4985
170M4971
170M4986
170M4972
170M4987
170M4973
170M4988
170M4974
170M4989
170M5966
170M5967
170M5968
170M5969
170M5970
170M5971
170M5972
170M5973
170M5974
170M5975
170M8614
170M8615
170M8616
170M8617
170M8618
170M8619
170M8620
170M8621
170M8622
170M8623
170M8624
170M8625
170M8626
170M8627
170M5981
170M5982
170M5983
170M5984
170M5985
170M5986
170M5987
170M5988
170M5989
170M5990
170M8629††
170M8630††
170M8631††
170M8632††
170M8633††
170M8634††
170M8635††
170M8636††
170M8637††
170M8638††
170M8639††
170M8640††
170M8641
170M8642
† Watts loss at rated current.
†† DC voltage rated at 900 Vdc, UL Recognized, File E125085.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K8564 (Size 1*), 170K8566 (Size 1),
170K8568 (Size 2), 170K8570 (Size 3)
4-44
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 1* to 3, DIN 43653
1250 Vac (IEC), 1300 Vac (UL), 50 to 1400 A
Square body DIN 43653 bolted tags high speed fuses, for the
protection of DC common bus, DC drives, power converters/
rectifiers and reduced rated voltage starters.
Ratings
Volts
•
•
1100 to 1300 Vac (see catalog number table)
•
900 and 1000 Vdc (UL, see catalog number table for specific
fuses)
•
Amps 50-1400 A
•
IR 100 kA RMS Sym.
Operating class aR
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2*, E125085
•
CSA Class 53787, File 1422-30*
•
CE
High speed fuses
Agency information
* Consult your Bussmann series product representative for status.
Dimensions — mm
1mm = 0.0394”
Type-/110-TN/110
Size
1*
1
2
3
A
80
80
80
81
Type-KN/110
B
138
138
138
139
C
108
108
108
108
D1
58
66
75
90
E
45
53
61
76
H
20
25
25
30
K
11
11
11
11
Size
1*
1
2
3
A
80
80
80
81
B
138
138
138
139
C
108
108
108
108
D
60
69
77
92
E
45
53
61
76
H
20
25
25
30
K
11
11
11
11
1 Clip on microswitch valid for -TN/110 fuses.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6630 (Size 1*), 170K6632 (Size 1),
170K6634 (Size 2), 170K6636 (Size 3)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-45
4 — High speed fuses
170M — Square Body size 1* to 3, DIN 43653, 170M
1250 Vac (IEC), 1300 Vac (UL), 50 to 1400 A
I²t (A²s)
Fuse
size
Rated voltage
1*
1250 Vac (IEC)
1300 Vac (UL)
1
1250 Vac (IEC)
1300 Vac (UL)
1100 Vac (IEC)
2
1250 Vac (IEC)
1300 Vac (UL)
1100 Vac (IEC/UL)
1300 Vac (UL)
3
1100 Vac (IEC)
Rated
current
(amps)
50
63
80
100
125
160
200
250
315
350
400
160
200
-/110 with
indicator
170M3138
170M3139
170M3140
170M3141
170M3142
170M3143
170M3144
170M3145
170M3146
170M3147
170M3148
170M4138††
170M4139††
Catalog no.
-TN/110 Type
T indicator for
microswitch
170M3188
170M3189
170M3190
170M3191
170M3192
170M3193
170M3194
170M3195
170M3196
170M3197
170M3198
170M4188††
170M4189††
-KN/110 Type
K indicator for
microswitch
170M3238
170M3239
170M3240
170M3241
170M3242
170M3243
170M3244
170M3245
170M3246
170M3247
170M3248
170M4238††
170M4239††
Pre-arcing
135
215
420
750
1450
2600
5150
9200
18,500
27,000
53,000
1900
3800
Clearing at
1000 Vac
815
1300
2500
4450
9000
16,000
31,000
54,500
115,000
165,000
265,000
11,500
22,500
Clearing at
1250 Vac
1100
1750
3350
5950
11,500
21,000
41,000
73,000
150,000
220,000
335,000
15,500
30,000
Watts
loss
(W)†
15
20
25
30
35
40
45
55
60
65
70
45
50
250
315
350
400
450
500
550
630
250
280
315
350
400
450
500
550
630
700
800
7750
15,000
20,000
29,500
42,000
69,500
95,000
130,000
6500
9350
13,000
16,500
23,000
34,000
48,000
62,000
115,000
160,000
245,000
46,000
90,000
125,000
175,000
250,000
340,000
465,000
660,000
38,500
55,500
77,500
97,500
140,000
205,000
285,000
370,000
575,000
795,000
1,200,000
61,500
120,000
165,000
235,000
335,000
435,000
590,000
N/A
51,500
74,500
105,000
135,000
180,000
270,000
380,000
495,000
730,000
1,050,000
1,550,000
60
65
70
75
80
85
95
100
65
70
75
80
85
90
95
100
120
125
130
170M4140††
170M4141††
170M4142††
170M4143††
170M4144††
170M4145
170M4146
170M41471
170M5138
170M5139
170M5140
170M5141
170M5142
170M5143
170M5144
170M5145
170M5146††
170M5147††
170M5148††
170M4190††
170M4191††
170M4192††
170M4193††
170M4194††
170M4195
170M4196
170M41971
170M5188
170M5189
170M5190
170M5191
170M5192
170M5193
170M5194
170M5195
170M5196††
170M5197††
170M5198††
170M4240††
170M4241††
170M4242††
170M4243††
170M4244††
170M4245
170M4246
170M42471
170M5238
170M5239
170M5240
170M5241
170M5242
170M5243
170M5244
170M5245
170M5246
170M5247
170M5248
900
1000
315
350
400
450
500
550
630
700
360,000
480,000
9500
13,500
19,500
31,000
39,000
55,000
83,500
115,000
1,750,000
2,350,000
58,000
81,500
120,000
185,000
235,000
325,000
495,000
705,000
N/A
N/A
77,500
110,000
160,000
245,000
310,000
435,000
665,000
940,000
135
145
85
90
95
100
105
110
115
120
170M5149††
170M5150††
170M6138††
170M6139††
170M6140††
170M6141††
170M6142††
170M6143††
170M6144††
170M6145††
170M5199††
170M5200††
170M6188††
170M6189††
170M6190††
170M6191††
170M6192††
170M6193††
170M6194††
170M6195††
170M5249††
170M5250††
170M6238††
170M6239††
170M6240††
170M6241††
170M6242††
170M6243††
170M6244††
170M6245††
800
900
1000
1100
1250
205,000
305,000
450,000
575,000
810,000
995,000
1,500,000
2,150,000
2,800,000
3,950,000
1,300,000
1,900,000
2,750,000
3,600,000
N/A
125
130
135
160
170
1400
1,250,000
6,000,000
N/A
175
170M6146†††
170M6147†††
170M6148†††
170M6149†††
170M61501,††
170M61511,††
170M6196†††
170M6197†††
170M6198†††
170M6199†††
170M62001
170M62011
170M62461
170M62471
170M62481
170M62491
170M62501
170M62511
† Watts loss at rated current.
†† DC voltage rated at 900 Vdc, UL Recognized, File E125085.
††† DC voltage rated at 1000 Vdc, UL Recognized, File E125085.
1 Not UL Recognized.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6630 (Size 1*), 170K6632 (Size 1), 170K6634 (Size 2), 170K6636 (Size 3)
4-46
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 00 to 3, DIN 43620, full
range (gR)
690 Vac (IEC), 10 to 800 A
Square body DIN 43653 blade high speed fuses. Full range
protection fuses provide both overload and short-circuit protection.
Fuses come with Type T indicator for a microswitch.
Ratings
•
Volts 690 Vac (IEC)
•
Amps 10-800 A
•
IR 200 kA RMS Sym.
Operating class gR
Agency information
•
Designed and tested to IEC 60269 Part 4
•
CE
High speed fuses
Dimensions — mm
Size
00
A
49
B
78.5
D (max)
60
E (max)
30
F
35
G
6
H (min)
15
1
2
3
68
68
68
135
150
150
66
74
89
52
60
75
40
48
60
6
6
6
20
25
32
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6412 (Size 00), 170K6416 (Size 1),
170K6418 (Size 2), 170K6420 (Size 3)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-47
4 — High speed fuses
170M — Square Body size 00 to 3, DIN 43620, full range (gR)
690 Vac (IEC), 10 to 800 A
Fuse
size
I²t (A²s)
Rated voltage
00
690 Vac (IEC)
1
690 Vac (IEC)
2
690 Vac (IEC)
3
690 Vac (IEC)
Rated current (amps)1
10
16
20
25
32
40
50
63
80
100
125
160
50
63
80
100
125
160
200
250
315
350
400
200
250
315
350
400
450
500
550
630
350
400
450
500
550
630
700
800
Pre-arcing
3.8
7.2
13.0
24.0
53.0
95.0
185.0
345.0
695.0
1250.0
2300.0
4350.0
135.0
245.0
500.0
950.0
1850.0
3450.0
6750.0
13,500.0
26,000.0
34,000.0
48,500.0
5650.0
10,000.0
19,500.0
26,000.0
39,500.0
55,500.0
73,000.0
100,000.0
150,000.0
23,000.0
34,000.0
48,500.0
64,000.0
84,500.0
125,000.0
160,000.0
245,000.0
Clearing at 690 Vac
20
38
70
125
275
490
1000
1800
3600
6650
12,000
22,500
705
1300
2600
4850
9500
18,000
34,500
70,500
135,000
175,000
250,000
29,000
52,500
105,000
135,000
205,000
290,000
375,000
515,000
770,000
120,000
175,000
250,000
330,000
435,000
645,000
840,000
1,300,000
Watts
loss
(W)†
3.5
5.5
6.0
8.0
9.0
10.0
11.0
14.0
16.0
19.0
23.0
29.0
12.0
15.0
17.0
20.0
23.0
28.0
31.0
35.0
41.0
45.0
48.0
33.0
40.0
46.0
50.0
53.0
59.0
66.0
70.0
79.0
55.0
59.0
62.0
67.0
70.0
85.0
93.0
99.0
Catalog no.
- Type T indicator for microswitch
170M2691
170M2692
170M2693
170M2694
170M2695
170M2696
170M2697
170M2698
170M2699
170M2700
170M2701
170M2702
170M4176
170M4177
170M4178
170M4179
170M4180
170M4181
170M4182
170M4183
170M4184
170M4185
170M4186
170M5881
170M5882
170M5883
170M5884
170M5885
170M5886
170M5887
170M5888
170M5889
170M6080
170M6081
170M6082
170M6083
170M6084
170M6085
170M6086
170M6087
† Watts loss at rated current.
1 The RMS Amp rating of this fuses range is given with open fuse blocks connected to copper conductors according to IEC 60269, Part 1, table 10. When used in
enclosed fuse blocks/disconnects, derating factors have to be observed. Please contact Eaton's Bussmann Division for application assistance bulehighspeedtechnical@
eaton.com.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6412 (Size 00), 170K6416 (Size 1),
170K6418 (Size 2), 170K6420 (Size 3)
4-48
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 000 to 3, DIN 43620,
dual indicator fuses
690 Vac (IEC), 700 Vac (UL), 10 to 1600 A
Square body DIN 43620 blade high speed fuses with dual indicator
system: one indicator in the fuse body and another one in the
metallic end plate. Interchangeable with existing high speed DIN
43620 fuses for the protection of UPS, soft starters, solid state
relays, variable speed drives, rectifiers and inverters.
Ratings
Volts
•
•
690 Vac (IEC)
•
700 Vac (UL)
•
Amps 10-1600 A
•
IR 200 kA RMS Sym.
•
gR (size 000, 10-63 A)
•
aR (others)
High speed fuses
Operating class
Agency information
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085
•
CSA Class 1422-30, (53787) with the exception of catalog number
170M4867D
•
CE
Dimensions — mm
Size
A
B
000 78.5 53.0
00
78.5 53.0
1
135.0 71.4
2
150.0 71.4
3
150.0 72.4
C
15.0
15.0
20.0
25.1
32.0
D
52
59
64
72
87
E
35
35
40
48
60
F
10
10
10
10
10
G
49.7
49.7
67.5
67.5
68.5
H
1.5
2.0
2.0
2.0
2.5
J
6
6
6
6
6
K
20.5
30.0
40.0
54.0
71.0
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6386 (Size 000 and 00),
170K6388 (Size 1), 170K6390 (Size 2), 170K6392 (Size 3)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-49
4 — High speed fuses
170M — Square Body size 000 to 3, DIN 43620, dual indicator fuses
690 Vac (IEC), 700 Vac (UL), 10 to 1600 A
Fuse size
Rated voltage
000
690 Vac (IEC)
700 Vac (UL)
00
690 Vac (IEC) /700 Vac (UL)
1
690 Vac (IEC)
700 Vac (UL)
2
690 Vac (IEC)
700 Vac (UL)
3
690 Vac (IEC)
700 Vac (UL)
Rated
current
(amps)
10
16
20
25
32
40
50
63
80
100
125
160
200
250
315
40
50
63
80
100
125
160
200
250
315
350
400
450
500
550
630
700
400
450
500
550
630
700
800
900
1000
1100
500
550
630
700
800
900
1000
1100
1250
1400
1500
1600
Max permissible
load current
10
16
20
25
32
40
50
63
80
100
125
160
200
250
315
25
30
38
50
60
75
95
120
150
I2t (A2s)
Pre-arcing
190
210
240
270
300
330
380
420
240
270
300
330
380
420
480
540
600
660
300
330
380
420
480
540
600
660
750
840
900
960
4
7
11.5
19
40
65
115
215
380
695
1180
2300
4350
7900
12,000
40
78
120
185
360
550
1150
2300
4350
7300
10,000
16,000
21,500
27,000
33,500
48,500
69,500
11,000
16,000
21,500
29,000
41,000
60,500
86,000
125,000
180,000
245,000
14,000
19,500
31,000
45,000
69,500
100,000
140,000
190,000
300,000
380,000
470,000
585,000
Watts
Clearing at 690 Vac loss (W)3
27
2.5
51
4
82.5
5
140
6
285
7
490
8.5
815
9.5
1550
11.5
2700
15
4950
16.5
8250
21.5
16,500
25
31,000
29.5
56,000
35.5
84,500
45
285
4
550
4.5
850
6.5
1350
8.5
2600
10
3900
11
8250
12
16,500
12.5
31,000
16
Catalog no.
170M1558D
170M1559D
170M1560D
170M1561D
170M1562D
170M1563D
170M1564D
170M1565D
170M1566D
170M1567D
170M1568D
170M1569D
170M1570D
170M1571D
170M1572D
170M3808D
170M3809D
170M3810D
170M3811D
170M3812D
170M3813D
170M3814D
170M3815D
170M3816D
52,000
73,000
115,000
155,000
190,000
240,000
345,000
495,000
79,000
115,000
155,000
215,000
295,000
430,000
610,000
895,000
1,300,000
1,750,000
99,500
140,000
220,000
320,000
490,000
720,000
985,000
1,400,000
2,150,000
2,700,000
3,350,000
4,150,000
170M3817D
170M3818D
170M3819D
170M4863D
170M4864D
170M4865D
170M4866D
170M4867D1
170M5808D
170M5809D
170M5810D
170M5811D
170M5812D
170M5813D
170M5814D
170M5820D
170M5816D
170M5817D
170M6808D
170M6809D
170M6810D
170M6811D
170M6812D
170M6813D
170M6814D
170M6892D
170M8554D
170M8555D
170M8556D
170M8557D
20
21.5
23
26.5
28.5
33
37.5
39
29
32
34
36
42
43
48
52
53
56
43
44
45
46
48
50
56
57
61
70
72
74
1 170M4867D is not UL Recognized.
3 Given at maximum load rated current, please refer to data sheets for further details.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6386 (Size 000 and 00),
170K6388 (Size 1), 170K6390 (Size 2), 170K6392 (Size 3)
4-50
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 00, DIN 43620
1000 Vac (IEC and UL), 20 to 225 A
Square body DIN 43620 blade style high speed fuses for the
protection of DC common bus, DC drives, power converters/rectifiers
and reduced rated voltage starters. Fuses come with Type T indicator
for microswitches.
Ratings
Volts
•
•
1000 Vac (IEC and UL)
•
900 Vac (200 and 225 A)
•
Amps 20-225 A
•
IR 125 kA RMS Sym.
Operating class aR
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized (20-160 A)
•
CSA (20-160 A)
•
CE
I²t (A²s)
Fuse size
Rated voltage
00
1000 Vac (IEC/UL)
00
900 Vac (IEC)
Rated current (amps)
20
25
32
35
40
50
63
80
100
125
160
200
225
Pre-arcing
15
28.5
53
69
105
215
380
815
1550
3000
6250
12,000
18,000
Clearing at 1000 Vac
110
210
390
500
760
1550
2750
5900
11,500
22,000
45,000
86,500
115,000
Watts loss (W)†
8.5
9.5
11
12
13
14
16
18
21
23
26
31
33
Catalog no. with
Type T indicator
for microswitch
170M2673
170M2674
170M2675
170M2676
170M2677
170M2678
170M2679
170M2680
170M2681
170M2682
170M2683
170M2684
170M2685
† Watts loss at rated current.
Dimensions — mm
20.0
10.0
47.5
2.5
Indicator
60 35.0
48
15.0
52.0
78.5
6.0
30.0
For details on electrical characteristics, contact Application Engineering and ask for Data sheet no. 170K8506
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-51
High speed fuses
Agency information
4 — High speed fuses
170M — Square Body size 1* to 3, French style
690 Vac (IEC), 700 Vac (UL), 40 to 1600 A
Square body French style high speed fuses for the protection of DC
common bus, DC drives, power converters/rectifiers and reduced
rated voltage starters. Available with Type T or K indicators for
microswitches.
Ratings
Volts
•
•
690 Vac (IEC)
•
700 Vac (UL)
•
Amps 40-1600 A
•
IR 200 kA RMS Sym.
Operating class aR
Agency information
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085
•
CSA Class 1422-30, (53787) on sizes (1, 2, 3) only
•
CCC (please consult bulehighspeedtechnical@eaton.com for
status)
•
CE
Dimensions — mm
Type -E/-, -EKN/Size
1*
1
2
3
A
50
50
50
51
B
102
111
126
126
C
76
86
91
91
D
59
69
77
92
E
45
53
61
76
H
18
25
30
36
J
9
11
13
13
K
13
11
12
13
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6314 (Size 1*), 170K6316 (Size 1),
170K6318 (Size 2), 170K6320 (Size 3)
4-52
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M —Square Body size 1* to 3, French style
690 Vac (IEC), 700 Vac (UL), 40 to 1600 A
Fuse size
1*
1
2
3
690 Vac (IEC)
700 Vac (UL)
690 Vac (IEC)
700 Vac (UL)
690 Vac (IEC)
700 Vac (UL)
690 Vac (IEC)
700 Vac (UL)
Rated current
(amps)
40
50
63
80
100
125
160
200
250
315
350
400
450
500
200
250
315
350
400
450
500
550
630
700
800
400
450
500
550
630
700
800
900
1000
500
550
630
700
800
900
1000
1100
1250
1400
1500
1600
Pre-arcing
40
77
115
185
360
550
1100
2200
4200
7000
10,000
15,000
21,000
Clearing at
660 Vac
270
515
770
1250
2450
3700
7500
15,000
28,500
46,500
68,500
105,000
140,000
Watts
loss
(W)†
9
11
14
18
21
26
30
35
40
50
55
60
65
27,000
1650
3100
6200
8500
13,500
17,000
25,000
34,000
52,000
69,500
105,000
11,000
15,500
21,500
28,000
41,000
60,500
86,000
125,000
180,000
14,000
19,500
31,000
44,500
69,500
100,000
140,000
190,000
290,000
370,000
460,000
580,000
180,000
11,500
21,000
42,000
59,000
91,500
120,000
170,000
230,000
350,000
465,000
725,000
74,000
105,000
145,000
190,000
275,000
405,000
575,000
840,000
1,250,000
95,000
135,000
210,000
300,000
465,000
670,000
945,000
1,300,000
1,950,000
2,450,000
3,100,000
3,900,000
70
45
55
58
60
65
70
72
75
80
85
95
65
70
75
80
90
95
105
110
115
95
100
105
110
115
120
125
130
140
155
160
160
Catalog no.
-E/- Type T indicator for
microswitch
170M3308
170M3309
170M3310
170M3311
170M3312
170M3313
170M3314
170M3315
170M3316
170M3317
170M3318
170M3319
170M3320
170M3321
170M4308
170M4309
170M4310
170M4311
170M4312
170M4313
170M4314
170M4315
170M4316
170M4317
170M4318
170M5308
170M5309
170M5310
170M5311
170M5312
170M5313
170M5314
170M5315
170M5316
170M6308
170M6309
170M6310
170M6311
170M6312
170M6313
170M6314
170M6315
170M6316
170M6317
170M6318
170M6319
-EKN/- Type K indicator for
microswitch
170M3358
170M3359
170M3360
170M3361
170M3362
170M3363
170M3364
170M3365
170M3366
170M3367
170M3368
170M3369
170M3370
170M3371
170M4358
170M4359
170M4360
170M4361
170M4362
170M4363
170M4364
170M4365
170M4366
170M4367
170M4368
170M5358
170M5359
170M5360
170M5361
170M5362
170M5363
170M5364
170M5365
170M5366
170M6358
170M6359
170M6360
170M6361
170M6362
170M6363
170M6364
170M6365
170M6366
170M6367
170M6368
170M6369
High speed fuses
I²t (A²s)
Rated
voltage
† Watts loss at rated current.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6314 (Size 1*), 170K6316 (Size 1),
170K6318 (Size 2), 170K6320 (Size 3)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-53
4 — High speed fuses
170M — Square Body size 1* to 3, US style
690 Vac (IEC), 700 Vac (UL), 40 to 2000 A
Square body US style bolted tags high speed fuses for the
protection of DC common bus, DC drives, power converters/
rectifiers and reduced rated voltage starters. Available with Type K
indicator for a microswitch.
Ratings
•
Volts
•
500 to 700 Vac (see catalog number table)
•
750 Vdc (UL, see catalog number table for specific fuses)
•
Amps 40-2000 A
•
IR 200 kA RMS Sym.
Operating class aR
Agency information
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2*, E125085
•
CSA Class 53787, File 1422-30*
•
CCC*
•
CE
* Consult your Bussmann series product representative for status.
Dimensions — mm
1mm = 0.0394”
B
E
G
D
A
C1
C2
J H
Type -FU/-, -FKE/-, FU/115-, -FKE/115
Size
1*
1
2
3
A
50
50
50
51
B
110
136
135
135
B1 C1
148 85
157 104
159 105
155 106
C1†
123
126
125
125
C2
72
78
78
77
C2†
110
100
99
97
D
59
69
77
92
E
45
53
61
76
G
6
6
6
6
H
20
25
25
36
J
10
14
14
16
† Valid for fuss types -FU/115 and -FKE/115.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6314 (Size 1*), 170K6316 (Size 1),
170K6318 (Size 2), 170K6320 (Size 3)
4-54
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 1* to 3, US style
Fuse
size
1*
Rated voltage
690 Vac (IEC)
700 Vac (UL)
690 Vac (IEC)
1
700 Vac (UL)
550 Vac (IEC)
690 Vac (IEC)
2
700 Vac (UL)
600 Vac (IEC)
700 Vac (UL)
690 Vac (IEC)
700 Vac (UL)
3
600 Vac (IEC)
500 Vac (UL)
550 Vac (IEC)
500 Vac (UL)
I²t (A²s)
Rated
current
Clearing at
Watts
-FU/- without
(amps) Pre-arcing
660 Vac
loss (W)† indicator
40
40
270
9
170M3608
50
70
515
11
170M3609
63
115
770
14
170M3610
80
185
1250
18
170M3611
100
360
2450
21
170M3612
125
550
3700
26
170M3613
160
1100
7500
30
170M3614
200
2200
15,000
35
170M3615
250
4200
28,500
40
170M3616
315
7000
46,500
50
170M3617
350
10,000
68,500
55
170M3618
400
15,000
105,000
60
170M3619
450
21,000
140,000
65
170M3620
500
27,000
180,000
70
170M3621
550
34,000
230,000
75
170M3622
630
48,500
325,000
80
170M3623
200
1650
11,500
45
170M4608
250
3100
21,000
55
170M4609
315
6200
42,000
58
170M4610
350
8500
59,000
60
170M4611
400
13,500
91,500
65
170M4612
450
17,000
120,000
70
170M4613
500
25,000
170,000
72
170M4614
550
34,000
230,000
75
170M4615
630
52,000
350,000
80
170M4616
700
69,500
465,000
85
170M4617
800
105,000
725,000
95
170M4618
900
155,000
850,000
100
170M4619
400
11,000
74,000
65
170M5608
450
15,500
105,000
70
170M5609
500
21,500
145,000
75
170M5610
550
28,000
190,000
80
170M5611
630
41,000
275,000
90
170M5612
700
60,500
405,000
95
170M5613
800
86,000
575,000
105
170M5614
900
125,000
840,000
110
170M5615
1000
180,000
1,250,000
115
170M5616
1100
245,000
1,600,000
120
170M5617
1250
365,000
2,400,000
130
170M5618
Catalog no.
-FKE/- Type K
indicator for
-FU/115 without
microswitch
indicator
170M3658
170M3708
170M3659
170M3709
170M3660
170M3710
170M3661
170M3711
170M3662
170M3712
170M3663
170M3713
170M3664
170M3714
170M3665
170M3715
170M3666
170M3716
170M3667
170M3717
170M3668
170M3718
170M3669
170M3719
170M3670
170M3720
170M3671
170M3721
170M3672
170M3722
170M3673
170M3723
170M4658
170M4708
170M4659
170M4709
170M4660
170M4710
170M4661
170M4711
170M4662
170M4712
170M4663
170M4713
170M4664
170M4714
170M4665
170M4715
170M4666
170M4716
170M4667
170M4717
170M4668
170M4718
170M4669
170M4719
170M5658
170M5708
170M5659
170M5709
170M5660
170M5710
170M5661
170M5711
170M5662
170M5712
170M5663
170M5713
170M5664
170M5714
170M5665
170M5715
170M5666
170M5716
170M5667
170M5717
170M5668
170M5718
-FKE/115 Type
K indicator for
microswitch
170M3758
170M3759
170M3760
170M3761
170M3762
170M3763
170M3764
170M3765
170M3766
170M3767
170M3768
170M3769
170M3770
170M3771
170M3772
170M3773
170M4758
170M4759
170M4760
170M4761
170M4762
170M4763
170M4764
170M4765
170M4766
170M4767
170M4768
170M4769
170M5758
170M5759
170M5760
170M5761
170M5762
170M5763
170M5764
170M5765
170M5766
170M5767
170M5768
500
550
630
700
800
900
1000
1100
1250
1400
1500
1600
14,000
19,500
31,000
44,500
69,500
100,000
140,000
190,000
290,000
370,000
460,000
580,000
95,000
135,000
210,000
300,000
465,000
670,000
945,000
1,300,000
1,950,000
2,450,000
3,100,000
3,900,000
95
100
105
110
115
120
125
130
140
155
160
160
170M6608
170M6609
170M6610
170M6611
170M6612
170M6613
170M6614
170M6615
170M6616
170M6617
170M6618
170M6619
170M6658
170M6659
170M6660
170M6661
170M6662
170M6663
170M6664
170M6665
170M6666
170M6667
170M6668
170M6669
170M6708
170M6709
170M6710
170M6711
170M6712
170M6713
170M6714
170M6715
170M6716
170M6717
170M6718
170M6719
170M6758
170M6759
170M6760
170M6761
170M6762
170M6763
170M6764
170M6765
170M6766
170M6767
170M6768
170M6769
1800
880,000
5,250,000
165
170M6620††
170M66701
170M6720††
170M6770
2000
1,150,000
6,350,000
175
170M6621
170M66712
170M6721
170M6771
† Watts loss at rated current.
†† DC voltage rated at 750 Vdc, UL Recognized, File E125085.
1 170M6670 600 Vac (IEC)/550 Vac.
2 170M6671 550 Vac (IEC and UL).
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6314 (Size 1*), 170K6316 (Size 1),
170K6318 (Size 2), 170K6320 (Size 3)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-55
High speed fuses
690 Vac (IEC), 700 Vac (UL), 40 to 2000 A
4 — High speed fuses
170M — Square Body size 1* to 3, US style
1000 Vac (IEC), 50 to 1400 A
Square body US style bolted tags high speed fuses for the
protection of DC common bus, DC drives, power converters/
rectifiers and reduced rated voltage starters. Fuses come with Type
K indicator for microswitches.
Ratings
•
Volts 1000 Vac (IEC) (1400 A 900 Vac)
•
Amps 50-1400 A
•
IR 125 kA RMS Sym.
Operating class aR
Agency information
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085 for size 2 and 3 (315-1100 A)
•
CSA Class 53787, File 1422-30 for size 2 and 3 (315-1100 A)
•
CCC approval for size 2 only
•
CE
Dimensions — mm
1mm = 0.0394”
Size
1*FKE/115
1FKE/115
2FKE/115
3FKE/115
A
74
76
76
76
B
C
101.0 130.0
102.0 128.0
101.1 127.5
101.1 127.5
D
156
160
160
158
F
43
51
59
74
G
60
68
76
91
H
10.4
14.3
14.4
16.0
I
20
25
25
36
K
6
6
6
6
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K8564 (Size 1*), 170K8566 (Size 1),
170K8568 (Size 2), 170K8570 (Size 3)
4-56
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 1* to 3, US style, 170M
1000 Vac (IEC), 50 to 1400 A
Fuse size
Rated voltage
1*
1000 Vac (IEC)
1
2
1000 Vac (IEC)
1000 Vac (IEC/UL)
1000 Vac (IEC/UL)
3
1000 Vac (IEC)
900 Vac (IEC)
Rated current (amps)
50
63
80
100
125
160
200
250
315
350
400
Pre-arcing
135
215
460
860
1450
2850
4950
9550
21,500
29,000
42,000
Watts
Clearing at 1000 Vac loss (W)†
815
20
1300
25
2750
30
5100
35
8600
40
17,500
45
29,500
50
57,000
55
130,000
65
175,000
70
250,000
75
Catalog no.
-FKE/115 Type K indicator for
microswitch
170M3531
170M3532
170M3533
170M3534
170M3535
170M3536
170M3537
170M3538
170M3539
170M3540
170M3541
160
200
250
315
350
400
450
500
550
630
2200
4150
7750
16,500
21,500
31,000
44,500
63,000
84,500
125,000
13,500
24,500
46,000
98,500
130,000
185,000
265,000
375,000
500,000
755,000
40
50
55
65
70
75
80
85
90
98
170M4531
170M4532
170M4533
170M4534
170M4535
170M4536
170M4537
170M4538
170M4539
170M4540
250
315
350
400
450
500
550
630
700
800
315
350
400
450
500
550
630
700
800
900
1000
1100
1250
1400
6750
13,500
16,500
26,000
35,500
49,500
66,000
93,500
130,000
195,000
9200
13,000
19,000
27,000
37,500
52,000
82,500
115,000
170,000
250,000
340,000
460,000
575,000
795,000
40,000
81,500
99,000
155,000
210,000
295,000
390,000
555,000
770,000
1,200,000
54,500
77,500
115,000
160,000
225,000
310,000
490,000
700,000
1,050,000
1,500,000
2,050,000
2,750,000
3,400,000
4,200,000
65
75
80
85
90
95
100
110
115
125
90
95
105
107
110
115
120
125
135
145
150
155
175
185
170M5531
170M5532
170M5533
170M5534
170M5535
170M5536
170M5337
170M5538
170M5539
170M5540
170M8531
170M8532
170M8533
170M8534
170M8535
170M8536
170M8537
170M8538
170M8539
170M8540
170M8541
170M8542
170M8543
170M8544
High speed fuses
I²t (A²s)
† Watts loss at rated current.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K8564 (Size 1*), 170K8566 (Size 1),
170K8568 (Size 2), 170K8570 (Size 3)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-57
4 — High speed fuses
170M — Square Body size 1* to 3, US style
1250 Vac (IEC), 1300 Vac (UL), 50 to 1400 A
Square body US style bolted tags high speed fuses for the
protection of DC common bus, DC drives, power converters/
rectifiers and reduced rated voltage starters. Available with Type K
indicator for microswitches.
Ratings
Volts
•
•
1250 Vac (IEC)
•
1300 Vac (UL)
•
900 Vdc (UL, see catalog number table for specific fuses)
•
Amps 50-1400 A
•
IR 100 kA RMS Sym.
Operating class aR
Agency information
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized†
•
CSA†
•
CCC†
•
CE
† Consult your Bussmann series product representative for status.
Dimensions — mm
B
E
G
D
A
C1
C2
J H
Type-FU/115,-FKE/115
Size
1*
1
2
3
A
74
76
76
76
B
156
160
160
159
C1
130
127
127
128
C2
101
102
102
101
D
59
69
77
92
E
45
53
61
76
G
6
6
6
6
H
20
25
25
36
J
10
14
14
16
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6630 (Size 1*), 170K6632 (Size 1),
170K6634 (Size 2), 170K6636 (Size 3)
4-58
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 1* to 3, US style
1250 Vac (IEC), 1300 Vac (UL), 50 to 1400 A
1*
I²t (A²s)
Catalog no.
Rated
current
(amps)
50
63
80
100
125
160
200
250
315
350
Pre-arcing
135
215
420
750
1450
2600
5150
9200
18,500
27,000
160
200
250
315
350
400
450
1900
3800
7750
15,000
20,000
29,500
42,000
11,500
22,500
46,000
90,000
125,000
175,000
250,000
15,500
30,000
61,500
120,000
165,000
235,000
335,000
500
550
630
69,500
95,000
130,000
340,000
465,000
660,000
250
280
315
350
400
450
500
550
630
6500
9350
13,000
16,500
23,000
34,000
48,000
62,000
115,000
700
800
-FU/115
without indicator
170M3688††
170M3689††
170M3690††
170M3691††
170M3692††
170M3693††
170M3694††
170M3695††
170M3696††
170M3697††
-FKE/115 Type K
indicator for microswitch
170M3738††
170M3739††
170M3740††
170M3741††
170M3742††
170M3743††
170M3744††
170M3745††
170M3746††
170M3747††
45
50
60
65
70
75
80
170M4688
170M4689
170M4690
170M4691
170M4692
170M4693
170M4694
170M4738
170M4739
170M4740
170M4741
170M4742
170M4743
170M4744
N/A
N/A
N/A
85
95
100
170M4695
170M4696
170M4697
170M4745
170M4746
170M4747
38,500
55,500
77,500
97,500
140,000
205,000
285,000
370,000
575,000
51,500
74,500
105,000
135,000
180,000
270,000
380,000
495,000
730,000
65
70
75
80
85
90
95
100
120
170M5688
170M5689
170M5690
170M5691
170M5692
170M5693
170M5694
170M5695
170M5696
170M5738
170M5739
170M5740
170M5741
170M5742
170M5743
170M5744
170M5745
170M5746
160,000
245,000
795,000
1,200,000
N/A
N/A
125
130
170M5697
170M5698
170M5747
170M5748
900
1000
315
350
400
450
500
550
630
700
360,000
480,000
9500
13,500
19,000
31,000
39,000
55,000
83,500
115,000
1,750,000
2,350,000
58,000
81,500
120,000
185,000
235,000
325,000
495,000
705,000
N/A
N/A
77,500
110,000
160,000
245,000
310,000
435,000
665,000
940,000
135
145
85
90
95
100
105
110
115
120
170M5699
170M5700
170M6688
170M6689
170M6690
170M6691
170M6692
170M6693
170M6694
170M6695
170M5749
170M5750
170M6738
170M6739
170M6740
170M6741
170M6742
170M6743
170M6744
170M6745
1100 Vac (IEC)
800
900
1000
205,000
305,000
450,000
995,000
1,500,000
2,150,000
1,300,000
1,900,000
N/A
125
130
135
170M6696
170M6697
170M6698
170M6746
170M6747
170M6748
1000 Vac (UL)
1100
575,000
2,800,000
N/A
160
170M6699
170M6749
1000 Vac (IEC/UL)
1250
1400
810,000
1,250,000
3,950,000
6,000,000
N/A
N/A
170
175
170M6700
170M6701
170M6750
170M6751
1250 Vac (IEC)
1300 Vac (UL)
1250 Vac (IEC)
1300 Vac (UL)
1
1100 Vac IEC
1000 Vac IEC
1250 Vac (IEC)
1300 Vac (UL)
2
1100 Vac IEC
1000 Vac IEC
1250 Vac (IEC)
1300 Vac (UL)
3
1250 Vac (IEC)
Clearing at Clearing at
1000 Vac
1250 Vac
815
1100
1300
1750
2500
3350
4450
5950
9000
11,500
16,000
21,000
31,000
41,000
54,500
73,000
115,000
150,000
165,000
220,000
Watts
loss (W)†
15
20
25
30
35
40
45
55
60
65
High speed fuses
Fuse
size Rated voltage
† Watts loss at rated current.
†† DC voltage rated at 900 Vdc, UL Recognized, File E125085.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6630 (Size 1*), 170K6632 (Size 1),
170K6634 (Size 2), 170K6636 (Size 3)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-59
4 — High speed fuses
170M — Square Body size 00, flush-end contact
690 Vac, 25 to 400 A
Square body flush-end contact high speed fuses, for the protection
of DC common bus, DC drives, power converters/rectifiers and
reduced rated voltage starters. Catalog numbers available with visual
indicator and Type T indicator for a microswitch.
Ratings
•
Volts 690 Vac (IEC)
•
Amps 25-400 A
•
IR 200 kA RMS Sym.
Operating class
•
gR (25-80 A)
•
aR (100-400 A)
Agency information
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085
•
CSA Class 53787, File 1422-30 on size 000
•
CE
Fuse
size
00
Rated voltage
690 Vac (IEC)
Rated
current
(amps)
25
32
40
50
63
80
100
125
160
200
250
315
350
400
I²t (A²s)
Pre-arcing
19.0
28.5
50.0
95.0
170.0
310.0
620.0
1000.0
1900.0
3400.0
6250.0
10,000.0
13,500.0
18,000.0
Clearing at 660
Vac
130
195
360
640
1200
2100
4150
6950
13,000
23,000
42,000
68,500
91,500
125,000
Watts
loss
(W)†
6
7
9
10
12
15
20
25
30
35
45
55
60
70
Catalog no.
00B/60 visual indicator
170M2708
170M2709
170M2710
170M2711
170M2712
170M2713
170M2714
170M2715
170M2716
170M2717
170M2718
170M2719
170M2720
170M2721
00BTN/60 Type T indicator for
microswitch
170M2758
170M2759
170M2760
170M2761
170M2762
170M2763
170M2764
170M2765
170M2766
170M2767
170M2768
170M2769
170M2770
170M2771
† Watts loss at rated current.
Dimensions — mm
Indicator
Ø16
30
48
64 54
62
6
M8
For details on electrical characteristics, contact Application Engineering and ask for Data sheet no. 170K6312
4-60
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 1* to 3, flush-end
contact
690 Vac (IEC), 700 Vac (UL), 40 to 2000 A
Square body flush-end contact high speed fuses, for the protection
of DC common bus, DC drives, power converters/rectifiers and
reduced rated voltage starters. Catalog numbers available with visual
indicator and Type K indicator for a microswitch.
Ratings
•
Volts
•
500 to 700 Vac (see catalog number table)
•
750 Vdc (UL, see catalog number table for specific fuses)
•
Amps 40-2000 A
•
IR 200 kA RMS Sym.
Operating class aR
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085†
•
CSA Class 53787, File 1422-30†
•
CCC†
•
CE
High speed fuses
Agency information
† Consult your Bussmann series product representative for status.
Dimensions — mm
Type -B/- , -BKN/- , -G/- , -GKN/Size
1*
1
A
50
50
B
51
51
D1
59
69
E
45
53
F
M8
M8
F2 (in)
5/16-18 UNC-2B
5/16-18 UNC-2B
G
5
8
H
N17
N20
2
50
51 (400-1000 A)
65 (1100-1250 A)
77
61
M10
3/8-16 UNC-2B
10
N24
3
51
53 (500-1500 A)
65 (1600-2000 A)
92
76
M12
1/2-13 UNC-2B
10
N30
1 Valid for fuse Types -BKN/ and -GKN/.
2 Valid for fuse Types -G- and -GKN/.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6314 (Size 1*), 170K6316 (Size 1),
170K6318 (Size 2), 170K6320 (Size 3)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-61
4 — High speed fuses
170M — Square Body size 1* to 3, flush-end contact
690 Vac (IEC), 700 Vac (UL), 40 to 2000 A
I²t (A²s)
Fuse
size
1*
1
Rated
voltage
690 Vac (IEC)
700 Vac (UL)
690 Vac (IEC)
700 Vac (UL)
550 Vac (IEC)
2
690 Vac (IEC)
700 Vac (UL)
600 Vac (IEC)
700 Vac (UL)
690 Vac (IEC)
700 Vac (UL)
3
600 Vac (IEC)
500 Vac (UL)
550 Vac (IEC)
500 Vac (UL)
Rated
current
(amps)
40
50
63
80
100
125
160
200
250
315
350
400
450
500
550
630
200
250
315
350
400
450
500
550
630
700
800
900
400
450
500
550
630
700
800
900
1000
1100
1250
500
550
630
700
800
900
1000
1100
1250
1400
1500
1600
Watts
loss -B/- visual
(W)† indicator
9
170M3408
11
170M3409
14
170M3410
18
170M3411
21
170M3412
26
170M3413
30
170M3414
35
170M3415
40
170M3416
50
170M3417
55
170M3418
60
170M3419
65
170M3420
70
170M3421
75
170M3422
80
170M3423
45
170M4408
55
170M4409
58
170M4410
60
170M4411
65
170M4412
70
170M4413
72
170M4414
75
170M4415
80
170M4416
85
170M4417
95
170M4418
100
170M4419
65
170M5408
70
170M5409
75
170M5410
80
170M5411
90
170M5412
95
170M5413
105
170M5414
110
170M5415
115
170M5416
120
170M5417
130
170M5418
95
170M6408
100
170M6409
105
170M6410
110
170M6411
115
170M6412
120
170M6413
125
170M6414
130
170M6415
140
170M6416
155
170M6417
160
170M6418
160
170M6419
Catalog no.
-BKN/- Type K
indicator for
-G/- visual
microswitch
indicator
170M3458
170M3508
170M3459
170M3509
170M3460
170M3510
170M3461
170M3511
170M3462
170M3512
170M3463
170M3513
170M3464
170M3514
170M3465
170M3515
170M3466
170M3516
170M3467
170M3517
170M3468
170M3518
170M3469
170M3519
170M3470
170M3520
170M3471
170M3521
170M3472
170M3522
170M3473
170M3523
170M4458
170M4508
170M4459
170M4509
170M4460
170M4510
170M4461
170M4511
170M4462
170M4512
170M4463
170M4513
170M4464
170M4514
170M4465
170M4515
170M4466
170M4516
170M4467
170M4517
170M4468
170M4518
170M4469
170M4519
170M5458
170M5508
170M5459
170M5509
170M5460
170M5510
170M5461
170M5511
170M5462
170M5512
170M5463
170M5513
170M5464
170M5514
170M5465
170M5515
170M5466
170M5516
170M5467
170M5517
170M5468
170M5518
170M6458
170M6508
170M6459
170M6509
170M6460
170M6510
170M6461
170M6511
170M6462
170M6512
170M6463
170M6513
170M6464
170M6514
170M6465
170M6515
170M6466
170M6516
170M6467
170M6517
170M6468
170M6518
170M6469
170M6519
-GKN/- Type
K indicator for
microswitch
170M3558
170M3559
170M3560
170M3561
170M3562
170M3563
170M3564
170M3565
170M3566
170M3567
170M3568
170M3569
170M3570
170M3571
170M3572
170M3573
170M4558
170M4559
170M4560
170M4561
170M4562
170M4563
170M4564
170M4565
170M4566
170M4567
170M4568
170M4569
170M5558
170M5559
170M5560
170M5561
170M5562
170M5563
170M5564
170M5565
170M5566
170M5567
170M5568
170M6558
170M6559
170M6560
170M6561
170M6562
170M6563
170M6564
170M6565
170M6566
170M6567
170M6568
170M6569
Pre-arcing
40
77
115
185
360
550
1100
2200
4200
7000
10,000
15,000
21,000
27,000
34,000
48,500
1650
3100
6200
8500
13,500
17,000
25,000
34,000
52,000
69,500
105,000
155,000
11,000
15,500
21,500
28,000
41,000
60,500
86,000
125,000
180,000
245,000
365,000
14,000
19,500
31,000
44,500
69,500
100,000
140,000
190,000
290,000
370,000
460,000
580,000
Clearing at
660 Vac
270
515
770
1250
2450
3700
7500
15,000
28,500
46,500
68,500
105,000
140,000
180,000
230,000
325,000
11,500
21,000
42,000
59,000
91,500
120,000
170,000
230,000
350,000
465,000
725,000
850,000
74,000
105,000
145,000
190,000
275,000
405,000
575,000
840,000
1,250,000
1,600,000
2,400,000
95,000
135,000
210,000
300,000
465,000
670,000
945,000
1,300,000
1,950,000
2,450,000
3,100,000
3,900,000
1800
880,000
5,250,000
165
170M6420††
170M6470
170M6520††
170M6570
2000
1,150,000
6,350,000
175
170M6421
170M6471
170M6521
170M6571
† Watts loss at rated current.
†† DC voltage rated at 750 Vdc, UL Recognized, File E125085.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6314 (Size 1*), 170K6316 (Size 1),
170K6318 (Size 2), 170K6320 (Size 3)
4-62
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 1* to 3, flush-end
contact
1000 Vac (IEC and UL), 50 to 1400 A
Square body flush-end contact high speed fuses, for the protection
of DC common bus, DC drives, power converters/rectifiers and
reduced rated voltage starters. Catalog numbers come with Type K
indicator for use with microswitches.
Ratings
Volts
•
•
1000 Vac (IEC, 50-1250 A)
•
1000 Vac (UL, 250-1100 A)
•
900 Vac (IEC, 1400 A
•
Amps 50-1400 A
•
IR 125 kA RMS Sym.
Operating class aR
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085 (only sizes 2 and 3 up to 1100 A)
•
CE
High speed fuses
Agency information
Dimensions — mm
Type -BKN/- and -GKN/Size
1*
1
2
3
Type
BKN/75
BKN/75
BKN/75
BKN/75
BKN/90
+
+
+
+
+
GKN/75
GKN/75
GKN/75
GKN/75
GKN/90
A
72.5
73.2
73.2
73.3
80.3
B
74.0
74.0
74.4
75.4
91.4
D (max)
61
69
77
92
92
E
43
52
59
74
74
F
M8
M8
M10
M12
M12
F1 (in)
5/16-18 UNC-2B
5/16-18 UNC-2B
3/8-16 UNC-2B
1/2-13 UNC-2B
1/2-13 UNC-2B
G (min)
5
8
10
10
10
H
17.5
20.0
24.5
30.0
30.0
1 Valid for fuse Types -GKN/-.
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 170K8564 (Size 1*), 170K8566 (Size 1),
170K8568 (Size 2), 170K8570 (Size 3)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-63
4 — High speed fuses
170M — Square Body size 1* to 3, flush-end contact
1000 Vac (IEC and UL), 50 to 1400 A
Fuse
size
Rated voltage
1*
1000 Vac (IEC)
1
1000 Vac IEC)
2
1000 Vac (IEC/UL)
1000 Vac (IEC/UL)
3
1000 Vac (IEC)
900 Vac (IEC)
Rated
current
(amps)
50
63
80
100
125
160
200
250
315
350
400
160
200
250
315
350
400
450
500
550
630
250
315
350
400
450
500
550
630
700
800
315
350
400
450
500
550
630
700
800
900
1000
1100
1250
1400
I²t (A²s)
Pre-arcing
135
215
460
860
1450
2850
4950
Clearing at
rated voltage
815
1300
2750
5100
8600
17,500
29,500
9550
21,500
29,000
42,000
2200
4150
7750
16,500
21,500
31,000
44,500
63,000
84,500
125,000
6750
13,500
16,500
26,000
35,500
49,500
66,000
93,500
130,000
195,000
9200
13,000
19,000
27,000
37,500
52,000
82,500
115,000
170,000
250,000
340,000
460,000
575,000
795,000
57,000
130,000
175,000
250,000
13,500
24,500
46,000
98,500
130,000
185,000
265,000
375,000
500,000
755,000
40,000
81,500
99,000
155,000
210,000
295,000
390,000
555,000
770,000
1,200,000
54,500
77,500
115,000
160,000
225,000
310,000
490,000
700,000
1,050,000
1,500,000
2,050,000
2,750,000
3,400,000
4,200,000
Watts
loss
(W)†
20
25
30
35
40
45
50
Catalog no.
-BKN/- Type K indicator for
microswitch
170M3951
170M3952
170M3953
170M3954
170M3955
170M3956
170M3957
55
65
70
75
40
45
52
60
65
70
80
85
90
98
65
75
80
85
90
95
100
110
115
125
90
95
105
107
110
115
120
125
135
145
150
155
175
185
170M3958
170M3959
170M3960
170M3961
170M4951
170M4952
170M4953
170M4954
170M4955
170M4956
170M4957
170M4958
170M4959
170M4960
170M5952
170M5953
170M5954
170M5955
170M5956
170M5957
170M5958
170M5959
170M5960
170M5961
170M8600
170M8601
170M8602
170M8603
170M8604
170M8605
170M8606
170M8607
170M8608
170M8609
170M8610
170M8611
170M86121
170M86131
-GKN/- Type K indicator for
microswitch
170M3921
170M3922
170M3923
170M3924
170M3925
170M3926
170M3927
170M3928
170M3929
170M3930
170M3931
170M4921
170M4922
170M4923
170M4924
170M4925
170M4926
170M4927
170M4928
170M4929
170M4930
170M5922
170M5923
170M5924
170M5925
170M5926
170M5927
170M5928
170M5929
170M5930
170M5931
170M8500
170M8501
170M8502
170M8503
170M8504
170M8505
170M8506
170M8507
170M8508
170M8509
170M8510
170M8511
170M85121
170M85131
† Watts loss at rated current.
1 Overall length is 90mm, for all other fuses the overall length is 75mm.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K8564 (Size 1*), 170K8566 (Size 1),
170K8568 (Size 2), 170K8570 (Size 3)
4-64
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 1* to 3, flush-end
contact
1250 Vac (IEC), 1300 Vac (UL), 50 to 1400 A
Square body flush-end contact high speed fuses, for the protection
of DC common bus, DC drives, power converters/rectifiers and
reduced rated voltage starters. Catalog numbers come with Type K
indicator for use with microswitches.
Ratings
Volts
•
•
1250 Vac (IEC)
•
1300 Vac (UL)
•
900 and 1000 Vdc (UL, see catalog number table for specific
fuses)
•
Amps 50-1400 A
•
IR 100 kA RMS Sym.
Operating class aR
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085†
•
CSA Class 53787, File 1422-30†
•
CE
High speed fuses
Agency information
† Consult your Bussmann series product representative status.
Dimensions — mm
Type -BKN/- and -GKN/Size
1*
1
2
3
Type
BKN + GKN/75
BKN/80
BKN + GKN/75
BKN/80
BKN + GKN/75
BKN/80
BKN + GKN/90
BKN + GKN/75
BKN/80
BKN + GKN/90
A
74
80
74
80
74
80
80
74
81
81
B
75
81
75
81
75
81
91
76
83
91
D
59
59
69
69
77
77
77
92
92
92
E
45
45
53
53
61
61
61
76
76
76
F
M8
M8
M8
M8
M10
M10
M10
M12
M12
M12
F1 (in)
5/16-18 UNC-2B
3/8-16 UNC-2B
1/2-13 UNC-2B
Min G
5
5
8
8
10
10
10
10
10
10
HØ
17
17
20
20
24
24
24
30
30
30
1 Valid for fuse Types -GKN/-.
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 170K6630 (Size 1*), 170K6632 (Size 1),
170K6634 (Size 2), 170K6636 (Size 3)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-65
4 — High speed fuses
170M — Square Body size 1* to 3, flush-end contact
1250 Vac (IEC), 1300 Vac (UL), 50 to 1400 A
Fuse
size
1*
1
2
3
Rated voltage
1250 Vac (IEC)
1300 Vac (UL)
1250 Vac (IEC)
1300 Vac (UL)
1250 Vac (IEC)
1300 Vac (UL)
1250 Vac (IEC)
1300 Vac (UL)
Rated
current
(amps)
50
63
80
100
125
160
200
250
315
350
400
160
200
250
315
350
400
450
500
550
630
250
280
315
350
400
450
500
550
630
700
800
900
1000
315
350
400
450
500
550
630
700
800
900
1000
1100
1250
Prearcing
135
215
420
750
1450
2600
5150
9200
18,500
27,000
53,000
1900
3800
7750
15,000
20,000
29,500
42,000
69,500
95,000
130,000
6500
9350
13,000
16,500
23,000
34,000
48,000
62,000
115,000
160,000
245,000
360,000
480,000
9500
13,500
19,500
31,000
39,000
55,000
83,500
115,000
205,000
305,000
450,000
575,000
810,000
I²t (A²s)
Clearing
at 1000
Vac
815
1300
2500
4450
9000
16,000
31,000
54,500
115,000
165,000
265,000
11,500
22,500
46,000
90,000
125,000
175,000
250,000
340,000
465,000
660,000
38,500
55,500
77,500
97,500
140,000
205,000
285,000
370,000
575,000
795,000
1,200,000
1,750,000
2,350,000
58,000
81,500
120,000
185,000
235,000
325,000
495,000
705,000
995,000
1,500,000
2,150,000
2,800,000
3,950,000
Clearing Watts -BKN/75 Type
at 1250
loss K indicator for
Vac
(W)† micro
1100
15 170M3388††
1750
20 170M3389††
3350
25 170M3390††
5950
30 170M3391††
11,500
35 170M3392††
21,000
40 170M3393††
41,000
45 170M3394††
73,000
55 170M3395††
150,000
60 170M3396††
220,000
65 170M3397††
335,000
70
—
15,500
45 170M4388††
30,000
50 170M4389††
61,500
60 170M4390††
120,000
65 170M4391††
165,000
70 170M4392††
235,000
75 170M4393††
335,000
80 170M4394††
435,000
85 170M43954
590,000
95 170M43965
N/A
110 170M43975
51,500
65 170M5388
74,500
70 170M5389
105,000
75 170M5390
135,000
80 170M5391
180,000
85 170M5392
270,000
90 170M5393
380,000
95 170M5394
495,000
100 170M5395
730,000 120 170M53964
1,050,000 125 170M53975
1,550,000 130 170M53985
N/A 135
—
N/A 145
—
77,500
85 170M6338††
110,000
90 170M6339††
160,000
95 170M6340††
245,000
100 170M6341††
310,000
105 170M6342††
435,000
110 170M6343††
665,000
115 170M6344††
940,000 120 170M6345
1,300,000 125 170M63464
1,900,000 130 170M63475
2,750,000 135 170M63485
3,600,000 160 170M63495
N/A
170
—
1400 1,250,000 6,000,000
N/A
175
—
-BKN/80 Type
K indicator for
micro
170M3438
170M3439
170M3440
170M3441
170M3442
170M3443
170M3444
170M3445
170M3446
170M3447
170M3448
170M4438††
170M4439††
170M4440††
170M4441††
170M4442††
170M4443††
170M4444††
170M4445
170M4446
170M44474
170M5438
170M5439
170M5440
170M5441
170M5442
170M5443
170M5444
170M5445
170M5446
170M54471†††
170M54482†††
—
—
170M6538††
170M6539††
170M6540††
170M6541††
170M6542††
170M6543††
170M6544††
170M6545††
170M6546††
170M65471††
170M65481††
170M65492††
—
—
Catalog no.
-BKN/90 Type
K indicator for
micro
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
170M5494
170M5495
170M5496
170M5497
170M5498
170M54993††
170M55003††
—
—
—
—
—
—
170M6494††
170M6495††
170M6496†††
170M6497†††
170M6498†††
170M6499†††
170M65003††
170M65013††
-GKN/75 Type
K indicator for
micro
170M3488††
170M3489††
170M3490††
170M3491††
170M3492††
170M3493††
170M3494††
170M3495††
170M3496††
170M3497††
—
170M4488
170M4489
170M4490
170M4491
170M4492
170M4493
170M4494
170M44954
170M44965
170M44975
170M5588
170M5589
170M5590
170M5591
170M5592
170M5593
170M5594
170M5595
170M55964
170M55975
170M55985
—
—
170M6588
170M6589
170M6590
170M6591
170M6592
170M6593
170M6594
170M6595
170M65964
170M65975
170M65985
170M65995
—
—
-GKN/90 Type
K indicator for
micro
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
170M5644
170M5645
170M5646
170M5647
170M5648
170M56493††
170M56503††
—
—
—
—
—
—
170M6644
170M6645††
170M6646†††
170M6647†††
170M6648†††
170M6649†††
170M66504
170M66514
† Watts loss at rated current.
†† DC voltage rated at 900 Vdc, UL Recognized, File E125085.
††† DC voltage rated at 1000 Vdc, UL Recognized, File E125085.
1 Rated voltage 1100 Vac (IEC), 1000 Vac (UL).
2 Rated voltage 1000 Vac (IEC and UL).
3 Rated voltage 1100 Vac (IEC and UL).
4 Rated voltage (IEC) 1100 Vac.
5 Rated voltage (IEC) 1000 Vac.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6630 (Size 1*), 170K6632 (Size 1),
170K6634 (Size 2), 170K6636 (Size 3)
4-66
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 4, flush-end contact
690 Vac (IEC), 700 Vac (UL), 1000 to 4000 A
Square body, flush-end contact, high speed fuses, for the protection
of power rectifiers. Catalog numbers come with visual indicator or
Type K indicator for use with microswitches.
Ratings
Volts
•
•
690 Vac (IEC)/700 Vac (UL) 1000-3500 A
•
600 Vac (IEC and UL, 4000 A)
•
Amps 1000-4000 A
•
IR 200 kA RMS Sym.
Operating class aR
Agency information
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085
•
CE
Fuse
size
High speed fuses
•
Rated voltage
690 Vac (IEC)
4
700 Vac (UL)
600 Vac (IEC/UL)
Rated
current
(amps)
1000
1250
1400
1600
2000
2500
3000
3500
4000
I²t (A²s)
Pre-arcing
76,000
145,000
205,000
305,000
600,000
1,200,000
2,000,000
3,250,000
4,700,000
Clearing at Watts loss -B/65 visual
660 Vac
(W)† indicator
505,000
175
170M7058
965,000
195
170M7059
1,400,000
205
170M7060
2,050,000
220
170M7061
3,950,000
245
170M7062
7,800,000
275
170M7063
13,500,000
305
170M7064
22,000,000
325
170M7065
28,000,0001
355
170M7066
Catalog no.
-BKN/65 Type
K indicator
170M7078
170M7079
170M7080
170M7081
170M7082
170M7083
170M7084
170M7085
170M7086
-G/65 visual
indicator
170M7098
170M7099
170M7100
170M7101
170M7102
170M7103
170M7104
170M7105
170M7106
-GKN/65 Type
K indicator
170M7118
170M7119
170M7120
170M7121
170M7122
170M7123
170M7124
170M7125
170M7126
† Watts loss at rated current.
1 Clearing at 600 Vac.
For details on electrical characteristics, contact Application Engineering and ask for Data sheet no. 170K6328
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-67
4 — High speed fuses
170M — Square Body size 4, flush-end contact
690 Vac (IEC), 700 Vac (UL), 1000 to 4000 A
Dimensions — mm
Type -BKN/65, -GKN/65
Type
-GKN/65
PCD
Ø 38.1
Thread
1/2-13 UNC
-BKN/65
Ø 33.0
M-10
PCDØ
38.1
33.0
Thread
1/2-13 UNC
M-10
Type -B/65, -G/65
Type
-G/65
-B/65
For details on electrical characteristics, contact Application Engineering and ask for Data sheet no.170K6328
4-68
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 4, flush-end contact
1000 Vac (IEC), 1000 to 3000 A
Square body, flush-end contact, high speed fuses, for the protection
of power rectifiers. Catalog numbers come with visual indicator or
Type K indicator for use with microswitches.
Ratings
•
Volts 1000 Vac (IEC)
•
Amps 1000-3000 A
•
IR 200 kA RMS Sym.
Operating class aR
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085
•
CE
Fuse
size
4
Rated
voltage
1000 Vac
Rated current
(amps)
1000
1100
1500
1700
1800
2000
I²t (A²s)
Pre-arcing
180,000
250,000
600,000
850,000
1,000,000
1,450,000
Clearing at 1000 Vac
1,100,000
1,500,000
3,600,000
5,000,000
5,950,000
8,600,000
Watts
loss
(W)†
195
200
250
260
265
270
2200
2500
2700
3000
2,000,000
3,000,000
3,700,000
4,700,000
12,000,000
18,000,000
22,000,000
28,000,000
280
295
310
380
Catalog no.
-BKN/95 Type K indicator
—
—
170M7636
170M7639
170M7661
170M7963
-SBKN/90 Type K indicator
170M7542
170M7031
170M7548
170M7034
170M7053
170M7544
170M7090
170M7640
170M7658
170M7962
170M7035
170M7036
170M7037
170M7156
† Watts loss at rated current.
Dimensions — mm
Type 4BKN/95
Type 4SBKN/90
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K8520, 170K8520-R
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-69
High speed fuses
Agency information
4 — High speed fuses
170M — Square Body size 4, flush-end contact
1250 Vac (IEC), 800 to 2500 A
Square body, flush-end contact, high speed fuses, for the protection
of power rectifiers. Catalog numbers come with visual indicator or
Type K indicator for use with microswitches.
Ratings
•
Volts
•
1250 Vac (IEC)
•
1200 Vdc (UL)
•
Amps 800-2500 A
•
IR
•
200 kA RMS Sym.
•
85 kA DC (L/R 2 ms)
Agency information
Operating class aR
Fuse
size Rated voltage
4
1250 Vac (IEC)
1200 Vdc (UL)
Rated
current
(amps)
800
1000
1200
1400
1500
1700
1800
2000
2200
2400
2500
I²t (A²s)
Pre-arcing Clearing at 1250 Vac
145,000
905,000
275,000
1,750,000
495,000
3,100,000
800,000
5,000,000
1,000,000
6,200,000
1,400,000
8,700,000
1,700,000
11,000,000
2,300,000
14,500,000
3,100,000
19,500,000
4,000,000
25,000,000
4,500,000
28,000,000
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085
•
cURus JFHR2, E125085
•
CE
Watts
loss
(W)†
195
220
240
250
260
275
280
305
315
330
340
Catalog no.
-BKN/105 Type K indicator
170M7802
170M7803
170M7804
170M7217
170M7597
170M7676
170M7532
170M7633
170M7592
170M7107
170M7595
-SBKN/105 Type K indicator
—
—
—
170M7512
170M7510
170M7511
170M7976
170M7513
170M7546
170M7516
170M7978
† Watts loss at rated current.
Dimensions — mm
Type 4BKN/105
Type 4SBKN/105
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6640 (1400-2400 A),
170K6642 (800-1200, 2500 A)
4-70
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 23, flush-end contact
660 Vac (IEC), 1000 to 4000 A
Square body, flush-end contact, high speed fuses, for the protection
of power rectifiers. Catalog numbers available with Type K indicator
for use with microswitches.
Ratings
•
Volts
•
660 Vac (IEC, 1000-3000 A)
•
600 Vac (IEC, 3500 A)
•
550 Vac (IEC, 4000 A)
•
Amps 1000-4000 A
•
IR 100 kA RMS Sym.
Operating class aR
Agency information
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085
•
CE
High speed fuses
•
I²t (A²s)
Fuse
size Rated voltage
660 Vac (IEC)
23
Rated
current
(amps)
Pre-arcing
Catalog no.
Watts
Clearing at loss
660 Vac
(W)† -BU/55
-BKE/55
Type K
indicator
-BKN/55
Type K
indicator
-GU/55
-GKE/55
Type K
indicator
-GKN/55
Type K
indicator
1000
79,000
530,000
170
170M6858
170M6898
170M6878
170M6918
170M6958
1100
95,000
635,000
185
170M6859
170M6899
170M6879
170M6919
170M6959
170M6938
170M6939
1250
155,000
1,050,000
190
170M6860
170M6900
170M6880
170M6920
170M6960
170M6940
1400
200,000
1,350,000
210
170M6861
170M6901
170M6881
170M6921
170M6961
170M6941
1500
240,000
1,650,000
215
170M6862
170M6902
170M6882
170M6922
170M6962
170M6942
1600
315,000
2,150,000
220
170M6863
170M6903
170M6883
170M6923
170M6963
170M6943
1800
450,000
3,050,000
230
170M6864
170M6904
170M6884
170M6924
170M6964
170M6944
2000
625,000
4,200,000
240
170M6865
170M6905
170M6885
170M6925
170M6965
170M6945
2200
805,000
5,400,000
255
170M6866
170M6906
170M6886
170M6926
170M6966
170M6946
2500
1,250,000
8,350,000
265
170M6867
170M6907
170M6887
170M6927
170M6967
170M6947
3000
2,250,000
15,500,000
285
170M6868
170M6908
170M6888
170M6928
170M6968
170M6948
600 Vac (IEC)
3500
3,450,000 21,000,0001
315
170M6869
170M6909
170M6889
170M6929
170M6969
170M6949
550 Vac (IEC)
4000
5,000,000
340
170M6870
170M6910
170M6890
170M6930
170M6970
170M6950
27,500,0002
† Watts loss at rated current.
1 Clearing at 600 Vac.
2 Clearing at 550 Vac.
When using these fuses, please consult our application engineers.
For details on electrical characteristics, contact Application Engineering and ask for Data sheet no. 170K6326
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-71
4 — High speed fuses
170M — Square Body size 23, flush-end contact
660 Vac (IEC), 1000 to 4000 A
Dimensions — mm
Type -BU/55, -BKE/55, -BKN/55
Type -GU/55, -GKE/55, -GKN/55
When using these fuses, please consult our application engineers.
For details on electrical characteristics, contact Application Engineering and ask for Data sheet no.170K6326
4-72
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — Square Body size 23, flush-end contact
1250 Vac (IEC), 630 to 2800 A
Square body, flush-end contact, high speed fuses, for the protection
of power rectifiers. Catalog numbers available with visual indicator or
Type K indicator for use with microswitches.
Ratings
•
Volts
•
1250 Vac (IEC 630 to 2200 A)
•
1100 Vac (IEC 2500 and 2800 A)
•
900 Vdc (UL, see catalog number table for specific fuses)
•
Amps 630-2800 A
•
IR 125 kA RMS Sym.
Operating class aR
Agency information
Designed and tested to IEC 60269 Part 4
•
UL Recognized
•
CE
High speed fuses
•
I²t (A²s)
Fuse
size Rated voltage
1250 Vac (IEC)
23
1100 Vac (IEC)
Rated
current
(amps)
630
Watts
Clearing at
loss
Pre-arcing
1250 Vac
(W)†
38,000
310,000 170
-BU/75
visual
indicator
170M6775
-BKE/75
Type K
indicator
170M6795
Catalog no.
-BU/80
-BKN/75
visual
Type K
indicator
indicator
170M6785
—
-BKE/80
Type K
indicator
—
-BKN/80
Type K
indicator
—
700
54,000
440,000
180
170M6776
170M6796
170M6786
—
—
—
800
78,000
640,000
190
170M6777
170M6797
170M6787
—
—
—
900
120,000
980,000
200
170M6805
170M6807
170M6806
—
—
—
1000
155,000
1,250,000
210
170M6778
170M6798
170M6788
—
—
—
1100
220,000
1,750,000
220
170M6779
170M6799
170M6789
—
—
—
1250
330,000
2,700,000
230
170M6780
170M6800
170M6790
—
—
—
1400
460,000
3,800,000
240
170M6781
170M6801
170M6791
—
—
—
1600
820,000
5,200,000
250
170M6782
170M6802
170M6792
—
—
—
—
—
—
1800
1,200,000
7,600,000
260
170M6783††
170M6803††
170M6793††
2000
1,800,000
11,000,000
270
—
—
—
170M6784 170M6804 170M6794
170M6815 170M6833 170M6827
2200
2,300,000
14,500,000
280
—
—
—
2500
3,200,000
16,000,0001
290
—
—
—
170M6816 170M6834 170M6828
2800
5,000,000 24,000,0001
300
—
—
—
170M6817 170M6835 170M6829
† Watts loss at rated current.
†† DC voltage rated at 900 Vdc, UL Recognized, File E125085.
1 Clearing at 1000 V.
When using these fuses, please consult our application engineers.
Dimensions — mm
For details on electrical characteristics, contact Application Engineering and ask for Data sheet no.170K6638
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-73
4 — High speed fuses
170M — Square Body size 24, flush-end contact
690 Vac (IEC), 2000 to 7500 A
Square body, flush-end contact, high speed fuses, for the protection
of power rectifiers. Catalog numbers available with Type K indicator
for use with microswitches.
Ratings
Volts
•
•
690 Vac (IEC 2000 to 7000 A)
•
500 Vac (IEC 7500 A)
•
Amps 2000-7500 A
•
IR 200 kA RMS Sym.
Operating class aR
Agency information
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085
•
CE
Fuse
size Rated voltage
24
690 Vac (IEC)
500 Vac (IEC)
Rated
current
(amps)
2000
2500
3000
3500
4000
4500
5000
5500
6000
6500
7000
7500
I²t (A²s)
Clearing at Watts loss -BU/60 without
Pre-arcing
660 Vac
(W)†
indicator
340,000
2,300,000
340
170M7138
650,000
4,350,000
390
170M7139
1,100,000
7,300,000
430
170M7140
1,800,000 12,000,000
460
170M7141
2,700,000 18,000,000
490
170M7142
3,800,000 25,500,000
520
170M7143
5,450,000 36,500,000
540
170M7144
7,400,000 49,500,000
560
170M7145
9,600,000 64,000,000
580
170M7146
12,500,000 83,000,000
600
170M7147
15,000,000 100,000,000
630
170M7148
18,500,000 93,000,0001
660
170M7149
Catalog no.
-BKN/60 Type -GU/60 without
K indicator
indicator
170M7158
170M7198
170M7159
170M7199
170M7160
170M7200
170M7161
170M7201
170M7162
170M7202
170M7163
170M7203
170M7164
170M7204
170M7165
170M7205
170M7166
170M7206
170M7167
170M7207
170M7168
170M7208
170M7169
170M7209
† Watts loss at rated current.
1 Clearing at 500 Vac.
When using these fuses, please consult our application engineers.
Dimensions — mm
Size
24
Type
BKN
GKN
A
2x3 M12
2x3 1/2-13 UNC-2B
For details on electrical characteristics, contact Application Engineering and ask for Data sheet no.170K6332
4-74
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
-GKN/60 Type
K indicator
170M7218
170M7219
170M7220
170M7221
170M7222
170M7223
170M7224
170M7225
170M7226
170M7227
170M7228
170M7229
High speed fuses — 4
170M — Square Body size 24, flush-end contact
1000 Vac (IEC), 2000 to 5000 A
Square body, flush-end contact, high speed fuses, for the protection
of power rectifiers. Catalog numbers come with Type K indicator for
use with microswitches.
Ratings
•
Volts 1000 Vac (IEC)
•
Amps 2000-5000 A
•
IR 166 kA RMS Sym.
Operating class aR
•
Designed and tested to IEC 60269 Part 4
•
UL Recognized, JFHR2, E125085
•
CE
I²t (A²s)
Fuse
size
Rated voltage
24
1000 Vac (IEC)
Rated current (amps)
2000
3000
3200
3500
4000
4200
4500
5000
Pre-arcing
900,000
2,950,000
3,300,000
4,500,000
6,800,000
8,000,000
10,000,000
14,000,000
Clearing at 1000 Vac
5,350,000
17,500,000
20,000,000
27,000,000
40,000,000
47,500,000
59,000,000
82,500,000
Watts loss (W)†
345
430
440
450
475
485
495
540
Catalog no.
-BKN/85 Type K indicator
170M7608
170M7680
170M7567
170M7568
170M7569
170M7498
170M7488
170M7622
† Watts loss at rated current.
When using these fuses, please consult our application engineers.
Dimensions — mm
The normal position of the indicator is as shown position "N", position "E" on request only.
For details on electrical characteristics, contact Application Engineering and ask for Data sheet no.170K8514
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-75
High speed fuses
Agency information
4 — High speed fuses
Square Body fuse accessories
Fixed center fuse blocks for DIN 43653 fuses
Fuse blocks for use with DIN 43653 square body fuses with center
distances of 80 and 110mm. Available for sizes 000, 00, 1*, 1, 2 and
3.
Sizes 000 to 00
Catalog no.
170H1007
170H1013
Max rated
voltage
1000
690
Max fuse
amp rating
400
200
Center
distance
(mm)
80
80
Fuse sizes
00, 000
0000, 000
Dimensions — mm
170H1007
170H1013
4-76
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
Square Body fuse accessories
Fixed center fuse blocks for DIN 43653 fuses
Sizes 1* to 3
Catalog no.
170H3003
170H3004†
Max rated
voltage
1000
1000
170H3005
170H3006†
Max fuse amp
rating
630
1250
Center distance
(mm)
80
80
1400
630
110
1400
1250
110
† Fuses with ratings higher than 1250 A can be used with 170H3004 or 170H3006
if the maximum load current is derated according to this table.
Fuse amp rating
1400
1500
1600
1800
2000
Max. amp load in fuse block
1325
1400
1500
1650
1800
High speed fuses
Dimensions — mm
170H3003
170H3005
170H3004
170H3006
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-77
4 — High speed fuses
Square Body fuse accessories
Indicators
High speed square body fuses are available with the following
indicators.
Visual indicator
The indicator situated in one end plate is clearly visible as soon as
the fuse has operated. The minimum rated voltage for operating the
indicator is 20 V.
Type T indicator
The indicator is situated on one cover plate with a cover plate tag
to accommodate an auxiliary switch. The minimum rated voltage for
operating the indicator is 20 V. A special low rated voltage indicator
(1.5 V) is available on request.
Type K indicator
The indicator is situated on the fuse body. It is covered by an adapter
for snap-on mounting of a microswitch. The rated operating voltage
of the indicator is 1.5 V. As a matter of safety, the factory mounted
adapter must not be removed from the fuse.
Microswitches
High speed square body fuses with either Type T or K indicators
can be equipped with a microswitch for remote signaling of fuse
operation. All microswitches have one normally open (NO) and one
normally closed (NC) contact.
Ratings
•
Volts 250 Vac
•
Amps 5 A
Catalog numbers
DIN 43653
Fuse
size
000
00
1*
1
2
3
DIN 43620
French style
Flush-end
US style
Type T
Type K
aR
gR and dual
indication
Type T
Type K
Type T
Type K
Type K
170H0236
—
170H0236
170H0236
—
—
—
—
—
170H0238
—
170H0238
170H0238
—
—
—
—
—
Quick
connect
terminal
size (mm)
170H0235
170H0069
170H0235
—
170H0236
170H0069
—
170H0069
170H0069
170H0237
—
170H0237
—
170H0238
—
—
—
—
6.3x0.8
2.8x0.5
6.3x0.8
2.8x0.5
6.3x0.8
2.8x0.5
1
170H0235
—
170H0236
170H0236
—
—
170H0235
—
—
170H0237
—
170H0238
170H0238
—
—
170H0237
—
—
170H0235
170H0069
170H0235
170H0236
170H0236
170H0069
—
170H0069
170H0069
6.3x0.8
170H0237
—
170H02371
170H0238
170H0238
—
—
—
—
170H0235
170H0069
170H0235
170H0236
170H0236
170H0069
—
170H0069
170H0069
170H0237
—
170H0237
170H0238
170H0238
—
—
—
—
170H0235
170H0069
170H0236
170H0236
170H0236
170H0069
—
170H0069
170H0069
2.8x0.5
6.3x0.8
2.8x0.5
6.3x0.8
2.8x0.5
170H0237
—
170H0238
170H0238
170H0238
—
—
—
—
4
—
—
—
—
—
—
—
170H0069
—
23
—
—
—
—
—
—
—
170H0069
—
24
—
—
—
—
—
—
—
170H0069
—
6.3x0.8
1 DIN2* (55x55), if DIN2 then use microswitch 170H0236, 170H0238.
For special microswitches, double microswitches, microswitches with DC ratings, lower/higher signal levels and for insulation voltages please contact Eaton's
Bussmann Division: bulehighspeedtechnical@eaton.com.
4-78
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — IGBT size 000 and 230
750 Vdc (IEC), 800 Vdc (UL), 25 to 630 A
Bolted tag high speed fuses for the protection of IGBT modules,
optimized for use in IGBT inverter circuits with DC fuse voltage
ratings up to 750 Vdc. Low inductance ≤ 15nH.
Ratings
Volts
•
•
750 Vdc tested at 863 Vdc according to IEC 60269-4
•
800 Vdc tested at 800 Vdc according to UL 248-1
•
Amps 25-630 A
•
IR 50 kA DC (1ms tc) at 800 Vdc
Operating class aR
Agency information
I²t (A²s)
Fuse size Rated voltage
000
750 Vdc (IEC)
800 Vdc (UL)
230
Rated current (amps)
25
32
40
50
63
80
100
125
160
200
250
315
350
100
125
160
200
250
315
350
400
450
500
550
630
Catalog no.
Pre-arcing Clearing at 690 Vac Watts loss (W)†
25
135
12
45
240
13
75
395
14
135
695
16
260
1350
17
460
2350
20
795
4000
25
1300
6800
29
2550
13500
34
4350
22000
40
7400
37500
48
12,500
65000
60
17,000
88000
65
380
1950
35
645
3300
42
1350
7000
47
2550
13500
54
4950
25000
62
9350
47500
72
12,000
61000
78
18,500
94500
80
27,000
140000
85
37,500
190000
90
48,500
245000
95
69,500
355000
105
-FU/70
170M1750
170M1751
170M1752
170M1753
170M1754
170M1755
170M1756
170M1757
170M1758
170M1759
170M1760
170M1761
170M1762
170M1770
170M1771
170M1772
170M1773
170M1774
170M1775
170M1776
170M1777
170M1778
170M1779
170M1780
170M1781
-FN/70
170M1730
170M1731
170M1732
170M1733
170M1734
170M1735
170M1736
170M1737
170M1738
170M1739
170M1740
170M1741
170M1742
170M1785
170M1786
170M1787
170M1788
170M1789
170M1790
170M1791
170M1792
170M1793
170M1794
170M1795
170M1796
† Watts loss at rated current.
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6422 (Size 000), 170K6426 (Size 230)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-79
High speed fuses
UL DC Recognized, 800 Vdc L/R 1 ms max
•
4 — High speed fuses
170M — IGBT size 000 and 230
750 Vdc (IEC), 800 Vdc (UL), 25 to 630 A
Dimensions — mm
Size 000
Size 230
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 170K6422 (Size 000), 170K6426 (Size 230)
4-80
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
High speed fuses — 4
170M — IGBT size 000 and 230
1000 Vdc (IEC and UL), 25 to 500 A
Bolted tag high speed fuses for the protection of IGBT modules,
optimized for use in IGBT inverter circuits with DC fuse voltage
ratings up to 1000 Vdc. Low inductance ≤ 20nH.
Ratings
Volts
•
•
1000 Vdc tested at 1150 Vdc according to IEC 60269-4
•
1000 Vdc tested at 1000 Vdc according to UL 248-1
•
Amps 25-500 A
•
IR 50 kA DC (1ms tc)
Operating class aR
Agency information
Fuse
size
I²t (A²s)
Rated voltage
000
1000 Vdc (IEC/UL)
230
Rated current (amps)
25
32
40
50
63
80
100
125
160
200
225
250
Pre-arcing
19
34
61
135
245
505
1050
1900
4050
8500
12,000
16,000
100
125
160
200
250
315
350
400
450
500
600
1200
2550
4650
9300
18,500
24,500
37,500
52,000
69,500
Catalog no.
Clearing at 1000 Vac Watts loss (W)†
95
14
170
17
300
20
675
21
1200
22
2500
27
5150
32
9500
34
20,000
37
42,000
43
59,000
45
79,500
48
3050
6050
13,000
23,000
45,500
91,500
125,000
185,000
260,000
340,000
38
42
48
55
62
68
75
80
85
90
-FU/90
170M1802
170M1803
170M1804
170M1805
170M1806
170M1807
170M1808
170M1809
170M1810
170M1811
170M1812
170M1813
-FN/90
170M1842
170M1843
170M1844
170M1845
170M1846
170M1847
170M1848
170M1849
170M1850
170M1851
170M1852
170M1853
170M1824
170M1825
170M1826
170M1827
170M1828
170M1829
170M1830
170M1831
170M1832
170M1833
170M1860
170M1861
170M1862
170M1863
170M1864
170M1865
170M1866
170M1867
170M1868
170M1869
† Watts loss at rated current.
For details on electrical characteristics, contact Application Engineering and ask for data sheets: 170K6680 (Size 000), 170K6682 (Size 230)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
4-81
High speed fuses
UL DC Recognized, 1000 Vdc L/R 1ms max
•
4 — High speed fuses
170M — size 000 and 230
1000 Vdc (IEC and UL), 25 to 500 A
Dimensions — mm
Size 000
Size 230
For details on electrical characteristics, contact Application Engineering and ask for data sheets:170K6680 (Size 000), 170K6682 (Size 230)
4-82
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
IEC and British Standard fuses — 5
Contents
Section
page
Description
Fuses
Bussmann series IEC
cylindrical fuses
CSA Type P and D fuses (CDN, CDS and PON)
2
HRC Form II Class C fuses (CGL)
3
HRCI industrial ceramic body fuses
HRCI-CA (CIF21)
4
HRCI-CB (CIF06)
HRCI-Misc. Type K (CIH, CIK and CIL)
5
HRC Form II current-limiting fuses (H07C, K07C, L14C,
M14C, L09C, M09C, P09C, P11C, R11C)
6
BS88 Part 1 fuses
SSD, NSD, ESD
7
STD, NITD, AAO, BAO, OSD, CEO, DEO
BS88
AC, AD, BC, BD, CD, DD, ED, EFS
8
EF, FF, FG, GF, GG, GH
DIN Type D Diazed (D16, D27, D33, D125)
9
DIN Type N Neozed (NZ01, NZ02)
10-11
JKS-700 fast-acting, current limiting UL Recognized and CSA
Component Acceptance 700 Vac fuses up to 60 amps
11
NH fuse blocks and accessories (SD, TD)
12
Fuses continued
IEC 60269 industrial fuses with and without indicator/striker
Class gG ferrule (C10G, C14G, C22G)
13
Class aM ferrule (C10M, C14M, C22M)
14
HRC fuse holders
CAMaster
Complete portfolio of
8-22 mm diameter
Class aM and Class gG
cylindrical fuses for industrial
applications
SAFEloc
15
Red Spot
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
5-1
IEC and British
Standard fuses
NH HRC fuses (NHG)
5 — IEC and British Standard fuses
CDN, CDS and PON CSA Type P and D fuses
Dimensions — in (mm)
A
CSA time-delay Type D and P fuses.
B
Ratings
•
Volts
•
250 Vac (CDN and PON)
•
600 Vac (CDS)
Up to 60 A
Amps 10-600 A
•
IR 10 kA minimum
CSA Certified, Class 1421-01, File 53787, CE
Features
Economical fuse in a variety of ratings for applications not
requiring time-delay
Typical applications
•
Lighting, heating and other circuits not subject to temporary
surges and where available short-circuit current are relatively low
Catalog no.*
Catalog symbol
Volts
Available amp ratings
Time-Delay CSA Type "D" fuses
CDN**
CDS†
250 Vac
10, 12, 15, 20, 25, 30, 35, 40, 45, 50, 60,
70, 80, 90, 100, 110, 125, 150, 175, 200,
225, 250, 300, 350, 400, 450, 500, 600
600 Vac
10, 12, 15, 20, 25, 30, 35, 40, 45, 50, 60,
70, 80, 90, 100, 110, 125, 150,175, 200,
225, 250, 300, 350, 400, 450, 500, 600
One-time CSA Type "P" fuses
PON
250 Vac
E
70 to 600 A
Agency information
•
B
F
•
•
A
D
C
15, 20, 25, 30, 35, 40, 45, 50, 60
* To order, specify catalog symbol and amp rating, e.g., CDN30, CDS110 or
PON40.
** Below 10 amps, use FRN-R.
† Below 10 amps, use FRS-R.
Amps
A
CDN/PON 250 Vac
Up to 30
2.0 (51)
35-60
3.0 (76)
70-100
5.9 (149)
110-200
7.3 (185)
225-400
8.6 (219)
450-600 10.4 (264)
CDS 600 Vac
Up to 30 5.0 (127)
35-60
5.5 (140)
70-100
7.9 (200)
110-200
9.6 (245)
225-400 11.6 (295)
450-600 13.4 (340)
B
C
D
E
F
0.6 (14)
—
—
0.8 (21)
—
—
—
1.0 (25)
—
—
1.4 (35) 4.1 (105)
—
1.9 (48) 4.6 (118)
—
2.3 (57) 5.2 (132)
—
—
0.1 (3)
0.2 (5)
0.3 (6)
0.3 (6)
—
—
0.8 (19)
1.1 (29)
1.6 (41)
2 (51)
0.8 (21)
—
—
1.1 (27)
—
—
—
1.0 (25)
—
—
1.4 (35) 6.1 (116)
—
1.9 (48) 7.1 (118)
—
2.3 (57) 8.2 (208)
—
—
0.1 (3)
0.2 (5)
0.3 (6)
0.3 (6)
—
—
0.8 (19)
1.1 (29)
1.6 (41)
2 (51)
Recommended fuse blocks
Catalog no.*
Volts
Fuse amps
250
600
Up to 30
HM25030-(poles)
HM60030-(poles)
35-60
HM25060-(poles)
HM60060-(poles)
70-100
HM25100-(poles)
HM60100-(poles)
110-200
HM25200-(poles)
HM60200-(poles)
225-400
HM25400-(poles)
HM60400-(poles)
450-600
HM25600-(poles)
HM60600-(poles)
* To order, specify 1, 2 or 3 poles, e.g., HM25030-2_. See data sheets 10289
(30-60 A) and 3192 (70-600 A) for available terminals.
Data sheet no. 4126
5-2
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
IEC and British Standard fuses — 5
CGL HRC Form II Class C fuses
Dimensions — in (mm)
Current-limiting HRCII-C fuses designed to withstand inrush currents
on typical motor start-ups while offering high current limitation in the
short-circuit region. See drawings for dimensions.
0.22
0.81
0.22
(5.56)
(20.64)
(5.56)
0.06
2.0
2.80
•
0.94
(8.73)
(71.04)
Ratings
(1.59)
0.34
(50.8)
(23.81)
3.31
(84.14)
CGL 1-30
Volts
0.22
•
600 Vac
•
250 Vdc (1-30 A)
•
Amps 1-600 A
•
IR
0.81
0.22
(5.56)
(20.64)
(5.56)
0.06
2.0
(1.59)
0.50
(50.8)
2.80
1.06
(12.7)
(71.04)
(26.92)
3.5
(88.9)
•
200 kA
•
40 kA DC
CGL 35-60
0.343
1.34
0.343
(8.71)
(34.04)
(8.71)
Agency information
2.39
CSA Certified, Class 1422,File 53787, CE
(60.72)
3.64
0.09
(2.29)
0.75
1.375
(19.05)
(34.93)
(92.47)
4.31
Catalog no. (amps)
(109.54)
CGL-1
CGL-25
CGL-80
CGL-225
CGL-2
CGL-30
CGL-90
CGL-250
CGL-3
CGL-35
CGL-100
CGL-300
CGL-4
CGL-40
CGL-110
CGL-350
CGL-6
CGL-45
CGL-125
CGL-400
CGL-10
CGL-50
CGL-150
CGL-450
CGL-15
CGL-60
CGL-175
CGL-500
CGL-20
CGL-70
CGL-200
CGL-600
0.343
0.343
(8.71)
(8.71)
3.00
0.125
0.75
(76.2)
(19.05)
4.30
(109.22)
Close sizing to loads allows using smaller and less costly switches
•
Provides a higher degree of short-circuit protection
•
Helps protect motors against burnout from overloads
(38.1)
5.31
(134.87)
0.19
(4.76)
1.0
(25.4)
(9.53)
•
(3.18)
1.50
CGL 110-200
0.38
Features
1.0
3.0
(25.4)
2.38
(76.2)
(60.33)
5.25
(133.35)
8.19
(207.96)
Typical applications
•
CGL 70-100
IEC and British
Standard fuses
•
CGL 225-400
For use in circuits subject to surge currents such as those caused
by motors, transformers and other inductive loads
1.0
0.41
(25.4)
(10.32)
Available Red Spot fuse holders
Fuse amps
Catalog symbol*
Up to 32
RS32_
35-60
RS63_
70-100
RS100_
110-200
RS200_
225-400
RS400_
1.0
(25.4)
0.60
3.0
(76.2)
5.25
(133.35)
8.19
(15.24)
0.375
(9.53)
3.00
(76.2)
(207.96)
CGL 450-600
* See Red Spot data sheet no. 10083 for terminal options.
Data sheet no. 4125
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
5-3
5 — IEC and British Standard fuses
CIF21 HRCI-CA industrial ceramic body fuses
CIF06 HRCI-CB industrial ceramic body fuses
The HRCI-CA bolt-on, ceramic body fuse provides both overload
and short-circuit protection to HRCI requirements. Offset blades for
bolt-on mounting CIF21 fuse fits the Bussmann series Red Spot
fuse holder (data sheet 10083) and CAMaster fuse holder (data
sheet number 4132).
A miniature offset clip-in blade, ceramic body industrial fuse that
provides both short-circuit and overload protection and the CIF06 fits
the 30 A SAFEloc fuse holder (data sheet number 4133).
Ratings
•
•
Ratings
Volts
•
600 Vac
Volts
•
600 Vac
•
250 Vdc
250 Vdc
•
Amps 1-30 A
•
Amps 1-30 A
•
IR 200 kA RMS Sym.
•
IR 200 kA RMS Sym.
Agency information
•
Agency information
•
•
CSA, Class 1422-02, File 53787, CE
Catalog no.
Amps
CSA, Class 1422-02, File 53787 (3-30 A only), CE
Catalog no.
Catalog no.
Amps
1CIF21
1
15CIF21
15
3CIF21
3
20CIF21
20
6CIF21
6
25CIF21
25
10CIF21
10
30CIF21
30
Features
Amps
1CIF06
1
15CIF06
15
3
20CIF06
20
6CIF06
6
25CIF06
25
10CIF06
10
30CIF06
30
Features
•
Close sizing to loads allows using smaller and less costly switches
Provides a higher degree of short-circuit protection
Helps protect motors against burnout from overloads
•
Close sizing to loads allows using smaller and less costly switches
•
Provides a higher degree of short-circuit protection
•
•
Helps protect motors against burnout from overloads
Typical applications
•
•
For use in circuits subject to surge currents such as those caused
by motors, transformers and other inductive loads
Recommended fuse holders
Amps
Description
Catalog no.*
Up to 20
Red Spot
RS20_(terminal option)
Up to 30
CAMaster
CM20CF
Amps
3CIF06
•
Typical applications
Catalog no.
For use in circuits subject to surge currents such as those caused
by motors, transformers and other inductive loads
Recommended fuse holders
Amps
Description
Catalog no.*
Up to 30
SAFEloc
C30(terminal option)
* See data sheet no. 4133 for SAFEloc details.
Dimensions — in (mm)
* See data sheet no. 10083 (Red Spot) and 4132 (CAMaster) for details.
2.38 (60)
1.44 (36)
Dimensions — in (mm)
0.54 (14)
0.03 (4)
0.44 (11)
0.19 (5)
1.75 (45)
Data sheet no. 4127
5-4
0.5 (13)
0.54 (14)
2.15 (55)
1.44 (36)
0.14 (4)
0.03 (1)
Data sheet no. 4128
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
IEC and British Standard fuses — 5
CIH, CIK and CIL HRCI — Misc. Type K fuses
Misc. Type K HRCI bolt-on, ceramic body fuses provide both overload
and short-circuit protection, featuring offset blades for bolt down
mounting.
Ratings
•
Volts 600 V
•
Amps 1-100 A
•
IR 200 kA@600 V
Agency information
•
CSA, Class 1422-02, File 53787, CE
Catalog no. (amp)CIH, CIK, CIL
1CIH07
15CIH07
35CIK07
80CIL14
3CIH07
20CIH07
40CIK07
90CIL14
6CIH07
25CIH07
50CIK07
100CIL14
10CIH07
30CIH07
60CIK07
Dimensions — in (mm)
K
F
A
D
G
J
E
B
H
IEC and British
Standard fuses
L
C
G
The CIL14 has a rejection hole, not a slot as shown above.
Amps
Up to
30
A
2.25
(57)
2.28
35-60
(58)
2.75
80-100
(70)
B
0.94
(24)
1.06
(27)
1.44
(37)
C
3.38
(86)
3.56
(91)
4.38
(111)
D
E
F
G
H
J
K
L
0.38 0.04 2.88 0.21 0.31
1
0.10 2.38
(10) (1) (73) (5)
(8) (25) (3) (60)
0.5 0.05 2.88 0.21 0.41 1.09 0.13 2.38
(13) (1) (73) (5) (11) (28) (3) (61)
0.75 0.09 3.69 0.34 0.41 1.5
2.91
—
(19) (3) (94) (9) (11) (39)
(74)
Recommended fuse holders
Amps
Red Spot*
CAMaster*
Up to 30
RS32_
CM30CF
35-60
RS63_
CM60CF
80-100
RS100_
—
* See data sheet no. 10083 (Red Spot) and 4132 (CAMaster) for details.
Data sheet no. 4130
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
5-5
5 — IEC and British Standard fuses
HRC Form II current-limiting fuses
Dimensions — in (mm)
H
C
H07C offset blades
Volts
•
600 Vac (or less)
•
250 Vdc
F
A
G
J
E
D
B
•
Amps 2-600 A
•
IR 200 kA RMS Sym.
H
C
K07C, K07CR, L14C, M14C offset blades
Agency information
•
J
E
D
B
Ratings
•
F
A
G
HRC Form II bolt-on, ceramic body current-limiting fuses.
C
A
H
G
B
D
CSA, Class 1422-02, File 53787, BS88:2, IEC 60269:2, CE
(amps) catalog no.
E
F
L09C, M09C, P09C center blades
H07C offset blades
2H07C
6H07C
15H07C
25H07C
4H07C
10H07C
20H07C
30H07C
K
K
F
A
G
B
D
K07C offset blades
40K07C
60K07C
50K07C
80K07CR
100K07CR
L14C offset blades
80L14C
100L14C
M14C offset blades
125M14C*
150M14C*
200M14C*
L09C center blades
80L09C*
100L09C*
M09C center blades
125M09C
150M09C
200M09C
P09C center blades
250P09C*
300P09C*
350P09C*
400P09C*
350P11C
400P11C
P11C center blades
250P11C
300P11C
R11C center blades
450R11C
500R11C
600R11C
* Not suitable for installation in Red Spot fuse holders.
Typical applications
•
H
C
P11C, R11C center blades
Used to protect motor control circuits, together with contactors
and overload protection relays to provide Type 2 coordination per
IEC 60947-4.
Catalog
symbol/
style
A
B
H07C offset blades
1.38 0.56
2-30
(35) (14)
K07C offset blades
2.19 0.88
40-60
(56) (22)
2.19 0.88
80-100
(56) (22)
L14C offset blades
2.38 0.88
80-100
(60) (21)
M14C offset blades
2.56 1.5
125-200
(65) (38)
L09C center blades
2.38 0.88
80-100
(60) (21)
M09C center blades
2.56 1.5
125-200
(65) (38)
P09C center blades
3.06 2.31
250-400
(178) (59)
P11C center blades
3.06 2.31
250-400
(178) (59)
R11C center blades
3.19 2.88
450-600
(81) (73)
E
K
CSA
category
—
HRCII-C
—
HRCII-C
—
HRCIIMISC
4.38 0.56 0.13 3.69 0.34 0.44
1
(111) (14) (3) (94) (9) (11) (25)
—
HRCII-C
4.38 0.75 0.09 3.69 0.34 0.44
(111) (19) (2) (94) (9) (11)
—
—
HRCIIMISC
5 0.56 0.13 4.38 0.34 0.44
(127) (14) (3) (111) (9) (11)
—
—
HRCIIMISC
5.38 0.75 0.13 4.38 0.34 0.56
(136) (19) (3) (111) (9) (14)
—
—
HRCII-C
5.38 1 0.19 4.38 0.34
(136) (25) (5) (111) (9)
0.5
(13)
—
—
HRCIIMISC
8.25 1 0.19 5.25 0.41 0.63
(210) (25) (5) (133) (10) (16)
—
1
(25)
HRCII-C
8.25 1 0.25 5.25 0.41 0.63
(210) (25) (6) (133) (10) (16)
—
1
(25)
HRCII-C
C
D
E
F
G
H
J
3.38 0.38 0.06 2.88 0.22 0.31 0.56
(85) (9)
(1) (73) (6)
(8) (14)
3.44 0.5 0.06 2.88 0.22 0.31 0.88
(87) (13) (1) (73) (6)
(8) (22)
3.75 0.5 0.06 2.88 0.22 0.31 0.88
(95) (13) (1) (73) (6)
(8) (22)
Recommended fuse holders: Red Spot up to 400 amps (data sheet
no.10083) and CAMaster up to 100 amps (data sheet no. 4132).
Data sheet no. 4131
5-6
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
IEC and British Standard fuses — 5
SSD, NSD, ESD BS88 Part 1 fuses
The NSD and ESD are low voltage offset blade, ceramic body fuses
complying with general purpose gG characteristics.
Ratings
Volts 240-550 Vac
•
Amps
•
The STD to DEO type ceramic body, offset bolt-on blade low voltage
fuses complying with general purpose gG characteristics.
Ratings
•
2-63 A
•
20M25 to 63M100 motor starter ratings
•
Volts 240-550 Vac
•
Amps
IR
•
33 kA (SSD)
•
80 kA (NSD, ESD)
•
Agency information
•
•
Catalog no.*
SSD
NSD†
ESD†
Amps (class)
Max
Vac
BS88
ref.
2, 4, 6, 10, 16, 20, 25, 32 (gG)
240
E1
2, 4, 6, 10, 16, 20, 25, 32 (gG)
550
20M25, 20M32, 20M36, 32M36, 32M40,
32M50, 32M63 (gM)
415
2, 4, 6, 10, 16, 20, 25, 32 (gG)
550
40, 50, 63 (gG)
415
63M80, 63M100 (gM)
2-200 A
•
20M25 to 200M315 motor starter ratings
IR
•
33 kA (STD)
•
80 kA (NITD, AAO, BAO, CEO, DEO, OSD)
Agency information
Meets the requirements of BS88 Part 1 and IEC 60269-1, CE
Catalog
symbol
•
Meets the requirements of BS88 Part 1 and IEC 60269-1, CE
Catalog no.*
Catalog
symbol
STD
F1
NITD†
F2
AAO†
NSD
32NNSF
ESD
63ENSF
BS88
ref.
2, 4, 6, 10, 16, 20, 25, 32 (gG)
240
—
20M25, 20M32 (gM)
415
2, 4, 6, 10, 16, 20, 25, 32, (gG)
550
32M40, 32M50, 32M63 (gM)
500
500
63M80, 63M100 (gM)
CEO†
32, 40, 50, 63, 80, 100 (gG)
550
100M125, 100M160, 100M200 (gM)
415
125, 160, 200 (gG)
DEO†
415
200M315 (gM)
OSD†
550
32M40, 32M50, 32M63 (gM)
40, 50, 63 (gG)
BAO†
Recommended fuse holders
Catalog no.
Max
Vac
2, 4, 6, 10, 16, 20, 25, 32 (gG)
* To order, specify catalog symbol and amp rating, e.g., SSD20.
† "M" indicates motor starter ratings.
Fuse symbol
Amps (class)
80, 100 (gG)
500
100M125, 100M160 (gM)
415
—
A2
A3
A4
—
—
* To order, specify basic catalog symbol and amp rating. E.g., BAO16.
† "M" indicates motor starter ratings.
Typical applications
•
The STD type are used in 240 V street lighting cut-outs
•
NITD to DEO types used for industrial and general purpose
applications
Recommended fuse blocks and holders
Fuse catalog symbol
Block/holder catalog no.*
NITD
CM32FC, RS20_
AAO
CM32F, RS32_
BAO
CM63F, RS63_
OSD
CM100F, RS100_
CEO
BH-0111
* See data sheet no. 4132 (CM_), 10083 (RS_) and 1200 (BH-_).
Data sheet no. 4105 (SSD), 4100 (NSD) and 4101 (ESD)
Data sheet no. 4123 (STD), 4106 (NITD), 4109 (AAO),
4112 (BAO), 4107 (OSD), 4115 (CEO) and 4117 (DEO)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
5-7
IEC and British
Standard fuses
•
STD, NITD, AAO, BAO, OSD, CEO, DEO BS88 Part 1
fuses
5 — IEC and British Standard fuses
AC, AD, BC, BD, CD, DD, ED, EFS BS88 fuses
EF, FF, FG, GF, GG, GH BS88 fuses
Ceramic body, center blade two-hole bolt-on low voltage fuses that
comply with general purpose gG characteristics and available up to
400 amps with two hole mount and up to 1250 amps with four hole
mount.
Ceramic body, center blade four-hole bolt-on low voltage fuses
complying with general purpose gG characteristics and available up
to 400 amps with two hole mount and up to 1250 amps with four
hole mount.
Ratings
Ratings (see catalog numbers table)
•
•
•
Volts
•
415/550 Vac
•
415/690 Vac
•
250 Vdc
•
250/400 Vdc
Amps
•
2-400 A
•
63M80 to 400M500 motor starter ratings
Catalog no.*
AC
AD
BC†
BD
IR ( kA)
Amps (class)
AC
2, 4, 6, 10, 16, 20 (gG)
25, 32 (gG)
2, 4, 6, 10, 16, 20 (gG)
25, 32 (gG)
40, 50, 63 (gG)
63M80, 63M100 (gM)
40, 50, 63 (gG)
DC
DD†
100M125, 100M160,
100M200 (gM)
125, 160, 200 (gG)
200M250, 200M315 (gM)
ED
315M400 (gM)
IR see catalog numbers table
125, 160, 200, 250, 315
(gG)
550
AC
DC
80
40
AC
DC
BS88
ref.
—
C1
C2
—
FF
450, 500, 560, 630 (gG)
80
40
550
400
FG
450, 500, 560, 630 (gG)
80
40
550
400
—
250
—
GF
710, 800 (gG)
80
40
550
250
C3
500
250
—
80
40
500
250
—
500
—
80
—
415
—
80
—
415
—
B2
80
—
—
B3
B4
—
—
415
Amps (class)
Max volts
250
40
500
Catalog
symbol
IR ( kA)
EF†
80
550
Catalog no.*
BS88
ref.
40
500
Meets the requirements of BS88 Parts 1 and 2 and IEC 60269-1,
CE
DC
80
400M500 (gM)
EFS
AC
40
250, 315, 355, 400 (gG)
†
Max volts
80
CD80, CD100 (gG)
CD†
Amps 355-1250 A
•
•
Meets the requirements of BS88 Parts 1 and 2 and IEC 60269-1,
CE
Catalog
symbol
•
Agency information
IR see catalog numbers table
Agency information
•
Volts
•
B1
GG
GH
355, 400 (gG)
400M500 (gM)
710, 800 (gG)
80
1000, 1250 (gG)
710, 800, 1000, 1250
80
40
—
—
415
550
550
550
250
—
—
* To order, specify catalog symbol and amp rating, e.g., FG450.
† "M" indicates motor starter ratings.
550
80
—
415
* To order, specify catalog symbol and amp rating. E.g., BC40.
† "M" indicates motor starter ratings.
Recommended fuse blocks
Fuse catalog symbol
Modular block catalog no.*
AC
BH-0111
AD
BH-____
BC
BH-0111
BD
BH-____
CD
BH-____
DD
BH-____
ED
BH-1131
* See data sheet no. 1200 (BH-0_) and 1201 (BH-1_) for details.
Data sheets no. 4110 (AC), 4111 (AD), 4113 (BC), 4114 (BD),
4116 (CD), 4118 (DD), 4119 (ED) and 4121 (EFS)
5-8
Data sheet no. 4120 (EF), 4102 (FF), 4122 (FG), 4103 (GF),
4104 (GG) and 4108 (GH)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
—
D1
IEC and British Standard fuses — 5
D16, D27, D33, D125 DIN Type D Diazed fuses
NZ01, NZ02 DIN Type N Neozed fuses
DIN style Type D ceramic body low voltage fuses.
DIN style Type N ceramic body low voltage.
Ratings
Ratings
•
Volts 500 Vac
•
Volts 400 Vac
•
Amps 2-100 A
•
Amps 2-63 A
•
IR 50 kA
•
IR 50 kA
Agency information
IEC 60269 and DIN 49515, CE
Catalog no.
•
Amps
"D" dimension
Color code
2D16
2
6
Pink
4D16
4
6
Brown
6D16
6
6
Green
10D16
10
8
Red
Fig.
1
IEC 60269 and DIN 49515, CE
Catalog no.
Amps
"D" dimension
Color code
2NZ01
2
11
Pink
4NZ01
4
11
Brown
6NZ01
6
11
Green
10NZ01
10
11
Red
16D16
16
10
Grey
16NZ01
16
11
Grey
20D16
20
12
Blue
20NZ02
20
15
Blue
25D16
25
14
Yellow
25NZ02
25
15
Yellow
2D27
2
6
Pink
35NZ02
35
15
Black
4D27
4
6
Brown
50NZ02
50
15
White
63NZ02
63
15
Copper
6D27
6
6
Green
10D27
10
8
Red
16D27
16
10
Grey
20D27
20
12
Blue
25D27
25
14
Yellow
35D33
35
16
Black
50D33
50
18
White
63D33
63
20
Copper
80D125
80
5
Silver
100D125
100
7
Red
2
Dimensions — mm
IEC and British
Standard fuses
•
Agency information
D
3
36
4
Additional 500 V quick acting fuses in body sizes D16, D27, D33 and
D125 rated 2-100 A. Reference number suffixed "Q." E.g., 10D27Q.
Gauge rings and keys can also be supplied.
Dimensions — mm
21.5
13.2
50
D
Fig. 1
Fig. 2
Data sheet no. 4124
57
50
50
D
33.5
27.5
D
Fig. 3
D
Fig. 4
Data sheet no. 4124
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
5-9
5 — IEC and British Standard fuses
___NHG___B NH HRC fuses
___NHG___B NH HRC fuses
DIN 000 to 4 Class: gG/gL DIN square bodied, dual indication
industrial fuses with voltage conducting metal gripping lugs. They
are made of a steatite insulator, corrosion-proof (aluminum) metal
parts with full-contact and silver-plated copper blades. All NHG fuses
feature a selectivity ratio: 1:1.6 up to 500 Vac.
Ratings
•
Volts
•
500 Vac
•
690 Vac
•
Amps 2-1250 A
•
IR 120 kA
•
Frequency
•
45-62 Hz operating
Agency information
•
IEC 60269, VDE 0636, DIN 43620
•
CE (500 Vac only)
Dimensions — mm
a4
a3
e3
d
2 min.
c2
c1
e1
b
e4
f
e2
a2
a1
Fuse
size
000
00
0
01
1
02
2
03
3
4
a1
79
79
125
135
135
150
150
150
150
200
a2
54
54
68
75
75
75
75
75
75
84
a3
45
45
62
62
62
62
62
62
62
80
a4
49
49
68
68
68
68
68
68
68
90
b
15
15
15
15
20
20
25
25
32
50
c1
35
35
35
40
40
48
48
60
60
85
c2
10
11
11
11
11
11
11
11
11
11
D
e1
2
41
7.0 48
2.5 48
2.5 48
2.5 53
2.5 53
2.5 61
2.5 61
3.0 75
3 120
Recommended fuse blocks
Block catalog no.
SD00-D
Fuse size
000-00
SD1-D
1*, 1
SD2-D
02, 2, 03, 3
e2
21
30
30
30
52
52
60
60
70
87
e3
16
25
25
25
25
25
25
25
25
—
e4
6
6
6
6
6
6
6
6
6
8
f
8
15
15
15
15
15
15
15
18
30
500 Vac gG/gL dual indicator voltage conducting metal
gripping lugs
Amps
000 size
2
4
6
10
16
20
25
32
35
40
50
63
80
100
00 size
50
63
80
100
125
160
0 size
6
10
16
20
25
32
35
40
50
63
80
100
125
160
01 size
6
10
16
20
25
32
35
40
50
63
80
100
125
160
Data sheet no. 10164 (500 V), 720109 (690 V)
5-10
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Catalog no.
2NHG000B
4NHG000B
6NHG000B
10NHG000B
16NHG000B
20NHG000B
25NHG000B
32NHG000B
35NHG000B
40NHG000B
50NHG000B
63NHG000B
80NHG000B
100NHG000B
50NHG00B
63NHG00B
80NHG00B
100NHG00B
125NHG00B
160NHG00B
6NHG0B
10NHG0B
16NHG0B
20NHG0B
25NHG0B
32NHG0B
35NHG0B
40NHG0B
50NHG0B
63NHG0B
80NHG0B
100NHG0B
125NHG0B
160NHG0B
6NHG01B
10NHG01B
16NHG01B
20NHG01B
25NHG01B
32NHG01B
35NHG01B
40NHG01B
50NHG01B
63NHG01B
80NHG01B
100NHG01B
125NHG01B
160NHG01B
Amps
1 size
50
63
80
100
125
160
200
224
250
315
355
02 size
35
40
50
63
80
100
125
160
200
224
250
2 size
250
300
315
355
400
425
450
500
03 size
250
315
355
400
3 size
315
355
400
425
450
500
630
800
4 size*
500
630
800
1000
1250
Catalog no.
50NHG1B
63NHG1B
80NHG1B
100NHG1B
125NHG1B
160NHG1B
200NHG1B
224NHG1B
250NHG1B
315NHG1B
355NHG1B
35NHG02B
40NHG02B
50NHG02B
63NHG02B
80NHG02B
100NHG02B
125NHG02B
160NHG02B
200NHG02B
224NHG02B
250NHG02B
250NHG2B
300NHG2B
315NHG2B
355NHG2B
400NHG2B
425NHG2B
450NHG2B
500NHG2B
250NHG03B
315NHG03B
355NHG03B
400NHG03B
315NHG3B
355NHG3B
400NHG3B
425NHG3B
450NHG3B
500NHG3B
630NHG3B
800NHG3B
500NHG4G
630NHG4G
800NHG4G
1000NHG4G
1250NHG4G
* Size 4 is a a single indicator fuse
with slotted end blades.
Eaton.com/bussmannseries
IEC and British Standard fuses — 5
___NHG___B NH HRC fuses
JKS-700 fast-acting fuses
Amps
Catalog no.
Amps
000 size
Catalog no.
2 size
The JKS-700 is a fast-acting,
current-limiting fuse that is
UL Recognized and has CSA
Component Acceptance for
applications up to 700 Vac. The
JKS-700 is available in ratings
up to 60 amps with the same
dimensions as a standard Class J
fuses; but its voltage rating places
it outside the standard Class J fuse
class.
2
2NHG000B-690
200
200NHG2B-690
4
4NHG000B-690
224
224NHG2B-690
6
6NHG000B-690
250
250NHG2B-690
10
10NHG000B-690
315
315NHG2B-690
16
16NHG000B-690
3 size
20
20NHG000B-690
250
250NHG3B-690
25
25NHG000B-690
315
315NHG3B-690
32
32NHG000B-690
355
355NHG3B-690
35
35NHG000B-690
400
400NHG3B-690
40
40NHG000B-690
425
425NHG3B-690
•
Volts 700 Vac (or less)
50
50NHG000B-690
500
500NHG3B-690
•
Amps 25-60 A
63
63NHG000B-690
4 size**
•
IR
00 size
50
50NHG00B-690
63
63NHG00B-690
80
80NHG00B-690
100
100NHG00B-690
125
125NHG00B-690
160*
160NHG00B-690
Bussmann recommends the JM70100 modular fuse block and the
JM70100-MW power distribution fuse block for the 30 amp case size
JKS-700 fuses. See page 8-18 for details.
Ratings
630
630NHG4B-690
•
Minimum 6In
800
800NHG4B-690
•
200 kA RMS Sym.
* 160 amps rated at 660 Vac.
** Size 4 is a single indicator fuse with
slotted end blades.
1 size
Operating class aR
Agency information
•
UL Recognized, 248-13 Semiconductor Fuses, File E56412
•
CSA Component Acceptance, C22.2 No 248.13 Semiconductor
Fuses, Class 1422-30
50
50NHG1B-690
63
63NHG1B-690
Features
80
80NHG1B-690
•
100
100NHG1B-690
125
125NHG1B-690
Current limitation for non-inductive circuits provides currentlimiting response to maximum ground fault and short-circuit
conditions
160
160NHG1B-690
•
200 kA interrupting rating provides protection at all circuit locations
200
200NHG1B-690
•
Economical circuit protection for high-fault current circuits
224
224NHG1B-690
Typical applications
250
250NHG1B-690
•
Power panelboards up to 700 Vac
•
Machinery disconnects up to 700 Vac
Catalog no. (amps)
JKS-25-700
Data sheet no. 10164 (500 V), 720109 (690 V)
JKS-30-700
JKS-35-700
JKS-60-700
Data sheet no. 1026
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
5-11
IEC and British
Standard fuses
690 Vac gG/gL dual indicator voltage conducting metal
gripping lugs
5 — IEC and British Standard fuses
SD_ and TD_ NH fuse blocks
Shroud kits
NH fuse bases feature thermoplastic bodies, and DIN-Rail and screw
mounting (size 4 is screw fix). They are available with a range of
protection accessories for live parts for IP20 protection.
Ratings
•
Volts
•
690 Vac
•
1000 Vac (SD1-D only)
•
Amps up to 1250 A
•
NH fuse sizes 000 to 4
Agency information
•
IEC 60269-1 and 2
•
VDE 0636-1 and 2
Typical applications
•
Protecting industrial circuits and electrical apparatus
Catalog no.
Fuse
size
Poles
Amps
Catalog no.
Carton
qty.
Accepts fuse
sizes
DIN-Rail or screw mount
00
1
2
3
1
160
3
1
250
3
1
400
3
1
630
3
Catalog no.
SD00-D
3
TD00-D
1
SD1-D
3
TD1-D
1
SD2-D
3
TD2-D
1
SD3-D
3
TD3-D
1
SD4-S
3
000 and 00
01 and 1
02 and 2
03 and 3
1
1250
Neutrals
NH size
Amps
Catalog no.
Carton qty.
1
250
SDL-1
3
2
400
SDL-2
3
3
630
SDL-3
3
TD00-D
TD1-IP20
TD1-D
TD2-IP20
TD2-D
TD3-IP20
TD3-D
SD00-SK
SD00-D
SD12-SK
SD1 and SD2
SD3-SK
SD3
Phase barrier kits
Screw mount only
4
Fits fuse block
TD00-IP20
4
Catalog no.
Fits fuse block
SD00-PB
SD00-D
SD12-PB*
SD1 and SD2
SD3-PB*
SD3
* Kits include 2 phase barriers and 2 ganging links.
Fuse extraction handle
Size
Catalog no.
Carton qty.
C00-3
FEH
1
Data sheet 10163
5-12
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
IEC and British Standard fuses — 5
Class gG IEC 60269 industrial ferrule fuses
10 to 22mm diameter IEC Class gG fuses with optional indicators
(10x38mm only) and strikers. See catalog numbers for availability
and ratings.
Class gG, 400, 500 and 690 Vac, 2 to 125 A
Catalog no.
Standard
W/ striker
C22G2
—
C22G4
C22G6
C22G8
C22G10
C22G12
C22G16
C22G20
C22G25
C22G32
C22G40
C22G50
C22G63
C22G80
C22G100
C22G125
C22G4S
C22G6S
C22G8S
C22G10S
C22G12S
C22G16S
C22G20S
C22G25S
C22G32S
C22G40S
C22G50S
C22G63S
C22G80S
C22G100S
C22G125S
Vac
Amps
IR (kA)
Holder/block
2
690
500
400
4
6
8
10
12
16
20
25
32
40
50
63
80
100
125
80
CH22 DIN-Rail*,
JM70100 block
120
* Use striker version to actuate optional, external microswitch.
10x38mm, Class gG, 500 and 400 Vac, 0.5 to 50 A
Dimensions — mm
W/ indicator
—
—
—
—
—
—
—
—
—
—
—
—
—
C10G321
C10G40I
C10G50I
Vac
500
400
400
500
500
400
Amps
0.5
1
2
4
6
8
10
12
16
20
25
32
32
32
40
50
IR (kA)
Holder/block
C
D
ØA
ØE
B
120
CHM DIN-Rail*,
BMM block
Catalog
symbol
Indicator/striker
ØA
B
C
D
ØE
C10G
10
38
10
—
—
C14G
14.3
51
13
8
4
C22G
22
58
16
8
4
* Not recommended for use with indicator version.
14x51mm, Class gG, 400, 500 and 690 Vac, 1 to 50 A
Catalog no.
Standard
C14G1
C14G2
—
C14G4
—
C14G6
—
C14G8
—
C14G10
—
C14G12
—
C14G16
—
C14G20
—
C14G25
—
C14G32
C14G40
C14G50
W/ striker
—
—
C14G2S
—
C14G4S
—
C14G6S
—
C14G8S
—
C14G10S
—
C14G12S
—
C14G16S
—
C14G20S
—
C14G25S
C14G32S
C14G40S
C14G50S
Vac
690
500
690
500
690
500
690
500
690
500
690
500
690
500
690
500
690
500
400
Amps
1
2
4
6
8
10
12
16
20
25
32
40
50
IR ( kA)
Holder
80
120
80
120
80
120
80
120
80
120
80
120
80
120
80
120
80
CH14 DIN-Rail**
120
** Not recommended for use with indicator version, use striker version to actuate
optional, external microswitch
Data sheet no. 720115
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
5-13
IEC and British
Standard fuses
Catalog no.
Standard
C10G0.5
C10G1
C10G2
C10G4
C10G6
C10G8
C10G10
C10G12
C10G16
C10G20
C10G25
C10G32
C10G32
—
—
—
.22x58mm,
5 — IEC and British Standard fuses
Class aM IEC 60269 industrial ferrule fuses
10 to 22mm diameter IEC Class aM fuses with optional indicators
(22x58mm only) and strikers. See catalog numbers for availability
and ratings.
10x38mm, Class aM, 500 and 400 Vac, 0.25 to 25 A
Catalog no.
Standard
C10M0.5
C10M1
C10M2
C10M4
C10M6
C10M8
C10M10
C10M12
C10M16
C10M20
C10M25
Vac
Amps
0.5
1
2
4
6
8
10
12
16
20
25
500
400
IR (kA)
W/ striker
—
—
—
—
C14M2S
—
C14M4S
—
C14M6S
—
C14M8S
—
C14M10S
—
C14M12S
—
C14M16S
—
C14M20S
—
C14M25S
C14M32S
C14M40S
C14M50S
Vac
690
500
690
500
690
500
690
500
690
500
690
500
690
500
690
500
690
500
400
Catalog no.
W/
Standard indicator
C22M2
—
C22M4
—
C22M6
—
C22M8
—
C22M10
—
C22M12
—
C22M16
—
C22M20
—
C22M25
—
C22M32
—
C22M40
—
C22M50
—
C22M63
—
C22M80
—
C22M100 —
C22M125 C22M125I
W/ striker
—
—
—
—
—
C22M12S
C22M16S
C22M20S
C22M25S
C22M32S
C22M40S
C22M50S
C22M63S
C22M80S
C22M100S
C22M125S
Vac Amps IR (kA) Holder/block
2
4
6
8
10
12
690
16
80
20
CH22 DIN-Rail*,
JM70100 block
25
32
40
50
63
80
500
100
120
400 125
* Not recommended for use with indicator version, use striker version to actuate
optional, external microswitch.
Holder/block
Dimensions — mm
C
D
ØA
B
Catalog
symbol
Amps
0.25
0.5
1
2
4
6
8
10
12
16
20
25
32
40
50
ØE
CHM Din-Rail,
BMM block
120
14x51mm, Class aM, 400, 500 and 690 Vac, 0.25 to 50 A
Catalog no.
Standard
C14M0.25
C14M0.5
C14M1
C14M2
—
C14M4
—
C14M6
—
C14M8
—
C14M10
—
C14M12
—
C14M16
—
C14M20
—
C14M25
—
C14M32
C14M40
C14M50
22x58mm, Class aM, 400, 500 and 690 Vac, 2 to 125 A
IR (kA)
80
80
120
80
120
80
120
80
120
80
120
80
120
80
120
80
120
80
Indicator/striker
ØA
B
C
D
ØE
C10M
10
38
10
—
—
C14M
14.3
51
13
8
4
C22M
22
58
16
8
4
Holder
CH14 DIN-Rail**
120
** Use striker version to actuate optional, external microswitch.
Data sheet no. 720115
5-14
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
IEC and British Standard fuses — 5
HRC fuse holders
CAMaster
SAFEloc
The Bussmann series CAMaster
HRC fuse holder features a
unique cam-action for easy
fuse removal while allowing
significantly improved contact
pressure between fuse carrier
and base contact that enhances
electrical performance. A range
of lockable safety carriers for the
fuse holder (catalog reference
LSC), are available.
•
Volts 690 V
The Bussmann series SAFEloc
HRC fuse holders (for use with
HRCI-CB fuses) provides a
positive, stress-free fuse fitting
and locks it in position to ensure
safe insertion and withdrawal
from the base. Base contacts are
fully shrouded to help protect
against electric shock. Shrouds
utilize simple slide/snap action
allowing access to the contact
terminal screws. It can be
mounted on a 35mm DIN-Rail
or panel-mounted with a single
screw.
•
Amps up to 100 A
Ratings
Agency information
•
CSA C22.2 No. 39; IEC 269 and BS88, CE
Catalog no.
Amps
CM20CF
30
CM30CF
30
CM60CF
60
CM100CF
100
Details for
Fuses accepted
HRCI-CA applications
HRCII applications
_CIF21
_H07C
_K07C
_K07CR
Accessories
Catalog no.
Amps
30
32BS
30
Description
All
20LSC
30
32LSCC
30
CAMaster accepted
CM20CF
Back stud
60/100
GLP
63/100LSC
Volts 600 V
•
Amps 30-60 A
Agency information
•
Designed to accommodate the compact range of offset blade fuse
to CSA C22.2 No. 106, HRCI-CB, CE
Catalog no.*
CM30CF
CM60/100CF
Ganging link kit
3-Pole
CM20CF
Security carrier
with clip
60/100
Amps
C30F
C30BS
20BS
60/100BS
•
Fuses accepted
Front
30
C30FBS
Back
_CIF06
Front-back
C60F
C60BS
Connection
Front
60
C60FBS
Back
EK-(amp)
Front-back
* For use with HRCI-CB fuses.
Bussmann series Red Spot fuse holders
CM30CF
CM60/100CF
These versatile CSA Certified and IP20 finger-safe fuse holders for
BS88 HRC industrial fuses are available in ratings from 20 to 400
amps.
Padlock inserts, warning carriers and fuse adapter accessories
enhance safety and application flexibility.
See data sheet no. 10083 for details.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
5-15
IEC and British
Standard fuses
Ratings
BUSSMANN
SERIES
Enhanced safety.
Improved system reliability.
Simplified inventory.
It’s easier than ever to improve
your circuit protection while
efficiently reducing your fuse
inventory.
Leveraging Bussmann™ series
ultimate protection fuses, our
Low-Peak™ Upgrade program
couples the industry’s most
advanced circuit protection with
our extensive knowledge to deliver
enganced safety, improved system
reliability and simplified inventory.
In just three simple steps,
you’ll save time and increase
productivity. All by using
Bussmann series Low-Peak fuses.
Three steps to ultimate protection:
1
Audit
2
Analyze
3
Implement
Visit Eaton.com/bussmannseries to
learn more.
Follow us on social media to get the
latest product and support information.
Photovoltaic fuses, holders, and blocks — 6
Contents
Section
page
Description
Fuse size
PVM
13/32" x 1-1/2"
Volts
600
Amps
4-30
PVS-R
RK5
600
20-400
PV-_A10_
10x38mm
1000
1-20
HPV
In-line assembly
1000/1500
1-20
PV-_A14F
14x51mm
1000/1100
15-32
PV-_ANH_
NH1, 2, 3
1000
32-400
PV-_A10F85L
10x85mm
1500
2.25-25
PV15M-4A-CT
Crimp terminal
1500
4
PV-_A-_XL
XL 01, 1, 2, 3
Holder
Fuse size
CHPV_
10x38mm
1000
30
Blocks
Fuse size
Volts
Amps
BPVM-_
10x38mm
1000
30
CHPV15L85
10x85 and
14x85mm
1500
32
SD_-S-PV
01XL to 3L
1500
Up to 630
SD_-D-PV and
TD_D-PV
NH1, 2, 3
1500
Up to 630
1000/1500
50-600
Volts
Amps
2
3
4
5
6
7
8
9
10
11
PV fuses, holders,
blocks and SPDs
Complete and reliable
solar circuit protection
Fuses
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
6-1
6 — Photovoltaic fuses, holders and blocks
PVM 600 Vdc 13/32" x 1-1/2" midget PV fuses
PVS-R 600 Vac/dc Class RK5 PV fuse
A range of UL 248-19 fastacting 600 Vdc 13/32" x 1-1/2"
(10x38mm) midget fuses
specifically designed to protect
solar power systems in extreme
ambient temperature, high
cycling and low level fault current
conditions (reverse current, multiarray fault).
A range of UL 248-19 fastacting 600 Vdc Class RK5 fuses
specifically designed to protect
photovoltaic power systems in
extreme ambient temperature,
high cycling and low level fault
current conditions (reverse
current, multi-array fault).
2011/65/EU
Ratings
Ratings
•
Volts
Volts 600 Vdc
•
600 Vac to UL 248-12
•
Amps 4-30 A
•
600 Vdc to UL 248-19
•
IR 50 kA DC (4-30 A)
•
Agency information
•
•
Amps 20-400 A
•
IR
UL Listed 248-19, Guide JFGA, File E335324,
CSA Component Certified C22.2, RoHS compliant, CE
Watts loss
•
200 kA RMS Sym. AC
•
20 kA DC (20-60 A)
•
10 kA DC (70-400 A)
Agency information
Power loss (watts)
Catalog no.
Amps
0.8 In
In
PVM-10
10
1.0
1.9
PVM-15
15
1.0
1.7
PVM-30
30
1.6
2.9
•
UL Listed, Std. 248-12, Class RK5, Guide JFGA, File E335324.
Photovoltaic to UL 248-19, CSA Component Certified C22.2, CE
Catalog no. (amps)
PVS-R-20
PVS-R-60
PVS-R-125
PVS-R-300
PVS-R-25
PVS-R-70
PVS-R-150
PVS-R-350
PVS-R-400
Catalog no. (amps)
PVS-R-30
PVS-R-80
PVS-R-175
PVM-4
PVM-7
PVM-10
PVM-20
PVS-R-35
PVS-R-90
PVS-R-200
PVM-5
PVM-8
PVM-12
PVM-25
PVS-R-40
PVS-R-100
PVS-R-225
PVM-30
PVS-R-50
PVS-R-110
PVS-R-250
PVM-6
PVM-9
PVM-15
Features
Features
•
Specifically designed to protect photovoltaic systems in extreme
ambient temperature per UL 248-19 listed
•
Capable of withstanding high cycling and low level fault current
conditions
Typical applications
•
Current limitation for non-inductive circuits provides Class
RK5 current-limiting response to ground fault and short-circuit
conditions
•
Designed for the protection and isolation of photovoltaic systems
Typical applications
•
Combiner boxes
•
Photovoltaic systems
•
String protectors
•
Inverters
•
Photovoltaic system DC safety switches
•
Recombiner boxes
Recommended fuse holders and blocks, see pages 6-8 and 6-9.
Recommended fuse blocks, see page 8-19.
Data sheet no. 2153
6-2
Data sheet no. 4203
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Photovoltaic fuses, holders, and blocks — 6
Features
PV 1000 Vdc 10x38mm PV fuses
A range 10x38mm, 1000 Vdc PV fuses
for the protection and isolation of
photovoltaic strings that are specifically
designed for use in PV systems with
extreme ambient temperature, high
cycling and low fault current conditions
(reverse current, multi-array fault)
string arrays. For application flexibility,
the PV 10x38mm fuse is available as
a cylindrical fuse as well as bolt-on,
single and dual PCB tab and in-line
crimp terminal versions.
2011/65/EU
•
Meets UL and IEC photovoltaic standards for global acceptance
•
Low watts loss performance for energy efficiency
•
Low temperature rise performance for more precise sizing
•
In-line crimp terminal version is easy to apply in wire harness
construction
Typical applications
Ratings
•
Combiner boxes
•
Inverters
•
PV wire harnesses
Recommended fuse blocks, holders and fuseclips
•
Volts 1000 Vdc
•
Amps 1-20 A
•
BPVM modular fuse block with optional cover, see page 6-9
•
IR 50 kA
•
CHPV 1- and 2-pole modular fuse holders with optional open fuse
indication, see page 6-8
•
1A3400-09 PCB fuseclip, see page 3-16
•
HPV in-line fuse holder assembly, see page 6-4
Terminals and conductors
•
Crimp connection for single, 75°C/90°C Cu Stranded 12-8 AWG
PV wire
Agency information
•
UL Listed to 248-19†, Guide JFGA, File E335324, IEC 60269-6
(gPV), CSA File 53787, Class 1422-30 (1-15A), 20 A Pending, CCC
(1-20 A), RoHS Compliant
Catalog no. (amp)
I2t (A2s)
Watts loss
Amps
Pre-arcing
Total @rated volts
0.8 In
In
PV-1A10F-CT
1
0.15
0.4
0.8
1.5
PV-2A10F-CT
2
1.2
3.4
0.6
1.0
4
11
0.8
1.3
6.6
18
0.9
1.4
9.5
26
1.0
1.5
19
50
1.0
1.6
6
30
90
1.1
1.8
PV-8A10F-CT
8
3
32
1.2
2.1
PV-10A10F-CT
10
7
70
1.2
2.3
PV-12A10-2P
PV-12A10F-CT
12
12
120
1.5
2.7
PV-15A10-2P
PV-15A10F-CT
15
22
220
1.7
2.9
PV-20A10-2P
PV-20A10F-CT
20
34
350
2.1
3.6
Cylindrical
Bolt-on
PCB single pin
PCB double pin
Crimp terminal
PV-1A10F
PV-1A10-T
PV-1A10-1P
PV-1A10-2P
PV-2A10F
PV-2A10-T
PV-2A10-1P
PV-2A10-2P
PV-3A10F
PV-3A10-T
PV-3A10-1P
PV-3A10-2P
PV31A10F-CT
3
PV-3-5A10F
PV-3-5A10-T
PV-3-5A10-1P
PV-3-5A10-2
PV-3.5A10F-CT
3.5
PV-4A10F
PV-4A10-T
PV-4A10-1P
PV-4A10-2P
PV-4A10F-CT
4
PV-5A10F
PV-5A10-T
PV-5A10-1P
PV-5A10-2P
PV-5A10F-CT
5
PV-6A10F
PV-6A10-T
PV-6A10-1P
PV-6A10-2P
PV-6A10F-CT
PV-8A10F
PV-8A10-T
PV-8A10-1P
PV-8A10-2P
PV-10A10F
PV-10A10-T
PV-10A10-1P
PV-10A10-2P
PV-12A10F
PV-12A10-T
PV-12A10-1P
PV-15A10F
PV-15A10-T
PV-15A10-1P
PV-20A10F
PV-20A10-T
PV-20A10-1P
Data sheet no. 10121
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
6-3
PV fuses, holders,
blocks and SPDs
† Except crimp terminal version that is UL Recognized to UL 248-19, Guide JFGA2,
File E335324.
6 — Photovoltaic fuses, holders and blocks
HPV 1000 Vdc in-line PV fuse assembly
PV 1000/1100 Vdc 14x51mm PV fuses
A single-pole, non-serviceable photovoltaic in-line fuse holder and
fuse assembly in an IP67 dust tight, submersible insulating boot for
use in photovoltaic wire harnesses.
A range of 14x51mm PV fuses
specifically designed for protecting
and isolating photovoltaic strings.
These fuses are capable of
interrupting low overcurrents
associated with faulted PV systems
(reverse current, multi-array fault).
2011/65/EU
Ratings
•
Volts
•
1000 Vdc
•
1500 Vdc (HPV-D15V-4A only)
•
Amps 1-20 A
•
IR 33 kA
Ratings
•
Agency information
•
UL Listed to 4248-1 and 4248-19, File E 348242, CSA Component
Acceptance, Class 6225 30, File # 47235, IP67 submersible, RoHS
compliant, CE
Terminals and conductors
•
•
1000 Vdc (25 and 32 A)
•
1100 Vdc (15 and 20 A)
Amps 15-32 A
•
IR 10 kA
Agency information
•
Crimp connection for single, 75°C/90°C Cu Stranded 12-8 AWG PV
wire
UL Listed, Guide JFGA, File E335324. Photovoltaic to, UL 248-19,
IEC 60269-6 gPV, CSA Pending, CCC Pending, RoHS compliant
I2t (A2s)
Catalog no.
PV-15A14F
UL 5VA flammability resistant rated elastomer, UV resistant to UL
F1 suitable for outdoor use.
Operating and storage temperature range
•
Volts
•
Boot material
•
2011/65/EU
-40°C to +90°C
Watts loss
Amps
Pre-arcing
Total @ rated volts
0.8 In
In
15
14
265
2.1
4
PV-20A14F
20
27
568
2.7
5
PV-25A14F
25
65
943
2.7
5.1
PV-32A14F
32
120
1740
3.3
6.2
Features
Packaging
•
Bulk packed in cartons, 180 fuse assemblies per carton. Carton
weight 19.3 lbs (8.7543 kg).
•
Fuse assemblies poly bagged with PV fuse element, two
insulating boots (for lineside and loadside), and one pressure
sensitive label to be applied on outside after complete assembly to
the wire harness.
•
Specifically designed to provide fast-acting protection under low
fault current conditions associated with PV systems
•
High DC voltage rating
•
Demonstrated performance in extreme temperature cycling
conditions
Typical applications
Catalog no. (amps)*
•
Combiner boxes
1000 Vdc
•
Inverters
HPV-DV-1A
HPV-DV-3.5A
HPV-DV-8A
HPV-DV-2A
HPV-DV-4A
HPV-DV-10A
HPV-DV-2.5A
HPV-DV-5A
HPV-DV-12A
HPV-DV-3A
HPV-DV-6A
HPV-DV-15A
HPV-DV-20A
Recommended fuse holder
•
CH141B-PV DIN-Rail modular fuse holder, see data sheet no.
720148 for more information.
1500 Vdc
HPV-D15V-4A
* For PV-(amp)A10F-CT fuse specifications and derating curves see data sheet no.
10121 at Eaton.com/bussmannseries.
Recommended tools
•
Sta-Kon™ terminal crimping tool, catalog no. ERG4002
•
Multi-Contact assembly tool, catalog no, PV-RWZ with PV-KOI+II
and PV-KOIII tapered spindles
Data sheet no.: 2157
6-4
Data sheet no. 720132
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Photovoltaic fuses, holders, and blocks — 6
NH 1000 Vdc blade and bolt-on PV fuses
A range of 1000 Vdc NH size
Photovoltaic (PV) fuses specifically
designed for protecting and
isolating array combiners/
re-combiners, disconnects and
inverters.
2011/65/EU
Ratings
•
Volts 1000 Vdc
•
Amps 32-400 A
•
IR 50 kA
Agency information
•
UL Listed, Guide JFGA, File E335324, Photovoltaic to UL 248-19,
IEC 60269-6 gPV, CSA Class 1422-30, File 53787 (32-160 A), UL
Listed, IEC gPV, CSA, CCC Pending, RoHS compliant
Features
•
Compact size saves panel space and extends design flexibility
•
Bolt-on versions have common hole centers for standardizing
busbar designs across 63-400 amp range
•
Low power loss for greater efficiency and lower operating
temperature
•
Global agency standards simplifies design considerations for
worldwide markets
•
Dual indication feature and optional microswitches make system
monitoring easier
Catalog no.
Blade versions
PV-32ANH1
PV-40ANH1
PV-50ANH1
PV-63ANH1
PV-80ANH1
PV-100ANH1
PV-125ANH1
PV-160ANH1
PV-200ANH1
PV-250ANH2
PV-300ANH3
PV-315ANH3
PV-350ANH3
PV-355ANH3
PV-400ANH3
Bolt-on versions
PV-63ANH1-B
PV-80ANH1-B
PV-100ANH1-B
PV-125ANH1-B
PV-160ANH1-B
PV-200ANH1-B
PV-250ANH2-B
PV-315ANH3-B
PV-355ANH3-B
PV-400ANH3-B
NH
size
1
2
3
1
2
3
Amps
I2t (A2S)
PreTotal @
arcing
1000V
Watts loss
0.8 In
In
32
40
50
63
80
100
125
160
200
250
300
315
350
355
400
80
185
400
470
640
1300
2600
5200
10,200
17,000
32,000
32,000
44,500
44,500
67,500
720
1670
3600
4300
5760
11,700
23,400
46,800
82,000
136,000
260,000
260,000
370,000
370,000
550,000
4
5
6
6
8
8
9
14
13
19
24
26
27
28
30
8
9
11
12
15
16
17
27
25
38
40
44
45
46
50
63
80
100
125
160
200
250
315
355
400
470
640
1300
2600
5200
10,200
17,000
32,000
38,000
61,000
4300
5760
11,700
23,400
46,800
82,000
136,000
260,000
310,000
490,000
6
8
8
9
14
13
19
26
29
32
12
15
16
17
27
25
38
44
48
50
•
Recombiner boxes
•
Inverters
PV fuses, holders,
blocks and SPDs
Typical applications
Recommended fuse blocks
•
SD_ and TD_, see page 6-11
Optional microswitches†
Catalog no.
Tab size - mm (inch)
170H0236
250/6.3 (1/4)
170H0238
110/2.8 (0.11)
BVL50
187/4.8 (3/16)
Connection
Volts
Quick connect
250
Amps
2
2
6
Blade versions mount in fuse blocks
† For use with bladed version.
Bolt-on versions mount directly to busbas and conductor terminals
Data sheet no. 720133
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
6-5
6 — Photovoltaic fuses, holders and blocks
Agency information
PV 1500 Vdc 10x85mm PV fuses
A range of 10x85mm PV fuses specifically
designed for protecting and isolating
photovoltaic strings. These fuse links are
capable of interrupting low overcurrents
associated with faulted PV systems
(reverse current, multi-array fault).
2011/65/EU
•
UL 248-19
•
IEC 60269
•
RoHS compliant
Features
Mounts in Bussmann series CHPV15L85
DIN-Rail holder. See page 6-10.
•
Designed for fast-acting protection under low fault current
conditions associated with PV systems
Ratings
•
UL and IEC photovoltaic standards for global product acceptance
•
Low watts loss for greater PV system efficiency
•
Volts 1500 Vdc
•
Amps 2.25-30 A
•
IR 30 kA, 1 ms
Typical applications
•
Combiner boxes, wire harnesses
Operating class
•
gPV
I2t (A2s)
Catalog no.
Watts loss (W)
Amps
Pre-arcing
Total at 1500 Vdc
0.8 In
In
PV-2.25A10F85L
2.25
3
10
1.4
2.4
PV-2.5A10F85L
2.5
4
10
1.3
2.1
3
7
20
1.3
2.2
3.5
10
20
1.6
2.6
PV-3A10F85L
PV-3-5A10F85L
PV-4A10F85L
4
15
30
1.7
2.8
PV-5A10F85L
5
33
60
1.7
2.8
PV-12A10F85L
12
19
240
2.1
3.5
PV-15A10F85L
15
42
300
2.2
3.6
PV-16A10F85L
16
48
350
2.1
3.5
PV-20A10F85L
20
108
800
2.7
4.5
PV-25A10F85L
25
190
1400
3.4
5.6
PV-30A10F85L
30
268
1090
4.0
6.6
Data sheet no. 10658
PV15M-4A-CT 1500 Vdc in-line PV fuse with crimp
terminals
Catalog number
Bussmann series PV15M-4A-CT is a 1500 Vdc in-line photovoltaic
fuse with crimp terminals for use in wire harnesses and other
applications where an in-line PV fuse is desirable.
Conductor
•
•
PV15M-4A-CT
Single PV stranded 75/90°C Cu
This in-line fuse can be electrically insulated with customer-supplied
overmolding or approved heat-shrink.
Operating temperature range
Ratings
-40°C to 90°C
2011/65/EU
•
Volts 1500 Vdc
•
Amps 4 A
•
IR 15 kA DC
•
Time constant 3 ms max.
•
Agency information
•
UL Recognized, 248-19, File E484317 Vol. 1 Sec. 1, CSA pending,
RoHS compliant
Data sheet no. 10639
6-6
Materials
Copper terminals with ceramic fuse body
Features
•
Crimp terminals eliminate the need for a fuse holder or block
•
1500 Vdc rating is ideally suited for today's efficient, higher-voltage
PV systems
Recommended tools
Sta-Kon® terminal crimping tool, catalog no. ERG4002
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Photovoltaic fuses, holders, and blocks — 6
XL 1000 Vdc and 1500 Vdc PV fuses
Features
A range of XL size PV fuses specifically designed for protecting
and isolating photovoltaic array combiners and disconnects. These
fuses are capable of interrupting low overcurrents associated with
faulted PV systems (reverse current, multi-array fault). Optional
microswitches available for use in monitoring systems.
•
High DC voltage rating with fast-acting protection under low fault
current conditions for PV systems
•
Blade or bolt-on mounting for application flexibility
•
Demonstrated performance in extreme temperature cycling
conditions
Ratings
Typical applications
2011/65/EU
Volts
•
1000 Vdc (63-600 A)
•
1500 Vdc (50-500 A)
•
Amps (see table)
•
IR (see table)
•
Recommended fuse blocks
•
UL 248-19, Guide JFGA, File E335324, IEC 60269-6 gPV,
CSA Class 1422-30, File 53787, RoHS Compliant
XL size
1000 Vdc
01
1
2
3
SD_-S-PV blocks, see page 6-10
Optional microswitches
Agency information
•
Recombiner boxes, Inverters
•
Blade: 170H0235 or 170H0237 for size 01XL, 70H0236 or
170H0238 for sizes 1XL, 2XL and 3L
•
Bolt-on: 170H0069 for all sizes
Catalog no.
Bladed version
Bolt-on version
Amps
IR (kA)
Pre-arcing
PV-63A-01XL
PV-80A-01XL
PV-100A-01XL
PV-125A-01XL
PV-160A-01XL
PV-200A-1XL
PV-160A-2XL
PV-200A-2XL
PV-250A-2XL
PV-315A-2XL
PV-355A-2XL
—
—
—
—
—
PV-350A-3L
PV-400A-3L
PV-500A-3L
PV-600A-3L
PV-63A-01XL-B
PV-80A-01XL-B
PV-100A-01XL-B
PV-125A-01XL-B
PV-160A-01XL-B
PV-200A-1XL-B
PV-160A-2XL-B
PV-200A-2XL-B
PV-250A-2XL-B
PV-315A-2XL-B
PV-355A-2XL-B
PV-160A-2XL-3B*
PV-200A-2XL-3B*
PV-250A-2XL-3B*
PV-315A-2XL-3B*
PV-355A-2XL-3B*
PV-350A-3L-B
PV-400A-3L-B
PV-500A-3L-B
PV-600A-3L-B
63
80
100
125
160
200
160
200
250
315
355
160
200
250
315
355
350
400
500
600
50
50
50
50
50
33
33
33
33
33
33
33
33
33
33
33
50
50
50
50
260
490
870
1930
3900
9400
2780
4950
9450
16,600
26,000
2780
4950
9450
16,600
26,000
31,000
44,500
85,000
137,000
PV-50A-01XL-15
PV-63A-01XL-15
PV-80A-01XL-15
PV-100A-01XL-15
PV-125A-01XL-15
PV-160A-01XL-12
PV-100A-1XL-15
PV-125A-1XL-15
PV-160A-1XL-15
PV-200A-1XL-15
PV-125A-2XL-15
PV-160A-2XL-15
PV-200A-2XL-15
PV-250A-2XL-15
—
—
—
—
PV-250A-3L-15
PV-315A-3L-15
PV-350A-3L-15
PV-355A-3L-15
PV-400A-3L-15
PV-450A-3L-15
PV-50A-01XL-B-15
PV-63A-01XL-B-15
PV-80A-01XL-B-15
PV-100A-01XL-B-15
PV-125A-01XL-B-15
PV-160A-01XL-B-12
PV-100A-1XL-B-15
PV-125A-1XL-B-15
PV-160A-1XL-B-15
PV-200A-1XL-B-15
PV-125A-2XL-B-15
PV-160A-2XL-B-15
PV-200A-2XL-B-15
PV-250A-2XL-B-15
PV-125A-2XL-3B-15*
PV-160A-2XL-3B-15*
PV-200A-2XL-3B-15*
PV-250A-2XL-3B-15*
PV-250A-3L-B-15
PV-315A-3L-B-15
PV-350A-3L-B-15
PV-355A-3L-B-15
PV-400A-3L-B-15
PV-450A-3L-B-15
50
63
80
100
125
160
100
125
160
200
125
160
200
250
125
160
200
250
250
315
350
355
400
450
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
100
100
100
100
100
100
PV-500A-3L-15
PV-500A-3L-B-15
500
100
I2t (A2s)
Total @ rated volts
Watts loss
0.8In
In
1900
3600
6300
13,900
28,100
27,260
21,000
37,000
70,000
123,000
192,000
21,000
37,000
70,000
123,000
192,000
161,200
231,400
442,000
712,400
13
17
18
20
22
31
25
28
34
40
42
25
28
34
40
42
40
48
50
80
24
29
32
40
44
60
44
50
60
66
68
44
50
60
66
68
65
82
85
108
175
362
565
1100
2200
5000
1250
1950
4200
9400
2200
5000
8800
16,600
2200
5000
8800
16,600
74,000
150,000
195,000
195,000
296,000
412,000
1000
2250
3300
6600
10500
24000
6000
9360
20,160
45,120
15,000
32,000
51,000
85,000
15,000
32,000
51,000
85,000
263,000
533,000
693,000
693,000
1,060,000
1,470,000
14
15
19
22
23
26
24
25
30
31
25
29
32
40
25
29
32
40
28
30
34
34
35
39
25
26
35
40
42
52
43
52
58
61
44
48
57
70
44
48
57
70
49
52
59
59
61
67
532,000
1,890,000
42
73
1500 Vdc
01
1
2
3
* These fuses have revised bolting patterns that are identical to size 3L bolting pattern to allow using both size 2XL and size 3L fuses without changing the dimensional
layout of the inverter, combiners and disconnects.
Data sheet no. 10201
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
6-7
PV fuses, holders,
blocks and SPDs
•
6 — Photovoltaic fuses, holders and blocks
CHPV Modular, IP20 finger-safe DIN-Rail holders
for 10x38mm fuses
Features
•
Enhanced safety with IP20 finger-safe construction
Bussmann series CHPV DIN-Rail fuse
holders are for 10x38mm IEC and UL
photovoltaic fuses rated up to 1000
Vdc. They are available with and without
indication in 1- and 2-pole IP20 finger-safe
versions. A variety of accessories extends
their application flexibility and they may
be ganged together to meet specific
application requirements.
•
Wiring flexibility with terminals rated for use with 75°C or 90°C
solid, stranded and fine stranded wire, and spade terminals and
comb busbars. (Use any higher temperature insulations at the
90°C ampacity with appropriate derating.)
•
Complete range of UL Listed and high SCCR rated one- and threephase finger-safe comb busbars and power feed lugs
Ratings
•
Volts 1000 Vdc (or less)
•
Amps 30 A
•
SCCR 33 kA DC
Optional open fuse indicator
Fuse access door
accommodates
4mm lockout/
tagout device
2011/65/EU
IP20 finger-safe
construction
Captive phil-slot
terminal screw
Toolless
ganging for
multiple poles
Agency information
•
UL Listed to 4248-19, Guide IZMR, File E348242
•
CSA, Class 6225-30, File 47235
•
IEC 60269-2
•
CCC
•
RoHS compliant
•
CE
Toolless 35mm
DIN-Rail mounting
Fork lug
connection
Dual conductor
rated box lug
clamp
Wire strip gauge
Mounting 35mm DIN-Rail
Wire range - AWG (mm2)
•
75°C and 90°C* Cu
•
18-4 (0.8-21.1)
•
Solid, stranded, fine stranded
* May be used with higher temperature rated conductors with appropriate
derating.
Gang multiple poles to meet application requirements using kit catalog number
JV-L (gangs up to four poles).
Terminals
•
Single or dual conductors
•
Comb busbar
Torque 30 lb-in (3.4 N•m) maximum
Flammability UL 94V0, self-extinguishing
Storage and operating temperature
•
-4°F (-20°C) to 194°F (90°C) indicating
•
-4°F (-20°C) to 248°F (120°C) non-indicating
Catalog no.
With indication*
Without indication
CHPV1IU
CHPV1U
CHPV2IU
CHPV2U
Volts / amps
Agency marks
1000 Vdc/30 A
UL, CSA, , UL 4248-18, IEC 60269-1, CCC
Poles
1
2
SCCR
33 kA DC
Recommended
Bussmann series fuses
PV-(amp)A10F,
PV10M-(amp)
* All models require 90 V minimum for illumination.
Data sheet no. 10430
6-8
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Photovoltaic fuses, holders, and blocks — 6
Features
BPVM modular blocks for 10x38mm fuses
The Bussmann series BPVM
modular style 1000 Vdc fuse blocks
for use with 10x38mm
(13/32” x 1-1/2”) photovoltaic fuses
up to 30 amps contain multiple
features to add versatility, reduce
labor and enhance safety of any
panel design. Optional IP20 fingersafe covers enhance safety with a
lockout/tagout feature along with
optional open fuse indication to
speed troubleshooting.
Ratings
•
Volts 1000 Vdc
•
Amps 30 A
•
SCCR 33 kA
•
Blocks are fully modular with a snap-together design that provides
tool-less assembly of multiple pole blocks at point-of-use to reduce
inventory and save assembly time and labor
•
DIN-Rail and panel mount versatility allows one product to be used
for multiple applications, lowering inventory cost
•
Compact footprint consumes minimal panel space
•
Optional see-through cover enhances safety with IP20 finger-safe
protection, lockout/tagout capability and open circuit indication
•
Easy circuit identification with available universal marker labels for
fuse block covers
•
Tin-plated bimetallic copper fuse clips deliver superior fatigue
resistance compared to traditional spring brass
•
Listed to UL 4248-18 for photovoltaic application
BPVM-2C with CVRI-CCM covers
Blocks
•
UL Listed, Guide IZMR, File E348242
•
CSA Component Acceptance, Class 6225-01, File 47235
•
RoHS compliant
•
CE
Terminal type
AWG range
Box lug (“CR” Option)
Cu 2-14, Al 2-8
Screw (S)
Cu 10-18
Torque lb-in (N•m)
Cu 2-3 — 50 (5.6)
Cu 4-6 — 45 (5.1)
Cu 8-14 — 35 (4.0)
Al 2-6 — 50 (5.6)
Al 8 — 40 (4.5)
10-18 — 20 (2.3)
Covers
•
Covers are included in the overall UL Listing and CSA
Acceptance
•
IP20 finger-safe
•
RoHS Compliant
Catalog no.
Terminal type
#10-32 Philslot screw
Box lug
BPVM-1S
BPVM-1C
BPVM-2S
BPVM-2C
Poles
•
1-, 2-pole units factory assembled
•
Single-pole units snap together to create desired number of poles
Flammability ratings
•
Blocks — UL 94V0, self-extinguishing
•
Covers — UL 94HB, self-extinguishing
Poles
1
2
Fuse size/class
10x38mm (13/32" x 1-1/2”) gPV and PV
Recommended covers*
Cover part numbers
Indicating
CVRI-CCM
Non indicating
CVR-CCM
* For use with 4 AWG max conductors.
Operating and storage temperature range
•
Blocks -40°C to +120°C
•
Non-Indicating covers -40°C to +120°C
•
Indicating covers -20°C to +90°C*
* Indication requires minimum 90 Vac/dc and closed circuit to illuminate.
Recommended Bussmann series fuses
•
10x38mm PV fuses
•
Fast-acting 600 Vdc PVM fuses
•
Class gPV 1000 Vdc PV fuses
Recommended DIN-Rail end stops
•
Catalog no. BRKT-ND or BRKT-NDSCRW2
Data sheet no. 10265
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
6-9
PV fuses, holders,
blocks and SPDs
•
Available in 1- and 2-pole configurations to meet stocking
requirements
Terminal specifications for 75/90°C Cu and Al wire
Agency information
•
•
2011/65/EU
6 — Photovoltaic fuses, holders and blocks
CHPV15L85 holder for 10x85mm and 14x85mm
fuses
CHPV15L85 fuse holder can be used with 10x85mm and 14x85mm
cylindrical gPV fuses.
The unique design offers a high degree of safety with no possibility
of any accidental contact with live parts during fuse replacement.
When the fuse carrier is extracted, it continues to cover the live
parts.
SD blocks for XL size PV fuses
SD XL PV fuse blocks are available with integral shields specifically
designed to be fitted with Bussmann series XL photovoltaic fuses
(see data sheet 10201).
Ratings
•
Volts 1500 Vdc
•
Amps
Ratings
2011/65/EU
•
Volts 1500 Vdc
•
Amps 32 A (UL and IEC)
•
SCCR 50 kA
•
Impulse withstand Uimp 12 kV
(tested at 18.5 kV)
Agency information
•
250 A
•
400 A
•
630 A
2011/65/EU
Agency information
•
IEC 60269-1
•
UL Listed, File E348242
•
RoHS complaint
•
cULus 4248-1 Edition 1, File E384242
•
cULus 4248-19 Edition 1, File E14853
Poles
•
IEC 60269-1
•
1
•
RoHS compliant
•
Power acceptance
•
Sizes 01XL and 1XL: 56 W
•
Size 2XL: 70 W
•
Size 3L: 96 W
Poles 1
Fuse rated power dissipation
•
Up to 8.5 W max
Protection level
Protection level
•
•
IP20
Storage and operating temperature range
•
Minimum permitted ambient temperature: -40°C (installation only
at temperatures > -5°C). Service conditions as per IEC 61439-1,
maximum pollution degree 3.
•
Box terminal, Cu 4-10mm2 flexible, directly clamped or with wireend ferrules (flexible + wire-end ferrule may not be possible with
maximum cross-section)
To order
•
•
-45°C to 80°C (with fuse derating above 40°C)
Mounting
Panel
UL94 Flammability rating
35mm DIN-Rail
Terminals
•
Operating temperature range
•
Mounting
IP20 with terminal covers and gripping lug cover in place and
shielding of any exposed part of the terminal lugs
•
Block V-2
•
Terminal cover V-0
Catalog no.
SD1XL-S-PV
SD2XL-S-PV
Specify catalog number CHPV15L85
Description
1-pole PV fuse block
SD3L-S-PV
XL fuse size
01XL and 1XL
250
2XL
400
3L
630
Accessory
Features
•
Global accreditation
•
32 amp current rating for UL and IEC
Catalog no.
Description
FEH1500
Fuse extraction handle available for sizes 01XL to 3L
Compatible Bussmann series fuses
•
PV-xA10F85 10x85mm fuses
•
PV-xxA14LF10F 14x85mm fuses
Data sheet no. 10628
6-10
Amps
Data sheet no. 10066
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Photovoltaic fuses, holders, and blocks — 6
SD and TD blocks for NH size PV fuses
Flammability rating
SD PV fuse blocks for NH fuse sizes 1 to 3 NH are available in 1- and
3-pole versions and are specifically designed for use with Bussmann
series bladed NH photovoltaic fuses (see data sheet 720133).
•
UL 94V0
Catalog no.
Poles
Ratings
SD1--D-PV
1
TD1--D-PV
3
Volts
SD2-D-PV
1
TD2-D-PV
3
SD3-D-PV
1
TD3-D-PV
3
•
•
•
1500 Vdc (IEC)
Amps
•
250 A (SD1)
•
400 A (SD2)
•
630 A (SD3)
2011/65/EU
NH PV fuse block
NH fuse size
Amps
1
250
2
400
3
630
Accessories
SCCR 50 kA
Fuse extraction handle
Agency information
Catalog no.
FEH
Size
Amps
NH1 to 3
250 to 630
•
IEC 60269-1
•
UL Listed, File E348242
•
CSA File 47235
Catalog no.*
Fuse block
•
RoHS compliant
SD12-SK
SD1 and TD1
NH1
250
SD12-SK
SD2 and TD2
NH2
400
SD3-SK
SD3 and TD3
NH3
630
Fuse size
Amps
Shroud kits
Poles
•
1 and 3
SD1 - 32 W
•
SD2 - 45 W
•
SD3 - 60 W
Amps
Description
Includes 2
shrouds and 1
fuse cover
* Order one kit per pole.
Shown with optional shroud kit
Power acceptance
•
Fuse size
Protection level
•
IEC - IP20 with shroud kit installed and shielding of any exposed
terminal lugs
•
UL - Installation of shroud kit decreases the likelihood of incidental
terminal contact. To ensure compliance to IP20 specifications per
UL the installer must make additional provisions.
Operating temperature range
•
IEC Standards -20°C to 70°C
•
UL -20°C to 90°C Max*
Phase barrier kits
Catalog no.†
Fuse block
SD12-PB
SD1 and TD1
NH1
250
SD12-PB
SD2 and TD2
NH2
400
SD3-PB
SD3 and TD3
NH3
630
Description
2 phase barriers
and 2 ganging
links
PV fuses, holders,
blocks and SPDs
•
Description
† Order one kit per pole.
Microswitches
Catalog no.
Ratings
BVL50
6 A 250 Vac
170H0236
2 A 250 Vac
170H0238
2 A 250 Vac
Neutral links
* Dependant upon rating of customer supplied lugs.
Catalog no.
Fuse block
Storage temperature range
SDL-1
SD1 and TD1
NH1
250
IEC and UL -40°C to 90°C
SDL-2
SD2 and TD2
NH2
400
SDL-3
SD3 and TD3
NH3
630
•
Fuse size
Amps
Mounting
•
35mm DIN-Rail
•
Panel
Data sheet no. 720149
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
6-11
BUSSMANN
SERIES
Bussmann series products
at your fingertips
We make searching for and selecting Bussmann™ series products easy with four unique product
selector tools:
Surge Protective Device Selector
Low Voltage Fuses Selector
Medium Voltage Fuse Selector
Connector Selector
Each tool allows you to select from available attributes to find the product that best meets your
needs. Results are then displayed with links to product detail webpages for more information.
Quick access to our team of experts for additional assistance is also made available. And with a
responsive design, the tools can be used anytime, anywhere.
Find these selector tools and more at toolbox.bussmann.com.
Follow us on social media to get the
latest product and support information.
Medium voltage fuses — 7
Contents
Section
page
Description
Introduction
2
E-Rated current-limiting
A fusible solution for virtually
every medium voltage
application
2.75 kV
3-4
5.5 kV
5-7
5.5 kV specialty mount
8-10
8.3 kV
11-12
8.3 kV specialty mount
13-14
15.5 kV
15-17
15.5 kV specialty mount
18-19
DIN E-Rated current-limiting — 5.5-38 kV
20-21
R-Rated current-limiting
2.4 kV
22
4.8 kV
23-24
7.2 kV
25
PT E-Rated current-limiting — 2.475-38 kV
26-29
30
British IEC
31
DIN IEC
32
Expulsion fuse links
33
EEI-NEMA Type K and T – Type H and N
34
PT fuse mountings
35
Recommended fuseclips
36
Medium voltage
fuses
PT fast-acting current-limiting
Bussmann series
E-Rated, R-Rated and PT
medium voltage fuses
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-1
7 — Medium voltage fuses
E- and R-Rated fuses
Introduction
Worldwide circuit protection solutions
Eaton is the world-leading supplier of Bussmann series medium
voltage fuses. Each product is backed by an efficient worldwide
distribution network with unrivaled service and technical support.
Eaton circuit protection solutions comply with major international
standards: ANSI, BS, DIN, IEC and UL.
Fuse types
Medium voltage fuses generally fit into two categories – expulsion
fuses and current limiting. The definitions per ANSI C37.40 are:
Expulsion fuse: A vented fuse in which the expulsion effect of the
gases produced by internal arcing, either alone or aided by other
mechanisms results in current interruption. Expulsion fuses will
limit the duration of an overcurrent event, but they will not limit the
magnitude of fault current.
Current-limiting fuse: A fuse unit that, when in its currentresponsive element is melted by a current within the fuse’s
specified current-limiting range, abruptly introduces a high
resistance to reduce current magnitude and duration, resulting in
subsequent current interruption. A current limiting fuse will reduce
the magnitude a fault current as well as limit the duration of the
overcurrent event when operating in its current limiting range.
Eaton offers a broad range of current limiting fuses for protection of
feeders, transformers and motor circuits designed to ANSI, BS, DIN
and IEC standards.
In North America, current limiting fuses typically fall into the
category of E-Rated fuses and R-Rated fuses. Eaton also offers a
wide range of Bussmann series current limiting fuses designed to
BS, DIN and IEC standards.
E-Rated fuses are used to protect feeder circuits, power
transformers and potential transformers. E-Rated fuses have defined
current response times specified by ANSI C37.46. E-Rated fuses
100 amps and below must melt in 300 seconds at an RMS current
within the range of 200 to 240 percent of the continuous current
rating. E-Rated fuses above 100 amps must melt in 600 seconds
at an RMS current within the range of 220 to 264 percent of the
continuous current rating of the fuse. Eaton offers a wide variety of
full range and general purpose E-Rated fuses from 2.4 to 38 kV.
R-Rated fuses are back-up fuses that provide short-circuit protection
for motor circuits. They are applied with medium voltage motor
starters which provide the overload protection for the circuit. R-Rated
fuses also have defined current response times specified by ANSI
C37.46. R-Rated fuses will melt in a range of 15 to 35 seconds at a
current equal to 100 times the “R” rating. Bussmann series R-Rated
fuses for motor circuit protection are available in voltage ratings from
2.4 to 8.3 kV
Medium voltage current-limiting fuses
Current-limiting fuses are classified into three categories:
1. Full range – defined by ANSI C37.40 as “a fuse capable of
interrupting all currents from the maximum rated interrupting
current down to the minimum continuous current that causes the
melting of the fusible element(s), when the fuse is applied at the
maximum ambient temperature specified by the manufacturer.” It
is able to interrupt any current that will melt its element.
2. General purpose – defined by ANSI C37.40 as “a fuse capable
of interrupting all currents from the maximum rated interrupting
current down to the current that causes melting of the fusible
element(s) in one hour.” Not all currents fall within this range. It is
possible for the fuse to be exposed to an overcurrent lower than
the value given by the one hour criteria. In that case, a different
overcurrent protection device would be required to interrupt the
overcurrent.
3. Back-up – defined by ANSI C37.40 as “a fuse capable of
interrupting all currents from the maximum interrupting rating
current down to the minimum interrupting current.” The minimum
interrupting current is the lowest current that the fuse will be
able to clear properly. This creates a need to place a low current
interrupting device, such as motor overloads, in series with the
back-up rated fuse.
7-2
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
2.75 kV E-Rated medium voltage ferrule fuses
Dimensions — in (mm)
Catalog symbols
•
2CLE-_E
•
JCX-_E
C
B
Ratings
•
Volts 2.75 kV
•
Amps 10 to 450 A
•
Interrupting ratings
•
50 kA RMS Sym. (2CLE-_E)
•
40 kA RMS Sym. (JCX-_E)
3.31
(84.1)
B
A
Agency information
E-Rated fuses meet the performance characteristics of ANSI
C37.46
•
Recommended CLE fuse holders
Approx. dimensions — in (mm)
Amps
CLE
15E–25E
Single barrel
10E–225E
Single barrel
250E–300E
350X-450X
Double barrel
Fuse mounting
type
Non-disconnect
Disconnect†
Non-disconnect
Disconnect†
Non-disconnect
BIL
(kV)
Diameter A Clip center B
Length C
2 (51)
8.1 (206)
9.5 (241)
3 (76)
7 (178)
10.9 (277)
60
Disconnect
†
Catalog no.
Mounting*
Porcelain
insulator
Glass-polyester
insulator
Live parts
(with end
fittings)
End fittings
(disconnect
only)
2CLE-PNM-C
2CLE-PDM-C
2CLE-PNM-D
2CLE-PDM-D
2CLE-PNM-E
2CLE-GNM-C
2CLE-GDM-C
2CLE-GNM-D
2CLE-GDM-D
2CLE-GNM-E
CLE-NL-C
CLE-DL-C
CLE-NL-D
CLE-DL-D
CLE-NL-E
—
CLE-DF-C
—
CLE-DF-D
—
2CLE-PDM-E
2CLE-GDM-E
CLE-DL-E
CLE-DF-E
* Includes live parts and end fittings, end fittings supplied only when required.
† Disconnect mountings provide a means for fuse extraction only. Do not use a
disconnect mounting for load switching or fuse removal while energized.
Recommended fuseclips
Fuse dia. — in (mm)
2 (51)
Enclosed fuseclip
Open fuseclip
Spring loaded open fuseclip
3 (76)
Catalog no.
A3354710*
A3354730*
1A0065
9078A67G04
Medium voltage
fuses
Description
* For single barrel applications only. Not sold in pairs.
Data sheet no. 10350
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-3
7 — Medium voltage fuses
CLE and JCX
Amps
Dimensions — in (mm)
Length A
Diameter B
Clip centers C
IR RMS Sym. (kA)
No. of barrels
Installation location
Catalog no.
1
JCX-1E
2
3
5
7
10
10
15
20
25
30
40
50
65
80
100
125
150
200
225
250*
300*
350**
400**
450**
JCX-2E
JCX-3E
JCX-5E
JCX-7E
JCX-10E
2CLE-10E
2CLE-15E
2CLE-20E
2CLE-25E
2CLE-30E
2CLE-40E
2CLE-50E
2CLE-65E
2CLE-80E
2CLE-100E
2CLE-125E
2CLE-150E
2CLE-200E
2CLE-225E
2CLE-250E
2CLE-300E
2CLE-350X
2CLE-400X
2CLE-450X
9.2 (234)
2 (51)
10.9 (277)
3 (76)
9.5 (241)
2 (51)
7 (178)
40
Indoor/outdoor
8.1 (206)
1
50
10.9 (277)
3 (76)
Indoor
7 (178)
2
* 250 and 300 amp ratings may also be applied at 280 and 325 amps respectively, but fuses will no longer be complaint with ANSI E rating criteria.
** Does not comply with ANSI C37.46 for “E” rating.
Data sheet no. 10350
7-4
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
5.5 kV E-Rated medium voltage ferrule fuses
Dimensions — in (mm)
C
Catalog symbols
General purpose
•
•
5CLE-_E-D (10-25 A)
•
5CLE-_E (10-1350 A)
•
5HLE-_E (10-450 A)
•
JCY-_E (1-25 A)
B
3.31
(84.1)
Full range (per ANSI C37.40)
•
•
MV055F_ (10-450 A)
B
Ratings*
A
•
Volts 5.5 kV
•
Amps 1 to 1350 A
•
Interrupting ratings 40 to 63 kA RMS Sym.
* See catalog number tables for voltages, ampacities and interrupting ratings by
catalog number.
Agency information
•
E-Rated fuses meet the performance characteristics of ANSI
C37.46
•
UL Listed, Guide JEEG, File E240398. See catalog numbers.
Recommended fuseclips
Description
Fuse dia. — in (mm)
2 (51)
Enclosed fuseclip
Open fuseclip
Spring loaded open fuseclip
3 (76)
Catalog no.
A3354710*
A3354730*
1A0065
9078A67G04
* For single barrel applications only. Not sold in pairs.
Amps
CLE
10E-D–25E-D
30E–250E
Single barrel
15E–25E
Single barrel
300E–450E
Double barrel
Fuse mounting
type
Approx. Dimensions — in (mm)
BIL Diameter Clip center
(kV)
A
B
Length C
Non-disconnect
3.0 (76.2) 14.0 (355.6) 17.9 (454.7)
Disconnect
†
Non-disconnect
Disconnect†
Non-disconnect
Disconnect†
600E and 750E Consult factory
Double barrel
1100E and
1350E
Consult factory
Four barrel
HLE
Non-disconnect
10E-D–250E
Single barrel
Disconnect
Non-disconnect
300E–450E
Double barrel
Disconnect
60
Catalog no.
Mounting*
Porcelain
insulator
Glass-polyester
insulator
Live parts
(with end
fittings)
End fittings
(disconnect
only)
5CLE-PNM-D
5CLE-GNM-D
CLE-NL-D
—
5CLE-PDM-D
5CLE-GDM-D
CLE-DL-D
CLE-DF-D
5CLE-PNM-C
2.0 (50.8) 11.5 (292.1) 12.9 (327.7)
5CLE-PDM-C
5CLE-PNM-E
3.0 (76.2) 14.0 (355.6) 17.9 (454.7)
5CLE-PDM-E
5CLE-GNM-C
5CLE-GDM-C
5CLE-GNM-E
5CLE-GDM-E
CLE-NL-C
CLE-DL-C
CLE-NL-E
CLE-DL-E
—
CLE-DF-C
—
CLE-DF-E
4.0 (101.6)
—
—
—
5HLE-GNM-D
5HLE-GDM-D
5HLE-GNM-E
5HLE-GDM-E
CLE-NL-D
CLE-DL-D
CLE-NL-E
CLE-DL-E
—
CLE-DF-D
—
CLE-DF-E
N/A
N/A
—
—
60
5HLE-PNM-D
5HLE-PDM-D
3.0 (76.2) 12.0 (304.8) 15.9 (403.9)
5HLE-PNM-E
5HLE-PDM-E
* Including live parts and end fittings, end fittings supplied only when required.
† Disconnect mountings provide a means for fuse extraction only. Do not use a
disconnect mounting for load switching or fuse removal while energized.
Data sheet no. 10351
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-5
Medium voltage
fuses
Recommended CLE and HLE holders
7 — Medium voltage fuses
CLE, HLE and JCY general purpose
Amps
1
2
3
5
7
10
10
10
15
15
15
15
20
20
20
20
25
25
25
25
30
30
40
40
50
50
65
65
80
80
100
100
125
125
150
150
175
175
200
200
250
250
300
300
350
350
400
400
450
450
Dimensions — in (mm)
Length A
Diameter B
11.2 (284)
2 (51)
Clip centers C
IR RMS Sym.
(kA)
9 (229)
40
No. of barrels
Installation
location
Indoor/outdoor
17.9 (455)
15.9 (404)
11.2 (284)
12.9 (328)
17.9 (455)
15.9 (404)
11.2 (284)
12.9 (328)
17.9 (455)
15.9 (404)
11.2 (284)
12.9 (328)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
17.9 (455)
15.9 (404)
3 (76)
2 (51)
3 (76)
2 (51)
3 (76)
2 (51)
2 (51)
3 (76)
14 (356)
12 (305)
9 (229)
11.5 (292)
14 (356)
12 (305)
9 (229)
11.5 (292)
14 (356)
12 (305)
9 (229)
11.5 (292)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
14 (356)
12 (305)
63
40
50
Indoor
63
Indoor/outdoor
40
50
Indoor
63
Indoor/outdoor
40
50
Indoor
63
1
Indoor/outdoor
65
2
Catalog no.
JCY-1E
JCY-2E
JCY-3E
JCY-5E
JCY-7E
JCY-10E
5CLE-10E-D
5HLE-10E
JCY-15E
5CLE-15E*
5CLE-15E-D
5HLE-15E
JCY-20E
5CLE-20E*
5CLE-20E-D
5HLE-20E
JCY-25E
5CLE-25E*
5CLE-25E-D
5HLE-25E
5CLE-30E
5HLE-30E
5CLE-40E†
5HLE-40E†
5CLE-50E†
5HLE-50E†
5CLE-65E†
5HLE-65E†
5CLE-80E†
5HLE-80E†
5CLE-100E†
5HLE-100E†
5CLE-125E†
5HLE-125E†
5CLE-150E†
5HLE-150E†
5CLE-175E†
5HLE-175E†
5CLE-200E†
5HLE-200E†
5CLE-250E†
5HLE-250E†
5CLE-300E†
5HLE-300E†
5CLE-350E†
5HLE-350E†
5CLE-400E†
5HLE-400E†
5CLE-450E†
5HLE-450E†
* Fuses conform to dimensional standards established by Westinghouse.
† UL Listed, Guide JEEG, File E240398.
Data sheet no. 10351
7-6
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
MV055 full range
Amps
5
7
10
10
15
15
20
20
25
25
30
30
40
40
50
50
65
65
80
100
125
150
175
200
250
300
350
400
450
Dimensions — in (mm)
Length A
Diameter B
Clip centers C IR RMS Sym. (kA)
No. of Barrels
Installation location
2 (51)
15.7 (399)
3 (76)
2 (51)
3 (76)
2 (51)
3 (76)
2 (51)
3 (76)
2 (51)
3 (76)
2 (51)
3 (76)
2 (51)
3 (76)
2 (51)
1
12 (305)
50
Indoor
3 (76)
2
Catalog no.
MV055F1CAX5E
MV055F1CAX7E
MV055F1CAX10E
MV055F1DAX10E
MV055F1CAX15E
MV055F1DAX15E
MV055F1CAX20E
MV055F1DAX20E
MV055F1CAX25E
MV055F1DAX25E
MV055F1CAX30E
MV055F1DAX30E
MV055F1CAX40E
MV055F1DAX40E
MV055F1CAX50E
MV055F1DAX50E
MV055F1CAX65E
MV055F1DAX65E
MV055F1DAX80E
MV055F1DAX100E
MV055F1DAX125E
MV055F1DAX150E
MV055F1DAX175E
MV055F1DAX200E
MV055F2DAX250E
MV055F2DAX300E
MV055F2DAX350E
MV055F2DAX400E
MV055F2DAX450E
Recommended MV055 fuseclips
Fuse dia. — in (mm)
2 (51)
Enclosed fuseclip
Open fuseclip
Spring loaded open fuseclip
3 (76)
Catalog no.
A3354710*
A3354730*
1A0065
9078A67G04
Medium voltage
fuses
Description
* For single barrel applications only. Not sold in pairs.
Data sheet no. 10351
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-7
7 — Medium voltage
fuses
A
X.XX (XX.X)
HCL clip-lock
5.5B kV E-Rated medium voltage specialty mount
fuses
0.44 x 0.91
(11.2 x 23.1)
Catalog symbols
Slots
A
0.44 (11.2) Dia. Hole
•
5AHLE-_E (for EatonCAMPGARD motor starting assemblies)
•
•
5BHLE-_E / 5BHCL-_E (bolt-on version)
4.31 (109.5)
5CLE-_E
•
5HCL-_E (clip-lock version)
0.5 (12.7)
Volts 5.5 kV
•
Amps 10 to 900 A
•
Interrupting ratings 31 to 63 kA RMS Sym.
0.25
(6.4)
4.31 (109.5)
Ratings*
•
Indicator
1.25
1.25
(31.8)
(31.8)
B
7.94 (201.7)
7.94 (201.7)
* See catalog number tables for voltages, ampacities
and interrupting ratings by
catalog number.
Agency information
•
0.5 (12.7)
E-Rated fuses meet the performance characteristics
of ANSI
C37.46
Recommended live parts for clip-lock fuses
11.62 (295.1)
•
Catalog number HCL-NL-1
11.62 (295.1)
0.38
(9.7)
Dimensions — in (mm)
BHLE bolt-on
Indicator
2.12
(53.8)
* Flush with surface in untripped position, trip force is 2 lb (0.9kg)
3.00
(76.2)
CLE four-barrel bolt-on
16.0
C
B
A
10.18
Indicator to be
located here
1.19
3.31
(84.1)
20.0
B
2.12
(53.8)
C
A
Indicator to be
located here
3.31
(84.1)
Note: 1100E and 1350E fuses require two double barrel fuses (4
total barrels) customer to parallel.
3.31
(84.1)
B
2.12
(53.8)
C
A
Data sheet no. 10351
7-8
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
AHLE for Eaton AMPGARD motor starting assemblies
Amps
10
15
20
25
30
40
50
65
80
100
125
150
175
200
250
300
350
400
450
IR RMS Sym. (kA)
No. of barrels
Catalog no.
5AHLE-10E
5AHLE-15E
5AHLE-20E
5AHLE-25E
5AHLE-30E
5AHLE-40E†
5AHLE-50E†
5AHLE-65E†
5AHLE-80E†
5AHLE-100E†
5AHLE-125E†
5AHLE-150E†
5AHLE-175E†
5AHLE-200E†
5AHLE-250E†
5AHLE-300E†
5AHLE-350E†
5AHLE-400E†
5AHLE-450E†
1
65
2
† UL Listed, Guide JEEG, File E240398.
Amps
10
15
20
25
30
40
50
65
80
100
125
150
200
250
300
400
450
500
600
Dimensions — in (mm)
Length A
Diameter B
Hole centers C
IR RMS Sym.
(kA)
No. of barrels
Installation
location
16.8 (427)
1
3 (76)
N/A
65
Indoor
22.8 (579)
2
Catalog no.
5HCL-10E
5HCL-15E
5HCL-20E
5HCL-25E
5HCL-30E
5HCL-40E†
5HCL-50E†
5HCL-65E†
5HCL-80E†
5HCL-100E†
5HCL-125E†
5HCL-150E†
5HCL-200E†
5HCL-250E†
5HCL-300E†
5HCL-400E†
5HCL-450E†
5HCL-500E
5HCL-600E
† UL Listed, Guide JEEG, File E240398.
Data sheet no. 10351
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-9
Medium voltage
fuses
HCL clip-lock versions
7 — Medium voltage fuses
CLE, BHLE and BHCL bolt-on versions
Amps
10
15
20
25
30
40
50
65
80
100
125
150
175
200
200
250
250
300
300
350
400
400
450
450
500
600
600
750
750
900
1100
1350
Dimensions — in (mm)
Length A
Diameter B
19.2 (488)
Hole centers C
IR RMS Sym.
(kA)
No. of barrels
Installation
location
17.9 (455)
1
3 (76)
65
25.1 (637)
19.2 (488)
25.1 (637)
19.2 (488)
25.1 (637)
23.7 (602)
17.9 (455)
23.7 (602)
17.9 (455)
23.7 (602)
19.2 (488)
17.9 (455)
25.1 (637)
19.2 (488)
23.7 (602)
17.9 (455)
25.1 (637)
23.7 (602)
28.9
25.1
28.9
25.1
Indoor
2
(734)
(637)
(734)
(637)
4 (102)
3 (76)
4 (102)
3 (76)
18.4 (467)
23.7 (602)
18.4 (467)
23.7 (602)
40
63
40
63
3
2
3
19.8 (503)
4 (102)
18.4 (467)
31
4
Catalog no.
5BHLE-10E
5BHLE-15E
5BHLE-20E
5BHLE-25E
5BHLE-30E
5BHLE-40E†
5BHLE-50E†
5BHLE-65E†
5BHLE-80E†
5BHLE-100E†
5BHLE-125E†
5BHLE-150E†
5BHLE-175E†
5BHLE-200E†
5BHCL-200E
5BHLE-250E†
5BHCL-250E
5BHLE-300E†
5BHCL-300E
5BHLE-350E†
5BHLE-400E†
5BHCL-400E
5BHLE-450E†
5BHCL-450E
5BHCL-500E
5BHCL-600E
5CLE-600E
5BHCL-750E
5CLE-750E
5BHCL-900E
5CLE-1100E
5CLE-1350E
† UL Listed, Guide JEEG, File E240398.
Data sheet no. 10351
7-10
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
8.3 kV E-Rated medium voltage ferrule fuses
Dimensions — in (mm)
Catalog symbols
•
8CLE-_E-D (10-25 A)
•
8CLE-_E (10-350 A)
•
8HLE-_E (10-350 A)
C
B
Ratings*
•
Volts 8.3 kV
•
Amps 10 to 350 A
•
IR 50 kA RMS Sym.
3.31
(84.1)
B
* See catalog number tables for voltages, ampacities and interrupting ratings by
catalog number.
A
Agency information
E-Rated fuses meet the performance characteristics of ANSI
C37.46
•
Recommended fuseclips
Description
Fuse dia. — in (mm)
2 (51)
Enclosed fuseclip
Open fuseclip
Spring loaded open fuseclip
3 (76)
Catalog no.
A3354710*
A3354730*
1A0065
9078A67G04
* For single barrel applications only. Not sold in pairs.
Catalog no.
Mounting*
Porcelain
insulator
Live parts
Glass-polyester (with end
insulator
fittings)
End fittings
(disconnect
only)
8CLE-PNM-D
8CLE-GNM-D
CLE-NL-D
—
8CLE-PDM-D
8CLE-GDM-D
CLE-DL-D
CLE-DF-D
8CLE-PNM-C
15.5 (394)
8CLE-PDM-C
8CLE-PNM-E
17.9 (455)
8CLE-PDM-E
8CLE-GNM-C
8CLE-GDM-C
8CLE-GNM-E
8CLE-GDM-E
CLE-NL-C
CLE-DL-C
CLE-NL-E
CLE-DL-E
—
CLE-DF-C
—
CLE-DF-E
8HLE-PNM-D
8HLE-PDM-D
15.9 (404)
8HLE-PNM-E
8HLE-PDM-E
8HLE-GNM-D
8HLE-GDM-D
8HLE-GNM-E
8HLE-GDM-E
CLE-NL-D
CLE-DL-D
CLE-NL-E
CLE-DL-E
—
CLE-DF-D
—
CLE-DF-E
Approx. dimensions — in (mm)
Amps
CLE
10E-D–25E-D
30E–175E
Single barrel
Fuse mounting
type
Non-disconnect
Disconnect
3.0 (76)
†
Non-disconnect
Disconnect†
Non-disconnect
200E–350E
Double barrel Disconnect
HLE
Non-disconnect
10E-175E
Single barrel Disconnect†
Non-disconnect
200E–350E
Double barrel Disconnect†
15E–25E
Single Barrel
BIL
(kV) Diameter A Clip center B
75
2.0 (51)
17.9 (455)
14 (356)
3.0 (76)
75
3.0 (76)
Length C
12 (305)
* Including live parts and end fittings, end fittings supplied only when required.
† Disconnect mountings provide a means for fuse extraction only. Do not use a
disconnect mounting for load switching or fuse removal while energized.
Data sheet no. 10352
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-11
Medium voltage
fuses
Recommended fuse holders
7 — Medium voltage fuses
CLE and HLE Type fuses
Dimensions — in (mm)
Amps
Length A
Diameter B
Clip centers C
IR RMS Sym. (kA)
No. of barrels
Installation
location
Catalog no.
CLE Long construction (Westinghouse)
10
17.9 (455)
15
15.5 (394)
15
17.9 (455)
20
15.5 (394)
20
17.9 (455)
25
15.5 (394)
25
30
40
50
65
80
100
17.9 (455)
125
150
175
200
250
300
350
HLE Short construction
10
15
20
25
30
40
50
65
80
15.9 (404)
100
125
150
175
200
250
300
350
3 (76)
2 (51)
3 (76)
2 (51)
3 (76)
2 (51)
Indoor/outdoor
Indoor
Indoor/outdoor
Indoor
Indoor/outdoor
Indoor
1
14 (356)
50
3 (76)
Indoor/outdoor
2
1
3 (76)
12 (305)
50
Indoor/outdoor
2
8CLE-10E-D
8CLE-15E*
8CLE-15E-D
8CLE-20E*
8CLE-20E-D
8CLE-25E*
8CLE-25E-D
8CLE-30E
8CLE-40E
8CLE-50E
8CLE-65E
8CLE-80E
8CLE-100E
8CLE-125E
8CLE-150E
8CLE-175E
8CLE-200E
8CLE-250E
8CLE-300E
8CLE-350E
8HLE-10E
8HLE-15E
8HLE-20E
8HLE-25E
8HLE-30E
8HLE-40E
8HLE-50E
8HLE-65E
8HLE-80E
8HLE-100E
8HLE-125E
8HLE-150E
8HLE-175E
8HLE-200E
8HLE-250E
8HLE-300E
8HLE-350E
* Fuses conform to dimensional standards established by Westinghouse.
Data sheet no. 10352
7-12
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
8.3 kV E-Rated medium voltage specialty mount
fuses
Catalog symbols
•
8AHLE-_E (special dimension fuses for use with 7.2 kV rated,
800 amp AMPGARD motor starting assemblies)
•
8BHLE-_E (bolt-on version)
•
8HCL-_E (clip-lock version)
Ratings*
•
Volts 8.3 kV
•
Amps 10 to 350 A
•
Interrupting rating 50 kA RMS Sym.
* See catalog number tables for voltages, ampacities and interrupting ratings by
catalog number.
Agency information
•
E-Rated fuses meet the performance characteristics of ANSI
C37.46
Recommended live parts for clip-lock fuses
Catalog number HCL-NL-1
Dimensions for BHLE — in (mm)
A
Dimensions for HCL — in (mm)
X.XX (XX.X)
2.12
(53.8)
B
0.44 x 0.91
(11.2 x 23.1)
Slots
C
B
A
0.44 (11.2) Dia. Hole
Indicator
0.5 (12.7)
C
A
0.25
(6.4)
4.31 (109.5)
4.31 (109.5)
Indicator to be
located here
1.25
1.25
(31.8)
(31.8)
B
Medium voltage
fuses
•
3.31
(84.1)
7.94 (201.7)
7.94 (201.7)
B
C
2.12
(53.8)
A
0.5 (12.7)
11.62 (295.1)
Indicator to be
located here
0.38
11.62 (295.1)
(9.7)
3.31
(84.1)
3.00
Indicator
3.31
(84.1)
(76.2)
* Flush with surface in untripped position, trip force is 2 lb (0.9kg)
B
2.12
(53.8)
C
A
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 10352
Eaton.com/bussmannseries
7-13
7 — Medium voltage fuses
AHLE Type fuses
Special dimension fuses for use with 7.2 kV rated, 800 amp AMPGARD motor starting assemblies.
Amps
10
15
20
25
30
40
50
65
80
100
125
150
175
200
250
300
350
IR RMS Sym. (kA)
No. of barrels
Catalog no.
8AHLE-10E
8AHLE-15E
8AHLE-20E
8AHLE-25E
8AHLE-30E
8AHLE-40E
8AHLE-50E
8AHLE-65E
8AHLE-80E
8AHLE-100E
8AHLE-125E
8AHLE-150E
8AHLE-175E
8AHLE-200E
8AHLE-250E
8AHLE-300E
8AHLE-350E
1
50
2
BHLE bolt-on versions
Amps
10
15
20
25
30
40
50
65
80
100
125
150
175
200
250
300
350
Dimensions — in (mm)
Overall length
Diameter
Hole centers
IR RMS Sym.
(kA)
No. of barrels
Installation
location
1
19.25 (488.9)
3 (76.2)
17.88 (454.2)
50
Indoor
2
Catalog no.
8BHLE-10E
8BHLE-15E
8BHLE-20E
8BHLE-25E
8BHLE-30E
8BHLE-40E
8BHLE-50E
8BHLE-65E
8BHLE-80E
8BHLE-100E
8BHLE-125E
8BHLE-150E
8BHLE-175E
8BHLE-200E
8BHLE-250E
8BHLE-300E
8BHLE-350E
HCL Clip lock versions
Amps
65
80
100
125
150
Dimensions — in (mm)
Overall length
Diameter
IR RMS Sym. (kA)
No. of barrels
Installation
location
1
22.5 (571.5)
175
200
250
300
350
Hole centers
3 (76.2)
N/A
50
Indoor/outdoor
2
Data sheet no. 10352
7-14
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Catalog no.
8HCL-65E
8HCL-80E
8HCL-100E
8HCL-125E
8HCL-150E
8HCL-175E
8HCL-200E
8HCL-250E
8HCL-300E
8HCL-350E
Medium voltage fuses — 7
15.5 kV E-Rated medium voltage ferrule fuses
Catalog symbols
•
General purpose
B
•
15CLE-_E-D (long construction, 10-25 A)
•
15CLE-_E (long construction, 15-300 A)
•
15HLE-_E (short construction, 10-250 A)
•
15LHLE-_E (intermediate construction, 65-300 A)
Full range (per ANSI C37.40)
•
3.31
(84.1)
MV155F_
B
Ratings*
A
•
Volts 15.5 kV
•
Amps 10 to 300 A
•
Interrupting ratings 31.5 to 63 kA RMS Sym.
Dimensions — in (mm)
* See catalog number tables for voltages, ampacities and interrupting ratings by
catalog number.
Recommended fuseclips
Description
Agency information
•
E-Rated fuses meet the performance characteristics of ANSI
C37.46
•
UL Listed, Guide JEEG, File E240398. See catalog numbers.
Enclosed fuseclip
Open fuseclip
Spring loaded open fuseclip
Recommended fuse holders
Amps
CLE
15E–25E
Single barrel
Non-disconnect
Disconnect†
10E-D–25E-D Non-disconnect
30E–150E
Single barrel Disconnect†
Non-disconnect
175E–300E
Double barrel Disconnect†
HLE
Non-disconnect
10E-125E
Single barrel Disconnect†
Non-disconnect
150E–250E
Double barrel Disconnect†
LHLE
Non-disconnect
65E–150E
Single barrel Disconnect†
175E–300E
Double barrel
Non-disconnect
Disconnect†
3 (76)
Catalog no.
A3354710*
A3354730*
1A0065
9078A67G04
* For single barrel applications only. Not sold in pairs.
Approx. dimensions — in (mm)
Fuse mounting
type
Fuse dia. — in (mm)
2 (51)
BIL
(kV) Diameter
95
110
95
110
95
110
95
110
110
110
95
95
95
95
—
—
—
—
Clip center
2 (51)
Length
21.5 (546)
20 (508)
3 (76)
3 (76)
3 (76)
23.9 (607)
15 (381)
18 (457)
18.9 (480)
Catalog no.
Mounting*
Live parts
Glass-polyester (with end
Porcelain insulator insulator
fittings)
End fittings
(disconnect
only)
15CLE-PNM-C
15CLE-HPNM-C
15CLE-PDM-C
15CLE-HPDM-C
15CLE-PNM-D
15CLE-HPM-D
15CLE-PDM-D
15CLE-HPDM-D
15CLE-PNM-E
15CLE-PDM-E
15CLE-GNM-C
—
15CLE-GDM-C
—
15CLE-GNM-D
—
15CLE-GDM-D
—
—
—
CLE-NL-C
CLE-NL-C
CLE-DL-C
CLE-DL-C
CLE-NL-D
CLE-NL-D
CLE-DL-D
CLE-DL-D
CLE-NL-E
CLE-DL-E
—
—
CLE-DF-C
CLE-DF-C
—
—
CLE-DF-D
CLE-DF-D
—
CLE-DF-E
15HLE-PNM-D
15HLE-PDM-D
15HLE-PNM-E
15HLE-PDM-E
15HLE-GNM-D
15HLE-GDM-D
—
—
CLE-NL-D
CLE-DL-D
CLE-NL-E
CLE-DL-E
—
CLE-DF-D
—
CLE-DF-E
CLE-NL-D
—
CLE-DL-D
CLE-DF-D
—
CLE-DF-E
20.53 (521) Not available
Not available
CLE-NL-E
CLE-DL-E
* Including live parts and end fittings, end fittings supplied only when required.
† Disconnect mountings provide a means for fuse extraction only. Do not use a
disconnect mounting for load switching or fuse removal while energized.
Data sheet no. 10353
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-15
Medium voltage
fuses
•
C
7 — Medium voltage fuses
CLE, HLE and LHLE Type general purpose fuses
Dimensions — in (mm)
Amps
Length A
Diameter B
CLE Long construction
10
23.9 (607)
3 (76)
15
21.5 (546)
2 (51)
15
23.9 (607)
3 (76)
20
21.5 (546)
2 (51)
20
23.9 (607)
3 (76)
25
21.5 (546)
2 (51)
25
30
40
50
65
80
100
23.9 (607)
3 (76)
125
150
175
200
250
300
HLE Short construction
10
15
20
25
30
40
50
65
18.9 (480)
3 (76)
80
100
125
150
175
200
250
LHLE
65
80
100
125
150
20.5 (521)
3 (76)
175
200
250
300
Clip centers C
IR RMS Sym.
(kA)
No. of barrels
63
31.5
63
31.5
63
31.5
Installation
location
Indoor/outdoor
Indoor
Indoor/outdoor
Indoor
Indoor/outdoor
Indoor
1
20 (508)
63
Indoor/outdoor
2
63
Indoor/outdoor
Indoor/outdoor
15LHLE-65E
15LHLE-80E
15LHLE-100E
15LHLE-125E
15LHLE-150E
15LHLE-175E
15LHLE-200E
15LHLE-250E
15LHLE-300E
2
1
18 (457)
50
2
15CLE-10E-D
15CLE-15E*
15CLE-15E-D
15CLE-20E*
15CLE-20E-D
15CLE-25E*
15CLE-25E-D
15CLE-30E
15CLE-40E†
15CLE-50E†
15CLE-65E†
15CLE-80E†
15CLE-100E†
15CLE-125E†
15CLE-150E†
15CLE-175E†
15CLE-200E†
15CLE-250E†
15CLE-300E†
15HLE-10E
15HLE-15E
15HLE-20E
15HLE-25E
15HLE-30E
15HLE-40E†
15HLE-50E†
15HLE-65E†
15HLE-80E†
15HLE-100E†
15HLE-125E†
15HLE-150E†
15HLE-175E†
15HLE-200E†
15HLE-250E†
1
15 (381)
Catalog no.
* Fuses conform to dimensional standards established by Westinghouse.
† UL Listed, Guide JEEG, File E240398.
Data sheet no. 10353
7-16
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
MV155F_ Full range
Dimensions — in (mm)
Length A
Diameter B
Clip centers C
IR RMS Sym.
(kA)
No. of barrels
Installation
location
21.7 (551)
18.7 (475)
18 (457)
15 (381)
Catalog no.
MV155F1CBX5E
MV155F1CBX7E
MV155F1CBX10E
MV155F1DBX10E
MV155F1CBX15E
MV155F1DBX15E
MV155F1CBX20E
MV155F1DBX20E
MV155F1CBX25E
MV155F1DBX25E
MV155F1CBX30E
MV155F1DBX30E
MV155F1DBX40E
MV155F1DBX50E
MV155F1DBX65E
MV155F1DCX65E
MV155F1DBX80E
80
21.7 (551)
18 (457)
MV155F1DCX80E
100
100
125
125
150
150
175
175
200
200
18.7 (475)
21.7 (551)
18.7 (475)
21.7 (551)
18.7 (475)
21.7 (551)
18.7 (475)
21.7 (551)
18.7 (475)
21.7 (551)
15 (381)
18 (457)
15 (381)
18 (457)
15 (381)
18 (457)
15 (381)
18 (457)
15 (381)
18 (457)
MV155F1DBX100E
MV155F1DCX100E
MV155F2DBX125E
MV155F2DCX125E
MV155F2DBX150E
MV155F2DCX150E
MV155F2DBX175E
MV155F2DCX175E
MV155F2DBX200E
MV155F2DCX200E
2 (51)
18.7 (475)
3 (76)
2 (51)
3 (76)
2 (51)
3 (76)
2 (51)
3 (76)
2 (51)
15 (381)
1
50
3 (76)
Indoor
2
Medium voltage
fuses
Amps
5
7
10
10
15
15
20
20
25
25
30
30
40
50
65
65
80
Data sheet no. 10353
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-17
7 — Medium voltage fuses
15.5 kV E-Rated medium voltage specialty mount
fuses
Catalog symbols
•
15BHLE-_E (bolt-on version)
•
15HCL-_E (clip-lock version)
Ratings*
•
Volts 15.5 kV
•
Amps 10 to 300 A
•
Interrupting ratings 50 to 63 kA RMS Sym.
* See catalog number tables for voltages, ampacities and interrupting ratings by
catalog number.
Agency information
•
E-Rated fuses meet the performance characteristics of ANSI
C37.46
Recommended live parts for clip-lock fuses
•
Catalog number HCL-NL-1
Dimensions — in (mm)
X.XX (XX.X)
A
BHLE
B
HCL
2.12
(53.8)
0.44 x 0.91
(11.2 x 23.1)
Slots
Indicator
0.5 (12.7)
C
B
A
0.44 (11.2) Dia. Hole
0.25
C
A
4.31 (109.5)
4.31 (109.5)
Indicator to be
located here
1.25
1.25
(31.8)
(31.8)
B
3.31
(84.1)
7.94 (201.7)
7.94 (201.7)
B
C
2.12
(53.8)
A
0.5 (12.7)
11.62 (295.1)
Indicator to be
located here
0.38
11.62 (295.1)
(9.7)
3.31
(84.1)
3.00
Indicator
3.31
(84.1)
(76.2)
* Flush with surface in untripped position, trip force is 2 lb (0.9kg)
B
2.12
(53.8)
C
A
Data sheet no. 10353
7-18
(6.4)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
BHCL, BHLE and HCL Type fuses
Dimensions — in (mm)
Amps
Length A
BHCL and BHLE bolt-on
10
15
20
25
30
40
50
65
22.2 (563)
80
100
125
150
175
200
250
300
25.1 (637)
400
HCL clip-lock
Diameter B
Hole centers C
IR RMS Sym.
(kA)
No. of barrels
Installation
location
Catalog no.
1
20.9 (531)
63
Indoor/outdoor
3 (76)
2
23.7 (602)
50
3
Indoor
Indoor
15BHLE-10E
15BHLE-15E
15BHLE-20E
15BHLE-25E
15BHLE-30E
15BHLE-40E†
15BHLE-50E†
15BHLE-65E†
15BHLE-80E†
15BHLE-100E†
15BHLE-125E†
15BHLE-150E†
15BHLE-175E†
15BHLE-200E†
15BHLE-250E†
15BHCL-300E
15BHCL-400E
10
15HCL-10E
15
20
25
30
40
50
15HCL-15E
15HCL-20E
15HCL-25E
15HCL-30E
15HCL-40E†
15HCL-50E†
65
80
1
22.8 (579)
3 (76)
N/A
63
Indoor
15HCL-65E†
15HCL-80E†
100
15HCL-100E†
125
15HCL-125E†
150
15HCL-150E†
175
15HCL-175E†
200
2
15HCL-200E†
15HCL-250E†
300
15HCL-300E†
Medium voltage
fuses
250
† UL Listed, Guide JEEG, File E240398.
Data sheet no. 10353
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-19
7 — Medium voltage fuses
5.5 to 38 kV E-Rated DIN medium voltage fuses
Bussmann series DIN dimensioned E-Rated medium voltage power
fuses with striker for indoor use. Available in general purpose (5.5 to
17.5 kV) and full range (25.8 to 38 kV) versions.
Ratings
•
Volts 5.5 - 38 kV
•
Amps 10 - 450 A
•
Interrupting ratings 25 to 65 kA
Agency information
•
General purpose E-Rated per ANSI C37.46 (5.5 to 17.5 kV)
•
Full range E-Rated per ANSI C37.40 (25.8 to 38 kV)
Striker force
•
50 N (11 lbs)
Recommended fuseclips
See page 7-36 for dimensions.
Amp range
Description
Catalog no.
Up to 200 A
Enclosed fuseclip with wingnut
tensioner
A3354745*
Open fuseclip with spring tensioner
270303
* Not sold in pairs.
Features
•
Cool running for lower watts loss
•
100% X-ray inspected to help assure fuse integrity
•
Striker provides visual indication of fuse operation or a means to
activate a remote monitoring system
Typical applications
•
Primary protection for medium voltage transformers and switch
gear
•
Protection of medium voltage feeder circuits
•
Direct OEM replacement fuses for 600 A Square D HVLCC and
HVL switches
Dimensions — in (mm)
Striker in operated position
(striker force 50 N/11 Lbs)
0.59
(15)
1.77
(45)
Diameter
Length
See catalog numbers tables for diameter and length values.
1.34
(34)
1.02
(26)
Data sheet no. 10638
7-20
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
Amps
Interrupting rating (Sym. kA)
10
15
20
25
30
40
50
65
80
100
125
150
175
200
250
300
350
400
450
65
175
200
65
10
15
20
25
30
40
50
65
80
100
125
150
10
15
20
25
30
40
50
65
258GXZSJ80E
80
258GXZSJ100E
38 kV
38GFZSJ10E
38GFZSJ15E
38GFZSJ20E
38GFZSJ25E
38GFZSJ30E
100
10
15
20
25
30
Dimensions — in (mm)
Length
65
Diameter
17.4 (442)
2 (51)
17.4 (442)
3 (76)
21.1 (537)
3.5 (89)
17.4 (442)
2 (51)
17.4 (442)
3 (76)
17.4 (442)
3.5 (89)
21.1 (537)
3.5 (89)
21.1 (537)
2 (51)
21.1 (537)
3.5 (89)
28.3 (718)
3.5 (89)
28.3 (718)
3 (76)
Medium voltage
fuses
Catalog no.
General purpose versions
5.5 kV
55GDMSJ10E
55GDMSJ15E
55GDMSJ20E
55GDMSJ25E
55GDMSJ30E
55GDMSJ40E
55GDMSJ50E
55GDMSJ65E
55GDMSJ80E
55GDMSJ100E
55GDMSJ125E
55GFMSJ150E
55GFMSJ175E
55GFMSJ200E
55GFMSJ250E
55GFMSJ300E
55GFMSJ350E
55GFMSJ400E
55GFMSJ450E
15.5 kV
155GXQSJ175E
155GXQSJ200E
17.5 kV
175GDMSJ10E
175GDMSJ15E
175GDMSJ20E
175GDMSJ25E
175GDMSJ30E
175GFMSJ40E
175GFMSJ50E
175GFMSJ65E
175GXMSJ80E
175GXMSJ100E
175GXQSJ125E
175GXQSJ150E
Full range versions
25.8 kV
258GDQSJ10E
258GDQSJ15E
258GDQSJ20E
258GDQSJ25E
258GDQSJ30E
258GXQSJ40E
258GXQSJ50E
258GXQSJ65E
25
25
Data sheet no. 10638
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-21
7 — Medium voltage fuses
Dimensions — in (mm)
2.4 kV R-Rated fuses
Catalog symbols/construction
Construction
•
JCK-_R/Standard
•
2CLS-_R/Standard
•
JCK-A-_R*/AMPGARD Hookeye
•
2ACLS-_R/AMPGARD Hookeye
•
JCH-_R/Hermetically sealed AMPGARD
•
2HCLS-_R/Hermetically sealed AMPGARD
•
JCK-B-_R/Bolt-on
•
2BCLS-_R/Bolt-on
Standard short
AMPGARD
Hookeye*
Bolt-on
Amps
25-230A
390-450A
70-230A
390-450A
25-230A
390-450A
Dimension
A
B
10.8 (274)
3 (76)
C
3 (76)
19.2 (488) 17.9 (455)
D
—
3.3 (84)
—
3.3 (84)
—
3.3 (84)
* Includes hermetically sealed versions.
* For use in 400 amp AMPGARD motor starters.
Standard and AMPGARD Hookeye
Ratings
Volts
• 2.4 kV (nominal)
•
•
D
2.54 kV (max design)
•
Amps 25-450 A
•
Interrupting ratings
• 50 kA Sym.
•
Gripping tab
for Hookeye
constructions only
C
B
A
80 kA Asym.
Bolt-on
Agency information
UL Recognized: Guide MSSS2, File E96676 (JCK-_R [2R-12R] and
JCK-A-_R [2R-12R])
•
Indicator
Recommended fuseclips and holders for standard
constructions
Amps
Fuseclips
25-230A
Description
D
A3354730
1A0065
9078A67G04
R 0.23 [5.81] Typ.
EFGHI
Indicator
C
2.12
[53.8]
Catalog no.
3” Enclosed fuseclip*
3” Open fuseclip
3” Spring loaded open fuseclip
25-450A
E = 3 [76.2]
F = 2.5 [63.5]
G = 2.04 [51.81
H = 0.96 [24.4]
I = 0.5 [12.7]
3.0
[76.2]
B
A
3.0
[76.2]
Fuse holders
Non-disconnect holder, porcelain
Non-disconnect holder, glass polyester
25-230A
Single barrel Disconnect holder, porcelain
Disconnect holder, glass polyester
Non-disconnect holder, porcelain
390-450A
Non-disconnect holder, glass polyester
Double
Disconnect holder, porcelain
barrel
Disconnect holder, glass polyester
2CLE-PNM-D
2CLE-GNM-D
2CLE-PDM-D
2CLE-GDM-E
2CLE-PNM-E
2CLE-GNM-E
2CLE-PDM-E
2CLE-GDM-E
* Single barrel only, not sold in pairs.
2.4 kV R-Rated fuse catalog numbers
Amps
25
70
100
130
150
170
200
230
390
450
"R"
Des.
—
2R
3R
4R
5R
6R
9R
12R
18R
24R
Standard
—
2CLS-25* (100)
JCK-2R (165)
2CLS-2R (180)
JCK-3R (220)
2CLS-3R (270)
JCK-4R (320)
2CLS-4R (360)
JCK-5R (410)
2CLS-5R (450)
JCK-6R (480)
2CLS-6R (540)
JCK-9R (720)
2CLS-200* (740)
JCK-12R (970)
2CLS-230* (1080)
JCK-18R (1430)† 2CLS-390* (1500)
JCK-24R (1880)† 2CLS-450* (2200)
Mounting style (minimum
Standard AMPGARD
—
2ACLS-25* (90)
JCK-A-2R (165)
2ACLS-2R (180)
JCK-A-3R (220)
2ACLS-3R (270)
JCK-A-4R (320)
2ACLS-4R (360)
JCK-A-5R (410)
2ACLS-5R (450)
JCK-A-6R (480)
2ACLS-6R (540)
JCK-A-9R (720)
2ACLS-200* (740)
JCK-A-12R (970)
2ACLS-230* (1080)
JCK-A-18R (1430)† 2ACLS-390* (1500)
JCK-A-24R (1880)† 2ACLS-450* (2200)
interrupting rating in amps)
Hermetically sealed AMPGARD
JCH-30* (90)
2HCLS-25* (90)
JCH-2R (180)
2HCLS-2R (180)
JCH-3R (270)
2HCLS-3R (270)
JCH-4R (360)
2HCLS-4R (360)
JCH-5R (450)
2HCLS-5R (450)
JCH-6R (540)
2HCLS-6R (540)
JCH-200* (740) 2HCLS-200* (740)
JCH-230* (1080) 2HCLS-230* (1080)
JCH-390* (1500) 2HCLS-390* (1500)
JCH-450* (2200) 2HCLS-450* (2200)
No. of
Bolt-on
barrels
JCK-B-25* (90)
2BCLS-25* (90)
JCK-B-2R (180)
2BCLS-2R (180)
JCK-B-3R (270)
2BCLS-3R (270)
JCK-B-4R (360)
2BCLS-4R (360)
1
JCK-B-5R (450)
2BCLS-5R (450)
JCK-B-6R (540)
2BCLS-6R (540)
JCK-B-200* (740)
2BCLS-200* (740)
JCK-B-230* (1080) 2BCLS-230* (1080)
JCK-B-390* (1500) 2BCLS-390* (1500)
2
JCK-B-450* (2200) 2BCLS-450* (2200)
* Does not comply with ANSI C37.46 for “R” rating.
† Not UL Recognized.
Data sheet no. 6001
7-22
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
Dimensions — in (mm)
4.8 kV R-Rated fuses
Catalog symbols/construction
•
5CLS-30 and 5CLS-_R/Standard - short (30 A, 2R-24R)
•
JCL-_R/Standard - short (2R - 24R)
•
5LCLS-_R/Standard - long (2R - 24R)
•
5ACLS-30 and 5ACLS-_R/AMPGARD Hookeye* (30 A, 2R-24R)
•
JCL-A-_R/AMPGARD Hookeye* (2R - 24R)
•
5HCLS-30 and 5HCLS-_R/Hermetically sealed AMPGARD
Hookeye* (30 A, 2R-24R)
•
5BCLS-30 and 5BCLS-_R/Bolt-on (30 A, 2R-44R)
•
JCL-B-_R/Bolt-on (2R-24R)
•
5MCLS-_R-_A and 5MCLS-_R-_B/Bolt-on GE Limitamp (2R- 24R)
Construction
Amp
30-230
390-450
70-230
390-450
30-230
390-450
30-230
390-450
600-800
70-230
390-450
70-230
390-450
Standard - short
Standard - long
AMPGARD
Hookeye*
Bolt-on
Limitamp (-A)
* For use in 400 amp AMPGARD motor starters
Limitamp (-B)
Ratings
4.8 kV (nominal)
•
5.0 kV (max design)
Amps 30-800 A
•
Interrupting ratings
•
50 kA Sym.
•
80 kA Asym.
18.3 (465)
Indicator
C
B
File E96676: JCL-_R [2R-12R], JCL-A-_R [2R-12R],
5MCLS-_R-A [2R-24R], and 5MCLS-_R-B [2R-24R]
E = 3 [76.2]
F = 2.5 [63.5]
G = 2.04 [51.81
H = 0.96 [24.4]
I = 0.5 [12.7]
D
Recommended fuseclips and holders for standard
constructions
3” Enclosed fuseclip*
3” Open fuseclip
3” Spring loaded open fuseclip
Fuse holders for CLS / JCL / 5HCLS
Non-disconnect holder, porcelain
30-230A
Non-disconnect holder, glass polyester
Single
Disconnect holder, porcelain
barrel
Disconnect holder, glass polyester
Non-disconnect holder, porcelain
390-450A Non-disconnect holder, glass polyester
Double
Disconnect holder, porcelain
barrel
Disconnect holder, glass polyester
Fuse holders for 5LCLS†
Non-disconnect holder, porcelain
Non-disconnect holder, glass polyester
70-230A
Disconnect holder, porcelain
Single
Disconnect holder, glass polyester
barrel
Disconnect holder, porcelain
Disconnect holder, glass polyester
390-450A Disconnect holder, porcelain
Double
Disconnect holder, glass polyester
Barrel
30-450A
BIL
(kV) Catalog no.
—
A3354730
1A0065
9078A67G04
60
5HLE-PNM-D
5HLE-GNM-D
5HLE-PDM-D
5HLE-GDM-D
5HLE-PNM-E
5HLE-GNM-E
5HLE-PDM-E
5HLE-GDM-E
EFGHI
R 0.23 [5.81] Typ.
Indicator
C
File E60757: 5CLS-30, 5CLS-_R [2R-18R], 5ACLS-30, and
5ACLS-_R [2R-24R]
Description
A
Bolt-on — 5BCLS-_
UL Recognized, Guide MSSS2
Amps
Fuseclips
30-230A
19.2 (488)
Gripping tab
for Hookeye
constructions only
D
Agency information
•
15.6 (396)
D
—
3.3 (84)
—
3 (76)
3.3 (84)
3 (76)
—
3.3 (84)
—
17.9 (455)
3.3 (84)
4 (101) 9 (229)
4.8 (122)
7.4 (188)
18.8 (478) 1.4 (36)
3.0 (76)
2.4 (61)
Ferrule JCL, 5LCLS, 5CLS and AMPGARD Hookeye
•
•
17.8 (452)
C
* Includes hermetically sealed versions.
Volts
•
•
15.6 (396)
B
2.12
[53.8]
3.0
[76.2]
B
A
3.0
[76.2]
Bolt-on — 5MCLS-_R-A
2 SLOTS (0.38X0.5)
0.25
C
17.7 (striker not extended)
16.5
0.25
0.25
D
7.75
3.1
2.25
Ø3.0 (REF)
60
75
60
5CLE-PNM-D
5CLE-GNM-D
5CLE-PDM-D
5CLE-GDM-D
8CLE-PDM-D
8CLE-GDM-D
5CLE-PDM-E
2.250
A
B
2 SLOTS
(.343 X .875)
C
Bolt-on — 5MCLS-_R-B
17.7 (striker not extended)
0.25
Ø3.00 REF
16.5
0.25
0.25
3.1
7.01
2.25
D
0.38
A
B
2.25
2 SLOTS (0.38X0.5)
5CLE-GDM-E
* Single barrel only, not sold in pairs.
** Not available for standard - long constructions
† Not available for 390 to 450 amp ratings.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
2 SLOTS
(0.343X0.875)
C
C
Data sheet no. 6001
Eaton.com/bussmannseries
7-23
Medium voltage
fuses
•
Dimension
A
7 — Medium voltage fuses
4.8 kV R-Rated fuse catalog numbers
Ferrule constructions (min. interrupting rating in amps)
Amps
Short
Short
No. of
barrels
Long
30
5CLS-30* (100)
70
5CLS-2R (180)
JCL-2R (165)
—
5LCLS-2R (180)†
—
Bolt-on (min. interrupting rating in amps)
Amps
Regular
No. of
barrels
Regular
30
5BCLS-30* (100)†
70
5BCLS-2R (180)†
—
JCL-B-2R (165)†
100
5CLS-3R (270)
JCL-3R (220)
5LCLS-3R (270)†
100
5BCLS-3R (270)†
JCL-B-3R (220)†
130
5CLS-4R (360)
JCL-4R (320)
5LCLS-4R (360)†
130
5BCLS-4R (360)†
JCL-B-4R (320)†
150
5CLS-5R (450)
JCL-5R (410)
5LCLS-5R (450)†
150
5BCLS-5R (450)†
JCL-B-5R (410)†
1
170
5CLS-6R (540)
JCL-6R (480)
5LCLS-6R (540)†
170
5BCLS-6R (540)†
JCL-B-6R (480)†
200
5CLS-9R (740)
JCL-9R (720)
5LCLS-9R (740)†
200
5BCLS-9R (740)†
JCL-B-9R (720)†
230
5CLS-12R (1080)
JCL-12R (970)
5LCLS-12R (1080)†
230
5BCLS-12R (1080)†
JCL-B-12R (970)†
390
5CLS-18R (1500)
JCL-18R (1430)†
5LCLS-18R (1500)†
390
5BCLS-18R (1500)†
JCL-B-18R (1430)†
450
5CLS-24R (2200)†
JCL-24R (1880)†
5LCLS-24R (2200)†
JCL-B-24R (1880)†
2
* Does not comply with ANSI C37.46 for "R" rating.
† Not UL Recognized.
AMPGARD Hookeye (min. interrupting rating in amps)
Amps
Hookeye
Hookeye
Hermetic seal
—
No. of
barrels
5HCLS-30* (100)†
450
5BCLS-24R (2200)†
600
5BCLS-32R (3000)†
—
650
5BCLS-36R (3200)†
—
800
5BCLS-44R (3600)†
—
2
* Does not comply with ANSI C37.46 for "R" rating.
† Not UL Recognized.
30
5ACLS-30* (100)
70
5ACLS-2R (180)
JCL-A-2R (165)
5HCLS-2R (180)†
GE Limitamp (min. interrupting rating in amps)
100
5ACLS-3R (270)
JCL-A-3R (220)
5HCLS-3R (270)†
Amps
130
5ACLS-4R (360)
JCL-A-4R (320)
5HCLS-4R (360)†
150
5ACLS-5R (450)
JCL-A-5R (410)
5HCLS-5R (450)†
1
30
70
Bolt-on
No. of
barrels
Bolt-on
—
—
5MCLS-2R-A (180)
5MCLS-2R-B (180)
170
5ACLS-6R (540)
JCL-A-6R (480)
5HCLS-6R (540)†
100
5MCLS-3R-A (270)
5MCLS-3R-B (270)
200
5ACLS-9R (740)
JCL-A-9R (720)
5HCLS-9R (740)†
130
5MCLS-4R-A (360)
5MCLS-4R-B (360)
230
5ACLS-12R (1080)
JCL-A-12R (970)
5HCLS-12R (1080)†
150
5MCLS-5R-A (450)
5MCLS-5R-B (450)
390
5ACLS-18R (1500)
JCL-A-18R (1430)† 5HCLS-18R (1500)†
450
5ACLS-24R (2200)
JCL-A-24R (1880)† 5HCLS-24R (2200)†
2
* Does not comply with ANSI C37.46 for "R" rating.
† Not UL Recognized.
1
170
5MCLS-6R-A (540)
5MCLS-6R-B (540)
200
5MCLS-9R-A (850)
5MCLS-9R-B (850)
230
5MCLS-12R-A (1150)
5MCLS-12R-B (1150)
390
5MCLS-18R-A (1725)
5MCLS-18R-B (1725)
450
5MCLS-24R-A (2350)
5MCLS-24R-B (2350)
1
2
* Does not comply with ANSI C37.46 for "R" rating.
† Not UL Recognized.
5CLS, JCL, JCL-A, 5ACLS and 5HCLS Type mountings — in (mm)
Hole centers
Catalog no.
A
Disconnect single barrel†
5CLE-GDM-D
15.24 (387.1)
5CLE-PDM-D
5HLE-PDM-D
16.25 (412.8)
5HLE-GDM-D
Disconnect double barrel†
5CLE-GDM-E
15.24 (387.1)
5CLE-PDM-E
5HLE-GDM-E
16.25 (412.8)
5HLE-PDM-E
Non-disconnect single barrel
5CLE-GNM-D
15.24 (387.1)
5CLE-PNM-D
5HLE-GNM-D
16.25 (412.7)
5HLE-PNM-D
Non-disconnect double barrel
5HLE-PNM-E
16.25 (412.7)
5HLE-GNM-E
B
Overall length C
Hole inset D
Hole ctr. E
Contact hgt. F
Overall hgt. G
BIL
(kV)
0.62 (15.7)
1.75 (44.4)
4.5 (114.3)
11.72 (297.7)
60
0.62 (15.7)
1.75 (44.4)
4.5 (114.3)
15.28 (388.1)
60
0.62 (15.7)
1.75 (44.4)
4.5 (114.3)
8.79 (223.3)
60
0.62 (15.7)\
1.75 (44.4)
4.5 (114.3)
12.48 (317.0)
60
25 (647.7)
6 (152.4)
23 (584.2)
25 (647.7)
6 (152.4)
23 (584.2)
25 (635.0)
6 (152.4)
23 (584.2)
6 (152.4)
25 (635.0)
Data sheet no. 6001
7-24
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
Dimensions — in (mm)
7.2 kV R-Rated fuses
Catalog symbols/construction
•
8CLS-_R/Standard (2R - 6R)
•
8ACLS-_R/AMPGARD Hookeye* (2R - 6R)
•
7BCLS-_R/Bolt-on (2R - 6R)
Construction
Standard
AMPGARD Hookeye
Bolt-on
70-170
Dimension
A
B
15.8 (401)
3 (76)
19.2 (488)
17.9 (455)
C
3 (76)
Standard and AMPGARD Hookeye
* For use in 400 amp AMPGARD motor starters.
Gripping tab
for Hookeye
constructions
Ratings
•
Amps
Indicator
Volts
C
•
7.2 kV (nominal)
•
8.3 kV (max design 70-170 A standard and AMPGARD Hookeye)
•
7.2 kV (max design 70-170 A bolt-on)
•
Amps 70-170 A
•
Interrupting ratings
•
50 kA Sym.
•
80 kA Asym.
B
A
Bolt-on
Recommended fuseclips and holders for standard
constructions
Amps Description
Fuseclips
3” Enclosed fuseclip*
70-170 3” Open fuseclip
3” Spring loaded open fuseclip
Fuse holders for 7CLS and 8CLS
Non-disconnect holder, porcelain
Non-disconnect holder, glass polyester
70-170
Disconnect holder, porcelain
Disconnect holder, glass polyester
BIL (kV) Cat. No.
—
75
A3354730
1A0065
9078A67G04
8HLE-PNM-D
8HLE-GNM-D
8HLE-PDM-D
8HLE-GDM-D
E = 3 [76.2]
F = 2.5 [63.5]
G = 2.04 [51.81
H = 0.96 [24.4]
I = 0.5 [12.7]
R 0.23 [5.81] Typ.
EFGHI
Indicator
C
2.12
[53.8]
B
A
3.0
[76.2]
* Single barrel only, not sold in pairs.
7.2 kV R-Rated fuse catalog numbers
“R” Designation
2R
3R
4R
5R
6R
Mounting style (minimum interrupting rating in amps)
Standard
AMPGARD Hookeye
8CLS-2R (160)
8ACLS-2R (160)
8CLS-3R (250)
8ACLS-3R (250)
8CLS-4R (325)
8ACLS-4R (325)
8CLS-5R (390)
8ACLS-5R (390)
8CLS-6R (500)
8ACLS-6R (500)
Bolt-on
7BCLS-2R
7BCLS-3R
7BCLS-4R
7BCLS-5R
7BCLS-6R
No. of barrels
(160)
(250)
(325)
(390)
(500)
Medium voltage
fuses
Amps
70
100
130
150
170
1
Data sheet no. 6001
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-25
7 — Medium voltage fuses
E-Rated PT medium voltage fuses
Dimensions — in (mm)
C
B
A
Catalog symbols (by maximum voltage rating)
•
2.475 kV
•
•
•
•
•
•
2NCLPT-_
3.6 kV
12 kV
•
12ABCNA_
•
12CAV_
•
3.6ABCNA_
•
3.6ABWNA_
•
15CLPT-_E
•
3.6CAV_
•
15NCLPT-_E-A
•
15NCLPT-_E-B
•
5.5 kV
15.5 kV
•
JCW-_
•
15.5CAV_E
•
5CLPT-_E
•
15.5CAVH_E
•
5NCLPT-_E
•
5NCLPT-_E-A
•
17.5ABGNA_
•
5.5ABWNA_E
•
17.5CAV_
•
5.5AMWNA_E
•
5.5CAV_E
•
24ABGNA_
•
5.5CAVH_E
•
24CAV_
•
•
7.2 kV
•
PTFB-2500-JCD
25.5 kV
•
7.2ABCNA_
•
7.2AMWNA_E
•
36ABGNA_
•
7.2CAV_
•
36CAV_
•
•
Catalog no.
1A1837
24 kV
7.2ABWNA_
8.3 kV
Description
Open fuseclip for 0.8 (20 mm) dia. fuses
Single-pole open fuse block with #10-32 phil-slot
screw terminals rated 2500 V, 5 A maximum and
63 kA withstand rating
17.5 kV
•
•
Recommended fuseclip and block
25CLPT-_E
36 kV
38 kV
•
8CLPT-_E-A
•
38CAV_E
•
8NCLPT-_E
•
38CAVH_E
•
8NCLPT-_E-A
•
38CLPT-_E
•
8NCLPT-_E-B
Ratings*
•
Volts 2.4 kV to 38 kV
•
Amps 0.25 to 15 A
•
Interrupting ratings 25 to 80 kA RMS Sym.
* See catalog number tables for voltages, ampacities and interrupting ratings by
catalog number.
Agency information
•
PT fuses conforming to the requirements for E-Rating meet the
performance characteristics of IEEE/ANSI C37.46
Data sheet no. 6002
7-26
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
2.475 to 38 kV PT E-Rated fuses
Dimensions — in (mm)
Amps
Length A
Catalog no. (IR - kA)
Diameter B
Clip centers C
Indicating
Non-indicating
—
2NCLPT-.25E (63)
Recommended
fuseclip
2.475 kV maximum system voltage
0.25
0.5
1
4.5 (114)
0.8 (20)
3.9 (99)
—
2NCLPT-.5E (63)
—
2NCLPT-1E (40)
2
—
2NCLPT-2E (40)
5
—
2NCLPT-5E (25)
7.6 (193)
—
3.6CAV2 (50)
3.6ABWNA3.15 (50)
1A1837
3.6 kV maximum system voltage
2
8.7 (221)
1.6 (41)
3.15
5.6 (142)
4.4 (112)
—
3.15
7.7 (195)
6.5 (165)
—
3.6ABCNA3.15 (50)
6.3
5.6 (142)
4.4 (112)
—
3.6ABWNA6.3 (50)
6.3
10
1 (25)
7.7 (195)
6.5 (165)
1A1837
A3354705
—
3.6ABCNA6.3 (50)
—
3.6ABCNA10 (50)
—
5.5AMWNA0.5E (50)
1A1837
5.5 kV maximum system voltage
0.5
5.6 (142)
0.8 (20)
4.8 (122)
1 (25)
4.4 (112)
—
5.5ABWNA0.5E (50)
A3354705
0.5
7.4 (188)
1.6 (41)
6.2 (157)
5.5CAVH0.5E (50)
JCW-1/2E (40)
1A0835
0.5
9.5 (241)
1.6 (41)
8.1 (206)
5CLPT-.5 (50)
5NCLPT-.5E-A (50)
1A0835
1 (25)
4.4 (112)
—
5.5ABWNA1E (50)
A3354705
0.8 (20)
4.8 (122)
—
5.5AMWNA1.0E (50)
1A1837
6.2 (157)
5.5CAVH1E (50)
JCW-1E (40)
5CLPT-1 (50)†
5NCLPT-1E-A (50)
1
1
1
1
1.5
5.6 (142)
7.4 (188)
9.5 (241)
2
2
1 (25)
5.6 (142)
2
2
3
3
1.6 (41)
7.4 (188)
5.6 (142)
3
9.5 (241)
3
7.4 (188)
0.8 (20)
8.1 (206)
†
5CLPT-1.5 (50)
†
1A0835
—
4.4 (112)
—
5.5ABWNA2E (50)
8.1 (206)
—
5NCLPT-2E (50)
4.8 (122)
—
5.5AMWNA2.0E (50)
A3354705
1A1837
1.6 (41)
6.2 (157)
5.5CAVH2E (50)
JCW-2E (40)
1A0835
1 (25)
4.4 (112)
—
5.5ABWNA3E (50)
A3354705
0.8 (20)
4.8 (122)
—
5.5AMWNA3.0E (50)
1A1837
8.1 (206)
5CLPT-3E (50)
5NCLPT-3E (50)
6.2 (157)
—
JCW-3E (40)
1.6 (41)
1A0835
4
5.6 (142)
0.8 (20)
4.8 (122)
—
5.5AMWNA4.0E (50)
1A1837
5
9.5 (241)
1.6 (41)
8.1 (206)
5CLPT-5E (50)
5NCLPT-5E-A (50)
1A0835
5
5
5.6 (142)
5
7.3 (185)
10
9.5 (241)
15
7.4 (188)
1 (25)
4.4 (112)
—
5.5ABWNA5E (50)
A3354705
0.8 (20)
4.8 (122)
—
5.5AMWNA5.0E (50)
1A1837
5.9 (150)
—
JCW-5E (40)
1.6 (41)
8.1 (206)
5CLPT-10E (50)
5NCLPT-10E (50)
6.2 (157)
—
5.5CAV15E (50)
1A0835
† Due to manufacturing variations, this fuse does not comply with ANSI C37.46 for "E" rating.
Data sheet no. 6002
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-27
Medium voltage
fuses
0.5
7 — Medium voltage fuses
2.475 to 38 kV PT E-Rated fuses
Dimensions — in (mm)
Amps
Length A
Catalog no. (IR - kA)
Diameter B
Clip centers C
Indicating
Non-indicating
Recommended
fuseclip
7.2 kV maximum system voltage
0.5
7.2AMWNA0.5E (50)
1
5.6 (142)
0.8 (20)
4.8 (122)
7.2AMWNA1.0E (50)
2
1A1837
7.2AMWNA2.0E (50)
2
8.7 (221)
1.6 (41)
7.5 (190)
0.8 (20)
3
5.6 (142)
3.15
5.6 (142)
3.15
7.7 (195)
1 (25.4)
7.2CAV2 (40)
1A0835
4.8 (122)
7.2AMWNA3.0E (50)
1A1837
4.4 (112)
7.2ABWNA3.15 (45)
6.5 (165)
4
5.6 (142)
0.8 (20)
4.8 (122)
4
8.7 (221)
1.6 (41)
7.5 (190)
—
7.2ABCNA3.15 (45)
A3354705
7.2AMWNA4.0E (50)
1A1837
7.2CAV4 (40)
1A0835
5
5.6 (142)
0.8 (20)
4.8 (122)
7.2AMWNA5E (50)
1A1837
6
8.7 (221)
1.6 (41)
7.5 (190)
7.2CAV6 (40)
1A0835
6.3
5.6 (142)
6.3
7.7 (195)
4.4 (112)
7.2ABWNA6.3 (45)
6.5 (165)
7.2ABCNA6.3 (45)
10
8.7 (221)
1.6 (41)
7.5 (190)
7.2CAV10 (40)
9.5 (241)
1.6 (41)
8.1 (206)
1
5 (127)
1.1 (28)
4 (102)
1
9.5 (241)
1.6 (41)
8.1 (206)
2
8 (203)
0.8 (20)
7.2 (183)
1 (25.4)
A3354705
1A0835
8.3 kV maximum system voltage
0.5
2
9.5 (241)
3
12.9 (328)
4
8 (203)
1.6 (41)
0.8 (20)
8CLPT-.5 (50)†
—
8.1 (206)
11.5 (292)
5
5 (127)
1.1 (28)
4 (102)
12.9 (328)
1.6 (41)
11.5 (292)
8
5 (127)
1.1 (28)
4 (102)
10
12.9 (328)
1.6 (41)
11.5 (292)
1A0835
A3354705
8NCLPT-1E-A (50)
1A0835
8NCLPT-2E (25)
1A1837
8NCLPT-2E-A (50)
8CLPT-3E (50)
7.2 (183)
5
8NCLPT-.5E-A (50)
8NCLPT-1E (50)
—
8CLPT-5E (50)
8NCLPT-3E-B (50)
8NCLPT-4E (25)
1A0835
1A1837
8NCLPT-5E (50)
A3354705
8NCLPT-5E-B (50)
1A0835
—
8NCLPT-8E
A3354705
8CLPT-10E (50)
8NCLPT-10E-B (50)
1A0835
12 kV maximum system voltage
2
8.7 (221)
1.6 (41)
7.5 (190)
3.15
7.7 (195)
1 (25)
6.5 (165)
—
12CAV2 (40)
1A0835
12ABCNA3.15 (45)
A3354705
15.5 kV maximum system voltage
0.5
12.9 (328)
11.5 (292)
15.5CAVH0.5E (80)
15NCLPT-.5E-A (50)
1
12.9 (328)
11.5 (292)
15.5CAVH1E (80)
15NCLPT-1E-A (50)
15.5CAVH2E (80)
2
12.9 (328)
11.5 (292)
3
12.9 (328)
11.5 (292)
—
15.5CAV3E (80)
3
17.6 (447)
16.1 (409)
—
15NCLPT-3E (50)
3
17.6 (447)
5
12.9 (328)
11.5 (292)
5
17.6 (447)
16.1 (409)
7
12.9 (328)
11.5 (292)
10
17.6 (447)
16.1 (409)
1.6 (41)
16.1 (409)
15CLPT-3E (50)
—
15CLPT-5E (50)
—
15CLPT-10E (50)
15NCLPT-2E (50)
—
1A0835
15.5CAV5E (80)
15NCLPT-5E (50)
15.5CAV7E (80)
15NCLPT-10E (50)
17.5 kV maximum system voltage
2
17.5CAV2 (40)
4
8.7 (221)
6
1.6 (41)
7.5 (190)
10
—
17.5CAV4 (40)
17.5CAV6 (40)
1A0835
17.5CAV10 (40)
† Does not comply with ANSI C37.46 for "E" rating.
Data sheet no. 6002
7-28
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
2.475 to 38 kV PT E-Rated fuses
Dimensions — in (mm)
Amps
Length A
Catalog no. (IR - kA)
Diameter B
Clip centers C
Indicating
Non-indicating
—
24CAV2 (40)
Recommended
fuseclip
24 kV maximum system voltage
2
3
13.49 (340)
1.6 (41)
12.2 (310)
4
—
24CAV3 (40)
—
24CAV4 (40)
1A0835
25.5 kV maximum system voltage
0.5
17.6 (447)
1
1.6 (41)
16.1 (410)
1.6 (41)
16.1 (410)
25CLPT-.5 (43.5)†
—
25CLPT-1 (43.5)
—
†
1A0835
36 kV maximum system voltage
2
17.3 (439)
4
—
36CAV2 (40)
—
36CAV4 (40)
1A0835
38 kV maximum system voltage
0.5
17.3 (439)
16.1 (409)
38CAVH0.5E (40)
—
0.5
18.6 (472)
17.1 (434)
38CLPT-0.5 (43.5)†
—
38CAVH1E (40)
—
16.1 (409)
38CAVH2E (40)
—
—
38CAV4E (40)
1
1.6 (41)
2
17.3 (439)
4
1A0835
† Does not comply with ANSI C37.46 for “E” rating.
CLPT Type mountings and hardware
Catalog no.
Amps
Fuse mounting
type*
BIL
(kV)
Mounting (including live parts, end fittings)**
Porcelain insulator
Glass-polyester insulator
Live parts
(including end fittings)***
End fittings
(disconnect only)
5CLPT-PNM-A
5CLPT-GNM-A
CLPT-NL
—
5CLPT-PDM-A
5CLPT-GDM-A
CLPT-DL
CLPT-DF
5.5 kV maximum (4.8 kV nominal)†
0.5–10
Non-disconnect
Disconnect
††
60
8.3 kV maximum (7.2 kV nominal)†
0.5–2
3–10
Non-disconnect
8CLPT-PNM-A
8CLPT-GNM-A
CLPT-NL
—
Disconnect††
8CLPT-PDM-A
8CLPT-GDM-A
CLPT-DL
CLPT-DF
8CLPT-PNM-B
8CLPT-GNM-B
CLPT-NL
—
8CLPT-PDM-B
8CLPT-GDM-B
CLPT-DL
CLPT-DF
Non-disconnect
15CLPT-PNM-A
15CLPT-GNM-A
CLPT-NL
—
Disconnect††
15CLPT-PDM-A
15CLPT-GDM-A
CLPT-DL
CLPT-DF
15CLPT-PNM-B
15CLPT-GNM-B
CLPT-NL
CLPT-DF
15CLPT-PDM-B
15CLPT-GDM-B
CLPT-DL
—
25CLPT-NL
—
25CLPT-DL
CLPT-DF
CLPT-NL
CLPT-DF
CLPT-DL
—
Non-disconnect
75
Disconnect††
0.5–2
3–10
Non-disconnect
95
Disconnect††
Medium voltage
fuses
15.5 kV maximum (14.4 kV nominal)
25.5 kV Maximum (23 kV Nominal)
0.5–1
Non-disconnect
Disconnect
††
150
25CLPT-PNM-A
25CLPT-PDM-A
—
38 kV Maximum (34.5 kV Nominal)
0.5
Disconnect††
Non-disconnect
N/A
Not applicable
38CLPT-PNM-A
Not applicable
* See page 7-35 for dimensions and diagrams of typical mountings.
** End fittings supplied only when required.
† Refers to 5CLPT, 5NCLPT, 8CLPT and 8NCLPT-A or -B fuses only.
†† Disconnect mountings provide a means for fuse extraction only. Do not use a disconnect mounting for load switching or fuse removal while energized.
Data sheet no. 6002
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
7-29
7 — Medium voltage fuses
HVA, HVB, HVJ, HVL, HVR, HVT, HVU, HVW and
HVX fast-acting PT fuses
Medium voltage, non-time delay, fast-acting fuses.
Ratings*
•
Volts 1-10 kV
•
Amps 1/16-10 A
* See catalog number table for possible volt/amp combinations.
Features
•
Physical size varies with electrical rating of fuse to prevent
overfusing
•
Space-saving size
Typical applications
•
Medium voltage instrument and circuit protection
Test specifications
Catalog symbol
Percent load
HVA, HVB, HVJ, HVL
HVR, HVT, HVU, HVW, HVX
Opening time
110
4 hours (min)
135
1 hour (max)
100
4 hours (min)
150
1 hour (max)
Recommended fuseclips and blocks
Fuse catalog symbol
Block catalog no.
HVA, HVR
4528*
HVB, HVT
4529*
HVJ, HVU
Fuseclip catalog no.
—
HVL, HVX
5960
4180
* Use #8 screws.
Dimensions — in (mm)
Catalog symbol
kV
Amps
Max. IR (amps)
HVA
1
1/16, 1/10, 1/8, 2/10, 1/4, 3/8, 1/2, 3/4, 1, 1-1/2, 2, 3, 4, 6, 10
20 DC / 30 AC
HVB
2.5
1/2, 3/4, 1, 1-1/2, 2, 3
8 DC / 12 AC
HVJ
5
1/16, 1/8, 1/4, 1/2, 3/4, 1, 1-1/2, 2, 4, 6*
4 DC / 6 AC
HVL
10
1/16, 1/8, 1/4, 1/2, 1, 1-1/2, 2, 3*
2 DC / 3 AC
HVR
1
1/2, 1, 2, 3, 4, 5
500 AC
HVW
1.2
1, 2, 3, 4, 5, 8
4 DC / 167 AC
HVT
2.5
1/2, 1, 2, 3, 5
500 AC
HVU
5
1/2, 1, 2, 3, 4, 5
500 AC
HVX
10
1/2, 1, 3, 5
1200 AC
Diameter
0.4 (10)
0.8 (21)
0.4 (10)
_____
___
-
0.8 (20)
E.g., HVB-3/4 (2.5 kV 3/4 amp fuse)
Data sheet no. 6003
7-30
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
5 (126.9)
10 (254)
2.3 (57)
4.5 (114)
Catalog number build-a-code
Amps
3 (76)
4.5 (114)
3 (76)
* AC only.
Fuse catalog symbol
Length
Eaton.com/bussmannseries
5 (127)
10 (254)
Medium voltage fuses — 7
British standard dimensioned IEC fuses for motor
circuit protection
The Bussmann series IEC motor fuses are designed to meet the
specific requirements necessary for motor protection. During the
starting cycle of direct on-line motors, the fuse elements will reach
a considerably higher temperature than during normal operation;
(this is due to the high amount of current the motor will draw as it
starts, typically, six times its normal load current value). This results
in expansion and contraction of the fuse elements and could cause
premature operation of the fuse.
Bussmann series motor fuses encompass an advanced design
to minimize this effect. This, therefore, negates the need to over
specify the fuse rating due to high values of motor starting current.
These motor fuses operate extremely quickly under heavy fault
currents, resulting from the time / current characteristic. Low
power dissipation ensures low temperature rise, important in multitier starters for example. Switching (arc), voltages are lower than
permitted values, therefore, 5.5 kV fuses are also suitable for 4.8 kV
and 2.4 kV circuits.
Catalog
symbol
3.6WJON6
3.6WDOH6
3.6WFOH6
3.6WDLSJ
3.6WFLSJ
3.6WDFHO
3.6WFFHO
3.6WKFHO
5.5VFNHA
5.5VKNHA
7.2WFNHO
7.2WKNHO
7.2WFMSJ
7.2WKMSJ
kV
3.6
5.5
7.2
IR
(kA) Amps/rating
5, 6.3, 10, 16, 20, 25, 31.5, 40, 50
50, 63, 80, 100, 125
160, 200
50, 63, 80, 100, 125
50
160, 200
50, 63, 80, 100, 125
160, 200
250, 315, 355, 400
2R, 3R, 4R, 6R
60
9R, 12R, 18R, 24R
25, 31.5, 40, 50, 63, 80, 100, 125, 160
40
200, 224, 250, 315
25, 31.5, 40, 50, 63, 80, 125, 160
63
200, 224, 250, 315, 355
Dimensions — in (mm)
Length
Diameter
1.4 (36)
7.6 (192)
2 (51)
3 (76)
2 (51)
11.5 (292)
3 (76)
2 (51)
10 (254)
Dimension standard
BS 2692 (TA1) Interchangeable with GEC Type K2 PA
BS 2692 (TA1) or DIN 43625
DIN 43625
BS 2692 (TA2)
ANSI R-Rated
15.9 (403)
3 (76)
BS 2692 (TA4)
17.4 (442)
DIN 43625
Catalog number build-a-code
Fuse catalog symbol
Amps
_____
___
-
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Medium voltage
fuses
E.g., 3.6WKFHO-315 (315 amp 3.6 kV fuse)
Eaton.com/bussmannseries
7-31
7 — Medium voltage fuses
DIN dimensioned IEC fuses for transformer
protection
DIN dimension fuses to Specification DIN 43625 covering currentlimiting fuses with performance in compliance with IEC 60282-1.
These are in accordance with the R10 and, in some cases, the R20
series of preferred numbers.
Typical applications
•
Ratings*
Medium voltage IEC designed equipment
Recommended fuseclips
•
Volts 3.6-36 kV
•
Amps 6.3-100 A
•
Interrupting ratings 20-50 kA
•
* See catalog number table for possible volt/amp combinations.
Catalog numbers 270303, A3354745, see page 7-36.
Dimensions — in (mm)
Striker -in
operated position
•
Compliant with DIN dimensional standard DIN 43625, VDE 0670
part 4, VDE 0670 part 40Z and with IEC 60282-1 (2005)
Diameter
Agency information
0.59
(15)
1.77
(45)
Features
Length
•
DIN dimensioned for retrofitting in existing hardware
•
Open fuse indicator for ease in troubleshooting
•
Designed for use in IEC equipment
kV
3.6
7.2
12
17.5
24
36
*
1
2
3
Catalog
symbol
3.6ADOSJ
3.6WDOSJ
3.6WFOSJ
3.6ADLSJ
3.6WKLSJ
7.2TDLSJ
7.2TFLSJ
12TDLEJ
12THLEJ
12TKLEJ
12TXLEJ*
17.5TDLSJ*
17.5TFLSJ*
17.5TDMEJ
17.5THMEJ
17.5TKMEJ
24TDMEJ
24THMEJ
24TFMEJ
24TXMEJ*
36TDQSJ
36TFQSJ
36TXQEJ*
Amps
6.3, 10, 16, 20, 25, 31.5, 40
50, 63, 80, 100, 125
160, 200
25, 40
250, 315, 400
6.3, 10, 16, 20, 25, 31.5, 40,
80, 100, 125, 160
6.3, 10, 16, 20, 25, 31.5, 40,
80, 100
125
160, 200
6.3, 10, 16, 20, 25, 31.5, 40
50
6.3, 10, 16, 20, 25, 31.5, 40,
80, 100
125
6.3, 10, 16, 20, 25, 31.5, 40,
63
80, 100*1
1252, 160
3.153, 6.3, 10, 16, 20, 25
31.5, 40, 50
63
For diameter and length values, see catalog number table.
Dimensions — in (mm)
Diameter
Length
2.0 (51)
50, 63
50, 63
50, 63
50
3.0 (76)
2.0 (51)
3.0 (76)
2.0 (51)
3.0 (76)
2.0 (51)
2.5 (64)
3.0 (76)
3.5 (88)
2.0 (51)
3.0 (76)
2.0 (51)
2.5 (64)
3.0 (76)
2.0 (51)
2.5 (64)
3.0 (76)
3.5 (88)
2.0 (51)
3.0 (76)
3.5 (88)
IR RMS Sym. (kA)
40
7.6 (192)
50
11.5 (292)
40
63
11.5 (292)
35.5
50
17.4 (442)
50
31.5
21.2 (537)
35.5
20
Not compliant with VDE 0670, part 402.
IR RMS Sym. is 63 kA
IR RMS Sym. is 40 kA
IR RMS Sym. is 20 kA
Catalog number build-a-code
Fuse catalog symbol
Amps
_____
___
-
E.g., 17.5THMEJ-80 (17.5 kV 80 amp fuse)
7-32
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1.34
(34)
1.02
(26)
Medium voltage fuses — 7
Expulsion fuse links for use in high voltage
distribution cut-outs
Typical applications
•
Primary side transformer protection
Expulsion fuse links available in
a wide range of options from
15 to 72 kV in ANSI Type T and
K characteristics. Expulsion
fuse link current ratings should
be selected on the basis of
maximum expected transient
no-damage currents rather than
on full load current. In addition,
the selection of higher current
ratings will reduce the possibility
of supply interruption due to
transient surges such as those
due to lightning strikes.
•
Feeder protection
•
Capacitor bank protection
Fuse label color coding
Type
Color
Type
Color
XA
Pink
T
Green
K
Yellow
S
—
Dimensions — mm (in)
A
125 (4.92)
Links should be handled with a reasonable degree of care when
installing. Excessively rough handling may damage the element.
Universal
It is normal, under certain fault conditions, for arc extinguishing
material and/or metal particles to be expelled from the fuse
assembly. It is therefore recommended that reasonable precautions
be taken to prevent the installation being approached by
unauthorized persons.
When ordering, select from the table below the characteristics in
each column you need your fuse link to have.
Double tail
Ø10 (0.39)
Button head
Ø7.5 (0.29)
Ø19 (0.75)
Removeable button head
Up to 50 A
A
A
125 (4.92)
Example: 15TB30 is a 15 kV, ANSI C 37-42 compliant fuse with a
fixed button head terminal that is rated for 30 amps.
Double tail
11 (0.43)
The fuse link assembly for a given range is standard to all rated
voltages. The exception is the tail length that’s varied to suit the
expulsion carrier dimensions of different ratings.
Universal
Adjustable button for 65 to 100 a assembly only
Ø19 (0.75)
Button head
Ratings*
10.5 (0.41)
Ø19 (0.75)
•
Volts 15-72 kV
•
Amps 1-100 A
•
Interrupting rating 8 kA approximate
Removeable button head
60-100 A
Agency information
•
Type T, complies with ANSI C37-42
•
Type K, complies with ANSI C37-42
Link kV
A
Link kV
A
15
533 (21)
46
787 (31)
25
660 (26)
72
1016 (40
Notes: Type BR is similar to button head shown, except that the
button head is attached via a 1/4" UNF thread. Tails can be cut to
desired length.
Medium voltage
fuses
* See catalog number configuring table for possible volt/amp combinations.
A
Features
•
Wide range of options available from 15 kV to 72 kV in ANSI T and
K characteristics.
•
Extra rapid option also available.
Catalog number configuration table
Available voltage
ratings (kV)
15, 25, 46, 72
1st letter = current characteristics type
2nd letter = termination type
T = complies with ANSI C 37-42 requirements for
slow acting T characteristics
B = a fixed NEMA button head link
K = complies with ANSI C 37-42 requirements for
fast acting K characteristics
U = a universal link, with double tail and slip off
NEMA button head
XA = this type of expulsion fuse link has an extra
rapid characteristic. It is suitable for applications
where a high degree of system protection is
required at the expense of discrimination.
D = double tailed link without NEMA button head
S = Solid links rated at 100 amps are also available
in both button head and universal versions for
fitting into expulsion fuse carriers where required.
These can be ordered in a similar way using the
abbreviation S, e.g. 15SB, etc.
BR = as pattern B but the button head is attached via
a 1/4" UNF thread to allow use of an extension rod
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Available amps
ratings
1, 2, 3, 4, 5, 6,
7.5, 8, 10, 12, 15,
20, 25, 30, 40,
50, 60, 65, 75,
80, 100
7-33
7 — Medium voltage fuses
FL — Type H, and EEI-NEMA Type K and T fuses
Medium voltage fuses: Type H (high surge), EEI-NEMA Type K (fastacting), EEI-NEMA Type T (time-delay).
Type H (high-surge), K and T universal tin element cutout
fuses rated to 27 kV
Catalog no.
EEI-NEMA
High-surge, Type H fuses are
manufactured in ratings of 1,
2, 3, 5, and 8 amps and were
developed for primary fusing of
small-sized transformers. Type
H links are manufactured in the
universal button head design.
Type H high surge Type K fast-acting
Type T time-delay
Amps
Non-removable button-head for standard open or enclosed cutouts
Type N fuses conform to previous
NEMA standards and are
superseded by Type K and T links.
Type N fuses are manufactured
in the universal button design
in ratings of 5 through 200
amps for use in standard NEMA
dimensioned cutouts rated
through 27 kV.
FL11H1
FL11K1
FL11T1
1
FL11H2
FL11K2
FL11T2
2
FL11H3
FL11K3
FL11T3
3
FL11K5
FL11T5
5
FL11K6
FL11T6
6
FL11H5
—
FL11H8
Ratings*
FL11K8
FL11T8
8
—
FL11K10
FL11T10
10
—
FL11K12
FL11T12
12
—
FL11K15
FL11T15
15
—
FL11K20
FL11T20
20
—
FL11K25
FL11T25
25
•
Volts rated to 27 kV
—
FL11K30
FL11T30
30
•
Amps 1-200 A
—
FL11K40
FL11T40
40
* See catalog number table for type and amp combinations.
—
FL11K50
FL11T50
50
Features
—
FL11K65
FL11T65
65
—
FL11K80
FL11T80
80
—
FL11K100
FL11T100
100
—
FL11K140
FL11T140
140
—
FL11K200
FL11T200
200
•
Wide range of EEI-NEMA type fuse links for use in open fuse
cutouts
•
Voltage rating up to 27 kV for flexible application
•
Can be coordinated with other overcurrent protective devices for
sectionalizing to isolate feeder branches
Typical applications
•
Medium voltage fused cutouts
Type K universal silver-element cutout fuses rated to 27 kV
Catalog no.
Fast-acting EEI-NEMA Type K
Amps
Non-removable button-head for standard open or enclosed cutouts
FL12K8
8
FL12K10
10
FL12K12
12
FL12K15
15
FL12K25
25
FL12K50
50
7-34
Removable button-head for cutouts requiring removable-button links*
—
FL3K1
FL3T1
1
—
FL3K2
FL3T2
2
—
FL3K3
FL3T3
3
—
FL3K5
FL3T5
5
—
FL3K6
FL3T6
6
—
FL3K8
FL3T8
8
—
FL3K10
FL3T10
10
—
FL3K12
FL3T12
12
—
FL3K15
FL3T15
15
—
FL3K20
FL3T20
20
—
FL3K25
FL3T25
25
—
FL3K30
FL3T30
30
—
FL3K40
FL3T40
40
—
FL3K50
FL3T50
50
—
FL3K65
FL3T65
65
—
FL3K80
FL3T80
80
—
FL3K100
FL3T100
100
—
FL3K140
FL3T140
140
—
FL3K200
FL3T200
200
* Adapter-type removable-button links with ferrule adapter to convert to doubleleader links are available in K and T types. Order by description.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Medium voltage fuses — 7
PT fuse mountings — in (mm)
Catalog no.
Hole ctrs. A
5.5 kV Disconnect†
5CLPT-GDM-A
9.37 (238)
5CLPT-PDM-A
5.5 kV Non-disconnect
5CLPT-GNM-A
9.37 (238)
5CLPT-PNM-A
8.3 kV Disconnect†
8CLPT-GDM-A
8CLPT-GDM-B
9.37 (238)
8CLPT-PDM-A
8CLPT-PDM-B
12.74 (323.6)
8.3 kV Non-disconnect
8CLPT-GNM-A
9.37 (238)
8CLPT-PNM-A
8CLPT-GNM-B
12.75 (323.8)
8CLPT-PNM-B
15.5 kV Disconnect†
15CLPT-GDM-A
12.74 (323.6)
15CLPT-PDM-A
15CLPT-GDM-B
17.46 (443.5)
15CLPT-PDM-B
15.5 kV Non-disconnect
15CLPT-GNM-A
12.74 (323.6)
15CLPT-PNM-A
15CLPT-GNM-B
17.46 (443.5)
15CLPT-PNM-B
25.5 kV Disconnect†
25CLPT-PDM-A
19.12 (485.6)
25.5 kV Non-disconnect
25CLPT-PNM-A
26.63 (676.4)
Hole ctrs. B
Overall length C Hole Inset D Hole ctrs. E
Contact hgt. F
Overall hgt. G
BIL (kV)
6 (152.4)
18.63 (473.2)
0.75 (19)
1.75 (44.4)
4.5 (114.3)
9.56 (242.8)
60
6 (152.4)
18.63 (473.2)
0.75 (19)
1.75 (44.4)
4.5 (114.3)
6.94 (176.2)
60
0.75 (19)
1.75 (44.4)
7 (177.8)
12.06 (306.3)
75
0.75 (19)
1.75 (44.4)
7 (177.8)
9.44 (239.8)
75
0.75 (19)
1.75 (44.4)
7 (177.8)
12.06 (306.3)
95
0.75 (19)
1.75 (44.4)
7 (177.8)
9.44 (239.8)
95
6 (152.4)
18.63 (473.2)
22 (558.8)
18.63 (473.2)
6 (152.4)
22 (558.8)
22 (558.8)
6 (152.4)
26.63 (676.4)
22 (558.8)
6 (152.4)
26.63 (676.4)
7 (177.8)
26.63 (676.4)
0.75 (19)
1.75 (44.4)
12 (304.8)
17.06 (433.3)
150
7 (177.8)
26.63 (676.4)
0.75 (19)
1.75 (44.4)
12 (304.8)
14.75 (374.6)
150
† Disconnect mountings provide a means for fuse extraction only. Do not use a disconnect mounting for load switching or fuse removal while energized.
Disconnect mountings††
Non-disconnect mountings
G
G
F
D
F
D
C
A
E
Medium voltage
fuses
E
E
A
C
E
D
B
D
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
B
Eaton.com/bussmannseries
7-35
7 — Medium voltage fuses
Recommended fuseclips
Description
DIN clip and stirrup
Enclosed fuseclip
Enclosed fuseclip
Enclosed fuseclip
Open fuseclip
Spring loaded open fuseclip
Clip Dimensions — in (mm)
Fuse dia. — in (mm) Fig.
A
B
ØC
D
E
1
—
—
—
—
—
1.8 (45)
2
3.5 (89)
2.5 (63)
1.8 (45)
4.4 (112)
2 (51)
2
3.75 (95) 1.98 (50) 2.01 (51) 1.19 (30) 4.54 (115)
2 4.14 (105) 2.45 (62) 3.01 (76)
5.64 (143)
3
3 (76)
See dimensions drawing
4
F
—
G
—
1.5 (38)
Catalog no.
270303
A3354745*
0.4 (10) A3354710*
A3354730*
1A0065
9078A67G04
* For single barrel applications only. Not sold in pairs.
Figure 1
Figure 2
ØC
A
D
B
26.5
6.5
G
F
E
Figure 3
Figure 4
7-36
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
Save up to 65% panel space
with Bussmann series power
distribution fuse blocks
Fuse size/
Section
class
Description
page
Quick guide
2-3
Control panel applications
1/4" dia.
Panel mount blocks 8000, 3828, 4520, 4393
4-5
Class CC and midget
Modular blocks BCM, BMM
6-7
DIN-Rail holders CHCC, CHM, NDNF1, OPM
8-13
Panel mount blocks 3743, 4421, 4515
14
Class G
Panel mount blocks BG, G
15
14mm dia.
DIN-Rail holder CH14
16
22mm dia.
DIN-Rail holder CH22
17
Modular block JM70100
18
Modular power distribution blocks JM70100_
MW_
Class H(K)/R
Modular blocks HM, RM
19-23
Modular power distribution blocks HM___MW_,
24-27
RM___MW_
Class J
DIN-Rail holders CH30J, CH60J
28
Safety J™ JT(N)600
29
Panel mount pyramid block JP
30
Modular blocks JM60_
31-32
Modular power distribution blocks JM60___MW_ 33-34
Class T
300 V panel mount blocks T300
35-36
600 V panel mount blocks T600
37-38
High speed fuses
Open center panel mount blocks BH, C5268,
39
1BS
NH fuses
DIN-Rail/panel mount blocks SD00, SD1, SD2,
40
SD3, SD4, TD00, TD1, TD2, TD3
Through-panel applications
41
5mm dia. HTB
HJL, HK, HKP, HLD
42-43
1/4" dia.
43-45
13/32" dia. HPC, HPC-D, HPD, HPF, HPG, HPM, HPS, HPS2
In-line applications
46
5mm dia. HHT
HFA, HFB, HEB-10, HHB, HR/HM, HRK
46-48
1/4" dia.
Single-pole HEC, HEG, HEH, HEJ non-breakaway
49
Class G
51-52
13/32" dia. HEB single-pole breakaway and non-breakaway
HEZ waterproof single-pole breakaway and
52
Class CC
non-breakaway
HEX, Class CC HEY dual-pole breakaway and
53-54
13/32" dia. non-breakaway
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-1
Fuse blocks and
holders
Contents
8 — Fuse blocks and holders
Quick guide
These tables list various fuse classes, sizes and voltages along with their available blocks and holders. Catalog pages are denoted
parenthetically "()" next to their catalog symbol. E.g.: BCM603 (8-6) is in Section 8, page 6.
Fuse class/
size
Catalog
symbol*
Amp
range
Fuse blocks**
Class CC
FNQ-R
KTK-R
LP-CC
Up to 30
BCM603 (8-6)
1/2-15
BG301 (8-15)
20
BG302 (8-15)
25-30
Class G
Class J
SC
DFJ
JKS
LPJ
250 V
Class H/K5
NON
600 V
Class H/K5
NOS
Class L
KLU
KRP-C
KRP-CL
KTU
250 V
Class RK1/RK5
FRN-R
KTN-R
KWN-R
LPN-RK
600 V
Class RK1/RK5
FRS-R
KTS-R
KWS-R
LPS-RK
300 V Class T
JJN
600 V Class T
JJS
DIN—Rail
holders**
In-line
holders**
Panel mount
holders**
Open center
blocks**
CHCC (8-8)
OPM-NG (8-13)
OPM-1038 (8-12)
HEY (8-53)
HEZ (8-52)
HPF-RR (8-43)
HPS-RR (8-45)
—
HEG (8-49)
HPG-EE (8-44)
HPS-EE (8-45)
HEH (8-49)
HPS-JJ (8-45)
BG303 (8-15)
HEC (8-49)
HPS-FF (8-45)
35-60
G30060 (8-15)
HEJ (8-49)
—
Up to 60
JM60030 (8-31)
JM60030-_MW_, *** (8-33)
JP60030-3 (8-30)
70-400
JM60100 (8-31)
JM60100-_MW_*** (8-33)
110-200
JM60200 (8-31
JM60200-_MW_*** (8-33)
250-400
JM60400 (8-31)
JM60400-_MW_*** (8-33)
BH-3145 (8-39)
450-600
JM60600 (8-31)
BH-3144 (8-39)
Up to 60
HM250__ (8-19)
HM250__-_MW_*** (8-24)
70-600
HM25___ (8-19)
Up to 60
HM600__ (8-19)
HM600__0-_-MW_*** (8-24)
70-600
HM60___ (8-19)
601-1200
—
CH_J (8-28)
JT(N)600_ (8-29)
—
1BS101 (8-39)
BH-0111 (8-39)
—
—
—
CH14 (8-16)
—
-—
—
—
—
—
—
—
51215 (1-pole)†
51235 (3-pole)†
—
—
—
—
Up to 60
RM250__ (8-21)
RM250__0-_MW_*** (8-26)
—
—
—
—
70-600
RM25___ (8-21)
Up to 60
RM600__ (8-21)
RM600__-_MW_*** (8-26)
—
—
—
—
70-600
RM60___0 (8-21)
—
—
Up to 600
T30___ (8-35)
250-400
T30400 (8-35)
—
BH-1133 (8-39)
—
450-600
T30600 (8-35)
BH-3144 (8-39)
Up to 60
T600__ (8-37)
—
70-100
T60100 (8-37)
110-200
T60200 (8-37)
250-400
T60400 (8-37)
BH-1133 (8-39)
450-600
T60600 (8-37)
BH-3144 (8-39)
—
—
BH-0111 (8-39)
—
—
BH-1132 (8-39)
Supplemental
13/32" x 1-1/2"
BAF
FNM
FNQ
KLM
KTK
Up to 30
BMM603 (8-6)
3743 (8-14)
4421 (8-14)
4515 (8-14)
CHM (8-8)
NDNF1-WH (8-11)
OPM-1038 (8-12)
OPM-NG (8-13)
HEB (8-51)
HEX (8-53)
HPC-D (8-43)
HPD (8-44)
HPF (8-43)
HPG (8-44)
HPM (8-44)
HPM-D (8-44)
HPS2 (8-45)
HPS (8-45)
Supplemental
13/32" x 1-3/8"
BBS
Up to 30
BMM603 (8-6)
3743 (8-14)
4421 (8-14)
4515 (8-14)
—
HEH (8-49)
HPS-L (8-45)
8-2
—
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
—
Fuse blocks and holders — 8
Fuse class/
size
Catalog
symbol*
Amp
range
Fuse blocks**
DIN—Rail
holders**
In-line
holders**
Panel mount
holders**
Open center
blocks**
1/4 x 7/8
AGW
Up to 30
—
—
HHB (8-47)
HM (8-48)
HR (8-48)
HRK (8-48)
HJL (8-42)
—
1/4 x 1
AGX
Up to 30
3828 (8-5)
4520 (8-5)
4393 (8-5)
—
HHB (8-47)
HM (8-48)
HR (8-48)
HRK (8-48)
HJL (8-42)
—
1/4 x 1-1/4
ABC
AGC
GBB
MDA
MDL
MDQ
Up to 30
S-8000 family (8-4)
—
HFA (8-46)
HFB (8-47)
HHB (8-47)
HM (8-48)
HR (8-48)
HRK (8-48)
HKP (8-42)
HTB (8-41)
HK (8-42)
HLD (8-43)
—
5x15mm
C515
C517
C518
C519
C520
Up to 7
—
—
HHT (8-46)
—
—
5x20mm
GDA
GDB
GDC
GMA
GMC
GMD
S500
S501
S505
S505H
S506
Up to 15
—
—
HHT (8-46)
HTB (8-41)
—
Fuse blocks and
holders
* Refer to data sheets for applicable fuse voltage and interrupting ratings and agency information.
** Fuse blocks and fused switches are available in a variety of pole and terminal configurations, and voltage and withstand ratings (SCCRs).Refer to data sheets for
complete catalog numbers.
*** This is a UL Listed power distribution fuse block, combining a fuse block and power distribution block into one unit.
† Not shown in this catalog. Contact customer service for details.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-3
8 — Fuse blocks and holders
S-8000 bolt-in and snap-in mount open blocks for
1/4" x 1-1/4" fuses
2011/65/EU
Ratings
Volts 300 V
Amps 30 A max*
* See catalog number tables for agency
limitations.
Agency information
•
UL Recognized, Guide IZLT2, File E14853, CSA Certified Class
6225-01, File 47235, RoHS compliant, CE
Single pole anti-rotation pin
•
Single-pole blocks may be ordered without the anti-rotational pin.
Add an “X” to the number of poles, e.g., BK/S-8000-1X.
Catalog no.†
Bolt-in mount
S-8001-(poles)-R
S-8002-(poles)-R
S-8101-(poles)-R
S-8102-(poles)-R
S-8201-(poles)-R
S-8202-(poles)-R
S-8203-1-R
Poles Terminal
S-8301-(poles)-R
Terminal
angle
UL 30
CSA 21
1
0°
40°
0°
3/16" quick-connect
40°
0°
1/4" quick-connect
40°
Side 1/4" quick-connect
1-12
Screw
—
UL 30 A
CSA 25A
0°
40°
0°
40°
0°
Side
UL 25
CSA 21
Solder
1-12
Snap-in mount
S-8001-1-SNP-R
S-8002-1-SNP-R
S-8101-1-SNP-R
S-8102-1-SNP-R
S-8201-1-SNP-R
S-8203-1-SNP-R
Max
amps
Solder
3/16" quick-connect
1
1/4" quick-connect
UL 20
CSA 13
UL 30
CSA 16
UL 20
CSA 13
UL 20
CSA 16
† Quantities for regular and bulk (BK/ prefix) catalog numbers varies with the
number of poles. Contact customer satisfaction team for details.
Mounting dimensions — in*
No. of Poles
A
B
1
—
—
2
1-1/8
5/8
3
1-3/4
1-1/4
4
2-3/8
1-7/8
5
3
2-1/2
6
3-5/8
3-1/8
7
4-1/4
3-3/4
8
4-7/8
4-3/8
9
5-1/2
5
10
6-1/8
5-5/8
11
6-3/4
6-1/4
12
7-3/8
6-7/8
A
B
* Block length varies by specific termination and mounting. See data sheet 2101
for details.
Data sheet no. 2101
8-4
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
3828 open blocks with solder terminals for
1/4" x 1" fuses
4520 and 4393 open blocks with solder terminals
for 1/4" x 1" fuses
Ratings
3828
Ratings
•
Volts 250 V
•
Amps 30 A
•
Volts 250 V
•
Amps 30 A
2011/65/EU
2011/65/EU
Catalog no.
Poles
Base width — in (mm)
3828-1
1
1/2 (12.7)
3828-2
2
1-1/8 (28.6)
3828-3
3
1-3/4 (44.5)
3828-4
4
2-3/8 (60.3)
3828-5
5
3 (76.2)
3828-6
6
3 5/8 (92.1)
3828-7
7
4-1/4 (108.0)
3828-8
8
4-7/8 (123.8)
3828-10
10
6-1/8 (155.6)
3828-12
12
7-3/8 (187.3)
Catalog no.
Description
4520
Integral clip and straight solder terminals
4393
Spare fuse block - no terminals
Dimensions — in*
1.94
0.598
0.188
1.38
4520 integral clip and straight solder terminals
1.38
Dimensions — in**
0.598
1.88
0.63
0.188
4393 spare fuse block, no terminals
0.19
1.38
* Mounting screw hole diameter is 0.147". Counterbore 0.636" diameter. Max #6
mounting screw.
Fuse blocks and
holders
** Mounting screw hole diameter is 0.147." Max #6 mounting screw.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-5
8 — Fuse blocks and holders
BCM (Class CC) and BMM (supplemental
13/32 x 1-1/2” /10x38mm) modular style fuse
blocks with optional covers.
2011/65/EU
The BCM and BMM modular
fuse blocks contain features that
add versatility, reduce labor and
enhance safety of any panel
design. Optional IP20 finger-safe
covers enhance safety with a
lockout/tagout feature along with
optional open fuse indication to
speed troubleshooting.
Volts 600 Vac/dc
•
Amps 30 A
•
SCCR up to 200 kA*
•
•
UL Listed E14853 - IZLT
•
CSA Certified 47235-6225-01
•
RoHS Compliant
13/32” x 1-1/2” BMM blocks
•
UL Recognized, E14853 - IZLT2
•
CSA Certified 47235-6225-01
•
CE
•
RoHS compliant
UL 13/32" x 1-1/2": KTK, FNQ, KLM, FNM, BAF
•
IEC 10x38mm: C10G, C10M, FWA, FWC
•
Catalog no. BRKT-ND
•
Catalog no. BRKT-NDSCRW2
•
Available in 1-, 2- and 3-pole configurations to meet stocking
requirements
•
Blocks are fully modular with a snap-together design that provides
toolless assembly of multiple pole blocks at point-of-use to reduce
inventory and save assembly time and labor
•
DIN-Rail and panel mount versatility allows one product to be used
for multiple applications, lowering inventory cost
•
Compact footprint consumes minimal panel space
•
Optional see-through cover enhances safety with IP20 finger-safe
protection, lockout/tagout capability and open circuit indication
•
Easy circuit identification with available universal marker labels for
fuse block covers
•
Tin-plated bimetallic copper fuse clips deliver superior fatigue
resistance compared to traditional spring brass
•
Terminal options to meet application needs including 1/4” spade
quick-connect terminals for faster panel assembly
Terminals for 75/90°C Cu and AL wire
BCM603-3PQ with pressure plate and
1/4" quick-connect terminals
Covers*
•
•
BMM603-3C with CVRI-CCM covers
Class CC BCM blocks
•
Class CC: LP-CC, FNQ-R, KTK-R
Features
* Limited by fuse interrupting rating
Agency information
•
Recommended DIN-Rail end stops
Ratings
•
Recommended Bussmann series fuses
Covers are included in the overall UL Listing/Recognition and CSA
Certification
* Covers sold separately in multiples of three units. Order one unit per pole.
Poles
•
1-, 2-, 3-pole units factory assembled
•
Single-pole units snap together to create desired number of poles
Flammability ratings
Terminal type
AWG range
Box lug (C)
Cu 2-14
Al 2-8
Screw (S)
Screw/quick-connect* (SQ)
Pressure plate (P)
Pressure plate/quick-connect* (PQ)
Cu 10-18
AWG
Cu 2-3
Cu 4-6
Cu 8-14
Al 2-6
Al 8
Torque
lb-in
(N•m)
50 (5.6)
45 (5.1)
35 (4.0)
50 (5.6)
40 (4.5)
10-18
20 (2.3)
•
Blocks UL 94V0, self-extinguishing
* ¼“ quick-connect terminal maximum amps dependent on female spade
connector and wire ratings.
•
Covers UL 94HB, self-extinguishing
Recommended covers†
Operating and storage temperature range
•
Blocks -40°C to +120°C
•
Non indicating covers -40°C to +120°C
•
Indicating covers -20°C to +90°C**
** Indication requires minimum 90 V and closed circuit to illuminate.
Cover catalog numbers
•
For blocks with quick-connect terminals — CVR(I)-CCM-QC
•
All other terminal options — CVR(I)-CCM
Terminal type
Box lug (C)
Cover catalog no.
Indicating
Non indicating
CVRI-CCM
CVR-CCM
Screw (S)
Screw/quick-connect (SQ)
Pressure plate (P)
Pressure plate/quick-connect (PQ)
CVRI-CCM
CVRI-CCM-QC
CVRI-CCM
CVRI-CCM-QC
CVR-CCM
CVR-CCM-QC
CVR-CCM
CVR-CCM-QC
† For use with 4 AWG max conductors.
Data sheet no. 10241
8-6
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
Catalog no.
Terminal type
10-32 Phil-slot
screw
BCM603-1S
BCM603-2S
BCM603-3S
—
—
—
Screw with
quick-connect*
BCM603-1SQ
BCM603-2SQ
BCM603-3SQ
BMM603-1SQ
BMM603-2SQ
BMM603-3SQ
Pressure plate
BCM603-1P
BCM603-2P
BCM603-3P
—
—
—
Pressure plate with
quick-connect*
BCM603-1PQ
BCM603-2PQ
BCM603-3PQ
BMM603-1PQ
BMM603-2PQ
BMM603-3PQ
Box lug
BCM603-1C
BCM603-2C
BCM603-3C
BMM603-1C
BMM603-2C
BMM603-3C
Poles
1
2
3
1
2
3
—
BCCMM603-3SQ
—
BCCMM603-3PQ
—
3
Fuse/class
CC
CC
CC
10x38 (13/32”x1-1/2”)
10x38 (13/32”x1-1/2”)
10x38 (13/32”x1-1/2”)
3-Pole control circuit transformer block 2-pole
CC with 1-pole 10x38mm (13/32” x 1-1/2”)
* 1/4“ quick-connect terminal maximum amps dependent on female spade connector and wire ratings.
Dimensions — mm (in)
33
1.3
95
3.7
40
1.6
21
.8
77 10
3.0 .4
4
.2
20
.8
16
.6
20
.8
39
1.6
59
2.3
33
1.3
Fuse blocks and
holders
41
1.6
60
2.4
Data sheet no. 10241
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-7
8 — Fuse blocks and holders
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, midget and PV fuses
Bussmann series CH DIN-Rail fuse
holders are for UL Class CC and
midget fuses, and IEC 10x38mm
fuses. They are available with and
without indication in 1-, 2- and 3-pole
IP20 finger-safe versions. A variety of
accessories extends their application
flexibility and they may be ganged
together to meet specific application
requirements.
2011/65/EU
Ratings
•
•
Volts
• 600 V (or less) UL
•
UL 94V0, self-extinguishing
Storage and operating temperature
•
-4°F (-20°C) to +194°F (90°C) indicating
•
-4°F (-20°C) to +248°F (120°C) non-indicating
Features
•
High SCCR rated, UL Listed Class CC holder with optional open
fuse indication for 600 V and 48 Vdc (see catalog number table for
details)
•
Enhanced safety with IP20 finger-safe construction
•
UL Recognized midget and IEC 10x38mm holders with factory
assembled neutral pole option
•
690 V (or less) IEC
•
Agency ratings up to 1000 Vdc for use with PV fuses.
•
1000 Vdc (or less) photovoltaic (PV)
•
Available remote PLC fuse indication module
•
Wiring flexibility with terminals rated for use with 75°C or 90°C
solid, stranded and fine stranded wire, and fork terminals and
comb busbars. (Use any higher temperature insulations at the
90°C ampacity with appropriate derating.)
•
Complete range of UL Listed and high SCCR rated one- and threephase finger-safe comb busbars and power feed lugs
•
Optional hex head terminal screw makes it easier to achieve
necessary torque values
Amps
• 30 A UL
•
•
Flammability
32 A IEC
SCCR
• 33 kA photovoltaic
•
200 kA RMS Sym. (CHCC, CHM*)
* CHM SCCR is fuse interrupting rating dependent.
Agency information
•
CHCC, CHM; UL Listed Guide IZLT, Recognized Guide IZLT2, File
E14853
•
CHPV, UL Listed to 4248-19, Guide IZMR, File E348242
•
CSA File 47235, CHPV and CHM - Class 6225-30, CHCC - Class
6225-01
•
IEC 60269-2 (CHM, CHPV)
•
CCC
•
RoHS compliant
•
CE
Fuse access door
accommodates 4mm
lockout/tagout device
IP20 finger-safe
construction
Optional open
fuse indicator
Captive phil-slot or
optional hex head
terminal screw
Fork lug
terminal
Mounting: 35mm DIN-Rail
Wire range
Toolless
ganging for
multiple poles
•
75°C and 90°C Cu
•
18-4 AWG (0.8-21.1mm2)
•
Solid, stranded and fine stranded*
Toolless 35mm
DIN-Rail
mounting
* See data sheet 10430 for application details.
Wire strip
gauge
Dual conductor
rated box lug
terminal
Terminals
•
Single or dual conductors
•
Comb busbar
•
Terminal screws
•
Standard phil-slot
•
Optional hex head (order by adding “-H” suffix to the catalog
number, e.g., CHM1DU-H)
Torque
•
30 lb-in (3.4 N•m) maximum
Data sheet no. 10430
8-8
Gang multiple poles to meet application requirements using kit catalog number
JV-L (gangs up to four poles).
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
UL midget and IEC 10x38
Catalog no.†
Volts and amps
With indication*
CHM1DIU
Without indication
CHM1DU
CHM2DIU
CHM2DU
CHM3DIU
CHM3DU
CHM4DIU
CHM4DU
CHM1DNIU
CHM1DNU
CHM3DNIU
CHM3DNU
UL
IEC
600 V/
30 A
690 V/
32 A
Agency marks
Poles
1
UR, CSA,
IEC 60269-2,
CCC
2
3
4
IEC 60269-2
UR, CSA,
48 Vdc/
IEC 60269-2,
32 A
CCC
690 V/
IEC 60269-2
32 A
1 + neutral
3 + neutral
CHM1DI-48U
—
48 Vdc/
30 A
—
CHM1DNXU
—
CHM1DCIU
CHM1DCU
1
CHM2DCIU
CHM2DCU
2
CHM3DCIU
CHM3DCU
CHM4DCIU
CHM4DCU
600 Vac,
1000 Vdc,
30 A
690 V,
32 A
UR, CSA,
IEC 60269-2
SCCR
Recommended
Bussmann series fuses
BAF, BAN,
FNM, FNQ,
200 kA
FWA, FWC,
RMS Sym.††
KLM, KTK,
AGU, C10G_, C10M_
1
N/A
N/A
600/690 V
BAF, BAN,
FNM, FNQ,
200 kA
FWA, FWC,
RMS Sym.†† KLM, KTK,
33 kA DC
AGU, C10G_, C10M_,
1000 Vdc
PV-(amp)A10F,
PV10M-(amp)
3
4
UL Class CC
Catalog no. †
With indication*
CHCC1DIU
CHCC2DIU
CHCC3DIU
CHCC1DI-48U
Without indication
CHCC1DU
CHCC2DU
CHCC3DU
—
Volts / amps
600 V/30 A
Agency marks
UL, CSA, CCC
48 Vdc/30 A
Poles
1
2
3
1
SCCR
Poles
SCCR
200 kA
RMS Sym.
33 kA DC
Recommended
Bussmann series fuses
LP-CC,
FNQ-R,
KTK-R
UL and IEC photovoltaic
Catalog no. †
With indication*
Without indication
CHPV1IU
CHPV1U
CHPV2IU
CHPV2U
Volts / amps
1000 Vdc/30 A
Agency marks
UL, CSA, , UL
4248-18, IEC
60269-1, CCC
1
33 kA DC
2
Recommended
Bussmann series fuses
PV-(amp)A10F,
PV10M-(amp)
† Available with optional hex head terminal screws. To order, add “-H” suffix to the desired catalog number.
†† SCCR is limited to the interrupting rating of the installed fuse or 200 kA, which ever is less.
* All models require 90 V minimum for illumination, except CHM1DI-48U that requires 15 V minimum.
Dimensions — mm (in)
70 (2.756)
52.5 (2.067)
35 (1.378)
61.83 (2.434)
18.59
(0.732)
Fuse blocks and
holders
17.5
(0689)
73.88
(2.909)
9
(0.354)
42.58 (1.676)
7
(0.276)
52.83 (2.08)
83.19 (3.275)
Data sheet no. 10430
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-9
8 — Fuse blocks and holders
Power feed terminals
Accessories
PWR1PLP — Single-phase, low profile power feed terminal
Ratings
Power feed terminals
1- and 3-phase comb busbars
Contact safety covers
•
Volts 1000 V
•
Amps 115 A
•
Wire range 1/0-10 AWG Cu, max torque
50 lb-in (5.6 N•m)
•
Wire rating 60°C†
PWR35MM — 35mm2 three-phase power feed terminal for three-
phase busbars
Ratings
Comb busbars
•
Volts 1000 V
•
Amps 115 A
•
Wire range 1/0-10 AWG Cu, max
torque 50 lb-in (5.6 N•m)
•
Wire rating 60°C†
PWR50MM — 50mm2 direct feed power terminal
•
Easily distribute power in single-or three-phase systems
•
Flexible cut-to-length busbars do not compromise the finger-safe
protection (requires using endcaps)
•
Volts 1000 V
•
100 kA SCCR when protected by a max 200 A Class J fuse
•
Amps 115 A
•
Single-phase busbars rated to 1000 Vdc and 100 A
•
•
Three-phase busbars rated to 600 V and 100 A
Wire range 1-14 AWG Cu, max torque
35 lb-in (3.9 N•m)
•
Power feed terminals for single-and three-phase systems
•
Wire rating 75°C†
Ratings
† Higher temperature rated wire may be used with appropriate derating.
Agency information
Comb busbar safety covers and end caps
FSCVR
UL 508, File E195399
•
Spare comb busbar pin safety protection
covers (used to cover exposed pins on
comb busbars). Sold in quantity of ten
strips of five covers each. (FSCVR comes
with five covers on a strip. Minimum order
is 10 strips or 50 safety covers total.)
Pitch 17.8mm
Ratings
Volts
•
•
600 V max. (three-phase)
•
1000 Vdc/600 Vac max. (single-phase)
ECAP1P
•
Amps 100 A max.
End cap for single-phase comb busbars.
Sold in quantity of fifty.
•
SCCR
ECAPMP
•
10 kA (default)
•
100 kA (with upstream Class J max 200 A fuses)
Catalog no.
BB1P100M3
BB1P100M6
BB1P100M9
BB1P100M12
BB1P100M15
BB1P100M57
BB3P100M6
BB3P100M9
BB3P100M12
BB3P100M15
BB3P100M57
Phase
Single
Three
No. of pins
3
6
9
12
15
57 pin cuttable
6
9
12
15
57 pin cuttable
Endcaps*
End cap for three-phase comb busbars. Sold
in quantity of fifty.
Accessory catalog numbers
Catalog no.
No**
PWR50MM
Yes*
ECAP1P
ECAPMP
Description
Single-phase low-profile power feed
terminal (115 A, 1000 V)
35mm2 power feed terminal for
three-phase busbar (115 A, 1000 V)
50mm2 direct power feed terminal
(1000 V)
Single-phase busbar endcap
Three-phase comb busbar end cap
FSCVR
Spare comb busbar pin safety
protection covers
Yes*
PWR1PLP
PWR35MM
No**
Carton quantity
10
10
10
50
50
10 strips of five
covers each, total
50 individual covers
* With endcaps assembled. If cut to length, order additional endcaps separately.
** Order end caps separately, ECAP1P for single-phase busbars and ECAPMP for
three-phase busbars.
Data sheet no. 10430
8-10
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
PLC fuse monitor
Local indication
Catalog no. CH-PLC2
The Bussmann series resettable PLC fuse monitor
permits easy integration with a Programmable Logic
Controller (PLC) or other monitoring and control
equipment. Signals up to three-phases. Includes 0.11"
(2.8mm) quick-connects for power, signal and ground
connections.
Ratings
•
Signal output to PLC*
•
•
Flammability rating UL 94V0
+24 Vdc, 10 mA max
Output signals
•
Wiring
•
Digital 0 Vdc (low), 24 Vdc max (high)
•
0 Vdc Low – fuse is good
•
24 Vdc High – fuse has opened
•
Mounts on the left side of the fuse holder and mechanically
interlocks with the fuse holder switch handle with hardware
provided
Degree of protection IP20 finger-safe
•
UL 508 Listed, Guide NKCR, File E170168
•
cULus, Guide NKCR7, File E170168 to Canadian Standard 22.2,
No. 14-13
Emissions and immunity testing
•
IEC 60947-1: Voltage Switchgear and Control Gear
•
IEC 61000-6-2: Electromagnetic Compatibility (EMC)
• IEC 61000-4-2: Electrostatic Discharge Immunity - Test at level
3 (6 kV-Contact Discharge) and level 2 (4 kV-Air Discharge)
•
Minimum circuit voltage required across the CH holder is 100 Vac
for the remote indication device to operate
Installation
* When the fuse opens, the output signal is sent
high and will remain high until the unit is reset.
Agency information
For power, signal and ground connections use shielded twisted
pair 22-24 AWG (0.34-0.25mm2) 300 V rated wire.
Minimum circuit voltage
•
•
Two distinct LEDs indicate unit power (green) and open fuse (red).
Open fuse LED is resettable upon fuse replacement and the actuating the reset switch
IEC 61000-4-3: Electromagnetic Compatibility - Radiated, Radiofrequency, Electromagnetic Field Immunity test at level x (20
V/m)
Storage and operating temperature
•
-4°F (-20°C) to +167°F (+75°C)
PLC programming
•
The CH-PLC2 signal line is designed to provide a digital input to a
PLC I/O card
•
Programmable Logic Control program must be written to properly
interpret the input signal to the PLC
•
The PLC program should check for consecutive high signals before
taking action on a critical process
•
IEC 61000-4-4: Electromagnetic Compatibility - Testing and
Measurement Techniques at level 3 (± 2kV - Power Port and
±1 kV - I/O Ports)
To order
•
IEC 61000-4-5: Electromagnetic Compatibility - Surge Immunity
test at level 4 (±4 kV)
Data sheet no. 10430
•
IEC 61000-4-6: Immunity to Conducted Disturbances at level 3 (10 V)
•
Specify catalog number CH-PLC2 (one unit)
NDNF1-WH single-pole DIN-Rail mount fuse
holding terminal block for 13/32" x 1-1/2"
(10x38mm) fuses
Ratings: 600 volts / 30 amps
Fuse blocks and
holders
Wire range 8-22 AWG Cu
Torque rating 2.03 N•m (18 lb-in)
Mounting 35mm DIN-Rail or C-rail
Fuse pullers
•
PF1-WH (white)
•
PF1-BK (black)
Max operating temperature 105°C
Circuit jumper catalog no. JF1 for 2 circuits
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-11
8 — Fuse blocks and holders
Optima™ fuse holder module and module with
disconnect switch
Features
•
Padlockable with finger-safe terminals for safety. Qualified as IP20
per IEC 60529
•
Cam-action handle for easy fuse module removal, offered with
Class CC rejection clips or 13/32 x 1-1/2 (10x38mm) clips to meet
global needs
•
Wire ready with 35mm DIN-Rail or screw panel mounting (#8
screw, 1-1/4” long) saves installation time
•
Fuse indication lights with optional communications for remote
fuse status available. See data sheet for additional wiring details.
OPM-1038(R)(C) without switch
OPM-1038(R)SW(C) with switch
OPM-1038(R)(C) is a 3-pole
modular fuse holder 13/32" x 1-1/2"
(10x38mm) and Class CC fuses.
OPM-1038(R)SW(C)* is a 3-pole
load break modular fuse holder
and disconnect switch for 13/32"
x 1-1/2" (10x38mm) and Class CC
fuses.
Typical applications
•
Industrial control
•
Process control systems
•
Automated warehouse systems
* Recommend using the UL 98 Listed CCP2 disconnect switch. See page 11-2.
•
Individual control circuits
Ratings
Dimensions — in (mm)
Both the OPM-1038(R)SW(C) and OPM-1038(R)
(C) are available with optional communications for
interfacing with programmable logic controllers.
0.57 (15)
•
See catalog numbers table
3.22 (82)
2T1
Agency information
3.74
(95)
See catalog numbers table
1.65
(42)
Flammability rating UL 94V0
0.23 (6)
0.27 (7)
5L3
0.74 (19)
0.31 (8)
3.6 (91)
0.50 (13)
Counication
port
3L2
0.41 (11)
0.224
(6)
OPM-1038(R)SW(C) switch horsepower ratings
3-phase volts
240
480
600
HP
5
10
15
3.60
(91)
1.312
(33)
Panel mount
hole pattern
1.86
(47)
Panel mount
hole pattern
Counication
port
OPM-1038
0.57 (15)
Recommended Bussmann series fuses
3.74
(95)
Counication
port
3.17
(81)
•
Class CC; LP-CC, FNQ-R, KTK-R
•
UL 13/32" x 1-1/2"; KTK, FNQ, KLM, FNM, BAF
•
IEC 10x38mm; C10G, C10M, FWA, FWC
0.23 (6)
0.224
(6)
1.86
(47)
Panel mounting
hole pattern
3.60 (91)
1.312
(33)
Panel mounting
hole pattern
Physical characteristics
•
4T2
1.76
(45)
6T3
BUSS
•
IL1
3.17
(81)
5.72 (145)
4.25 (108)
Small size matches 45mm IEC starter width
Accepts Cu AWG stranded 8-18 and solid 10-18 wire
•
OPM-1038(R)SW(C ) switch version requires a handle and shaft for
through the door operation
1.38
(35)
2T1
4T 2
6T3
1L1
BUSS
•
0.43
(11)
0.50
(13)
0.44
(11)
Counication
port
3L2
0.27 (7)
5L3
0.74 (19)
1.76
(45)
0.31 (8)
OPM-1038SW
Catalog no.
Without
communication
With
communication
Fuse type/size
Volts
Amps
SCCR
Agency information
OPM with disconnect switch
OPM-1038SW
OPM-1038SWC*
Non-rejection, 13/32” x 1-1/2
or 10x38mm
600 Vac UL/CSA,
660 V IEC
30 A UL,
32 A IEC
**
UL 508 Recognized, Guide NLRV2, File E161278,
CSA Certified, C22.2 No. 39, Class 6225-01, File
47235, IEC 60947-3, CE
OPM-1038RSW
OPM-1038RSWC*
Class CC
600 Vac UL/CSA
30 A
100 kA
UL 508 Listed, Guide NLRV, File E161278, CSA
Certified, C22.2 No. 39, Class 6225-01, File
47235,IEC 60947-3, CE
OPM without switch
OPM-1038
OPM-1038C*
Non-rejection, 13/32” x 1-1/2
or 10x38mm
600 Vac UL/CSA,
660 V IEC
30 A UL,
32 A IEC
**
UL Recognized, Guide IZLT2, File E114853, CSA
Certified, C22.2 No. 39, Class 6225-01, File 47235,
IEC 60269-2-1, CE
OPM-1038R
OPM-1038RC*
Class CC
600 Vac UL/CSA
30 A
200 kA
UL Listed, Guide IZLT2, File E114853, CSA Certified,
C22.2 No. 39, Class 6225-01, File 47235, IEC 602692-1, CE
* With communication not CE.
** Rating varies depending on fuse used in module; 10 kA default, higher SCCR requires testing and certification.
Data sheets no. 1002 (OPM-1038) and 1103 (OPM-1038SW)
8-12
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
OPM-NG Optima three-pole overcurrent
protection module
Fuse holder AWG wire range (75°C Cu only)*
•
18-12, single/dual, torque 15 lb-in (1.7 N•m)
The OPM-NG is a 3-pole
protection module that's
available in versions for Class
CC, and UL 13/32" x 1-1/2"
supplemental and 10x38mm IEC
fuses.
•
10-8, single/dual, torque 20 lb-in (2.2 N•m)
* Dual wire with same gauge and type
Input power terminal wire range (AWG)
Torque lb-in (N•m)
Wire
Catalog numbers
•
OPM-NG-SC3 (Class CC)
•
OPM-NG-SM3 (UL/IEC)
Solid
2011/65/EU
Stranded
Ratings
•
•
•
•
600 Vac (or less) UL and CSA
•
690 Vac (or less) IEC
Amps
30 A UL and CSA
•
32 A IEC
Connector
Screw clamp
20 (2.2)
15 (1.7)
Single 14-2 (1.5-25)
Dual 14-6 (1.5-10)
Single 14-2 (1.5-25)
Dual 12-6 (2.5-10)
Flammability rating
Volts
•
AWG (mm2) range
•
UL V2
Dimensions — mm (in)
SCCR
•
200 kA Class CC
•
UL supplemental and IEC same as fuse IR up to 200 kA max
Agency information
•
UL; OPM-NG-SC3 UL Listed, UL 4248, File E14853, Guide IZLT.
OPM-NG-SM3, UL Recognized, UL 4248, File E14853, Guide
IZLT2. CSA Certified, C22.2 No. 4248, Class 6225-01, File 47235.
IEC 60947-3 Utilization Category AC20B, CE
Recommended Bussmann series fuses
•
Class CC: LP-CC, FNQ-R, KTK-R
•
UL 13/32" x 1-1/2": KTK, FNQ, KLM, FNM, BAF
•
IEC 10x38mm: C10G, C10M, FWA, FWC
•
45mm width matches IEC starters
•
35mm DIN-Rail or panel mount. Max. screw size #8 (M4).
•
Pressure plate terminations with dual-wire rated terminals (see
wire table) and optional auxiliary contacts
•
Integrated collapsible handle and fuse carrier cannot be removed
from holder base
•
Padlockable and IP20 finger-safe to IEC 60529
Fuse blocks and
holders
Features
Typical applications
•
Mass produced control systems
•
Process control systems
•
Automated warehouse systems
•
Individual control circuits
Data sheet no. 1109
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-13
8 — Fuse blocks and holders
3743 open, add-on block for 13/32" x 1-1/2"
(10x38mm) fuses
4421 and 4515 open single pole blocks for 13/32"
x 1-1/2" (10x38mm) fuses.
Single pole blocks lock into each
other and can be added at any
time. Each has a single end
barrier.
Ratings
Ratings
3743 open, add-on block
2011/65/EU
•
Volts 250 V
•
Amps 30 A
2011/65/EU
Agency information
Volts 600 V
•
Amps 30 A
4421 solder terminal
CE
Agency information
•
UL Recognized, Guide IZLT2,
File E14853, CE
4515 screw terminal
3742 end barrier only
Catalog no.
Catalog no.
Description
3743
Add-on fuse block
3742
End barrier
3723
Block and end barrier marking strip (length 9-3/8")
Terminals
Base width
4421
Solder
5/8" (16mm)
4515
Screw
3/4" (19mm)
Dimensions — in*
2.5
Dimensions — in*
2.56
0.323
0.897
0.19
0.25
1.125
0.78
4421 solder terminals
0.144
2.56
1.34
1.29
3742
2.56
1.125
0.25
1.63
0.897
0.84
0.19
0.50
* Mounting screw hole diameter 0.147" (3.7mm). Counterbore diameter 0.636"
(8mm). Max. #6 mounting screw.
4515 with screw terminals
* Mounting screw hole diameter 0.147". Counterbore diameter 0.312". Max. #6
mounting screw.
Data sheet no. 2104
8-14
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
BG and G Class G fuse blocks
Dimensions — in
1-30 A
Bussmann series open style BG
and G fuse blocks are available in
1-, 2- and 3-pole configurations and
offer a variety of terminal options.
1.53
1.22
0.36
Ratings
•
0.425
0.425
0.36
Volts
0.2
3
•
600 V (0-20 A)
•
480 V (25-60 A)
1.5
2011/65/EU
•
Amps up to 60 A
•
SCCR 100 kA RMS Sym.
0.86
0.169 x 0.210
1.63
Agency information
2.38
0.765
35-60 A
1.38
•
UL Listed, 4248-5, Guide IZLT, File E14853
•
1-60 A CSA Certified, C22.2 No. 39, Class 6225-01, File 47235
•
RoHS compliant
0.22
0.5
0.47
0.84
Mounting
0.29 Dia. hole
0.38 C'bore
•
Panel
•
DIN-Rail with DRA-1 adapter
4.25
2.125
Catalog no./terminal
Amps
Up to 15
20
25-30
35-60
AWG
wire
range/
type
Screw
w/ quickconnect*
Pressure
plate w/
quickconnect*
BG3011SQ
Box lug
Box lug w/
retaining
clip
Poles
BG3011PQ
BG3011B
—
1
BG3012SQ
BG3012PQ
BG3012B
—
2
BG3013SQ
BG3013PQ
BG3013B
—
3
BG3021SQ
BG3021PQ
BG3021B
—
1
BG3022SQ
BG3022PQ
BG3022B
—
2
BG3023SQ
BG3023PQ
BG3023B
—
3
BG3031S
BG3031P
BG3031B
—
1
BG3032S
BG3032P
BG3032B
—
2
BG3033S
BG3033P
BG3033B
—
3
—
—
—
G30060-1CR
1
—
—
—
G30060-2CR
2
—
—
G30060-3C**
G30060-3CR
3
10-14 Cu
10-18 Cu
6-14 Cu (1-30 A)
2-14 Cu (35-60 A)
2-8 Al (35-60 A)
2-14 Cu
2-8 Al
0.94
1.78
35-60 A 3-Pole G30060-3C and G30060-3CR
1.41
0.53
1.69
0.22 Dia. hole
3.56
1.78
2.75
Fuse blocks and
holders
* Quick-connect rated 20 A max.
** Not RoHS compliant.
Accessories
Catalog no.†
Description
PF1-WH
Fuse cover/puller
PF1-BK
Color
White
Black
† Order one cover per pole.
Data sheet no. 1106
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-15
8 — Fuse blocks and holders
CH14 modular fuse holders for 14x51mm fuses
Bussmann series 14x51mm modular fuse holders are suitable
for use with standard cylindrical fuses and high speed FW type
ferrule fuses. With DIN-Rail or panel mount flexibility, their compact
dimensions helps reduce space, allows for higher cable bending
radius. Low watts loss and wide range of accessories make them
ideally suited for most industrial applications.
Ratings
•
Volts
• 690 Vac/750 Vdc (IEC)
•
•
•
700 Vac (UL)
Amps
• 50 A
SCCR
• 120 kA AC
•
•
2011/65/EU
10 kA DC (PV only)
Power acceptance
• 5 W to IEC 60269-2 (rated)
Shown with optional microswitch
6.2 W (max)
Catalog no.
Poles
Description
CH141DNXU
1
Neutral holder
CH141DU
1
CH142DU
2
CH143DU
3
CH144DU
4
CH141DNU
2
1-pole holder+ neutral
CH143DNU
4
3-pole holder+ neutral
CH141DIU
1
CH142DIU
2
CH143DIU
3
CH144DIU
4
CH141DNIU
2
1-pole holder + neutral + neon indicator
CH143DNIU
4
3-pole holder + neutral + neon indicator
CH141DMSU-F
1
CH143DMSU-F
3
UL/IEC holders
Fuse holder
Fuse holder with neon indicator
Holder + microswitch
CH143DNMSU-F
4
3-pole holder+ neutral + microswitch
•
Rated impulse withstand voltage (Uimp)
• 6 kV
CHPV141DI-48U
1
Holder with LED indicator
•
Microswitch (IEC)
• 250 Vac / 5 A
CHPV141U
1
CHPV141IU
1
Holder with neon indicator
Agency information
CHPV142U
2
Holder
CHPV142IU
2
Holder with neon indicator
•
•
IEC 60269-1 and 2, UL Listed File E14853, CCC (UL/IEC)
•
IEC 60269-1 and 2, UL Listed File E348242, CCC (PV)
•
RoHS compliant
1 to 4
CH14-CTP
Protection index
Holder
Accessories
Catalog no.
JV-L
CH14-SPS
CH14-TPS
Poles
•
1500 Vdc photovoltaic holders
Description
Multi-pole connector kit; one kit gangs up to 4 poles
Microswitch for CH141D(I)U; 1 NO + 1 NC changeover type
Microswitch for CH143D(I)U; 1 NO + 1 NC changeover type
IP20 protection accessory for terminals with 10mm2 or less
cable
IP20
Temperature range
•
•
Storage
•
-40°C to +80°C (CH14D)
•
-20°C to +90°C (CHPV14 indicating)
•
-20°C to +120°C (CHPV14 non-indicating)
Operating
•
-20°C to +70°C (CH14D)
•
-20°C to +90°C (CHPV14 indicating)
•
-20°C to +120°C (CHPV14 non-indicating)
Features
•
Ventilation zones optimized for better heat dissipation
•
Built-in padlocking facility and IP20 degree of protection
•
Photovoltaic version rated at 1500 Vdc (IEC only) for use with gPV
fuses
Data sheet no. 10080
8-16
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
CH22 modular fuse holders for 22x58mm fuses
Bussmann series 22x58mm modular fuse holders are suitable
for use with standard cylindrical fuses and high speed FW type
ferrule fuses. Their compact dimensions help reduce space and
allow for higher cable bending radius. Low watts loss and wide
range of accessories make them ideally suited for most industrial
applications.
Ratings
•
•
•
•
Volts
•
690 Vac/1000 Vdc (IEC)
•
700 Vac (UL)
Amps
CH221DNXU
1
Neutral holder
CH221DU
1
CH222DU
2
CH223DU
3
CH224DU
4
CH221DIU
1
CH222DIU
2
CH223DIU
3
CH224DIU
4
CH221DNU
2
1-pole holder + neutral
CH223DNU
4
3-pole holder + neutral
Fuse holder
Holder with neon indicator
CH221DNIU
2
1-pole holder+ neutral + neon indicator
•
100 A (UL)
CH223DNIU
4
3-pole holder+ neutral + neon indicator
CH221DMSU-F
1
Holder with microswitch (pre-breaking/fuse
operation)
CH223DMSU-F
3
3-pole holder + microswitch (pre-breaking/
fuse operation)
CH223DNMSU-F
3
3-pole holder + neutral + microswitch (prebreaking/fuse operation)
CH221DI-48U
1
1-pole holder with LED Indicator
SCCR
•
120 kA AC
•
50 kA DC
Power acceptance
9.5 W to IEC 60269-2
Rated impulse withstand voltage (Uimp)
6 kV
Microswitch (IEC)
•
Accessories
Catalog no.
JV-L
CH22-SPS
CH22-TPS
250 Vac / 5 A
Agency information
•
Description
125 A (IEC)
•
•
Poles
•
•
•
2011/65/EU
Catalog no.
IEC 60269-1 and 2, UL Listed File E14853, CCC, RoHS compliant
CH22-CTP
Description
Multi-pole connector kit; one kit gangs up to 4 poles
Microswitch for CH221D(I)U; 1 NO + 1 NC changeover type
Microswitch for CH223D(I)U; 1 NO + 1 NC changeover type
IP20 protection accessory for terminals with 10mm2 or less
cable
Poles
1 to 4
Protection index
•
IP20 Finger-safe*
* Available protection accessory CH22-CTP for use with conductors of 10mm2 or
less
Wire size (Cu only)
•
2.5-70mm2
•
Storage -40°C to +80°C
•
Operating -20°C to +70°C
Fuse blocks and
holders
Temperature range
Features
•
Compact dimensions
•
Ventilation zones optimized for a better heat dissipation
•
Built-in padlocking facility
•
IP20 degree of protection
•
Flexibility to mount on DIN Rail and screw mounting
•
Toolless DIN-Rail mounting, improves ease of use and reduces
installation time and costs
Data sheet no. 10115
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-17
8 — Fuse blocks and holders
JM70100 700 V modular fuse blocks and modular
power distribution fuse blocks for 22x58mm IEC
fuses
Ratings
The patented JM70100 fuse
block products are available for
22x58mm gG, aM and select
high speed fuses as either a fuse
block or power distribution fuse
block. The power distribution fuse
blocks eliminate the need for a
separate power distribution block,
and require up to 78 percent
less panel space while reducing
installation time and labor by an
average of 36 percent.
2011/65/EU
•
Volts 700 V
•
Amps 100 A
•
SCCR 200 kA RMS Sym.
Agency information
Fuses not
included.
•
Blocks; UL Recognized, Guide IZLT2, File E14853, CSA Component
acceptance 47235 — 6225-01
•
Covers UL Listed, Guide JDVS, File E58836
•
RoHS compliant
Poles
All blocks are equipped with a fuse clip reinforcing spring to
minimize temperature rise while maintaining reliable surface contact
between the fuse and clip over the block's service life.
Rated for applications up to 700 V and 100 amps, their modular
design allows for assembly of multiple pole configurations at the
point of use. These blocks can also be ordered as factory configured
2- and 3-pole versions.
The versatile 35mm DIN-rail or panel mount capability allows using
the same block for multiple applications and reducing inventory cost.
Optional IP20 finger-safe covers enhance electrical safety with a
lockout/tagout feature and can be ordered with or without open fuse
indication to speed troubleshooting.
•
1-, 2-, 3-pole
•
Single-pole units snap together to create desired number of poles
Flammability ratings
•
Blocks: UL 94V0, self-extinguishing
•
Covers: UL 94HB, self-extinguishing
Operating and storage temperature range
•
Blocks -40°C to +120°C
•
Covers; Non-indicating -40°C to +120°C, Indicating -20°C to +90°C
The high 200 kA SCCR rating helps achieve a higher assembly shortcircuit current rating (SCCR) for compliance with NEC® sections
110.10, 409.110(4), 409.22, 440.4(B), 670.3(A)(4) and 670.5.
Conductors
Easy circuit identification with available universal labels for blocks
and covers.
* Conductors with higher temperature rating may be used, but at their 75°C
ampacity.
Fuse class
Accessories
•
IEC 22x58mm gG, gL, aM and aR and gR high speed fuses
Catalog no.
Optional
covers*
Fuse amp
range
•
•
75°C Cu/Al*
Optional IP20 finger-safe covers in indicating and non-indicating
versions. Order one for each pole
Lineside conductors and torque
Poles
Conductors
Loadside conductors and torque
Size (AWG)
N•m (lb-in)
2-3
5.6 (50)
Conductors
Size (AWG)
N•m (lb-in)
2-3
5.6 (50)
Fuse blocks
JM70100-1CR
JM70100-2CR
1
CVR-J-60060
CVRI-J-60060**
Up to 100
JM70100-3CR
2
Cu 2-14
Al 2-8
3
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
2-3
5.6 (50)
Cu 2-14
Al 2-8
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
Cu (1) 8
3.4 (30)
Power distribution fuse blocks
JM70100-1MW14
JM70100-2MW14
1
CVR-J-60060
CVRI-J-60060**
JM70100-3MW14
Up to 100
2
Cu 2-14
Al 2-8
3
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
Cu (1) 8-18
Cu (2) 12-18
Al (1) 8 Str
Al (1) 10 Sol
Cu (1) 10-18
2.8 (25)
Cu (2) 12-18
3.4 (30)
Al (1) 8-10
3.4 (30)
* Covers sold separately, one cover per pole.
** Open fuse indication requires 90 volts minimum and closed circuit to operate.
Data sheet no. 10496
8-18
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
HM modular 250 V and 600 V Class H(K) fuse
blocks
Class H(K) modular fuse blocks
enhance safety for any panel or
electrical system design and are
available for the full Class H(K)
fuse amp range.
2011/65/EU
All blocks are available as snaptogether single-pole versions for
toolless assembly of multiple
poles at point of use, or as
factory configured 2-, and 3-pole
versions to meet stocking
requirements.
Ratings
•
Volts
•
250 V
•
600 V
•
Amps up to 600
•
SCCR 10 kA RMS Sym.
Agency information
All blocks are equipped with a
fuse clip reinforcing spring to
minimize temperature rise while
maintaining reliable surface
contact between the fuse and
clip over the block's service life.
•
Blocks;UL Listed, Guide IZLT and IZLT7, File E14853, CSA Certified
47235-6225-01, CE
•
RoHS Compliant
•
Covers; UL Listed, Guide JDVS, File E58836, CSA Certified 472356225-01 (30 and 60 A)
•
RoHS Compliant
Poles
30 and 60 amp ferrule fuse blocks save panel space with the
smallest width dimension on the market and feature DIN-Rail and
panel mount versatility.
100 to 600 amp knifeblade fuse blocks feature phase barriers
between poles for additional safety with up to four mounting holes
per pole to increase installation flexibility. All knifeblade blocks meet
UL creep and clearance requirements for Industrial Power Circuits
(UL 508 and UL 845), with the 200 to 600 amp blocks meeting the
higher UL creep and clearance requirements for Power Distribution
Standards (UL 98, UL 67, UL 489, UL 891 and UL 869A)
All blocks are available with optional IP20 finger-safe high clarity,
see-through covers for inspecting wire terminations or thermography
measurements without removal. All covers enhance safety by
featuring probe holes for easier, safer testing and a lockout/tagout
capability. These covers also have optional open fuse indication to
speed troubleshooting.
Easy circuit identification is available for 30 and 60 amp blocks and
covers with universal marker labels.
•
1-, 2-, 3-pole units factory assembled
•
Single-pole units snap together to create desired number of poles
Flammability ratings
•
Blocks: UL 94V0, self-extinguishing
•
Covers: UL 94HB, self-extinguishing
Operating and storage temperature range
•
Blocks -40°C to +120°C
•
Covers; Non-Indicating -40°C to +120°C, Indicating -20°C to
+90°C*
* Indication requires minimum 90 V and closed circuit to illuminate.
Conductors
•
See catalog numbers for details and torque specifications
Class K 30 and 60 amp blocks and covers
Fuse
amp
range
Catalog no./terminal type
Poles
Box lug/slot
screw
Box lug/hex
screw
Optional covers*
10-32 Phil-slot
screw
Screw with
quick-connect
Pressure plate
Indicating**
Nonindicating
CVRI-RH-25030
CVR-RH-25030
CVRI-RH-25060
CVR-RH-25060
CVRI-RH-60030
CVR-RH-60030
CVRI-RH-60060
CVR-RH-60060
up to 30
35 to 60
1
HM25030-1CR
HM25030-1CHR
HM25030-1SR
HM25030-1QR
HM25030-1PR
2
HM25030-2CR
HM25030-2CHR
HM25030-2SR
HM25030-2QR
HM25030-2PR
3
HM25030-3CR
HM25030-3CHR
HM25030-3SR
HM25030-3QR
HM25030-3PR
1
HM25060-1CR
HM25060-1CHR
2
HM25060-2CR
HM25060-2CHR
—
—
—
3
HM25060-3CR
HM25060-3CHR
HM60030-1CR
HM60030-1CHR
600 volt blocks
1
up to 30
35 to 60
HM60030-1SR
HM60030-1PR
2
HM60030-2CR
HM60030-2CHR
HM60030-2SR
HM60030-2PR
3
HM60030-3CR
HM60030-3CHR
HM60030-3SR
HM60030-3PR
1
HM60060-1CR
HM60060-1CHR
2
HM60060-2CR
HM60060-2CHR
3
HM60060-3CR
HM60060-3CHR
—
—
—
* Covers sold separately, one cover per pole.
** Open fuse indication requires 90 volts minimum and closed circuit to operate.
Data sheet no. 10487
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-19
Fuse blocks and
holders
250 volt blocks
8 — Fuse blocks and holders
Class H 100 to 600 amp knifeblade blocks and covers
Fuse amp
range
Optional covers*
Poles
Catalog no.
Non-indicating
Conductors***
Indicating**
Solid and stranded
Fine stranded
Torque
N•m (lb-in)
—
Cu 1-3 AWG
6.2 (55)
1/0-3 AWG; (2) Cu 4-6 AWG
Cu 4-6 AWG
5.6 (50)
2 4-6 AWG; (2) Cu 8 AWG
Cu 8 AWG
5.1 (45)
8 AWG; (2) Cu 10-14 AWG
—
4.5 (40)
Cu 10-14 AWG; Al 10-12 AWG
—
4.0 (35)
250kcmil-1 AWG
Cu 3/0-1 AWG
42 (375)
2-6 AWG; (2) Cu 2-6 AWG
Cu 2-6 AWG
31 (275)
250 volt blocks
1
70-100
110-200
225-400
HM25100-1CR
2
HM25100-2CR
3
HM25100-3CR
1
HM25200-1CR
2
HM25200-2CR
3
HM25200-3CR
1
HM25400-1CR
2
HM25400-2CR
3
HM25400-3CR
CVR-RH-25100
CVR-RH-25200
CVRI-RH-25100
CVRI-RH-25200
600kcmil
CVR-RH-25400
CVRI-RH-25400
500kcmil-4 AWG
(2) Cu 3/0 - 4 AWG
57 (500)
51 (450)
N/A
57 (500)
(2) Al 3/0 - 4 AWG
450-600
1
HM25600-1CR
2
HM25600-2CR
3
HM25600-3CR
CVR-RH-25600
CVRI-RH-25600
2 (2) 500kcmil-4 AWG
34 (300)
N/A
51 (450)
600 volt blocks
70-100
110-200
225-400
450-600
1
HM60100-1CR
2
HM60100-2CR
CVR-RH-60100
CVRI-RH-60100
—
Cu 1-3 AWG
6.2 (55)
1/0-3 AWG; (2) Cu 4-6 AWG
Cu 4-6 AWG
5.6 (50)
2 4-6 AWG; (2) Cu 8 AWG
Cu 8 AWG
5.1 (45)
8 AWG; (2) Cu 10-14 AWG
—
4.5 (40)
3
HM60100-3CR
Cu 10-14 AWG; Al 10-12 AWG
—
4.0 (35)
1
HM60200-1CR
250kcmil-1 AWG
Cu 3/0-1 AWG
42 (375)
2
HM60200-2CR
2-6 AWG; (2) Cu 2-6 AWG
Cu 2-6 AWG
31 (275)
3
HM60200-3CR
1
HM60400-1CR
600kcmil
2
HM60400-2CR
500kcmil-4 AWG
3
HM60400-3CR
1
HM60600-1CR
2
HM60600-2CR
3
HM60600-3CR
CVR-RH-60200
CVR-RH-60400
CVRI-RH-60200
CVRI-RH-60400
(2) Cu 3/0 - 4 AWG
57 (500)
51 (450)
N/A
57 (500)
(2) Al 3/0 - 4 AWG
CVR-RH-60600
CVRI-RH-60600
2 (2) 500kcmil-4 AWG
34 (300)
N/A
51 (450)
*
Covers sold separately.
** Open fuse indication requires 90 volts minimum and closed circuit to operate.
*** Ratings for copper and aluminum conductors except where otherwise noted.
Class K 30 and 60 amp block terminals and conductors
Terminal type
AWG type/range AWG
2-3
75°C
4-6
Cu 2-14,
8
AL 2-8
10-14
Box lug
10-32 Phil-slot screw
Screw with quick-connect* 75/90°C
Cu 10-18
Pressure plate
10-18
Torque
N•m (lb-in)
5.6 (50)
5.1 (45)
4.5 (40)
4.0 (35)
Recommended DIN-Rail stops for 30 and 60 amp blocks
Catalog no.
BRKT-ND
BRKT-NDSCREW2
Description
DIN-Rail end stops
2.3 (20)
* 3/16” quick-connect terminal maximum amps dependent on female spade connector and wire ratings.
Data sheet no. 10487
8-20
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
RM modular 250 V and 600 V Class R fuse blocks
Ratings
Class R modular fuse blocks
enhance safety for any panel or
electrical system design and are
available for the full Class R fuse
amp range.
•
2011/65/EU
All blocks are available as snaptogether single-pole versions for
toolless assembly of multiple
poles at point of use, or as
factory configured 2-, and 3-pole
versions to meet stocking
requirements.
All blocks are equipped with a
fuse clip reinforcing spring to
minimize temperature rise while
maintaining reliable surface
contact between the fuse and
clip over the block's service life.
30 and 60 amp ferrule fuse blocks save panel space with the
smallest width dimension on the market and feature DIN-Rail and
panel mount versatility.
100 to 600 amp knifeblade fuse blocks feature phase barriers
between poles for additional safety with up to four mounting holes
per pole to increase installation flexibility. All knifeblade blocks meet
UL creep and clearance requirements for Industrial Power Circuits
(UL 508 and UL 845), with the 200 to 600 amp blocks meeting the
higher UL creep and clearance requirements for Power Distribution
Standards (UL 98, UL 67, UL 489, UL 891 and UL 869A).
All blocks are available with optional IP20 finger-safe high clarity,
see-through covers for inspecting wire terminations or thermography
measurements without removal. All covers enhance safety by
featuring probe holes for easier, safer testing and a lockout/tagout
capability. These covers also have optional open fuse indication to
speed troubleshooting.
Easy circuit identification is available for 30 and 60 amp blocks and
covers with universal marker labels.
Volts
•
250 V
•
600 V
•
Amps up to 600
•
SCCR 200 kA RMS Sym.
Agency information
•
Blocks; UL Listed Guide IZLT and IZLT7, File E14853, CSA Certified
47235-6225-01, CE
•
Covers; UL Listed Guide JDVS, File E58836, CSA Certified 472356225-01 (30 and 60 A)
•
RoHS Compliant
Poles
•
1-, 2-, 3-pole units factory assembled
•
Single-pole units snap together to create desired number of poles
Flammability ratings
•
Blocks: UL 94V0, self-extinguishing
•
Covers: UL 94HB, self-extinguishing
Operating and storage temperature range
•
Blocks -40°C to +120°C
•
Covers; Non-Indicating -40°C to +120°C, Indicating -20°C to
+90°C*
* Indication requires minimum 90 V and closed circuit to illuminate.
Conductors
•
See catalog numbers for details and torque specifications
Finger grips on cover
for easy removal
Optional see-through, snap-on
cover for easy visual inspection
Optional open fuse indication
speeds troubleshooting
Vent slots improve cooling*
Standard fuse clip reinforcing
spring reduces temperature rise
Toolless interlocking modular design
for easy point-of-use assembly
Lockout/tagout feature
improves safety
Probe holes for easy testing
without removing cover
*No fuse derating necessary.
DIN-rail or panel mounting on each
pole provides installation flexibility
for units rated up to 60 amps
Data sheet no. 10489
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-21
Fuse blocks and
holders
Standard phase barriers
for additional safety
8 — Fuse blocks and holders
Class R 30 and 60 amp blocks and covers
Catalog no./terminal type
Fuse amp
range
Optional covers*
Box lug/
slot screw
Box lug/
hex screw
10-32
Phil-slot screw
screw with
quick-connect
Pressure plate
1
RM25030-1CR
RM25030-1CHR
RM25030-1SR
RM25030-1QR
RM25030-1PR
2
RM25030-2CR
RM25030-2CHR
RM25030-2SR
RM25030-2QR
RM25030-2PR
3
RM25030-3CR
RM25030-3CHR
RM25030-3SR
RM25030-3QR
RM25030-3PR
1
RM25060-1CR
RM25060-1CHR
2
RM25060-2CR
RM25060-2CHR
—
—
—
3
RM25060-3CR
RM25060-3CHR
1
RM60030-1CR
RM60030-1CHR
RM60030-1SR
RM60030-1PR
2
RM60030-2CR
RM60030-2CHR
RM60030-2SR
RM60030-2PR
3
RM60030-3CR
RM60030-3CHR
RM60030-3SR
1
RM60060-1CR
RM60060-1CHR
2
RM60060-2CR
RM60060-2CHR
3
RM60060-3CR
RM60060-3CHR
Poles
Indicating**
Nonindicating
CVRI-RH-25030
CVR-RH-25030
CVRI-RH-25060
CVR-RH-25060
CVRI-RH-60030
CVR-RH-60030
CVRI-RH-60060
CVR-RH-60060
250 volt blocks
up to 30
35 to 60
600 volt blocks
up to 30
35 to 60
—
—
RM60030-3PR
—
* Covers sold separately, order one cover per pole.
** Open fuse indication requires 90 volts minimum and closed circuit to operate.
Class R 30 and 60 amp block terminals and conductors
Terminal type
AWG type/range
Box lug
75°C
Cu 2-14,
AL 2-8
10-32 Phil-slot screw
Pressure plate
Screw with quick-connect*
75/90°C
Cu 10-18
AWG
2-3
4-6
8
10-14
Torque
N•m (lb-in)
5.6 (50)
5.1 (45)
4.5 (40)
4.0 (35)
10-18
2.3 (20)
* 3/16" quick-connect terminal maximum amps dependent on female spade
connector and wire ratings.
Recommended DIN-Rail stops for 30 and 60 amp blocks
Catalog no.
BRKT-ND
BRKT-NDSCREW2
Description
DIN-Rail end stops
Data sheet no. 10489
8-22
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
Class R 100 to 600 amp knifeblade blocks and covers
Fuse amp
range
Optional covers*
Poles
Catalog no.
Non-indicating
Conductors***
Indicating**
Solid and stranded
Fine stranded
Torque
N•m (lb-in)
—
Cu 1-3 AWG
6.2 (55)
1/0-3 AWG; (2) Cu 4-6 AWG
Cu 4-6 AWG
5.6 (50)
2 4-6 AWG; (2) Cu 8 AWG
Cu 8 AWG
5.1 (45)
8 AWG; (2) Cu 10-14 AWG
—
4.5 (40)
Cu 10-14 AWG; Al 10-12 AWG
—
4.0 (35)
250kcmil-1 AWG
Cu 3/0-1 AWG
42 (375)
2-6 AWG; (2) Cu 2-6 AWG
Cu 2-6 AWG
31 (275)
250 volt blocks
1
70-100
110-200
225-400
450-600
RM25100-1CR
CVR-RH-25100
CVRI-RH-25100
2
RM25100-2CR
3
RM25100-3CR
1
RM25200-1CR
2
RM25200-2CR
3
RM25200-3CR
1
RM25400-1CR
600kcmil
2
RM25400-2CR
500kcmil-4 AWG
3
RM25400-3CR
1
RM25600-1CR
2
RM25600-2CR
3
RM25600-3CR
CVR-RH-25200
CVR-RH-25400
CVRI-RH-25200
CVRI-RH-25400
57 (500)
51 (450)
N/A
(2) Cu 3/0 - 4 AWG
57 (500)
(2) Al 3/0 - 4 AWG
CVR-RH-25600
CVRI-RH-25600
34 (300)
2 (2) 500kcmil-4 AWG
N/A
51 (450)
—
Cu 1-3 AWG
6.2 (55)
1/0-3 AWG; (2) Cu 4-6 AWG
Cu 4-6 AWG
5.6 (50)
2 4-6 AWG; (2) Cu 8 AWG
Cu 8 AWG
5.1 (45)
8 AWG; (2) Cu 10-14 AWG
—
4.5 (40)
Cu 10-14 AWG; Al 10-12 AWG
—
4.0 (35)
250kcmil-1 AWG
Cu 3/0-1 AWG
42 (375)
2-6 AWG; (2) Cu 2-6 AWG
Cu 2-6 AWG
31 (275)
600 volt blocks
1
70-100
110-200
225-400
450-600
RM60100-1CR
CVR-RH-60100
CVRI-RH-60100
2
RM60100-2CR
3
RM60100-3CR
1
RM60200-1CR
2
RM60200-2CR
3
RM60200-3CR
1
RM60400-1CR
600kcmil
2
RM60400-2CR
500kcmil-4 AWG
3
RM60400-3CR
1
RM60600-1CR
2
RM60600-2CR
3
RM60600-3CR
CVR-RH-60200
CVR-RH-60400
CVRI-RH-60200
CVRI-RH-60400
57 (500)
51 (450)
N/A
(2) Cu 3/0 - 4 AWG
57 (500)
(2) Al 3/0 - 4 AWG
CVR-RH-60600
CVRI-RH-60600
34 (300)
2 (2) 500kcmil-4 AWG
N/A
51 (450)
Fuse blocks and
holders
* Covers sold separately, order one cover per pole.
** Open fuse indication requires 90 volts minimum and closed circuit to operate.
*** Ratings for copper and aluminum conductors except where otherwise noted.
Data sheet no. 10489
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-23
8 — Fuse blocks and holders
HM modular 250 V and 600 V Class H(K) power
distribution fuse blocks
2011/65/EU
The patented 30 and 60 amp
250 V and 600 V Class H(K)
power distribution fuse blocks
use fewer wire connections to
reduce watts loss and overall
operating temperature of the
panel, while simplifying panel
layout. Available in ratings up
to 400 amps, they use up to
57 percent less panel space
while lowering inventory costs,
and reducing installation time
and labor by an average of 33
percent.
250 volt 60
amp modular
blocks.
Agency information
•
Blocks: UL Listed, Guide IZLT, File E14853, CSA Certified 47235 6225-01
•
Covers: UL Listed, Guide JDVS, File E58836
•
RoHS compliant
Poles
600 volt 30
and 60 amp
modular
blocks.
•
1-, 2-, 3-pole
•
Single-pole units snap together to create desired number of poles
Flammability ratings
All blocks are equipped with a fuse clip reinforcing spring to
minimize temperature rise while maintaining reliable surface contact
between the fuse and clip over the block's service life.
Available as snap-together one-pole units for toolless assembly of
multiple poles at point of use or factory configured 2- and 3-pole
units to meet popular stocking requirements.
Optional see-through cover enhances safety with IP20 finger-safe
protection, lockout/tagout capability and open circuit indication.
•
Blocks: UL 94V0, self-extinguishing
•
Covers: UL 94HB, self-extinguishing
Operating and storage temperature range
•
Blocks: -40°C to +120°C
•
Covers: Non-indicating -40°C to +120°C, Indicating -20°C to +90°C
Conductors
•
75°C Cu/Al (unless otherwise noted)
DIN-Rail and panel mount versatility allows one product to be used
for multiple applications without incurring additional inventory cost.
Accessories
Ratings
•
Optional IP20 finger-safe covers in indicating and non-indicating
versions. Order one for each pole
•
DIN-Rail end stops, catalog numbers BRKT-ND or
BRKT-NDSCRW2
•
Volts
•
250 V
•
600 V
•
Amps up to 60 A
•
SCCR 10 kA RMS Sym.
Available two-port
lineside lug for easy
daisy-chain wiring
configuration
Optional see-through, snap-on
cover for easy visual inspection
Finger grips on cover
for easy removal
Lockout/tagout feature
improves safety
Probe holes for easy testing
without removing cover
Standard phase barriers
for additional safety
Vent slots improve cooling
(no fuse derating necessary)
Optional open fuse indication
speeds troubleshooting
Toolless interlocking modular design
for easy point-of-use assembly
DIN-Rail or panel mounting on each
pole provides installation flexibility
Standard fuse clip reinforcing
spring reduces temperature rise
Multi-port loadside lug
for power distribution to
multiple branch circuit
connections
Ports on power distribution lugs rated for
dual-wire application, increasing the number
of branch circuit connections (see catalog
number table for details)
Marker label provision
for easy circuit
identification
Data sheet no. 10490
8-24
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
Optional
covers*
Catalog no.
Fuse
amp
range
Lineside (conductors per port)
Poles
Conductors
Ports/
pole
Loadside (conductors per port)
Torque AWG
N•m
(lb-in)
2-4
5.6 (50)
6-10
4.5 (40)
Conductors
Ports/
pole
Torque
AWG
N•m
(lb-in)
2-3
5.6 (50)
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
Cu (1) 8
3.4 (30)
Cu (1) 10-14
2.8 (25)
250 volt blocks
1
HM25060-1MW12
HM25060-2MW12
2
N/A
Cu 2-14
Al 2-8
2
HM25060-3MW12
3
12-14
1.7 (15)
HM25060-1MW14
1
2-3
5.6 (50)
HM25060-2MW14
CVR-RH-25060
35-60
CVRI-RH-25060**
HM25060-3MW14
2
Cu 2-14
Al 2-8
1
3
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
HM25060-1MW24†
1
2-4
5.6 (50)
HM25060-2MW24†
2
6-10
4.5 (40)
12-14
1.7 (15)
N/A
HM25060-3MW24
Cu 2-14
Al 2-8
2
3
†
Cu 2-14
Al 2-8
1
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
Cu (2) 12-14
3.4 (30)
Al (1) 8-10
3.4 (30)
Cu (1) 8
3.4 (30)
Cu (1) 10-14
2.8 (25)
Cu (2) 12-14
3.4 (30)
Al (1) 8-10
3.4 (30)
600 volt blocks
HM60030-1MW14†
1
2-3
5.6 (50)
HM60030-2MW14†
2
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
Al (1) 8-10
3.4 (30)
2-4
5.6 (50)
2-3
5.6 (50)
6-10
4.5 (40)
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
Cu (1) 8
3.4 (30)
Cu (1) 10-14
2.8 (25)
Cu (2) 12-14
3.4 (30)
N/A
up to 30
Cu 2-14
Al 2-8
1
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
Cu (1) 8
3.4 (30)
Cu (1) 10-14
2.8 (25)
Cu (2) 12-14
3.4 (30)
HM60030-3MW14
3
HM60060-1MW12
1
HM60060-2MW12
2
HM60060-3MW12
3
12-14
1.7 (15)
HM60060-1MW14
1
2-3
5.6 (50)
HM60060-2MW14
2
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
Al (1) 8-10
3.4 (30)
2-4
5.6 (50)
Cu (1) 8
3.4 (30)
Cu (1) 10-14
2.8 (25)
Cu (2) 12-14
3.4 (30)
Al (1) 8-10
3.4 (30)
†
CVR-RH-60060
35-60
CVRI-RH-60060**
HM60060-3MW14
3
HM60060-1MW24†
1
HM60060-2MW24
†
HM60060-3MW24†
2
Cu 2-14
Al 2-8
Cu 2-14
Al 2-8
Cu 2-14
Al 2-8
2
1
2
3
6-10
12-14
4.5 (40)
1.7 (15)
Cu 2-14
Al 2-8
1
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
Fuse blocks and
holders
* Order one cover per pole.
** With open fuse indication. 90 V minimum and closed circuit required for illumination.
*** Dual wire rated lugs with same wire size and stranding.
† Rated for use with 75°C/90°C Cu/Al conductors.
Data sheet no. 10490
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-25
8 — Fuse blocks and holders
RM modular 250 V and 600 V Class R power
distribution fuse blocks
2011/65/EU
The patented 30 and 60 amp
250 V and 600 V Class R power
distribution fuse blocks use
fewer wire connections to
reduce watts loss and overall
operating temperature of the
panel, while simplifying panel
layout. Available in ratings up
to 400 amps, they use up to
57 percent less panel space
while lowering inventory costs,
and reducing installation time
and labor by an average of 33
percent.
High 200 kA SCCR helps achieve a higher assembly short-circuit
current rating (SCCR) for compliance with NEC sections 110.10,
409.110(4), 409.22, 440.4(B), 670.3(A)(4) and 670.5.
All blocks are equipped with a fuse clip reinforcing spring to
minimize temperature rise while maintaining reliable surface contact
between the fuse and clip over the block's service life.
Available as snap-together one-pole units for toolless assembly of
multiple poles at point of use or factory configured 2- and 3-pole
units to meet popular stocking requirements.
Agency information
•
Blocks; UL Listed Guide IZLT, File E14853, CSA Certified 47235 —
6225-01
•
Covers; UL Listed Guide JDVS, File E58836
•
RoHS compliant
Poles
•
1-, 2-, 3-pole
•
Single-pole units snap together to create desired number of poles
Flammability ratings
•
Blocks: UL 94V0, self-extinguishing
•
Covers: UL 94HB, self-extinguishing
Operating and storage temperature range
•
Blocks: -40°C to +120°C
•
Covers; Non-indicating -40°C to +120°C, Indicating -20°C to +90°C
Conductors
•
75°C Cu/Al (unless otherwise noted)
Optional see-through cover enhances safety with IP20 finger-safe
protection, lockout/tagout capability and open circuit indication.
Accessories
DIN-Rail and panel mount versatility allows one product to be used
for multiple applications without incurring additional inventory cost.
•
Optional IP20 finger-safe covers in indicating and non-indicating
versions. Order one for each pole.
•
DIN-Rail end stops, catalog numbers BRKT-ND or
BRKT-NDSCRW2.
Ratings
•
Volts
•
250 V
•
600 V
•
Amps up to 60 A
•
SCCR 200 kA RMS Sym.
Available two-port lineside
lug for easy daisy-chain
wiring configuration
Optional see-through, snap-on
cover for easy visual inspection
Standard phase barriers
for additional safety
Toolless interlocking modular design
for easy point-of-use assembly
Standard fuse clip reinforcing
spring reduces temperature rise
Multi-port loadside lug
for power distribution to
multiple branch circuit
connections
Ports on power distribution lugs rated for
dual-wire application, increasing the number
of branch circuit connections (see catalog
number table for details)
Finger grips on cover
for easy removal
Lockout/tagout feature
improves safety
Probe holes for easy testing
without removing cover
Vent slots improve cooling
(no fuse derating necessary)
Optional open fuse indication
speeds troubleshooting
DIN-Rail or panel mounting on each
pole provides installation flexibility
Marker label provision
for easy circuit
identification
Data sheet no. 10491
8-26
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
Optional
covers*
Catalog no.
Fuse
amp
range
Lineside (conductors per port)
Poles
Conductors
Ports/
pole
Loadside (conductors per port)
Torque AWG
N•m
(lb-in)
Conductors
Ports/
pole
Torque
AWG
N•m
(lb-in)
250 Volts
RM25060-1MW12
1
2-4
5.6 (50)
2-3
5.6 (50)
RM25060-2MW12
2
6-10
4.5 (40)
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
Cu (1) 8
3.4 (30)
Cu (1) 10-14
2.8 (25)
Cu (2) 12-14
3.4 (30)
Al (1) 8-10
3.4 (30)
N/A
Cu 2-14
Al 2-8
2
RM25060-3MW12
3
12-14
1.7 (15)
RM25060-1MW14
1
2-3
5.6 (50)
RM25060-2MW14
CVR-RH-25060
35 - 60
CVRI-RH-25060**
RM25060-3MW14
2
Cu 2-14
Al 2-8
1
3
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
†
RM25060-1MW24
1
2-4
5.6 (50)
RM25060-2MW24†
2
6-10
4.5 (40)
12-14
1.7 (15)
N/A
RM25060-3MW24
Cu 2-14
Al 2-8
2
3
†
Cu 2-14
Al 2-8
1
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
Cu (1) 8
3.4 (30)
Cu (1) 10-14
2.8 (25)
Cu (2) 12-14
3.4 (30)
Al (1) 8-10
3.4 (30)
600 Volts
RM60030-1MW14†
1
2-3
5.6 (50)
RM60030-2MW14†
2
4-6
5.1 (45)
8
4.5 (40)
10-14
2-4
6-10
4.5 (40)
N/A
up to 30
RM60030-3MW14
3
RM60060-1MW12
1
RM60060-2MW12
2
†
Cu 2-14
Al 2-8
Cu 2-14
Al 2-8
1
2
3.4 (30)
2.8 (25)
Cu (2) 12-14
3.4 (30)
4.0 (35)
Al (1) 8-10
3.4 (30)
5.6 (50)
2-3
5.6 (50)
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
Cu (1) 8
3.4 (30)
Cu (1) 10-14
2.8 (25)
RM60060-3MW12
3
RM60060-1MW14
1
2-3
5.6 (50)
RM60060-2MW14
2
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
2-4
5.6 (50)
CVR-RH-60060
35-60
CVRI-RH-60060**
RM60060-3MW14
Cu 2-14
Al 2-8
1
3
RM60060-1MW24†
RM60060-2MW24
†
RM60060-3MW24†
1
2
Cu 2-14
Al 2-8
2
3
6-10
12-14
Cu 2-14
Al 2-8
1
1.7 (15)
4.5 (40)
1.7 (15)
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
Cu (2) 12-14
3.4 (30)
Al (1) 8-10
3.4 (30)
Cu (1) 8
3.4 (30)
Cu (1) 10-14
2.8 (25)
Cu (2) 12-14
3.4 (30)
Al (1) 8-10
3.4 (30)
Order one cover per pole.
With open fuse indication. 90 V minimum and closed circuit required for illumination.
Dual wire rated lugs with same wire size and stranding.
Rated for use with 75°C/90°C Cu/Al conductors.
Fuse blocks and
holders
*
**
***
†
12-14
Cu (1) 8
Cu (1) 10-14
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
Data sheet no. 10491
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-27
8 — Fuse blocks and holders
CH _ _ J _ Class J fuse holder
Features
The CH_J_ Class J fuse holders
are available in 30 and 60 amp
ratings featuring IP20 finger-safe
construction that can be either
DIN-Rail or panel mounted.
Available as factory configured
1-, 2- or 3-pole holders they
are available with optional
open fuse indication to speed
troubleshooting.
•
Choice of local fuse indication; easyID™ viewing window (for
seeing indicator on LPJ-SPI indicating fuse) or neon lamp
•
Versatile 1-, 2- and 3-pole versions for 0-30 A and 35-60 A fuses
with dual wire rated connections simplify wiring
•
Improved electrical safety with IP20 finger-safe construction with
lock-out/tag-out feature. 3-phase fuse extraction assures all phases
are opened for service work
•
Flexible panel/35mm DIN-Rail mounting
Dimensions — mm
Ratings
•
Volts 600 V (or less)
•
Amps
•
•
30 A
•
60 A
Fuse amps
Up to 30 A
30 A
60 A
SCCR 200 kA
35-60 A
Agency information
•
Poles
W
1
32
2
64
3
96
1
40
2
80
3
120
D
H
70
115
83
125
UL Listed, Guide IZLT, File E14853, UL 4248/CSA 22.2 No. 4248.P,
CE
Conductors
•
Single 1-18 AWG and dual 3-18 AWG Cu solid and stranded
conductors
Terminal torque ratings
•
10-18 AWG 24 lb-in
•
1-8 AWG 35 lb-in
Storage and operating temperature range*
•
-20°C to +75°C
* For fuse selection on applications above or below 25ºC, consult derating charts
in the Bussmann Division publication no. 3002 “Selecting Protective Devices”
(SPD).
Flammability rating UL 94V0
Catalog no.
Without indication*
With indication**
Poles
CH30J1
CH30J1I
1
CH30J2
CH30J2I
2
CH30J3
CH30J3I
3
CH60J1
CH60J1I
1
CH60J2
CH60J2I
2
CH60J3
CH60J3I
3
Amps
Volts
(AC/DC)
IP20
fingersafe
AWG Cu wire range
Padlockable
Mounting
30
600
Yes
Single 1-18, dual 3-18
Yes
35mm DIN/ panel
60
600
Yes
Single 1-18, dual 3-18
Yes
35mm DIN/ panel
* Local fuse indication 6 amps and above possible using Bussmann series LPJ_SPI permanent indication fuses.
** Neon indication non-fuse dependent, minimum voltage 90 V.
Data sheet no. 2144
8-28
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
JT(N)60030 and JT(N)60060 Safety J™ modular
finger-safe Class J fuse holders
Typical applications
•
Industrial controls
The Bussmann series Safety J™
modular fuse holders are available
in indicating and non-indicating
versions. Finger-safe construction
improves electrical safety, while
modular construction permits
dovetailing the required number
of poles* at point of use. DIN-Rail
mount provides for easy installation.
30 A version
Optional open fuse indication
speeds troubleshooting.
•
Process controls
•
Small horsepower VFDs
Dimensions — in (mm)
60 A version
1.14
(29.0)
1.05
(26.7)
Slot
* JT(N)60030 cannot be dovetailed to JT(N)60060.
Din-rail
Ratings
•
Volts 600 Vac
•
Amps
•
0.07
(1.8)
MOUNTING
Shown without fuse pullout cover
•
Up to 30 A (JT(N)60030)
•
35--60 A (JT(N)60060)
1.23
(31.2)
2.42
(61.3)
2.75
(69.9)
3.60
(91.4)
SCCR
•
200 kA RMS Sym.
•
300 kA self certified using Bussmann series LPJ_SP fuses
2.52
(64.1)
Agency information
•
Listed to UL 4248: Guide IZLT, File 14853, CSA Certified: Class
6225-01, File 47235. IP20 per IEC 60529, CE
JT(N)60030
Catalog numbers and conductor information
Catalog no.
Holder Non75°C Cu conductor
amps indicating Indicating* size (AWG) and type
8-18 stranded, single
or dual**
30
JT60030
JTN60030
10-18 solid, single or
dual**
4-14 stranded or solid,
60
JT60060
JTN60060 single
8-10 stranded, dual**
Terminal
torque
N•m (lb-in)
2.26 (20)
1.31
(33.3)
1.25
(31.8)
Slot
Din-rail
5.1 (45)
* Indication non-fuse dependent, minimum 90 V.
** Dual wire applications must use conductors of the same size and type.
0.10
(2.6)
MOUNTING
Shown without fuse pullout cover
3.10
(78.7)
Dimensions — in (mm)
1.52
(38.1)
2.96
(75.2)
4.40
(111.7)
JT60030, JTN60030 Flammability rating: UL 94V0
Fuse blocks and
holders
3.06
(77.7)
Open fuse indication
Min. voltage: 90 V; neon lamp “ON” when fuse opens, voltage
source and current path are present.
JT(N)60060
Features
•
300 kA SCCR with Bussmann series LPJ_SP fuses
•
Rapid, flexible 35mm DIN-Rail mounting
•
One piece interlocking design for assembling multiple pole blocks
reduces inventory costs
•
Removable fuse carrier allows fuse replacement away from base
while maintaining finger-safe rating
Data sheet no. 1152
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-29
8 — Fuse blocks and holders
JP pyramid style 3-pole Class J fuse block
The Bussmann series JP (pyramid)
open fuse block provides a means
of mounting a three-pole 30 amp
Class J fuse block with a footprint
that is narrower than traditional
solutions. See catalog numbers
for terminals and conductor
information.
Ratings
Volts 600 V
Amps 30 A
SCCR 200 kA RMS Sym.
Agency information
•
UL Listed, UL 4248, Guide IZLT, File E14853, CSA Certified, C22.2
No. 39, Class 4225-04, File 47235, CE
Flammability rating UL 94V0
Mounting
•
Panel
•
35mm DIN-Rail*
* To order DIN-Rail, specify catalog number DRL35MMLO (1 meter).
Catalog no.
JP60030-3PR
JP60030-3CR
JP60030-3COR
JP60030-3PRA
JP60030-3CRA
JP60030-3CORA
Mounting
Panel DIN-Rail*
Yes
No
Yes
No
Yes
No
No
Yes
No
Yes
No
Yes
Terminals/AWG wire range/
type
Pressure plate Box lug
10-14 Cu
—
—
2-14 Cu/Al
—
2-14 Cu
10-14 Cu
—
—
2-14 Cu/Al
—
2-14 Cu
* Requires adapter, order catalog number JPA-3.
Dimensions — in
DIN-Rail mounting screw 8 inches (203mm) apart
End stops prevent block movement when changing fuses
4.0 max.
(101)
3.75
(95)
1.88
(48)
1.19 (30)
2.38 (60)
3.29 (84)
2.78
3.06
(71)
(78)
3.13
(80)
JPA-3 adaptor for symmetrical mounting on a 35mm DIN-Rail
Data sheet no. 1108
8-30
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
JM modular Class J fuse blocks
Ratings
2011/65/EU
Class J modular fuse blocks
enhance safety for any panel or
electrical system design and are
available for the full Class J fuse
amp range.
All blocks are available as
single-pole versions that snap
together at point of use, or as
factory configured 2-, and 3-pole
versions.
All blocks are equipped with a
fuse clip reinforcing spring to
minimize temperature rise while
maintaining reliable surface
contact between the fuse and
clip over the block's service life.
•
Volts 600 V
•
Amps up to 600 A
•
SCCR 200 kA RMS Sym.
Agency information
30 and 60 amp blocks are DIN-Rail and
panel mount. Optional covers increase
safety.
•
Blocks; UL Listed E14853 — IZLT and IZLT7, CSA Certified 472356225-01, CE, RoHS Compliant
•
Covers; UL Listed E58836 - JDVS, CSA Certified 47235-6225-01
(30 and 60 A), RoHS Compliant
Poles
100 to 600 amp blocks are panel mount.
Optional covers increase safety.
Ferrule fuse blocks up to 60 amps have the smallest width
dimension on the market and feature DIN-Rail or panel mount
versatility. Easy circuit identification is available for 30 and 60 amp
blocks and covers with universal marker labels.
Knifeblade fuse blocks from 100 to 600 amps feature phase barriers
for additional safety with up to four mounting holes per pole for
increased installation flexibility. All knifeblade blocks meet UL creep
and clearance requirements for Industrial Power Circuits (UL 508 and
UL 845). The 200 to 600 amp blocks also meet the higher UL creep
and clearance requirements for Power Distribution Standards (UL 98,
UL 67, UL 489, UL 891 and UL 869A)
All blocks have optional IP20 finger-safe high clarity, seethrough covers for inspecting wire terminations or thermography
measurements without removal. All covers enhance safety by
featuring probe holes for easier, safer testing and a lockout/tagout
capability. These covers also have optional open fuse indication to
speed troubleshooting.
Optional see-through, snap-on
cover for easy visual inspection
•
1-, 2-, 3-pole units factory assembled
•
Single-pole units snap together to create desired number of poles
Flammability ratings
•
Blocks: UL 94V0, self-extinguishing
•
Covers: UL 94HB, self-extinguishing
Operating and storage temperature range
•
Blocks -40°C to +120°C
•
Covers; non-indicating -40°C to +120°C, indicating -20°C to +90°C*
* Indication requires minimum 90 V and closed circuit to illuminate.
Conductors
•
See catalog numbers for details and torque specifications.
Finger grips on cover
for easy removal
Standard phase barriers
for additional safety
Marker label provision
for easy circuit
identification (applies to
30 and 60 A blocks only)
Vent slots improve cooling
(no fuse derating necessary)
Optional open fuse indication
speeds troubleshooting
Lockout/tagout feature
improves safety
DIN-Rail or panel mounting on each
pole provides installation flexibility
(DIN-Rail mounting applies to 30
and 60 A blocks only)
Probe holes for easy testing
without removing cover
Standard fuse clip reinforcing
spring reduces temperature rise
Data sheet no. 10488
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-31
Fuse blocks and
holders
Toolless interlocking modular design
for easy point-of-use assembly
8 — Fuse blocks and holders
30 and 60 amp blocks and covers
Fuse amp
range
Catalog no./terminal type
Poles Box lug/slot screw Box lug/hex screw
1
JM60030-1CR
JM60030-1CHR
10-32 Phil-slot screw
JM60030-1SR
Pressure plate
JM60030-1PR
up to 30
2
JM60030-2CR
JM60030-2CHR
JM60030-2SR
JM60030-2PR
3
JM60030-3CR
JM60030-3CHR
JM60030-3SR
JM60030-3PR
1
JM60060-1CR
JM60060-1CHR
2
3
JM60060-2CR
JM60060-3CR
JM60060-2CHR
JM60060-3CHR
—
—
35 to 60
Optional covers*
Indicating**
Non-indicating
CVRI-J-60030
CVR-J-60030
CVRI-J-60060
CVR-J-60060
* Covers sold separately, one cover per pole.
** Open fuse indication requires 90 volts minimum and closed circuit to operate.
30 and 60 amp block terminals and conductors
Terminal type
AWG type/range
Box lug
75°C
Cu 2-14,
Al 2-8
10-32 Phil-slot
screw
75/90°C
Cu 10-18
AWG
2-3
4-6
8
10-14
Torque N•m (lb-in)
5.6 (50)
5.1 (45)
4.5 (40)
4.0 (35)
10-18
2.3 (20)
Pressure plate
100 to 600 amp knifeblade blocks and covers
Optional covers*
Fuse amp
range
70-100
110-200
225-400
450-600
Poles
Catalog no.
1
JM60100-1CR
2
JM60100-2CR
Non-indicating
CVR-J-60100-M
Conductors***
Indicating**
CVRI-J-60100-M
Solid and stranded
Fine stranded
—
Cu 1-3 AWG
6.2 (55)
1/0-3 AWG; (2) Cu 4-6 AWG
Cu 4-6 AWG
5.6 (50)
2 4-6 AWG; (2) Cu 8 AWG
Cu 8 AWG
5.1 (45)
8 AWG; (2) Cu 10-14 AWG
—
4.5 (40)
3
JM60100-3CR
Cu 10-14 AWG; Al 10-12 AWG
—
4.0 (35)
1
JM60200-1CR
250kcmil-1 AWG
Cu 3/0-1 AWG
42 (375)
2
JM60200-2CR
3
JM60200-3CR
2-6 AWG; (2) Cu 2-6 AWG
Cu 2-6 AWG
31 (275)
CVR-J-60200-M
CVRI-J-60200-M
1
JM60400-1CR
600kcmil
57 (500)
2
JM60400-2CR
500kcmil-4 AWG
51 (450)
3
JM60400-3CR
1
JM60400-1MW22
2
JM60400-2MW22
3
JM60400-3MW22
1
JM60600-1CR
2
JM60600-2CR
3
JM60600-3CR
CVR-J-60400-M
CVRI-J-60400-M
(2) Cu 3/0 - 4 AWG
N/A
(2) Al 3/0 - 4 AWG
CVR-J-60600
CVRI-J-60600
2 (2) 500kcmil-4 AWG
N/A
Data sheet no. 10488
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
57 (500)
34 (300)
* Covers sold separately.
** Open fuse indication requires 90 volts minimum and closed circuit to operate.
*** Ratings for copper and aluminum conductors except where otherwise noted.
8-32
Torque
N•m (lb-in)
Eaton.com/bussmannseries
51 (450)
Fuse blocks and holders — 8
JM modular Class J power distribution fuse
blocks
The patented Class J power
distribution fuse blocks use
fewer wire connections to
reduce watts loss and overall
operating temperature of the
panel, while simplifying panel
layout. Available in ratings up
to 400 amps, they use up to
65 percent less panel space
while lowering inventory costs,
and reducing installation time
and labor by an average of 33
percent.
All blocks are equipped with a
fuse clip reinforcing spring to
minimize temperature rise while
maintaining reliable surface
contact between the fuse and
clip over the block's service life.
30 and 60 amp blocks.
100, 200 and 400 amp blocks.
Ratings
Amps up to 400 A
SCCR 200 kA Sym. RMS
Optional see-through, snap-on
cover for easy visual inspection
Available two-port lineside lug
for easy daisy-chain wiring
configuration. See catalog
number table for applicable
catalog numbers.
Covers; UL Listed, Guide JDVS, File E58836
•
RoHS compliant
•
1-, 2-, 3-pole
•
Single-pole units snap together to create desired number of poles
•
30 and 60 amp blocks DIN-Rail and panel mount
•
100, 200 and 400 amp blocks panel mount only
Flammability ratings
All blocks are available with optional see-through cover to enhance
safety with IP20 finger-safe protection, lockout/tagout capability and
open circuit indication. See catalog number tables for details.
•
•
Mounting
30 and 60 amp blocks feature DIN-Rail and panel mount versatility,
while 100 to 400 amp blocks are panel mount.
•
Blocks; UL Listed, Guide IZLT, File E14853, CSA Certified 47235 —
6225-01
Poles
The high 200 kA SCCR helps achieve a higher assembly short-circuit
current rating (SCCR) for compliance with NEC sections 110.10,
409.110(4), 409.22, 440.4(B), 670.3(A)(4) and 670.5.
Volts 600 V
•
2011/65/EU
Available as snap-together one-pole units for toolless assembly of
multiple poles at point of use or factory configured 2- and 3-pole
units to meet popular stocking requirements.
•
Agency information
•
Blocks, UL 94V0, self-extinguishing
•
Covers; UL 94HB, self-extinguishing
Operating and storage temperature range
•
Blocks, -40°C to +120°C
•
Covers; non-indicating -40°C to +120°C, indicating -20°C to +90°C
Conductors
•
75/90°C Cu/Al (unless otherwise noted)
Accessories
•
IP20 finger-safe covers in indicating and non-indicating versions.
Order one for each pole.
•
DIN-Rail end stops for blocks rated up to 60 amps, catalog
numbers BRKT-ND or BRKT-NDSCRW2
Finger grips on cover
for easy removal
Lockout/tagout feature
improves safety
Probe holes for easy testing
without removing cover
Vent slots improve cooling
(no fuse derating necessary)
Standard phase barriers
for additional safety
Toolless interlocking modular design
for easy point-of-use assembly
DIN-Rail or panel mounting on each
pole provides installation flexibility
(DIN-Rail mounting applies to 30
and 60 A blocks only)
Standard fuse clip reinforcing
spring reduces temperature rise
Multi-port loadside lug
for power distribution to
multiple branch circuit
connections
Ports on power distribution lugs rated
for dual-wire application, increasing the
number of branch circuit connections
(see catalog number table for details)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Marker label provision
for easy circuit
identification (applies to
30 and 60 A blocks only)
Data sheet no. 10192
Eaton.com/bussmannseries
8-33
Fuse blocks and
holders
Optional open fuse indication
speeds troubleshooting
8 — Fuse blocks and holders
Optional
covers*
Catalog no.
Fuse
amp
range
Lineside (conductors per port)
Poles
Conductors
Ports/
pole
1
JM60030-1MW14
JM60030-2MW14
N/A
Up to 30
JM60030-3MW14
2
Cu 2-14
Al 2-8
1
3
Loadside (conductors per port)
Torque AWG
N•m
(lb-in)
2-3
5.6 (50)
4-6
5.1 (45)
8
4.5 (40)
10-14
4.0 (35)
Conductors
Ports/
pole
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
Torque
AWG
N•m
(lb-in)
Cu (1) 8
3.4 (30)
Cu (1) 10-14 2.8 (25)
Cu (2) 12-14 3.4 (30)
Al (1) 8-10
3.4 (30)
†
1
2-4
5.6 (50)
2-3
5.6 (50)
JM60060-2MW12†
2
6-10
4.5 (40)
4-6
5.1 (45)
JM60060-3MW12
†
3
12-14
1.7 (15)
8
4.5 (40)
10-14
4.0 (35)
JM60060-1MW14
†
1
2-3
5.6 (50)
Cu (1) 8
3.4 (30)
JM60060-1MW12
JM60060-2MW14
†
CVR-J-60060
CVRI-J-60060**
35 - 60
2
JM60060-3MW14†
3
JM60060-1MW24
1
JM60060-2MW24
2
JM60060-3MW24
JM60100-1MW14
JM60100-2MW14
CVR-J-60100-M
70 - 100
CVRI-J-60100-M**
1
1
2
Cu 1/0-14
Al 1/0-12
Cu/Al (1) 250kcmil-6
Cu (2) 2-6
1
Al (1) 8-10
3.4 (30)
5.6 (50)
Cu (1) 8
3.4 (30)
JM60400-1MW16
1
JM60400-2MW16
2
4-6; Cu (2) 8
5.0 (45)
8; Cu (2) 10-14
4.5 (40)
10-14
4.0 (35)
250kcmil-1
42 (375)
2-6
31 (275)
600kcmil
Cu/Al (1) 600kcmil-4
Cu/Al (2) 3/0-4
500kcmil-4
Cu (2) 3/0-4
Al (2) (3/0-4
CVR-J-60400-M
225-400
CVRI-J-60400-M**
1
2
350kcmil-1
Cu/Al 350kcmil-6
Cu (1) 10-14 2.8 (25)
Cu (2) 12-14 3.4 (30)
Al (1) 8-10
3.4 (30)
4-6
4.0 (35)
2.8 (25)
2.3 (20)
(2) 10-14
3.4 (30)
4-6
4.0 (35)
8
2.8 (25)
10-14
2.3 (20)
(2) 10-14
3.4 (30)
2-3
5.6 (50)
4-6
8
(2) 8
5.0 (45)
4.5 (40)
4.5 (40)
57 (500)
10-14
4.0 (35)
34 (300)
(2) 10-14
4.5 (40)
42 (375)
2-3
4-6
8
5.6 (50)
5.0 (45)
4.5 (40)
(2) 8
4.5 (40)
10-14
4.0 (35)
(2) 10-14
4.5 (40)
Cu (1) 4-14
Al (1) 4-8
6
Cu (2) 10-14***
57 (500)
51 (450)
2
3
2-6
Cu (1) 4-14
Al (1) 4-8
4
Cu (2) 10-14***
Cu (2) 12-14 3.4 (30)
8
1
3
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
Cu (1) 10-14 2.8 (25)
Cu 10-14
1
3
JM60400-3MW26
4.0 (35)
2-4
1/0-3; Cu (2) 4-6 5.6 (50)
JM60200-2MW16
JM60400-1MW26
JM60400-2MW26
10-14
1
JM60200-1MW16
JM60400-3MW16
4.5 (40)
1.7 (15)
2
Cu (1) 8-14
Cu (2) 12-14***
4
Al (1) 8 Str
Al (1) 10 Sol
5.1 (45)
12-14
2
1
8
3
Cu 2-14
Al 2-8
Cu 2-14
Al 2-8
4-6
4.5 (40)
3
JM60200-3MW16
Cu 2-14
Al 2-8
2
6-10
JM60100-3MW14
CVR-J-60200-M
110-200
CVRI-J-60200-M**
Cu 2-14
Al 2-8
31 (275)
Cu (1) 2-14
Al (1) 2-8
Cu (2) 8-14***
Cu (1) 2-14
Al (1) 2-8
Cu (2) 8-14***
6
6
* Order one cover per pole.
** With open fuse indication. 90 V minimum and closed circuit required for illumination.
*** Dual wire rated lugs with same wire size and stranding.
† Rated for 75°C Cu/Al conductors. Conductors with higher ratings may be used with appropriate derating.
Data sheet no. 10192
8-34
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
T300 300 volt Class T fuse blocks
Dimensions — in
1.63
0.72
0.16
Bussmann series T300 fuse blocks
are open fuse blocks for use with
Class T fuses up to 600 amps in
various pole configurations from
1- to 4-poles. T300 blocks use
Bussmann series JJN fuses.
0.69
0.91
A
B
1.20
X
1.63
0.72
0.16
Z
0.91
2.75 2.5
Ratings
T30030-S
SECTION X-X
•
Volts 300 V
•
Amps up to 600 A
•
SCCR 200 kA RMS Sym.
T30060-C
SECTION Z-Z
Z
0.44 Full
0.20 Radius
C
Figure 1. Up to 60 A
Dimensions — in
Agency information
Catalog no.
UL Listed UL 4248, Guide IZLT,
File E14853, CSA Certified, Class
6225-01, File 47235, CE
Flammability rating UL 94V0
Features
•
Provide 1-, 2-, 3- and 4-pole housing for 300 Vac Class T fuses
•
High 200 kA RMS Sym. Short-Circuit Current Rating
•
Class T fuse blocks have a small foot print, providing substantial
space savings in equipment
A
B
T30030-2
2.41
—
1.03
T30060-2
2.41
—
1.03
T30030-3
3.44
1.03
2.06
T30060-3
3.44
1.03
2.06
T30030-4
4.47
2.06
3.09
T30060-4
4.47
2.06
3.09
1.69 (1 POLE)
3.09 (2 POLE)
4.5 (3 POLE)
2.06
1.41 (2 POLE)
2.81 (3 POLE)
0.84
Typical applications
•
300 V or less control systems
•
300 V or less individual control circuits
C
X
Z
0.22 DIA
Catalog numbers
Catalog no./terminals
Screw
T30030-2SR
T30030-3SR
T30030-4SR
T30060-2SR
T30060-3SR
T30060-4SR
—
—
—
—
—
—
—
Box lug
T30030-2CR
T30030-3CR
T30030-4CR
T30060-2CR
T30060-3CR
T30060-4CR
T30100-1CR
T30100-2CR
T30100-3CR
T30200-1C
T30200-3C
T30400-1C
T30600-1C
Amps
Poles
2
Up to 30 3
4
2
31-60
3
4
1
61-100
2
3
1
101-200
3
201-400 1
401-600 1
Fig.
Terminal AWG wire
range/type
0.52 C'BORE
0.55 DEEP
2.25
REF
4.78
SR 10-18 Cu
CR 6-14 Cu/Al
2.39
1
CR 2-14 Cu/Al
SR 10-18 Cu
2
3
4
5
6
1/0-8 Cu/Al
X
0.38
600kcmil-2/0 Cu/Al
(2) 600kcmil-4/0 Cu/Al
0.75
Figure 2. 61 to 100 A
250kcmil-6 Cu/Al
Z
6
3
0.05
1.125
1.25
1.69
Fuse blocks and
holders
•
X
2.25
0.28 DIAMETER
0.63 C'BORE 0.5 DEEP
3.06
2.56
1.94
0.81
Figure 3. 101 to 200 A
Data sheet no. 1115
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-35
8 — Fuse blocks and holders
4.87
1.695
0.996
A 2.75
A
0.282 DIAMETER THRU HOLE, 0.625 C'BORE 0.438 DEEP
2.375
0.625
4.46
Figure 4. 200 A
6
3
2.25
1.25
1.125
0.63
0.28 DIAMETER, 0.63 C'BORE 0.5" DEEP
1.84
3.06
2.38
0.81
Figure 5. 201 to 400 A
5.75
2.88
1.5
2
2.03
3
0.33 DIAMETER
0.75 C'BORE 0.5 DEEP
3.44
3
0.75
Figure 6. 401 to 600 A
Data sheet no. 1115
8-36
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
T600 600 volt Class T fuse blocks
Typical applications
Bussmann series T600 fuse blocks
are open fuse blocks for use with
Class T fuses up to 600 amps in
various pole configurations from
1- to 3-poles. T600 blocks use
Bussmann series JJS fuses.
•
600 V or less control systems
•
600 V or less individual control circuits
Catalog no./terminals
Ratings
•
Volts 600 V
•
Amps up to 600 A
•
SCCR 200 kA RMS Sym.
Agency information
•
UL Listed, UL 4248, Guide IZLT, File E14853, CSA Certified, Class
6225-01, File 47235, CE
Flammability rating UL 94V0
Screw
T60030-1SR
T60030-2SR
T60030-3SR
T60060-1SR
T60060-2SR
T60060-3SR
—
—
—
—
—
—
—
Box lug
T60030-1CR
T60030-2CR
T60030-3CR
T60060-1CR
T60060-2CR
T60060-3CR
T60100-1C
T60100-2C
T60100-3C
T60200-1C
1B0089*
T60400-1C
T60600-1C
Amps
Poles
1
Up to
2
30
3
1
31-60
2
3
1
61-100 2
3
1
101-200
3
201-400 1
401-600 1
Terminal AWG
Fig. range/type
1
SR 10-18 Cu
CR 2-14 Cu/Al
2
SR 10-18 Cu
CR 2-14 Cu/Al
3
2/0-14 Cu/Al
4
5
6
7
250kcmil-6 Cu/Al
600kcmil-2/0 Cu/Al
(2) 600kcmil-4/0 Cu/Al
* UL Listed, Guide IZLT, File E14853, CSA Certified Class 6225-01, File 21455M18.
Features
•
Provide 1-, 2- and 3-pole housing for 600 Vac Class T fuses.
•
High 200 kA RMS Sym. Short-Circuit Current Ratings
•
Class T fuse blocks have a small foot print, providing substantial
space savings in equipment
Dimensions — in
1.44
1.44
0.55
0.5
0.33
0.55
2.59
1.16
0.33
0.55
3.75
2.31
0.33
0.22 DIAMETER,
0.5 C'BORE
0.33
3.19
1.563
1.42
1.81
1.75
0.59
0.5
0.63
0.59
3.34
1.53
0.63
0.59
4.86
3.06
Fuse blocks and
holders
Figure 1. Up to 30 A
0.63
0.22 DIAMETER,
0.5 C'BORE
2.94
1.63
1.47
Figure 2. 31 to 60 A
Data sheet no. 1116
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-37
8 — Fuse blocks and holders
Dimensions — in
1.69 (1 POLE)
3.09 (2 POLE)
4.5 (3 POLE)
1.41 (2 POLE)
2.81 (3 POLE)
X
Z
0.84
6
3
0.78
0.22 DIA.
0.52 C'BORE
0.55 DEEP
2.25
1.25
1.125
0.63
0.28 DIAMETER, 0.63 C'BORE 0.5 DEEP
2.34
REF
2.72
2.39
3.06
2.38
X
0.38
0.75
Z
SECTION Z-Z
Figure 3. 61 to 100 A
0.81
Figure 6. 201 to 400 A
3.38
3
0.05
6
6.75
1.5
23
1.125
1.25 2.25
0.3 DIAMETER, 0.75 C'BORE 0.5 DEEP
0.28 DIAMETER
0.63 C'BORE 0.5 DEEP
2.5
2.95
3.44
3.06
2.56
1.94
3
0.75
0.81
Figure 4. 101 to 200 A (T60200-1C)
Figure 7. 401 to 600 A
Ø0.2812
C-Bore 0.5
4.5
3.0
7.0
2.25
0.1875
7.75
Figure 5. 101 to 200 A (1B0089)
Data sheet no. 1116
8-38
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
Modular open-center fuse blocks
2011/65/EU
BH modular type
C5268 stud type
BH modular fuse blocks are for use with various blade and ferrule
(cylindrical) Bussmann series high speed, and Class J and T fuses.
See the data sheets referenced in the catalog number table for
block/fuse compatibility.
Ratings
•
Volts 700 V
•
Amps
•
•
BH-0xxx 100 A
•
BH-1xxx and BH-2xxx 400 A
•
BH-3xxx 700 A
The simpler design is the C5268 modular fuse block. With this
design, the fuse terminal and cable (with termination) are mounted
on the same stud, minimizing labor needed for installation. The
stud type block is available in the configurations shown in the table
below.
Catalog no.
C5268-1
C5268-2
C5268-3
C5268-4
C5268-5
Max fuse amp rating
200
100
Stud
5/16-18 x 1"
5/16-18 x 1-3/4"
5/16-18 x 3/4"
1/4-20 x 1"
1/4-20 x 1-3/4"
SCCR 200 kA RMS Sym. or fuse IR, whichever is lower
Agency information
•
UL Recognized, Guide EZLT2, File No. E14853 up to 700 V,
CSA Certified, Class 6225-01, File No. 47235 up to 700 V, RoHS
compliant, CE
2011/65/EU
Features
•
A wide range of mounting configurations
•
High Short-Circuit Current Rating (SCCR) based upon installed fuse
up to 200 kA RMS Sym.
Typical applications
Solid state control circuits
•
VFDs
•
UPS systems
1BS10x connector type
Refer to the data sheet numbers below for the catalog code
description information.
Cat no.
BH-0001
BH-0002
BH-0003
BH-0111
BH-0112
BH-0113
BH-0121
BH-0122
Data
sheet
1200
Cat no.
BH-1001
BH-1002
BH-1003
BH-1131
BH-1132
BH-1133
Data
sheet
1201
Cat no.
BH-2001
BH-2002
BH-2003
BH-2031
BH-2032
BH-2033
Data
sheet
1202
Cat no.
BH-3003
BH-3004
BH-3033
BH-3144
BH-3145
Data sheet no. 1200 (BH-0), 1201 (BH-1), 1202 (BH-2),
1203 (BH-3)
Data
sheet
1203
Eaton's Bussmann series also offers a modular style fuse block
that utilizes a tin-plated connector for wire termination and heat
dissipation) with a plated-steel stud for fuse mounting. The
connector type fuse block is available in the RoHS compliant
configurations shown below. Consult your Bussmann series product
representative for additional product details.
Catalog no.
1BS101
1BS102
1BS103
1BS104
Max rated voltage
Max fuse amp rating
100
600
400
600
Data sheet no. 1206 (1BS101), 1207 (1BS102), 1208 (1BS103),
1209 (1BS104)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-39
Fuse blocks and
holders
•
8 — Fuse blocks and holders
SD and TD blocks for NH size fuses
Flammability rating
1-pole SD and 3-pole TD fuse
blocks for NH fuse sizes 00 to 4
are specifically designed for use
with Bussmann series bladed
NH fuses. See data sheet
720109 (690 V gG/gL) and 10164
(500 V gG/gL).
•
2011/65/EU
UL 94V0
Catalog no.
Poles
SD00-D
1
TD00-D
3
TD00-DI*
For NH 1 to 3 photovoltaic fuse
applications, see the single-pole
SD-PV blocks in the PV fuse
section.
SD1-D
1
TD1-D
3
SD2-D
1
Ratings
TD2-D
3
SD3-D
1
TD3-D
3
•
Volts
•
690 Vac
•
1000 Vac (Sd1-D only)
•
Amps 160 to 1600 A
•
SCCR up to 120 kA
SD4-D
Shown with optional shroud kit
Agency information
•
IEC 60269-1 and 2
•
VDE 0636-1 and 2
•
RoHS compliant
Poles
•
•
NH fuse block
1
SD4-S1600**
NH fuse size
Amps
000 and 00
160
1
250
2
400
3
630
1 and 3
IEC - IP20 with shroud kit installed and shielding of any exposed
terminal lugs
UL - Installation of shroud kit decreases the likelihood of incidental
terminal contact. To ensure compliance to IP20 specifications per
UL the installer must make additional provisions.
Temperature range
Accessories
Fuse extraction handle
Catalog no.
Size
Amps
FEH
NH00 to 3
160 to 630
Catalog no.†
Fuse block
Fuse size
Amps
SD12-SK
SD1/TD1
NH1
250
SD12-SK
SD2/TD2
NH2
400
SD3-SK
SD3/TD3
NH3
630
Catalog no.††
Fuse block
Fuse size
Amps
SD00-PB
SD00/TD00
NH00
160
SD12-PB
SD1/TD1
NH1
250
Storage -40°C to +80°C
SD12-PB
SD2/TD2
NH2
400
SD3-PB
SD3/TD3
NH3
630
35mm DIN-Rail
Panel
Includes 2
shrouds and 1
fuse cover
Phase barrier kits
Operating -20°C to +70°C
Mounting
Description
† Order one kit per pole.
•
•
1600
* 3-pole integral base molding.
** Panel mount only.
•
•
1250
4
Shroud kits
Protection level
•
Description
Description
2 phase barriers
and 2 ganging
links
†† Order one kit per 3-pole assembly.
Microswitches
Catalog no.
Ratings
BVL50
6 A 250 Vac
170H0236
2 A 250 Vac
170H0238
2 A 250 Vac
Neutral links
Catalog no.
Fuse size
Amps
SDL-00
NH00
160
SDL-1
NH1
250
SDL-2
NH2
400
SDL-3
NH3
630
Data sheet no. 10163
8-40
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
HTB panel mount fuse holders for 5x20mm and
1/4" x 1-1/4" fuses
Panel mount holders with knobtype and screwdriver-type carriers
made from high temperature, flame
retardant thermoplastic (UL 94V0)
and tin-plated brass quick-connect
terminals.
Knob-type fuse carrier
Volts 250 V
2011/65/EU
Amps 20 A max*
•
Insulation resistance (per IEC #257) 10,000 ohms @ 500 Vdc
•
Contact resistance (per IEC #257) 0.005 ohms max @ 1 A
•
Standoff voltage (per IEC #257) 480 V/Mil @ 0.125” thickness
Catalog numbers and dimensions — in (mm)
Solder / 3/16" QC terminal
Holder dimensions
0.34
(8.7)
In-line
•
UL Recognized, Guide IZLT2, File E14853, 1/4" dia. fuse @ 20 A,
5mm dia. fuse @16 A @ 250 V, CSA Class 6225-01 File 47235 @ 16
A @ 250 V, VDE Certified, 136128, HTB-XXM, SEMKO Certification,
Ref. 0146149/01, HTB-XXM, RoHS compliant, CE
0.33
(8.3)
-55°C to +85°C
Mounting
•
Rear hex nut; HTB-2_, HTB3_, HTB-4_, HTB-5_
•
Front hex nut; HTB-6_
•
Snap-in; HTB-8_, HTB-9_
Splash-proof versions
•
* See data sheet 2119 for ratings by holder configuration.
Max
panel
thickness
— in
(mm)
•
Operating temperature range
Screwdriver-type
fuse carrier
Ratings*
Agency information
Splash-proof versions available by adding "-SP" suffix to the catalog
number.
1/4" QC terminal
0.47
(11.9)
Fuse carrier*
0.45
(11.5)
Rt. angle
In-line
Rt. angle
HTB-22I-R
HTB-24I-R
HTB-26I-R
HTB-28I-R
HTB-22M-R
HTB-24M-R
HTB-26M-R
HTB-28M-R
HTB-42I-R
HTB-44I-R
HTB-46I-R
HTB-48I-R
HTB-42M-R
HTB-44M-R
HTB-46M-R
HTB-48M-R
HTB-62I-R
HTB-64I-R
HTB-66I-R
HTB-68I-R
HTB-62M-R
HTB-64M-R
HTB-66M-R
HTB-68M-R
HTB-82I-R
HTB-84I-R
HTB-86I-R
HTB-88I-R
HTB-82M-R
HTB-84M-R
HTB-86M-R
HTB-88M-R
1/4"
I = inches
5mm
M = metric
Knob-type carrier — common length 1.69 (43)
0.47
(11.9)
1.125
(28.6)
X
0.3 (8)
0.09 NOM.
X
(2.4)
0.69
0.91
(17.5)
(23.0)
X
0.125 (3)
0.67
(17.1)
0.92
(23.4)
X
X
0.3 (8)
0.47
(11.9)
1.125
(28.6)
X
X
0.125 (3)
X
0.17
(4.37)
1.58
(40.03)
HTB-32I-R
HTB-34I-R
HTB-36I-R
HTB-38I-R
HTB-32M-R
HTB-34M-R
HTB-36M-R
HTB-38M-R
HTB-52I-R
HTB-54I-R
HTB-56I-R
HTB-58I-R
HTB-52M-R
HTB-54M-R
HTB-56M-R
HTB-58M-R
HTB-92I-R
HTB-94I-R
HTB-96I-R
HTB-98I-R
HTB-92M-R
HTB-94M-R
HTB-96M-R
HTB-98M-R
X
0.3 (8)
0.41
(10.31)
1.34
(34.13)
X
X
0.125 (3)
0.17
(4.37)
1.59
(40.08)
X
X
0.125 (3)
X
* Fuse carriers may be ordered separately. Specify "FT" for knob-type or "ST" for screwdriver type,
followed by "-I" for 1/4" fuses and "-M" for 5mm fuses.
Data sheet no. 2119
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-41
Fuse blocks and
holders
Screwdriver-type carrier — common length 1.75 (45)
8 — Fuse blocks and holders
HJL panel mount neon lamp indicating holder for
1/4" x 1" fuses
Ratings
•
Volts 250 V
•
Amps 15 A
Vibration resistant bayonet-type knob
holders for panels up to 5/16" thick.
HKP,
HKP-L, HKP-W
Ratings
2011/65/EU
•
Volts 250 V
Amps up to 30 A*
Catalog no.*
Volts
Lamp color
Knob type
•
HJL
90 to 250
Clear
Octagonal
* See data sheet 2106 for ratings by specific
holder.
* Use with AGX, MKB, TCP70 and TDC fuses, for panels up to 1/8" thick.
Agency information
Dimensions — in (mm)
1.19
2.81
(71)
(30)
•
Punched mounting
hole
0.63
0.81
(16)
(21)
Octagonal
sides
0.590
(15)
Data sheet no. 2121
HK panel mount neon and incandescent lamp
indicating holders for 1/4" x 1" fuses
Ratings
•
Volts 250 V
•
Amps
HKP-BBHH,
HKP-HH, HKP-LW-HH
HKP-OO
UL Recognized Guide IZLT2, File E14853, CSA Certified,
Class 6225-01, File 47235, CE (HKP, HKP-L, HKP-W, HKP-OO),
RoHS compliant
Catalog no.
Description
HKP-R
Standard fuse holder
HKP-L-R
HKP with 2250 V stand-off barrier
HKP-W-R
HKP with drip-proof knob
HKP-BBHH-R
HKP with 1/4" quick-connects, nut and washer
assembled.
HKP-HH-R
HKP with 1/4" quick-connect.
HKP-LW-HH-R
HKP with drip-proof knob, 2250 V stand-off barrier
and 1/4" quick-connects.
HKP-OO-R
HKP with snap-lock
Replacement parts
•
15 A (HKL, HKL-X)
•
20 A (HKR, HKT, HKU, HKX)
Agency information
•
HKP panel mount holders for 1/4" x 1-1/4" fuses
UL Recognized, Guide IZLT2, File E14853), CSA Certified Class
6225-01, File 47235, CE
Catalog no.
Lamp volts
Knob color/type
HKL*
90-250
Clear/octagonal
HKL-X*
90-250
Clear/flat side
HKR**
22-30
Amber/octagonal
HKT**
13-22
Amber/octagonal
HKU**
4-6
Red/octagonal
HKX**
22-33
Amber/flat side
Catalog no.
Description
9435-1/2
Cap
BK/1A4287
Plastic nut (100 pieces minimum)
BK/1A4806-2
Metal nut (100 pieces minimum)
9732
Washer
Dimensions — in (mm)
HKP-R, HKP-L-R, HKP-W-R
* Neon lamp UL Recognized and CSA Certified.
** Incandescent lamp.
Dimensions — in (mm)
2.81
1.19
(30)
(71)
Punched mounting
hole
HKP-BBHH-R, HKP-HH-R, HKP-LW-HH-R
0.75
Flat sides
0.81
(19)
0.630
(21)
FU
F USE
(15)
Octagonal
sides
HKP-OO-R
Data sheet no. 2105
SE
F
E
US
0.573
8-42
1.56
(40)
Punched
mounting hole
(16)
0.855 1.17
0.89
(23)
(22)
0.8
(20)
0.81
(21)
Data sheet no. 2106
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
HLD panel mount holders for 1/4" x 1-1/4" pin
indicating fuses
HPF panel mount holders with screw-type knobs
for 13/32" x 1-5/16" to 1-1/2" fuses
Ratings
Ratings*
•
Volts 250 V
•
Volts up to 600 V
•
Amps 15 A
•
Amps up to 30 A
* See catalog numbers for ratings by
specific holder.
Agency information
•
UL Recognized, Guide IZLT2, File E14853, CE
Agency information
•
Catalog no.*
Terminals
HLD
Solder terminals
HLD-HH
1/4" quick-connect terminals
* Use with GBA or GLD fuses.
Dimensions — in (mm)
•
Punched
mounting hole
Washer
(22)
0.69
0.505
(18)
(16)
0.473
2.75 Max. (HLD-HH)
(12)
(70 Max.)
Data sheet no. 2120
HPC-D flange panel mount, solder terminal
10 AWG max holder with screw-type knob for 13/32" x 1-1/2" fuses.
Supplied with O-ring and panel gasket
Ratings
•
Flammability rating: UL 94HB
Terminals
2.5 Max. (HLD)
(64 Max.)
0.86
Octagonal
sides
UL Recognized, Guide IZLT2,
File E14853; CSA Certified,
Class 6225-01, File 47235, CE
Combination 1/4" quick-connect/solder** terminals
** Solder terminal 10 AWG wire max.
Catalog no.
HPF
HPF-C
HPF-L
HPF-EE
HPF-JJ
HPF-FF1
HPF-RR
HPF-WT
Amps
302
303
5
15
20
302
302
302
Volts (AC) Fuse/description/length
600
1-1/2" (38mm)
6003
Clear knob 1-1/2" (38mm)
600
BBS, 1-3/8" fuses.
600
SC Class G up to 15 A, 1-5/16"
600
SC Class G 20 A, 1-13/32"
480
SC Class G 25 and 30 A, 1-5/8"
600
FNQ-R, KTK-R, LP-CC, Class CC
600
Splash-proof knob. 1-1/2" (38mm)
1 Not CSA Certified.
2 20 A max when used with quick-connect terminals.
3 HPF-C ratings for CSA: 15 A, 250 V.
Dimensions — in (mm)
600 V, 30 A*
With fuse
2.81 Max.
* 20 A max when used with quickconnect terminals.
(71)
Agency information
FU
E
FUS
•
USE
SE F
UL Recognized, Guide IZLT2, File E14853, CE
Flammability rating: UL 94HB
1.0 1.31 1.78
(25) (33) (45)
Ø 0.180
1.125
(29)
Catalog no.
Description
HPC-D
Flange mount in panels up to 1/4" thick.
BK/9987SA
Replacement knob, bulk only, 50 pieces
(5)
0.88
(22)
2.69 Max.
(68)
Without fuse 0.250
(6)
(Typ.2)
1.120
Fuse blocks and
holders
Dimensions — in (mm)
0.88
(30.5)
(22.2)
1.775
(45.1)
With fuse
0.180
2.48 (63.1)
(4.6)
0.187
(4.75)
1.031
0.89
(26.2)
Mounting hole
1.312
(33.3)
rear of panel
(22.6)
1.312
(33.3)
front of panel
Data sheet no. 2109
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 2114
Eaton.com/bussmannseries
8-43
8 — Fuse blocks and holders
HPD and HPG panel mount bayonet-type knob
holders for 13/32" x 1-1/2" fuses
Ratings
Ratings
•
Volts 600 V
•
Amps
Volts 600 V
Amps 30 A*
•
30 A
•
15 A (Class G only)
* 20 A max when used with quickconnect terminals.
HPD
Agency information
Agency information
•
•
UL Recognized, Guide IZLT2,
File E14853, CE
Flammability ratings
•
•
HPM panel mount holders with screw-type knob
for 13/32" x 1-1/2" fuses.
Flammability rating: UL 94HB
HPG, HPG-EE
Body UL 94V0
Knob UL 94HB
Catalog no.
HPD*
HPG**
HPG-EE**
Amps
Volts (AC)
301
600
15
UL Recognized, Guide IZLT2, File E14853; CSA Certified, Class
6225-01, File 47235, CE
Fuse/description/length
Catalog no.
Description
HPM
1/4" quick-connect/solder
HPM-D
Splash-resistant knob**
BK/9789-Y2
Replacement knob, bulk only, 50 pieces
** HPM-D has 1/4" quick-connect/solder terminal on rear (load) terminal only. The
side (line) terminal is 1/4" quick-connect only.
1-1/2" (38mm)
SC Class G up to 15 A, 1-5/16"
* HPD has combination 1/4" quick-connect/solder terminal on loadside (side)
terminal only. Lineside (rear) terminal is 3/16" shorter than and is solder only.
** HPG and HPG-EE has combination 1/4" quick-connect/solder terminals on both
side (load) and rear (line) terminals.
1 20 A max when used with quick-connect terminals.
Nut torque:
•
30 lb-in.
Dimensions — in (mm)
With fuse
2.73
(69.5)
Dimensions — in (mm)
0.94
(23.8)
1.41
(30.6)
2.594
(65.89)
HPD
Without fuse 0.250
2.81
0.88
(22)
1.125
(28.6)
(6.35)
(71)
Punched mounting hole
0.88
(22)
0.815
(21)
HPG, HPG-EE
Data sheet no. 2108
8-44
Data sheet no. 2112
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
HPS panel mount bayonet-type knob holders for
13/32" x 1-5/16" to 1-1/2" fuses
Ratings*
•
Volts up to 600 V
•
Amps up to 30 A
For fuse size 13/32" x 1-1/2",
meeting UL 1598 requirement
that both poles be removed
simultaneously.
* See catalog numbers for ratings by
specific holder.
Agency information
•
Ratings
UL Recognized, Guide IZLT2, File E14853; CSA Certified, Class
6225-01, File 47235, CE
Flammability rating: UL 94HB
Volts 600 V
Amps 30 A*
* 20 A max when used with quick-connect terminals.
Agency information
Terminals
•
HPS2 panel mount, 1/4" quick-connect/solder
terminal (10 AWG max) holder with screw-type
knob for 13/32" x 1-1/2" fuses. Supplied with
O-ring and panel gasket
•
Combination 1/4" quick-connect/solder terminals.
Catalog no.
HPS
HPS-L
HPS-EE*
HPS-JJ*
Amps
301 2
5
15
20
Volts (AC)
600
600
600
600
HPS-F-EE†
15
600
HPS-FF*†
HPS-RR*†
301
301
480
600
Fuse/description/length
1-1/2" (38mm)
BBS, 1-3/8"
SC Class G up to 15 A , 1-5/16"
SC Class G 20 A, 1-13/32"
Sleeve on body, leaded for 1-5/16"
fuses
SC Class G 25 and 30 A, 1-5/8"
FNQ-R KTK-R, LP-CC Class CC
UL 4248 Recognized, Guide IZLT2, File E14853, CSA certified
Class 6225-01, File 47235
Flammability rating: UL 94V0
Terminals: 1/4” quick-connect/solder.
Catalog no.
Description
HPS2
Standard 10-in carton
BK/HPS2
Bulk 100-in carton
Dimensions — in (mm)
* -EE, -JJ, -FF and -RR suffix versions are UL Recognized for applications requiring
branch circuit protection.
† Not CSA Certified.
1 20 A max when used with quick-connect terminals.
2 HPS rated at 250 V for CSA.
Dimensions — in (mm)
With fuse
2.81
0.88 (71)
(22)
0.250
(6)
(Typ.2)
1.78
(45)
0.180
(5)
(29)
0.80
(20)
2.41
(64)
Without fuse
Fuse blocks and
holders
1.125
Data sheet no. 2113
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 2140
Eaton.com/bussmannseries
8-45
8 — Fuse blocks and holders
HHT in-line fuse holder for 5x15mm to 20mm
fuses
HFA in-line water-resistant holders for 1/4" x
1-1/4" fuses
The HHT features a black thermoplastic body with
brass contacts and 13 inch red AWG 16 leads.
The HFA is a waterproof, crimp or quick-connect
terminal holder for exposed locations made of high
temperature, flame retardant phenolic material
meeting UL 94 HB. Recommended crimp tools
include Thomas & Betts WT-112M or ERG-2002 and
Channelock No. 909.
Ratings
•
•
Volts
•
250 Vac
•
32 Vdc
Ratings
Amps
•
5 A (5x15mm fuses)
•
10 A (5x20mm fuses)
•
Volts 250 V
•
Amps 20 A max.
Agency information
Catalog no.
•
Fuse size (mm)
HHT (100-in)
5x15 and 5x20
BK/HHT (1000-in)
UL Recognized, Guide IZLT2, File E14853 using AWG 12 copper
conductors
Catalog no.
Terminals/AWG
HFA (10-in)
Dimensions — in
HFA-R (10-in, RoHS compliant)
0.25
Crimp/12-16
BK/HFA-R (20-in, RoHS compliant)
6.181
0.99
0.88
6.063
HFA-HH* (10-in)
HFA-HH-R* (10-in, RoHS compliant
WIRE LENGTH: 13
1/4" quick-connect
BK/HFA-HH-R* (20-in, RoHS compliant
0.42 DIA.
1.87
Data sheet no. 2138
8-46
* Not UL Recognized.
Dimensions — in
Data sheet no. 2115
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
HFB and HFB-10 in-line holders for 1/4" x 7/8" to
1-1/4" fuses
HHB universal in-line holders for 1/4" x 7/8", 1"
and 1-1/4" fuses
Water-resistant in-line fuse
holder for 1/4" x 1-1/4" fuses
made of a thermoplastic rubber
body with tin-plated, copper
contacts.
Universal in-line fuse holder for
1/4" diameter fuses in lengths
from 7/8" to 1-1/4" made of
a nylon body with tin-plated,
copper contacts.
Ratings
Ratings
•
Volts 32 V
•
Volts 32 V
•
Amps 30 A max.
•
Amps 30 A max.
Catalog no.
Description
Catalog no.
HFB-R*
Standard pack (10-in)
Holder without leads*
Description
BK/HFB-R*
Bulk pack (100-in)
HHB-R**
Standard pack (10-in)
HFB-10-R**
Standard pack (10-in)
BK/HHB-R**
Bulk pack (1000-in)
BK/1A2294
HFB replacement contact clip
Holder with pre-attached 14 AWG insulated lead wires
1A2294-01
HFB-10** replacement contact clip
BK/HHB-Y408
8" yellow leads (1000-in)
* HFB-R accepts #12 to #18 wire leads (not provided). See data sheet 2102 for
recommended crimp tools.
** HFB-10-R accepts #10 wire leads (not provided). See data sheet 2102 for
recommended crimp tools.
BK/HHB-R408**
8" red leads (1000-in)
BK/HHB-B408
8" black leads (1000-in)
BK/HHB-Y419
19" yellow leads (1000-in)
Features
BK/HHB-R419
19" red leads (1000-in)
BK/HHB-B419
19" black leads (1000-in)
•
Simple assembly with one-piece thermoplastic (important
information molded into body)
•
High visibility yellow color for easy identification in dark or hard-toaccess locations
•
Ideal for shock and vibration environments; withstands many
organic solvents; temperature range -40°C to +150°C
Typical applications
* Accepts #12 to #16 wire leads (not provided with basic fuse holder). See data
sheet 2103 for recommended crimp tools.
** RoHS compliant.
Flammability rating: UL 94V2
Pull force
•
•
Supplemental, low voltage, low amperage control circuits
Dimensions — in (mm)
Features
•
3
(76.2)
5 lbs minimum to separate fuse holder housing with fuse installed
Universal application for 1/4" x 7/8", 1" and 1-1/4" fuses
Typical applications
•
0.75
(19.1)
Supplemental, low voltage, low amperage control circuits
Dimensions — in (mm)
L
0.53
Data sheet no. 2102
Fuse length
Fuse
Max. holder length “L”
7/8"
AWG
2.10
1"
AGX
2.25
1-1/4"
ABC, AGC, GBB,
MDA, MDL, MDQ
2.42
Data sheet no. 2103
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-47
Fuse blocks and
holders
(13.5)
8 — Fuse blocks and holders
HRK Universal in-line holder for 1/4" x 7/8" to
1-1/4" fuses
HM, HR and HH in-line holders
HM and HR in-line fuse holders feature 8 and 19
inch 14 AWG length leads with a size-rejecting
SFE fuse. Also accommodates various length
1/4" diameter fuses from 5/8" to 1-1/4".
Universal in-line fuse holder with
8" (203mm) 14 AWG lead wires
for 1/4" diameter fuses in lengths
from 7/8" to 1-1/4".
Ratings
2011/65/EU
Ratings
•
Volts 32 V
•
Amps 20 A max.
Lead length
(in)
•
Volts 32 V
•
Amps 15 A max.
Fuse length
(in)
Catalog no.
Included SFE fuse
HMJ*
SFE-20
1-1/4
HMI
SFE-14
1-1/16
HMH
SFE-9
7/8
HME
SFE-7-1/2
HMG
SFE-6
3/4
HMF
SFE-4
5/8
* Three springs furnished with fuse holder to accommodate different length 1/4"
fuses.
Features
8
Catalog no.
HRK-R*
7/8
HRJ**
SFE-20
1-1/4
HRI
SFE-14
1-1/16
HRH
SFE-9
HRE
SFE-7-1/2
7/8
19
7/8
Accepts fuse
length
Fuse
7/8"
AWG
1"
AGX
1-1/4"
ABC, AGC, GBB, MDA, MDL, MDQ
•
Universal application for 1/4" x 7/8", 1" and 1-1/4" fuses
•
14 AWG lead wires simplify electrical connection.
RoHS compliant
HRG
SFE-6
3/4
•
HRF
SFE-4
5/8
Typical applications
* Also available as in-line fuse holder only with lead wire contacts,
HMJ-LESS-fuse.
** Also available as in-line fuse holder only with lead wire contacts, HRJ-LESS-fuse.
Catalog no.
HHJ-A
HHJ-B
HHI-A
HHI-B
Fuse
length (in)
1-1/4
1-1/16
Holder
description
No wire
or fuse
included
AWG wire
range
Max amps
18-22
10
12-16
30
18-22
10
12-16
30
•
Supplemental, low voltage, low amperage control circuits
Dimensions — in (mm)
2.19
(55.6)
0.75
(19.1)
0.69
(17.5)
Replacement contacts
1.56
(39.7)
Contact catalog no.
For holder catalog no.
9838
HHJ-A and HHI-A
9841
HHJ-B and HHI-B
Features
•
Universal application for SFE and various length 1/4" diameter
fuses.
•
14 AWG lead wires simplify electrical connection.
Typical applications
•
Supplemental, low voltage, low amperage control circuits
Dimensions — in (mm)
2.19
(55.6)
0.75
(19.1)
0.69
(17.5)
1.56
(39.7)
Data sheet no. 2122
8-48
0.38
(9.5)
Data sheet no. 2111
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
0.38
(9.5)
Fuse blocks and holders — 8
HEC, HEG, HEH and HEJ† single-pole Class G fuse
non-breakaway in-line holders
Class G size-rejecting non-breakaway submersible, single-pole
in-line fuse holders available with many terminal options to meet
application needs. Optional insulating boots provide additional
protection from dust and moisture ingress (order separately). The
HEC is also available in a breakaway version.
† HEJ holders are not RoHS compliant.
2011/65/EU
Ratings*
Recommended crimping tools
This list is not intended to exclude the use of other crimping tools
that can provide similar crimps or indents.
Terminal code
T & B P/N (Die)
Terminal code T & B P/N (Die)
WT-111M (C)
A
TBM5 (Brown)
Sta-Kon ERG4002 (C)
B
D
WT-115A (D)
TBM5 (Grey)
C
WT-115A (E)
N, P, Q, R, T
TBM8 (Brown)
WT-115A (F)
Z
WT-111M (A)
Sta-Kon ERG4002 (A)
TBM8 (Orange)
Volts up to 600 V
Amps up to 60 A
HET neutral
SCCR 200 kA RMS Sym.
The HET holder is a single-pole in-line holder with
a permanent, solid neutral for use along with
the Class G in-line holders to provide a means of
conductor continuity. The HET holder is identified by
a white, plastic coupling nut. Available HET holder
counterparts to their Class G holder equivalents are
listed in the following catalog number tables. See
data sheet no. 2125 for details on the HET holder.
* Dependant upon fuse and conductor rating.
Insulating boots
Insulating boots are not included. Two insulating boots must be
ordered separately, if required, for each holder ordered. When
insulating boots are utilized, extra heat retention requires that fuses
are sized at a minimum of 200 percent of the RMS load current.
To order insulating boots for Class G holders, use these catalog
numbers.
Catalog no.
Description
2A0660
Single conductor
2A0661
Dual conductor
HEG
HEH
•
600 V
•
600 V
•
15 A
•
20 A
HEC breakaway Class G fuse in-line holder
The HEC breakaway holder includes insulating boots.
HEJ
•
480 V
•
480 V
•
25-30 A
•
35-60 A
Amps
Catalog no.
Line and load terminal
AWG
25-30
HEC-RW-RLB-R
Al crimp
1-2 str.
Fuse blocks and
holders
HEC
Data sheet no. 2123 (HEJ), 2124 (HEC, HEG, HEH)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-49
8 — Fuse blocks and holders
Non-breakaway catalog number system
Loadside
terminal
Lineside
terminal
15
Catalog
symbol
Amps
HE_ - A A
HEG
A
A
20
HEH
A
25-30
HEC
A
A
35-60
HEJ
Loadside terminal
Lineside terminal
Terminal type
AWG Wire range*
Terminal type
AWG wire range*
HET neutral equivalent
Cu crimp
8-16; (2) 12-16
Cu crimp
8-16; (2) 12-16
HET-AA
A
Cu crimp
8-16; (2) 12-16
Cu crimp
8-16; (2) 12-16
HET-AA
D
Cu crimp
8-16; (2) 12-16
Cu crimp
2 str; (2) 6
—
A
Cu crimp
8-16; (2) 12-16
Cu crimp
8-16; (2) 12-16
HET-AA
A
Cu crimp
8-16; (2) 12-16
Cu crimp
8-16; (2) 12-16
HET-AA
B
Cu crimp
8-16; (2) 12-16
Cu crimp
6; (2) 10
HET-AB
B
B
Cu crimp
6; (2) 10
Cu crimp
6; (2) 10
HET-BB
C
C
Cu crimp
4 str; (2) 8
Cu crimp
4 str; (2) 8
—
D
D
Cu crimp
2 str; (2) 6
Cu crimp
2 str; (2) 6
—
J
Cu setscrew
3-12
Cu setscrew
3-12
HET-JJ
K
Cu setscrew
3-12
Cu dual setscrew
2-12†
HET-JK
Al setscrew
2-12
Al setscrew
2-12
—
J
L
L
LB††
P
P
Al crimp
4 sol; 6 str
Al crimp
4 sol; 6 str
—
Q
Q
Al crimp
2 sol; 3-4 str
Al crimp
2 sol; 3-4 str
—
W
W
Cu solid
-
Cu solid
-
—
* Solid/stranded conductors unless otherwise noted.
† Not dual wire rated. One wire per opening.
†† Same as catalog number as HEJ-LL, but packaged with two 2A0660 single conductor insulating boots.
To order: specify catalog symbol and the loadside terminal code. Then select a lineside terminal code that is available with the loadside
terminal. Example: HEJ-BB defines a non-breakaway holder with a loadside copper crimp terminal for a single #6 or two #10 wires with a
lineside copper crimp terminal for a single #6 or two #10 wires.
Data sheet no. 2123 (HEJ), 2124 (HEC, HEG, HEH)
8-50
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
Insulating boots
HEB single-pole breakaway and non-breakaway
in-line holders for 13/32" x 1-1/2" supplemental
fuses
Two insulating boots come standard with the breakaway holder
configurations. Insulating boots are not included as standard with
non-breakaway holders. Two insulating boots must be ordered
separately, if required, for each non-breakaway holder ordered. When
insulating boots are utilized, extra heat retention requires that fuses
are sized at a minimum of 200 percent of the RMS load current.
2011/65/EU
Breakaway and non-breakaway
submersible, single-pole in-line
fuse holders available with many
terminal options to meet application
needs. Breakaway versions come
with insulating boots to provide
submersibility per UL IP67. Nonbreakaway versions require ordering
optional insulating boots for
submersibility.
To order insulating boots for a non-breakaway HEB holder, use these
catalog numbers.
Ratings
Catalog no.
Description
2A0660
Single conductor
2A0661
Dual conductor
Recommended crimping tools
Volts 600 V
This list is not intended to exclude the use of other crimping tools
that can provide similar crimps or indents.
Amps up to 30 A limited by conductor size
SCCR 200 kA RMS Sym.*
Terminal code T & B P/N (Die)
* Dependant upon fuse interrupting rating.
A
Agency information
Terminal code
WT-111M (C)
TBM5 (Brown)
Sta-Kon ERG4002 (C)
B
D
TBM8 (Brown)
WT-115A (D)
UL Recognized, Guide IZLT2, File E14853, CSA Certified, Class
622501, File 47235, CE, RoHS compliant**
C
** See data sheet 2127 for exceptions.
N, P, Q, R, T
TBM5 (Grey)
WT-115A (E)
T & B P/N (Die)
WT-115A (F)
WT-111M (A)
Z
Sta-Kon ERG4002 (A)
TBM8 (Orange)
HET neutral
The HET holder is a single-pole in-line holder with a
permanent, solid neutral for use along with the HEB
holder to provide a means of conductor continuity.
The HET holder is identified by a white, plastic
coupling nut. Available HET holder counterparts to
their HEB equivalents are listed in the following
catalog number tables. See data sheet no. 2125 for
details on the HET holder.
A
HEB
B
J
K
L
Lineside
terminal
Loadside
terminal
Catalog
symbol
HEB - A W - RYC
Agency Information
Loadside terminal
Lineside terminal
AWG wire range*
HET neutral
equivalent
Cu crimp
8-16; (2) 12-16 Str/Sol
HET-AW-RLC-A
Cu crimp
6; (2) 10
HET-AW-RLC-B
8-16; (2) 12-16 Str/Sol
Cu crimp
4; (2) 8
HET-AW-RLC-C
Cu crimp
8-16; (2) 12-16 Str/Sol
Cu setscrew
3-12 Str; 10-12 Sol
HET-AW-RLC-J
X
Cu crimp
8-16; (2) 12-16 Str/Sol
Cu dual setscrew
2-12† Str; 10-12 Sol†
HET-AW-RYC
—
—
Cu crimp
8-16; (2) 12-16 Str/Sol
Al setscrew
2-12
—
RYA
—
—
Cu crimp
8-16; (2) 12-16 Str/Sol
Al dual setscrew
2-12†
—
RLC-A
X
X
Cu crimp
6; (2) 10
Cu crimp
8-16; (2) 12-16
—
RLC-B
X
X
Cu crimp
6; (2) 10
Cu crimp
6; (2) 10
HET-BW-RLC-B
RYC
X
X
Cu crimp
Cu dual setscrew
2-12† Str; 10-12 Sol†
—
RLC-J
X
X
Cu setscrew
3-12 Str; 10-12 Sol
Cu setscrew
3-12 Str; 10-12 Sol
HET-JW-RLC-J
RYC
X
X
Cu setscrew
3-12 Str; 10-12 Sol
Cu dual setscrew
2-12† Str; 10-12 Sol†
HET-JW-RYC
RLC-J
X
—
Cu dual setscrew
2-12 Str ; 10-12 Sol
Cu setscrew
3-12 Str; 10-12 Sol
—
RYC
X
—
Cu dual setscrew
2-12 Str†; 10-12 Sol†
Cu dual setscrew
2-12† Str; 10-12 Sol†
—
UL
CSA
Terminal type
AWG wire range*
RLC-A
X
X
Cu crimp
8-16; (2) 12-16 Str/Sol
RLC-B
X
X
Cu crimp
8-16; (2) 12-16 Str/Sol
RLC-C
X
X
Cu crimp
RLC-J
X
X
RYC
X
RLA
6; (2) 10
†
†
Terminal type
RLA
—
—
Al setscrew
2-12
Al setscrew
2-12
—
RLC-J
—
—
Al setscrew
2-12
Cu setscrew
3-12
—
RYA
—
—
Al setscrew
2-12
Al dual setscrew
2-12†
—
* Stranded conductors unless otherwise noted.
† Not dual wire rated. One wire per opening.
To order: specify catalog symbol HEB and the loadside terminal code plus the letter “W.” Then select a lineside terminal code that is
available with the loadside terminal. Example: HEB-BW-RCL-B defines a breakaway holder with a loadside copper crimp terminal for a single
#6 or two #10 wires with a lineside copper crimp terminal for a single #6 or two #10 wires.
Data sheet no. 2127
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-51
Fuse blocks and
holders
Breakaway catalog number system
8 — Fuse blocks and holders
Non-breakaway catalog number system
A
B
HEB
Lineside
terminal
Loadside
terminal
Catalog
symbol
HEB - A A
Agency information
Loadside terminal
Lineside terminal
AWG wire range*
HET neutral
equivalent
Cu crimp
8-16; (2) 12-16 Str/Sol
HET-AA
Cu crimp
6; (2) 10
HET-AB
8-16; (2) 12-16 Str/Sol
Cu crimp
4; (2) 8
—
Cu crimp
8-16; (2) 12-16 Str/Sol
Cu crimp
2; (2) 6
—
UL
CSA
Terminal type
AWG Wire range*
A
X
X
Cu crimp
8-16; (2) 12-16 Str/Sol
B
X
X
Cu crimp
8-16; (2) 12-16 Str/Sol
C††
X
X
Cu crimp
D††
X
X
Terminal type
J
X
X
Cu crimp
8-16; (2) 12-16 Str/Sol
Cu setscrew
K
X
X
Cu crimp
8-16; (2) 12-16 Str/Sol
Cu dual setscrew
3-12 Str; 10-12 Sol
—
2-12† Str; 10-12 Sol†
—
R
—
—
Cu crimp
8-16; (2) 12-16 Str/Sol
L
—
—
Cu crimp
8-16; (2) 12-16 Str/Sol
Al crimp
1-2
—
Al setscrew
2-12
W
—
—
Cu crimp
8-16; (2) 12-16 Str/Sol
Cu solid
—
—
HET-AW
Al dual setscrew
2-12†
—
Y
—
—
Cu crimp
8-16; (2) 12-16 Str/Sol
A
X
X
Cu crimp
6; (2) 10
Cu crimp
8-16; (2) 12-16 Str/Sol
—
B
X
X
Cu crimp
6; (2) 10
Cu crimp
6; (2) 10
HET-BB
C
X
X
Cu crimp
6; (2) 10
Cu crimp
4; (2) 8
—
D††
X
X
Cu crimp
6; (2) 10
Cu crimp
2; (2) 6
—
W
—
—
Cu crimp
6; (2) 10
Cu solid
—
—
C
C††
X
X
Cu crimp
4; (2) 8
Cu crimp
4; (2) 8
—
D
D
X
X
Cu crimp
2; (2) 6
Cu crimp
2; (2) 6
—
Z
A
—
—
Cu crimp
18-20
Cu crimp
8-16; (2) 12-16 Str/Sol
—
J
X
—
Cu setscrew
3-12 Str; 10-12 Sol
Cu setscrew
K
X
—
Cu setscrew
3-12 Str; 10-12 Sol
Cu dual setscrew
J
L
—
—
Cu setscrew
3-12 Str; 10-12 Sol
Al setscrew
W
—
—
Cu setscrew
3-12 Str; 10-12 Sol
Cu solid
3-12 Str; 10-12 Sol
HET-JJ
2-12 Str†; 10-12 Sol†
HET-JK
2-12
—
—
—
Al dual setscrew
2-12†
—
Al setscrew
2-12
—
Y
—
—
Cu setscrew
3-12 Str; 10-12 Sol
L
L
—
—
Al setscrew
2-12
N
N
—
—
Al crimp
8 Str ;6 Sol
Al crimp
8 Str; 6 Sol
—
P
P
—
X
Al crimp
6 Str; 4 Sol
Al crimp
6 Str; 4 Sol
—
Q
Q
—
X
Al crimp
3-4 Str; 2 Sol
Al crimp
3-4 Str; 2 Sol
—
R
R
—
X
Al crimp
1-2 Str
Al crimp
1-2
—
T
T
—
X
Al crimp
1/0 Str
Al crimp
1/0
—
W
W
—
—
Cu solid
—
Cu solid
—
—
* Stranded conductors unless otherwise noted.
† Not dual wire rated. One wire per opening.
To order: specify catalog symbol HEB and the loadside terminal code. Then select a lineside terminal code that is available with the loadside
terminal. Example: HEB-BB defines a non-breakaway holder with a loadside copper crimp terminal for a single #6 or two #10 wires with a
lineside copper crimp terminal for a single #6 or two #10 wires.
Data sheet no. 2127
HEZ waterproof single-pole breakaway and nonbreakaway Class CC in-line holder
HEZ submersible, single-pole in-line rejection
fuse holders are for UL Class CC fuses. They
are available in non-breakaway and breakaway
versions with terminal options to meet
application needs. Breakaway versions come with
insulating boots (for details, see HEB insulating
boot information) to provide submersibility per UL
IP67. The non-breakaway version requires ordering
optional insulating boots for submersibility.
Ratings
•
2011/65/EU
Agency information
•
UL Listed, Guide IZLT, File E14853
•
CSA Certified, Class 6225-01, File 47235
•
RoHS compliant
•
CE
Catalog no.
Type
Terminal
AWG range
HEZ-AA
Nonbreakaway
Line/load Cu crimp
8-16 (2) 12-16
Line/load Cu crimp
8-16 (2) 12-16
Line Cu crimp
8-16 (2) 12-16
Load Cu dual
setscrew†
2-12
HEZ-AW-RLC-A
Volts 600 V
•
Amps up to 30 A limited by conductor size
•
Withstand 200 kA RMS Sym.
Data sheet no. 2130
8-52
HEZ-AW-RYC
Breakaway
† Not dual wire rated, one wire per opening.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse blocks and holders — 8
Insulating boots
HEX (13/32" x 1-1/2" supplemental) and HEY
(Class CC) dual-pole breakaway and nonbreakaway in-line holders
Two insulating boots come standard with the breakaway holder
configurations. Insulating boots are not included as standard with
non-breakaway holders. Two insulating boots must be ordered
separately, if required, for each non-breakaway holder ordered. When
insulating boots are utilized, extra heat retention requires that fuses
are sized at a minimum of 200 percent of the RMS load current.
Breakaway and non-breakaway
submersible, dual-pole in-line fuse
holders available with terminal
options to meet application
needs. Breakaway versions come
with insulating boots to provide
submersibility per UL IP67. Nonbreakaway versions require ordering
optional insulating boots for
submersibility.
To order insulating boots for a non-breakaway HEB holder, use these
catalog numbers.
Ratings
Description
2A0660
Single conductor
2A0661
Dual conductor
Recommended crimping tools
Volts 600 V
This list is not intended to exclude the use of other crimping tools
that can provide similar crimps or indents.
Amps
•
Up to 30 A limited by conductor size (UL)
•
Up to 15 A limited by conductor size (CSA)
HEB terminal
T & B P/N (Die)
* Dependant upon fuse interrupting rating.
C
Agency information
N, P, Q, R, T
TBM5 (Brown)
Sta-Kon ERG4002 (C)
B
200 kA RMS Sym.*
HEB terminal T & B P/N (Die)
WT-111M (C)
A
SCCR
•
Catalog no.
D
TBM8 (Brown)
WT-115A (D)
WT-115A (F)
TBM5 (Grey)
WT-111M (A)
Z
WT-115A (E)
Sta-Kon ERG4002 (A)
TBM8 (Orange)
•
HEX; UL Recognized, Guide IZLT2, File E14853, CSA Certified,
Class 6225-01, File 47235, CE
HET neutral
•
HEY; UL Listed, Guide IZLT, File E14853, CSA Certified, Class
6225-01, File 47235, CE
The HET holder is a single-pole in-line holder with a
permanent, solid neutral for use along with the HEB
holder to provide a means of conductor continuity.
The HET holder is identified by a white, plastic
coupling nut. Available HET holder counterparts to
their HEB equivalents are listed in the following
catalog number tables. See data sheet no. 2125 for
details on the HET holder.
Breakaway catalog number system
Agency Information
Lineside
terminal
Loadside
terminal
Catalog
symbol
HE_ - A W - RYC
UL
CSA
Loadside terminal
Lineside terminal
Terminal type
AWG wire range*
Terminal type
AWG wire range*
HET neutral
equivalent
Cu crimp
8-16; (2) 12-16
Cu crimp
8-16; (2) 12-16
HET-AW_RLC-A
DRLC-A
A
X
X
DRLC-B
X
—
Cu crimp
8-16; (2) 12-16
Cu crimp
6; (2) 10
HET-AW_RLC-B
DRYC
X
—
Cu crimp
8-16; (2) 12-16
Cu dual setscrew
2-12†
HET-AW_RYC
J
DRYC
X
—
Cu setscrew
3-12
Cu dual setscrew
2-12†
HET-JW-RYC
K
DRYC
X
—
Cu dual setscrew
2-12†
Cu dual setscrew
2-12†
—
HEX
Class CC rejection fuse
HEY
A
DRLC-A
X
X
Cu crimp
8-16; (2) 12-16
Cu crimp
8-16; (2) 12-16
HET-AW_RLC-A
DRLC-B
X
—
Cu crimp
8-16; (2) 12-16
Cu crimp
6; (2) 10
HET-AW_RLC-B
DRLC-J
X
—
Cu crimp
8-12; (2) 12-16
Cu setscrew
3-12
HET-AW_RLC-J
DRYC
X
—
Cu crimp
8-16; (2) 12-16
Cu dual setscrew
2-12†
HET-AW_RYC
* Solid/stranded conductors unless otherwise noted.
† Not dual wire rated. One wire per opening.
To order: specify catalog symbol HEX and the loadside terminal code plus the letter “W.” Then select a lineside terminal code that is
available with the loadside terminal. Example: HEX-AW-DRCL-B defines a breakaway holder with a loadside copper crimp terminal for a
single #8-16 or two #12-16 wires with a lineside copper crimp terminal for a single #6 or two #10 wires.
Data sheet no. 2126
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
8-53
Fuse blocks and
holders
13/32" x 1-1/2" supplemental fuse
8 — Fuse blocks and holders
Non-breakaway catalog number system
Lineside
terminal
Loadside
terminal
Catalog
symbol
HE_ - A A
Agency information
UL
CSA
Loadside terminal
Lineside terminal
Terminal type
AWG Wire range*
Terminal type
AWG wire range*
HET neutral
equivalent
13/32" x 1-1/2" supplemental fuse
A
A
X
X
Cu crimp
8-16; (2) 12-16
Cu crimp
8-16; (2) 12-16
HET-AA
B
X
X
Cu crimp
8-16; (2) 12-16
Cu crimp
6; (2) 10
HET-AB
C
X
X
Cu crimp
8-16; (2) 12-16
Cu crimp
4 str; (2) 8
—
D
X
X
Cu crimp
8-16; (2) 12-16
Cu crimp
2 str; (2) 6
—
E
X
X
Cu crimp
8-16; (2) 12-16
Cu crimp
(2) 4
—
B
B
X
X
Cu crimp
6; (2) 10
Cu crimp
6; (2) 10
HET-BB
C
C
X
X
Cu crimp
4 str; (2) 8
Cu crimp
4 str; (2) 8
—
J
X
—
Cu setscrew
3-12
Cu setscrew
3-12
HET-JJ
K
X
—
Cu setscrew
3-12
Cu dual setscrew
2-12†
HET-JK
HEX
J
Class CC rejection fuse
A
A
X
X
Cu crimp
8-16; (2) 12-16
Cu crimp
8-16; (2) 12-16
HET-AA
B
X
X
Cu crimp
8-16; (2) 12-16
Cu crimp
6; (2) 10
HET-AB
C
X
X
Cu crimp
8-16; (2) 12-16
Cu crimp
4 str; (2) 8
—
D
X
X
Cu crimp
8-16; (2) 12-16
Cu crimp
2 str; (2) 6
—
E
X
X
Cu crimp
8-16; (2) 12-16
Cu crimp
(2) 4
—
B
B
X
X
Cu crimp
6; (2) 10
Cu crimp
6; (2) 10
HET-BB
J
J
X
—
Cu setscrew
3-12
Cu setscrew
3-12
HET-JJ
HEY
* Solid/stranded conductors unless otherwise noted.
† Not dual wire rated. One wire per opening.
To order: specify catalog symbol HE_ and the loadside terminal code. Then select a lineside terminal code that is available with the loadside
terminal. Example: HEX-BB defines a non-breakaway holder with a loadside copper crimp terminal for a single #6 or two #10 wires with a
lineside copper crimp terminal for a single #6 or two #10 wires.
Data sheet no. 2126
8-54
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Power distribution and terminal blocks — 9
Contents
Section
page
Description
Selecting power distribution blocks
2
Power distribution blocks
Maximize short-circuit current
rating up to 200 kA
PDBFS UL Listed finger-safe, high SCCR blocks
3-5
PDB UL Listed high SCCR open blocks
160, 162, 163, 164 and 165 UL Recognized open blocks
6-8
9-12
Power stud terminal blocks
162, 163 and 165 UL Recognized blocks
13-14
Power splicer blocks
160, 162, 163 and 165 UL Recognized blocks
15-16
Power terminal blocks
11675 250 V screw/quick-connect block
17
11725 600 V screw/quick-connect block
Barrier and deadfront terminal blocks
14002 600 V barrier block
17
14004 600 V dead front block
Simplify your panel design
To save panel space and reduce component count, Bussmann
series power distribution fuse blocks combine circuit protection
and power distribution into one unit. Available in Class H(K),
and R up to 60 amps and Class J up to 400 amps, with up to a
high 200 kA withstand rating. See these cost and space saving
products in Section 8, Fuse blocks and holders.
Power distribution
and terminal blocks
with Bussmann series
finger-safe power distribution
fuse blocks
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
9-1
9 — Power distribution and terminal blocks
Selecting SCCR power distribution blocks and
terminal blocks
Short-circuit current rated power distribution blocks
Bussmann series power distribution blocks have three distinct
styles to match different application needs. There are the PDBFS_
and PDB_ high short-circuit current rated power distribution blocks
and the 16_ power terminal blocks. The differences are whether the
power distribution blocks are enclosed or not, and whether they are
UL 1953 Listed power distribution blocks or UL 1059 Recognized
power terminal blocks, which have different minimum spacing
requirements. The table on this page will assist you in selecting
which block is right for your application.
Why these are important
Per the NEC and OSHA, equipment cannot be installed in an
electrical system at a location where the available fault (short-circuit)
current is greater than the equipment's SCCR.
Further, equipment SCCRs are required in the 2014 NEC and for UL
508A Listed control panels. Marking the equipment SCCR on control
panels (NEC 409.110), industrial machinery electrical panels (NEC
670.3(A)), and HVAC equipment (NEC 440.4(B)) is required by the
NEC.
Catalog
symbol
Power distribution and terminal blocks not marked with a component
SCCR are typically one of the weakest links in a control panel's
equipment SCCR and may limit the equipment SCCR to no more
than 10 kA. The PDBFS_ and PDB_ products have the increased
spacing required for use in feeder circuits of equipment listed to
UL 508A (UL 1059 terminal blocks must be evaluated for proper
spacings). Also, for building wiring systems, the PDBFS_ and
PDB_ power distribution blocks can be used to meet the 2014 NEC
requirements in section 376.56(B) for power distribution blocks in
wireways.
Selection table
The table below provides an overview of the three Bussmann
series power distribution and terminal blocks mentioned above. For
details on the PDB_ blocks, see data sheet number 10537. For the
16_ blocks, see data sheet numbers 10533 (UL Recognized power
distribution blocks), 10534 (splicer blocks) and 10535 (stud blocks).
Spacing ** 1”
air, 2” surface
UL 508A panel
branch circuit
UL 508A panel
feeder circuit
HVAC UL
1995
Wireways NEC
376.56(B) (requires
UL 1953)
Enclosed
High
SCCR*
PDBFS_
UL 1953
Listed power
distribution
blocks
Yes***
Yes
Yes
Yes
Yes
Yes
Yes
PDB_
UL 1953
Listed power
distribution
blocks
No†
Yes
Yes
Yes
Yes
Yes
Yes, with optional
cover
UL 1059
Recognized
terminal
blocks
No†
Yes
No††
Yes
No††
Yes
No
16_
UL status
* When protected by proper fuse class with maximum ampere rating specified or smaller.
** For details, see PDB and TB minimum spacing requirements for equipment table below.
*** IP20 finger-safe under specific conditions, see data sheet 10536.
† Optional covers are available. Not IP20, but provide a safety benefit.
†† No, except if single pole units installed with proper spacings.
Power distribution and terminal block minimum spacing requirements for equipment
Spacing between live parts of opposite polarity
UL standard
Through air @ 600 V
Over surface @ 600 V
Spacing between live parts and
grounded parts or enclosure @ 600 V
508A feeder circuits
1"
2"
1"
508A branch circuits
3/8"
1/2"
1/2"
1995 HVAC
3/8"
1/2"
1/2"
Note: Refer to specific UL standards for complete spacing details.
9-2
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Power distribution and terminal blocks — 9
PDBFS UL Listed finger-safe, high SCCR power
distribution blocks
These single pole, small footprint, high
Short-Circuit Current Rating (SCCR) power
distribution blocks provide IP20* fingersafe protection in a modular design that
permits dovetailing together the required
number of poles and still meet the UL
1953 minimum 1" and 2" spacing required
per UL 508A for feeder circuit applications
and per NEC for field installations.
Where:
•
The catalog symbol "PDBFS" defines the block as a finger-safe
design
•
The catalog number ending "204" in this example defines this
block's lineside and loadside characteristics covering the amp
rating, number of ports and wire sizes, etc.
•
See the catalog number table for details on the available
lineside/loadside characteristics.
Features
With SCCRs up to 200 kA, these blocks
help achieve compliance with NEC and
OSHA requirements by resolving a
common SCCR "weak link" in industrial
control panels.
To increase application flexibility, these
blocks feature dual-wire rated ports that
accept copper or aluminum conductors
while retaining a UL Listed status.
Catalog number example — PDBFS204 is a 1-pole block
2011/65/EU
With panel or 35mm DIN-Rail** mounting these blocks are suitable
for installation in wireways and industrial control panel feeder and
branch circuits.
•
IP20 finger-safe under specified conditions increases safety by
isolating energized connections
•
Wire-ready captive termination screws cannot be misplaced and
are shipped "backed out" to save time on conductor installation
•
Sliding DIN-Rail latch provides easy block mounting
•
For multiple pole applications, all single-pole units can be gang
mounted by using the interlocking dovetail pins that are preinstalled on the side of the blocks
•
Elongated panel-mounting holes provide greater flexibility and
installation ease when matching up with drilled panel holes
* See table on page 9-5.
** PDFFS504 panel mount only.
Dual wire port application
Ratings
•
Rated for dual wire port application to increase the possible
number of lineside and loadside connections. E.g., PDBFS220 can
accept two wires into the lineside port (4 - 14 Cu, 4 - 8 Al) and two
wires per port (eight connections total) on the loadside lug (8 - 14
Cu, 8 Al).
•
Dual wire applications are only viable when using two wires of the
same size, stranding, and insulating and conductor material.
Volts
•
600 V (UL)
•
690 V (IEC)
•
1000 V (self-certified)
•
Amps 175 to 760 A
•
Ferrule terminal application
•
SCCR Up to 200 kA (see table for circuit protection details)
•
Bussmann series PDBFS power distribution blocks are rated for
use with UL Listed ferrules (see catalog number table for details).
•
Ferrule applications allow for the use of a broader range of
conductor stranding and simulate a more efficient, solid wire
connection with the PDBFS terminal port.
•
Always use UL Listed ferrules in accordance with the
manufacturer's specifications and instructions.
Conductors†
•
Stranded 75°C copper and aluminum
•
Higher temperature rated conductors permitted with appropriate
derating
† As specified in the catalog number table.
Multi-pole block ganging
Agency information
•
UL 1953 Listed, Guide QPQS, File E256146
•
CSA Certified, Class 6228-01, File 47235
•
RoHS compliant
•
CE
Flammability rating
•
Dovetail feature permits easy ganging for multi-pole applications
UL 94 V0
PDBFS blocks can be ganged for the required number of poles.
How to order
•
From the catalog number table, select the catalog number
that defines the desired lineside/loadside port and conductor
characteristics
•
Order one block per pole for the application
•
Multiple single-pole blocks can be ganged together via the
dovetailing feature to form multi-pole configurations
To gang two or more blocks for DIN-Rail or panel mounting, place
them side-by-side and slide the dovetail pin of one block into the
reciprocal slot on the other until fully seated and both blocks are
coplanar.
Note: Dissimilar PDBFS blocks can be ganged. E.g., a PDBFS204
can be ganged with a PDBFS220. Ganging with a PDBFS504 (nonDIN Rail mount version) will prevent DIN-Rail mounting.
Data sheet no. 10536
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
9-3
Power distribution
and terminal blocks
•
9 — Power distribution and terminal blocks
Current
rating
(A)
Line/load port
configuration
Wire size
(Str/ferrule unless
noted)*
2/0 - 1 Cu/Al (Str)
2 - 3 Cu/Al
4 - 8 Cu/Al
10 - 12 Al (Str)
10 - 14 Cu
4 - 8 Cu/Al
10 - 14 Cu
2/0 - 1 Cu/Al (Str)
2 - 3 Cu/Al
4 - 8 Cu/Al
10 - 14 Cu
175
175
350kcmil - 2/0 Cu/Al (Str)
1
1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
500kcmil - 4/0 Cu/Al (Str)
1
3/0 - 1/0 Cu/Al (Str)
1-2
310
380
570
620
Lineside
Wires
per
Torque
Ports/
port N•m (lb-in) pole
1
1
12.4 (110)††
1
1
1
4.0 (35)
1
2
13.6 (120)
2
1
1
13.6 (120)
1
1-2
1-2
1 - 6 Cu/Al
1-2
300kcmil - 2/0 Cu/Al (Str)
1/0 Cu/Al (Str)
1 - 2 Cu/Al
1
1-2
1-2
4 Cu/Al (Str)
1-2
350kcmil - 2/0 Cu/Al (Str)
1/0 Cu/Al (Str)
1 - 4 Cu/Al
6 Cu/Al
1
1-2
1-2
2
500kcmil - 4/0 Cu/Al (Str)
1
3/0 - 1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
760
31.1 (275)
†
56.5 (500)
31.1 (275)†
Wire size
(Str/ferrule unless
noted)*
2/0 - 1 Cu/Al (Str)
2 - 3 Cu/Al
4 - 8 Cu/Al
10 - 12 Al (Str)
10 - 14 Cu
4 - 8 Cu/Al
10 - 14 Cu
4 - 6 Cu/Al (Str)
8 Cu
8 Al (Str)
10 - 14 Cu
350kcmil - 2/0 Cu/Al (Str)
1
1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
2 - 3 Cu/Al (Str)
4 Cu/Al
6 Cu/Al
8 Cu/Al
10 - 14 Cu
4 - 6 Cu/Al (Str)
8 Cu
8 Al (Str)
10 - 12 Al (Str)
10 - 14 Cu
350kcmil - 2/0 Cu/Al (Str)
1/0 Cu/Al (Str)
1 - 4 Cu/Al
6 Cu/Al
1
1
1-2
1-2
1-2
1
1
1-2
1
1-2
1
1-2
1-2
2
1
1
2
31.1 (275)†
2
56.5 (500)
2
Loadside
Max
Wires
per
Torque
Ports/ SCCR
port N•m (lb-in) pole (kA)**
1
1
12.4 (110)††
1
1
1
200
4.0 (35)
1
2
13.6 (120)
2
1
4.0 (35)
1
2.8 (25)
4
200
1-2
1-2
2.3 (20)
500kcmil - 4/0 Cu/Al (Str)
1
3/0 - 1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
31.1 (275)†
Catalog
no.
PDBFS204
PDBFS220
1
200
PDBFS303
6
200
PDBFS330
12
200
PDBFS377
31.1 (275)†
2
200
PDBFS500
56.5 (500)
2
200
PDBFS504
5.6 (50)
5.1 (45)
4.5 (40)
4.0 (35)
4.0 (35)
2.8 (25)
2.3 (20)
* 75°C wire (higher temperature rated wire acceptable with appropriate derating). Using a ferrule on a stranded conductor requires a correctly sized UL Listed ferrule (customer supplied) applied according to the manufacturer’s specifications. Ferrule ratings apply to copper wire only.
** See pages 9-4 and 9-5 for the tested upstream overcurrent protective devices necessary for achieving these SCCRs.
† Torque rating for dual wire and ferrule application is 30.5 N•m (270 lb-in).
†† Torque rating for ferrule application is 13.6 N•m (120 lb-in).
Upstream fusing for SCCR and minimum enclosure data
This table contains the tested SCCR levels for each PDBFS power distribution block using the specified lineside and loadside conductors and
Bussmann series Class J, RK1, RK5 and T fuses. Using these tested SCCR levels also requires the power distribution block be installed in an
enclosure with the minimum size indicated for each catalog number.
Conductors (AWG/kcmil)
Catalog no. Lineside
PDBFS204
2/0 - 8
PDBFS220
2/0 - 8
PDBFS303
350 - 6
PDBFS330
500 - 6
PDBFS377
PDBFS500
PDBFS504
Loadside
2/0 - 8
4 - 12
4 - 14
350 - 6
2-6
6 - 14
4
300 - 4
4 - 14
4
350
350 - 4
500
500 - 6
4
350
350 - 4
500
500 - 6
J — LPJ
200
200
175
200
400
400
200
175
600
400
200
600
600
600
600
600
Fuse class and maximum amps*
RK1 — LPN-RK (250 V) RK5 — FRN-R (250 V),
LPS-RK (600 V)
FRS-R (600 V)
100
60
100
60
100
30
100
60
200
100
200
100
100
60
100
30
400
200
200
100
100
60
400
200
400
200
400
200
600
200
400
200
T — JJN (300 V),
JJS (600 V)
200
200
175
200
400
400
200
175
600
400
200
600
600
600
800**
600
SCCR (kA)
200
200
100
50
200
200
50
100
200
100
50
50
200
100
200
100
Ampacities 75°C per NEC® Table 310.16 and UL 508A Table 28.1.
* Class G 60 A (SC-60) or less or Class CC 30 A (LP-CC-30, FNQ-R-30, KTK-R-30) or less are suitable for all SCCRs in this table.
** Class L 800 A (KRP-C 800_SP) or less fuses suitable for this particular SCCR case.
Data sheet no. 10536
9-4
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Min. enclosure
size (in)
16 x 16 x 6.75
16 x 16 x 6.75
36 x 30 x 12.625
24 x 20 x 6.75
24 x 20 x 6.75
36 x 30 x 12.625
36 x 30 x 12.625
Power distribution and terminal blocks — 9
Upstream circuit breakers for SCCR and minimum enclosure data
This table contains the tested SCCR levels for each PDBFS power distribution block using the specified lineside and loadside conductors
and Eaton and General Electric circuit breakers. Using these tested SCCR levels also requires the power distribution block be installed in an
enclosure with the minimum size indicated for each catalog number.
PDBFS SCCR as rated with Eaton circuit breakers
Catalog no.
PDBFS204
Suitable Cu conductors kcmil/AWG
Lineside
Loadside
2/0 - 8
2/0 - 8
SCCR, RMS
Sym. (kA)
65
Volts max
480
14
PDBFS330
500 - 3
2-8
480
25
PDBFS377
(2) 300 - 2
4
6
8
4
6
8
30
18
14
42
35
14
Overcurrent protection circuit breaker required
Type
Max amp
EGC125, E125C, EGH125, E125H
125
LGH400, L400H, LGE400, L400E,
LGS400, L400S
400
LGC400, L400C, LGU400, L400U,
LGX400, L400X
Min. enclosure size
(in.)
16 x 16 x 6.75
24 x 20 x 6.75
LGH600, L600H, LGE600, L600E,
LGS600, L600S
480
600
24 x 20 x 6.75
LGC600, L600C, LGU600, L600U,
LGX600, L600X
PDBFS SCCR as rated with General Electric circuit breakers
Catalog no.
Suitable Cu conductors kcmil/AWG
Lineside
Loadside
PDBFS204
2/0 - 8
PDBFS220
2/0 - 8
4 - 12
250 - 6
350 - 6
250 - 6
3/0 - 6
350 - 6
PDBFS303
2/0 - 8
SCCR, RMS
Sym. (kA)
65
25
65
25
65
35
65
250 - 6
PDBFS330
Volts max
480
SEHA
150
65
SFLA
250
SFHA
250
SELA
150
SEHA
150
480
65
3/0 - 6
480
25
35
2 - 12
480
Overcurrent protection circuit breaker required
Type
Max amp
SELA
150
SEHA
150
SELA
150
SEHA
150
SFLA
250
SFHA
250
SELA
150
25
Min. enclosure size
(in.)
16 x 16 x 6.75
16 x 16 x 6.75
24 x 20 x 6.75
24 x 20 x 6.75
Specified installation conditions for IP20 finger-safe ratings
This table contains the installed wire and trim lengths, and other conditions the PDBFS power distribution blocks need in order to be compliant
with IP20 specifications. IP20 compliance status is indicated in the lineside and loadside wire port and terminal screw opening columns.
Catalog no.
PDBFS204
PDBFS220
PDBFS303
PDBFS330
PDBFS377
PDBFS500
PDBFS504
Installed wire/state
2/0 - 8
Wire trim length in (mm)
0.85 (22)
2/0 - 8
0.75 (19)
350kcmil - 2/0
1/0 - 6
500 - 250kcmil
4/0 - 6
300kcmil - 4/0
3/0 - 4
Screws fully open
No wire in port
350kcmil - 2/0
1/0 - 4
Screws fully opened
No wire in port
500 - 350kcmil
300 - 6
Screws fully open
No wire in port
1.35 (34)
1.25 (32)
Top row 1.15 (29)
bottom row 1.4 (36)
1.25 (32)
1.25 (32)
Loadside
IP20 status
Terminal
Wire port
screw
opening
opening
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Yes
No
N/A
No
No
No
N/A
No
Yes
No
N/A
No
Yes
Yes
No
N/A
Yes
Yes
No
N/A
Yes
Yes
No
N/A
Installed wire/state
2/0 - 8
4 - 14
Screws fully opened
No wire in hole
350kcmil - 2/0
1/0 - 6
2 - 14
Screws fully opened
No wire in hole
4 - 14
Screws fully open
No wire in port
350kcmil - 2/0
1/0 - 4
Screws fully open
No wire in port
500 - 350kcmil
300 - 6
Screws fully opened
No wire in port
Wire trim length in (mm)
0.97 (25)
Top row 0.55 (14),
Bottom row 0.85 (22)
1.25 (32)
Top row 0.59 (15),
Bottom row 1.2 (30)
Top row 0.55 (14),
Middle row 1.00 (35),
Bottom row 1.22 (31)
IP20 status
Terminal
Wire port
screw
opening
opening
Yes
Yes
Yes
Yes
N/A
Yes
No
N/A
Yes
Yes
No
Yes
Yes
Yes
N/A
Yes
Yes
N/A
Yes
Yes
N/A
Yes
1.25 (32)
1.25 (32)
Yes
N/A
Yes
No
N/A
No
Yes
No
N/A
No
Yes
Yes
No
N/A
Yes
Yes
No
N/A
Data sheet no. 10536
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
9-5
Power distribution
and terminal blocks
Lineside
9 — Power distribution and terminal blocks
PDB UL Listed high SCCR open power
distribution blocks
High Short-Circuit Current Rating
(SCCR) power distribution blocks
provide up to 200 kA SCCR and
help achieve compliance with
NEC and OSHA requirements by
resolving a common SCCR “weak
link” in industrial control panels.
Available in 1-, 2- and 3-pole panel mount versions with popular
lineside and loadside port configurations, these blocks are UL Listed
with the requisite spacing between uninsulated opposite polarities or
ground by meeting the UL 1953 1” through air and 2” over surface
spacings required per UL 508A for feeder circuit applications and per
NEC for field installations.
Features
•
High SCCRs up to 200 kA, assist in achieving high SCCR for a
control panel per NEC and UL 508A requirements
•
In compliance with UL 1953 minimum spacing requirements for
industrial control panel feeder and branch circuits
•
Optional covers available to reduce the risk of accidental contact
with energized components
Dual wire port application
•
Rated for dual wire port application to increase the possible
number of lineside and loadside connections. E.g., PDB220 can
accept two wires into the lineside port (4-14 Cu, 4-8 Al) and two
wires per port (eight connections per pole total) on the loadside
lug (8-14 Cu, 8 Al).
To increase application flexibility, these blocks feature dual-wire rated
ports that accept copper or aluminum conductors while retaining a
UL Listed status.
•
Dual wire applications are only viable when using two wires of the
same size, stranding, and insulating and conductor material in the
same port
Optional covers are available to enhance electrical safety.
Ferrule terminal application
Ratings
•
Volts 600 V
•
Amps 175 to 310 A
•
SCCR 200 kA (see table for circuit protection details)
Conductors†
•
Bussmann series PDB power distribution blocks are rated for use
with UL Listed ferrules (see catalog number table for details)
•
Ferrule applications allow for the use of a broader range of
conductor stranding and simulate a more efficient, solid wire
connection with the PDB terminal port
•
Always use UL Listed ferrules in accordance with the
manufacturer’s specifications and instructions
•
Stranded 75°C copper and aluminum
Optional covers
•
Higher temperature rated conductors permitted with appropriate
derating
Electrical safety can be enhanced by installing optional covers.
†
As specified in the catalog number table.
Agency information
•
UL 1953 Listed, Guide QPQS, File E256146
•
CSA Certified, Class 6228-01, File 47235
•
CE
Flammability rating
•
UL 94 V0
How to order
From the catalog number table, select the catalog number
that defines the desired lineside/loadside port and conductor
characteristics.
Add to the catalog number the suffix that defines the desired pole
configuration. Note, you must select from the available number of
poles for each catalog number. These appear in the second column
of the catalog number tables.
Catalog number example — PDB323-3 is a 3-pole PDB323
Where:
From the table below, order the cover catalog number that matches
the block catalog number. Order the quantity indicated in the “order
quantity” column. E.g., the 3-pole block PDB204-3 requires ordering
three CPB162-1 covers (one cover for each pole).
Block catalog no.
PDB204-1
PDB204-3
PDB220-1
PDB220-3
PDB280-1
PDB280-3
PDB323-1
PDB323-3
PDB370-1
PDB370-3
PDB371-1
PDB371-3
PDB321-1
PDB321-2
PDB321-3
Poles
1
3
1
3
1
3
1
3
1
3
1
3
1
2
3
Cover catalog no.
CPB162-1
CPB162-1
CPB162-1
CPB162-1
CPB162-1
CPB162-1
CPDB-1
CPDB-1
CPDB-1
CPDB-1
CPDB-1
CPDB-1
CPDB-1*
CPDB-2*
CPDB-3*
Order quantity
1
3
1
3
1
3
1
3
1
3
1
3
1
1
1
* For the PDB321-_ blocks, order one cover for each block (not per pole).
•
The prefix “PDB323” defines the block’s lineside characteristics
(i.e., one conductor port per pole that accepts 350kcmil-6 Cu/Al
conductors) and the loadside characteristics (i.e., six (6) conductor
ports per pole that each accepts 4-14 Cu or 4-12 Al conductors)
•
The suffix “3” in this example defines this as a three-pole block
•
See the catalog number table for details on the available lineside/
loadside characteristics
Data sheet no. 10537
9-6
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Power distribution and terminal blocks — 9
Line/load port
configuration
Current
No. of rating
poles
(A)
1, 3
175
1, 3
175
1, 3
175
1, 2, 3
1, 3
1, 3
1, 3
175
310
310
310
Wire size
(Str/ferrule unless
noted)*
2/0 - 1 Cu/Al (Str)
2 - 3 Cu/Al
4 - 8 Cu/Al
10 - 12 Al (Str)
10 - 14 Cu
4 - 8 Cu/Al
10 - 14 Cu
2/0 - 1 Cu/Al (Str)
2 - 3 Cu/Al
4 - 8 Cu/Al
10 - 14 Cu
2/0 - 1 Cu/Al (Str)
2 - 3 Cu/Al
4 - 8 Cu/Al
10 - 14 Cu
2/0 - 1 Cu/Al (Str)
2 - 3 Cu/Al
4 - 8 Cu/Al
10 - 12 Al (Str)
10 - 14 Cu
Lineside
Wires
per
port
1
1
1
1
1
2
2
1
1
1-2
1-2
1
1
1-2
1-2
1
1
1-2
1
1-2
350kcmil - 2/0 Cu/Al (Str)
1
1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
350kcmil - 2/0 Cu/Al (Str)
1
1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
350kcmil - 2/0 Cu/Al (Str)
1
1/0 Cu/Al (Str)
1 - 6 Cu/Al
1-2
Loadside
Max
Wire size
Wires
Torque
Ports/ (Str/ferrule unless per
Torque
Ports/ SCCR Catalog
no.
N•m (lb-in) pole
noted)*
port N•m (lb-in) pole (kA)**
2/0 - 1 Cu/Al (Str)
1
2 - 3 Cu/Al
1
12.4 (110)††
12.4 (110)††
4 - 8 Cu/Al
1
1
10 - 12 Al (Str)
1
1
200 PDB204-_
4.0 (35)
4.0 (35)
10 - 14 Cu
1
4 - 8 Cu/Al
2
13.6 (120)
13.6 (120)
10 - 14 Cu
2
4 - 6 Cu/Al (Str)
1
4.0 (35)
8 Cu
1
13.6 (120)
1
2.8 (25)
4
200 PDB220-_
8 Al (Str)
1-2
10 - 14 Cu
1-2
2.3 (20)
13.6 (120)
13.6 (120)
31.1 (275)†
31.1 (275)†
31.1 (275)†
1
1
1
1
1
1-2
1/4-20 x 3/4” Stud
—
4 - 6 Cu/Al (Str)
8 Al (Str)
8 Cu
10 - 12 Al (Str)
10 - 14 Cu
4 - 6 Cu/Al (Str)
8 Al (Str)
8 Cu
10 - 12 Al (Str)
10 - 12 Cu
10 - 14 Cu
4 - 6 Cu/Al (Str)
8 Al (Str)
8 Cu
10 - 12 Al (Str)
10 - 14 Cu
2 - 3 Cu/Al (Str)
4 - 8 Al (Str)
6 - 8 Al (Str)
4 Cu
6 Cu
8 Cu
10 - 12 Cu
14 Cu
1/0 - 3 Cu/Al (Str)
4 - 6 Cu/Al
8 Cu/Al
10 - 12 Cu
6 - 14 Cu
4 - 6 Al (Str)
1
1-2
1
1
1-2
1
1-2
1
1
1
2
1
1-2
1
1
1-2
1
1
2
1
1-2
1-2
1-2
2
1
1
1
1
2
2
—
1
200
PDB280-_
6
200
PDB321-_
6
200
PDB323-_
12
200
PDB370-_
200
PDB371-_
4.0 (35)
2.8 (25)
4.0 (35)
2.3 (20)
4.0 (35)
2.8 (25)
4.0 (35)
2.3 (20)
4.0 (35)
2.8 (25)
4.0 (35)
2.3 (20)
5.6 (50)
5.1 (45)
6
4.5 (40)
4.0 (35)
5.6 (50)
5.1 (45)††
4.5 (40)††
4.0 (35)††
3
13.6 (120)
Power distribution
and terminal blocks
* 75°C wire (higher temperature rated wire acceptable with appropriate derating). Using a ferrule on a stranded conductor requires a correctly sized UL Listed ferrule
(customer supplied) applied according to the manufacturer’s specifications. Ferrule ratings apply to copper wire only.
** See page 9-8 for the tested upstream overcurrent protective devices necessary for achieving these SCCRs.
† Torque rating for dual wire and ferrule application is 30.5 N•m (270 lb-in).
†† Torque rating for ferrule application is 13.6 N•m (120 lb-in).
Data sheet no. 10537
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
9-7
9 — Power distribution and terminal blocks
Upstream fusing for SCCR and minimum enclosure data
This table contains the tested SCCR levels for each PDBFS power distribution block using the specified lineside and loadside conductors and
Bussmann series Class J, RK1, RK5 and T fuses. Using these tested SCCR levels also requires the power distribution block be installed in an
enclosure with the minimum size indicated for each catalog number.
Conductors (AWG/kcmil)
Fuse class and maximum amps*
RK1 — LPN-RK (250 RK5 — FRN-R (250 V), T — JJN (300 SCCR
V), LPS-RK (600 V)
FRS-R (600 V)
V), JJS (600 V) (kA)
Catalog no.
Lineside
Loadside
PDB204-1, -3
2/0 - 8
2/0 - 8
—
200
100
60
200
200
4 - 12
—
200
100
60
200
200
4 - 14
60
175
100
30
175
100
PDB220-1, -3
2/0 - 8
PDB280-1, -3
2/0 - 8
PDB321-1, -2, -3
2/0 - 8
PDB323-1, -3
350 - 4
PDB370-1, -3
350 - 4
PDB371-1, -3
350 - 4
G — SC (480 V)
J — LPJ
Stud
—
200
100
60
200
200
4 - 12
—
400
200
100
400
200
4 - 14
60
175
100
30
175
100
4-8
—
400
200
100
400
200
4 - 12
60
175
100
30
175
100
4-8
—
400
200
100
400
200
4 - 14
60
175
100
30
175
100
1/0 - 6
—
400
200
100
400
200
1/0 - 12
60
175
100
30
175
100
Min. enclosure
size (in)
16 x 16 x 6.75
16 x 16 x 6.75
16 x 16 x 6.75
24 x 20 x 6.75
24 x 20 x 6.75
24 x 20 x 6.75
24 x 20 x 6.75
Ampacities 75°C per NEC Table 310.16 and UL 508A Table 28.1.
* Class CC 30 A (LP-CC-30, FNQ-R-30, KTK-R-30) or less are suitable for all SCCRs in this table.
Upstream circuit breakers for SCCR and minimum enclosure data
This table contains the tested SCCR levels for each PDB power distribution block using the specified lineside and loadside conductors
and Eaton circuit breakers. Using these tested SCCR levels also requires the power distribution block be installed in an enclosure with the
minimum size indicated for each catalog number.
PDB_ SCCR as rated with Eaton circuit breakers
Suitable Cu conductors kcmil/AWG
Catalog no.
PDB220
PDB321
Lineside
Loadside
2/0 - 8
4 - 10
65
2/0 - 8
22
Type
Max amp
480
EGC125, E125C, EGH125, E125H
125
480
EGC125, E125C, EGE125, E125E, EGS125, E125S,
EGH125, E125H
125
125
2/0 - 8
14
14
480
2/0 - 8
4 - 10
65
480
EGC125, E125C, EGH125, E125H
125
2/0 - 8
12
22
480
EGC125, E125C, EGE125, E125E, EGS125, E125S,
EGH125, E125H
125
480
EGC125, E125C, EGB125, E125B, EGE125, E125E,
EGS125, E125S, EGH125, E125H
125
2/0 - 8
14
350 - 4
4-6
65
480
JGH250, J250H
250
350 - 4
8
42
480
JGH250, J250H
250
480
JGH250, J250H, JGE250, J250E, JGS250, J250S,
250
PDB323
350 - 4
14
10
14
4-6
65
8
42
10
25
8
50
10
25
480
JGC250, J250C, JGU250, J250U, JGX250, J250X
65
480
JGH250, J250H
250
350 - 4
8
42
480
JGH250, J250H
250
480
JGH250, J250H, JGE250, J250E, JGS250, J250S,
250
480
JGC250, J250C, JGU250, J250U, JGX250, J250X
250
10
14
4-6
65
8
42
10
25
350 - 4
4-6
50
480
JGH250, J250H
250
350 - 4
8
42
480
JGH250, J250H
250
480
JGH250, J250H, JGE250, J250E, JGS250, J250S,
250
480
JGC250, J250C, JGU250, J250U, JGX250, J250X
250
350 - 4
350 - 4
10
14
4-6
65
8
50
10
25
Data sheet no. 10537
9-8
16 x 16 x 6.75
24 x 20 x 6.75
250
4-6
350 - 4
Min.
enclosure
size (in.)
24 x 20 x 6.75
350 - 4
350 - 4
PDB371
12
Volts
max
EGC125, E125C, EGB125, E125B, EGE125, E125E,
EGS125, E125S, EGH125, E125H
350 - 4
PDB370
Overcurrent protection circuit breaker required
SCCR, RMS
Sym. (kA)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
24 x 20 x 6.75
24 x 20 x 6.75
Power distribution and terminal blocks — 9
160, 162, 163, 164 and 165 UL Recognized open
power distribution blocks
UL Recognized power distribution
blocks offer a variety of lineside
and loadside port configurations
for greater flexibility in panel
wiring and wire management.
These blocks are UL Recognized
to UL 1059 and rated for use in
UL 508A industrial control panels.
Blocks are factory configured in 1-,
2 and 3-pole versions, and have
optional covers to enhance safety
(order covers separately).
Dual wire port application
•
Rated for dual wire port application to increase the possible
number of lineside and loadside connections. E.g., 16220-1 can
accept two wires into the lineside port (4 - 14 Cu, 4 - 8 Al) and two
wires per port (eight connections total) on the loadside lug (8 - 14
Cu, 8 Al).
•
Dual wire applications are only viable when using two wires of the
same size, stranding, and insulating and conductor material.
Ferrule terminal application
•
Bussmann series UL Recognized power distribution blocks are
rated for use with UL Listed ferrules (see catalog number table for
details).
•
Ferrule applications allow for the use of a broader range of
conductor stranding and simulate a more efficient, solid wire
connection with the terminal port.
•
Always use UL Listed ferrules in accordance with the
manufacturer’s specifications and instructions.
Ratings
•
Volts 600 V
•
Amps 175 to 1520 A
•
SCCR up to 200 kA* (see table for SCCR by catalog number)
* Maximum SCCR contingent upon the application of an upstream current-limiting
overcurrent protective device. See table for fusing requirements.
Conductors†
•
Stranded 75°C copper and aluminum
•
Higher temperature rated conductors permitted with appropriate
derating
†
As specified in the catalog number table.
Agency information
•
UL 1059 Recognized, Guide XCFR2, File E62622
•
CSA Certified, Class 6228-01, File 15364
Optional covers
For block catalog number starting
160__
162__
163__
165__
Order cover catalog number
CPB160-(poles)*
CPB162-(poles)*
CPDB-(poles)*
CPDB165**
* Order one cover for each block by specifying the number of poles in the catalog
number suffix. E.g., For the block catalog number 16021-4, order the cover
catalog number CPD160-4.
** Order one cover for each of the block’s poles. E.g., For block catalog number
16530-3, order three of cover catalog number CPDB165.
Flammability rating
•
UL 94 V0
Optional covers
•
See table for catalog numbers and ordering details
How to order
From the catalog number tables, select the catalog number
that defines the desired lineside/loadside port and conductor
characteristics.
Add to the catalog number the suffix that defines the desired pole
configuration. Note, you must select from the available number of
poles for each catalog number. These appear in the second column
of the catalog number tables.
Catalog number example — 16220-3 is a 3-pole 16220
•
The prefix “16220” defines the block’s lineside characteristics (i.e.,
one conductor port per pole that accepts 2/0 - 14 Cu, or 2/0 - 8 Al
conductors) and the loadside characteristics (i.e., four conductor
ports per pole that each accepts 4 - 14 Cu or 4 - 8 Al conductors)
•
The suffix “3” in this example defines this as a three-pole block
•
See the catalog number tables for details on the available lineside/
loadside characteristics
Power distribution
and terminal blocks
Where:
Data sheet no. 10533
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
9-9
9 — Power distribution and terminal blocks
Line/load port
configuration
Current
No. of rating
poles
(A)
2, 3, 4
1, 2, 3
1, 2, 3
1, 2, 3
2,3,4
1, 2, 3
175
175
175
175
310
310
Lineside
Wires
Wire size (Sol/ferrule
per
unless noted)*
port
2/0 - 1 Cu/Al (Str)
1
2 - 3 Cu/Al
1
4 - 8 Cu/Al
10 - 14 Cu
2/0 - 1 Cu/Al (Str)
2 - 3 Cu/Al
4 - 8 Cu/Al
10 - 14 Cu
2/0 - 1 Cu/Al (Str)
2 - 3 Cu/Al
4 - 8 Cu/Al
10 - 14 Cu
2/0 - 1 Cu/Al (Str)
2 - 3 Cu/Al
4 - 8 Cu/Al
10 - 14 Cu
350kcmil - 2/0 Cu/Al (Str)
1-2
1-2
1
1
1-2
1-2
1
1
1-2
1-2
1
1
1-2
1-2
1
1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
350kcmil - 2/0 Cu/Al (Str)
1
1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
350kcmil - 2/0 Cu/Al (Str)
1, 2, 3
1, 2, 3
1, 2, 3
1-2
1 - 6 Cu/Al
1-2
350kcmil - 2/0 Cu/Al (Str)
1
1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
350kcmil - 2/0 Cu/Al (Str)
1
1/0 Cu/Al (Str)
1-2
310
310
13.6 (120)
13.6 (120)
13.6 (120)
31.1 (275)††
31.1 (275)††
31.1 (275)††
1/0 Cu/Al (Str)
31.1 (275)††
31.1 (275)††
1 - 6 Cu/Al
1, 2, 3
13.6 (120)
Loadside
Wires
Ports/ Wire size (Sol/ferrule per
pole
unless noted)*
port
4 - 6 Cu/Al (Str)
1
1
1
1
1
1
1
1
310
310
Torque
N•m
(lb-in)
1
1
1
1-2
350kcmil - 2/0 Cu/Al (Str)
1
1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
31.1 (275)††
1
8 Cu
1
8 Al (Str)
10 - 14 Cu
4 - 6 Cu/Al (Str)
8 Cu
8 Al (Str)
10 - 14 Cu
4 - 6 Cu/Al (Str)
8 Cu
8 Al (Str)
10 - 14 Cu
4 - 6 Cu/Al (Str)
8 Cu
8 Al (Str)
10 - 14 Cu
4 - 6 Cu/Al (Str)
8 Cu
8 Al (Str)
10 - 12 Al (Str)
10 - 14 Cu
4 - 6 Cu/Al (Str)
8 Cu
8 Al (Str)
10 - 12 Al (Str)
10 - 14 Cu
2 - 3 Cu/Al (Str)
4 Cu/Al
6 Cu/Al
8 Cu/Al
10 - 14 Cu
1/0 - 3 Cu/Al (Str)
4 Cu
4 - 8 Al (Str)
6 - 14 Cu
4 - 6 Cu/Al (Str)
8 Cu
8 Al (Str)
10 - 12 Al (Str)
10 - 14 Cu
2 - 3 Cu/Al (Str)
4 - 6 Cu/Al (Str)
8 Cu/Al (Str)
10 - 14 Cu (Str)
1/0 - 3 Cu/Al (Str)
4 - 8 Cu/Al
10 - 14 Cu
6 - 14 Cu
4 - 8 Al (Str)
1-2
1-2
1
1
1-2
1-2
1
1
1-2
1-2
1
1
1-2
1-2
1
1
1-2
1
1-2
1
1
1-2
1
1-2
1
1
1-2
1-2
1-2
1
1
1-2
1-2
1
1
1-2
1
1-2
1
1
1
1
1
1
1
2
2
10 Cu/Al
1
12 - 14 Cu
1
Torque
N•m
(lb-in)
4.0 (35)
2.8 (25)
Max
Ports/ SCCR
(kA)† Catalog no.
pole
6
10
16021-_
4
200
16220-_
4
200
16220_H†††
6
200
16321-_
6
10
16023-_
6
200
16323-_
10
16332-_
200
16370-_
200
16371-_
10
16372-_
2.3 (20)
4.0 (35)
2.8 (25)
2.3 (20)
4.0 (35)
2.8 (25)
2.3 (20)
4.0 (35)
2.8 (25)
2.3 (20)
4.0 (35)
2.8 (25)
2.3 (20)
4.0 (35)
2.8 (25)
2.3 (20)
5.6 (50)
5.1 (45)
3
4.5 (40)
4.0 (35)
13.6 (120)
2
4.0 (35)
2.8 (25)
12
2.3 (20)
5.6
5.1
4.5
4.0
(50)
(45)
(40)
(35)
6
13.6 (120)
3
0.8 (7)
21
*
75°C wire (higher temperature rated wire acceptable with appropriate derating). Using a ferrule on a stranded conductor requires a correctly sized UL Listed ferrule
(customer supplied) applied according to the manufacturer’s specifications. Ferrule ratings apply to copper wire only.
** Not covered by CSA certification.
† See Short-Circuit Current Ratings table for the tested upstream overcurrent protective devices necessary for achieving these SCCRs.
†† Torque rating for dual wire and ferrule application is 30.5 N•m (270 lb-in).
††† Configuration includes hex screws.
Data sheet no. 10533
9-10
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Power distribution and terminal blocks — 9
Lineside
Line/load port
configuration
No. of
poles
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
Current
rating
(A)
Loadside
Wire size (Sol/ferrule
unless noted)*
Wires Torque
per
N•m
port
(lb-in)
350kcmil - 2/0 Cu/Al (Str)
1
1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
2/0 - 1 Cu/Al (Str)
2 - 3 Cu/Al
4 - 8 Cu/Al
10 - 14 Cu
1-2
1
1
1-2
1-2
500kcmil - 4/0 Cu/Al (Str)
1
3/0 - 1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
500kcmil - 4/0 Cu/Al (Str)
1
310
350
380
380
380
420
31.1 (275)††
3/0 - 1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
500kcmil - 4/0 Cu/Al (Str)
1
3/0 - 1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
600kcmil - 2 Cu/Al (Str)
1
13.6 (120)
56.5 (500)
56.5 (500)
56.5 (500)
56.5 (500)
Ports/ Wire size (Sol/ferrule
pole
unless noted)*
10 Cu/Al
12 - 14 Cu
1/0 - 3 Cu/Al (Str)
1
4 Cu
6 - 14 Cu
4 - 8 Al (Str)
10 - 14 Al (Str)
4 - 6 Cu/Al (Str)
8 Cu
2
8 Al (Str)
10 - 14 Cu
2 - 3 Cu/Al (Str)
4 Cu/Al
6 Cu/Al
1
8 Cu/Al
10 - 12 Al (Str)
10 - 14 Cu
2 - 3 Cu/Al (Str)
4 Cu/Al
6 Cu/Al
8 Cu/Al
1
10 - 14 Cu
1/0 - 3 Cu/Al (Str)
4 Cu
4 - 8 Al (Str)
6 - 14 Cu
6 Cu/Al (Str)
8 Cu
1
8 Al (Str)
10 - 14 Al (Str)
10 - 14 Cu
4 - 6 Cu/Al (Str)
8 Cu
1
8 Al (Str)
10 - 12 Al (Str)
10 - 14 Cu
Wires
per
port
1
1
1
1
1-2
1-2
1
1
1
1-2
1-2
1
1
1-2
1-2
1
1-2
1
1
1-2
1-2
1-2
1
1
1-2
1-2
1
1
1-2
1
1-2
1
1
1-2
1
1-2
Torque
N•m
(lb-in)
Max
Ports/ SCCR
(kA)†
pole
0.8 (7)
14
Catalog
no.
10
16373_
6
10
16325_
6
10
16330_
10
16335_
21
10
16541_
12
10
16375_
13.6 (120) 3
4.0 (35)
2.8 (25)
2.3 (20)
5.6 (50)
5.1 (45)
4.5 (40)
4.0 (35)
5.6 (50)
5.1 (45)
3
4.5 (40)
4.0 (35)
13.6 (120) 2
4.0 (35)
2.8 (25)
2.3 (20)
4.0 (35)
2.8 (25)
2.3 (20)
* 75°C wire (higher temperature rated wire acceptable with appropriate derating). Using a ferrule on a stranded conductor requires a correctly sized UL Listed ferrule
(customer supplied) applied according to the manufacturer’s specifications. Ferrule ratings apply to copper wire only.
† See Short-Circuit Current Ratings table for the tested upstream overcurrent protective devices necessary for achieving these SCCRs.
†† Dual wire and ferrule application torque rating = 30.5 N•m (270 lb-in).
Short-Circuit Current Rating (SCCR) data
Conductors (AWG/kcmil)
16220-_
16321-_
16323-_
16370-_
16371-_
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
Lineside
2/0 - 8
2/0 - 8
350 - 4
350 - 4
350 - 4
Loadside
J — LPJ
RK1 — LPN-RK
(250 V),
LPS-RK (600 V)
4 - 12
200
200
60
200
4 - 14
175
100
60
175
100
400
200
100
400
200
4 - 12
4-8
RK5 — FRN-R (250
V),
FRS-R (600 V)
T — JJN (300 V),
JJS (600 V)
SCCR (kA)
200
175
100
60
175
100
400
200
100
400
200
4 - 12
175
100
60
175
100
4-8
400
200
100
400
200
4 - 14
175
100
60
175
100
1/0 - 6
400
200
100
400
200
1/0 - 12
175
100
60
175
100
Power distribution
and terminal blocks
Catalog no.
No. of
poles
Fuse Class/Bussmann series symbol/amp rating
Data sheet no. 10533
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
9-11
9 — Power distribution and terminal blocks
Line/load port
configuration
Current
No. of rating
poles
(A)
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1
Wire size
(Str/ferrule unless
noted)*
Lineside
Wires
per
Torque
Ports/
port N•m (lb-in) pole
420
600kcmil - 2 Cu/Al (Str)
1
56.5 (500)
1
570
300kcmil - 2/0 Cu/Al (Str)
1/0 Cu/Al (Str)
1 - 2 Cu/Al
1
1-2
1-2
31.1 (275)††
2
4 Cu/Al (Str)
1-2
500kcmil - 4/0 Cu/Al (Str)
3/0 - 1/0 Cu/Al (Str)
1
1-2
56.5 (500)
2
56.5 (500)
2
56.5 (500)
4
760
840
1520
1 - 6 Cu/Al
1-2
600kcmil - 2 Cu/Al
1
500kcmil - 4/0 Cu/Al (Str)
1
3/0 - 1/0 Cu/Al (Str)
1-2
1 - 6 Cu/Al
1-2
Wire size
(Str/ferrule unless
noted)*
2 - 3 Cu/Al (Str)
4 Cu/Al
6 Cu/Al
8 Cu/Al
10 - 14 Cu
1/0 - 3 Cu/Al (Str)
4 Cu
6 - 14 Cu
4 - 8 Al (Str)
4 - 6 Cu/Al (Str)
8 Cu
8 Al (Str)
10 - 12 Al (Str)
10 - 14 Cu
4 - 6 Cu/Al (Str)
8 Cu
8 Al (Str)
10 - 14 Al (Str)
10 - 14 Cu
3/0 - 6 Cu/Al (Str)
4 - 6 Cu/Al (Str)
8 Cu
8 Al (Str)
10 - 14 Al (Str)
10 - 14 Cu
2 - 3 Cu/Al (Str)
4 Cu/Al
6 Cu/Al
8 Cu/Al
10 - 14 Cu
1/0 - 3 Cu/Al (Str)
4 Cu
4 - 8 Al (Str)
6 - 14 Cu
Loadside
Max
Wires
per
Torque
Ports/ SCCR Catalog
no.
port N•m (lb-in) pole (kA)†
1
5.6 (50)
1
5.1 (45)
1-2
6
1-2
4.5 (40)
1-2
4.0 (35)
10 16376-_
1
1
13.6 (120)
3
1-2
1-2
1
4.0 (35)
1
2.8 (25)
1-2
12
10 16377-_
1
2.3 (20)
1-2
1
4.0 (35)
1
2.8 (25)
1-2
12
10 16530-_
1
2.3 (20)
1-2
1
13.6 (120)
4
1
4.0 (35)
1
2.8 (25)
10 16528-_
1-2
4
1
2.3 (20)
1-2
1
5.6 (50)
1
5.1 (45)
1-2
22
1-2
4.5 (40)
1-2
4.0 (35)
10 16400
1
1
13.6 (120)
6
1-2
1-2
* 75°C wire (higher temperature rated wire acceptable with appropriate derating). Using a ferrule on a stranded conductor requires a correctly sized UL Listed ferrule
(customer supplied) applied according to the manufacturer’s specifications. Ferrule ratings apply to copper wire only.
† See Short-Circuit Current Ratings table for the tested upstream overcurrent protective devices necessary for achieving these SCCRs.
†† Dual wire and ferrule application torque rating = 30.5 N•m (270 lb-in).
Data sheet no. 10533
9-12
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Power distribution and terminal blocks — 9
Port-to-stud and stud-to-stud power
terminal blocks are available with current
ratings up to 760 A. These blocks provide
a convenient stud connection means for
lug/ring wire terminals.
Factory configured from 1- to 3-poles
(catalog number dependent) with
optional covers to enhance safety (order
covers separately), these blocks are UL
Recognized to UL 1059 and rated for use
in UL 508A industrial control panels.
Dual wire port application
•
Rated for dual wire port application to increase the possible number
of lineside and loadside connections. E.g., 16280-1 can accept two
wires into the lineside port (#4 - #8 Cu/Al, #10 - #14 Cu).
•
Dual wire applications are only viable when using two wires of the
same size, stranding, and insulating and conductor material in the
same port
Ferrule terminal application
•
Bussmann series stud blocks are rated for use with UL Listed
ferrules (see catalog number table for details). Ferrule ratings apply
to copper wire only.
•
Ferrule applications allow for the use of a broader range of
conductor stranding and simulate a more efficient, solid wire
connection with the terminal port
•
Always use UL Listed ferrules in accordance with the
manufacturer’s specifications and instructions
Ratings
•
Volts 600 V
•
Amps 150 up to 760 A
•
SCCR up to 200 kA* (see table for SCCR by catalog number)
* Maximum SCCR contingent upon the application of an upstream current-limiting
overcurrent protective device. See table for fusing requirements.
Conductors†
•
Stranded 75°C copper and aluminum
•
Higher temperature rated conductors permitted with appropriate
derating
†
As specified in the catalog number table.
Agency information
•
UL 1059 Recognized, Guide XCFR2, File E62622
•
CSA Certified, Class 6228-01, File 15364
Flammability rating
•
UL 94 V0
Optional covers
•
See table for catalog numbers specific to each block
How to order
From the catalog number tables, select the catalog number
that defines the desired lineside/loadside port and conductor
characteristics.
Add to the catalog number the suffix that defines the desired pole
configuration. Note, you must select from the available number of
poles for each catalog number. These appear in the second column
of the catalog number tables.
Catalog number example — 16280-3 is a 3-pole 16280
Where:
•
The prefix “16280” defines the block’s lineside characteristics
(i.e., one conductor port per pole that accepts 2/0 - 14 Cu/Al
conductors) and the loadside characteristics (i.e., 1/4-20 x 3/4”
stud)
•
The suffix “3” in this example defines this as a three-pole block
•
See the catalog number tables for details on the available lineside/
loadside characteristics
Optional covers
Electrical safety can be enhanced by installing optional covers. From
the table below, order the cover catalog number that matches the
block catalog number.
Block catalog no.
16280-1
16280-2
16280-3
16280-2-M
16280-3-M
16281-1
16281-2
16281-3
16290-1
16290-2
16290-3
16378-1
16378-2
16378-3
16383-1
16383-2
16383-3
16390-1
16390-2
16390-3
16392-1-H
16392-2-H
16392-3-H
16394-1
16394-2
16394-3
16395-1
16395-2
16395-3
16582-1
16582-2
16582-3
16591-1
16591-2
16591-3
16593-1
16593-2
16593-3
Poles
1
2
3
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
Cover catalog no.
CPB162-1*
CPB162-2*
CPB162-3*
CPB162-2*
CPB162-3*
CPB162-1*
CPB162-2*
CPB162-3*
CPB162-1*
CPB162-2*
CPD162-3*
CPDB-1*
CPDB-2*
CPDB-3*
CPDB-1*
CPDB-2*
CPDB-3*
CPDB-1*
CPDB-2*
CPDB-3*
CPDB-1*
CPDB-2*
CPDB-3*
CPDB-1*
CPDB-2*
CPDB-3*
CPDB-1*
CPDB-2*
CPDB-3*
CPDB165**
CPDB165**
CPDB165**
CPDB165**
CPDB165**
CPDB165**
CPDB165**
CPDB165**
CPDB165**
Power distribution
and terminal blocks
162, 163 and 165 UL Recognized stud power
terminal blocks
* Cover catalog number provides one individual cover for each block.
** Order one cover for each pole.
Data sheet no. 10535
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
9-13
9 — Power distribution and terminal blocks
Lineside
Line/load
configuration
No. of
poles
Current
rating
(A)
Wire/stud size
(Str/ferrule unless noted)*
Loadside
Wires
per
port
Torque
N•m
(lb-in)
Ports/
pole
Stud/
connector size
Studs/
pole
SCCR
(kA)
13.6 (120)
1
1/4-20 x 3/4” stud
1
200†
16280-_**
13.6 (120)
1
M6 x 1” stud
1
200†
16280-_-M
13.6 (120)
1
1/4-20 tapped hole
1
10
16281-_**
56.5 (500)
1
1/4-20 x 1” stud
2
10
16378-_
56.5 (500)
1
3/8-16 x 1” stud
1
10
16383-_
56.5 (500)
2
3/8-16 x 1-5/8” stud
2
10
16582-_
Catalog no.
Connector - to - stud
2/0 - 1 Cu/Al (Str)
1, 2, 3
2 - 3 Cu/Al
175
4 - 8 Cu/Al
1-2
10 - 14 Cu
2/0 - 1 Cu/Al (Str)
2, 3
2 - 3 Cu/Al
175
4 - 8 Cu/Al
10 - 14 Cu
2 - 3 Cu/Al
175
4 - 8 Cu/Al
10 - 14 Cu
380
3/0 - 1/0 Cu/Al (Str)
1 - 6 Cu/Al
500kcmil - 4/0 Cu/Al (Str)
1, 2, 3
380
3/0 - 1/0 Cu/Al (Str)
1 - 6 Cu/Al
500kcmil - 4/0 Cu/Al (Str)
1, 2, 3
760
1
1-2
500kcmil - 4/0 Cu/Al (Str)
1, 2, 3
1
1-2
2/0 - 1 Cu/Al (Str)
1, 2, 3
1
3/0 - 1/0 Cu/Al (Str)
1 - 6 Cu/Al
1
1-2
1
1-2
1
1-2
Stud - to - stud
1, 2, 3
175
1/4-20 x 3/4” stud
1
1/4-20 x 3/4” stud
1
10
16290-_**
1, 2, 3
250
3/8-16 x 1-1/8” stud
1
3/8-16 x 1-1/8” stud
1
10
16390-_
1, 2, 3
310
3/8-16 x 1-7/16” stud
1
1/4-20 x 9/16” stud
2
10
16395-_
1, 2, 3
400
3/8-16 x 1-1/8” stud
1
3/8-16 x 1-1/8” stud
1
10
16392-_-H††
1, 2, 3
400
1/2-13 x 1-1/16” stud
1
1/2-13 x 1-1/16” stud
1
10
16394-_
1, 2, 3
400
3/8-16 x 1-7/16” stud
1
3/8-16 x 1-7/16” stud
2
10
16591-_**
1, 2, 3
600
1/2-13 x 1” stud
1
1/2-13 x 1” stud
1
10
16593-_
* 75°C wire (higher temperature rated wire acceptable with appropriate derating). Using a ferrule on a stranded conductor requires a correctly sized UL Listed ferrule
(customer supplied) applied according to the manufacturer’s specifications. Ferrule ratings apply to copper wire only.
** Not covered by CSA certification.
† See table below for the tested upstream overcurrent protective devices necessary for achieving this SCCR.
†† Configuration includes washers and hex nuts for each stud.
Short-Circuit Current Rating (SCCR) data for block 16280-_
Conductors (AWG)
Catalog
no.
No. of
poles
Lineside
16280-_
1, 2, 3
2/0 - 8
Fuse class/Bussmann series symbol/amp rating
Loadside
Class J
LPJ
Class RK1
LPN-RK (250 V)
LPS-RK (600 V)
Class RK5
FRN-R (250 V)
FRS-R (600 V)
Class T
JJN (300 V)
JJS (600 V)
SCCR (kA)
1/4-20x3/4 stud
200
200
60
200
200
Data sheet no. 10535
9-14
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Power distribution and terminal blocks — 9
160, 162, 163 and 165 UL Recognized power
splicer blocks
Splicer blocks allow for increasing
or decreasing wire size within a
circuit to accommodate different
connections from the power
source to the branch load.
These blocks are factory
configured from 1- to 4-poles
(catalog number dependent) for
wire sizes up to 500kcmil and
amp ratings up to 760 A. Optional
covers are available to enhance
safety (order covers separately).
These blocks are UL Recognized to UL 1059 and rated for use in UL
508A industrial control panels.
Ratings
•
Volts 600 V
•
Amps 115 to 760 A
•
SCCR up to 200 kA* (see table for SCCR by catalog number)
Dual wire port application
•
Rated for dual wire port application to increase the possible
number of lineside and loadside connections. E.g., 16303-1 can
accept two wires into the lineside port (1/0 - #6 Cu/Al) and two
wires per port (2 connections per pole total) on the loadside lug
(1/0 - #6 Cu/Al).
•
Dual wire applications are only viable when using two wires of the
same size, stranding, and insulating and conductor material in the
same port.
Ferrule terminal application
•
Bussmann series splicer blocks are rated for use with UL Listed
ferrules (see catalog number table for details). Ferrule ratings apply
to copper wire only.
•
Ferrule applications allow for the use of a broader range of
conductor stranding and simulate a more efficient, solid wire
connection with the PDB terminal port
•
Always use UL Listed ferrules in accordance with the
manufacturer’s specifications and instructions
Optional covers
Conductors†
Electrical safety can be enhanced by installing optional covers. From
the table below, order the cover catalog number that matches the
block catalog number.
Block catalog no.
Poles
Cover catalog no.
•
Stranded 75°C copper and aluminum
16000-2
2
CPB160-2*
•
Higher temperature rated conductors permitted with appropriate
derating
16000-3
3
CPB160-3*
16000-4
4
CPB160-4*
16003-2
2
CPB160-2*
16003-3
3
CPB160-3*
16003-4
4
CPB160-4*
16005-2
2
CPB160-2*
†
As specified in the catalog number table.
Agency information
•
UL 1059 Recognized, Guide XCFR2, File E62622
16005-3
3
CPB160-3*
•
CSA® Certified, Class 6228-01, File 15364
16005-4
4
CPB160-4*
16200-1
1
CPB162-1*
16200-2
2
CPB162-2*
16200-3
3
CPB162-3*
16201-1
1
CPB162-1*
16201-2
2
CPB162-2*
16201-3
3
CPB162-3*
16204-1
1
CPB162-1*
16204-2
2
CPB162-2*
16204-3
3
CPD162-3*
16301-1
1
CPDB-1*
16301-2
2
CPDB-2*
16301-3
3
CPDB-3*
16303-1
1
CPDB-1*
16303-2
2
CPDB-2*
16303-3
3
CPDB-3*
16306-1
1
CPDB-1*
16306-2
2
CPDB-2*
16306-3
3
CPDB-3*
16500-1
1
CPDB165**
16500-2
2
CPDB165**
The prefix “16204” defines the block’s lineside and loadside
characteristics (i.e., conductor port per pole that accepts 2/0 - #14
Cu, or 2/0 - #12 Al conductors)
16500-3
3
CPDB165**
16504-1
1
CPDB165**
16504-2
2
CPDB165**
•
The suffix “3” in this example defines this as a three-pole block
16504-3
3
CPDB165**
•
See the catalog number tables for details on the available lineside/
loadside characteristics
Flammability rating
•
UL 94 V0
Optional covers
•
See table for catalog numbers specific to each block
How to order
From the catalog number tables, select the catalog number
that defines the desired lineside/loadside port and conductor
characteristics.
Add to the catalog number the suffix that defines the desired pole
configuration. Note, you must select from the available number of
poles for each catalog number. These appear in the second column
of the catalog number tables.
Catalog number example — 16204-3 is a 3-pole 16204
Where:
•
Power distribution
and terminal blocks
* Maximum SCCR contingent upon the application of an upstream current-limiting
overcurrent protective device. See table for fusing requirements.
* Cover catalog number provides one individual cover for each block.
** Order one cover for each pole.
Data sheet no. 10534
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
9-15
9 — Power distribution and terminal blocks
Lineside
No. Current
of
rating
poles
(A)
Line/load port
configuration
1, 2, 3
115
1, 2, 3
150
2, 3, 4
1, 2, 3
175
175
Loadside
Wire size
(Str/ferrule unless
noted)*
2 - 3 Cu/Al (Str)
4 - 6 Cu/Al (Str)
8 Cu/Al (Str)
10 - 14 Cu (Str)
1/0 - 3 Cu (Str)
4 - 6 Cu (Str)
8 Cu (Str)
10 - 14 Cu (Str)
2/0 - 1 Cu/Al (Str)
2 - 8 Cu/Al
10 - 12 Al (Str)
10 - 14 Cu
4 - 8 Cu/Al
10 - 14 Cu
2/0 - 1 Cu/Al (Str)
2 - 8 Cu/Al
10 - 12 Al (Str)
10 - 14 Cu
4 - 8 Cu/Al
10 - 14 Cu
Wires
per
port
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
2
2
Torque
N•m
(lb-in)
5.6 (50)
5.1 (45)
4.5 (40)
4.0 (35)
5.6 (50)
5.1 (45)
4.5 (40)
4.0 (35)
Ports/
Pole
1
1
12.4 (110)
4.0 (35)
1
13.6 (120)
12.4 (110)
4.0 (35)
1
13.6 (120)
Wire size
(Str/ferrule unless
noted)*
2 - 3 Cu/Al (Str)
4 - 6 Cu/Al (Str)
8 Cu/Al (Str)
10 - 14 Cu (Str)
1/0 - 3 Cu (Str)
4 - 6 Cu (Str)
8 Cu (Str)
10 - 14 Cu (Str)
2/0 - 1 Cu/Al (Str)
2 - 8 Cu/Al
10 - 12 Al (Str)
10 - 14 Cu
4 - 8 Cu/Al
10 - 14 Cu
2/0 - 1 Cu/Al (Str)
2 - 8 Cu/Al
10 - 12 Al (Str)
10 - 14 Cu
4 - 8 Cu/Al
10 - 14 Cu
Wires
per
port
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
2
2
Torque
N•m
(lb-in)
5.6 (50)
5.1 (45)
4.5 (40)
4.0 (35)
5.6 (50)
5.1 (45)
4.5 (40)
4.0 (35)
Ports/ SCCR
(kA)
pole
Catalog
no.
1
10
16200-_**
1
10
16201-_
1
10
16000-_**
1
200†
12.4 (110)
4.0 (35)
13.6 (120)
12.4 (110)
4.0 (35)
16204-_
13.6 (120)
2, 3, 4
255
250kcmil - 6 Cu
1
42.4 (375)
1
250kcmil - 6 Cu
1
42.4 (375)
1
10
16003-_**
1, 2, 3
255
250kcmil - 6 Cu
1
42.4 (375)
1
250kcmil - 6 Cu
1
42.4 (375)
1
10
16301-_
350kcmil - 2/0 Cu/Al (Str)
1/0 Cu/Al (Str)
1
1-2
350kcmil - 2/0 Cu/Al (Str)
1/0 Cu/Al (Str)
1
1-2
10
16005-_**
1-2
1 - 6 Cu/Al
1-2
31.1
(275)††
1
1 - 6 Cu/Al
350kcmil - 2/0 Cu/Al (Str)
1/0 Cu/Al (Str)
1
1-2
350kcmil - 2/0 Cu/Al (Str)
1/0 Cu/Al (Str)
1
1-2
10
16303-_
1-2
1 - 6 Cu/Al
1-2
31.1
(275)††
1
1 - 6 Cu/Al
500kcmil - 4/0 Cu/Al (Str)
3/0 - 1/0 Cu/Al (Str)
1
1-2
500kcmil - 4/0 Cu/Al (Str)
3/0 - 1/0 Cu/Al (Str)
1
1-2
56.5 (500)
1
10
16306-_
1 - 6 Cu/Al
1-2
1 - 6 Cu/Al
1-2
350kcmil - 2/0 Cu/Al (Str)
1/0 Cu/Al (Str)
1 - 4 Cu/Al
6 Cu/Al
500kcmil - 4/0 Cu/Al (Str)
3/0 - 1/0 Cu/Al (Str)
1
1-2
1-2
2
1
1-2
350kcmil - 2/0 Cu/Al (Str)
1/0 Cu/Al (Str)
1 - 4 Cu/Al
6 Cu/Al
500kcmil - 4/0 Cu/Al (Str)
3/0 - 1/0 Cu/Al (Str)
1
1-2
1-2
2
1
1-2
31.1
(275)††
2
10
16500-_
56.5 (500)
2
10
16504-_
1 - 6 Cu/Al
1-2
1 - 6 Cu/Al
1-2
2, 3, 4
1, 2, 3
1, 2, 3
310
310
380
1, 2, 3
620
1, 2, 3
760
31.1
(275)††
1
31.1
(275)††
1
56.5 (500)
1
31.1
(275)††
2
56.5 (500)
2
* 75°C wire (higher temperature rated wire acceptable with appropriate derating). Using a ferrule on a stranded conductor requires a correctly sized UL Listed ferrule (customer supplied) applied according to the manufacturer’s specifications. Ferrule ratings apply to copper wire only.
** Not covered by CSA certification.
† See table below for the tested upstream overcurrent protective devices necessary for achieving this SCCR.
†† Torque rating for dual wire and ferrule application is 30.5 N•m (270 lb-in).
Short-Circuit Current Rating (SCCR) data for block 16204-_
Conductors (AWG)
Catalog no.
No. of
poles
Lineside
16204-_
1, 2, 3
2/0 - 8
Fuse class/Bussmann series symbol/amp rating
Loadside
Class J
LPJ
Class RK1
LPN-RK (250 V)
LPS-RK (600 V)
Class RK5
FRN-R (250 V)
FRS-R (600 V)
Class T
JJN (300 V)
JJS (600 V)
SCCR (kA)
Min. enclosure size
2/0 - 8
200
200
60
200
200
16 x 16 x 6.75
Data sheet no. 10534
9-16
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Power distribution and terminal blocks — 9
11675 250 V screw/quick connect
power terminal block
11725 600 V screw/quick connect
power terminal block
Lineside screw connection,
loadside 0.250" quick-connect
(3 per pole) power terminal block
available from 2 to 6 poles (see
catalog number table).
Lineside screw connection,
loadside 0.250" quick-connect
(4 per pole) power terminal block
available in 2, 3 or 4 poles (see
catalog number table).
Ratings
Ratings
Volts 250 Vac/dc
•
•
Amps Up to 40 A
•
•
SCCR 10 kA per UL 508A, Table SB4.1
•
•
Agency Information
Agency information
•
UL Recognized, Guide XCFR2, File E62622, CSA 47235, CE
•
•
8-14 AWG Cu.
•
9 lb-in (1.0 N•m) max.
•
•
Catalog no. (poles)
11675-2
UL Recognized, Guide XCFR2, File E62622, CSA 47235, CE
Conductors/torque ratings
Conductors/torque ratings
•
Volts 600 Vac/dc
Amps up to 70 A
SCCR 10 kA per UL 508A Table SB4.1
2 – 14 AWG Cu
8 AWG Al.
45 lb-in (5.1 N•m) max.
Catalog no. (poles)
11675-3
11675-4
11675-6
11725-2
11725-3
11725-4
14002 600 V barrier terminal block
14004 600 V dead front terminal block
Barrier terminal block available
from 2 to 6 poles with box lug
terminals. 2- and 3-pole versions
available with loadside 0.25" quickconnect terminals (4 per pole).
See catalog numbers table.
Dead front terminal block
available from 2 to 12 poles
(see catalog number table).
Ratings
•
Ratings
•
•
•
•
•
Volts 600 Vac/dc
Amps 115 A
SCCR 10 kA per UL 508A Table SB4.1
Agency information
•
Agency information
•
UL Recognized, Guide XCFR2, File E62622, CSA 47235, CE
Conductors/torque ratings*
•
•
Volts 600 Vac/dc
Amps 90 A
SCCR 10 kA per UL 508A Table SB4.1
Conductors
•
•
Wire; 2 – 14 AWG Cu, 8 AWG Al.
Torque; 2-3 AWG 50 (5.6 N•m), 4-6 AWG 45 (5.1 N•m),
8 AWG 40 (4.5 N•m), 10-14 AWG 35 (3.9 N•m)
UL Recognized, Guide XCFR2, File E62600, CSA 47235, CE
4 – 14 AWG Cu
8 AWG Al
Marking
•
Numeral marking molded into the top of the block is standard
* Consult factory for torque ratings on "Q" quick-connect terminal option.
Catalog no. (poles)
•
Marking strip optional on 2- and 3-pole configurations. See catalog
numbers table.
14004-2
14004-5
14004-8
14004-3
14004-6
14004-9
14004-4
14004-7
14004-10
14004-12
Power distribution
and terminal blocks
Marking
Catalog no. (poles)
Standard
Loadside quickconnect terminals
Standard with
marking strip
14002-2
14002-5
Q14002-2
14002-2A
14002-3
14002-6
Q14002-3
14002-3A
14002-4
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
9-17
BUSSMANN
SERIES
Calculate
available fault
current anytime,
anywhere
Eaton’s Bussmann™ series FC2 Available Fault Current Calculator is a
simple-to-use mobile and web-based application that calculates single- and
three-phase system fault current levels.
The free tool is available for all Apple® iPhones, iPads, and Android™ mobile
devices and allows you to quickly and easily determine available fault
current levels anywhere in an electrical distribution system.
What’s more, FC2 has English, Spanish and French modes to address local
language and equipment marking requirements.
Download today from the Android or Apple store or visit
Eaton.com/bussmannseries to learn more.
Follow us on social media to get the
latest product and support information.
Connector products — 10
Section
page
Description
Compact rail and panel mount blocks
Connector products to simplify
wiring
NDN DIN-Rail and C-Rail feed through blocks
2-3
N512, NFT2, NFT3, NC3, NSE3, NSS3 C-Rail feed
through blocks
4-5
15188, PLU3, PLU1, PSU1 depluggable DIN-Rail and
C-Rail blocks
6-7
KT3, KT4 multi-pole panel mount blocks
7
BNQ21, BQQ41 quick-connect panel mount blocks
8
Power feed through terminal blocks
C7021 1- to 6-pole block
9
Double row terminal blocks
TB100 2- to 36-pole blocks
10-11
TB200 and TB200HB 2- to 30-pole blocks
12-13
TB300 and TB345 2- to 24-pole blocks
14-15
Accessories for double row terninal blocks
Marking options and covers
16
Top and bottom marking strips for terminal blocks
17
Double row terminal blocks continued
TB400 2- to 12-pole blocks
18
KU 2- to 12-pole blocks
19
Mounting accessories
End brackets
DIN-Rail and C-Rail mounting rails and brackets
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
20
10-1
Connector
products
Contents
10 — Connector products
NDN DIN-Rail feed through
blocks
The NDN feed through blocks
feature a compact line of
terminal blocks suitable for
both 35mm DIN-Rail or C-Rail
applications. Products easily
snap onto the mounting rail for a
quick, simple, low-cost solution.
Available accessories include
jumpers and marking tape.
UL E62622
CSA File 15364
CSA File 47235 (NDN1, NDN111)
NDN3
NDNV4
Approval
Approval
Approval
Technical data
Technical data
Technical data
Rated voltage
600V
Rated voltage
600V
Rated voltage
Rated Current
30A
Rated Current
30A
Rated Current
Center spacing, in (mm)
Conductor cross-section,
flexible (AWG/mm2)
0.25 / 6.35
22~10 / 0.3~5.3
0.3 / 7.62
22~10 / 0.3~5.3
Conductor cross-section,
flexible (AWG/mm2)
18~6 / 0.8~13.3
4
Number of Poles
3
Number of Poles
3
Circuits per foot
38
Circuits per foot
30
Torque(N•m)
2
Torque(N•m)
2
Torque(N•m)
4
18
Torque(lb-in)
18
Torque(lb-in)
#6-32
25.4 x 34 x 42.4
Colors
Block
Cat. no.
White (standard)
NDNV4-WH
Black
NDNV4-BK
Accessories
Cat. no.
4 circuits
JN4
Marking tape
35mm DIN-Rail
C-Rail
#6-32
WxHxD(mm)
23.9 x 33.3 x 42.4
Colors
Cat. no.
White (standard)
NDN3-WH
Blue
NDN3-BL
Accessories
Cat. no.
2 circuits
JNDN3
35
Screw
#10-32
WxHxD(mm)
29.7 x 36.8 x 42.4
Colors
Cat. no.
White (standard)
NDN63-WH
Black
NDN63-BK
Accessories
Cat. no.
2 circuits
JN1
MTC6
MT12-1-2
MT12-1-2
DRL35MML
DRL35MMHI
NFTA
NRA
DRL35MML
DRL35MMHI
NFTA
NRA
—
—
Screw
DRL35MML
DRL35MMHI
NFTA
NRA
35mm DIN-Rail
C-Rail
—
—
Dimensions — in (mm)
35mm DIN-Rail
C-Rail
—
—
Dimensions — in (mm)
1.0
(25.4)
Dimensions — in (mm)
Marking
tape
1.67
1.47
1.23
(42.41) (37.33) (31.24)
1.50
(38.10)
1.47
(37.33)
1.67
(42.41)
1.67
(42.41)
1.34
(34.04)
10-2
0.375 / 9.52
48
WxHxD(mm)
Modular option
Conductor cross-section,
flexible (AWG/mm2)
65A
Center spacing, in (mm)
Circuits per foot
Screw
Mounting
Center spacing, in (mm)
600V
Number of Poles
Torque(lb-in)
Jumper
NDN63
0.94
(23.87)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
1.31
(33.27)
1.17
(29.71)
Eaton.com/bussmannseries
1.45
(36.83)
Connector
products
Connector products — 10
NDN1
NDN111
Approval
Approval
Technical data
Technical data
Rated voltage
600V
Rated voltage
600V
Rated Current
90A
Rated Current
90A
Center spacing in (mm)
Conductor cross-section,
flexible (AWG/mm2)
0.635 / 16.31
18~2 / 0.8~33.6
Center spacing in (mm)
Conductor cross-section,
flexible (AWG/mm2)
0.635 / 16.31
18~2 / 0.8~33.6
Number of Poles
1
Number of Poles
3
Circuits per foot
18
Circuits per foot
18
Torque(N•m)
3.6
Torque(N•m)
3.6
32
Torque(lb-in)
Torque(lb-in)
Screw
1/4-28
WxHxD(mm)
15 x 30.3 x 43.5
Colors
Cat. no.
NDN1-WH
White (standard)
Accessories
Cat. no.
—
—
35mm DIN-Rail
C-Rail
32
Screw
1/4-28
WxHxD(mm)
47.5 x 36.6 x 43.5
Colors
Cat. no.
White (standard)
NDN111-WH
Black
NDN111-BK
Accessories
Cat. no.
2 circuits
JN1
MT12-1-2
MT12-1-2
DRL35MML
DRL35MMHI
NFTA
NRA
DRL35MML
DRL35MMHI
NFTA
NRA
35mm DIN-Rail
C-Rail
NDN111A-WH, NDN111A-BK
Dimensions — in (mm)
Dimensions — in (mm)
Mtg. holes
0.18 (4.57) dia.
0.28 (7.11) c'bores
1.46
(37.13)
1.71
(43.48)
1.32
(33.68)
1.71
(43.48)
Dovetail option
0.62
(15.75)
1.87
(47.50)
Dovetail
Option
0.59
(14.99)
1.43
(36.31)
1.44
(36.57)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
10-3
10 — Connector products
C-Rail feed through terminal
blocks
12-pole
C-Rail terminal blocks provide
a low-profile, compact footprint solution for various
wire connection applications.
Products feature an easy,
snap-on installation method and
an array of accessories including
jumpers and marking strips.
UL E62622 (excluding N512)
CSA File 15364
CSA File 47235 (NFT3)
N512
Approval
Approval
Approval
Technical data
Technical data
Technical data
Rated voltage
300V
600V
Rated voltage
600V
Rated voltage
600V
Rated current
20A
5A
Rated Current
40A
Rated Current
40A
Center spacing in (mm)
Conductor cross-section,
flexible (AWG/mm2)
0.197 / 5.0
22~12 / 0.3~3.3
0.28 / 7.13
Conductor cross-section,
flexible (AWG/mm2)
22~8 / 0.3~8.4
Center spacing in (mm)
Conductor cross-section,
flexible (AWG/mm2)
0.39 / 9.91
22~8 / 0.3~8.4
12
Number of Poles
2
Number of Poles
3
Circuits per foot
60
Circuits per foot
38
Circuits per foot
28
Torque(N•m)
1.4
Torque(N•m)
2
Torque(N•m)
2
12
Torque(lb-in)
18
Torque(lb-in)
Screw
#4-48
WxHxD(mm)
61.0 x 27.7 x 22.4
Colors
Cat. no.
Black (standard)
Block
Screw
—
Accessories
12 circuits
16.5 x 34.7 x 42.8
Colors
Cat. no.
JN512
NFT2-WH
White (standard)
—
Cat. no.
Marking tape
#8-32
WxHxD(mm)
N512-BK
—
Mounting
Center spacing in (mm)
Number of Poles
Torque(lb-in)
Jumper
NFT3
NFT2
Cat. no.
2 circuits
JN2
AT512
NFTA
NRA
C-Rail
Dimensions — in (mm)
WxHxD(mm)
Colors
NFTA
NRA
30.0 x 32.9 x 31.4
Cat. no.
White (standard)
NFT3-WH
NFT3-BK
Accessories
2 circuits
Cat. no.
JN3
MT12-1-2
MT12-1-2
C-Rail
18
#8-32
Black
—
Accessories
Screw
NFTA
NRA
C-Rail
Dimensions — in (mm)
Dimensions — in (mm)
2.40
(60.96)
0.60
(15.44)
0.07
(1.78)
1.68
(42.82)
1.09
(27.68)
10-4
1.29
(32.94)
0.93
(23.80)
0.88
(22.35)
1.18
(29.97)
0.36
(9.14)
1.23
(31.34)
1.23
(31.37)
0.65
(16.51)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
1.29
(32.94)
Connector products — 10
Connector
products
3-pole
NC3
NSE3
NSS3
Approval
Approval
Approval
Technical data
Technical data
Technical data
Rated voltage
600V
Rated voltage
600V
Rated voltage
600V
Rated Current
175A
Rated Current
115A
Rated Current
30A
Center spacing in (mm)
1.06 / 26.92
Conductor cross-section,
flexible (AWG/mm2)
14~2/0 /2.1~67.4
Cu/AL
Center spacing in (mm)
Conductor cross-section,
flexible (AWG/mm2)
1.06 / 26.92
Ring terminals
only
Center spacing in (mm)
Conductor cross-section,
flexible (AWG/mm2)
0.385 / 9.77
Ring terminals
only
Number of Poles
3
Number of Poles
3
Number of Poles
3
Circuits per foot
11
Circuits per foot
11
Circuits per foot
28
Torque(N•m)
5.1
Torque(N•m)
3.6
Torque(N•m)
1.4
Torque(lb-in)
45
Torque(lb-in)
32
Torque(lb-in)
12
Screw
5/16 - 24
WxHxD(mm)
79.4 x 44.5 x 44.5
Colors
Cat. no.
Screw
—
—
Accessories
Cat. no.
—
—
Accessories
2 circuits
—
NFTA
NRA
Dimensions — in (mm)
#6-32
WxHxD(mm)
31.5 x 33.7 x 31.8
Colors
Cat. no.
JNSE3
—
Accessories
Cat. no.
2 circuits
JNSS3
MT12-1-2
—
NFTA Series
NRA Series
Panel mount
C-Rail
Dimensions — in (mm)
NSS3-WH
White (standard)
—
Cat. no.
MT12-1-2
Panel mount
C-Rail
Screw
NSE3-WH
White (standard)
—
Cat. no.
—
79.2 x 38.9 x 445
Colors
NC3-WH
White (standard)
1/4 - 28
WxHxD(mm)
MT12-1-2
—
NFTA
NRA
Panel mount
C-Rail
Dimensions — in (mm)
1.25
(31.75)
3.12
(79.38)
1.75
(44.45)
0.250 x 0.190
mtg. slots
1.24
(31.50)
1.75
(44.45)
1.75
(44.45)
1.25
(31.75)
1.25
(31.75)
1.32
(33.73)
1.53
(38.86)
0.250 x 0.190"
mtg. slots
3.12
(79.24)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
10-5
10 — Connector products
DIN-Rail depluggable blocks
Depluggable terminal blocks
are available for both 35mm
DIN-Rail and C-Rail applications.
These blocks provide a simple
depluggable* option for panel
wiring applications with the
convenience of quick, easy,
snap-on installation. Product
accessories such as jumpers and
marking tape are available for
most products.
UL E62622
PLU3
15188
CSA File 15364
PLU1
CSA File 47235 (15188 Series)
Approval
Approval
Approval
* Not for use as a load break
disconnect.
Technical data
Technical data
Technical data
Rated voltage
Rated Current
Center spacing in (mm)
600V
30A
Rated Current
70A
Center spacing in (mm)
Conductor cross-section,
flexible (AWG/mm2)
0.39 / 9.91
22~8 / 0.3~8.4
Center spacing in (mm)
Conductor cross-section,
flexible (AWG/mm2)
0.3 / 7.62
18~4 / 0.8~21.2
Number of Poles
3
Number of Poles
1-3
Circuits per foot
32
Circuits per foot
28
Circuits per foot
19
Torque(N•m)
1.4
Torque(N•m)
2
Torque(N•m)
3.6
Torque(lb-in)
12
Torque(lb-in)
18
Torque(lb-in)
Screw
#6-32
Screw
#8-32
3-Pole
4-Pole
WxHxD(mm)
30.2 x 49.3 x 47.8
39.2 x 49.3 x 47.8
3-Pole
WxHxD(mm)
31.8 x 47.0 x 45.6
Colors
Cat. no.
Colors
Cat. no.
32
Screw
1/4 - 28
1-Pole
2-Pole
3-Pole
WxHxD(mm)
18.5 x 47.0 x 45.6
34.0 x 47.0 x 45.6
49.5 x 47.0 x 45.6
Colors
Cat. no.
White (standard)
15188-3
White (standard)
PLU3-WH
White (1-Pole)
White (standard)
15188-4
Black
PLU3-BK
White (2-Pole)
PLU11-WH
White (3-Pole)
PLU111-WH
Accessories
Configurable Option
Rated voltage
40A
3 or 4
Block
Mounting
600V
Rated Current
16~12 / 1.3~3.3
Number of Poles
Marking tape
Rated voltage
0.375 / 9.52
Conductor cross-section,
flexible (AWG/mm2)
Jumper
600V
Accessories
Cat. no.
2 circuits
15188J-2-J, J15188
—
Cat. no.
2 circuits
JN3
DRL35MMLO
DRL35MMHI
Reverse Wiring
Locking
Reverse; Locking
Accessories
Cat. no.
2 circuits
JN1
MT12-1-2
—
35mm DIN-Rail
PLU1-WH
15188-_R
15188-_S
15188-_RS
NFTA
NRA
C-Rail (AL)
—
MT12-1-2
NFTA
NRA
C-Rail (AL)
—
—
—
Options offered for both pole lengths
Dimensions — in (mm)
Dimensions — in (mm)
Dimensions — in (mm)
3 Pole = 1.19 (30.22)
4 Pole = 1.56 (39.62)
1.87
(47.49)
1.25
(31.75)
1.94
(49.27)
0.59
(14.98)
1.85
(46.99)
1.48
(37.59)
1.79
(45.64)
IN-LINE WIRING DIRECTION
1.25
(31.75)
3 Pole = 1.19 (30.22)
4 Pole = 1.56 (39.62)
0.375
(9.52)
1.25
(31.75)
1.85
(46.99)
0.22
(5.58)
1.25
(31.75)
1.94
(49.27)
REVERSE WIRING DIRECTION
10-6
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Connector products — 10
Panel mount multi-pole
blocks
Connector
products
Multi-pole panel mount terminal
blocks provide a compact,
high density circuit connection
solution without the necessity of
a mounting rail. These products
are designed to be nested
together to form one string of
circuit connections.
UL E62622
CSA 15364
PSU1
KT4
KT3
Approval
Approval
Approval
Technical data
Technical data
Technical data
Rated voltage
600V
Rated voltage
600V
Rated voltage
600V
Rated Current
45A
Rated Current
40A
Rated Current
30A
Center spacing in (mm)
Center spacing in (mm)
0.625 / 15.88
0.39 / 9.91
Center spacing in (mm)
only
1-3
Number of Poles
3
Number of Poles
4
Circuits per foot
19
Circuits per foot
28
Circuits per foot
48
Torque(N•m)
2.7
Torque(N•m)
2
Torque(N•m)
2
Torque(lb-in)
24
Torque(lb-in)
18
Torque(lb-in)
Ring terminals
Number of Poles
Screw
#10-32
3-Pole
WxHxD(mm)
50.3 x 49.1 x 62.1
Colors
Cat. no.
Screw
#8-32
WxHxD(mm)
Cat. no.
White (standard)
Accessories
PSU111-WH
White (3-Pole)
Jumper
Cat. no.
2 circuits
Accessories
Cat. no.
—
Mounting
—
MT12-1-2
—
Cat. no.
White
KT4-WH-A*
White
KT4-WH-B*
Cat. no.
4 circuits
JN4
MTC6
—
KAD
Panel mount
Dimensions — in (mm)
1.87
(47.63)
—
Dimensions — in (mm)
1.25
(31.75)
0.98
(24.99)
0.25
(6.35)
1.22
(31.04)
—
43.8 x 34.0 x 32.2
MT12-1-2
Panel mount
• Mounting foot
NFTA
NRA
C-Rail (AL)
WxHxD(mm)
Accessories
JN3
Marking tape
#6-32
Colors
KT3-WH
22~10 / 0.3~5.3
18
Screw
59.5 x 31.8 x 31.0
Colors
Block
22~8 / 0.3~8.4
Conductor cross-section,
flexible (AWG/mm2)
0.25 / 6.35
Conductor cross-section,
flexible (AWG/mm2)
Conductor cross-section,
flexible (AWG/mm2)
0.62
(15.88)
0.37
(9.40)
1.26
(32.23)
#8 screw clearance
KAD
end mtg.
adapter
Dimensions — in (mm)
1.93
(49.12)
1.48
(37.64)
0.625
(15.88)
2.34
(59.51)
1.34
(34.04)
1.25
(31.75)
* The KT4 products are designed to be
nested together to form one string
of circuit connectors. When used in
series, order catalog numbers KT4WH-A and KT4-WH-B.
2.44
(62.10)
0.43
(11.10)
1.25
(31.75)
1.30
(33.00)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
10-7
10 — Connector products
Panel mount quick-connect
blocks
A time saving alternative
for electrical connections,
the Bussmann series quickconnect terminal blocks offer
a convenient solution. With
male spade terminals, wire
connections are made quickly
and simply with these terminal
blocks.
UL E62622
CSA 15364
BNQ21
BQQ41
Approval
Approval
Technical data
Technical data
Rated voltage
600V
Rated voltage
600V
Rated Current
40A
Rated Current
30A
Center spacing in (mm)
0.437 / 11.1
Conductor cross-section,
flexible (AWG/mm2)
22~8 / 0.3~8.4
0.437 / 11.1
Conductor cross-section,
flexible (AWG/mm2)
0.25" Quick-connect
terminals only
Number of Poles
1
Number of Poles
1
Circuits per foot
24
Circuits per foot
24
Torque(N•m)
2
Torque(N•m)
NA
Torque(lb-in)
18
Torque(lb-in)
NA
Screw
#8-32
WxHxD(mm)
Screw
33.3 x 35.8 x 37.3
Colors
Block
Cat. no.
Cat. no.
—
—
BQE
—
Panel mount
• Mounting foot
Dimensions — in (mm)
#BQE
(end mtg. adaptor)
Cat. no.
BQQ41-WH
White (standard)
Accessories
—
Panel mount
• Mounting foot
33.3 x 35.8 x 37.3
Colors
Cat. no.
—
NA
WxHxD(mm)
BNQ21-WH
White (standard)
Accessories
Mounting
Center spacing in (mm)
—
BQE
Dimensions — in (mm)
#8 mtg.
screw
#BQE
(end mtg. adaptor)
#8 mtg.
screw
0.56
(14.28)
0.56
(14.28)
1.47
(37.33)
B
A
10-8
1.47
(37.33)
1.41
(35.81)
B
A
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
1.41
(35.81)
Eaton.com/bussmannseries
Connector products — 10
C7021 power feed through terminal blocks
Dimensions — mm (in)
C
9.6
28.0 (0.38)
(1.10)
15.8
(0.62)
With
mounting ends
5.4
(0.21)
15.8
(0.62)
55.7
(2.19)
12.5
(0.49)
Ø 9.0 TYP
(0.35)
7.9
(0.31)
1/4-20 UNC-2A
Thread TYP
A
Ratings
Ø12.2 TYP
(0.48)
B
17.5 TYP
(0.69)
•
Volts 300 V
•
Amps 115/175 A* per pole
* 175 achieved using both studs in parallel, 115 A using a single stud per line.
Without
mounting ends
15.0 TYP
(0.59)
24.0
(0.94)
12.7
(0.50)
Agency information
33.0
(1.30)
•
cURus, Guides XCFR2, XCFR8, File E62622
•
CE
A
Panel cutouts
Poles: 1- to 6
•
Wire range: AWG #3/0-8
•
Center spacing: 0.69" (18mm)
•
Bolt hole spacing: 0.625" or 5/8" (16mm)
•
Stud: Standard 1/4-20 stud (tin-plated brass) or optional M6 stud.
•
Mounting: #6 thread cutting screws (not included) or optional
mounting ends.
•
Torque: 36 lb-in.
•
Operating temperature: 130°C (266°F) max.
Typical applications
•
Applications requiring up to 175 A utilizing a 2-hole compression
lug on 5/8" centers
•
Input/output block for telecommunications power panels
•
To eliminate busbars
14.5 TYP
(0.57)
E
14.2
( ø.56)
1.6
(R.06)
30.0
(1.18)
Specifications
•
Blind Hole for #6
Thread Cutting
Screw
14.5 TYP
(0.57)
Catalog no.
A
B
C
D
E
C7021-01-X with mounting ends
C7021-02-X
17.5 (0.69)
—
54.4 (2.14)
67.3 (2.65)
31.8 (1.25)
C7021-03-X
34.9 (1.37)
—
70.9 (2.83) 84.8 (3.34) 49.2 (1.94)
C7021-04-X
52.3 (2.06)
—
89.3 (3.52) 102.2 (4.02) 66.7 (2.63)
C7021-05-X
69.8 (2.75)
—
106.8 (4.20) 119.7 (4.71) 84.2 (3.31)
C7021-06-X
87.2 (3.44)
—
124.2 (4.89) 134.1 (5.40) 101.7 (4.00)
C7021-01N-X without mounting ends
C7021-02N-X 17.5 (0.69) 36.1 (1.42)
—
—
31.8 (1.25)
C7021-03N-X 34.9 (0.69) 53.5 (2.11)
—
—
49.2 (1.94)
C7021-04N-X 52.3 (2.06) 71.0 (2.80)
—
—
66.7 (2.63)
C7021-05N-X 69.8 (2.75) 88.4 (3.48)
—
—
84.2 (3.31)
C7021-06N-X 87.2 (3.44) 105.9 (4.17)
—
—
101.7 (4.00)
Catalog number build-a-code
Symbol
Poles
Mount ends
Studs
01 = 1-pole (2 studs)
Blank = Mount ends
Blank = Standard
Blank = No hardware
02 = 2-pole (4 studs)
N = No mount ends
M6 = M6 studs
0 = Bulk pack, one set
C7021
Hardware
—
03 = 3-pole (6 studs)
1 = Bulk pack, two sets
04 = 4-pole (8 studs)
2 = Assembled, bottom
05 = 5-pole (10 studs)
3 = Assembled, top
06 = 6-pole (12 studs)
4 = Assembled, both sets
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
10-9
Connector
products
D
Power feed through
terminal block with two
rows 1/4-20 studs capable
of accommodating the
industry standard two-hole
compression lugs on both
studs in parallel.
10 — Connector products
TB100 double row terminal blocks
Dimensions — in
A
Ratings*
0.14
(3.5)
•
300 V
•
30 A
•
Breakdown voltage: 3600 V
TB100-08
UL File E62622/CSA File 47235; IEC Compliance
0.375
(9.5)
0.17 dia.
(4.3)
TB100-04SP
Agency information
0.88
(22.3)
0.31 (7.9)
* Maximum rating shown; some
options may be rated lower.
•
0.14
(3.5)
B
0.30
(7.6)
0.41
(10.4)
0.25 (6.3)
Specifications
Poles: 2 to 36
Poles
A
B
A
B
A
B
•
Center spacing: 0.375" or 3/8" (10mm)
02
1.40
1.12
14
5.90
5.62
26
10.40
10.12
•
Wire range: 14-22 AWG Cu
03
1.78
1.50
15
6.28
6.00
27
10.78
10.50
•
Screw size: #6-32 phil-slot screws
04
2.16
1.88
16
6.66
6.38
28
11.16
10.88
05
2.53
2.25
17
7.03
6.75
29
11.53
11.25
06
2.90
2.62
18
7.40
7.12
30
11.90
11.62
07
3.28
3.00
19
7.78
7.50
31
12.28
12.00
08
3.66
3.38
20
8.16
7.88
32
12.66
12.38
09
4.03
3.75
21
8.53
8.25
33
13.03
12.75
10
4.40
4.12
22
8.90
8.62
34
13.40
13.12
11
4.78
4.50
23
9.28
9.00
35
13.78
13.50
12
5.16
4.88
24
9.66
9.38
36
14.16
13.88
13
5.53
5.25
25
10.03
9.75
•
•
Torque rating: 9 lb-in
•
Distance between barriers: 0.30" (8mm)
•
Mounting: #6 screws
•
Operating temperature: -40°C to 130°C (-40°F to 266°F)
Materials
•
Molded black thermoplastic base, UL rated 94V0
•
Tin-plated brass terminals
•
Zinc-plated steel screws
Poles
Poles
1" = 25.4mm.
Catalog number build-a-code
Symbol
TB100
Poles
Screw options
Marking/cover
Hardware options
—
02 to 36
Blank = steel phil-slot, zinc-plated
L1 to L6
QC1 to QC20 = Quick-connects
00 = screws shipped bulk
Marking options, see page 10-16
Custom options†
B = brass phil-slot, nickel-plated
Special markings†, see page 10-16
J101 = flat slip-on jumper (2 position only)
SP = steel SEMS phil-slot, zinc-plated
0J2 = over barrier jumpers
0J4 = over barrier jumpers
† Contact factory for configuration.
Accessories
•
Marker strips, see page 10-17
•
Covers, see page 10-16
10-10
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Connector products — 10
B
SP
Brass phil-slot, nickel-plated
F502-J (bulk)
Steel SEMS phil-slot, zinc-plated
B001-7021-J (bulk)
Connector
products
Screw options
Hardware options
Quick-connects — assembled: 0.187" x 0.020" terminals, 13 amps maximum. For other orientations, contact factory.
QC1
QC2
QC3
QC4
QC5
QC6
QC7
QC8
QC9
QC10
QC11
QC12
QC13
QC14
QC15
QC16
QC17
QC18
QC19
QC20
Quick-connects — bulk: minimum order 100 pieces per catalog number.
QC101-J
QC102-J
QC103-J
QC104-J
QC105-J
Flat — none
QC 45° — none
QC 90° — none
Flat — Flat
Flat — QC 45°
QC106-J
QC107-J
QC108-J
QC109-J
Flat — QC 90°
QC 45° — QC 45°
QC 45° — QC 90°
QC 90° — QC90°
Jumpers — bulk: minimum order 100 pieces per catalog number. Contact factory for jumper assembly.
J101
Flat slip-on (bulk: J101-J)
OJ2
OJ4
Slip-on over barrier (bulk: OJ2-J)
Closed over barrier (bulk: OJ4-J)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
10-11
10 — Connector products
TB200 and TB200HB double row terminal blocks
Dimensions — in
A
Ratings*
•
0.16
(4.0)
Volts
TB200-10SP
•
300 V (TB200)
•
600 V (TB200HB)
•
Amps 30 A
•
Breakdown voltage 4800 V
TB200
0.437
(11.1)
0.353
(8.9)
0.56
(14.2)
0.31 (7.8)
TB200HB-06
A
Agency information
•
1.12
(28.4)
0.44 (11.2)
0.17 dia.
(4.3)
* Maximum rating shown; some
options may be rated lower.
0.16
(4.0)
B
0.16
(4.0)
UL File E62622, CSA File 47235 and 15364; IEC Compliance
0.16
(4.0)
B
0.90
1.37
(22.8) (34.8)
0.44 (11.2)
Specifications
TB200HB
•
Poles: 2 to 30
•
Wire range: 12 - 22 AWG Cu
•
Center spacing: 0.437" or 7/16" (11mm)
•
Distance between barriers: 0.353" (9mm)
•
Screw size: #6-32 phil-slot screws
•
Torque rating: 9 lb-in
•
Mounting: #6 screws
•
Operating temperature: -40°C to 130°C (-40°F to 266°F)
0.437
(11.1)
0.17 dia.
(4.3)
•
Molded black thermoplastic base UL rated 94V0
•
Terminal plating: Tin-plated brass terminals
•
Zinc-plated steel screws
0.17 x 0.22 slots
(4.3 x 5.6)
0.75
(19.0)
0.33 (8.4)
Poles
Materials
0.353
(8.9)
A
B
A
B
A
B
02
1.63
1.31
Poles
12
6.00
5.68
22
Poles
10.37
10.06
03
2.07
1.75
13
6.44
6.12
23
10.81
10.50
04
2.51
2.18
14
6.87
6.56
24
11.25
10.93
05
2.94
2.62
15
7.31
7.00
25
11.68
11.37
06
3.38
3.06
16
7.75
7.43
26
12.12
11.81
07
3.82
3.50
17
8.19
7.87
27
12.56
12.25
08
4.25
3.93
18
8.62
8.31
28
13.00
12.68
09
4.69
4.37
19
9.06
8.75
29
13.44
13.12
10
5.13
4.81
20
9.50
9.18
30
13.87
13.56
11
5.57
5.25
21
9.94
9.62
1" = 25.4mm.
Catalog number build-a-code
Symbol
Barrier
style
TB
Poles
Screw options
Marking/cover
Hardware options
02 to 30
Blank = Steel phil-slot, zinc-plated
L1 to L6 = Marking options,
see page 10-16
QC1 to QC20 = Quick-connects
00 = Screws shipped bulk
Special markings†, see page
10-16
Custom options†
—
200 =
Standard
200HB =
High barrier
B = Brass phil-slot, nickel-plated
J201 = Flat slip-on jumper, 2 position
only
BS = Brass SEMS phil-slot, nickelplated
0J3 = Over barrier jumpers
P = Steel SEMS (P-style)
0J5 = Over barrier jumpers
SP = Steel SEMS phil-slot, zinc-plated
0J7 = Over barrier jumpers
SS = Stainless steel SEMS, phil-slot
ST = Stainless steel, phil-slot
† Contact factory for configuration.
Accessories
•
Marker strips, see page 10-17
•
Covers, see page 10-16
10-12
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Connector products — 10
B
BS
SP
P
ST
SS
Brass phil-slot
nickel-plated
B001-7016-J (bulk)
Brass SEMS phil-slot
nickel-plated
B001-7019-J (bulk)
Steel SEMS phil-slot
zinc-plated
B001-7007-J (bulk)
Steel SEMS
(P-style)
B001-7000-J (bulk)
Stainless steel philslot
F507-J (bulk)
Stainless steel SEMS
phil-slot
B001-7085-J (bulk)
Hardware options
Quick-connects — assembled: 0.25" x 0.031" terminals, 20 amps maximum. For other orientations, contact factory.
QC1
QC2
QC3
QC4
QC5
QC6
QC7
QC8
QC9
QC11
QC10
QC12
QC13
QC14
QC15
QC16
QC17
QC18
QC19
QC20
Quick-connects — bulk: minimum order 100 pieces per catalog number.
QC201-J
QC202-J
QC203-J
QC204-J
QC205-J
QC 45° — blank
Flat — blank
QC 90° — blank
Flat — Flat
Flat — QC 45°
QC206-J
QC207-J
QC208-J
QC209-J
Flat — QC 90°
QC 45° — QC 45°
QC 45° — QC 90°
QC 90° — QC 90°
Jumpers — bulk: minimum. order 100 pieces per catalog number. Contact factory for jumper assembly.
J201
OJ3
OJ5
OJ7
Flat slip-on
(not available on TB200HB)
J201-J (bulk)
Slip-on over barrier for TB200HB
OJ3-J (bulk)
Closed over barrier for TB200HB
OJ5-J (bulk)
Closed over barrier for TB200
OJ7-J (bulk)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
10-13
Connector
products
Screw options
10 — Connector products
TB300 and TB345 double row terminal blocks
Dimensions — in
Ratings*
•
•
•
8-32 binding head screw - TB 300
10-32 binding head screw - TB 345
Volts 600 V
A
0.22
(5.6)
TB300-08
Amps
•
30 A (TB300)
•
45 A (TB345)
TB300
and
TB345
Breakdown voltage 7500 V
TB345-06SP
* Maximum rating shown; some
options may be rated lower.
B
0.90
1.33
(22.8) (33.8)
0.50 (12.7)
0.56
(14.2)
Agency information
0.21 x 0.25 slots
(5.3 x 6.3)
0.412
(10.4)
0.56
(14.2)
0.21dia.
(5.3)
0.81
(20.5)
0.33 (8.4)
UL File E62622, CSA File 47235; IEC Compliance
Specifications
Poles
•
Poles: 2 to 24
•
Wire range: 8 - 22 AWG Cu
•
Center spacing: 0.562" or 9/16" (14mm)
•
Screw size
•
•
TB300 — #8-32 phil-slot screws
•
TB345 — #10-32 phil-slot screws
Torque rating
•
#8 screws - 16 lb-in
•
#10 screws - 20 lb-in
Distance between barriers: 0.41" (10mm)
•
Mounting
•
TB300 — #8 screws
•
TB345 — #10 screws
B
A
B
A
B
2.13
1.69
Poles
10
6.62
6.19
Poles
18
11.12
10.68
03
2.69
2.25
11
7.18
6.75
19
11.68
11.25
04
3.25
2.81
12
7.75
7.31
20
12.24
11.81
05
3.81
3.37
13
8.31
7.87
21
12.80
12.37
06
4.37
3.94
14
8.87
8.44
22
13.37
12.93
07
4.94
4.50
15
9.43
9.00
23
13.93
13.50
08
5.50
5.06
16
9.99
9.56
24
14.49
14.06
09
6.06
5.62
17
10.56
10.12
1" = 25.4mm.
•
•
A
02
Operating temperature: -40°C to 130°C (-40°F to 266°F)
Materials
•
Molded black thermoplastic base, UL rated 94V0
•
Tin-plated brass terminals
•
Zinc-plated steel screws
Catalog number build-a-code
Symbol
Screw size
TB
Poles
Screw options
Marking/cover
Hardware options
02 to 24
Blank = Steel phil-slot, zinc-plated
L1 to L6 marking options, see page
10-16
QC1 to QC20 = Quick-connects (TB300
only)
00 = Screws shipped bulk
Special markings†, see page 10-16
Custom options (TB300 only)†
—
300 = 8-32 screw
345 = 10-32 screw
B = Brass phil-slot, nickel-plated
J301 = Flat slip-on jumper
BS = Brass SEMS phil-slot, nickelplated (TB300 only)
OJ6 = Over barrier jumper
SP = Steel SEMS phil-slot, zincplated
OJ11 = Over barrier jumper
ST = Stainless steel, phil-slot
† Contact factory for configuration.
Accessories
•
Marker strips, see page 10-17
•
Covers, see page 10-16
10-14
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Connector products — 10
B
BS
Brass phil-slot nickel-plated
- B001-7018-J (TB300 bulk)
- B500-023-028-J (TB345 bulk)
SP
Brass SEMS phil-slot nickel-plated
- B001-7015-J (TB300 bulk)
ST
Steel SEMS phil-slot zinc-plated
- B001-7017-J (TB300 bulk)
- B001-5774-J (TB346 bulk)
Stainless steel phil-slot
- B001-7063-J (TB300 bulk)
- B001-7064-J (TB345 bulk)
Hardware options
Quick-connects — assembled: TB300 only; 0.25" x 0.031" terminals, 20 amps maximum. For other orientations, contact factory.
QC1
QC2
QC3
QC4
QC5
QC6
QC7
QC8
QC9
QC10
QC11
QC12
QC13
QC14
QC15
QC16
QC17
QC18
QC19
QC20
Quick-connects — bulk: *TB300 only; minimum order 100 pieces per catalog number.
QC201-J
QC202-J
QC203-J
QC204-J
QC205-J
Flat — blank
QC 45° — blank
QC 90° — blank
Flat — Flat
Flat — QC 45°
QC206-J
QC207-J
QC208-J
QC209-J
Flat — QC 90°
QC 45° — QC 45°
QC 45° — QC 90°
QC 90° — QC 90°
Jumpers — bulk: TB300 only; minimum order 100 pieces per catalog number. Contact factory for jumper assembly.
J301
OJ6
OJ11
Flat slip-on
J301-J (bulk)
Closed over barrier
OJ6-J (bulk)
Slip-on over barrier
OJ11-J (bulk)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
10-15
Connector
products
Screw options
10 — Connector products
Marking options and covers for double row terminal blocks
Special marking*
1 2 3
3 2 1
1
2
3
Standard marking
L1
L2
L3
1
2
3
1 2 3
3 2 1
L4
L5
L6
Standard markings are applied directly to the side(s) of a block. The
standard marking color is white. The standard numeral height is
0.125 inches (3mm).
Special markings are available at an additional charge. Drawing(s)
must be submitted to ensure accuracy of part required. Consult
factory for price and delivery.
* Not available on TB400 products
Note: Blocks marked on both sides require a different code for each
side. Example: Style L1 on one side of the block requires Style L2
on the other side to ensure common terminal marking. To order,
add appropriate suffix (L1, L2, L3, L4, L5 and/or L6) to block catalog
number in the proper sequence.
Covers
Catalog no.
For block family
(must be ordered separately)
DD1-J
TB100
DD2-J
TB200
DD2HB-J
TB200HB
DD3-J
TB300
Covers prevent personnel, screws and foreign items from contacting
live terminals, and are available in white (opaque) or clear plastic.
Two cover clips are supplied with each cover. The cover width is 1.31
inches (33mm). Example: 10 position cover, white, TB100 = catalog
number X12010.
Cover catalog number build-a-code†
Symbol
Cover strip†
Poles
119 = TB100 - clear
02 to 36 (TB100)
120 = TB100 - white
02 to 30 (TB200/
TB200HB)
219 = TB200/TB200HB - clear
02 to 24 (TB300/
TB345)
High barrier
option only
X
HB = High
barrier††
220 = TB200/TB200HB - white
319 = TB300/TB345 - clear
320 = TB300/TB345 - white
† Cover strip not available for TB400 products.
†† Applicable to X219 and X220 only.
Cover clips — bulk
10-16
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Connector products — 10
Bottom marker strips
(order separately from blocks)
(order separately from blocks)
Connector
products
Top marker strips
des
o si
g
Top mounting marker strips must be ordered separately and are only
available in white (opaque) plastic. Two cover clips are supplied with
each marker strip.
Example: 12 position cover, TB200, 0.032" x 0.312" = catalog number
X20312.
Example: 12 position cover, TB200HB, 0.06" x 0.50" = catalog
number X23312HB.
Top marker strip catalog number build-a-code
Series
Top marker strip†
Poles
High barrier
option only
103 = TB100
(0.032 thk x 0.312 w)
02 to 36
(TB100)
HB = High
barrier††
133 = TB100
(0.060 thk x 0.500 w)
02 to 30
(TB200/TB200HB)
203 = TB200/TB200HB
(0.032 thk x 0.312 w)
02 to 24
(TB300/TB345)
X
233 = TB200/TB200HB
(0.060 thk x 0.500 w)
303 = TB300/TB345
(0.032 thk x 0.380 w)
333 = TB300/TB345
(0.060 thk x 0.500 w)
† Marking strips not available for TB400 products
†† Applicable to X203 and X233 only.
in
ark
one
w
ng t
arki
M
e
sid
M
o
g tw
es
sid
rkin
Ma
Bottom mounting marker strips are made of 0.03" thick black PVC.
Space is available along the edge to handle most marking needs. All
marker strips must be ordered separately.
To order, specify catalog number and required marking orientation.
Example: 13 position strip, TB100 with no markings, space for
marking one side = catalog number X10513. Consult factory for
specials.
Standard numeral height is 0.125". Standard markings are 0-99.
Special markings are available on special order. Drawing(s) must be
submitted to ensure accuracy of part required.
Dimensions — in
For TB block
Dim.
TB100
TB200
TB200HB
TB300
TB345
TB400
A
1.13
1.37
1.62
1.58
1.58
N/A
B
1.38
1.62
1.81
1.81
1.81
N/A
Bottom marker strip catalog number build-a-code
Symbol
X
Bottom Marker Strip†
Poles
101 = TB100
marking both sides
105 = TB100
marking one side
201 = TB200
marking both sides
205 = TB200
marking one side
291 = TB200HB
marking both sides
295 = TB200HB
marking one side
301 = TB300 and TB345
marking both sides
305 = TB300 and TB345
marking one side
02 to 36
(TB100)
02 to 30
(TB200/TB200HB)
02 to 24
(TB300/TB345)
Marking
orientation
BF =
Bottom forward
BR =
Bottom reverse
TF =
Top forward
TR =
Top reverse
† Not available for TB400 products.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
10-17
10 — Connector products
TB400 double row terminal blocks
Dimensions — in
A
Ratings
B
•
Volts 600 V
•
Amps 75 A
•
Breakdown voltage 7500 V
0.22
(5.6)
0.15 dia.
(3.8)
TB400-05
0.625
(15.9)
1.12
(28.4)
Agency information
•
0.22 dia. (5.6)
UL File E62622, CSA File 47235; IEC Compliance
0.687
(17.4)
Specifications
0.687
(17.4)
0.562
(14.3)
1.81
(46.0)
•
Poles: 2 to 12
•
Wire range: 6-14 AWG Cu
•
Center spacing: 0.687" or 11/16" (17mm)
•
Distance between barriers: 0.56" (14mm)
•
Screw size: #10-32 phil-slot screws
•
Torque rating: 20 lb-in
•
Mounting: #10 screws
•
Operating temperature: -40°C to 130°C (-40°F to 266°F)
Materials
0.76
(19.3)
0.46 (11.7)
1.34
(34.0)
A
B
A
B
A
B
02
Poles
2.51
2.06
06
5.26
4.81
10
8.01
7.56
03
3.20
2.75
07
5.95
5.50
11
8.70
8.25
04
3.89
3.44
08
6.64
6.19
12
9.39
8.94
05
4.58
4.13
09
7.33
6.88
•
Molded black thermoplastic base, UL rated 94V0
1" = 25.4mm.
•
Tin-plated brass terminals
Screw options
•
Zinc-plated steel screws
Poles
Brass nickel-plated phil-slot
B500-023-028-J (bulk)
Poles
Stainless steel phil-slot
B001-7064-J (bulk)
Hardware options
OJ14: Closed over barrier
OJ14-J (bulk)
Catalog number build-a-code
Symbol
TB400
Poles
Screw options
—
02 to 12
Blank = Zinc-plated steel phil-slot
00 = Screws shipped bulk
B = Nickel-plated brass phil-slot
ST = Stainless steel, phil-slot
Accessories
•
OJ14 - Jumper over barrier, consult factory for pole configuration
10-18
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Connector products — 10
KU
Ratings
•
Volts 600 V
•
Amps 60 A*
KU_
* 60 A rating achieved with 6 AWG Cu
wire crimped to ring terminal.
KU_SC
Agency information
•
Poles
02
04
06
08
10
12
A
2.50
3.75
5.00
6.25
7.50
8.75
B
1.62
2.87
4.12
5.37
6.62
7.87
B
KUX 0.62
only (15.9)
A
2.00
3.25
4.50
5.75
7.00 #10 screw 0.43
clearance
(11.1)
8.25
1.50
(38.1)
2.00
(50.8)
0.50
(12.7)
1" = 25.4mm.
1.25
(31.8)
UL File E62622, CSA File 47235
A
Specifications
Accessories (order separately)
•
Poles: 2 to 12
•
Wire range: 6-22 AWG Cu
•
Center spacing: 0.625" (16mm)
•
Screw size: #10-32
•
Torque rating: 20 lb-in
•
Distance between barriers: 0.437" (11mm)
•
Mounting: Panel mount
•
Operating temperature: 105°C (221°F) max.
MTMU(poles)
Molded marking
tape, matte finish
NUM(poles)
Molded marking
tape
JU12
Jumper, 12 circuits
Materials
•
Molded black Noryl base, UL rated 94V1
•
Terminal plating: Nickel-plated brass terminals
•
Zinc-plated steel screws
NUE
End piece for NUC
NUC(poles)
Cover
Catalog number build-a-code - KU versions
Symbol / for
Poles
Screw options
Covers
Marking strip
00 = Screws shipped bulk
WC = Top cover and2 end
plates
MT = Matte finish
—
KU / Standard block
KUX / Short block
KURL / Standard w/removable link
2
4
6
8
10
12
KUXRL / Short block w/removable link
BP = Brass phil-slot, nickel-plated
NU = Numbered 1 to
12, horizontal
P = Steel screw w/pressure plate zinc-plated
NUV = Numbered 1 to
12, vertical
W = Brass washer head, nickel-plated
PT = Marker strip for
cover†
Catalog number build-a-code - KU__SC versions
Symbol / for
Poles
Screw options
Covers
Marking strip
00 = Screws shipped bulk
WC = Top cover and 2
end plates
PT = Marker strip for
cover†
—
KUSC / Standard w/shorting strap and 4
shorting screws
KUXSC / Short block w/shorting strap
and 4 shorting screws
2
4
6
8
10
12
BP = Brass phil-slot, nickel-plated
P = Steel screw w/pressure plate, zinc-plated
W = Brass washer head, nickel-plated
† Requires WC cover option
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
10-19
Connector
products
Dimensions — in
KU double row terminal blocks
10 — Connector products
End brackets
BRKT-ND
Use with
BRKT-NDSCRW
DRL35MMHI
Use with
DRL35MMLO
Dimensions — mm
DRL35MMHI
BRKT-NDSCRW2
Use with
DRL35MMLO
DRL35MMHI
BRKT-NDSCRW3
Use with
DRL35MMLO
DRL35MMHI
DRL35MMLO
Dimensions — mm
Dimensions — mm
Dimensions — mm
DRL35MMLO*
DRL35MMHI*
NFTA**
NRA**
Low profile
High profile
C-Rail
C-Rail
35mm DIN-Rail
35mm DIN-Rail
BRKT-ANGL
BRKT-FLT
Angle bracket
Flat bracket
Mounting rails and brackets
* Available in 1 meter lengths only.
** Cut-to-length. Consult your Bussmann series product representative for details.
10-20
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
TM
The Bussmann series Compact Circuit
Protector for Class CF CUBEFuseTM
delivers the smallest footprint compared
to any Class J disconnect solution —
requiring up to 51% less space.
Compact Circuit Protector disconnect switches
Compact Circuit Protector Base (CCP2B - CUBEFuse)
36-37
Class CC, UL supplemental and IEC 10x38 (CCP2)
38-42
Accessories for Class CC, UL supp. and IEC 10x38 CCP2
43-47
Multi-wire lug kits
43
Selector and pistol handles, shafts, NFPA 79 compliant
handles
44
Auxiliary contacts
45
PLC fuse monitors
46-47
How to order Class CC, UL supplemental and IEC
10x38 switches
48-51
Low profile Class CC and G, UL supplemental and
IEC 10x38 (CCPLP)
52-53
UL 98 fused disconnect switches, 30 to 800 A
Introduction and agency information
Product line summary — UL
54
55
30 A Class CC and compact Class J
56-57
30 A standard Class J
58-59
60 A compact Class J
60-61
60 A standard Class J
62-63
100 A standard Class J
64-65
200 A and 400 A standard Class J
66-68
600 A standard Class J and 800 A Class L
69-70
UL 98 non-fused disconnect switches, 30 to 1200 A
Introduction, agency information and IEC product summary
UL product summary
72
30 A, 60 A and 100 A compact
Contents
71
73-74
100 A, 200 A and 400 A standard
75-76
600 A, 800 A, 1000 A and 1200 A standard
77-78
UL 508 non-fused disconnect switches, 16 to 80 A
Section
page
Description
Class CF CUBEFuse 200 and 400 A (CCP2-CF)
Accessories for CUBEFuse CCP2
Multi-wire lug kits
2-8
9-12
1313-14
Selector and pistol handles, shafts, NFPA 79 compliant
handles
15-16
Flange handle rod and cable operators
17
200 and 400 A switch rotary mechanisms
18
Auxiliary contacts
19-20
PLC fuse monitors (up to 100 A switches)
21-22
How to order Class CF switches
UL product summary
79
80
16 A, 25 A, 40 A, 63 A and 80 A
Compact Circuit Protector disconnect switches
Class CF CUBEFuse up to 100 A (CCP2-CF)
Introduction, agency information and IEC product summary
81-83
Enclosed UL 98 and UL 508 disconnect switches
Introduction and agency information
84
Fused UL 98 enclosed disconnects, 30 to 800 A
85-86
Non-fused UL 98 enclosed disconnects, 30 to 1200 A
87-88
Non-fused UL 508 enclosed disconnects, 16 to 80 A
89-90
23-35
Switches up to 100 A
23-30
200 and 400 A switches
32-35
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-1
Disconnect
switches
The power of space
Section
page
Description
11 — Disconnect switches
Compact Circuit Protector
UL 98 Class CF disconnect switches from 30 to 400 A
Class CF CCP contents
Section page
30, 60 and 100 amp switches
Descriptions and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
Catalog numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Terminal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-8
200 and 400 A switches
Descriptions and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Catalog numbers and horsepower ratings . . . . . . . . . . . . . . . . . . . . . 10
Available lugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CCP2 switch up to 100 A
with and without rotary operation mechanisms
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
Accessories
Multi-wire lug kits
30, 60 and 100 A switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
200 and 400 A switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Handles and shafts
Selector and pistol handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Handle shafts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
NFPA 79 compliant handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Flange handle rod and cable operators . . . . . . . . . . . . . . . . . . . . . . . . 17
200 and 400 A switches
Front rotary mechanisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Side rotary mechanisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Terminal shroud kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Phase barrier kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Handle extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Auxiliary contacts
200 A CCP2 switch
with and without rotary operation mechanisms
30, 60 and 100 A switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
200 and 400 A switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PLC fuse monitor (30, 60 and 100 A switches). . . . . . . . . . . . . . . .21-22
How to order
30 and 60 A switches
Switch only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Front and right side rotary switches . . . . . . . . . . . . . . . . . . . . . .24-25
Left side rotary switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
100 A switches
Switch only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Front and right side rotary switches . . . . . . . . . . . . . . . . . . . . . .28-29
Left side rotary switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
200 and 400 A switches
200 A switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-33
400 A switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-35
400 A CCP2 switch
with and without rotary operation mechanisms
11-2
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Symbol
CCP2-(pole)-(amps)CF
Description
Switch only
CCP2R-(pole)-(amps)CF
Right front rotary, clockwise operated switch
CCP2RL-(pole)-(amps)CF Left front rotary, clockwise operated switch
CCP2S-(pole)-(amps)CF
Right side rotary, clockwise operated switch
side rotary, counterclockwise operated
CCP2SL-(pole)-(amps)CF Left
switch
Description
The revolutionary, next generation Bussmann™ series Compact
Circuit Protector (cat. no. CCP2) is a fused UL® 98 branch circuit
disconnect switch utilizing the UL Class CF time-delay or fast-acting
CUBEFuse™ with Class J electrical performance. With up to a 51
percent smaller footprint than a traditional fusible solution, these
switches provide a high 200 kA SCCR to help improve panel and
assembly SCCR.
The 35 mm DIN-Rail mount CCP2 is available in a variety of 30,
60 and 100 amp configurations to meet many application needs
including rotary operation.
The switch-only versions of the 30, 60 and 100 A disconnects are
direct, drop-in replacements for the earlier models (noted by a
catalog number starting “CCP-”). The auxiliary contacts and PLC
remote fuse indicator are backwards compatible. The multi-wire lug
kits and terminal shrouds are not.
Conductors/terminals
•
75°C Cu, see conductor tables for size, type and torque
information
•
Box lug, single/dual conductor
•
Fork terminal suitable for line, load or accessory connection, max.
30 A suitable for use with:
• 10-24 screw for 30 and 60 A switches
•
•
1/4-28 screw for 100 A switches
Multi-wire lug kits — see accessories for details
Disconnect
switches
Catalog symbols for 30, 60 and 100 A switches
Storage and operating temperature
•
-20°C to 75°C (-4°F to 167°F)*
* For fuse performance under or above 25°C, consult fuse performance derating
charts in the Bussmann Division publication no. 3002, titled Selecting Protective
Devices (SPD)
Lockout/tagout provisions
•
1/4” lock, direct use on switches without rotary mechanisms
requires a lock with a straight shank of sufficient length to engage
all poles
Minimum enclosure size per UL 98*
•
30 and 60 A switch 10”x 8”x 6”(254 x 203 x 152 mm)
•
100 A switch, 12” x 10” x 6” (305 x 254 x 152 mm)
Application flexibility is extended with an optional multi-wire lug
kit, featuring finger-safe shrouds, that provides three (30 and 60 A
switches) and six (100 A switches) additional wire ports on each pole
for power distribution applications.
* Smaller enclosures may be used at the discretion of the user, with adherence to
NEC minimum wire bend radius requirements.
Other accessories include a PLC fuse monitor for open fuse
indication and NO/NC auxiliary contacts that easily integrate into
various monitoring systems.
•
Front and side rotary operated versions are easily applied for
through-the-door or through the left or right side operation to
enhance safety.
Ratings
•
•
•
Mounting**
35 mm DIN-Rail
** Switch is panel mount with flange handle cable operator.
Local open fuse indication minimum voltage
•
90 Vac, requires an open fuse to be in the CCP2 and the switch in
the ON position
Accessories
Volts
•
Multi-wire lug kits with terminal shrouds
•
347 Vac (1-pole switches)
•
Selector and pistol handles for use with rotary operated switches
•
600 Vac (2- and 3-pole switches)
•
8 mm shafts for use with selector and pistol handles
•
125 Vdc*
•
Auxiliary contacts
Amps
•
PLC fuse monitor
•
30 A
•
NFPA 79 compliant handle
•
60 A
•
Flange handle rod and cable operators
•
100 A
SCCR
•
200 kA RMS Sym.
•
100 kA DC
Poles
•
1-, 2- and 3-poles catalog number dependent
* Switch amp rating and installed fuse amp rating dependent, see catalog number
table for details.
Agency information
•
UL 98 Listed, Guide WHTY, File E302370
•
cULus to Canadian Standard 22.2 No. 4-04, Guide WHTY7,
File E302370
•
RoHS compliant
•
CE
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-3
11 — Disconnect switches
Features
•
Uses UL Class CF time-delay or fast-acting CUBEFuse with Class
J electrical performance
•
Extremely compact design at 25.4 mm (1 inch) wide per pole
•
Amp rating rejection disconnects will not accept a CUBEFuse amp
rating greater than switch rating
•
High 200 kA short-circuit current rating
•
Disconnect rated to provide means for load isolation
•
Full voltage rated at 347 Vac (1-pole switches) and 600 Vac (2- and
3-pole switches)
•
125 Vdc* rated to meet specialized applications
•
UL 98 Listed and suitable for branch circuit disconnect and branch
circuit protection with installed fuses
•
Horsepower rated
•
Open fuse indication:
• Local open fuse indication light standard on each pole
•
Optional PLC fuse monitor for wired remote open fuse
indication by signaling a PLC and opening a contactor to
de-energize all phases, if required
•
Additional open fuse indication can be provided by the indicating
time-delay CUBEFuse (6 to 100 A)
•
Finger-safe construction with 10 AWG (6 mm2) wire or larger
•
Built-in switch interlock prohibits removing or installing the fuse
while in the ON position
•
Padlockable for lockout/tagout procedures with a 1/4” lock
•
Rotary operated versions provide for through-the-door and
through-the-side operation flexibility and enhanced safety with:
• Right or left front operation
•
Right front rotary operated CCP2 switch with PLC fuse monitor.
Right or left side operation
•
Optional selector and pistol handles, and shafts available for use
with rotary operated versions
•
Multi-wire lug kits with terminal shrouds allow for power
distribution to multiple loads. Each lug has three (30 and 60 A
switches) or six (100 A switches) ports rated for single and dual
wires (see lug kits in accessories for details).
Rotary operating versions
* Switch amp rating and installed fuse amp rating dependent, see catalog number
table for details.
Switch handle (ganged on 2- and
3-pole versions)
Open fuse
indicating light
Fuse holder
Left front
Right front
Uses clockwise handles
Uses clockwise handles
Fork terminal
1/4” Lockout/
tagout provision
11-4
Box lug terminal
Left side
Right side
Uses counterclockwise handles
Uses clockwise handles
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
30, 60 and 100 A switch catalog numbers
Max Hp rating (Vac)
Catalog no.
Poles
Description/switch operation
Volts
SCCR
120
240
480
600
CCP2-1-30CF
1
CCP2-2-30CF
2
347 Vac/125 Vdc
1-1/2
—
—
—
600 Vac/125 Vdc
—
3
—
CCP2-3-30CF
—
3
600 Vac
—
5
15
10
CCP2R-2-30CF
2
600 Vac/125 Vdc
—
3
—
—
CCP2R-3-30CF
3
600 Vac
—
5
15
10
CCP2RL-2-30CF
2
—
3
—
—
CCP2RL-3-30CF
3
CCP2S-2-30CF
2
CCP2S-3-30CF
3
CCP2SL-2-30CF
2
CCP2SL-3-30CF
3
Switch only
Right front rotary, clockwise
Left front rotary, clockwise
Right side rotary, clockwise
Left side rotary, counterclockwise
200 kA AC
600 Vac/125 Vdc
100 kA DC
600 Vac
—
5
15
10
600 Vac/125 Vdc
—
3
—
—
600 Vac
—
5
15
10
600 Vac/125 Vdc
—
3
—
—
600 Vac
—
5
15
10
347 Vac/125 Vdc*
3
—
—
—
600 Vac/125 Vdc*
—
7-1/2
—
—
60 amp switches
CCP2-1-60CF
1
CCP2-2-60CF
2
CCP2-3-60CF
3
600 Vac
—
7-1/2
20
10
CCP2R-2-60CF
2
600 Vac/125 Vdc*
—
7-1/2
—
—
CCP2R-3-60CF
3
600 Vac
—
7-1/2
20
10
CCP2RL-2-60CF
2
—
7-1/2
—
—
CCP2RL-3-60CF
3
—
7-1/2
20
10
CCP2S-2-60CF
2
600 Vac/125 Vdc*
—
7-1/2
—
—
CCP2S-3-60CF
3
600 Vac
—
7-1/2
20
10
CCP2SL-2-60CF
2
600 Vac/125 Vdc*
—
7-1/2
—
—
CCP2SL-3-60CF
3
600 Vac
—
7-1/2
20
10
347 Vac/125 Vdc**
5
—
—
—
600 Vac/125 Vdc**
—
10
—
—
Switch only
Right front rotary, clockwise
Left front rotary, clockwise
Right side rotary, clockwise
Left side rotary, counterclockwise
600 Vac/125 Vdc*
600 Vac
200 kA AC
100 kA DC
100 amp switches
CCP2-1-100CF
1
CCP2-2-100CF
2
CCP2-3-100CF
3
600 Vac
—
20
50
40
CCP2R-2-100CF
2
600 Vac/125 Vdc**
—
10
—
—
CCP2R-3-100CF
3
600 Vac
—
20
50
40
CCP2RL-2-100CF
2
—
10
—
—
CCP2RL-3-100CF
3
—
20
50
40
CCP2S-2-100CF
2
600 Vac/125 Vdc**
—
10
—
—
CCP2S-3-100CF
3
600 Vac
—
20
50
40
CCP2SL-2-100CF
2
600 Vac/125 Vdc**
—
10
—
—
CCP2SL-3-100CF
3
600 Vac
—
20
50
40
Switch only
Right front rotary, clockwise
Left front rotary, clockwise
Right side rotary, clockwise
Left side rotary, counterclockwise
600 Vac/125 Vdc**
600 Vac
200 kA AC
100 kA DC
* 125 Vdc for installed fuse amp ratings up to 40 A. 24 Vdc for installed fuse amp ratings from 45 to 60 A.
** 125 Vdc for installed fuse amp ratings up to 80 A, 24 Vdc for installed fuse amp ratings from 90 to 100 A.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-5
Disconnect
switches
30 amp switches
11 — Disconnect switches
Dimensions – mm (in)
Box lug terminal conductor data
Wire
type
AWG
range
Class
Quantity
Torque
N•m (lb-in)
Switch (shown with optional terminal shrouds)
30 and 60 A switches
4-6
8-18
6-8
75°C Cu
Stranded, Class B
to K
3.95 (35)
Single
2.26 (20)
Stranded, Class B/C
Stranded, Class K
3.39 (30)
Dual
2.26 (20)
10-18
Stranded, Class B
to K
10-18
Solid
Single/dual
4-18
Stranded, UL ferrule,
Class B/C
Single
Twin†
Stranded, UL ferrule,
Class K
Twin†
6-18
4-18
6-18
114
4.5 206
8.1
2.26 (20)
76
3.0
50
2.0
3.39 (30)
Single
25
1.0
2.82 (25)
83
3.3
75
3.0
30A Fuse
100 A switches
12-18
2.26 (20)
10
2.82 (25)
8
4-6
Stranded, Class B/C
Single
4.52 (40
Dual
5.08 (45)
12-18
75°C Cu
1-8
10-18
Stranded, UL ferrule,
Class B/C
Solid
Class K
3-10
3.95 (35)
4.52 (40)
2.26 (20)
2.82 (25)
Single/Dual
Class K, UL ferrule
6-18
2.26 (20)
75
3.0
50
2.0
25
1.0
2.26 (20)
Single
3.39 (30)
Dual
8-18
1-7
Single
Twin†
8-18
1-7
30 and 60 amp switches
2.26 (20)
6-9
10-18
60A Fuse
6.21 (55)
4-12
89
3.5
5.08 (45)
1-3
10
75
3.0
5.08 (45)
148
5.8 240
9.5
2.26 (20)
Single
3.39 (30)
Twin
100
3.9
2.26 (20)
† Two stranded conductors placed in one UL Listed twin ferrule.
Lineside and loadside fork terminal
•
Fork terminal suitable for line, load or accessory connection, max.
30 A suitable for use with:
• 10-24 screw for 30 and 60 A switches
•
100 amp switches
1/4-28 screw for 100 A switches
Available Bussmann series fuses
UL fuse
class
CF
11-6
Type/description
Indicating time-delay, Low-Peak™
CUBEFuse (6-100 A)
Non-indicating time-delay, Low-Peak
CUBEFuse (1-100 A)
Non-indicating fast-acting CUBEFuse
(1-100 A)
Volts
Data
sheet
no.
600 Vac/
300 Vdc
9000
600 Vac/dc
2147
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
114
4.5
114
4.5
206
8.1
99
3.9
101
4.0
76
3.0
Right front rotary switches (shown with optional terminal shrouds)
83
3.3
99
3.9
76
3.0
30 A Fuse
99
3.9
101
4.0
83
3.3
30 A Fuse
99
3.9
89
3.5
60 A Fuse
89
3.5
60 A Fuse
30 and 60 amp switches
30 and 60 amp switches
101
4.0
76
3.0
206
8.1
148
5.8
101
4.0
76
3.0
240
9.5
148
5.8
240
9.5
100 106
3.9 4.2
100 amp switches
Disconnect
switches
Left front rotary switches (shown with optional terminal shrouds)
100 106
3.9 4.2
100 amp switches
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-7
11 — Disconnect switches
Left side rotary switches (shown with optional terminal shrouds)
114
4.5
114
4.5 206
8.1
206
8.1
83
3.3
75
3.0
101
4.0
Right side rotary switches (shown with optional terminal shrouds)
101
4.0
76
3.0
30 A Fuse
89
3.5
75
3.0
30 A Fuse
75
3.0
60 A Fuse
76
3.0
89
3.5
60 A Fuse
30 and 60 amp switches
101
4.0
83
3.3
75
3.0
30 and 60 amp switches
101
4.0
148
5.8
76
3.0
240
9.5
148
5.8
240
9.5
100
3.9
100
3.9
100 amp switches
11-8
100 amp switches
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
200 and 400 A switches
Poles
•
1-, 2- and 3-poles catalog number dependent
Agency information
•
UL 98 Listed, Guide WHTY, File E302370
•
cULus to Canadian Standard 22.2 No. 4-04, Guide WHTY7,
File E302370
•
RoHS compliant
400 A switch
200 A switch
•
See available lug table for size, type and torque information
Storage and operating temperature
•
-20°C to 75°C (-4°F to 167°F)*
* For fuse performance under or above 25°C, consult fuse performance derating
charts in the Bussmann Division publication no. 3002, titled Selecting Protective
Devices (SPD)
Lockout/tagout provisions using 1/4” lock
With front rotary accessory
Catalog no.
Poles
CCP2-1-200CF
1
CCP2-2-200CF
2
CCP2-3-200CF
3
CCP2-1-400CF
1
CCP2-2-400CF
2
CCP2-3-400CF
3
With side rotary accessory
Amps
Description
•
Integral with switch handle
•
Front rotary operating mechanism
•
Rotary pistol handles
•
Flange rod and cable operators
Minimum enclosure size
200
Switch only
400
Description
•
200 A switch 16 x 12 x 6” (405 x 305 x 150 mm)
•
400 A switch 24 x 16 x 8 (610 x 405 x 200 mm)
Mounting
•
Local open fuse indication minimum voltage
•
The Bussmann series 200 and 400 A Compact Circuit Protector
(CCP2) fused disconnect switches utilize the finger-safe UL Class CF
time-delay CUBEFuse with Class J electrical performance. With up
to a 69 percent smaller footprint than a traditional fusible solution,
these switches provide a high 200 kA SCCR to help improve panel
and assembly SCCR.
The panel mount 200 and 400 A CCP2 switches are available with
a variety of accessories to meet many application needs including
rotary and flange handle operation.
Rotary operators are available for front or side (right or left)
operation. Front rotary operators are for three-pole switches only
while the side operator may be applied to the right or left side of 1-,
2- and 3-pole units.
Panel mount
90 Vac, requires an open fuse to be in the CCP2 and the switch in
the ON position
Accessories
•
Lugs and lug kits with terminal shrouds
•
Pistol handles for use with rotary operated switches
•
NFPA 79 compliant handle
•
12 mm shafts for use with selector and pistol handles
•
Auxiliary contacts
•
Flange handle rod and cable operators
Other accessories include lugs, terminal shrouds, rotary pistol
handles, flange rod and cable operating mechanisms, NO/NC
auxiliary contacts that easily integrate into various monitoring
systems and a handle extension.
Front and side rotary operated versions are easily applied for
through-the-door or through the left or right side operation to
enhance safety.
Ratings
•
Volts
•
•
•
347 Vac (1-pole) 600 Vac (2- and 3-pole)
Amps
•
200 A
•
400 A
SCCR
•
200 kA RMS Sym.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-9
Disconnect
switches
Conductors/terminals
11 — Disconnect switches
Features
•
Uses UL Class CF time-delay CUBEFuse with Class J electrical
performance
•
Standard local open fuse indication light on each pole speeds
troubleshooting
•
Amp rating rejection feature will not accept a CUBEFuse amp
ratings greater than switch rating
•
Built-in switch interlock prevents inserting or removing fuse while
in the ON position
•
High 200 kA short-circuit current rating
•
Padlockable for lockout/tagout procedures with a 1/4” lock
•
Disconnect rated to provide means for load isolation
•
•
Full voltage rated at 600 Vac
•
UL 98 Listed and suitable for branch circuit disconnect and branch
circuit protection with installed fuses
Front and side rotary operator accessories provide for throughthe-door and through-the-side operation flexibility and enhanced
safety
•
•
Horsepower rated (see table below)
Optional pistol handles and shafts available for use with rotary
operator accessories
•
Multi-wire lug kits with terminal shrouds allow for power
distribution to multiple loads.
Catalog numbers and horsepower ratings
Catalog no.
200 amp switches
CCP2-1-200CF
CCP2-2-200CF
CCP2-3-200CF
400 amp switches
CCP2-1-400CF
CCP2-2-400CF
CCP2-3-400CF
Poles
Description
1
2
3
Switch only
1
2
3
Switch only
Volts AC
SCCR
240
Max Hp rating (Vac)
480
600
200 kA
—
10
50
—
—
100
—
—
150
200 kA
—
—
100
—
—
200
—
—
250
347
600
347
600
Available lugs, conductor ratings and terminal torques
Catalog no.
Description
200 A switches
CCP2-L2-1
Stainless steel lug
CCP2-L2-1A
Aluminum lug*
CCP2-MW2-3 3-port multi-wire terminal with shroud*
CCP2-MW2-6 6-port multi-wire terminal with shroud*
Lugs per
cat. no.
Wire range
AWG (mm2)
Wire type/
temp.
1
1
3
3
350-4 (185-25)
350-4 (185-25)
2-14 (35-2.5)
6-14 (16-2.5)
Cu 75°C
Cu/Al 75°C
Cu/Al 75°C
Cu/Al 75°C
Conductor torque Lug mounting screw
N•m (lb-in)
torque N•m (lb-in)
20.3 (180)
28.2 (250)
7.9 (70)
2.8 (25)
0.9 (8)
13.5 (120)
10.8 (95)
10.8 (95)
* These lugs also accept 1/4” quick connect control wire terminals. Order catalog number CCP2-CWK2 (package of 12 terminals).
400 A Switches
CCP2-L4-1
CCP2-L4-1A
CCP2-L4B-3
CCP2-L4B-3A
CCP2-L6-3
CCP2-L6-3A
Stainless steel lug
Aluminum lug
Stainless steel lug kit with shroud
Aluminum lug kit with shroud
2-port stainless steel lug kit with shroud
2-port aluminum lug kit with shroud
1
1
3
3
3
3
500-3 (240-35)
500-3 (240-35)
750-500 (400-240)
750-500 (400-240)
(2) 500-2 (240-35)
(2) 500-2 (240-25)
Cu 75°C
Cu/Al 75°C
Cu 75°C
Cu/Al 75°C
Cu 75°C
Cu/Al 75°C
42.0 (375)
42.0 (375)
57.0 (500)
62.0 (550)
42.0 (375)
42.0 (375)
10-14 = 3.9 (35)
CCP2-MW6-6
6-port multi-wire terminal with shroud
3
1/0-14 (50-2.5)
Cu/Al 75°C
8 = 4.5 (40)
4-6 = 5.0 (45
1/0-2 = 5.6 (50)
Accessories
Catalog no.
CCP2-TS2-3
CCP2-PB2
CCP2-RM2
CCP2-TS6-3
CCP2-PB6
CCP2-RM4
CCP2-SM
Switch
amps
200
400
200/400
Description
3-pole terminal shroud
Phase barriers (pack of 2)
Front rotary operator* (3-pole switch only)
3-pole terminal shroud
Phase barriers (pack of 2)
Front rotary operator* (3-pole switch only)
Side rotary operator* (1-, 2- or 3-pole switches)
* Complete installation requires pistol handle and shaft, order separately.
11-10
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
22.0 (200)
Disconnect switches — 11
200 amp switch dimensions — mm (in)
Ø 5.0 (0.2) Thru
Ø 9.2 (0.4) 5.4 (0.2)
133.2 (5.2)
104.7 (4.1)
160.4 (6.3)
119.7 (4.7)
85.4 (3.4)
Disconnect
switches
34.9 (1.4) 34.9 (1.4)
56.0
(2.2)
55.2
(2.2)
177.9
(7.0)
Front rotary
mechanism
accessory
CCP2-RM2
152.4
(6.0)
139.7
(5.5)
Side rotary
mechanism
accessory
CCP2-SM
34.9 (1.4)
87.3
(3.4)
335.9
(13.2)
34.9 (1.4)
119.7
(4.7)
3-pole terminal
shroud accessory
CCP2-TS2-3
104.8
(4.1)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-11
11 — Disconnect switches
400 amp switch dimensions — mm (in)
Ø 5.0 (0.2) Thru
Ø 14.0 (0.5) 5.9 (0.2)
175.8 (6.9)
132.8 (5.2)
159.3 (6.3)
130.8 (5.1)
102 (4.0)
43.6 (1.7) 43.6 (1.7)
56.0
(2.2)
98.8
(3.9)
257
(10.1)
Front rotary
mechanism
accessory
CCP2-RM4
225.0
(8.8) 214.4
(8.4)
Side rotary
mechanism
accessory
CCP2-SM
43.6 (1.7) 43.6 (1.7)
132.9
(5.2)
101.4
(4.0)
365.0
(14.3)
3-pole terminal
shroud accessory
CCP2-TS6-3
139.2
(5.4)
11-12
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
30, 60 and 100 A switch multi-wire lug kits
Installed on CCP2-3-xx
Catalog numbers
•
CCP2-MW1-3 (30 and 60 A switches only)
•
CCP2-MW1-6 (100 A switches only)
Description
The multi-wire lug kits permit expanding each box lug terminal on
the switch into a three-port (30 and 60 A switches) or six-port (100 A
switches) terminal for power distribution applications.
Disconnect
switches
Each multi-wire lug kit comes with three lugs and three terminal
shrouds. Shrouds provide finger-safe protection when properly
installed.
Lugs may be mounted on either the loadside or lineside to meet
various application needs.
Ports on any one lug accept any conductor combination listed, e.g.,
one of the ports may have dual 14 AWG wires and the other two
ports single 10 AWG wires.
Multi-wire lugs mount in switch box lug terminals to provide three
additional wire ports per pole. Lugs can be mounted on the switch
lineside or loadside. Each multi-wire lug kit comes with three lugs
and three shrouds.
Ratings
•
Volts 600 V
•
Amps
• 60 A max (CCP2-MW1-3)
•
•
Wire insulation strip lengths
100 A max (CCP2-MW1-6)
Agency information
•
UL Recognized, Guide WHTY2, File E302370
1 = 11/16”
•
RoHS compliant
2 = 1-1/8”
Storage and operating temperature
•
1/8” Allen
head screw
1/8” Allen
head screw
SCCR 200 kA
1 = 11/16”
2 = 1-1/8”
3 = 1-9/16”
3 = 1-9/16”
-20°C to 75°C (-4°F to 167°F)
Multi-wire lug conductor information
Strip back wire insulation to the lengths as indicated in the
illustration above and the table below.
•
75°C Cu/AL
•
AWG size and quantity per port - see table below
Type
Cu/Al
Cu
AWG
range
4-6
Class
Quantity
Torque
N•m (lb-in)
3.95 (35)
Stranded, Class B/C
Single
10-14
Stranded, Class B/C
Single/dual*
2.26 (20)
10-14
Solid
Single
2.26 (20)
UL ferrule, Class B to K
Single/twin†
8
8
10-14
2.82 (25)
Lug port
Strip wire insulation back (inch)
1
11/16
2
1-1/8
3
1-9/16
2.82 (25)
2.26 (20)
* Dual wire to be same size and type.
† Two stranded conductors placed in one UL Listed twin ferrule.
CCP2 box lug torque for multi-wire lugs
•
30/60 A switch lug, 4.52 N•m (40 lb-in)
•
100 A switch lug, 5.09 N•m (45 lb-in)
Wiring versatility is provided by single/dual rated box lug terminals
on the switch, or by the three-port or six-port multi-wire lug kits that
are also single/dual wire rated.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-13
11 — Disconnect switches
Installed on CCP2-3-xx
200 and 400 A switch multi-wire lug kits
Catalog numbers
•
CCP2-MW2-3 ( 3-port, 200 A switches only)
•
CCP2-MW2-6 (6-port, 200 A switches only)
•
CCP2-MW6-6 (6-port, 400 A switches only)
Description
The multi-wire lug kits permit expanding the terminal on the switch
into a three-port (200 A switches) or six-port (200 and 400 A
switches) terminal for power distribution applications.
Each multi-wire lug kit comes with three lugs and a 3-pole terminal
shroud. The shroud provides finger-safe protection when properly
installed.
3- and 6-port multi-wire lugs mounted on 200 A switches
Lugs can only be mounted on loadside to meet application needs.
Ports on any one lug accept any conductor combination listed, e.g.,
one of the ports may have dual 14 AWG wires and the other two
ports single 10 AWG wires.
Ratings
•
Volts 600 V
•
Amps
• 225 A max (CCP2-MW2-3 and CCP2-MW2-6)
•
•
600 A max (CCP2-MW6-6)
SCCR 200 kA
Agency information
•
UL Recognized, Guide WHTY2, File E302370
6-port multi-wire lugs mounted on 400 A switches
•
RoHS compliant
Multi-wire lugs mount on the switch terminals to provide three or
six additional wire ports per pole. Lugs to be mounted only on the
loadside. Each multi-wire lug kit comes with three lugs, a shroud and
mounting hardware.
Storage and operating temperature
•
-20°C to 75°C (-4°F to 167°F)
Multi-wire lug conductor information
Wire insulation strip lengths
•
75°C Cu/AL
•
AWG size and quantity per port - see table below
Type
AWG
range
Class
Quantity
Stranded, Class B/C
Single
10-14
Stranded, Class B/C
Single/dual*
2.26 (20)
10-14
Solid
Single
2.26 (20)
UL ferrule, Class B to K
Single/twin†
4-6
Cu/Al
Cu
Torque
N•m (lb-in)
8
8
10-14
* Dual wire to be same size and type.
† Two stranded conductors placed in one UL Listed twin ferrule.
3.95 (35)
2.82 (25)
1 = 3/8 to 1/2”
1 = 3/8 to 1/2”
2 = 3/4 to 7/8”
2 = 3/4 to 7/8”
3 = 1-1/4 to 1-3/8”
3 = 1-1/4 to 1-3/8”
CCP2-MW2-3
2 = 1-3/8 to 1-1/2”
3 = 2 to 2-1/8”
CCP2-MW6-6
CCP2-MW2-6
Wire insulation strip length (inch)
Lug kit
CCP2-MW2-3
CCP2-MW2-6
CCP2-MW6-6
11-14
1 = 3/4 to 7/8”
Strip back wire insulation to the lengths indicated in the illustration
above and the table below.
2.82 (25)
2.26 (20)
Straight blade
head screw
4 mm Allen
head screw
4 mm Allen
head screw
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Lug port 1
Lug port 2
Lug port 3
3/8 to 1/2
3/4 to 7/8
1-1/4 to 1-3/8
3/4 to 7/8
1-3/8 to 1-1/2
2 to 2-1/8
Eaton.com/bussmannseries
Disconnect switches — 11
Selector and pistol handles
Selector handles
Pistol handles —short and long
Catalog symbol
•
CCP2-H4X-_1 (selector handle for 30, 60 and 100 A switches)
•
CCP2-H4X-_2 (pistol handle for 30, 60 and 100 A switches)
•
CCP2-H4X-_3 (short pistol handle for 200 and 400 A switches)
•
CCP2-H4X-_4 (long pistol handle for 200 and 400 A switches)
Description
Installation requires an 8 mm shaft for 30, 60 and 100 A switches
and a 12 mm shaft for 200 and 400 A switches (ordered separately).
Each handle is rated Type 1, 4X and 12, and accepts up to three (3)
1/4” diameter shank locks for lockout/tagout in the OFF position.
They can also be field configured for lock-on and are defeatable.
Agency information
•
UL Listed, Guide DIHS/DIHS7, File E140305
•
Type 1, 4X and 12
•
RoHS compliant
•
CE
Disconnect
switches
Selector and pistol handles are used with rotary operated switches.
Pistol handles for 200 and 400 A switches come in short and long
versions. All handles are available in black/gray and red/yellow
colors, and clockwise/counterclockwise operating modes. Front and
right side operated switches use clockwise handles while left side
operated switches use counterclockwise handles.
Storage and operating temperature
•
-20°C to 75°C (-4°F to 167°F)
Only the clockwise operating handles in combination with front
rotary operating switches provide a door interlock means to ensure
the enclosure door remains shut during lockout/tagout or lock-on.
Rotary handles mounted on the enclosure’s left or right side do NOT
provide a door interlock means.
See the catalog number table below for applicable rotary switch,
handle and shaft combinations.
Handles and shafts for 30, 60 and 100 A switches
For catalog no.
CCP2R-(pole)-30CF
CCP2R-(pole)-60CF
CCP2R-(pole)-100CF
CCP2RL-(pole)-30CF
CCP2RL-(pole)-60CF
CCP2RL-(pole)-100CF
CCP2S-(pole)-30CF
CCP2S-(pole)-60CF
CCP2S-(pole)-100CF
Description/operation
Order handle cat. no.
Order either 8 mm shaft cat. no.
Right front rotary, clockwise
CCP2-H4X-B1 (selector, black/grey)
Left front rotary, clockwise
CCP2-H4X-R1(selector, red/yellow)
CCP2-H4X-B2 (pistol, black/grey)
CCP2-H4X-R2 (pistol, red/yellow)
Right side rotary, clockwise
CCP2SL-(pole)-30CF
CCP2-SH1-290 (11.5”/290 mm)
CCP2-SH1-490 (19.3”/490 mm)
CCP2-H4X-B1L (selector, black/grey)
Left side rotary,
counterclockwise
CCP2SL-(pole)-60CF
CCP2-H4X-R1L (selector, red/yellow)
CCP2-H4X-B2L (pistol, black/grey)
CCP2-H4X-R2L (pistol, red/yellow)
CCP2SL-(pole)-100CF
Handles and shafts for 200 and 400 A switches
For catalog no.
Order front
rotary
mechanism
cat. no.
CCP2-(poles)-200CF
CCP2-RM2*
Order right/
left side rotary
Order left side counterclockwise
mechanism
Order front/right side clockwise handles (use only with CCP2-SM)
cat. no.
handle cat. no.
cat. no.
CCP2-SM
CCP2-(poles)-400CF
CCP2-RM4*
CCP2-H4X-B3 (short - black/grey)
CCP2-H4X-B3L (short - black/grey)
CCP2-H4X-R3 (short - red/yellow)
CCP2-H4X-R3L (short - red/yellow)
CCP2-H4X-B4 (long - black/grey)
CCP2-H4X-B4L (long - black/grey)
CCP2-H4X-R4 (long - red/yellow)
CCP2-H4X-R4L (long - red/yellow)
Order either 12
mm shaft cat.
no.
CCP2-SH2-225
(8.9”/225 mm)
CCP2-SH2-425
(16.7”/425 mm)
* For three-pole switches only.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-15
11 — Disconnect switches
Handle dimensions — mm (in)
Handle shafts
Selector for 8 mm shafts
28
(1.1)
8 mm shafts
71
(2.8)
26
(1.0)
73
(2.9)
85
(3.3)
48
(1.9)
Ø7
(0.3)
85
(3.3)
71
(2.8)
Short pistol for 8 mm and 12 mm shafts
12 mm shafts
33
(1.3)
85
(3.3)
Ø7
(0.3)
71
(2.8)
85
(3.3)
96
(3.8)
69
(2.7)
ON
OFF
27
(1.1)
129
(5.1)
71
(2.8)
Catalog numbers
Long pistol for 12 mm shafts
85
(3.3)
34
(1.3)
Ø7
(0.3)
68
(2.7)
96 85
(3.8) (3.3)
28
(1.1)
71
(2.8)
179
(7.0)
71
(2.8)
•
CCP2-SH1-290 (8 mm, 290 mm long)
•
CCP2-SH1-490 (8 mm, 490 mm long)
•
CCP2-SH2-225 (12 mm, 225 mm long)
•
CCP2-SH2-425 (12 mm, 425 mm long)
Description
Square shafts available in:
•
8 mm square by 290 and 490 mm lengths for 30, 60 and 100 A
switches
•
12 mm square by 225 and 425 mm lengths for 200 and 400 A
switches
All shafts are indexed to ensure handle/switch orientation for correct
operation. Shafts are to be cut to length when installed.
NFPA 79 compliant handles
Catalog numbers
•
CCP2-NFPA-1
(8 mm shafts for 30-100 A switches)
•
CCP2-NFPA-2
(12 mm shafts for 200 and 400 A switches)
Description
NFPA 79 handles mount on the shaft of
front rotary operated switch installations and
provide a lockout means independent of the
door position.
11-16
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Flange handle rod and cable operators
Catalog no.
Description
Rating
30, 60 and 100 amp switches
CCP2-FLR1
Rod operator with painted handle
Type 1, 3R, 12
CCP2-FLR1X
Rod operator with chrome handle
Type 4X
CCP2-FLC1-36
36” Cable with painted handle
CCP2-FLC1-36X
36” Cable with chrome handle
Type 4X
CCP2-FLC1-60
60” Cable with painted handle
Type 1, 3R, 12
CCP2-FLC1-60X
60” Cable with chrome handle
Type 4X
CCP2-FLC1-120
120” Cable with painted handle
Type 1, 3R, 12
CCP2-FLC1-120X
120” Cable with chrome handle
Type 4X
Flange rod operator kit for 30, 60 and 100 A switches.
200 and 400 amp switches
CCP2-FLR2
Rod operator with painted handle
Type 1, 3R, 12
CCP2-FLR2X
Rod operator with chrome handle
Type 4X
CCP2-FLC2-36
36” Cable with painted handle
Type 1, 3R, 12
CCP2-FLC2-36X
36” Cable with chrome handle
Type 4X
CCP2-FLC2-60
60” Cable with painted handle
1, 3R, 12
CCP2-FLC2-60X
60” Cable with chrome handle
Type 4X
CCP2-FLC2-120
120” Cable with painted handle
Type 1, 3R, 12
CCP2-FLC2-120X
120” Cable with chrome handle
Type 4X
Description
Flange rod and cable operators for use on 2- and 3-pole CCP2
switches (cannot be used with 2- or 3-pole 30, 60 or 100 amp
switches already having a front or side rotary operating mechanism).
Flange rod operator kit for 200 and 400 A switches.
Handles are available in painted versions with NEMA 1, 3R and 12
ratings or chrome versions with a NEMA 4X rating.
Cable operators are available with 36, 60 and 120 inch cable
lengths.
Agency information
•
Type 1, 4X and 12
•
RoHS compliant
Storage and operating temperature
•
-20°C to 75°C (-4°F to 167°F)
Packaging
•
Each handle is packaged individually as a kit
Flange cable operator kit for 30, 60 and 100 A switches.
Flange cable operator kit for 200 and 400 A switches.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-17
Disconnect
switches
Type 1, 3R, 12
11 — Disconnect switches
Front rotary mechanisms for 200 and 400 A switches
Phase barriers
Catalog numbers
•
CCP2-PB2
(3-pole 200 A switches)
•
CCP2-PB6
(3-pole 400 A switches)
Description
Phase barrier kit with two phase
barriers for isolation between the
lugs on 3-pole 200 and 400 A
switches.
Catalog numbers
•
CCP2-RM2 (3-pole 200 A switches)
•
CCP2-RM4 (3-pole 400 A switches)
Packaged individually.
Handle extension
Description
Front rotary mechanisms for through-the-door operation and install
on the front of 3-pole switches only. These units provide at-switch
lockout/tagout capability for enhanced safety. Complete installation
requires installing pistol handle (short or long) and 12 mm shaft.
Packaged individually.
Side rotary mechanism for 200 and 400 A switches
Catalog number
•
CCP2-HEX (1-, 2- and 3-pole 200 and 400 A
switches)
Description
A handle extension to provide additional leverage for operating the
switch in installations that do not have rotary mechanisms or flange
operators installed. Does not mount on switch, provision for tether
provided.
Packaged individually.
Catalog number
•
CCP2-SM
(1-, 2- or 3-pole 200 and 400 A switches)
Description
Side rotary mechanism for through-the-side operation and installs
on the left or right side (right side installation recommended) of any
1-, 2- or 3-pole 200 and 400 A switch. The side rotary mechanism
does not provide for door interlock nor local lockout/tagout capability.
Complete installation requires installing pistol handle (short or long)
and 12 mm shaft.
Packaged individually.
Terminal shrouds
Catalog numbers
•
CCP2-TS2-3
(3-pole 200 A switches)
•
CCP2-TS6-3
(3-pole 400 A switches)
Description
3-pole shroud kit with
shields for isolating the
lugs on 3-pole 200 and
400 A switches.
Packaged individually.
11-18
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Auxiliary contacts for 30, 60 and 100 A switches
Installed on a CCP2-3-xx
Catalog numbers
Note: CCP2-AUX and CCP2-AUX-100 CANNOT be mounted on the
right front and right side rotary operated versions, nor installed with
the flange handle rod or cable operator.
•
CCP2-AUX (30 and 60 A switches)
•
CCP2-AUX-100 (100 A switches)
Description
Disconnect
switches
NO+NC contact output to indicate the
switching mechanism status on the
CCP2. A single unit can be mounted
on any 1-, 2- or 3-pole CUBEFuse
CCP2 switch and the left front/left side
rotary operated switches.
Ratings
•
240 Vac max
•
5 A max
•
NC/NO contacts are closed/open when the CCP2 switch is in the
“ON” position (closed)
Catalog no.
Switch
CCP2-AUX
30/60 A
only
CCP2-AUX-100
100 A
only
Description
Max per CCP2*
Ratings
Auxiliary contacts
N/NC for switch
status
1 per CCP2
(1-, 2- or 3-pole)
5 A / 240 Vac
Dimensions — in
1.8
* The CCP2-AUX CANNOT be mounted on the right front and right side rotary
operated versions, nor installed with the flange handle rod or cable operator.
De-energize all circuits and follow all prescribed safety procedures before
installing or removing the auxiliary contact device.
Agency information
•
UL 98 Recognized, Guide WHTY2, File E155130
•
cURus to Canadian Standard 22.2 No. 4-04
•
Finger-safe in installed state
•
RoHS compliant
•
CE
2.6
STRIP
33 NO
34 NO
41 NC
42 NC
Wiring
•
16-20 AWG (1.5 to 0.5 mm2) single and dual stranded wire
•
20 AWG (1.5 mm2) single and dual solid wire
•
Torque 0.56 N•m (5 lb-in)
•
Use only 75°C Cu wire
.190
3.7
0.3
CCP2-AUX
Packaging
•
1.9
1.8
CCP2-AUX and CCP2-AUX-100 are packaged individually
Installation technique
•
Mounts on the CCP2’s right side ONLY and mechanically
interlocks with the CCP2 switch handle with provided hardware.
The CCP2-AUX and CCP2-AUX-100 CANNOT be mounted on the
right front and right side rotary operated versions, nor installed
with the flange handle rod or cable operator.
2.9
33 NO
STRIP
34 NO
2.2
Storage and operating temperature
•
-20°C to 75°C (-4°F to 167°F)
42 NC
41 NC
.190
3.7
0.3
CCP2-AUX-100
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-19
11 — Disconnect switches
Auxiliary contacts for 200 and 400 A switches
Installed on a CCP2-3-xx
Catalog number
Note: CCP2-AUX-S CANNOT be mounted on the same side as the
side rotary mechanism CCP2-SM or the right side if a flange handle
rod or cable operator is installed.
•
CCP2-AUX-S (200 and 400 A switches)
Description
NO+NC contact output to indicate the
switching mechanism status on the
CCP2. A single unit can be mounted
on either side of any 1-, 2- or 3-pole
switch (cannot be mounted on the
same side as the CCP2-SM side
rotary mechanism or the right side if a
flange handle rod or cable operator is
installed).
Ratings
•
240 Vac max
•
5 A max
•
NC/NO contacts are closed/open when the CCP2 switch is in the
“ON” position (closed)
Catalog no.
CCP2-AUX-S
Switch
Description
Max per CCP2*
Ratings
200 and
400 A
Auxiliary contacts
NO+NC for switch
status
1 per CCP2
(1-, 2- or 3-pole)
5 A / 240 Vac
* The CCP2-AUX-S CANNOT be mounted on the same side where the side rotary
mechanism (CCP2-SM) is installed.
De-energize all circuits and follow all prescribed safety procedures before
installing or removing the auxiliary contact device.
Agency information
•
UL 98 Recognized, Guide WHTY2, File E155130
•
cURus to Canadian Standard 22.2 No. 4-04
•
Finger-safe in installed state
•
RoHS compliant
Wiring
•
16-20 AWG (1.5 to 0.5 mm2) single and dual stranded wire
•
20 AWG (1.5 mm2) single and dual solid wire
•
Torque 0.56 N•m (5 lb-in)
•
Use only 75°C Cu wire
Installation technique
•
Mounts on either side of the 200 and 400 A switches and
mechanically interlocks with the switch’s handle with provided
hardware. The CCP2-AUX-S CANNOT be mounted on the same
side with an installed CCP2-SM side rotary mechanism, or the
flange cable/rod operating mechanisms.
Storage and operating temperature
•
-20°C to 75°C (-4°F to 167°F)
Packaging
•
Packaged individually.
11-20
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
PLC fuse monitor for 30, 60 and 100 A switches
Agency information
Catalog numbers
•
UL 98 Recognized, Guide WHTY2, File E155130
•
cURus to Canadian Standard 22.2 No. 4-04
CCP2-PLC-IND
(30/60 A switches)
•
CCP2-PLC-100
(100 A switches)
Local indication
•
Description
A resettable three-phase
fuse monitor that integrates
with the I/O card in a
Programmable Logic
Controller (PLC). A single
unit can be mounted on any
1-, 2- or 3-pole CUBEFuse
CCP2 switch up to 100 A
and the left front/ left side
rotary operated switches.
A single unit monitors up to three phases. When used on 1- and
2-pole switches unused conductor(s) are removed after installation.
The CCP2-PLC-IND and CCP2-PLC-100 CANNOT be mounted on
the left front/left side rotary operated versions or if a multi-wire lug
kit is installed or if a multi-wire lug kit is installed, or if the flange
handle rod operator is installed.
Ratings
Signal output to PLC*
• +24 Vdc, 10 mA max
•
Output signals
• Digital 0 Vdc (low), 24 Vdc max (high)
0 Vdc Low – fuse is good
•
24 Vdc High – fuse has opened
Wiring
•
For power, signal and ground connections use shielded twisted
pair 22-24 AWG (0.34-0.25 mm2) 300 V rated wire
Installation technique
•
Mounts on the left side ONLY of the CCP2 and mechanically
interlocks with the CCP2 switch handle with hardware provided.
The CCP2-PLC-IND and CCP2-PLC-100 CANNOT be mounted on
the left front/left side rotary operated versions or if a multi-wire
lug kit is installed or if the flange handle rod operator is installed.
IP20 rating — yes
Storage and operating temperature
•
-20°C to 75°C (-4°F to 167°F)
PLC programming
•
•
Two distinct LEDs indicate unit power (green) and open fuse
(red). Open fuse LED is resettable upon fuse replacement and the
actuating the reset switch
•
The CCP2-PLC-IND or CCP2-PLC-100 signal line is designed
to provide a digital input to a PLC I/O card. In this case, a
Programmable Logic Control program must be written to properly
interpret the input signal to the PLC. The PLC program should
check for consecutive high signals before taking action on a
critical process.
* When the fuse opens, the output signal is sent high and will remain high until
the unit is reset.
Emissions and immunity testing
•
IEC 60947-1: Voltage Switchgear and Control Gear
•
IEC 61000-6-2: Electromagnetic Compatibility (EMC)
• IEC 61000-4-2: Electrostatic Discharge Immunity - Test at level
3 (6 kV-Contact Discharge) and level 2 (4 kV-Air Discharge)
•
IEC 61000-4-3: Electromagnetic Compatibility - Radiated, Radiofrequency, Electromagnetic Field Immunity test at level x (20
V/m)
•
IEC 61000-4-4: Electromagnetic Compatibility - Testing and
Measurement Techniques at level 3 (± 2kV - Power Port and
±1 kV - I/O Ports)
•
IEC 61000-4-5: Electromagnetic Compatibility - Surge Immunity
test at level 4 (±4 kV)
•
IEC 61000-4-6: Immunity to Conducted Disturbances at level 3 (10 V)
Catalog no.
CCP2-PLC-IND
CCP2-PLC-100
Switch Description
Max per
CCP2**
30/60 A Wired
only remote fuse 1 per CCP2
indication
(1, 2- or
3-pole)
100 A for PLC
only applications
Signal
output
to PLC
Min.
circuit
volts
24 Vdc/
10 mA
100 Vac
** The CCP2-PLC-IND and CCP2-PLC-100 CANNOT be mounted on the left front/
left side rotary operated versions or if a multi-wire lug kit is installed.
De-energize all circuits and follow all prescribed safety procedures before installing
or removing the CCP2-PLC-IND or CCP2-PLC-100.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-21
Disconnect
switches
•
11 — Disconnect switches
PLC wiring schematic
Installed on a CCP2-3-xx
PLC power supply
PLC fuse monitor
+24 Vdc
+24 Vdc
0 Vdc/Gnd
0 Vdc/Gnd
Signal
10 mA max.
The PLC fuse monitor needs
to be powered by the same
+24 Vdc and ground
(0 Vdc/Gnd return)
terminals that feed the
PLC input card.
If it is not, it may
improperly signal.
+24 Vdc
0 Vdc/Gnd
PLC
input card
CCP2-PLC-IND mounted on a 3-pole switch and using the fork
terminals. When mounted on a 2- or 1-pole switch, remove unused
leads.
If feeding multiple
PLC fuse monitors from
different power supplies,
there must be multiple
input cards being powered
by those same power
supplies as well.
Note: the CCP2-PLC-IND CANNOT be mounted on the left front/left
side rotary operated versions or if the multi-wire lug kit is installed or
if the flange handle rod operator is installed.
Dimensions — in
Pin interlocks with
CCP2 switch handle
SIG
GND
+24vDC
+24vDC
RESET
STATUS
2
4T
1.9
6T
5L
3
3
2.6
3L
2
2T
1L
1
1
ON
1.8
3.7
30 and 60 A CCP
0.3
Pin interlocks with
CCP2 switch handle
4T
2
2.2
6T
3
5L
3
2.9
3L
2
2T
1L
1
SIG
GND
+24vDC
+24vDC
RESET
STATUS
1
ON
2.0
3.7
0.3
100 A CCP
11-22
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Ordering a complete switch installation
30 and 60 A CCP2 switches
For a complete assembly, select from the following required and optional components, and accessories.
Switches
Amps
Poles
Switch (used alone or with flange cable or flange rod handles)
CCP2-1-30CF
1
CCP2-2-30CF
30
2
CCP2-3-30CF
Disconnect
switches
Required
Catalog no.
3
CCP2-1-60CF
1
CCP2-2-60CF
60
2
CCP2-3-60CF
3
And
Flange handle rod
operator
Description — 3-pole switches only
CCP2-FLR1-21
Red/black painted handle
CCP2-FLR1-21X
Chrome handle
Flange handle cable
operator
Description - 3-pole switches only, cannot be used with side or
front rotary mechanisms
CCP2-FLC1-36
36” cable, red/black painted handle
CCP2-FLC1-36X
36” cable, chrome handle
CCP2-FLC1-60
60” cable, red/black painted handle
CCP2-FLC1-60X
60” cable, chrome handle
CCP2-FLC1-120
120” cable, red/black painted handle
CCP2-FLC1-120X
120” cable, chrome handle
Multi-wire lug kits
Description
CCP2-MW1-3
3-port multi-wire, 75°C Cu/Al, 6-14, includes terminal shrouds, pack of 3
Terminal shrouds
Description
CCP2-TS1-3
Pack of 3
Auxiliary contacts
Description — mounts on right side, cannot be used with flange handle rod or
cable operator
CCP2-AUX
NO/NC, 5 A / 240 V
PLC fuse monitor
Description — mounts on left side, cannot be used with flange handle rod
operator
CCP2-PLC-IND
Signal output 24 Vdc / 10 mA
Rating
1, 3R and 12
4X
Optional
Or
Rating
Type 1, 3R, 12
Type 4X
Type 1, 3R, 12
Type 4X
Type 1, 3R, 12
Type 4X
Accessories
And
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-23
11 — Disconnect switches
Ordering a complete switch installation
30 and 60 A CCP2 clockwise rotary switches
For a complete assembly, select from the following required and optional components, and accessories.
Catalog no.
Switches
Amps
Poles
Right front rotary
CCP2R-2-30CF
2
30
CCP2R-3-30CF
CCP2R-2-60CF
3
2
60
CCP2R-3-60CF
3
Left front rotary
CCP2RL-2-30CF
2
30
CCP2RL-3-30CF
CCP2RL-2-60CF
3
2
60
CCP2RL-3-60CF
3
Right side rotary
CCP2S-2-30CF
CCP2S-3-30CF
CCP2S-2-60CF
3
2
60
CCP2S-3-60CF
Required
2
30
3
And
Rotary handles
Description
Rating
CCP2-H4X-B1
Selector handle — black/grey
CCP2-H4X-R1
Selector handle — red/yellow
Type 1, 4X, 12
CCP2-H4X-B2
Pistol handle — black/grey
CCP2-H4X-R2
Pistol handle — red/yellow
And
Shafts (8 mm)
Length
CCP2-SH1-290
290 mm
CCP2-SH1-490
490 mm
NFPA 79 compliant
handle
Color
CCP2-NFPA-1
Red
Multi-wire lug kits
Description
CCP2-MW1-3
3-port multi-wire, 75°C Cu/Al, 6-14, includes terminal shrouds, pack of 3
Optional
And
11-24
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Accessories
And
Description
CCP2-TS1-3
Pack of 3
Auxiliary contacts
Description — use with CCP2RL-(poles)-30/60CF switches
CCP2-AUX
NO/NC, 5 A / 240 V
PLC fuse monitor
Description — use with CCP2R-(poles)-30/60CF and CCP2S-(poles)-30/60CF
switches
CCP2-PLC-IND
Signal output 24 Vdc / 10 mA
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Disconnect
switches
Terminal shrouds
Eaton.com/bussmannseries
11-25
11 — Disconnect switches
Ordering a complete switch installation
30 and 60 A CCP2 counterclockwise switches
For a complete assembly, select from the following required and optional components, and accessories.
Catalog no.
Switches
Amps
Poles
Left side rotary
CCP2SL-2-30CF
2
30
CCP2SL-3-30CF
CCP2SL-2-60CF
3
2
60
CCP2SL-3-60CF
3
Required
And
Rotary handles
Description
Rating
CCP2-H4X-B1L
Selector handle — black/grey
CCP2-H4X-R1L
Selector handle — red/yellow
Type 1, 4X, 12
CCP2-H4X-B2L
Pistol handle — black/grey
CCP2-H4X-R2L
Pistol handle — red/yellow
And
Shafts (8 mm)
Length
CCP2-SH1-290
290 mm
CCP2-SH1-490
490 mm
NFPA 79 compliant
handle
Color
CCP2-NFPA-1
Red
Multi-wire lug kits
Description
CCP2-MW1-3
3-port multi-wire, 75°C Cu/Al, 6-14, includes terminal shrouds, pack of 3
Terminal shrouds
Description
CCP2-TS1-3
Pack of 3
Auxiliary contacts
Description —mounts on right side
CCP2-AUX
NO/NC, 5 A / 240 V
Optional
And
Accessories
And
11-26
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Ordering a complete switch installation
100 A CCP2 switches
For a complete assembly, select from the following required and optional components, and accessories.
Catalog no.
Amps
Poles
Switch (used alone or with flange cable or flange rod handles)
CCP2-1-100CF
1
CCP2-2-100CF
100
Disconnect
switches
Required
Switches
2
CCP2-3-100CF
3
And
Flange handle rod
operator
Description — 3-pole switches only
CCP2-FLR1-21
Red/black painted handle
CCP2-FLR1-21X
Chrome handle
Flange handle cable
operator
Description - 3-pole switches only, cannot be used with side or
front rotary mechanisms
CCP2-FLC1-36
36” cable, red/black painted handle
CCP2-FLC1-36X
36” cable, chrome handle
CCP2-FLC1-60
60” cable, red/black painted handle
CCP2-FLC1-60X
60” cable, chrome handle
CCP2-FLC1-120
120” cable, red/black painted handle
CCP2-FLC1-120X
120” cable, chrome handle
Multi-wire lug kits
Description
CCP2-MW1-6
6-port multi-wire, 75°C Cu/Al, 6-14, includes terminal shrouds, pack of 3
Rating
1, 3R and 12
4X
Optional
Or
Rating
Type 1, 3R, 12
Type 4X
Type 1, 3R, 12
Type 4X
Type 1, 3R, 12
Type 4X
Accessories
And
Terminal shrouds
Description
CCP2-TS1-6
Pack of 3
Auxiliary contacts
Description — mounts on right side, cannot be used with flange handle rod or
cable operator
CCP2-AUX-100
NO/NC, 5 A / 240 V
PLC fuse monitor
Description — mounts on left side, cannot be used with flange handle rod
operator
CCP2-PLC-100
Signal output 24 Vdc / 10 mA
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-27
11 — Disconnect switches
Ordering a complete switch installation
100 A CCP2 clockwise rotary switches
For a complete assembly, select from the following required and optional components, and accessories.
Catalog no.
Switches
Amps
Poles
Right front rotary
CCP2R-2-100CF
2
100
CCP2R-3-100CF
3
Left front rotary
CCP2RL-2-100CF
2
100
CCP2RL-3-100CF
3
Right side rotary
CCP2S-2-100CF
2
100
Required
CCP2S-3-100CF
3
And
Rotary handles
Description
Rating
CCP2-H4X-B1
Selector handle — black/grey
CCP2-H4X-R1
Selector handle — red/yellow
Type 1, 4X, 12
CCP2-H4X-B2
Pistol handle — black/grey
CCP2-H4X-R2
Pistol handle — red/yellow
And
Shafts (8 mm)
Length
CCP2-SH1-290
290 mm
CCP2-SH1-490
490 mm
NFPA 79 compliant
handle
Color
CCP2-NFPA-1
Red
Optional
And
11-28
Multi-wire lug kits
Description
CCP2-MW1-6
6-port multi-wire, 75°C Cu/Al, 6-14, includes terminal shrouds, pack of 3
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Terminal shrouds
Description
CCP2-TS1-6
Pack of 3
Auxiliary contacts
Description — cannot be used on right front or right side operated switches
CCP2-AUX-100
NO/NC, 5 A / 240 V
PLC fuse monitor
Description — Cannot be used on left front or left side operated switches
CCP2-PLC-100
Signal output 24 Vdc / 10 mA
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Disconnect
switches
Accessories
And
Eaton.com/bussmannseries
11-29
11 — Disconnect switches
Ordering a complete switch installation
100 A CCP2 counterclockwise switches
For a complete assembly, select from the following required and optional components, and accessories.
Catalog no.
Switches
Amps
Poles
Left side rotary
CCP2SL-2-100CF
2
100
CCP2SL-3-100CF
3
Required
And
Rotary handles
Description
Rating
CCP2-H4X-B1L
Selector handle — black/grey
CCP2-H4X-R1L
Selector handle — red/yellow
CCP2-H4X-B2L
Pistol handle — black/grey
CCP2-H4X-R2L
Pistol handle — red/yellow
Shafts (8 mm)
Length
CCP2-SH1-290
290 mm
CCP2-SH1-490
490 mm
NFPA 79 compliant
handle
Color
CCP2-NFPA-1
Red
Multi-wire lug kits
Description
CCP2-MW1-6
6-port multi-wire, 75°C Cu/Al, 6-14, includes terminal shrouds, pack of 3
Terminal shrouds
Description
CCP2-TS1-6
Pack of 3
Auxiliary contacts
Description — mounts on right side
CCP2-AUX-100
NO/NC, 5 A / 240 V
Type 1, 4X, 12
And
Optional
And
Accessories
And
11-30
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
The Bussmann series Low-Peak CUBEFuse is a UL Class CF currentlimiting, dual-element, time-delay branch circuit fuse with Class J
electrical performance. Available in indicating and non-indicating
versions, this finger-safe fuse has a very compact, space-saving
size and is easily applied using the CUBEFuse holder (TCFH_N),
UL 98 Compact Circuit Protector switch (CCP2-_CF) or Compact
Circuit Protector Base (CCP2B up to 100 A) used in the Quik-Spec
Coordination Panelboard).
Ratings
•
•
•
•
Smallest installed footprint of any UL Class CC, J, or R fuse
solution
•
Easy application using CUBEFuse holders (TCFH_N), UL 98
Compact Circuit Protector (CCP2) switches and Compact
Circuit Protector Base (CCP2B up to 100 A). See data sheet
9007 for details on the CUBEFuse holder, 10801 for details on
the CCP2-_CF switch and 1161 for the CCP2B.
•
Holders and switches have an amp rating rejection feature
to help prevent overfusing; 30, 60 and 100 A switches and
holders will hold any CUBEFuse up to its rating, 200 and 400
A switches and 200, 225 and 400 A holders will hold any
CUBEFuse 110 A and above up to its rating
•
UL Class CF with Class J time-delay electrical performance
•
Available in indicating and non-indicating versions
•
The indicating version features local easyID™ open fuse
technology for faster troubleshooting and reduced downtime
•
Faster response to damaging faults helps reduce destructive
thermal and magnetic forces
•
True dual-element fuse construction with a minimum 10
seconds time-delay at 500% of rating
•
Long time-delay minimizes nuisance openings caused by
temporary overloads and transient surges
•
Up to 300 kA interrupting rating safely interrupts virtually any
fault
•
Robust cycling and inrush current withstand
Low let-through currents under fault conditions
Volts
•
600 Vac
•
300 Vdc
Amps
•
6-400 A (indicating)
•
•
1-400 A (non-indicating)
•
Provides Type 2 “No Damage” protection for IEC motor starters
when properly sized
•
Easy selective coordination with any other Bussmann series
Low-Peak Class CC, J, L or RK1 fuse with simple 2:1 amp ratio
between upstream and downstream fuses
Interrupting rating
•
300 kA RMS Sym. (Up to 100 A UL)
•
200 kA RMS Sym. (110 to 400 A UL)
•
200 kA RMS Sym. (Up to 100 A CSA)
•
100 kA DC (Up to 400 A UL and up to 100 A CSA)
* Finger-safe status depends on final, installed application, and will require
using accessory shrouds for 110 to 400 A ratings.
CUBEFuse (cat. no. TCFH_N) holders
Agency information
•
UL Listed Class CF fuse: Guide JDDZ, File E4273 (up to 400 A)
•
CSA® Certified fuse: Class 1422-02,
File 053787_C_000 (up to 100 A)
•
CE
•
RoHS compliant
The CUBEFuse is also used in holders that can be dovetail
together for the smallest footprint possible of any Class J fuse
solution (see data sheet no. 9007 for details).
Finger-safe DIN-Rail or
panel mount holders up to
100 A.
• 30
A holder accepts any
CUBEFuse up to 30 A.
Catalog numbers (amps)
• 60
amp holder accepts any
CUBEFuse up to 60 A.
Indicating CUBEFuse
TCF6
TCF30
TCF70
TCF150
TCF350
TCF10
TCF35
TCF80
TCF175
TCF400
TCF15
TCF40
TCF90
TCF200
TCF17-1/2
TCF45
TCF100
TCF225
TCF20
TCF50
TCF110
TCF250
TCF25
TCF60
TCF125
TCF300
• 100
amp holder accepts any
CUBEFuse up to 100 A.
Panel mount holders from
200 to 400 A.
• 200
A holder accepts any
CUBEFuse from 110 to 200 A
Non-Indicating CUBEFuse
• 225
TCF1RN
TCF20RN
TCF50RN
TCF110RN
TCF250RN
TCF3RN
TCF25RN
TCF60RN
TCF125RN
TCF300RN
TCF6RN
TCF30RN
TCF70RN
TCF150RN
TCF350RN
TCF10RN
TCF35RN
TCF80RN
TCF175RN
TCF400RN
TCF15RN
TCF40RN
TCF90RN
TCF200RN
TCF17-1/2RN
TCF45RN
TCF100RN
TCF225RN
A* holder accepts any
CUBEFuse from 110 to 225 A
• 400
A holder accepts any
CUBEFuse from 110 to 400 A
Finger-safe installation
achievable for three ganged
holders and lug kits with
shroud
* 200 A and 225 A holders share the same overall dimensions, but the 200 A
holder will reject a 225 A fuse.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-31
Disconnect
switches
Features
About the UL Class CF CUBEFuse
11 — Disconnect switches
Ordering a complete switch installation
200 A CCP2 switches
For a complete installation, select from the following required and optional components, and accessories.
Catalog no.
Switches
Amps
Poles
CCP2-1-200CF
1
CCP2-2-200CF
200
2
Required
CCP2-3-200CF
3
And
Lug kits
Description
CCP2-L2-1
Stainless steel lug, 75° Cu only, 350 kcmil-4, 1 per pack
CCP2-L2-1A
Aluminum lug, 75°C Cu/Al, 350 kcmil-4, 1 per pack
CCP2-MW2-3
3-port multi-wire lug, 75°C Cu/Al, 2-14, 3 per pack, includes terminal shroud
CCP2-MW2-6
6-port multi-wire lug, 75°C Cu/Al, 6-14, 3 per pack, includes terminal shroud
And
Rotary
mechanisms
Description
CCP2-SM
Side rotary mechanism - mounts on left or right side of 1-, 2- and 3-pole switches
CCP2-RM2
Front rotary mechanism - mounts only on 3-pole switches, requires clockwise
rotating handle
Optional
And
Rotary handles
Description
Rotation - must match
switch rotation
CCP2-H4X-B3
Short pistol handle — black/grey
Clockwise
CCP2-H4X-R3
Short pistol handle — red/yellow
CCP2-H4X-B4
Long pistol handle — black/grey
CCP2-H4X-R4
Long pistol handle — red/yellow
For use with front rotary
mechanism or side rotary
mechanism CCP2-SM on
the switch’s right side
CCP2-H4X-B3L
Short pistol handle — black/grey
Counterclockwise
CCP2-H4X-R3L
Short pistol handle — red/yellow
CCP2-H4X-B4L
Long pistol handle — black/grey
CCP2-H4X-R4L
Long pistol handle — red/yellow
Use only if installing side
rotary mechanism CCP2SM on the switch’s left
side
Shafts (12 mm)
Length
CCP2-SH2-225
225 mm
CCP2-SH2-425
425 mm
NFPA 79
compliant handle
Color
CCP2-NFPA-2
Red
And
11-32
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Rating
Type 1, 4X, 12
Disconnect switches — 11
Flange handle rod
operator
CCP2-FLR2-21
Red/black, painted handle
CCP2-FLR2-21X
Chrome handle
Flange handle
cable operator
Description - 3-pole switches only,
cannot be used with side or front
rotary mechanisms
CCP2-FLC2-36
36“ cable, red/black painted handle
CCP2-FLC2-36X
36“ cable, chrome handle
CCP2-FLC2-60
60“ cable, red/black painted handle
CCP2-FLC2-60X
60“ cable, chrome handle
CCP2-FLC2-120
120“ cable, red/black painted handle
CCP2-FLC2-120X
120“ cable, chrome handle
Rating
Type 1, 3R and 12
Disconnect
switches
Optional
Or
Description — 3-pole switches
only, cannot be used with side or
front rotary mechanisms
Type 4X
Or
Rating
Type 1, 3R and 12
Type 4X
Type 1, 3R and 12
Type 4X
Type 1, 3R and 12
Type 4X
And
Terminal shrouds
Description
CCP2-TS2-3
3-pole terminal shroud with phase shields, 1 per pack
Phase barriers
Description
CCP2-PB2
Phase barriers, 2 per pack
Accessories
And
Control wire
terminals
Description
CCP2-CWK2
1/4” quick-connect control wire terminals - mounts on installed lug (cannot be used
with lug CCP2-L2-1), 12 per pack
Auxiliary contacts
Description
CCP2-AUX-S
NO/NC, 5 A, 240 V - Can be mounted on right or left side
Handle extension
Description
CCP2-HEX
Handle extension to facilitate operating 1-, 2 and 3-pole switches. Cannot be used
when side or front rotary mechanisms or flange handle rod or cable operators are
installed.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-33
11 — Disconnect switches
Ordering a complete switch installation
400 A CCP2 switches
For a complete installation, select from the following required and optional components, and accessories.
Catalog no.
Switches
Amps
Poles
CCP2-1-400CF
1
CCP2-2-400CF
400
2
CCP2-3-400CF
3
Required
And
Lug kits
Description
CCP2-L4-1
Stainless steel lug, 75° Cu only, 500 kcmil-3, 1 per pack
CCP2-L4-1A
Aluminum lug, 75° Cu only, 500 kcmil-3, 1 per pack
CCP2-L4B-3
Stainless steel lug, 75° Cu only, 750-500 kcmil, 3 per pack, includes terminal shroud
CCP2-L4B-3A
Aluminum lug, 75°C Cu/Al, 750-500 kcmil, 3 per pack, includes terminal shroud
CCP2-MW6-6
6-port multi-wire lug, 75°C Cu/Al, 1/0-14, 3 per pack, includes terminal shroud
CCP2-L6-3
2-port stainless steel lug, 75° Cu only, 500 kcmil-2, 3 per pack, includes terminal shroud
CCP2-L6-3A
2-port aluminum lug kit, 75° Cu/Al only, 500 kcmil-2, 3 per pack, includes terminal shroud
And
Rotary
mechanisms
Description
CCP2-SM
Side rotary mechanism - mounts on left or right side of 1-, 2- and 3-pole switches
CCP2-RM4
Front rotary mechanism - mounts only on 3-pole switches, requires clockwise
rotating handle
Optional
And
Rotary handles
Description
Rotation - must match
switch rotation
CCP2-H4X-B3
Short pistol handle — black/grey
Clockwise
CCP2-H4X-R3
Short pistol handle — red/yellow
CCP2-H4X-B4
Long pistol handle — black/grey
CCP2-H4X-R4
Long pistol handle — red/yellow
For use with front rotary
mechanism or side rotary
mechanism CCP2-SM on
the switch’s right side
CCP2-H4X-B3L
Short pistol handle — black/grey
Counterclockwise
CCP2-H4X-R3L
Short pistol handle — red/yellow
CCP2-H4X-B4L
Long pistol handle — black/grey
CCP2-H4X-R4L
Long pistol handle — red/yellow
Use only if installing side
rotary mechanism CCP2SM on the switch’s left
side
Shafts (12 mm)
Length
CCP2-SH2-225
225 mm
CCP2-SH2-425
425 mm
NFPA 79
compliant handle
Color
CCP2-NFPA-2
Red
And
11-34
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Rating
Type 1, 4X, 12
Disconnect switches — 11
Or
Description - 3-pole switches only, cannot be used with side
or front rotary mechanisms
CCP2-FLR2-21
Red/black, painted handle
CCP2-FLR2-21X
Chrome handle
Rating
Type 1, 3R, 12
Type 4X
Or
Flange handle
cable operator
Description - 3-pole switches only, cannot be used with side
or front rotary mechanisms
CCP2-FLC2-36
36“ cable, red/black painted handle
CCP2-FLC2-36x
36“ cable, chrome handle
Rating
Type 1, 3R, 12
Type 4X
CCP2-FLC2-60
60“ cable, red/black painted handle
CCP2-FLC2-60x
60“ cable, chrome handle
Type 1, 3R, 12
Type 4X
CCP2-FLC2-120
120“ cable, red/black painted handle
CCP2-FLC2-120x
120“ cable, chrome handle
Type 1, 3R, 12
Terminal shrouds
Description
CCP2-TS6-3
3-pole terminal shroud with phase shields, 1 per pack
Phase barriers
Description
CCP2-PB6
Phase barriers, 2 per pack
Type 4X
And
Accessories
And
Auxiliary contacts
Description
CCP2-AUX-S
NO/NC, 5 A, 240 V - Can be mounted on right or left side
Handle extension
Description
CCP2-HEX
Handle extension to facilitate operating 1-, 2 and 3-pole switches. Cannot be used
when side or front rotary mechanisms, or flange handle rod and cable mechanisms
are installed.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-35
Disconnect
switches
Optional
Flange handle rod
operator
11 — Disconnect switches
CUBEFuse Compact Circuit Protector Base
Agency information
2011/65/EU
•
UL 98 Listed, Guide WHTY, File E302370
•
cULus to Canadian Standard 22.2 No. 4, Guide WHTY7,
File E302370
•
RoHS compliant
•
CE
Lineside bolt-on bus connector and torque
•
Bolt-mounted design into Quik-Spec Coordination Panelboard bus
•
#10-32 UNC hex flange Phillips screw; 2.8 N•m (25 lb-In)
Loadside box lug terminal conductor data
1-Pole
2-Pole
3-pole
CCP2B-1-_CF
CCP2B-2-_CF
CCP2B-3-_CF
•
Loadside fork terminal
•
Description
The revolutionary Bussmann series Compact Circuit Protector
Base (CCP2B) with CUBEFus™ is a UL 98 horsepower rated fused
branch circuit disconnect. Primarily used in the Bussmann series
Quik-Spec™ Coordination Panelboard, the CCP2B with CUBEFuse
simplifies selective coordination for code complaince along with a
lockout/tagout feature for isolating individual branch circuit loads to
promote safe work practices.
Features
See conductor table for details
Max. 30 A suitable for use with #8-32 UNC screw
Lockout/tagout
•
1/4” lock
Local open fuse indication
•
Light illumination requires closed circuit and minimum 90 volts
Carton quantity and shipping weight
Item
up to 60 amp switches
70 to 100 amp switches
Poles
6
6
lbs (kg)
1.7 (0.77)
2.6 (1.18)
•
Uses finger-safe, current-limiting Class CF CUBEFuse with Class
J performance available, time-delay or fast-acting versions from 1
to 100 amps
•
Patented amp rating rejection feature helps prevent overfusing
•
High 200 kA short-circuit current rating
•
Disconnect rated to provide a means for load isolation
•
•
2- and 3-pole versions full voltage rated at 600 Vac
•
Up to 125 Vdc ratings
** For fuse performance under or above 25°C, consult fuse performance derating
charts.
•
UL 98 Listed for branch circuit disconnect
•
1-, 2- and 3-pole versions are horsepower rated
•
Listed to UL and cULus
•
Open fuse indication lamp per pole speeds troubleshooting
•
Additional open fuse indication can be provided by using the timedelay indicating CUBEFuse in ratings from 6 to 100 A
•
Built-in switch/fuse interlock prevents removing or installing a fuse
while energized
•
Permanent lockout/tagout and lock-on provision usign a 1/4” lock
Environmental data
Storage and operating temperature -20°C to 75°C**
Available Bussmann series fuses
UL fuse
class
CF
Specifications:
15, 20, 30, 40, 50, 60, 70, 90 and 100 A
Poles
•
Volts
Data sheet
no.
600 Vac/
300 Vdc
9000
600 Vac/dc
2147
Lineside bolt-on bus connector
Switch amp ratings and rejection breaks
•
Type/description
Indicating time-delay, Low-Peak
CUBEFuse (6-100 A)
Non-indicating time-delay,
Low-Peak CUBEFuse (1-100 A)
Non-indicating fast-acting
CUBEFuse (1-100 A)
Switch ON and OFF symbols
Lockout/tagout provision
1-, 2- and 3-poles
Volts
•
600 Vac (or less)
•
125 Vdc*
Switch handle
Local open fuse indication light
* Switch amp rating and installed fuse amp rating dependent, see catalog number
table for details.
CUBEFuse base
Loadside box lug and fork terminals
Data sheet no: 1161
11-36
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Box lug conductor data
Catalog
numbers
Poles
CCP2B-1-15CF
1
CCP2B-2-15CF
2
CCP2B-3-15CF
3
CCP2B-1-20CF
1
CCP2B-2-20CF
2
CCP2B-3-20CF
3
CCP2B-1-30CF
1
CCP2B-2-30CF
2
CCP2B-3-30CF
3
CCP2B-1-40CF
CCP2B-2-40CF
CCP2B-3-40CF
1
2
3
CCP2B-1-50CF
1
CCP2B-2-50CF
2
CCP2B-3-50CF
3
CCP2B-1-60CF
1
CCP2B-2-60CF
2
CCP2B-3-60CF
3
CCP2B-1-70CF
1
CCP2B-2-70CF
2
CCP2B-3-70CF
3
CCP2B-1-90CF
1
CCP2B-2-90CF
2
CCP2B-3-90CF
3
CCP2B-1-100CF
1
CCP2B-2-100CF
2
CCP2B-3-100CF
3
†
††
†††
*
**
Voltage
ratings
347 Vac,
125 Vdc
600 Vac,
125 Vdc
Accepts
CUBEFuse
amp range
Hp ratings
SCCR (Vac)†††
0.5 Hp @ 120 V
1.5 Hp @ 240 V
1 to 15
3 Hp @ 240 V
5 Hp @ 480 V
7.5 Hp @ 600 V
600 Vac
347 Vac,
125 Vdc
600 Vac,
125 Vdc
0.75 Hp @ 120 V
2 Hp @ 240 V
1 to 20
3 Hp @ 240 V
7.5 Hp @ 480 V
10 Hp @ 600 V
600 Vac
347 Vac,
125 Vdc
600 Vac,
125 Vdc
1.5 Hp @ 120 V
3 Hp @ 240 V
1 to 30
5 Hp @ 240 V
15 Hp @ 480 V
10 Hp @ 600 V
600 Vac
347 Vac,
125 Vdc
600 Vac,
125 Vdc
7.5 Hp @ 240 V
20 Hp @ 480 V
10 Hp @ 600 V
1 to 50
1 to 60
600 Vac
3-12
75°C Cu
3.0 Hp @ 120 V
5 Hp @ 240 V
100 kA 7.5 Hp @ 240 V
DC
20 Hp @ 480 V
10 Hp @ 600 V
7.5 Hp @ 240 V
1 to 70
Class
Torque
N•m (lb-in)
Quantity
Stranded, Class B
to K
Stranded, Class B/C
Stranded, Class K
Stranded, Class B
to K
Solid
Stranded, UL ferrule,
Class B/C
Stranded, UL
ferrule, Class K
3.95 (35)
2.26 (20)
3.39 (30)
Single
Dual
2.26 (20)
Single/dual
Single
Twin†
Single
Twin†
2.26 (20)
3.39 (30)
2.82 (25)
Stranded, Class B
to K
Single
2.26 (20)
2.82 (25)
4.52 (40
5.08 (45)
6.21 (55)
Stranded, Class B
to K
Dual
3.95 (35)
2.26
3.95
4.52
2.26
2.82
2.26
2.26
2.26
3.39
5.08
2.26
3.39
2.26
Single
Stranded, UL
ferrule, Class B/C
Twin†
Single
Dual
Solid
Single
Class K
Dual
Single
Class K, UL ferrule
Twin
Dimensions — in (mm)
Ø 0.2
(Ø 5.1)
3.0
(76)
2.0
(51)
1.0
(25)
0.5
(13)
2.7
(69)
7.5 Hp @ 240 V
15 Hp @ 240 V
30 Hp @ 480 V
40 Hp @ 600 V
3.9
(99)
15-60 A
5.3
(133)
70-100 A
5.0 Hp @ 120 V
1 to 90
10 Hp @ 240 V
20 Hp @ 240 V
50 Hp @ 480 V
40 Hp @ 600 V
Ø 0.2
(Ø 5.1)
5.0 Hp @ 120 V
1 to 100
(20)
(35)
(40)
(20)
(25)
(20)
(20)
(20)
(30)
(45)
(20)
(30)
(20)
† Two stranded conductors placed in one UL Listed twin ferrule.
3.0
(76)
2.0
(51)
1.0
(25)
0.03
(0.8)
2.9
(73)
2.7
(70)
0.54
(14)
10 Hp @ 240 V
20 Hp @ 240 V
50 Hp @ 480 V
40 Hp @ 600 V
1 and 3 A indicating CUBEFuse not available. Correct fit with CCP2B disconnect requires indicating CUBEFuse with date code R38 or later.
Not for use with motors.
Indicating or non-indicating time-delay CUBEFuse only.
125 Vdc for installed fuse amp ratings up to 40 A. 24 Vdc for installed fuse
amp ratings from 45 to 60 A.
125 Vdc for installed fuse amp ratings up to 80 A, 24 Vdc for installed fuse
amp ratings from 90 to 100 A.
Data sheet no: 1161
12-18
10
1-8
10-18
6-8
10-18
10-18
8-18
1-6
3-10
8-18
1-6
6-18
3.0 Hp @ 120 V
600 Vac
347 Vac,
125 Vdc**
600 Vac,
125 Vdc**
200 kA
AC
7.5 Hp @ 240 V
20 Hp @ 480 V
10 Hp @ 600 V
600 Vac
347 Vac,
125 Vdc**
600 Vac,
125 Vdc**
10-18
4-18
6-18
4-18
6-18
70 to 100 A switches
12-18
10
8
4-6
1-3
3.0 Hp @ 120 V
600 Vac
347 Vac,
125 Vdc
600 Vac,
125 Vdc
10-18
75°C Cu
3 Hp @ 240 V
1 to 40
600 Vac
347 Vac,
125 Vdc*
600 Vac,
125 Vdc*
6-8
2.0 Hp @ 120 V
600 Vac
347 Vac,
125 Vdc*
600 Vac,
125 Vdc*
AWG
Wire type
range
15 to 60 A switches
4-6
8-18
3.4
(86)
For details on the CCP2B and its use in the Quik-Spec Coordination
Panelboard, see data sheet no. 1160.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-37
Disconnect
switches
Catalog numbers and ratings
11 — Disconnect switches
Compact Circuit Protector (cat. no. CCP2)
For use with Class CC, Supplemental and IEC 10x38 mm fuses
Class CC and midget CCP contents
Section page
Description and specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-40
Catalog numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Conductor information and available fuses . . . . . . . . . . . . . . . . . . . . . 42
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Accessories
Multi-wire lug kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Selector and pistol handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
NFPA 79 compliant handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Shafts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Auxiliary contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
PLC fuse monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-47
How to order tables
Clockwise rotary operated switches . . . . . . . . . . . . . . . . . . . . . . . .48-49
CCP2 switch
11-38
Switches only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Counterclockwise rotary operates switches . . . . . . . . . . . . . . . . . . . . 51
CCP2 right front rotary switch
CCP2 left front rotary switch
CCP2 right side rotary switch
CCP2 left side rotary switch
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Symbol
CCP2-(poles)-30CC
CCP2-(poles)-30M
CCP2-1-DCC
CCP2-1-DCM
CCP2R-(pole)-30CC
CCP2R-(pole)-30M
CCP2RL-(pole)-30CC
CCP2RL-(pole)-30M
CCP2S-(pole)-30CC
CCP2S-(pole)-30M
CCP2SL-(pole)-30CC
CCP2SL-(pole)-30M
•
Fuse type
Class CC
UL sup./IEC 10x38
Class CC Vdc
UL sup./IEC 10x38 Vdc
Class CC
UL sup./IEC 10x38
Class CC
UL sup./IEC 10x38
Class CC
UL sup./IEC 10x38
Class CC
UL sup./IEC 10x38
Description
Switch only
1-pole switch only
•
UL Supplemental and IEC 10x38 mm fuse versions
•
UL 508 Listed, Guide NRNT, File E320230
•
cULus Certified 22.2 No. 14-05
•
IEC 60947-3 AC-23A
DC voltage UL Class CC version (CCP2-1-DCC)
•
UL 508 Listed, cULus 22.2, No. 1405
DC IEC 10x38 version (CCP2-1-DCM)
Right front rotary switch
•
Left front rotary switch
•
RoHS compliant
•
CE
•
Right side rotary switch
IEC 60947-3, DC-23A
Disconnect
switches
Catalog symbols
Conductors/terminals
•
75°C Cu/Al, see conductor tables for size, type and torque
information
•
Box lug, single/dual conductor
The revolutionary next generation Bussmann™ series Compact
Circuit Protector (cat. no. CCP2) fused disconnect switch is 3/5 the
footprint of a traditional fusible switch and provides up to a high 200
kA Short-Circuit Current Rating (SCCR) to help improve panel and
assembly SCCR.
•
Fork terminal suitable for line, load or accessory connection
•
Multi-wire lug kit — see accessories for details
The 35 mm DIN-Rail mount CCP is available in a variety of
configurations to meet many application needs including rotary
operation.
•
Left side rotary switch
Description
Application flexibility is extended with an optional multi-wire lug kit,
with finger-safe shrouds, that provides three additional wire ports on
each pole for power distribution applications.
Other accessories include a PLC interface device for open fuse
monitoring and NO/NC auxiliary contacts that easily integrate into
many monitoring systems.
Storage and operating temperature
- 20°C to 75°C (-4°F to 167°F)*
* For fuse performance under or above 25°C, consult fuse performance derating
charts in the Bussmann Division publication no. 3002, titled Selecting Protective
Devices (SPD)
Lockout/tagout provisions
•
Switch only — 4 mm lock or Brady pin-out device part number
90850
•
Switch with rotary operating mechanism — 1/4” lock
Front and side rotary operated versions are easily applied for
through-the-door or through the left or right side operation to
enhance safety.
Minimum enclosure size
Ratings
Mounting
•
•
•
•
•
Volts
10” x 8” x 6” (254 x 203 x 152 mm)
35 mm DIN-Rail
•
600 Vac (UL Class CC)
Local open fuse indication minimum voltage**
•
240 Vac (UL Supplemental)
•
90 Vac for AC switches
•
400 Vac (IEC 10x38 mm)
•
12 Vdc for DC switches
•
80 Vdc (DC Class CC, DC UL Supplemental/IEC)
®
Amps
•
30 A (UL)
•
32 A (IEC)
** Open fuse indication requires an open fuse to be in the CCP2 and the switch
in the ON position.
Accessories
SCCR
•
Multi-wire lug kit with terminal shrouds
•
200 kA (UL Class CC)
Selector and pistol handles for use with rotary operated switches
•
•
10 kA (UL Supplemental)
8 mm shafts for use with selector and pistol handles
•
•
120 kA (IEC 10x38 mm max)
Auxiliary contacts
•
•
20 kA (DC Class CC/UL)
PLC fuse monitor
•
•
10 kA (DC UL Supplemental/IEC)
Poles
•
1-, 2- and 3-poles catalog number dependent
Agency information
•
UL Class CC fuse versions
• UL 98 Listed, Guide WHTY, File E302370
•
cULus to Canadian Standard 22.2 No. 4-04, UL Guide WHTY7,
File 302370
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-39
11 — Disconnect switches
Features
•
Extremely compact (18 mm wide per pole ) design
•
High SCCR up to 200 kA (UL Class CC) and 120 kA (IEC)
•
Disconnect rated for load isolation
•
Full voltage rated up to 600 Vac or 80 Vdc
•
UL 98 Listed Class CC version is horsepower rated and suitable
for branch circuit protection and disconnect
•
IEC 10x38 version complies with IEC 60947-3 and suitable for
branch circuit protection and disconnect
•
Suitable for global installations, the switches comply with UL,
cULus and IEC standards accepting UL Class CC, Supplemental
or IEC aM and gG/gL fuses
•
Open fuse indication
•
Standard local open fuse indicating light for each pole
•
Optional PLC fuse monitor can be utilized to signal a PLC and
open a contactor to de-energize all phases, if required
•
IP20 finger-safe with 10 AWG (6 mm2) or larger wire (box lug
terminals only)
•
Built-in switch interlock prohibits removing the fuse under load
•
Padlockable handle for lockout/tagout
• 4 mm lock for switch only
•
•
1/4” lock for rotary operated switches
Rotary operated versions provide for through-the-door and
through-the-side operation flexibility and enhanced safety with:
•
Right front switch operation
•
Left front switch operation
•
Right side switch operation
•
Left side switch operation
Right front rotary operated CCP2 switch with PLC fuse monitor.
•
Optional selector and pistol handles available for use with rotary
operated versions
•
Multi-wire lug kit with terminal shrouds allows for power
distribution to multiple loads. Each lug has three ports rated for
single and dual wires (see lug kit in accessories for conductor and
torque details).
Open fuse
indicating light
Rotary operating switch versions
Switch handle
(ganged on 2- and
3-pole versions)
Fuse access door
Left front rotary switch
Right front rotary switch
Clockwise operating handles
Clockwise operating handles
Fork terminal
Box lug terminal
Lockout/tagout
provision
11-40
Right side rotary switch
Left side rotary switch
Clockwise operating handles
Counterclockwise operating
handles
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Catalog numbers
Max horsepower rating (Vac)
Catalog no.
Poles
Description
Amps
Volts
SCCR
Wire type/
size*
120
240
480
600
1/2
—
—
—
—
2
—
—
3/4
3
5
7.5
7.5
75°C Cu/Al
CCP2-1-30CC
1
CCP2-2-30CC
2
CCP2-3-30CC
3
CCP2R-2-30CC
2
CCP2R-3-30CC
3
CCP2RL-2-30CC
2
CCP2RL-3-30CC
3
CCP2S-2-30CC
2
CCP2S-3-30CC
3
CCP2SL-2-30CC
2
CCP2SL-3-30CC
3
347 Vac
Switch only
600 Vac
Switch with right
front rotary operation
Switch with left front
rotary operation
600 Vac
30 A
600 Vac
Switch with right side
rotary operation
600 Vac
Switch with left side
rotary operation
600 Vac
200 kA
—
2
3/4
3
5
—
2
—
—
18-4 AWG
3/4
3
5
7.5
Fork terminal††
—
2
—
—
3/4
3
5
7.5
—
2
—
—
3/4
3
5
7.5
UL Supplemental and IEC 10x38 mm
CCP2-1-30M
1
CCP2-2-30M
2
CCP2-3-30M
3
CCP2R-2-30M
2
CCP2R-3-30M
3
CCP2RL-2-30M
2
CCP2RL-3-30M
3
CCP2S-2-30M
2
CCP2S-3-30M
3
CCP2SL-2-30M
2
CCP2SL-3-30M
3
Switch only
Switch with right
front rotary operation
Switch with left front
rotary operation
UL 30 A
IEC 32 A**
UL 240 Vac†
IEC 400 Vac†
75°C Cu/Al
UL 10 kA†
IEC 120 kA†
—
—
—
—
18-4 AWG
Fork terminal††
Switch with right side
rotary operation
Switch with left side
rotary operation
Single-pole DC switches
CCP2-1-DCC
1
CCP2-1-DCM
1
UL Class CC
30 A
UL supplemental
30 A
IEC 10x38
32 A**
80 Vdc†
20 kA†
—
—
—
—
80 Vdc†
10 kA†
—
—
—
—
75°C Cu/Al
18-4 AWG
Fork terminal††
* See box lug terminal conductor data table for details.
** 32 A Class aM, 25 A Class gG.
† SCCR may be lower, refer to installed fuse data sheet for interrupting rating at applied voltage.
†† Fork terminal with a 4.3 mm gap for a #8-32 stud, 30 A max, insulated flange, wire size 12-10 AWG.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-41
Disconnect
switches
Class CC
11 — Disconnect switches
Box lug terminal conductor data
Type
Cu
AWG
range
4-18
6-8
6-8
10-18
Class
Stranded,
Stranded,
Stranded,
Stranded,
10-18
Solid
4-18
6-18
4-18
6-18
Class
Class
Class
Class
B to K
B/C
K
B to K
Left front and right front rotary switches
Quantity
Single
Dual
Dual
6
78
3.1
99
3.9
49
1.9
53
2.1
35
1.4
18
0.7
2.26 (20)
Single/dual
Single
Stranded, UL ferrule, Class B/C
3.39 (30)
Twin†
Single
Stranded, UL ferrule, Class K
Single
Stranded
2.26 (20)
80
3.1
2.82 (25)
Dual
8
93
3.7
2.82 (25)
Twin†
4-8
Al
Torque
N•m (lb-in)
2.26 (20)
3.39 (30)
2.26 (20)
99
[3.9]
† Two stranded conductors placed in one UL Listed twin ferrule.
49
[1.9]
18
[0.7]
35
[1.4]
78
[3.1]
53
[2.1]
Available Bussmann series fuses
Fuse
class
CC
M
gG/gL
aM
Type/description
LP-CC time-delay
FNQ-R time-delay
KTK-R fast-acting
FNM time-delay
FNQ time-delay
KTK fast-acting
BAF fast-acting
KLM fast-acting
C10G
C10M
Data
sheet
Volts
no.
600 Vac/300 Vdc*
1023
600 Vac/300 Vdc
1014
600 Vac
1015
250 Vac
2028
500 Vac
1012
600 Vac
1011
250 Vac
2011
600 Vac/dc
2020
500 V (400 V@32 A)
720115
500 V (400 V@20@25 A) 720115
93
[3.7]
93
[3.7]
80
[3.1]
Left side and right side rotary switches
78
3.1
* 1/2 to 2-1/2 and 20 to 30 A are 300 Vdc, 2-8/10 to 15 A are 150 Vdc.
Dimensions – mm (in)
53
2.1
35
1.4
49
1.9
18
0.7
93
3.7
Switch
49
1.9
18
0.7
35
1.4
53
2.1
80
3.1
49
1.9
18
0.7
35
1.4
93
3.7
93
3.7
80
3.1
80
3.1
11-42
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
53
2.1
78
3.1
Disconnect switches — 11
Installed on CCP2-3-xx
Multi-wire lug kit
Catalog number
•
CCP2-MW1-3
Description
The multi-wire lug kit permits expanding each box lug terminal
on the switch into a three-port terminal for power distribution
applications.
Disconnect
switches
Each multi-wire lug kit comes with three (3) three-port lugs and
three terminal shrouds. Shrouds provide finger-safe protection when
properly installed.
Lugs may be mounted on either the loadside or lineside to meet
various application needs.
Ports on any one lug accept any conductor combination listed, e.g.,
one of the three ports may have dual 14 AWG wires and the other
two ports single 10 AWG wires.
Ratings
•
Volts 600 V
•
Amps 60 A max
•
SCCR 200 kA
Multi-wire lugs mount in switch box lug terminals to provide three
additional wire ports per pole. Lugs can be mounted on the switch
lineside or loadside. Each multi-wire lug kit comes with three lugs
and three shrouds.
Agency information
Wire insulation strip lengths
•
UL Recognized (lug only)
•
RoHS compliant
1/8” Allen
head screw
Storage and operating temperature
•
1 = 11/16”
- 20°C to 75°C (-4°F to 167°F)
2 = 1-1/8”
Multi-wire lug conductor information
3 = 1-9/16”
•
75°C Cu/AL
•
AWG size and quantity per port - see table below
Type
Cu/Al
Cu
AWG
range
Class
Quantity
Stranded, Class B/C
Single
10-14
Stranded, Class B/C
10-14
4-6
8
8
10-14
Torque
N•m (lb-in)
Strip back wire insulation to the lengths as indicated in the
illustration above and the table below.
3.95 (35)
Lug port
2.82 (25)
1
11/16
Single/dual*
2.26 (20)
2
1-1/8
Solid
Single
2.26 (20)
3
1-9/16
UL ferrule, Class B to K
Single/twin
†
Strip wire insulation back (inch)
2.82 (25)
2.26 (20)
* Dual wire to be same size and type.
† Two stranded conductors placed in one UL Listed twin ferrule.
CCP2 box lug torque for multi-wire lug
•
4.52 N•m (40 lb-in)
Terminal shroud accessory
Terminal shrouds are available without multi-wire terminals.
Catalog no.
Description
CCP2-TS1-3
Pack of three
Wiring versatility is provided by single/dual rated box lug terminals
on the switch, or by the three-port multi-wire lug kit that’s also
single/dual wire rated.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-43
11 — Disconnect switches
Selector handles
Selector and pistol handles
Catalog symbol
•
CCP2-H4X-_
Description
Selector and pistol handles for use with any 2- and 3-pole CCP2
rotary operated switch. Both selector and pistol handles are available
in black/grey and red/yellow colors and clockwise/counterclockwise
operating modes. Applying clockwise and counterclockwise
operation depends upon the CCP2 rotary switch configuration.
Installation requires an 8 mm shaft (ordered separately).
Pistol handles
Each handle is rated NEMA 4X and capable of accepting up to three
(3) 1/4” diameter shank locks for lockout/tagout in the OFF position.
They can also be field configured for lock-on.
In application, only the clockwise operating handles in combination
with either the left front or right front rotary switches provide a door
interlock means to ensure the enclosure door remains shut during
lockout/tagout or lock-on. Both clockwise and counterclockwise
operating handles when mounted on the enclosure’s left or right side
do NOT provide a door interlock means.
See the catalog number table below for applicable rotary switch,
handle and shaft combinations.
Handle shafts
Agency information
•
UL Listed, Guide DIHS, File E140305
•
NEMA 4X rating
•
RoHS compliant
•
CE
Storage and operating temperature
•
NFPA 79 compliant handle
-20°C to 75°C (-4°F to 167°F)
Packaging
•
Catalog number
Each handle is packaged individually
•
Handle shafts
NFPA 79 compliant handle mounts on
the shaft of front rotary operated switch
installations and provide a lockout means
independent of the door position.
Catalog symbol
•
CCP2-NFPA-1
Description
CCP2-SH1-_
Description
Eight millimeter square shafts available in 290 and 490 millimeter
(11.5 and 19.3 inch) lengths. Shafts are indexed to ensure handle/
switch orientation for correct operation. Shafts are cut to length
when installed.
Packaging
•
Each shaft is packaged separately
For these switch
catalog numbers
CCP2R-(pole)-30CC
CCP2R-(pole)-30M
CCP2RL-(pole)-30CC
CCP2RL-(pole)-30M
CCP2S-(pole)-30CC
CCP2S-(pole)-30M
Description/operation
Right front rotary, clockwise
Left front rotary, clockwise
Right side rotary, clockwise
Left side rotary, counterclockwise
11-44
Order either shaft catalog number
• CCP2-H4X-B1 (selector, black/grey)
• CCP2-H4X-R1(selector, red/yellow)
• CCP2-H4X-B2 (pistol, black/grey)
• CCP2-SH1-290 (11.5”/290 mm)
• CCP2-H4X-R2 (pistol, red/yellow)
• CCP2-H4X-B1L (selector, black/grey)
CCP2SL-(pole)-30CC
CCP2SL-(pole)-30M
Order these handle catalog numbers
(description)
• CCP2-SH1-490 (19.3”/490 mm)
• CCP2-H4X-R1L (selector, red/yellow)
• CCP2-H4X-B2L (pistol, black/grey)
• CCP2-H4X-R2L (pistol, red/yellow)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Auxiliary contacts
Installed on a CCP2-3-xx
Catalog number
Note: CCP2-AUX CANNOT be mounted on the right front and right
side rotary operated versions.
•
CCP2-AUX
Description
Disconnect
switches
NO+NC contact output to indicate the
switching mechanism status on the
CCP2. A single unit can be mounted
on any 1-, 2- or 3-pole CCP2 switch
and the left front/left side rotary
operated switches.
Ratings
•
Amps up to 5 A
•
Volts up to 240 Vac
•
NC/NO contacts are closed/open when the CCP2 switch is in the
“ON” position (closed)
Description
Max per CCP2*
Signal output
Auxiliary contacts NO+NC
for switch status
1 per CCP2
(1-, 2- or 3-pole)
5 A / 240 Vac
Dimensions — in
1.8
* The CCP2-AUX CANNOT be mounted on the right front and right side rotary
operated versions.
De-energize all circuits and follow all prevailing safety procedures before
installing or removing the CCP2-AUX.
2.6
Agency information
•
UL 98 Recognized, Guide WHTY2, File E155130
•
cURus to Canadian Standard 22.2 No. 4-04
•
IP20 finger-safe in installed state
•
RoHS compliant
•
CE
STRIP
33 NO
34 NO
41 NC
42 NC
3.7
1.9
0.19
0.3
Wiring
•
75°C Cu, 20-16 AWG (0.5 to 1.5 mm2) wire
•
Torque 0.56 N•m (5 lb-in)
Packaging
•
The CCP2-AUX is packaged individually
Installation technique
•
Mounts on the CCP2’s right side ONLY and mechanically
interlocks with the CCP2 switch handle with provided hardware.
The CCP2-AUX CANNOT be mounted on the right front and right
side rotary operated versions.
Storage and operating temperature
•
-20°C to 75°C (-4°F to 167°F)
CCP2-AUX auxiliary contacts mounted on a 3-pole CCP2 switch.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-45
11 — Disconnect switches
PLC fuse monitor
Wiring
Catalog number
•
•
CCP2-PLC-IND
Packaging
Description
A resettable three-phase
fuse monitor that integrates
with the I/O card in a
Programmable Logic
Controller (PLC). A single
unit can be mounted on
any 1-, 2- or 3-pole CCP2
switch and the right front/ right side rotary operated switches.
A single unit monitors up to three phases. When used on 1- and
2-pole switches unused conductor(s) are removed after installation.
The CCP2-PLC-IND CANNOT be mounted on the left front/left side
rotary operated versions or if the multi-wire lug kit is installed.
Ratings
•
•
•
24 Vdc High – fuse has opened
•
Includes 0.110” (2.8 mm) quick connects for power, signal and
ground connections
Installation technique
•
Mounts on the left side ONLY of the CCP2 and mechanically
interlocks with the CCP2 switch handle with hardware provided.
The CCP2-PLC-IND CANNOT be mounted on the left front/
left side rotary operated versions or if the multi-wire lug kit is
installed.
IP20 rating — yes
Storage and operating temperature
•
Output signals
• Digital 0 Vdc (low), 24 Vdc max (high)
0 Vdc Low – fuse is good
The CCP2-PLC-IND is packaged individually
-20°C to 75°C (-4°F to 167°F)
PLC programming
+24 Vdc, 10 mA max
•
•
•
Signal output to PLC*
•
For power, signal and ground connections use shielded twisted
pair 22-24 AWG (0.34-0.25 mm2) 300 V rated wire
* When the fuse opens, the output signal is sent high and will remain high until
the unit is reset.
The CCP2-PLC-IND signal line is designed to provide a digital
input to a PLC I/O card. In this case, a Programmable Logic
Control program must be written to properly interpret the input
signal to the PLC. The PLC program should check for consecutive
high signals before taking action on a critical process.
Installed on a CCP2-3-xx
Emissions and immunity testing
•
IEC 60947-1: Voltage Switchgear and Control Gear
•
IEC 61000-6-2: Electromagnetic Compatibility (EMC)
• IEC 61000-4-2: Electrostatic Discharge Immunity - Test at level
3 (6 kV-Contact Discharge) and level 2 (4 kV-Air Discharge)
•
IEC 61000-4-3: Electromagnetic Compatibility - Radiated, Radiofrequency, Electromagnetic Field Immunity test at level x
(20 V/m)
•
IEC 61000-4-4: Electromagnetic Compatibility - Testing and
Measurement Techniques at level 3 (± 2 kV - Power Port and
±1 kV - I/O Ports)
•
IEC 61000-4-5: Electromagnetic Compatibility - Surge Immunity
test at level 4 (±4 kV)
•
IEC 61000-4-6: Immunity to Conducted Disturbances at level 3 (10 V)
Description
Wired remote fuse
indication for PLC
applications
Max per
CCP2**
Signal output
to PLC
Min. circuit
volts
1 per CCP2
(1, 2- or 3-pole)
24 Vdc/ 10 mA
100 Vac
CCP2-PLC-IND mounted on a 3-pole switch and using the fork
terminals. When mounted on a 2- or 1-pole switch, remove unused
leads.
Note: The CCP2-PLC-IND CANNOT be mounted on the left front/left
side rotary operated versions or if the multi-wire lug kit is installed.
** The CCP2-PLC-IND CANNOT be mounted on the left front/left side rotary
operated versions or if the multi-wire lug kit is installed.
De-energize all circuits and follow all prescribed safety procedures before installing
or removing the CCP2-PLC-IND.
Agency information
•
UL 98 Recognized, Guide WHTY2, File E155130
•
cURus to Canadian, Standard 22.2 No. 4-04
Local indication
•
Two distinct LEDs indicate unit power (green) and open fuse (red).
Open fuse LED is resettable upon fuse replacement and actuating
the reset switch.
11-46
CCP2-PLC-IND fuse monitor mounted on a right front rotary
operated switch.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
PLC wiring schematic
PLC fuse monitor
Circuit monitoring leads from
CCP2-PLC-IND to CCP2
(100 – 600 Vac)
+24 Vdc
+24 Vdc
0 Vdc/Gnd
0 Vdc/Gnd
Signal
10 mA max.
Circuit monitoring
leads from PLC or
remote monitoring
device.
The PLC fuse monitor needs
to be powered by the same
+24 Vdc and ground
(0 Vdc/Gnd return)
terminals that feed the
PLC input card.
Disconnect
switches
PLC power supply
CCP2-PLC-IND connections from a CCP2-3-xx to a remote
monitoring device
If it is not, it may
improperly signal.
If feeding multiple
PLC fuse monitors from
different power supplies,
there must be multiple
input cards being powered
by those same power
supplies as well.
+24 Vdc
0 Vdc/Gnd
PLC
input card
Connection from CCP2-PLC-IND to CCP2-3-xx
Lead from CCP2-PLC-IND
Power lead
Leads from CCP2-PLC-IND are connected to the fork terminals as
shown.
Note: When monitoring a 1- or 2-pole switch, remove unused leads.
Dimensions — in
2T
1
SIG
GND
Pin interlocks with
CCP2 switch handle
4T
2
3L
2
1.9
3
3
6T
5L
2.6
+24vDC
+24vDC
RESET
STATUS
1L
1
ON
1.8
3.7
0.3
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-47
11 — Disconnect switches
Class CC and UL Supplemental (IEC 10x38) clockwise rotary switches
For a complete assembly, select from the following required and optional components, and accessories.
Catalog no.
Switches
Amps
Poles
Right front rotary
CCP2R-2-30CC
2
CCP2R-3-30CC
3
30
CCP2R-2-30M
2
CCP2R-3-30M
3
Left front rotary
CCP2RL-2-30CC
2
CCP2RL-3-30CC
3
30
CCP2RL-2-30M
2
CCP2RL-3-30M
3
Right side rotary
CCP2S-2-30CC
2
CCP2S-3-30CC
3
30
CCP2S-2-30M
2
Required
CCP2S-3-30M
3
And
Rotary handles
Description
NEMA rating
CCP2-H4X-B1
Selector handle — black/grey
CCP2-H4X-R1
Selector handle — red/yellow
4X
CCP2-H4X-B2
Pistol handle — black/grey
CCP2-H4X-R2
Pistol handle — red/yellow
And
Shafts (8 mm)
Length
CCP2-SH1-290
290 mm
CCP2-SH1-490
490 mm
NFPA 79 compliant
handle
Color
CCP2-NFPA-1
Red
Optional
And
11-48
Lug kits
Description
CCP2-MW1-3
3-port multi-wire, 75°C Cu/Al, 6-14, includes terminal shrouds, pack of 3
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Accessories
Description
CCP2-TS1-3
Pack of 3
Auxiliary contacts
Description — cannot be used on right front or right side operated switches
CCP2-AUX
NO + NC, 5 A / 240 V
PLC fuse monitor
Description — Cannot be used on left front operated switches
CCP2-PLC-IND
Signal output 24 Vdc / 10 mA
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-49
Disconnect
switches
And
Terminal shrouds
11 — Disconnect switches
Class CC and UL Supplemental (IEC 10x38) Switches
For a complete assembly, select from the following required and optional components, and accessories.
Catalog no.
Switches
Amps
Poles
Required
Switch
CCP2-1-30CC
1
CCP2-2-30CC
2
CCP2-3-30CC
30
CCP2-1-30M
CCP2-2-30M
3
1
2
CCP2-3-30M
3
Optional
And
Lug kits
Description
CCP2-MW1-3
3-port multi-wire, 75°C Cu/Al, 6-14, includes terminal shrouds, pack of 3
Terminal shrouds
Description
CCP2-TS1-3
Pack of 3
Auxiliary contacts
Description
CCP2-AUX
NO + NC, 5 A / 240 V
PLC fuse monitor
Description
CCP2-PLC-IND
Signal output 24 Vdc / 10 mA
Accessories
And
11-50
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Class CC and UL Supplemental (IEC 10x38) counterclockwise switches
For a complete assembly, select from the following required and optional components, and accessories.
Catalog no.
Switches
Amps
Poles
Left side rotary
CCP2SL-2-30CC
2
3
30
CCP2SL-2-30M
Disconnect
switches
CCP2SL-3-30CC
2
CCP2SL-2-30M
2
Required
And
Rotary handles
Description
NEMA rating
CCP2-H4X-B1L
Selector handle — black/grey
CCP2-H4X-R1L
Selector handle — red/yellow
4X
CCP2-H4X-B2L
Pistol handle — black/grey
CCP2-H4X-R2L
Pistol handle — red/yellow
And
Shafts (8 mm)
Length
CCP2-SH1-290
290 mm
CCP2-SH1-490
490 mm
Optional
And
Lug kits
Description
CCP2-MW1-3
3-port multi-wire, 75°C Cu/Al, 6-14, includes terminal shrouds, pack of 3
Terminal shrouds
Description
CCP2-TS1-3
Pack of 3
Auxiliary contacts
Description —mounts on right side
CCP2-AUX
NO + NC, 5 A / 240 V
Accessories
And
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-51
11 — Disconnect switches
CCPLP UL 98 Listed low profile Compact Circuit
Protector
The revolutionary Bussmann
series low profile Compact
Circuit Protector (CCPLP) is a UL
98/508 Listed fused disconnect
switch. This front panel mount
switch is available in 1-, 2- and
3-pole versions, and has the
smallest footprint of any fused
disconnect switch. It features
an SCCR up to 200 kA to help
improve equipment SCCR.
2011/65/EU
Poles
1-, 2- and 3-pole factory configured*
* 2- and 3-pole versions supplied as ganged switches with phase barriers.
Agency information
•
•
Four fuse types
The CCPLP is available for UL Class CC and G, UL supplemental
(13/32” x 1-1/2”) and IEC 10x38 mm fuses.
•
Class CC and G versions are easily selectively coordinated with
the upstream Bussmann series CUBEFuse™ using published fuse
ampacity ratio tables.
Class G fuse versions
•
UL 98 Listed, Guide WHTY, File E302370
•
IEC 60947-3 AC-23A
Class CC fuse versions
•
UL 98 Listed, Guide WHTY, File E302370
•
cULus to Canadian Standard 22.2 No. 4-04, Guide WHTY7,
File E302370
•
IEC 60947-3 AC-23A
UL supplemental and IEC 10x38mm fuse versions
•
UL 508 Listed, Guide NRNT, File E320230
•
cULus Listed to Canadian Standard 22.2 No. 14-05, Guide
NRNT7,
File E320230
•
IEC 60947-3 AC-23A
Design/application flexibility
The CCPLP is easily integrated into many panel designs and provides
a high SCCR alternative to low profile circuit breakers on the market.
Ratings
•
•
•
•
600 Vac (Class CC up to 30 A, Class G 20 A)
•
550 Vac (10x38mm IEC Class aM 0.16-16 A)
•
500 Vac (10x38mm IEC Class gG 0.5-25 A)
•
400 Vac (10x38mm IEC Class aM 20-32 A, gG 32 A)
•
240 Vac (13/32” x 1-1/2” UL supplemental 30 A)
Amps
Up to 30 A (UL)
•
Up to 32 A (IEC)
RoHS compliant
•
CE
Safety
Volts
•
•
•
Finger-safe IP20 from panel front
Mounting
•
Front panel mounting with customer supplied M3 screws
Open fuse indication*
•
Local open fuse indication provided for each pole by an orange
neon lamp (minimum 90 V)
* Open fuse indication requires an energized, closed circuit with an open fuse in
the CCPLP and the switch in the ON position.
SCCR
•
200 kA (Class CC)
•
120 kA (10x38mm IEC Class gG and aM)
•
100 kA (Class G)
•
10 kA (13/32” x 1-1/2” UL supplemental)
•
Frequency 50/60 Hz
•
Impulse voltage 8 kV
Terminals and conductors 75°C/90°C Cu
Lockout/tagout provision
•
Circuit labeling provision
•
Screw terminal, 10-32 phil-slot screw with external tooth lock
washer (use with properly rated/UL Listed ring or fork terminal)
•
Pressure plate terminal, 10-32 phil-slot screw (single 22-6 AWG
solid or stranded)
Accepts up to two universal marker labels, catalog number
TM26CB
Carton quantity
•
•
Brady pin-out device, part number 90844
12 poles (1-pole: 12 units, 2-pole: 6 units, 3-pole: 4 units)
Minimum enclosure size
•
6” x 6” x 4” per UL 98 Listing
Ambient storage and operating temperature
•
-20 to 90°C, 85% relative humidity, non-condensing
Data sheet no.10372
11-52
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
Available CCPLP versions
Horsepower (Vac)
240
480
600
Poles
Volts AC
Amps
SCCR
(kA)
CCPLP-1-20G-P
CCPLP-2-20G-P
CCPLP-3-20G-P
1
2
3
600
20
100
—
—
—
—
—
—
—
—
—
—
—
—
CCPLP-1-30CC-P
CCPLP-2-30CC-P
CCPLP-3-30CC-P
fuses
CCPLP-1-30M-P
1
2
3
600
30
200
0.5
—
—
—
2
3
—
—
4
—
—
7. 5
—
—
—
—
CCPLP-2-30M-P
2
240
30
10
—
—
—
—
CCPLP-3-30M-S
CCPLP-3-30M-P
IEC 10x38 gG and aM fuses
3
—
—
—
—
CCPLP-1-30M-S
CCPLP-1-30M-P
1
120
—
—
—
—
CCPLP-2-30M-S
CCPLP-2-30M-P
2
120
—
—
—
—
CCPLP-3-30M-S
CCPLP-3-30M-P
3
120
—
—
—
—
CCPLP-2-30M-S
Pressure plate terminal
1
gG fuses:
up to 25 A @ 500 V
32 A @ 400 V
aM fuses:
up to 16 A @ 550 A
20-23 A @ 400V
120
Switch handle (ganged on 2- and 3-pole versions)
Fuse access door
Open fuse indicating light
Mounting holes for customer
supplied M3 screws
Lockout/tagout provision*
Circuit marking area
Phase barrier
10/32 phil-slot screw or
pressure plate terminal
* Use Brady pin-out device, P/N 90844
Available Bussmann series fuses
Fuse class
Catalog symbol
CC
FNQ-R, KTK-R, LP-CC
G
SC
M
BAF, FNM, FNQ, KLM, KTK
gG
C10G
aM
C10M
Data sheet no.10372
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-53
Disconnect
switches
Catalog no.
Screw terminal
UL Class G fuse
CCPLP-1-20G-S
CCPLP-2-20G-S
CCPLP-3-20G-S
UL Class CC fuses
CCPLP-1-30CC-S
CCPLP-2-30CC-S
CCPLP-3-30CC-S
UL 13/32”x1-1/2” midget
CCPLP-1-30M-S
11 — Disconnect switches
UL 98 fused disconnect switches up to 800 A
Bussmann series UL 98 and UL 489 fused disconnect switches
“break” and “make” power circuits ON and OFF load.
The switches employ double break contacts per pole that help
ensure complete isolation of the fuse when the switch is in the
"OFF" position.
Agency information
•
UL 98, Guide WHTY, File E155130
•
UL 489, Guide WJAZ, File E359801
•
CSA 22.2 No. 4, File 257020
•
Conforms with IEC 60947-3
•
NFPA 79
Features
•
Make and break power under load
•
Double break by pole
•
30-60 A DIN-Rail or panel mount, 100-800 A panel mount only
•
Up to 200 kA short-circuit current rating
•
Finger-safe covers
•
Compact footprints available
•
Defeatable handles automatically re-latch when the panel door is
closed
•
Most disconnect switches are front, right side, flange or direct
handle operable
•
NFPA 79 compliant handle kits
Online resources available at Eaton.com/bussmannseries
•
CAD drawings
•
Instruction sheets
•
UL information
Available Bussmann series fuses
Fuse class
CC
J
L
11-54
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Catalog symbol/type
LP-CC time-delay, current limiting
FNQ-R time-delay
KTK-R fast-acting
LPJ time-delay, current limiting
JKS fast-acting fuses
DFJ high speed drive fuse
KRP-C time-delay, current limiting
KTU fast-acting
KLU time-delay
KRP-CL (225-600 A)
Eaton.com/bussmannseries
Disconnect switches — 11
UL 98 fused disconnect switches — 30 to 800 A
Poles
2-pole
—
—
RDF30J-3RDF30CC-3
COMP
RDF30J-3NRDF30CC-3N
COMP
—
—
UL 489
UL 489
CC
J
30
30
Compact
Compact
3-pole
3-pole + neutral
4-pole
UL standard
Fuse class
Max fuse/ampacity
Switch type
Handle operation
UL electrical ratings
Max AC volts
Max DC volts*
1-phase, 240
3-phase, 240
Std. AC Hp
ratings
3-phase, 480
3-phase, 600
3-phase, 240
Max. AC Hp
3-phase, 480
ratings
3-phase, 600
125 Vdc
DC Hp ratings
250 Vdc
Electrical characteristics
SCCR
Terminal lugs/kits
Mounting torque - lb-in (N•m)
Wire type
Wire range,
torque - lb-in
(N•m)
Solid
Stranded
Mechanical characteristics
Endurances/cycles
Physical characteristics
Dimensions
2-pole
3-pole
Weight - lbs
3-pole +
(kg)
neutral
4-pole
Environmental
Operating temp. range
Flammability rating
Accessories
Lug Kit
Direct
Front
selector
Handles
Front pistol
Side pistol
Cable
Flange
Shaft
NFPA through door handle
Shafts c/s - mm
Terminal shrouds
Auxiliary
contacts
AC ratings
RDF30J-3 / RDF60J-3-COMP
(1) NO
(1) NC
Volts
Amps
RDF60J-3
RDF200J-3
RDF600J-3
RDF30J-2
RDF60J-2-COMP
Catalog no.
RDF60J-2 RDF100J-2
RDF200J-2
RDF400J-2
RDF600J-2
RDF800L-2
RDF30J-3
RDF60J-3-COMP
RDF60J-3
RDF200J-3
RDF400J-3
RDF600J-3
RDF800L-3
RDF100J-3
—
—
—
—
—
—
—
—
RDF30J-4
UL 98
J
30
Standard
RDF60J-4-COMP
UL 98
J
60
Compact
RDF60J-4
UL 98
J
60
Standard
RDF100J-4
UL 98
J
100
Standard
Front/Side ,
Flange
RDF200J-4
UL 98
J
200
Standard
Front/Side ,
Flange
RDF400J-4
UL 98
J
400
Standard
Front/Side ,
Flange
RDF600J-4
UL 98
J
600
Standard
RDF800L-4
UL 98
L
800
Standard
Front
Front
Front/Side
Front/Side
Front/Side
600 Vac
—
—
3
5.0
7.5
7.5
15
20
—
—
600 Vac
—
—
3
5.0
7.5
7.5
15
20
—
—
600 Vac
250 Vdc
3
3
5.0
7.5
7.5
15
20
3
5
600 Vac
250 Vdc
10
7.5
15
15
15
30
50
5
10
600 Vac
250 Vdc
10
7.5
15
15
15
30
50
5
10
600 Vac
250 Vdc
10
15
25
30
30
60
75
7.5
20
600 Vac
—
10
25
50
60
60
125
150
—
—
600 Vac
250 Vdc
10
50
100
125
125
250
350
20
50
600 Vac
600 Vdc
—
75
150
200
200
400
500
—
—
600 Vac
600 Vdc
—
75
200
250
200
500
500
—
—
100 kA
Integral
—
75°C Cu
14-10, 27
100 kA
Integral
—
75°C Cu
14-10, 27
200 kA
Integral
—
75°C Cu
14-10, 31
100 kA
Integral
—
75°C Cu
200 kA
Integral
—
75°C Cu
12-10, 35.4
200 kA
Integral
—
75°C Cu
12-10, 35.4
200 kA
•
160 (18)
75°C Cu/ Al
200 kA
•
310 (35)
75°C Cu/ Al
200 kA
•
310 (35)
75°C Cu/ Al
200 kA
•
310 (35)
75°C Cu/ Al
—
—
—
(3.1)
14-10 27
(3.1)
(3.5)
14-10, 31 (3.5)
(4)
12-1, 35.4
Front , Flange Front , Flange
(4)
—
12-1, 35.4 (4)
6-300 kcmil,
275 (31)
550 (62),
Dual 1/0-250
kcmil 550 (62)
(2) 2-600
kcmil, 375
(2) 2-600
kcmil, 375
10,000
8000
6000
5000
5000
11.4 (5.2)
16.6 (7.6)
31.7 (14.4)
44.2 (20.1)
31.7 (14.4)
44.2 (20.1)
4-600 kcmil,
14-10 27 (3.1)
14-6 , 31
(3.5)
14-6, 31 (3.5)
10,000
10,000
10,000
10,000
—
1.3 (0.6)
—
1.4 (0.6)
3.0 (1.3)
3.8 (1.7)
3.1 (1.4)
4.1 (1.8)
1.4 (0.6)
1.5 (0.7)
—
—
—
—
—
—
—
—
—
—
4.7 (2.1)
4.8 (2.2)
6.49 (2.9)
6.49 (2.9)
10.8 (4.9)
21.8 (9.9)
56.8 (25.8)
56.8 (25.8)
-20-70°C
UL 94-V0
-20-70°C
UL 94-V0
-20-70°C
UL 94-V0
-20-70°C
UL 94-V0
-20-70°C
UL 94-V0
-20-70°C
UL 94-V0
-20-70°C
UL 94-V0
-20-70°C
UL 94-V0
-20-70°C
UL 94-V0
-20-70°C
UL 94-V0
Integral
•
Integral
•
Integral
•
Integral
•
Integral
•
Integral
•
•
•
•
•
•
•
•
•
•
•
—
—
—
—
—
—
—
—
•
—
—
—
•
5x5
Not
Required
•
•
600
10
•
—
—
—
•
5x5
Not
Required
•
•
600
10
•
•
•
•
•
10x10
Not
Required
•
•
600
10
•
•
•
•
•
10x10
•
•
•
•
•
10x10
Not
Required
•
•
600
10
•
•
•
•
•
10x10
Not
Required
•
•
600
10
•
•
•
•
•
10x10
•
•
—
—
•
10x10
•
—
—
—
•
12X12
•
—
—
—
•
12X12
(3.1)
10,000
See drawings on product pages
4.1 (1.8)
4.1 (1.8)
5.7 (2.6)
5.3 (2.4)
5.3 (2.4)
7.8 (3.5)
Not Required
•
•
600
10
(4)
(42.4)
(42.4)
•
•
•
•
•
•
600
10
•
•
600
10
•
•
600
10
•
•
600
10
• Available, see product page for details and catalog numbers.
— Not available.
* General purpose only, not photovoltaic rated.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-55
Disconnect
switches
RDF30CC-3
11 — Disconnect switches
UL 98 fused rotary disconnect switches — 30 A
Standard 30 amp Class CC and compact 30 amp Class J
For a complete assembly, select:
Switch
Switch
Fuse
Amps
class
Poles
30
3
CC
30
3 + Ntrl.*
30
3
J
30
3 + Ntrl.*
* Neutral is switched.
SCCR
(kA)
100
100
100
100
Max Hp rating, 3-phase
220/240 440/480 600
7.5
15
20
7.5
15
20
7.5
15
20
7.5
15
20
Conductor
AWG size /type
14-10 Sol/Str
75°C Cu
Plus
Direct mount handle - mounts directly to switch, no shaft required
For switch cat. no.
Color
Test function
Padlockable
Catalog no.
RDF30CC-_
DIR-05
Black
Y
Y
RDF30J-_-COMP
Handle
Select for standard applications
+
or
DIR-06
OR
External front operated selector handle - shaft required
NEMA type
Color
Test function
Padlockable
Defeatable
1, 3R, 4, 4X, 12
Black
N
Y
Y
1, 3R, 4, 4X, 12
Red/yellow
Shafts for selector handles
Length - in (mm)
Mounting depth (X) - in (mm)
7.9 (200)
4.02~9.65 (102~245)
12.6 (320)
4.02~14.37 (102~365)
15.7 (400)
4.02~17.52 (102~445)
OR
External front operated pistol handles - shaft required
NEMA type
Color
Test function
Padlockable
Defeatable
1, 3R, 12
Black
1, 3R, 12
Red/yellow
N
1, 3R, 4, 4X, 12
Black
Y
Y
1, 3R, 4, 4X, 12
Red/yellow
1, 3R, 4, 4X, 12
Black
Y
1, 3R, 4, 4X, 12
Red/yellow
Metallic hasp (heavy duty) external front operated pistol handles - shaft required
NEMA type
Color
Test function
Padlockable
Defeatable
Catalog no.
1, 3R, 4, 4X, 12
Black
H4X-05BHD
1, 3R, 4, 4X, 12
Red/yellow
N
+
Catalog no.
RDF30CC-3
RDF30CC-3N
RDF30J-3-COMP
RDF30J-3N-COMP
Y
Catalog no.
SH1-200
SH1-320
SH1-400
Catalog no.
H12-05B
H12-05R
H4X-05B
H4X-05R
H4X-05TB
H4X-05TR
Y
H4X-05RHD
Shafts for pistol handles
Length - in (mm)
Mounting depth (X) - in (mm)
7.9 (200)
4.02~9.65 (102~245)
12.6 (320)
4.02~14.37 (102~365)
15.7 (400)
4.02~17.52 (102~445)
Catalog no.
SH2-200
SH2-320
SH2-400
OR
NFPA through the door handle kit - to be used with front pistol handle
Color
Test function
Padlockable
Red
Catalog no.
H4X-04B
H4X-04R
N
Y
Defeatable
N
Catalog no.
H79-1
Auxiliary contacts
Accessories
AND...
11-56
Auxiliary contacts
Contact
No. of Continuous
type
contacts amp rating
NO
1
10
NC
1
2
Voltage (Vac)
600
Auxiliary contact holder
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Maximum number of auxiliary contacts per
disconnect switch catalog number
Catalog no.
RDF30CC-_: 4 / 8 with BAC-HOLDER2
BAC05 (1)
BAC05 (1) RDF30J-_-COMP: 2 /6 with BACBAC06 (1)
HOLDER2
Accepts 4 Auxiliary contacts: BAC05 or
BAC06
BAC-HOLDER2 (2)
Eaton.com/bussmannseries
Disconnect switches — 11
Dimensions — in (mm)
RDF30CC-_
3.78
96 1.47
37.5
1.12
28.5
0.59
15
Disconnect
switches
3.3
84
4.56
116
1
25.5
3.28
83.3
5.19 (131.8)
Fuse Cover Fully Open
RDF30J-_-COMP
4.13
105
0.59
15
1.47
37.5
1
25.5
1.12
28.5
3.3
84
4.56
116
3.89
99
External front selector handle
Direction of front operation
Door drilling layout
1.57
40
I
9
H4X-04_
0.11
3
4 Ø 0.27
4Ø7
0
1.10
28
3.46
88
Ø3.07
Ø78
0°
1.45
37
Ø 1.22
Ø 31
0.53
13.5
Selector handle type
With 4 Mounting Screws
Ø 0.88
Ø 22.5
With mounting nut
External front pistol handles
Pistol handle type
Direction of front operation
Door drilling layout
I
1.73
44
0.78
20
0
TEST
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
0.78
20
H4X-05__
H12-05__
Ø 1.46
Ø 37
4 Ø 0.27
4Ø7
65°
2.75
70
90
°
Ø3.07
Ø78
0.55
14
0.55
14
Eaton.com/bussmannseries
11-57
11 — Disconnect switches
Standard 30 amp Class J
For a complete assembly, select:
Switch
SCCR
(kA)
Poles
2
30
J
3
200
4
* DC ratings use two poles in series.
Switch
Amps
Fuse
class
Max horsepower rating
1-phase
3-phase
220/240 220/240 440/480 600
3
7.5
15
20
7.5
15
20
PLUS
Direct mount handle - mounts directly to switch, no shaft required
For switch cat. no.
Color
Test function
Or
+
Handle
Select for standard applications
All switches
2
1
3
4
Black
Y
DC*
125
250
3
5
3
5
3
5
Conductors
AWG size / type
14-10 Sol/14-6 Str
75°C Cu
Padlockable
Catalog no.
Y - On switch
DIR-07
OR
External front operated pistol handles - shaft required
NEMA type
Color
Test function
Padlockable
Defeatable
Black
1, 3R, 12
Red/yellow
N
Black
Y
Y
Red/yellow
1, 3R, 4, 4X, 12
Black
Y
Red/yellow
Metallic hasp (heavy duty) external front operated pistol handles - shaft required
NEMA
Color
Color
Test function
Padlockable
Defeatable
type
Black
1, 3R, 4, 4X, 12
N
Y
Y
Red/yellow
External right side operated pistol handles - shaft required
NEMA type
Color
Test function
Padlockable
Defeatable
Black
1, 3R, 4, 4X, 12
N
Y
N/A
Red/yellow
Shafts for pistol handles
Length — in (mm) Mounting depth (X) — in (mm)
7.9 (200)
5.30~9.06 (135~230)
12.6 (320)
5.30~13.78 (135~350)
15.7 (400)
5.30~16.93 (135~430)
OR
Flange handle (1) - requires shaft operated mechanism or cable operated mechanism + cable
NEMA type
Flange style
Test function
Padlockable
Defeatable
1, 3R, 4, 12
Standard
N
Y
Y
1, 3R, 4, 4X, 12
Chrome plated
Shaft operated flange mechanism (2) - includes shaft
For enclosure depth - in (mm)
6~24 (152~613)
Cable operated flange mechanism and cable - must select mechanism (3) and cable (4)
Item / length — in (mm)
Cable mechanism
36 (900) cable
60 (1500) cable
120 (3000) cable
OR
NFPA through the door handle kit - to be used with front pistol handle
Color
Test function
Padlockable
Defeatable
Red
N
Catalog no.
RDF30J-2
RDF30J-3
RDF30J-4
Y
N
Catalog no.
H12-05B
H12-05R
H4X-05B
H4X-05R
H4X-05TB
H4X-05TR
Catalog no.
H4X-05BHD
H4X-05RHD
Catalog no.
H4X-05SB
H4X-05SR
Catalog no.
SH5-200
SH5-320
SH5-400
Catalog no.
FLH1
FLH2
Catalog no.
FLRM
Catalog no.
FLCM
FLC36
FLC60
FLC120
Catalog no.
H79-2
Aux. contacts
Accessories
AND...
11-58
Auxiliary contacts
Contact
No. of contacts
type
Continuous amp rating
Voltage (Vac)
Max. aux contacts per switch
10
600
4
NO
Catalog no.
BAC05
1
NC
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
BAC06
Eaton.com/bussmannseries
Disconnect switches — 11
Dimensions — in (mm)
5.87
149.3
1.41
36
1.46
37.2
4.84
123
Disconnect
switches
4.02
102.1
5.35
136
2.68
68.07
1.41
36
Direct mount handle
1.79
45.5
5.31
135
1.57
40
DIR-07
Flange handle
3.50
(88.9)
Ø0.28
(Ø7.1)
Ø0.50
1.55
(39.4)
(Ø12.7)
2.16
(54.9)
1.06
(26.9)
0.86
(21.8)
5.66
(143.8)
6.22
(158.0)
4.68
(118.9)
1.00
(25.4)
1.00 0.88
(25.4) (22.3)
7.10
(180.3)
2.32
(58.9)
2.70
(68.6)
FLH_
External front and right side pistol handle
Direction of front operation Direction of right side operation Door drilling layout
I
I
90
0
TEST
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
0.78
20
1.73
44
0
Ø 1.46
Ø 37
4 Ø 0.27
4Ø7
65°
2.75
70
H4X-05__
H12-05__
°
90
°
Ø3.07
Ø78
0.78
20
Handle type
0.55
14
0.55
14
Eaton.com/bussmannseries
11-59
11 — Disconnect switches
Compact 60 amp Class J
For a complete assembly, select:
Switch
SCCR
(kA)
Poles
2
60
J
3
100
4
* DC ratings use two poles in series.
Switch
Amps
Fuse
class
Max horsepower
3-phase
220/240 440/480
15
30
15
30
1-phase
220/240
10
-
rating
600
50
50
PLUS
Direct mount handle - mounts directly to switch, no shaft required
For switch cat. no.
Color
Test function
Or
+
Handle
Select for standard applications
All switches
2
1
3
4
Black
Y
125
5
5
5
DC*
250
10
10
10
Conductor
AWG size / type
14-10 Sol/14-6 Str
75°C Cu
Padlockable
Catalog no.
Y - on switch
DIR-07
OR
External front operated pistol handles - shaft required
NEMA type
Color
Test function
Padlockable
Defeatable
1, 3R, 12
Black
1, 3R, 12
Red/yellow
N
1, 3R, 4, 4X, 12
Black
Y
Y
1, 3R, 4, 4X, 12
Red/yellow
1, 3R, 4, 4X, 12
Black
Y
1, 3R, 4, 4X, 12
Red/yellow
Metallic hasp (heavy duty) external front operated pistol handles - shaft required
NEMA type
Color
Test function
Padlockable
Defeatable
1, 3R, 4, 4X, 12
Black
N
Y
Y
1, 3R, 4, 4X, 12
Red/yellow
External right side operated pistol handles - shaft required
NEMA type
Color
Test function
Padlockable
Defeatable
1, 3R, 4, 4X, 12
Black
N
Y
N/A
1, 3R, 4, 4X, 12
Red/yellow
Shafts for pistol handles
Length — in (mm) Mounting depth (X) - in (mm)
7.9 (200)
5.30~9.06 (135~230)
12.6 (320)
5.30~13.78 (135~350)
15.7 (400)
5.30~16.93 (135~430)
OR
Flange handle (1) - requires shaft operated mechanism or cable operated mechanism + cable
NEMA type
Flange style
Test function
Padlockable
Defeatable
1, 3R, 4, 12
Standard
N
Y
Y
1, 3R, 4, 4X, 12
Chrome plated
Shaft operated flange mechanism (2) - includes shaft
For enclosure depth - in (mm)
6~24 (152~613)
Cable operated flange mechanism and cable - must select mechanism (3) and cable (4)
Item / length — in (mm)
Cable mechanism
36 (900) cable
60 (1500) cable
120 (3000) cable
OR
NFPA through the door handle kit - to be used with selector handle or front pistol handle
Color
Test function
Padlockable
Defeatable
Red
N
Catalog no.
RDF60J-2-COMP
RDF60J-3-COMP
RDF60J-4-COMP
Y
N
Catalog no.
H12-05B
H12-05R
H4X-05B
H4X-05R
H4X-05TB
H4X-05TR
Catalog no.
H4X-05BHD
H4X-05RHD
Catalog no.
H4X-05SB
H4X-05SR
Catalog no.
SH5-200
SH5-320
SH5-400
Catalog no.
FLH1
FLH2
Catalog no.
FLRM
Catalog no.
FLCM
FLC36
FLC60
FLC120
Catalog no.
H79-2
AND...
Aux. contacts
Accessories
Auxiliary contacts
11-60
Contact type
No. of contacts
Continuous amp
rating
Voltage (Vac)
Max. aux contacts per switch
1
10
600
4
NO
Catalog no.
BAC05
NC
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
BAC06
Eaton.com/bussmannseries
Disconnect switches — 11
Dimensions — in (mm)
3.89
99
4.13
105
1.47
37.5
0.59
15
3.3
84
Disconnect
switches
4.56
116
1
25.5
1.12
28.5
Direct mount handle
1.79
45.5
5.31
135
1.57
40
DIR-07
Flange handle
3.50
(88.9)
Ø0.28
(Ø7.1)
Ø0.50
1.55
(39.4)
(Ø12.7)
2.16
(54.9)
1.06
(26.9)
0.86
(21.8)
5.66
(143.8)
6.22
(158.0)
4.68
(118.9)
1.00
(25.4)
1.00 0.88
(25.4) (22.3)
7.10
(180.3)
2.32
(58.9)
2.70
(68.6)
FLH_
External front and right side pistol handle
Direction of front operation Direction of right side operation Door drilling layout
I
I
0.78
20
90
1.73
44
0
Ø 1.46
Ø 37
4 Ø 0.27
4Ø7
0
65°
2.75
70
H4X-05__
H12-05__
°
90
°
Ø3.07
Ø78
TEST
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
0.78
20
Handle type
0.55
14
0.55
14
Eaton.com/bussmannseries
11-61
11 — Disconnect switches
Standard 60 amp Class J
For a complete assembly, select:
Switch
Max horsepower
3-phase
220/240 440/480
15
30
15
30
1-phase
SCCR
Amps
Poles
(kA)
220/240
2
200
10
60
J
3
200
4
200
* DC ratings use two poles in series.
Switch
Fuse
class
rating
600
50
50
PLUS
Direct mount handle - mounts directly to switch, no shaft required
For switch cat. no.
Color
Test function
Or
Black
Y
Conductor AWG
size/type
Catalog no.
RDF60J-2
12-10 Sol/12-1 Str
RDF60J-3
75°C Cu
RDF60J-4
Padlockable
Catalog no.
Y
OR
External front operated pistol handles - shaft required
NEMA type
Color
Test function
Padlockable
1, 3R, 12
Black
1, 3R, 12
Red/yellow
N
1, 3R, 4, 4X, 12
Black
Y
1, 3R, 4, 4X, 12
Red/yellow
1, 3R, 4, 4X, 12
Black
Y
1, 3R, 4, 4X, 12
Red/yellow
Metallic hasp (heavy duty) external front operated pistol handles - shaft required
NEMA type
Color
Test function
Padlockable
1, 3R, 4, 4X, 12
Black
N
Y
1, 3R, 4, 4X, 12
Red/yellow
DIR-07
Defeatable
Y
Defeatable
Y
Catalog no.
H12-03B
H12-03R
H4X-06B
H4X-06R
H4X-06TB
H4X-06TR
Catalog no.
H4X-06BHD
H4X-06RHD
External right side operated pistol handles - shaft required
Handle
Select for standard applications
All switches
DC*
125
250
5
10
5
10
5
10
+
2
1
3
4
NEMA type
Color
1, 3R, 4, 4X, 12
Black
1, 3R, 4, 4X, 12
Red/yellow
Shafts for pistol handles
Length — in (mm) Mounting depth (X) — in (mm)
7.9 (200)
5.30~9.06 (135~230)
12.6 (320)
5.30~13.78 (135~350)
15.7 (400)
5.30~16.93 (135~430)
Test function
Padlockable
Defeatable
N
Y
N/A
Catalog no.
SH5-200
SH5-320
SH5-400
OR
Flange handle (1) - requires shaft operated mechanism or cable operated mechanism + cable
NEMA type
Flange style
Test Function
Padlockable
Defeatable
1, 3R, 4, 12
Standard
N
Y
Y
1, 3R, 4, 4X, 12
Chrome plated
Shaft operated flange mechanism (2) - includes shaft
For enclosure depth — in (mm)
6~24 (152~613)
Cable operated flange mechanism and cable - must select mechanism (3) and cable (4)
Item / length — in (mm)
Cable mechanism
36 (900) cable
60 (1500) cable
120 (3000) cable
OR
NFPA through the door handle kit - to be used with front pistol handle
Color
Test function
Padlockable
Defeatable
Red
Catalog no.
H4X-06SB
H4X-06SR
N
Y
N
Catalog no.
FLH1
FLH2
Catalog no.
FLRM
Catalog no.
FLCM
FLC36
FLC60
FLC120
Catalog no.
H79-2
Accessories
Aux. contacts
AND...
11-62
Auxiliary contacts
Contact type
NO
NC
No. of contacts
Continuous amp
rating
Voltage (Vac)
1
10
600
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Max number of aux contacts per
Catalog no.
switch
BAC05
4
BAC06
Eaton.com/bussmannseries
Disconnect switches — 11
Dimensions — in (mm)
4.81
122.2
1.41
36
1.46
37.2
Disconnect
switches
5.23
133
6.77
172
7.32
186
3.66
92.96
5.87
149.3
1.41
36
Direct mount handle
1.79
45.5
5.31
135
1.57
40
DIR-07
Flange handle
3.50
(88.9)
Ø0.28
(Ø7.1)
Ø0.50
1.55
(39.4)
(Ø12.7)
2.16
(54.9)
1.06
(26.9)
0.86
(21.8)
5.66
(143.8)
6.22
(158.0)
4.68
(118.9)
1.00
(25.4)
1.00 0.88
(25.4) (22.3)
7.10
(180.3)
2.32
(58.9)
2.70
(68.6)
FLH_
External front and right side pistol handle
Handle type
Direction of front operation
Direction of right side operation
I
I
Ø3.07
Ø78
°
0
Ø 1.46
Ø 37
4 Ø 0.27
4Ø7
0.78
20
90
°
90
0
1.77
45
TEST
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
0.78
20
65°
4.92
125
H4X-06__
H12-03__
Door drilling layout
0.55
14
0.55
14
Eaton.com/bussmannseries
11-63
11 — Disconnect switches
Standard 100 amp Class J
For a complete assembly, select:
Switch
1-phase
Amps
Poles
220/240
2
10
100
J
3
200
4
* DC ratings use two poles in series.
Switch
Fuse
class
SCCR
(kA)
Max horsepower
3-phase
220/240 440/480
30
60
30
60
rating
600
75
75
PLUS
Direct mount handle - mounts directly to switch, no shaft required
For switch cat.
Color
Test function
no.
Or
+
Handles
Select for standard applications
All switches
2
1
3
4
Black
Y
DC*
125 250
7.5
20
7.5
20
7.5
20
Conductor
AWG size/type
12-10 Sol/12-1 Str
75°C Cu
Padlockable
Catalog no.
Y
DIR-07
OR
External front operated pistol handles - shaft required
NEMA type
Color
Test function Padlockable
Defeatable
Black
1, 3R, 12
Red/yellow
N
Black
Y
Y
Red/yellow
1, 3R, 4, 4X, 12
Black
Y
Red/yellow
Metallic hasp (heavy duty) external front operated pistol handles - shaft required
NEMA type
Color
Test function Padlockable
Defeatable
1, 3R, 4, 4X, 12
Black
N
Y
Y
1, 3R, 4, 4X, 12
Red/yellow
External right side operated pistol handles - shaft required
NEMA type
Color
Test function Padlockable
Defeatable
Black
1, 3R, 4, 4X, 12
N
Y
N/A
Red/yellow
Shafts for pistol handles
Length — in
Mounting depth (X) - in (mm)
(mm)
7.9 (200)
5.30~9.06 (135~230)
12.6 (320)
5.30~13.78 (135~350)
15.7 (400)
5.30~16.93 (135~430)
OR
Flange handle (1) - requires shaft operated mechanism or cable operated mechanism + cable
NEMA type
Flange style
Test function Padlockable
Defeatable
1, 3R, 4, 12
Standard
N
Y
Y
1, 3R, 4, 4X, 12
Chrome plated
Shaft operated flange mechanism (2) - includes shaft
For enclosure depth — in (mm)
6~24 (152~613)
Cable operated flange mechanism and cable - must select mechanism (3) and cable (4)
Item / length — in (mm)
Cable mechanism
36 (900) cable
60 (1500) cable
120 (3000) cable
OR
NFPA through the door handle kit - to be used with front pistol handle
Color
Test function Padlockable
Defeatable
Red
N
Catalog no.
RDF100J-2
RDF100J-3
RDF100J-4
Y
N
Catalog no.
H12-03B
H12-03R
H4X-06B
H4X-06R
H4X-06TB
H4X-06TR
Catalog no.
H4X-06BHD
H4X-06RHD
Catalog no.
H4X-06SB
H4X-06SR
Catalog no.
SH5-200
SH5-320
SH5-400
Catalog no.
FLH1
FLH2
Catalog no.
FLRM
Catalog no.
FLCM
FLC36
FLC60
FLC120
Catalog no.
H79-2
Aux. contacts
Accessories
AND...
11-64
Auxiliary contacts
Contact type
No. of contacts
Continuous amp
rating
Voltage (Vac)
Max number of aux contacts
per switch
NO
NC
Catalog no.
BAC05
1
10
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
600
4
Eaton.com/bussmannseries
BAC06
Disconnect switches — 11
Dimensions — in (mm)
4.81
122.2
1.41
36
1.46
37.2
Disconnect
switches
5.23
133
6.77
172
7.32
186
3.66
92.96
5.87
149.3
1.41
36
Direct mount handle
1.79
45.5
5.31
135
1.57
40
DIR-07
Flange handle
3.50
(88.9)
Ø0.28
(Ø7.1)
Ø0.50
1.55
(39.4)
(Ø12.7)
2.16
(54.9)
1.06
(26.9)
0.86
(21.8)
5.66
(143.8)
6.22
(158.0)
4.68
(118.9)
1.00
(25.4)
1.00 0.88
(25.4) (22.3)
7.10
(180.3)
2.32
(58.9)
2.70
(68.6)
FLH_
External front and right side pistol handle
Handle type
Direction of front operation
Direction of right side operation
I
I
Ø3.07
Ø78
°
0
Ø 1.46
Ø 37
4 Ø 0.27
4Ø7
0.78
20
90
°
90
0
1.77
45
TEST
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
0.78
20
65°
4.92
125
H4X-06__
H12-03__
Door drilling layout
0.55
14
0.55
14
Eaton.com/bussmannseries
11-65
11 — Disconnect switches
Standard 200 and 400 amp Class J
For a complete assembly, select:
Switch
Switch + lugs
Amps
Select for standard applications
+
Handles
Or
+
2
3
4
11-66
SCCR
(kA)
Poles
2
200
3
4
J
200
2
400
3
4
* DC ratings use two poles in series.
Terminal lug kit
Switch amps
Poles
2
200
3
4
2
400
3
4
Max horsepower rating
3-phase
220/240 440/480 600
60
125
150
60
125
150
125
250
350
125
250
350
1-phase
220/240
10
10
-
125
20
20
20
DC*
250
50
50
50
Catalog no.
RDF200J-2
RDF200J-3
RDF200J-4
RDF400J-2
RDF400J-3
RDF400J-4
Lugs per kit
AWG wire / type
2
6-300 kcmil
3
75°C Cu/Al
4
2
4-600 kcmil or dual 1/0-250 kcmil
3
75°C Cu/Al
4
PLUS
Direct mount handle - mounts directly to switch, no shaft required
For switch cat. no.
Color
Test function
Padlockable
Catalog no.
All switches
DIR-07
Black
Y
Y
OR
External front operated pistol handles - shaft required
NEMA type
Color
Test function
Padlockable
Defeatable
Black
1, 3R, 12
Red/yellow
N
Black
Y
Y
Red/yellow
1, 3R, 4, 4X, 12
Black
Y
Red/yellow
Metallic hasp (heavy duty) external front operated pistol handles - shaft required
NEMA type
Color
Test function
Padlockable
Defeatable
Black
1, 3R, 4, 4X, 12
N
Y
Y
Red/yellow
External right side operated pistol handles - shaft required
NEMA type
Color
Test function
Padlockable
Defeatable
Black
1, 3R, 4, 4X, 12
N
Y
N/A
Red/yellow
Shafts for pistol handles
Length — in (mm) Mounting depth (X) — in (mm)
200 A: 5.70-9.06 (145-230)
7.9 (200)
400 A: 7.87-10.24 (200-260)
200 A: 5.70-13.78 (145-350)
12.6 (320)
400 A: 7.87-16.93 (200-380)
15.7 (400)
1
Fuse
class
200 A: 5.70-16.93 (145-430)
400 A: 7.87-18.10 (200-460)
Catalog no.
LUG1-2
LUG1-3
LUG1-4
LUG2-2
LUG2-3
LUG2-4
Catalog no.
H12-03B
H12-03R
H4X-06B
H4X-06R
H4X-06TB
H4X-06TR
Catalog no.
H4X-06BHD
H4X-06RHD
Catalog no.
H4X-06SB
H4X-06SR
Catalog no.
SH5-200
SH5-320
SH5-400
OR
Flange handle (1) 200 A only - requires shaft operated mechanism or cable operated mechanism +
cable
NEMA type
Flange style
Test function
Padlockable
Defeatable
Catalog no.
1, 3R, 4, 12
Standard
FLH1
N
Y
Y
1, 3R, 4, 4X, 12
Chrome plated
FLH2
Shaft operated flange mechanism (2) 200 A only - includes shaft
For enclosure depth — in (mm)
Catalog no.
6~24 (152~613)
FLRM
Cable operated flange mechanism and cable 200 A only - must select Mechanism (3) and Cable (4)
Item — in (mm)
Catalog no.
Cable mechanism
FLCM
36 (900) cable
FLC36
60 (1500) cable
FLC60
120 (3000) cable
FLC120
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
OR
NFPA through the door handle kit - to be used with front pistol handle
Use with switch
Color
Test function
Padlockable
Defeatable
RDF200J-_
Catalog no.
H79-2
Red
RDF400J-_
N
Y
N
H79-3
AND...
Contact type
No. of contacts
Continuous amp
rating
Voltage (Vac)
1
10
600
NO
NC
Max number of
aux contacts per
Catalog no.
switch catalog
number
RDF200J-__: 4
BAC05
RDF400J-__: 8
BAC06
Shrouds
Accessories
AND...
Terminal shrouds - includes terminal shroud for lineside or loadside
Switch amps
Poles
2
3
200
4
Catalog no.
TSH8-2TB
TSH8-3TB
TSH8-4TB
2
3
TSH9-2TB
TSH9-3TB
4
TSH9-4TB
400
Dimensions — in (mm)
RDF200J-3
RDF400J-3
7.72
196.2
7.08
180
6.61
168
4.37
111.1
10.19 (3P) - 12.79 (4P)
259 (3P) - 325 (4P)
9.44
240
15.35
390
7.97
202.5
3.98
101.25
11.46
291.3
7.67
195
6.50
165.2
5.28
134.2
3.98
101.25
2.95
75
6.18
157
0.98
24.9
5.11
130
2.95
75
1.41
36
1.96
50
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
3.26
83
2.59
66
2.59
66
Eaton.com/bussmannseries
11-67
Disconnect
switches
Aux. contacts
Auxiliary contacts
11 — Disconnect switches
Dimensions — in (mm)
DIR-07 direct mount handle
1.57
40
FLH_ flange handle
3.50
(88.9)
1.79
45.5
1.06
(26.9)
0.86
(21.8)
5.31
135
Ø0.28
(Ø7.1)
Ø0.50
1.55
(39.4)
(Ø12.7)
2.16
(54.9)
5.66
(143.8)
6.22
(158.0)
4.68
(118.9)
1.00
(25.4)
1.00 0.88
(25.4) (22.3)
2.32
(58.9)
7.10
(180.3)
2.70
(68.6)
External front and right side pistol handle
Handle type
Direction of front operation
Direction of right side operation
I
I
Ø3.07
Ø78
Door drilling layout
°
0
0.78
20
0
H4X-06__
H12-03__
1.77
45
0.78
20
65°
4.92
125
Ø 1.46
Ø 37
4 Ø 0.27
4Ø7
90
°
90
TEST
0.55
14
0.55
14
Terminal lugs
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
0.63
15.88
0.44
11.13
2.8
71.5
0.46
11.68
0.25
6.35
1.12
28.6
Ø 0.4
Ø 4.7
1.3
35
0.45
Ø11.6
1.52
38.8
11-68
400 A (LUG2-__)
1.8
46
1
25
200 A (LUG1-__)
Eaton.com/bussmannseries
Disconnect switches — 11
Standard 600 amp Class J and 800 amp Class L
For a complete assembly, select:
Amps
Fuse
class
600
J
800
+
L
Terminal lug kit
Switch amps
600-800
Poles
2
3
4
2
3
4
SCCR ()kA)
Poles
Lugs per kit
2
2
3
3
4
4
200
Max horsepower rating, 3-phase
220/240
440/480
600
200
400
500
200
400
500
200
500
500
200
500
500
Conductor AWG size / type
Catalog no.
RDF600J-2
RDF600J-3
RDF600J-4
RDF800L-2
RDF800L-3
RDF800L-4
Catalog no.
LUG5-2
(2) 2-600 kcmil
75°C Cu/ Al
LUG5-3
LUG5-4
PLUS
Select for standard application
Direct mount handle - mounts directly to switch, no shaft required
Handles
Or
For switch cat. no.
Color
Test
function
Padlockable
Defeatable
All switches
Black
Y
Y
N
OR
External front operated pistol handles - shaft required
Test
NEMA type
Color
Padlockable
Defeatable
function
Black
1, 3R, 4, 4X, 12
N
Y
Y
Red/yellow
Metallic hasp (heavy duty) external front operated pistol handles - shaft required
NEMA
Test
Color
Padlockable
Defeatable
type
function
Black
DIR-08
Catalog no.
H4X-07B
H4X-07R
Catalog no.
H4X-07BHD
1, 3R, 4, 4X, 12
N
Y
Y
Red/yellow
+
Catalog no.
H4X-07RHD
Shafts for pistol handles
Length — in (mm) Mounting depth (X) — in (mm)
Catalog no.
7.9 (200)
SH7-200
10.63~11.97 (270~304)
12.6 (320)
10.63~16.69 (270~424)
SH7-320
15.7 (400)
10.63~19.84 (270~504)
SH7-400
OR
NFPA through the door handle kit - to be used with front pistol handle
Test funcFor switch cat. no.
Color
Padlockable
Defeatable
tion
All switches
Red
N
Y
N
Catalog no.
H79-4
Contact type
NO
NC
No. of
contacts
Continuous
amp rating
Voltage
(Vac)
Max number of aux contacts per
switch
1
10
600
8
AND...
Terminal shrouds - includes terminal shroud for lineside or loadside
Switch amps
Poles
Shrouds
Accessories
Aux. contacts
AND...
Auxiliary contacts
600-800
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Catalog no.
BAC05
BAC06
Catalog no.
2
TSH10-2TB
3
TSH10-3TB
4
TSH10-4TB
Eaton.com/bussmannseries
11-69
Disconnect
switches
Switch + lugs
Switch
11 — Disconnect switches
Dimensions — in (mm)
RDF600J-3 and RDF800L-3
min 10.43
min 265
9.84
250
11.18 (3P) - 14.88 (4P)
284 (3P) - 378 (4P)
1.34
2.56
65
34
6.10
155
3.36
85.5
3.12
79.5
14.96
380
Fuse Cover Fully Open
18.58
472
18.54
471
fix 9.84
fix 250
5
126.5
10.23
260
3.36
85.5
0.27
7
11.81
300
0.27
7
3.54
90
11.81
300
0.27
7
0.43
11
2.32
59
0.35
9
Ø 0.51
Ø13
2
51 3.7
3.7
94
94
14.33 (3P) - 18.03 (4P)
364 (3P) - 458 (4P)
Dir-08 drect mount handle
7.48
190
2.36
60
3.35
85
External front pistol handle
Direction of front operation
Handle type
Ø3.07
Ø78
Door drilling layout
Ø 1.46
Ø 37
0.78
20
4 Ø 0.27
4Ø7
0.78
20
0
210
90
°
I
H4X-07__
0.55
14
61
0.55
14
Terminal lugs
600 to 800 A (LUG5-__)
1.49
38
3.76
95.5
0.40
Ø10.2
11-70
0.64
16.2
2.87
73
3.15
80
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
UL 98 non-fused rotary disconnect switches — 30
to 1200 amps
Bussmann series UL 98 non-fused rotary disconnect switches are
versatile switches that “break” and “make” power circuits ON and
OFF load.
•
UL 98, Guide WHTY, File E155130
•
CSA 22.2 No. 4, File 257020
•
Conforms with IEC 60947-3
Disconnect
switches
Agency information
Features
Related Bussmann series products
•
Make and break power under load
•
Up to 200 kA SCCR
•
Panel mount (30-100 A compact DIN-Rail or panel mount)
•
Disconnect switches are front, right side and direct handle
operable (30-100 A)
•
Finger-safe (30-100 A compact only)
•
Fully visualized breaking (100-1200 A)
Fuse blocks
Modular Class H(K), J and RK fuse blocks up to 600 A
Modular Class H(K), J and RK power distribution fuse blocks up to 400 A
Modular, finger-safe CH Class CC and J, and UL supplemental and IEC
10x38mm DIN-Rail holders up to 60 A
Finger-safe Optima Class CC, UL supplemental and IEC 10x38mm DINRail/panel mount holders up to 30 A
Finger-safe Optima™ Class CC, UL supplemental and IEC 10x38mm
DIN-Rail/panel mount protection modules up to 30 A
Online resources
Visit Eaton.com/bussmannseries for:
•
CAD drawings
•
Instruction sheets
•
UL information
IEC specifications
RD30-3
3-pole
4-pole
Thermal current Ith @ 40°C (A)
Rated insulation voltage Ui (V)
Rated impulse withstand voltage Uimp (kV)
Rated operation currents Ie (A)
Load duty
Rated voltage (Vac)
category
AC-22 A
400
AC-23 A
AC-22 A
690
AC-23 A
Operational power (Vac) in AC-23 (kW)
400 V w/o prebreak AC 1, 2
500 V w/o prebreak AC 1, 2
690 V w/o prebreak AC 1, 2
Overload capacity (Ue 415 Vac)
Rated short-circuit making capacity Icm (kA peak) 3
Fuse protected short-circuit withstand
(kA RMS prospective)
Short-circuit current (kA) 3
Associated fuse rating (A) 3
Connection
Minimum Cu cable cross section (mm2)
Minimum Cu busbar section (mm2)
Maximum Cu cable section (mm2)
RD200-3
RD600-3
Catalog no.
RD30-3 RD60-3 RD100-3 RD100-3-SCCR RD200-3 RD400-3
—
—
—
—
RD200-4 RD400-4
30
60
100
100
200
400
800
800
800
1000
1000
1000
8
8
8
8
8
8
A
1
A
1
A
1
A
1
A
1
100
32
15
63
30
80
63
45
18.5
100
200
A
1
RD600-3
RD600-4
—
1000
12
A
1
RD800-3
RD800-4
—
1000
12
A
RD1000-3
RD1000-4
—
1000
12
A
1
1
RD1200-3
RD1200-4
—
1000
12
A
1
630
800
1000
315
500
200
630
400
630
400
1200
1000
630
400
400
51
63
90
100
140
185
220
280
185
355
450
185
450
560
400
560
560
400
400
12
12
12
17.6
32
48
48
75
48
75
50
32
50
63
25
100
200
100
200
200
400
100
630
100
800
100
1000
100
1250
2.5
—
70
2.5
—
70
10
—
70
35
—
300
70
—
300
185
—
600
2x150
2x30x5
—
2x185
2x40x5
—
2x240
2x50x5
—
—
2x60x5
—
1 A/B: Category with index A = frequent operation; category with index B = infrequent operation.
2 The power value is given for information only; the current values vary from one manufacturer to another.
3 For a rated operating voltage, Ue = 400 Vac.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-71
11 — Disconnect switches
UL specifications
RD30-3
RD200-3
RD600-3
Catalog no.
3-pole
4-pole
UL standard
Max ampacity
Switch type
Handle operation
UL electrical ratings
Max voltage (AC)
Max voltage (DC)
1-phase, 120
1-phase, 240
Max. AC Hp
3-phase, 240
ratings
3-phase, 480
3-phase, 600
125
DC Hp ratings
250
Electrical characteristics
SCCR with fuse (kA)
Fuse class
Max. fuse rating (A)
Terminal lugs/kits
Lug mounting torque - lb-in
(N•m)
Wire type
Solid
Wire range
and torque lb-in (N•m)
Stranded
RD30-3
—
UL 98
30 A
Compact
Front/Side
RD60-3
—
UL 98
60 A
Compact
Front/Side
RD100-3
—
UL 98
100 A
Compact
Front/Side
RD100-3SCCR
—
UL 98
100 A
Standard
Front
600 Vac
—
2
5
10
20
25
—
—
600 Vac
—
3
10
20
40
50
—
—
600 Vac
—
5
10
20
50
50
—
—
600 Vac
250 Vdc
—
10
30
75
100
—
—
600 Vac
250 Vdc
—
10
75
150
200
—
—
600 Vac
—
—
—
125
250
350
—
—
600 Vac
250 Vdc
—
—
200
400
350
20
50
600 Vac
—
—
—
200
500
500
—
—
600 Vac
—
—
—
200
500
500
—
—
600 Vac
—
—
—
200
500
500
—
—
100
J
30
Integral
100
J
60
Integral
25 /100*
J
100
Integral
200
J
10A
•
200
J
200
•
200
J
600
•
100
L
800
•
100
L
1000
•
100
L
1200
•
—
—
—
160 (18)
160 (18)
200
J
400
•
LUG2-_ 310 (35)
LUG3-_ 398 (45)
310 (35)
310 (35)
310 (35)
310 (35)
75°C Cu
75°C Cu
75°C Cu
75°C Cu/ Al
75°C Cu/ Al
75°C Cu/ Al
75°C Cu/ Al
75°C Cu/
Al
12-10,
35.4 (4)
12-10,
35.4 (4)
12-10,
35.4 (4)
—
—
—
—
—
—
—
LUG2-_ 4-600
kcmil, 550 (62)
(2) 2-600
kcmil, 375
(42.4)
(4) 2-600
kcmil, 375
(42.4)
(4) 2-600
kcmil, 375
(42.4)
(4) 2-600
kcmil, 375
(42.4)
6000
3500
3500
3500
18.1 (8.2)
23.9 (10.9)
19.6 (8.9)
25.3 (11.5)
19.6 (8.9)
25.3 (11.5)
19.6 (8.9)
25.3 (11.5)
10-1,
35.4 (4)
10-1,
35.4 (4)
10-1,
35.4 (4)
1/0, 39.8
(4.5)
1/0, 39.8
(4.5)
1/0, 39.8
(4.5)
2/0, 44.3
(5)
2/0, 44.3 (5) 2/0, 44.3 (5)
Mechanical characteristics
Endurances/Cycles
Physical characteristics
Dimensions
3-pole
Weight - lbs
(kg)
4-pole
Environmental
Operating Temperature
Flammability Rating
Accessories
3-pole
Lug kit cat. no.
4-pole
NEMA 1,
3R, 12
NEMA 1, 3R,
4, 4X, 12
Handles
Direct
Front Pistol
Front or Side
Selector
Shaft c/s - mm
Shaft guide
Shrouds
Additional pole accessory
NO + NC
Auxiliary
contacts
(2) NO
10,000
10,000
10,000
1.3 (0.6)
—
1.3 (0.6)
—
1.3 (0.6)
—
-20 to 70°C
-20 to 70°C
UL 94-V0
UL 94-V0
-20 to
70°C
UL 94-V0
Integral
—
Integral
—
•
•
6-300 kcmil,
275 (31)
RD200-3
RD200-4
UL 98
200 A
Standard
Front
RD400-3
RD400-4
UL 98
400 A
Standard
Front
RD600-3
RD600-4
UL 98
600 A
Standard
Front
RD800-3
RD800-4
UL 98
800 A
Standard
Front
RD1000-3
RD1000-4
UL 98
1000 A
Standard
Front
RD1200-3
RD1200-4
UL 98
1200 A
Standard
Front
6-300 kcmil,
275 (31)
75°C Cu/ Al 75°C Cu/ Al
Dual 1/0-250
kcmil, 550 (62)
LUG3-_: (2) 6-2,
200 (22.6)
(2) 1-350 kcmil,
375 (42.4)
10,000
8000
6000
See drawings on product pages
4.2 (1.91)
4.2 (1.91)
10.0 (4.6)
—
5.0 (2.3)
12.3 (5.6)
-20 to 70°C
-20 to 70°C
-20 to 70°C
UL 94-V0
UL 94-V0
UL 94-V0
-20 to 70°C -20 to 70°C -20 to 70°C -20 to 70°C
UL 94-V0
UL 94-V0
UL 94-V0
UL 94-V0
Integral
—
•
—
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
—
—
—
—
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
—
—
—
—
—
—
—
5x5
•
•
•
•
•
5x5
•
•
•
•
•
5x5
•
•
•
•
•
10x10
•
•
—
•
—
10x10
•
•
—
•
—
10x10
•
•
—
•
—
12x12
•
•
—
•
—
12x12
•
•
—
•
—
12x12
••
•
—
•
—
12x12
•
•
—
•
—
• Available, see product page for details and catalog numbers.
— Not available.
* 25 kA @ 600 Vac, 100 kA @ 480 Vac.
11-72
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
UL 98 non-fused rotary disconnect switches — 30, 60 and compact 100 A
For a complete assembly, select:
Switch
2
Or
Handles
Select for standard application
1
+
1
2
+
Conductor
600 AWG size/type
25
10-2/0 Str/12-10 Sol
50
75°C Cu
50
PLUS
Direct mount handle - mounts directly to switch, no shaft required
For switch cat. no.
Color
Test function
Padlockable
All switches
Black
N
Y - On Switch
OR
External front or right side operated selector handles - shaft required
Handle
NEMA type
Color
Test function
Padlockable
length
Black
Short
Red/yellow
Short
1, 3R, 4, 4X, 12
N
Y
Black
Long
Red/yellow
Long
External front operated pistol handles - shaft required
Handle
NEMA type
Color
Test function
Padlockable
Defeatable
length
Black
—
1, 3R, 4, 4X, 12
N
Y
Y
Red/yellow
—
Metallic hasp (heavy duty) external front operated pistol handles - shaft required
Handle
NEMA type
Color
Test function
Padlockable
Defeatable
length
Black
—
1, 3R, 4, 4X, 12
N
Y
Y
Red/yellow
—
Shafts for selector handles
Length — in (mm) Mounting depth (X) — in (mm)
5.9 (150)
3.50~7.60 (89~193)
7.9 (200)
3.50~9.50 (89~241)
12.6 (320)
3.50~14.9 (89~378)
Shafts for pistol handles
Length — in (mm) Mounting depth (X) - in (mm)
7.9 (200)
3.30~7.40 (84~188)
12.6 (320)
3.30~9.30 (84~236)
15.7 (400)
3.30~14.7 (84~373)
Shaft guide for selector handles
Aux. contacts
Shrouds
Accessories
NO + NC
1 of each
NO
2
Catalog no.
H4X-01B (1)
H4X-01R (1)
H4X-02B (2)
H4X-02R (2)
Catalog no.
H4X-03B
H4X-03R
Catalog no.
H4X-03BHD
H4X-03RHD
Catalog no.
SH4-150 (1)
SH4-200 (1)
SH4-320 (1)
Catalog no.
SH3-200 (2)
SH3-320 (2)
SH3-400 (2)
Catalog no.
SH-GUIDE2
Voltage (Vac)
240
10
Catalog no.
DIR-02
Catalog no.
SH-GUIDE1
Required for 12.6" (320mm) long shafts, optional for other lengths
Shaft guide for pistol handles
Required for 15.7î (400mm) long shafts, optional for other lengths
AND...
Auxiliary contacts
Continuous amp
Contact type
No. of contacts
rating
Catalog no.
RD30-3
RD60-3
RD100-3
Max number of units per
Catalog no.
switch
2 (1 per side/4 contacts
BAC01
total)
2 (1 per side/4 contacts
BAC02
total)
AND...
Terminal shrouds - includes terminal shroud for both lineside and loadside
Switch
Poles
Location on switch
amps
1 (for switched 4th pole)
All switchLineside and loadside
es
3
AND...
Catalog no.
TSH3-1TB
TSH3-3TB
Sw. 4th pole
Switched 4th Pole - converts 3-pole switch to 4-pole
Switch amps
Catalog no.
30
POLE98-30
60
POLE98-60
100
Auxiliary contact
configurations
POLE98-100
Possible 4 pole
configurations
th
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-73
Disconnect
switches
Switch
Amps
Poles
SCCR (kA)
30
100
60
3
100
25/100*
* 100 kA @480 Vac, 25 kA @ 600 Vac.
Max horsepower rating
1-phase
3-phase
120
220/240 220/240
440/480
2
5
10
20
3
10
20
40
5
10
20
50
11 — Disconnect switches
Dimensions - in (mm)
Direct handle operation
2
1.42
36
3.07
78
1.02
26
1
1
2
External right side operation
3.94 min./14.65 max.
100 min./372 max.
3.19
81
2.52
64
1.99
50.6
3.07
78
1.02
26
0.51
13
1
1.18 min./7.91 max.
30 min./201 max.
1
2
0.24
6
0.35 1.02
8.8 26
1.02
26
M5
1.02 0.35
26 8.8
2.08
53
5.17
131.4
7.44
189
2.79
71
4.90
124.6
7.44
189
5.17
131.4
4.91
124.6
2
2.09
53
0.34 1.02
8.8 26
0.26
6
1.02
26
M5
1.02
26
0.34
8.8
1. Position for 1 switched 4th pole (1 per device max.) or 1 auxiliary contact.
2. Position for 1 auxiliary contact only.
Note: Maximum of 4 Auxiliary contacts, or 3 Auxiliary contacts + one switched 4th pole.
External front/right side operated selector handle, front operated pistol handle
Handle type
Door drilling layouts
Ø3.07
Ø78
1.57
40
1.42
36
I
3.46
88
Ø3.07
Ø78
Selector
H4X-02_
I
°
90
°
90
Ø 1.22
Ø 31
0
0.11
3
4 Ø 0.27
4Ø7
Direction of
right side operation
0
Ø 0.88
Ø 22.5
With 4 Mounting Screws
1.45
37
0.53
13.5
Direction of
front operation
1.10
28
2.79
71
Selector
H4X-01_
With mounting nut
1.57
40
1.10
28
4 Ø 0.27
4Ø7
Pistol
H4X-03_
H4X-03_ with 4 mounting screws
Ø 1.45in/37mm screw clip (from front)
Ø 1.22in/31mm screw (from rear)
11-74
1.42
36
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
2.79
71
2.95
75
2.52
64
External front operation
Disconnect switches — 11
UL 98 non-fused rotary disconnect switches—100, 200 and compact 400 A
For a complete assembly, select:
Amps
100
+
Select for standard application
Switch
200
Handle
Or
+
+
Poles
1-phase
220/240
10
10
10
-
SCCR (kA)
3
4
3
400
4
Terminal lug kit
Switch
Poles
amps
2
100-200
3
4
2
3
4
400
2
3
4
200
Lugs per kit
2
3
4
2
3
4
2
3
4
Max horsepower rating
3-phase
220/240
440/480
30
75
75
150
75
150
125
250
125
250
600
100
200
200
350
350
Conductor AWG size/type
6-300 kcmil
75°C Cu/ Al
4-600 kcmil or Dual 1/0-250 kcmil
75°C Cu/ Al
(2) 6-350 kcmil
75°C Cu/ Al
PLUS
Direct mount handle - mounts directly to switch, no shaft required
Test
For switch cat. no.
Color
Padlockable
function
All switches
Black
N
Y
OR
External front operated pistol handles - shaft required
Test
NEMA type
Color
Padlockable Defeatable
function
Black
1, 3R, 12
Red/yellow
N
Y
Y
Black
1, 3R, 4, 4X, 12
Red/yellow
Metallic hasp (heavy duty) external front operated pistol handles - shaft required
Test
NEMA type
Color
Padlockable Defeatable
function
Black
1, 3R, 4, 4X, 12
N
Y
Y
Red/yellow
Shafts for pistol handles
Length — in (mm)
Mounting depth (X) - in (mm)
7.9 (200)
5.31~10.43 (135~265)
12.6 (320)
5.31~15.16 (135~385)
15.7 (400)
5.31~18.31 (135~465)
Shaft Guide
Catalog no.
RD100-3-SCCR
RD200-3
RD200-4
RD400-3
RD400-4
Catalog no.
LUG1-2
LUG1-3
LUG1-4
LUG2-2
LUG2-3
LUG2-4
LUG3-2
LUG3-3
LUG3-4
Catalog no.
DIR-03
Catalog no.
H12-03B
H12-03R
H4X-06B
H4X-06R
Catalog no.
H4X-06BHD
H4X-06RHD
Catalog no.
SH5-200
SH5-320
SH5-400
Catalog no.
Required for 15.7î (400mm) long shafts, optional for other lengths
SH-GUIDE2
Accessories
Aux. contacts
AND...
Auxiliary contacts
Contact
No. of
Continuous amp rating
type
contacts
NO + NC
10.1
NO + NC
1 of each
NO + NC
1
NO + NC
Voltage
Vac
Max number of aux
contacts per switch
125-250
2
125
Catalog no.
BAC03*
BAC04*
BAC11*
BAC12*
Shrouds
* For one auxiliary contact, install either BAC03 or BAC11. For two auxiliary contacts, install BAC03 + BAC04, or BAC11 + BAC12.
AND...
Terminal shrouds - includes terminal shroud for Lineside or loadside
Switch
Poles
Location on switch
amps
Lineside
3
100-200
Loadside
4
Lineside or loadside
Lineside
3
400
Loadside
4
Lineside or loadside
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Catalog no.
TSH4-3T
TSH4-3B
TSH4-4TB
TSH5-3T
TSH5-3B
TSH5-4TB
11-75
Disconnect
switches
Switch
11 — Disconnect switches
Dimensions — in (mm)
M
J1
U
Z
Y
1
W
H
N
AA
AC
K
V
CA
R1
R2
T
AD
C
F
Switch Overall
amps dim. C
100
3.72 (95)
200
3.72 (95)
400
4.92 (128)
Terminal shrouds
AC
AD
10.1
3.05 (78)
(256)
10.1
3.05 (78)
(256)
16
4.15 (115)
(406)
F 3p.
7.09
(180)
7.09
(180)
9.05
(230)
DIR-03 direct mount handle
1.57
40
1.79
45.5
F 4p.
9.06
(230)
9.06
(230)
11.4
(290)
Switch body
H
J1 3p.
4.22
2.17
(107)
(55)
4.22
2.17
(107)
(55)
6.53
2.95
(166)
(75)
J1 4p.
4.13
(105)
4.13
(105)
5.31
(135)
K
1.8
(46)
1.8
(46)
2.65
(68)
M 3p.
6.3
(160)
6.3
(160)
8.26
(210)
Switch
M 4p.
8.27
(210)
8.27
(210)
10.6
(270)
mounting
N
R1
5.31 0.35
(135)
(9)
5.31 0.35
(135)
(9)
7.67 0.35
(195)
(9)
R2
0.27
(7)
0.27
(7)
0.27
(7)
T
1.97
(50)
1.97
(50)
2.56
(65)
U
0.98
(25)
0.98
(25)
1.77
(45)
V
1.18
(30)
1.18
(30)
1.97
(50)
Connection
W
Y
0.43 0.14
(11)
(4)
0.43 0.14
(11)
(4)
0.43
0.2
(13)
(5)
Z
1.35
(34)
1.35
(34)
2.08
(53)
AA
6.3
(160)
6.3
(160)
10.2
(260)
External front handle
Handle type
Direction of front operation
Door drilling layout
I
0.78
20
90
H4X-06__
H12-03__
1.77
45
0.78
20
65°
0
4.92
125
5.31
135
Ø 1.46
Ø 37
4 Ø 0.27
4Ø7
°
Ø3.07
Ø78
TEST
0.55
14
0.55
14
1.52
38.8
2.8
71.5
0.46
11.68
0.88
2.31 73.15
58.67
Ø 0.4
Ø 4.7
0.63
15.88
0.53
13.46
1.94
49.30
0.45
Ø11.6
1.3
35
1
25
Terminal lugs
LUG1-_ 100 to 200 A
11-76
LUG2-_ 400 A
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
1.25
31.75
0.44
11.13
1.8
46
1.12
28.6
0.25
6.35
1.19
30.23
0.25
6.35
LUG3-_ 400 A
Eaton.com/bussmannseries
AC
0.6
(15)
0.6
(15)
0.8
(20)
Disconnect switches — 11
UL 98 non-fused rotary disconnect switches — 600, 800, 1000 and 1200 A
For a complete assembly, select:
Switch
600
800
1000
Switch
220/240
240
240
200
200
200
200
200
200
Poles
Lugs per kit
Lugs required per pole
3
4
3
4
3
4
6
8
Poles
3
4
3
4
3
4
3
4
1200
200
100
DC*
125
20
20
-
250
50
50
-
Catalog no.
RD600-3
RD600-4
RD800-3
RD800-4
RD1000-3
RD1000-4
RD1200-3
RD1200-4
Disconnect
switches
Amps
Max horsepower rating
3-phase
440/480
600
400
350
400
350
500
500
500
500
500
500
500
500
500
500
500
500
SCCR
(kA)
* DC ratings use two poles in series.
+
Terminal lug kit
Switch amps
600
Select for standard application
800-1200
1
2
PLUS
Direct mount handle - mounts directly to switch, no shaft required
For switch cat. no.
Color
Test function
All switches
Handles
1
3
2
Or
+
+
4
Black
Conductor AWG
Catalog no.
size/type
(2) 2-600 kcmil LUG5-3
75°C Cu/ Al
LUG5-4
(4) 2-600 kcmil LUG6-6
75°C Cu/ Al
LUG6-8
Padlockable
N
Y
OR
External front operated pistol handles - shaft required
NEMA type
Color
Test function Padlockable
Defeatable
Black
Red/yellow
1, 3R, 4, 4X, 12
N
Y
Y
Black
Red/yellow
Metallic hasp (heavy duty) external front operated pistol handles - shaft required
NEMA type
Color
Test function Padlockable
Defeatable
Black
Red/yellow
1, 3R, 4, 4X, 1
N
Y
Y
Black
Red/yellow
Shafts for pistol handles
Length — in (mm)
Mounting depth (X) — in (mm)
7.9 (200)
8.70~13.50 (221~343)
12.6 (320)
8.70~18.23 (221~463)
15.7 (400)
8.70~21.38 (221~543)
Shaft guide
Catalog no.
DIR-04
Catalog no.
H4X-07B (1)
H4X-07R (1)
H4X-08B (2)
H4X-08R (2)
Catalog no.
H4X-07BHD
H4X-07RHD
H4X-08BHD
H4X-08RHD
(3)
(3)
(4)
(4)
Catalog no.
SH6-200
SH6-320
SH6-400
Catalog no.
Required for 15.7" (400mm) long shafts, optional for other lengths
SH-GUIDE2
AND...
Aux. contacts
Contact type No. of contacts Continuous amp rating Voltage (Vac)
NO
NO
NO
NO
+
+
+
+
NC
NC
NC
NC
1
1
1
1
of
of
of
of
each
each
each
each
10.1
125-250
1
125
Max number of aux contacts
Catalog no.
per switch
BAC03*
BAC04*
2
BAC11*
BAC12*
* For one auxiliary contact, install either BAC03 or BAC11. For two auxiliary contacts, install BAC03 + BAC04, or BAC11 + BAC12.
Shrouds
Accessories
Auxiliary contacts
AND...
Terminal shrouds* — includes terminal shroud for lineside or loadside
Switch amps
Poles
Location on switch
3
600
4
Lineside or loadside
3
800-1200
4
* Shroud for lineside included with switch.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Catalog no.
TSH6-3TB
TSH6-4TB
TSH7-3TB
TSH7-4TB
11-77
11 — Disconnect switches
Dimensions — in (mm)
600 A
800 to 1200 A
Switch body
Switch mounting
Connection
Switch
amps
Terminal
shrouds B
F 3p.
F 4p.
H
J 3p.
J 4p.
M 3p.
M 4p.
N
N1
N2
AA
Z
600
18.12 (460)
11 (280)
14.17 (360)
5.5 (140)
5 (128)
6.59 (168)
10.03 (255)
13.19 (335)
6.88 (175)
2.34 (60)
1.1 (28)
12.6 (320)
1.85 (47)
800
18.12 (460)
14.64 (372) 19.37 (492)
5.5 (140)
6.83 (174)
9.19 (234)
13.66 (347) 18.38 (467)
6.88 (175)
2.34 (60)
1.1 (28)
13 (330)
1.85 (47)
1000
18.12 (460)
14.64 (372) 19.37 (492)
5.5 (140)
6.83 (174)
9.19 (234)
13.66 (347) 18.38 (467)
6.88 (175)
2.34 (60)
1.1 (28)
13 (330)
1.85 (47)
1200
18.12 (460)
14.64 (372) 19.37 (492)
5.5 (140)
6.83 (174)
9.19 (234)
13.66 (347) 18.38 (467)
6.88 (175)
2.34 (60)
1.1 (28)
13 (330)
1.85 (47)
DIR-04 Direct mount handle
2.36
60
External front pistol handles
Direction of Front Operation
Handle Type
I
Door drilling layout
8.27
210
3.35
85
H4X-07__
Ø 1.46
Ø 37
4 Ø 0.27
4Ø7
2.4
61
0.78
20
7.48
190
0
90
°
Ø3.07
Ø78
Terminal lugs
H4X-08__
°
90
13.78
350
0.78
20
I
Ø3.07
Ø78
0.55
14
0
2.36
60
LUG5-__, LUG6-__ 600 to 1200 A
1.49
38
3.76
95.5
0.40
Ø10.2
11-78
0.64
16.2
2.87
73
3.15
80
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
0.55
14
Disconnect switches — 11
UL 508 non-fused rotary disconnect switches —
16 to 80 A
Eaton UL 508 load break disconnect switches allow safe control and
safe disconnection of any motor application or to isolate a circuit
within the panel.
These disconnect switches are compact and offer a wide variety of
accessories like 4th poles, Auxiliary contacts, door mounting and
6/8-Pole kits.
Disconnect
switches
Features
•
Suitable for motor disconnect
•
DIN-Rail or panel mount
•
Door mount option
•
Disconnect switches are front, right side or direct handle operable
•
Finger-safe
Agency information
Related Bussmann series products
•
UL 508, Guide NLRV, File E155129
•
CSA C22.2 No. 14, File 257020
•
Conforms with IEC 60947-3
Online resources
Visit Eaton.com/bussmannseries for:
•
CAD drawings
•
Instruction sheets
•
UL information
IEC specifications
RD16-3-508
Catalog no.
RD16-3-508
Thermal current Ith at 40°C (A)
16
Rated insulation voltage Ui (V)
800
Rated impulse withstand voltage Uimp (kV)
8
Rated operation currents Ie (A)
Load duty category
Rated voltage
A/B 1
AC-22 A/ AC-22 B
16/16
500
AC-23A/ AC-23 B
16/16
AC-21 A/ AC-21 B
16/16
690
AC-22 A/ AC-22 B
16/16
AC-23A/ AC-23 B
16/16
Operational power in AC-23 (kW)
400 Vac without prebreak AC 1, 2
7.5
500 Vac without prebreak AC 1, 2
7.5
690 Vac without prebreak AC 1, 2
7.5
Overload capacity (Ue 415 Vac)
Rated short-time withstand current 0.3 s. ICW (kA
2.5
RMS) 3
6
Rated short-time making capacity Icm (kA peak) 3
Fuse protected short-circuit withstand (kA RMS prospective)
Prospective short-circuit current (kA RMS) 3
50
Associated fuse rating (A) 3
16
Connection
Minimum Cu cable cross section (mm2)
1.5
Maximum Cu cable section (mm2)
16
Tightening torque min/max (N•m)
2/2.2
Fuse blocks
Modular Class H(K), J and RK fuse blocks up to 600 A
Modular Class H(K), J and RK power distribution fuse blocks up to 400 A
Modular, finger-safe CH Class CC and J, and UL supplemental and IEC
10x38mm DIN-Rail holders up to 60 A
Finger-safe Optima Class CC, UL supplemental and IEC 10x38mm DINRail/panel mount holders up to 30 A
Finger-safe Optima™ Class CC, UL supplemental and IEC 10x38mm
DIN-Rail/panel mount protection modules up to 30 A
RD16-3-508 with 6-pole conversion kit
RD25-3-508
25
800
8
RD40-3-508
40
800
8
RD63-3-508
63
800
8
RD80-3-508
80
800
8
A/B 1
25/25
25/25
25/25
25/25
25/25
A/B 1
40/40
25/25
40/40
32/40
25/25
A/B 1
63/63
63/63
63/63
40/63
40/40
A/B 1
80/80
63/63
80/80
63/80
40/40
11
11
15
18.5
15
18.5
30
30
30
37
37
37
2.5
2.5
3
3
6
6
9
9
50
25
50
40
50
63
50
80
1.5
16
2/2.2
1.5
16
2/2.2
2.5
35
3.5/3.85
2.5
35
3.5/3.85
1 A/B: Category with index A = frequent operation; category with index B = infrequent operation.
2 The power value is given for information only; the current values vary from one manufacturer to another.
3 For a rated operating voltage, Ue = 400 Vac.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-79
11 — Disconnect switches
UL specifications
RD16-3-508
Catalog no.
UL standard
Max ampacity
Handle operation
UL ratings
Max voltage (AC)
3-phase,
3-phase,
3-phase,
3-phase,
Max. Hp ratings
208
240
480
600
Electrical characteristics
SCCR with fuse (kA)
Recommended upstream
Fuse class
Max. fuse rating (A)
Terminals
Wire type
Wire range and torque - lb-in
(N•m)
Solid single
Solid dual
Stranded single
Stranded dual
Mechanical characteristics
Endurances/cycles
Physical characteristics
Dimensions
Weight- lb (kg)
Environmental
Operating temperature
Flammability rating
Accessories
Long selector/NEMA 1, 3R, 4,
4X, 12
Pistol handle/NEMA 1, 3R, 4,
4X, 12
Selector handle shafts - 5x5mm
Pistol handle shafts - 5x5mm
RD16-3-508
UL 508
16 A
Front/Side
RD25-3-508
UL 508
25 A
Front/Side
RD40-3-508
UL 508
40 A
Front/Side
RD63-3-508
UL 508
63 A
Front/Side
RD80-3-508
UL 508
80 A
Front/Side
600 Vac
3
5
10
10
600 Vac
7.5
7.5
15
20
600 Vac
7.5
7.5
20
25
600 Vac
15
20
40
40
600 Vac
15
20
40
40
65
J
30
Integral
75°C Cu
14-10, 26.5 (3)
12, 26.5 (3)
14-4, 26.5 (3)
14-12, 26.5 (3)
65
J
30
Integral
75°C Cu
14-10, 26.5 (3)
12, 26.5 (3)
14-4, 26.5 (3)
14-12, 26.5 (3)
10/65
J
60/30
Integral
75°C Cu
14-10, 26.5 (3)
12, 26.5 (3)
14-4 , 26.5 (3)
14-12, 26.5 (3)
50/65
J
100/60
Integral
75°C Cu
14-10, 31.1 (3.5)
12, 31.1 (3.5)
14-1, 31.1 (3.5)
10-6, 31.1 (3.5)
50/65
J
100/60
Integral
75°C Cu
14-10, 31.1 (3.5)
12, 31.1 (3.5)
14-1, 31.1 (3.5)
10-6, 31.1 (3.5)
10,000
10,000
10,000
10,000
10,000
0.7 (0.32)
0.7 (0.32)
0.5 (0.2)
Direct
Short selector/NEMA 1, 3R, 4,
4X, 12
Handles
RD16-3-508 with 6-pole conversion kit
Metallic hasp (HD) pistol handle/
NEMA 1, 3R, 4, 4X, 12
5.9"/150mm
7.9"/200mm
12.6"/320mm
7.9"/200mm
12.6"/320mm
15.75"/400mm
Selector handle shaft guide
Pistol handle shaft guide
Door mount kit
1-Pole
3-Pole (loadside and lineside)
Switched 4th pole/switch amps
Shrouds/switch amps
Ground module (conforms to IEC
60947-3)
Neutral module (conforms to IEC
60947-3)
NO + NC (1 ea.)
(2) NO
AC ratings
Auxiliary contacts
Volts
Amps
6-/8-pole conversion kit gangs two switches of same rating, 16-80 A
switch amps
See drawings on product pages
0.5 (0.2)
0.5 (0.2)
-20 to 70°C
UL 94-V0
-20 to 70°C
UL 94-V0
-20 to 70°C
UL 94-V0
-20 to 70°C
UL 94-V0
-20 to 70°C
UL 94-V0
DIR-01
H4X-01B
H4X-01R
H4X-02B
H4X-02R
H4X-03B
H4X-03R
H4X-03BHD
H4X-03RHD
SH4-150
SH4-200
SH4-320
SH3-200
SH3-320
SH3-400
SH-GUIDE1
SH-GUIDE2
DOOR-508
TSH1-1TB
TSH1-3TB
POLE-16
DIR-01
H4X-01B
H4X-01R
H4X-02B
H4X-02R
H4X-03B
H4X-03R
H4X-03BHD
H4X-03RHD
SH4-150
SH4-200
SH4-320
SH3-200
SH3-320
SH3-400
SH-GUIDE1
SH-GUIDE2
DOOR-508
TSH1-1TB
TSH1-3TB
POLE-25
DIR-01
H4X-01B
H4X-01R
H4X-02B
H4X-02R
H4X-03B
H4X-03R
H4X-03BHD
H4X-03RHD
SH4-150
SH4-200
SH4-320
SH3-200
SH3-320
SH3-400
SH-GUIDE1
SH-GUIDE2
DOOR-508
TSH1-1TB
TSH1-3TB
POLE-40
DIR-01
H4X-01B
H4X-01R
H4X-02B
H4X-02R
H4X-03B
H4X-03R
H4X-03BHD
H4X-03RHD
SH4-150
SH4-200
SH4-320
SH3-200
SH3-320
SH3-400
SH-GUIDE1
SH-GUIDE2
DOOR-508
—
TSH2-3TB
—
DIR-01
H4X-01B
H4X-01R
H4X-02B
H4X-02R
H4X-03B
H4X-03R
H4X-03BHD
H4X-03RHD
SH4-150
SH4-200
SH4-320
SH3-200
SH3-320
SH3-400
SH-GUIDE1
SH-GUIDE2
DOOR-508
—
TSH2-3TB
—
GND-16-40
GND-16-40
GND-16-40
GND-63-80
GND-63-80
NTRL-16-40
NTRL-16-40
NTRL-16-40
NTRL-63-80
NTRL-63-80
BAC01
BAC02
BAC01
BAC02
BAC01
BAC02
BAC01
BAC02
BAC01
BAC02
240 Vac
10
KIT-6POLE
240 Vac
10
KIT-6POLE
240 Vac
10
KIT-6POLE
240 Vac
10
KIT-6POLE
240 Vac
10
KIT-6POLE
— Not available.
11-80
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
UL 508 non-fused rotary disconnect switches —16, 25, 40, 63 and 80 A
For a complete assembly, select:
Switch
Poles
40
3
63
80
Max. Class
J fuse
amps
65
30
10
65
50
65
50
65
60
30
100
60
100
60
Max horsepower rating, 3-Phase
208
3
7.5
220/240
5
7.5
440/480
10
15
600
10
20
7.5
7.5
20
25
15
20
40
40
15
20
40
40
PLUS
Direct mount handle - mounts directly to switch, no shaft required
For switch cat. no.
Color
Test function
All switches
2
Or
Handles
Select for standard application
1
+
1
2
+
14-10 Sol, Dual 12
Sol, 14-1 Str, Dual
10-6 Str, 75°C Cu
Padlockable
N
Y - On Switch
OR
External front or right side operated selector handles - shaft required
NEMA type
Color
Handle length
Test function
Padlockable
Black
Short
Red/yellow
1, 3R, 4, 4X, 12
N
Y
Black
Long
Red/yellow
External front operated pistol handles - shaft required
NEMA type
Color
Handle length
Test function
Padlockable
Defeatable
Black
1, 3R, 4, 4X, 12
—
N
Y
Y
Red/yellow
Metallic hasp (heavy duty) external front operated pistol handles - shaft required
NEMA type
Color
Handle length
Test function
Padlockable
Defeatable
Black
1, 3R, 4, 4X, 12
—
N
Y
Y
Red/yellow
Shafts for selector handles
Length — in (mm)
Mounting depth (X) - in (mm)
5.9 (150)
3.50~7.60 (89~193)
7.9 (200)
3.50~9.50 (89~241)
12.6 (320)
3.50~14.9 (89~378)
Shafts for pistol handles
Length — in (mm)
Mounting depth (X) - in (mm)
7.9 (200)
3.30~7.40 (84~188)
12.6 (320)
3.30~9.30 (84~236)
15.7 (400)
3.30~14.7 (84~373)
Shaft guides for selector and pistol handles
Handle type
Selector
Required for 12.6" (320mm) long shafts, optional for other lengths
Pistol
+
Black
Conductor AWG size/
type
Catalog no.
RD16-3-508
14-10 Sol, Dual 12
RD25-3-508
Sol, 14-4 Str, Dual
14-12 Str, 75°C Cu
RD40-3-508
Required for 15.7" (400mm) long shafts, optional for other lengths
RD63-3-508
RD80-3-508
Catalog no.
DIR-01
Catalog no.
H4X-01B (1)
H4X-01R (1)
H4X-02B (2)
H4X-02R (2)
Catalog no.
H4X-03B
H4X-03R
Catalog no.
H4X-03BHD
H4X-03RHD
Catalog no.
SH4-150 (1)
SH4-200 (1)
SH4-320 (1)
Catalog no.
SH3-200 (2)
SH3-320 (2)
SH3-400 (2)
Catalog no.
SH-GUIDE1
SH-GUIDE2
Door mount kit
For mounting switch on the right side of the enclosure or directly on the enclosure door using switch side operation shaft location. Kit
includes a shaft. Order switch and selector handle separately.
Switch
Catalog no.
All switches - kit includes shaft
DOOR-508
AND...
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-81
Disconnect
switches
Switch
Amps
16
25
SCCR @600V
(kA)
11 — Disconnect switches
Aux.Contacts
Auxiliary contacts
NO + NC
NO
Continuous amp
rating
Voltage (Vac) rating
Max number of units per switch
Shrouds
4th pole
Catalog no.
BAC01
10
2
240
2 (1 per side/4 contacts total)
AND...
Terminal shrouds - includes terminal shroud for both lineside and loadside
Switch
Poles
amps
16-40
1 (for switched 4th pole)
16-40
3
63-80
AND...
Switched 4th pole - converts 3-pole switch to 4-pole switch
Switch amps
Gnd./neut. mods
BAC02
Location on switch
Catalog no.
Lineside and loadside
TSH1-1TB
TSH1-3TB
TSH2-3TB
Catalog no.
16
POLE-16
25
POLE-25
40
POLE-40
AND...
Ground and Neutral Modules - provides unswitched ground or neutral pole - conforms to IEC 60947-3
Switch amps
Module Type
Catalog no.
16-40
GND-16-40
Ground
63-80
16-40
GND-63-80
NTRL-16-40
Neutral
63-80
NTRL-63-80
Ground and neutral module, and
switched 4th pole configurations.
N or G
N or G
N or G
Auxiliary contact
configurations
N or G
Order switches separately
N or G
6 pole kit
AND...
6-pole conversion kit - creates a 6-pole switch by ganging two 3-pole switches of equal rating
Switch amps
Catalog no.
All switches
KIT-6POLE*
* Kit ships with a direct handle. If external handle is needed order a selector handle and shaft for the UL 508 Rotary Disconnect
Switches.
Note: To create an 8-pole switch from 16 to 40 amp switches, use two 3-pole switches of equal ratings plus two switched 4th poles
(part # POLE-_).
N or G
Accessories
No. of
contacts
1 Ea.
Contact type
Dimensions — in (mm)
1
1.97
50
0.24
6
0.35
8.8
2
F
3.19
81
2.52
64
1.99
50.6
F1
M5
T
F1
2
1
J
1
G
2.68
68
0.35
8.8
0.35
8.8
0.23
6
1.96
50
Direct handle operation
D
M
N
AC
G
2.67
68
2
F
M
1
E
F1
F1
T
1.42
36
2
ø 2.79
ø 71
1.42
36
N
AC
2.95
75
2.52
64
0.35
8.8
M5
External front operation
External side operation
1. Position for 1 switched 4th pole (1 per device max.), or ground or neutral module (2 per device max.) or 1 auxiliary contact.
2. Position for 1 auxiliary contact only.
Note: Maximum of 4 Auxiliary contacts, or 3 Auxiliary contacts + one ground or neutral module, or one switched 4th pole.
Switch
amps
16 to 40
63 to 80
11-82
Overall dimensions
D min
D max
E min
E max
1.18 (30) 9.25 (235) 3.94 (100) 14.64 (372)
1.18 (30) 9.25 (235) 3.93 (100) 14.64 (372)
Terminal
shroud AC
4.33 (110)
4.33 (110)
Switch body
F
1.77 (45)
2.06 (53)
F1
0.59 (15)
0.69 (18)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
G
2.67 (68)
2.99 (76)
Switch mounting
J
0.59 (15)
0.69 (18)
M
1.18 (30)
1.38 (35)
N
2.95 (75)
3.35 (85)
Eaton.com/bussmannseries
Connection T
0.59 (15)
0.69 (18)
Disconnect switches — 11
Dimensions — in (mm)
2
1.77
45
0.35 F1
T T
8.8
2.06
52.5
F1 0.35
8.8
0.29
7.5
0.24
6
1.69
43
1
1.36
34.7
0.35 F1
T T
8.8
2.06
52.5
Direct front operation for 6/8-pole disconnects
1
2.06
52.5
E
2
1.42
36
0.29
7.5
Disconnect
switches
2
ø 2.79
ø 71
1
2.06
52.5
F
J
F2
X M
N
G
2.67
68
1
3.50
89
3.07
78
N
G
2.67
68
2
F
J
F2
X M
F1 0.35
8.8
External front operation for 6/8-pole disconnects
1. Position for 1 switched 4th pole (1 per device max.) or 1 auxiliary contact.
2. Position for 1 auxiliary contact only.
Note: Maximum of 4 auxiliary contacts, or 3 auxiliary contacts + one switched 4th pole.
Overall dimensions
Switch body
Switch mounting
Connection
Switch
amps
E min
E max
F
F1
F2
G
J
M
N
T
X
16 to 40
4.13 (105)
14.64 (372)
3.83 (98)
0.59 (15)
1.77 (45)
2.67 (68)
1.92 (48.75)
1.18 (30)
2.95 (75)
0.59 (15)
0.29 (8)
63 to 80
4.13 (105)
14.65 (372)
4.13 (105)
0.69 (18)
2.06 (53)
2.99 (76)
2.06 (52.5)
1.38 (35)
3.35 (85)
0.69 (18)
0.34 (9)
External selector and pistol handles
Handle type
Door drilling layouts
Ø3.07
Ø78
Direction of
front operation
1.42
36
I
°
3.46
88
Selector
H4X-02_
I
°
90
Ø3.07
Ø78
90
Ø 1.22
Ø 31
0
0.11
3
4 Ø 0.27
4Ø7
Direction of
right side operation
0.53
13.5
Selector
H4X-01_
1.10
28
2.79
71
1.57
40
0
Ø 0.88
Ø 22.5
With 4 Mounting Screws
1.45
37
With mounting nut
1.57
40
1.10
28
4 Ø 0.27
4Ø7
Pistol
H4X-03_
H4X-03_ with 4 mounting screws
Ø 1.45in/37mm screw clip (from front)
Ø 1.22in/31mm screw (from rear)
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-83
11 — Disconnect switches
UL 98 and UL 508 enclosed disconnect switches
Enclosed fused and non-fused rotary disconnect switches from 16 to
1200 A in NEMA 1, 3R, 4, 4X, 12 enclosures.
Ratings
•
Volts
•
600 Vac
•
250-600 Vdc*
•
Amps 16-1200 A
•
SCCR
2011/65/EU
•
UL 98 25-200 kA
•
UL 508 10-65 kA
NEMA 1, 3R, 4 and 12
* Some non-fused disconnect switches are not rated for DC applications.
Agency information
•
UL 98 Listed, Guide WIAX, WIAX7, File E182262
•
UL 508 Listed, Guide NLRV, NLRV, File E155129
•
cULus Listed to Canadian Standard 22.2, No. 14
•
cULus Listed to Canadian Standard 22.2, No. 4
•
Conforms with IEC 60947-3
•
RoHS compliant
•
CE
Operating temperature
•
NEMA 4X 304 stainless steel
-20ºC to 70ºC
4X plastic enclosure flammability ratings
•
Polycarbonate UL 94-5V A-0
•
Fiberglass UL 94-5V
Field installed accessories
•
Auxiliary contacts
•
Terminal shrouds
•
Switched 4th pole (UL 508 only)
NEMA 4X polycarbonate or fiberglass
Online resources
Visit Eaton.com/bussmannseries for:
•
CAD drawings
•
Instruction sheets
•
UL information
Features
•
UL 98 Listed for general purpose, main disconnect, or branch
circuit protection up to 600 Vac/dc
•
UL 508 Listed for motor disconnect applications up to 600 Vac
•
Multiple field installed accessories enhance the enclosed
disconnect switches to fit the desired application
•
Lockout/tagout: Up to three 1/4" shank padlocks can be installed
on external handles
11-84
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
UL 98 enclosed fused disconnects — 30 to 800 A
3-pole UL 98 600 Vac
Catalog number system:
ER 4X
-
60
J
3
P
B
ER
Enclosed Rotary disconnect
NEMA 1, 3R, 4 and 12
1, 3R, 4, 4X (304 SST), 4P (4X Plastic), 12
NEMA 4X
304 stainless steel
NEMA 4X
Disconnect
switches
NEMA rating
30-800A UL 98 fused switches
Amp rating
30, 60, 100, 200, 400, 600, 800
Fuse class
Available Bussmann series fuses
J = Class J, L = Class L
Fuse class
Number of poles
3 = 3-pole
Catalog symbol/type
LPJ time-delay, current limiting
JKS fast-acting fuses
DFJ high speed drive fuse
KRP-C time-delay, current limiting
KTU fast-acting
KLU time-delay
KRP-CL (225-600 A)
J
Handle type
P = Pistol
Handle color
L
B = Black, R = Red
Catalog numbers
All catalog numbers provided with integral or installed lugs and a
black selector handle. Order Red/yellow handle by changing the
suffix “B” to “R.”
Switch amps
30
60
100
200
400
600
800
Fuse class
J
L
NEMA enclosure type and catalog no.
1
3R
ER1-30J3PB
ER3R-30J3PB
ER1-60J3PB
ER3R-60J3PB
ER1-100J3PB
ER3R-100J3PB
ER1-200J3PB
ER3R-200J3PB
ER1-400J3PB
ER3R-400J3PB
ER1-600J3PB
ER3R-600J3PB
ER1-800L3PB
ER3R-800L3PB
4
ER4-30J3PB
ER4-60J3PB
ER4-100J3PB
ER4-200J3PB
ER4-400J3PB
ER4-600J3PB
ER4-800L3PB
4X plastic1
ER4P-30J3PB
ER4P-60J3PB
ER4P-100J3PB
ER4P-200J3PB
ER4P-400J3PB
ER4P-600J3PB
ER4P-800L3PB
4X 304 stainless
ER4X-30J3PB
ER4X-60J3PB
ER4X-100J3PB
ER4X-200J3PB
ER4X-400J3PB
ER4X-600J3PB
ER4X-800L3PB
12
ER12-30J3PB
ER12-60J3PB
ER12-100J3PB
ER12-200J3PB
ER12-400J3PB
ER12-600J3PB
ER12-800L3PB
1 Enclosures ≤100 A are polycarbonate, flammability rating UL 94-5V A-V0, ≥200 A
are fiberglass, flammability rating UL 94-5V.
Switch ratings
For wire types, ranges and terminal torques, see table on page 11-55.
Voltage
Switch amps
30
60
100
200
400
600
Switch cat. no.
RDF30J-3
RDF60J-3
RDF100J-3
RDF200J-3
RDF400J-3
RDF600J-3
Fuse class
800
RDF800L-3
L
Poles
Vac
Vdc
SCCR @ Vac (kA)
250
J
3
600
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
N/A
250
200
Max. Hp @ 600 Vac
20
50
75
150
350
600
Eaton.com/bussmannseries
500
11-85
11 — Disconnect switches
UL 98 enclosed fused disconnects — 30 to 800 A
W
Enclosure weights and dimensions
Catalog no.
family
Amps
ER_-30J
30
ER_-60J
60
ER_-100J
Fuse
class
100
J
ER_-200J
ER_-400J
ER_-600J
ER_-800L
200
400
600
800
L
NEMA
enclosure
1, 3R, 4, 12
4X-SST
4X-plastic 1
1, 3R, 4, 12
4X-SST
4X-plastic 1
1, 3R, 4, 12
4X-SST
4X-plastic 1
1, 3R, 4, 12
4X-SST
4X-plastic 1
1, 3R, 4, 12
4X-SST
4X-plastic 1
1, 3R, 4, 12
4X-SST
4X-plastic 1
1, 3R, 4, 12
4X-SST
4X-plastic 1
H x W x D (in)
10x10x6
12x10x6
13x13x6
14x12x6
13x13x6
24x20x8
27x21x10
48x36x12
51x37x14
48x36x12
51x37x14
48x36x12
51x37x14
A
8.3x8.3
—
—
10.3x8.3
—
—
12.3x10.3
—
—
22.3x18.3
—
—
46.3x34.3
—
—
46.3x34.3
—
—
46.3x34.3
—
—
Mounting centers h x w (in)
B
C
Weight (lbs)
—
—
15
10.7x8.3
8.3x10.7
12x5.6
7.6x10
8
—
—
19
12.7x8.3
8.3x10.7
14x7.6
9.6x12
11
—
—
21
14.7x10.3
12.3x12.7
14x7.6
9.6x12
12
—
—
55
24.7x18.3
22.3x20.7
25.75x14
—
39
—
—
188
48.7x34.3
46.3x36.7
50x28.5
—
186
—
—
216
48.7x34.3
46.3x36.7
50x28.5
—
214
—
—
216
48.7x34.3
46.3x36.7
50x28.5
—
214
1 Enclosures ≤100 A are polycarbonate, flammability rating UL 94-5V A-V0, ≥200 A
are fiberglass, flammability rating UL 94-5V.
A
MW
W
B
W
Auxiliary contacts - for 30 to 800 amp switches
Contact type
No. of contacts
NO
1
NC
Cont. amp rating
10
Vac
600
Max. units per switch
Catalog no.
4 (30 to 200 A)
BAC05
8 (400 to 800 A)
BAC06
MW
Terminal shrouds
For 200 to 800 amp switches - includes terminal shroud for lineside
or loadside
Switch amps
200
400
600-800
11-86
Poles
3
Catalog no.
TSH8-3TB
TSH9-3TB
TSH10-3TB
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
H MH
MW
C
Available field-Installed accessories - order separately
MH H
Eaton.com/bussmannseries
MH H
Disconnect switches — 11
UL 98 enclosed non-fused disconnects —
30 to 1200 A
3-pole UL 98 600 Vac
Catalog number system:
ER 4X
-
60
N
3
P
B
ER
NEMA 1, 3R, 4 and 12
Enclosed Rotary disconnect
NEMA 4X
304 stainless steel
NEMA 4X
Disconnect
switches
200-1200A UL 98 non-fused switches
NEMA rating
1, 3R, 4, 4X (304 SST), 4P (4X Plastic), 12
Amp rating
30, 60, 100, 200, 400, 600, 800, 1200
N = non-fused
Number of poles
3 = 3-pole
Handle type
NEMA 1, 3R, 4 and 12
P = Pistol
NEMA 4X
304 stainless steel
NEMA 4X
30-800A UL 98 non-fused switches
Handle color
B = Black, R = Red
Catalog numbers
All Catalog numbers provided with integral or installed lugs and a black
selector handle. Order Red/yellow handle by changing the suffix “B” to
“R.”
Amps
30
60
100
200
400
600
800
1200
1
ER1-30N3PB
ER1-60N3PB
ER1-100N3PB
ER1-200N3PB
ER1-400N3PB
ER1-600N3PB
ER1-800N3PB
ER1-1200N3PB
3R
ER3R-30N3PB
ER3R-60N3PB
ER3R-100N3PB
ER3R-200N3PB
ER3R-400N3PB
ER3R-600N3PB
ER3R-800N3PB
ER3R-1200N3PB
NEMA enclosure type and catalog no.
4
4X plastic 1
ER4-30N3PB
ER4P-30N3PB
ER4-60N3PB
ER4P-60N3PB
ER4-100N3PB
ER4P-100N3PB
ER4-200N3PB
ER4P-200N3PB
ER4-400N3PB
ER4P-400N3PB
ER4-600N3PB
ER4P-600N3PB
ER4-800N3PB
ER4P-800N3PB
ER4-1200N3PB
N/ A
4X 304 stainless
ER4X-30N3PB
ER4X-60N3PB
ER4X-100N3PB
ER4X-200N3PB
ER4X-400N3PB
ER4X-600N3PB
ER4X-800N3PB
ER4X-1200N3PB
12
ER12-30N3PB
ER12-60N3PB
ER12-100N3PB
ER12-200N3PB
ER12-400N3PB
ER12-600N3PB
ER12-800N3PB
ER12-1200N3PB
1 Enclosures ≤100 A are polycarbonate, flammability rating UL 94-5V A-V0, ≥200 A
are fiberglass, flammability rating UL 94-5V.
Switch ratings
For wire types, ranges and terminal torques, see table on page 11-72.
Amps Switch catalog no.
30
RD30-3
60
RD60-3
100
RD100-3
200
RD200-3
400
RD400-3
600
RD600-3
800
RD800-3
1200
RD1200-3
Poles
Vac
SCCR (kA)
100
25/100*
3
600
Max. Hp @ 600 Vac
25
50
200
200
100
350
500
* 25 kA @ 600 Vac, 100 kA @ 480 Vac.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-87
11 — Disconnect switches
UL 98 enclosed non-fused disconnects —
30 to 1200 A
W
Enclosure weights and dimensions
Catalog
no. family
ER_-30
ER_-60
ER_-100
ER_-200
ER_-400
ER_-600
ER_-800
ER_-1200
Amps
30
60
100
200
400
600
800
1200
NEMA
enclosure
1, 3R, 4, 12
4X-SST
4X-plastic (1)
1, 3R, 4, 12
4X-SST
4X-plastic (1)
1, 3R, 4, 12
4X-SST
4X-plastic (1)
1, 3R, 4, 12
4X-SST
4X-plastic (1)
1, 3R, 4, 12
4X-SST
4X-plastic (1)
1, 3R, 4, 12
4X-SST
4X-plastic (1)
1, 3R, 4, 12
4X-SST
4X-plastic (1)
1, 3R, 4, 12
4X-SST
H x W x D (in)
10x8x6
9x9x6
10x8x6
9x9x6
12x10x6
13x13x6
20x16x8
20x17x12
36x30x8
37x32x14
48x36x12
51x37x 14
48x36x12
51x37x 14
60x36x16
60x36x16
Mounting centers h
A
B
8.3x6.3
—
—
10.7x6.3
—
10x3.6
8.3x6.3
—
—
10.7x6.3
—
10x3.6
10.3x8.3
—
—
12.7x8.3
—
14x7.6
18.3x14.3
—
—
20.7x14.3
—
21.5x10.1
34.3x28.3
—
—
36.7x28.3
—
38x28.9
46.3x34.3
—
—
48.7x34.3
—
50x28.5
46.3x34.3
—
—
48.7x34.3
—
50x28.5
58.3x34.3
—
—
60.7x34.3
x w (in)
C
—
8.3x8.7
5.6x8
—
8.3x8.7
5.6x8
—
8.3x10.7
9.6x12
—
18.3x16.7
—
34.3x30.7
—
—
46.3x36.7
—
—
46.3x36.7
—
—
58.3x36.7
A
Weight (lbs)
11
11
5
12
12
5
12
12
8
39
39
31
122
122
103
209
209
187
211
211
189
268
268
MH H
MW
W
B
H MH
MW
W
C
MH H
MW
1 Enclosures ≤100 A are polycarbonate, flammability rating UL 94-5V A-V0, ≥200 A are fiberglass, flammability rating UL 94-5V.
Available field-installed accessories - order separately
Auxiliary contacts for 30 to 1200 amp switches.
Switch amps
30-100
200-1200
Contact type
NO + NC
NO
NO + NC
NO + NC
NO + NC
NO + NC
No. of contacts
1 of each
2
1 of each
1 of each
1 of each
1 of each
Cont. amp rating
Vac
10
240
10.1
125-250
1
125
Max. units per switch Catalog no.
BAC01*
4
BAC02*
BAC03**
BAC04**
2
BAC11**
BAC12**
* Two (2) Units per switch max.
** For one auxiliary contact, install either BAC03 or BAC11. For two auxiliary contacts, install BAC03 + BAC04, or BAC11 + BAC12.
Terminal shrouds for 200 to 800 amp switches
Switch amps
30-100
Poles
200
400
600
800-1200
11-88
3
Location on switch
Lineside and loadside
Lineside
Loadside
Lineside
Loadside
Lineside or loadside
Catalog no.
TSH3-3TB
TSH4-3T
TSH4-3B
TSH5-3T
TSH5-3B
TSH6-3TB
TSH7-3TB
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Disconnect switches — 11
UL 508 enclosed non-fused disconnect — 16 to 80 A
3-/6-pole UL 508 600 Vac
Catalog number system:
ER 4X
-
63
N
6
P
B
ER
Enclosed Rotary disconnect
NEMA 1, 3R, 4 and 12
1, 3R, 4, 4X (304 SST), 4P (4X Plastic), 12
NEMA 4X
304 stainless steel
NEMA 4X
Disconnect
switches
NEMA rating
16-80 A UL 508 non-fused switches
Amp rating
16, 25, 40, 63, 80
N = non-fused
Number of poles
3 = 3-pole, 6 = 6-pole
Handle type
S = Selector*, P = Pistol**
Handle color
B = Black, R = Red
* 6-Pole switches only, selector handle does not interlock the enclosure door.
** 3-pole switches only.
Catalog numbers
All catalog numbers provided with a black selector handle. Order red/
yellow handle by changing the suffix “B” to “R.”
Amps
16
25
40
63
80
Poles
3
6
3
6
3
6
3
6
3
6
1
ER1-16N3PB
ER1-16N6SB
ER1-25N3PB
ER1-25N6SB
ER1-40N3PB
ER1-40N6SB
ER1-63N3PB
ER1-63N6SB
ER1-80N3PB
ER1-80N6SB
3R
ER3R-16N3PB
ER3R-16N6SB
ER3R-25N3PB
ER3R-25N6SB
ER3R-40N3PB
ER3R-40N6SB
ER3R-63N3PB
ER3R-63N6SB
ER3R-80N3PB
ER3R-80N6SB
NEMA enclosure and catalog no.
4
4X plastic 1
ER4-16N3PB
ER4P-16N3PB
ER4-16N6SB
ER4P-16N6SB
ER4-25N3PB
ER4P-25N3PB
ER4-25N6SB
ER4P-25N6SB
ER4-40N3PB
ER4P-40N3PB
ER4-40N6SB
ER4P-40N6SB
ER4-63N3PB
ER4P-63N3PB
ER4-63N6SB
ER4P-63N6SB
ER4-80N3PB
ER4P-80N3PB
ER4-80N6SB
ER4P-80N6SB
4X 304 stainless
ER4X-16N3PB
ER4X-16N6SB
ER4X-25N3PB
ER4X-25N6SB
ER4X-40N3PB
ER4X-40N6SB
ER4X-63N3PB
ER4X-63N6SB
ER4X-80N3PB
ER4X-80N6SB
12
ER12-16N3PB
ER12-16N6SB
ER12-25N3PB
ER12-25N6SB
ER12-40N3PB
ER12-40N6SB
ER12-63N3PB
ER12-63N6SB
ER12-80N3PB
ER12-80N6SB
1 Polycarbonate enclosure flammability rating UL 94-5V A-V0.
Switch ratings
For wire types, ranges and terminal torques, see table on page 11-80.
Amps
16
25
40
63
80
Switch catalog no.
RD16-3-508
RD25-3-508
RD40-3-508
RD63-3-508
RD80-3-508
Vac
SCCR with max upstream Class J fuse
65 kA /30 A
600
65 kA /30 A — 10 kA / 60 A
65 kA /60 A — 50 kA / 100 A
50 kA / 100 A
Max. Hp @ 600 V
10
20
25
40
40
Note: Voltage, SCCR and horsepower ratings are the same for 3- and 6-pole switches.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
11-89
11 — Disconnect switches
UL 508 enclosed non-fused disconnect — 16 to 80 A
W
Enclosure weights and dimensions
NEMA
enclosure
1, 3R, 4, 12
4X-304 SST
4X-plastic
Poles
3
6
3
6
3
1
6
Switch
amps
H x W x D (in)
8x6x6
10x8x6
8x6x6
10x8x6
7.4x8.7x5.8
9.4x8.7x5.9
11.4x10.7x6.3
16-80
16-63
80
16-8 A
A
6.3x4.3
8.3x6.3
—
—
—
—
—
Mounting centers h x w (in)
B
C
Weight (lbs)
—
—
8
—
—
11
8.7x4.3
6.3x6.7
8
10.7x6.3
8.3x8.7
11
8x3.6
3.6x8
4
10x3.6
5.6x8
5
12x5.6
7.6x10
6
A
MH H
MW
W
1 Polycarbonate.
B
Available field-installed accessories - order separately
H MH
Auxiliary contacts
Contact type
NO + NC
NO
Cont.
No. of
amp
contacts rating
1 Ea.
10
2
MW
Vac
Max. units per switch
240
2 (1 per side, 4 contacts total)
Auxiliary contact
configurations
Catalog no.
BAC01
BAC02
W
C
Terminal shrouds
MW
Includes terminal shroud for both lineside and loadside.
Switch amps
16-40
63-80
Poles
Location on switch
3
Lineside and loadside
Catalog no.
TSH1-3TB
TSH2-3TB
Switched 4th pole
Converts 3-pole switch to 4-pole switch.
Switch amps
11-90
Catalog no.
16
POLE-16
25
POLE-25
40
POLE-40
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
MH H
Quik-Spec™ electrical gear — 12
Contents
Section
page
Description
Quik-Spec™ Coordination Panelboards
TM
Bussmann series Quik-Spec
Coordination Panelboard
QSCP Up to 400 A
2
QSCP 600 to 1200 A
3
Quik-Spec elevator disconnects
Power Module™ switches and panels
4-5
HVAC disconnects
6
Quik-Spec
Electrical gear
Fused, non-fused, GFCI
Up to 200 kA SCCR in 40% less
space than traditional solutions
Plus, the easiest way to achieve
selective coordination
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
12-1
12 — Quik-Spec™ electrical gear
30-400A Quik-Spec™ Coordination Panelboard (QSCP)
Configurable 600 Vac fused panelboard with from 30 to 400 amp
mains, 15 to 100 amp 1-, 2- and 3-pole branch switches and 18,
30 or 42 branch circuit positions. Finger-safe fused branch circuit
switches use the time-delay or fast-acting CUBEFuse available in
ratings from 1 to 100 amps.
Ratings
•
Volts
•
Up to 600 Vac
•
Up to 125 Vdc *
•
Amps 30, 60, 100, 200, 225 or 400 A
•
SCCR
•
200 kA, 100 kA or 50 kA AC
•
100 kA or 20 kA@125 Vdc*
* Vdc rating applicable to MLO panels only. 50 and 60 amp switches are rated 125
Vdc for installed fuse amp ratings up to 40 A and 24 Vdc for installed fuse amp
ratings from 45 to 60 A. 90 and 100 amp switches are rated 125 Vdc for installed
fuse amp ratings up to 80 A and 24 Vdc for installed fuse amp ratings from 90 to
100 A.
Agency information
•
UL Listed to UL 67
•
Complies with NFPA 70
Mains
CCP2B 3-pole branch
switch features lockout
provision for 1/4" lock
Loadside lugs and disconnect
•
Feed-through single and double
•
Fused loadside disconnect, ≥100 to ≤200 amp (400 amp panels
only)
Neutrals
•
•
MLO (main lug only)
•
Fused disconnect
•
Non-fused disconnect
Ground
•
Enclosure**
•
NEMA 1 (top or bottom feed)
•
NEMA 3R (bottom feed only)
•
Consult factory for other ratings
** Standard size 20" W x 5" D x various heights, depending on configuration. Flush
mount and door-in-door not available with NEMA 3R enclosure.
Surface – NEMA 1 and 3R
•
Flush – NEMA 1 only
•
UL Listed and cULus to Canadian Standard 22.2, No. 29-M1989
make it easy to address NEC and CEC selective coordination
requirements in an all fused system or upstream Eaton circuit
breakers
•
Value-engineered for greater flexibility with up to 400 amp mains,
200 kA SCCR, 100 A branches with 18, 30 and 42 branch positions
•
Same size footprint as traditional circuit breaker panelboards and
40% smaller than standard fusible panelboards: 20" W x 5-3/4" D x
various heights (depending on configuration)
•
Increased safety with the current-limiting finger-safe Class CF
CUBEFuse that helps reduce arc flash hazard levels
Optional surge protection
Doors
•
Single - NEMA 1 and 3R
•
Door-in-Door – NEMA 1 only
Branch positions
•
Non-isolated or isolated
Features
Mounting
•
200, 400 and 800 A unbonded and bonded
18, 30 and 42 (factory configured)
2017 NEC 700.8 requires a listed SPD to be installed in or on all
emergency system panelboards.
Any QSCP intended for installation on an AC circuit can be ordered
with an Surge Protective Device to comply with NEC 700.8.
The installed SPDs feature a remote Form C contact relay (rated at
250 Vac/0.5 A ) for easy integration into a monitoring system.
Ordering
Branch switches
•
1-, 2- and 3-pole amp rating rejecting CCP2B fused switches† (field
installable)
•
Amp rejection breaks 15, 20, 30, 40, 50, 60, 70, 90, 100 A
The QSCP is factory configured to the specific electrical system. To
place your order, contact your Bussmann series product distributor
or representative and provide the relevant electrical and circuit
information for your installation.
† CCP2Bs will not accept a fuse with a greater amp rating than the switch.
Data sheet no. 1160
12-2
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Quik-Spec™ electrical gear — 12
600-1200A Quik-Spec Coordination Panelboard (QSCP)
Configurable fused panelboard with 600, 800 and 1200 amp MLO
mains and branch switches up to 600 amps.
Ratings
•
Volts
•
Up to 600 Vac
•
Up to 125 Vdc
•
Amps 600, 800, 1200 A
•
SCCR 200 kA
•
UL Listed to UL 67
•
Complies with NFPA 70
Quik-Spec
Electrical gear
Agency information
Assembly
•
Main lug only
•
Floor mount NEMA 1 enclosure
•
Branch switches 1-, 2- and 3-pole, 15 to 600 A
Available branch switch fuses
•
Fast-acting or time-delay Class J (time-delay LPJ or fast-acting
JKS) non-CCP2B disconnects only
•
High speed DFJ Class J fuses (non-CCPB disconnects only)
•
Fast-acting or time-delay Class CF (time-delay TCF or fast-acting
FCF) CCP2B disconnects only
Configuration and dimensions — in
Panel
amps
•
•
600
D
200 A single + 200 A single
65
27
15
89
38
15
65
38
15
89
38
15
89
38
15
102
38
15
200 A single + 200 A twin
200 A twin + 200 A twin
The CCP2B finger-safe branch switches (utilizing the UL Class
CF CUBEFuse up to 100 A) features amp rating rejection to help
prevent overfusing
Fused switches make it simple to address NEC selective
coordination system requirements in an all fused system or qwith
upstream Eaton circuit breakers.
W
(18) 1-100 A + 200 A single
(18) 1-100 A + 200 A twin
Configurable panelboards with options for 600, 800 and 1200 A
MLO mains and branches from 15-600 A all rated 200 kA SCCR at
600 Vac
H
(18) 1-100 A
Features
•
Branch configurations
(2) 300 A single
(18) 1-100 A + 200 A single
(18) 1-100 A + 200 A twin
800
Ordering
(2) 200 A twin
(18) 1-100 A + 400 A single
200 A twin + 400 A single
(2) 400 A single
The QSCP is factory configured to the specific electrical system. To
place your order, contact your Bussmann series product distributor
or representative and provide the relevant electrical and circuit
information for your installation.
(18) 1-100 A + 600 A single
(3) 200 A twin
200 A twin + 600 A single
1200
(2) 200 A twin + 400 A single
(3) 400 A single
600 A single + 400 A single + 200 A single
600 A single + 400 A single + 200 A twin
(2) 600 A single
Data sheet no. 1171
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
12-3
12 — Quik-Spec™ electrical gear
Quik-Spec Power Module switch and panel
all-in-one elevator disconnects
Fused power switch (PS) or panel (PMP) with shunt trip and fire
safety interface provide a single point tie in with fire alarm systems.
Ratings
•
Volts 600 Vac, 3Ø
•
Amps*
•
•
30-400 A (PS)
•
30-200 A (PMP feeder switches)
•
400-800 A (PMP main switches)
PS† Power Module Switch for single elevator applications.
SCCR 200 kA RMS
* Contact your Bussmann series product representative for applications greater
than 800 amps.
Agency information
•
Power Module switch (PS) — UL Listed (UL 98) enclosed and
dead front switch Guide 96NK3917, File E182262, NEMA 1, UL
50 Listed enclosure**, cUL per Canadian Standards C22.2, No.
0-M91-CAN/CSA C22.2, No. 4-M89 Enclosed switch.
•
Power Module Panel (PMP) — UL 98 enclosed and deadfront
switches, complies with NFPA 70
** NEMA 12, 3R, and 4 enclosures also available.
Elevator shutdown
•
ANSI/ASME A17.1, 2.8.3.3.2
•
NEC 620.51(B) (elevator shutdown)
•
NEC 240.12 (orderly shutdown)
•
Shunt trip voltage monitoring
•
NFPA 72, 6.16.4.4
Selective coordination
•
PMP† Power Module Panel for multiple elevator applications.
NEC 620.62
† Fused main disconnect requires Class J fuses, not supplied with switch.
Auxiliary contact (hydraulic elevator)
•
NEC 620.91(C)
Features
Typical applications
•
Elevator disconnects
•
Computer room shunt trip disconnect
•
Fire safety interface relay
•
Internally powered, relay activated shunt trip system
•
Mechanically interlocked auxiliary contact
Accessories
•
Self-contained adherence to elevator consensus standards, NFPA
70, NFPA 72, ANSI/ASME A17.1
•
•
Shunt trip capability
•
Fire safety signal interface
•
Shunt trip voltage monitoring
•
Component protection with Low-Peak™ Class J fuses
•
Lockable in the open position with three-lock capability
•
Optional key-test switch and optional pilot light for easy inspection
•
No annual calibration or testing of overcurrent protection required
•
Padlockable for service-work safety and open-door “override” for
troubleshooting
For added safety, use the Bussmann series SAMI™ fuse covers
to improve maintenance personnel protection (OSHA 1910.333,
Paragraph C)
Ordering
•
The Quik-Spec Power Module Switch and Panel are factory
configured. To place your order, have all relevant electrical
and circuit information contact your Bussmann series product
representative.
Data sheet no. 1145 (switch) 1146 (panel)
12-4
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Quik-Spec™ electrical gear — 12
Hydraulic elevators
Power Module Switch catalog number system
Hydraulic elevators need battery backup to help prevent stranding
passengers. To keep the elevator from moving when it’s been
manually shut down for maintenance, the NEC requires battery
backup be connected to the elevator disconnecting means through
an auxiliary contact.
To order, use this build-a-code to specify your Power Module switch.
However, an unintended consequence can be passengers getting
stranded because of devices that open automatically (circuit breakers
and disconnects utilizing a molded case switch with a trailing fuse
block) will operate with a fault on their loadside. That operation also
disables the battery backup and strands passengers. That’s why the
Power Module has a non-automatic fusible shunt trip switch. If the
Power Module has a fault on its loadside, the fuses open and the
battery stays enabled. Thus the Power Module ensures that battery
power is enabled when the passengers need it to exit - and disabled
to allow safe maintenance of the elevator and hoistway.
Amp rating†
Power
failure
Fire in
shaft or
machine
room
Disconnect
manually
opened
Fault on
loadside of
disconnect
Reason
Offered
by
Power
Module
Yes
Need to lower elevator
and allow passengers
to exit.
Yes
Yes
No
Recall is initiated by
smoke detector and
lowers elevator to a
safe floor. Battery not
needed.
Yes
Yes
No
Worker to perform
maintenance. Elevator
must remain stationary
to prevent injury.
Yes
Yes
Need to lower elevator
and allow passengers
to exit.
Yes
PS = Power
Module Switch
•
Control transformer*†
•
•
Yes
No
Ship-direct service within three business days for Power Module
switches (PS_) and 10 business days for Power Module panels
(PMP_).
Power Module switch*
Amps
Volts
60
480
PS1T48R1KGBF3-X
100
480
PS1T20R1KGBF3-X
100
208
PS2T48R1KGBF3-X
200
480
200
208
PS2T20R1KGBF3-X
R1 = 120 Vac coil,
R2 = 24 Vdc coil
Optional key test switch
•
K = Key
Optional pilot light ON
•
G = Green, R = Red
W = White
Optional neutral lug††
•
N6 = 30-60 A, N1 = 100 A
N2 = 200 A, N4 = 400 A
Auxiliary contacts†
QuikShip service program, 3 days for switches and 10
days for panels!
Catalog no.
T20 = 208 V, T24 = 240 V
T48 = 480 V, T60 = 600 V
Fire safety interface relay
(3PDT, 10A, 12V)†
•
B = 2 NO/NC
Fire alarm voltage monitoring
relay (to monitor shunt trip
voltage)
•
PS6T48R1KGBF3-X
3 = 30, 6 = 60, 1 = 100
2 = 200, 4 = 400
Quik-Spec
Electrical gear
Scenario
Battery
lowering
required
Offered
by other
elevator
disconnects
PS 1 T48 R1 K G N1 B F1 U
F1 = Single-pole,
F3 = Three-pole**
Optional NEMA enclosures
(Type 1 standard with no
suffix designation required)
•
U = Type 3R, Y = Type 4,
Z = Type 12
* 100 Va with primary and secondary fusing (120 V secondary).
** Only for use with R1 option.
† Required equipment.
†† Neutral lug rating should be equal to or greater than the switch amp rating.
Power Module panel**
Catalog no.
Amps
PMP-400-X
400
PMP-600-X
600
PMP-800-X
800
* Three day PS_ shipment requires ordering from catalog numbers shown,
limit three units or less per order.
** 10 day PMP_ shipment covers NEMA 1 enclosures with the amp ratings
shown and all requirements for relay type (AC or DC), accessory options and
number of switches. To order PMP_, contact your Bussmann series product
representative with all relevant electrical and circuit information.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Data sheet no. 1145 (switch) 1146 (panel)
Eaton.com/bussmannseries
12-5
12 — Quik-Spec™ electrical gear
Fused and non-fused AC disconnects
Enclosure
Fused and non-fused pullout
AC disconnects in NEMA 3R
enclosures. Fused versions
are available in 30 and 60 amp
ratings with or without selftesting GFCI receptacles. Nonfused versions are available in
60 amp versions with or without
self-testing GFCI receptacles.
•
Ratings
Dimensions
•
•
120 Vac single-phase
Fused disconnect
•
240 Vac split-phase
•
AC disconnects meet NEC Code requirements under article 440.14
•
Self-testing GFCI units meet NEC Code requirements under
articles 210.63, 210.8, and 406.8(B)(1)
•
NEMA 3R enclosures withstand outdoor environment
•
Padlockable with two-position pullout handle to lock safety shield
when in the ON position. (Not available on GFCI or 60 A switched
units.) For added safety, pullout handle can be stored in the
compartment in the OFF position
Amps 30 or 60 A
•
Typical applications
Agency Information
UL Listed to UL 1429, cUL
Certified, UL Guide WGEW
•
See catalog numbers table
Features
Volts
•
Metallic NEMA 3R housing with weather resistant coating
Non-fused disconnect
Conductors
•
Residential, light industrial/commercial AC and heat pump service
•
Spas/whirlpools, swimming pools, pump houses
•
Suitable for use as service entrance equipment with field-installed
ground bar. Order catalog number DPFG
3-14 AWG Cu/Al
•
Non-fused disconnect
with GFCI receptacle
Catalog no.
Fused disconnects
B221-30F
B221-30FGFST
Amp
rating
Description
Pullout disconnect
Pullout disconnect with
Pullout disconnect with
B221-30FGFWTST
resistant rated GFCI
B222-60F
Pullout disconnect
B222-60FGFST
Pullout disconnect with
Pullout disconnect with
B222-60FGFWTST
resistant rated GFCI
Non-fused disconnects
B222-60NF
Pullout disconnect
B222-60NFGFST
Pullout disconnect with
Pullout
disconnect with
B222-60NFGFWTST resistant
rated GFCI
B222-60NFNA
Disconnect switch
GFCI
weather-resistant/tamper-
GFCI
weather-resistant/tamper-
GFCI
weather-resistant/tamper-
30
Max Hp rating
120 V 240 V
1.5
60
3
3
60
3
10
10
Fuse
class
H or R
H or R
*
—
Approximate dimensions (in)
Height
Width
Depth
8-3/4
5-3/8
2-7/8
13
7-1/2
4-3/4
8-3/4
5-3/8
2-7/8
13
7-1/2
4-3/4
8-3/4
5-3/8
2-7/8
11-3/4
6-1/2
4-1/2
8-3/4
5-3/8
3-5/8
* Upstream overcurrent protective device (OPCD) not to exceed 60 A.
For a 30 and 60 amp pullout replacement handle, order catalog number 96-3258-4.
Recommended Bussmann series fuses
Fuse class
H
R
Catalog symbol
NON-(amp)
FRN-R-(amp)
LPN-RK-(amp)SP (non-indicating)
LPN-RK-(amp)SPI (indicating
Operation
One time, general purpose
Available amps
Up to 60
Dual element, time-delay
Up to 60
35 to 60
Data sheet no.
1030
1019
1003
1003
Data sheet no. 1143
12-6
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Surge protective devices — 13
Contents
Section
page
Description
Selecting Type 1 SPDs
2-3
Type 1 SPDs
SurgePOD PRO Type 1, NEMA 4X
4-5
BSPA, Type 1 and 2, NEMA 4X
6-9
BSPD high capacity Type 1 and 2, NEMA 1 and 4X
10-14
UL DIN-Rail high SCCR Type 1 SPDs
1-pole, BSPM_S2G
15-16
2-pole, BSPM_S3G
17-18
3-pole, BSPM_WYG/DLG
19-20
4-pole, BSPM_WYNG/HLG
21-22
UL DIN-Rail power and control voltage Type 4 SPDs
1-pole, Type 4 power BSPM_LV
23-24
2-pole, Type 4 voltage BSPH2A_LV
25-26
RJ45/Ethernet
27
Universal 4 wire
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
28-29
Eaton.com/bussmannseries
13-1
Surge protective
devices
UL 497B DIN-Rail data signal SPDs
13 — Surge protective devices
Selecting a Type 1 SPD
Electrical systems and connections
Step 1: Review the following system diagrams that show the SPD
connection points for the Bussmann series SPD models that may be
applied.
Step 2: Locate the system diagram that matches your application,
note the applicable SPD model numbers and then proceed to the
product pages for their details.
Understanding the following will help assure that the correct surge
protective device is specified:
•
Typical North American electrical systems include single-phase,
split-phase, Delta and Wye.
•
Selecting the wrong SPD generally arises from misunderstanding
the nominal system voltage, ground and neutral connections.
•
General convention has it that a “ground” wire is not counted as a
wire in the system description (e.g., 3 wire, 4 wire, etc.), but it is
counted as a connection point if the SPD has a ground wire.
•
Selecting a voltage rating for Wye systems must be based upon its
nominal system voltage rating and not on the leg-to-leg voltages.
•
Bonded N-G configurations do not require protection at the service
entrance transformer, but protection is suggested in downstream
bonded N-G systems if the length of conductor making the bond is
greater than 10 feet (3m).
BSPD high capacity
SurgePOD PRO
Two wire single-phase 2 connection points
Three wire split-phase/twopole - 3 connection points
Three wire split-phase/twopole - 3 connection points
Application: Sub-panel or feeder
panel
Application: Service entrance
panel
Application: Sub-panel or feeder
panel
Volts: 120, 240 (L-N)
Volts: 120, 240 (L-N)
Note: Must be installed within
10 feet (3m) of a bonded neutral
ground connection per IEEE
C62.41-1991.
Note: Installation for where the
SPD is greater than 10 feet (3m)
from a bonded neutral-ground
connection.
Volts: 120, 240 (L-N), 240, 480
(L1-L2)
Note: Installation at or less
than 10 feet (3m) from the
transformer and within 10 feet
(3m) of a bonded-neutral ground
connection.
G
Dedicated one-pole
circuit breaker,
or one-pole
fusible switch
BSPA
L1
N
L2
Dedicated one-pole
circuit breaker,
or one-pole
fusible switch
Three wire split-phase/twopole plus ground 4 connection points
Application: Service entrance
equipment
Volts: 120, 240 (L-N), 240 (L1-L2)
Note: Installation where greater
than 10 feet (3m) of a bondedneutral ground connection.
Dedicated two-pole
common trip
circuit breaker, or
two-pole
fusible switch
Dedicated two-pole
common trip
circuit breaker, or
two-pole
fusible switch
Black
Black
Black
Black
Black
Black
White
White
White
White
L1
L1
L1
Green
L1
G
G
G
N
L2
N
N
G
SPD catalog numbers:
•
BSPA
•
•
Specify from build-a-code
catalog number system
SurgePOD™ PRO
•
BSPA
•
•
Specify from build-a-code
catalog number system
BSPA
•
N
SPD catalog numbers:
SPD catalog numbers:
•
SPP40SP1120SN
13-2
SPD catalog numbers:
•
L2
Green
•
Specify from build-a-code
catalog number system
BSPA
•
Specify from build-a-code
catalog number system
SurgePOD PRO
•
SPP40SP2240PN
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Surge protective devices — 13
Three wire split-phase/twopole plus ground 4 connection points
Application: Sub-panel or feeder
panel
Volts: 120, 240 (L-N), 240 (L1-L2)
Note: For installation greater
than 10 feet (3m) of a bondedneutral ground connection.
Three wire Wye plus ground
- 4 connection points
Four wire Wye plus ground 5 connection points
Four wire Wye plus ground 5 connection points
Application: Sub-panel or feeder
panel
Application: Service entrance
equipment
Application: Sub-panel or feeder
panel
Volts: 208, 480, 600 (L-L)
Volts: 120, 127, 277, 347 (L-N),
208, 220, 480, 600 (L-L)
Volts: 120, 127, 277, 347 (L-N),
208, 220, 480, 600 (L-L)
Note: Common system
configuration with Neutral pulled
into facility and bonded to
ground.
Note: Common system
configuration with Neutral pulled
into facility and bonded to
ground.
Note: A common MCC
configuration for pumping and
water/waste water treatment.
L1 N L2
N
L2
Dedicated two-pole
common trip
circuit breaker, or
two-pole
fusible switch
Dedicated three-pole
common trip circuit
breaker, or three-pole
fusible switch
Black
Black
White
L2
Black
Dedicated three-pole
common trip circuit
breaker, or three-pole
fusible switch
Black
Black
Black
White
Black
L1
Black
Green
L1
L2
L3
Green
N
L2
G
SPD catalog numbers:
BSPA
•
L3
Green
G
N
G
L1
•
L2
Black
White
G
Dedicated three-pole
common trip circuit
breaker, or three-pole
fusible switch
Black
Black
L1
L3
Green
SPD catalog numbers:
N
SPD catalog numbers:
•
Specify from build-a-code
catalog number system
BSPA
•
•
Specify from build-a-code
catalog number system
•
•
SurgePOD PRO
•
SPP40SP3208WYG
•
SPP4SP3480WYG
BSPA
•
•
•
Specify from build-a-code
catalog number system
BSPA
•
SPD catalog numbers:
Specify from build-a-code
catalog number system
BSPD
•
Specify from build-a-code
catalog number system
BSPD
•
Three wire Delta plus
ground - 4 connection points
L3
Specify from build-a-code
catalog number system
Application: Service entrance
equipment, sub-panel or feeder
panel
Volts: 240, 480, 600 (L-L)
Dedicated three-pole
common trip circuit
breaker, or three-pole
fusible switch
Black
Black
Black
L1
L2
L3
Green
G
SPD catalog numbers:
•
BSPA
•
•
Specify from build-a-code
catalog number system
BSPD
•
Specify from build-a-code
catalog number system
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
13-3
Surge protective
devices
L1
13 — Surge protective devices
SurgePOD™ PRO for UL 1449 4th Edition Listed
loadside and lineside protection
The Bussmann series SurgePOD
PRO is a Type 1 UL Listed 1449
4th Edition surge protective device
suitable for installation on both the
loadside or lineside of the service
entrance overcurrent protective
device and is well suited for
light commercial and residential
applications.
Available in popular voltage and
system specific versions to match
common residential and light
commercial electrical system and
equipment requirements. The
SurgePOD PRO delivers superior
surge protection using MOV
thermal disconnect technology that
eliminates the need for additional
overcurrent protection.
Catalog no.
SPP40SP1120SN
SPP40SP2240PN
SPP40SP3600WYG
SPP40SP3208WYG
SPP40SP3480WYG
See catalog number explanation below for details.
Catalog number explanation
This is not a build-a-code for configuring an orderable catalog
number. It's purpose is to show what portions of the catalog number
denotes which specification.
SPP 40S Px xxx xxx
SPP = Product family
Surge rating
•
2011/65/EU
easyID™
LED Status
Indicator
•
P1 = 1, P2 = 2, P3 = 3
System voltage (Vac)
•
Type 1 UL 1449 4th Edition Listed SPDs are easily selected and
installed on the loadside or lineside of the service entrance
overcurrent protective device
•
Voltage specific models precisely match and protect electrical
systems and equipment better than “one-size-fits-all” SPDs
•
Thermal disconnect technology eliminates the need for additional
fusing
•
NEMA 4X enclosure for indoor or outdoor applications
•
easyID™ LED status indicator provides surge protection status at a
glance
•
120, 208, 240, 480, 600
System type/wires and connection points
•
SN = Single-phase 2 wire, 2 connection points
•
PN = Split-phase 3 wire , 3 connection points
•
DLG = Three-phase Delta 3 wire + G, 4 connection points
•
WYG = Three-phase Wye 3 wire + G, 4 connection points
easyID™ LED status indicator
Dimensions — in
Ø 1-1/16”
40 kA surge current capacity
Number of wires
Parallel connection to the electrical system permits the SurgePOD
PRO SPD to be installed on any ampacity panel.
The easyID LED status indicator will illuminate when the unit is
properly installed and the system or equipment being protected is
energized. The following LED color/status indicates:
GREEN LED = Good
4-1/8”
The circuit is energized and protected.
1-11/16”
3-3/16”
4-1/16”
3-3/8”
1-11/16”
2-1/16”
SPP40SP3240DLG
SPP40SP3480DLG
2-1/16”
7/8”
Mounting
RED LED = Replace
The circuit is energized and unprotected.
SurgePOD PRO is a panel mount device. It may also be mounted
using a customer supplied bracket or directly onto a female threaded
conduit fitting.
For NEMA 4X installation, install appropriate customer
supplied gasket between SPD and enclosure wall.
The unit needs replacing.
LED is Out / Unlit:
The circuit is most likely deenergized
The unit’s leads are disconnected
Tighten locknut to
20.3 Lb-In (2.3N•m)
The unit is damaged
Authorized personnel should follow all
prescribed lockout/tagout and safety
procedures in troubleshooting the cause for
the above conditions. Opening SurgePOD
PRO enclosure will void the warranty.
Data sheet no. 10033
13-4
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Surge protective devices — 13
SurgePOD PRO
Catalog no.
SPP40SP1120SN
Nominal system voltage
120
SPP40SP2240PN
Max. continuous operating AC
voltage (MCOV) (VC)
150
System type
Single-phase 2 wire
Connection points
2
120/240
150
Split-phase 3 wire
3
SPP40SP3240DLG
240
320
Three-phase Delta 3 wire + G
4
SPP40SP3480DLG
480
550
Three-phase Delta 3 wire + G
4
SPP40SP3208WYG
208
150
Three-phase Wye 3 wire + G
4
SPP40SP3480WYG
480
320
Three-phase Wye 3 wire + G
4
SPP40SP3600WYG*
600
420
Three-phase Wye 3 wire + G
4
* Not CSA Certified.
Values
200 kA
10 kA
40 kA
600 A
2
Motor
starter
overload
relay
M
5
Feeder
with no
motor
load
3
6a
6b
Feeder
with all
motor
load
4
Feeder
with
combo
motor/
no motor
load
4. Feeder circuit with mixed loads∆. (430.63) Size fuse at sum of:
a. 150% to 175%†† of the largest motor’s full-load current**,
plus
b. 100% of all other motors’ full-load current**, plus
c. 125% of the continuous, non-motor load†, plus
d. 100% of the non-continuous, non-motor load
5. Branch circuit with no motor load. (210.20) The fuse size
must be at least 125% of the continuous load† plus 100% of
the non-continuous load. Do not size larger than the conductor’s
ampacity*.
6. Motor branch circuit with overload relays. Where overload
relays are sized per 430.32 for motor running overload
protection, there are various alternatives:
6a. Motor branch circuit short-circuit and ground fault
protection. (430.52) (most common). Size the fuse
between 150 to 175%†† of the full load current.** Provides
branch circuit short-circuit and ground fault protection only.
11
6b. Motor branch circuit short-circuit and ground fault
protection (430.52) as well as backup overload
protection. Size FRN-R and FRS-R Class RK5 dual-element,
time-delay fuses at 125% and LPN-RK-SP and LPS-RK-SP
Class RK1 dual-element, time-delay fuses at 130% of motor
full-load current or next higher size. This results in closer
fuse sizing and provides some backup running overload
protection. In addition, it provides motor branch circuit shortcircuit and ground fault protection. Sizing in this manner may
result in better motor protection if the overload relays are not
properly sized or calibrated.
12
7
Large
motor
5
5
M
NonCont.
cont.
loads,
lighting/ loads
heating
M
7
7
7
M
7.
M
M
9
5
• Motor 1.15 service factor or 40°C rise. Size the fuse at 110%
to 125% of the motor full-load current on the name plate
[430.6(a)(2)].
5
• Motor less than 1.15 service factor or over 40°C rise. Size
fuse at 100% to 115% of motor full-load current on the name
plate [430.6(a)(2)].
M
Continuous
loads
Power factor
correction
capacitor
8.
Large motor branch circuit. Fuse larger than 600 A. [436.52(c)
and 430.52(c)(1) Exceptions 2(d)]. For large motors, size LowPeak KRP-C-SP time-delay fuse at 175% to 300% of the motor
full-load current**, depending on the starting method; i.e., partwinding starting, reduced voltage starting, etc.
9.
Power factor correction capacitors. [460.8(b)]. Size dualelement fuses as low as practical, typically 150% to 175% of
capacitor rated current.
Dual-element, time-delay fuses
Class CF (up to 400 A), and J, RK1 and RK5 ( up to 600 A)
For fuses above 600 A, use Class L time-delay fuses with
ratings from 601-6000 A. While these fuses are not dual-element
construction, the Bussmann series KRP-C-SP is a time-delay fuse.
1. Main service. Size fuse according to method in 4 below.
2. Feeder circuit with no motor loads. (215.3) The fuse size
must be at least 125% of the continuous load† plus 100% of
the non-continuous load. Do not size larger than the conductor’s
ampacity*.
3. Feeder circuit with all motor loads. (430.62) Size the fuse at
150% to 175% of the largest motor’s full load current** plus the
full-load current** of all other motor's∆.
Motor branch circuit with only fuse protection. Where
the fuse is the only motor protection, the following FRS-R
and FRN-R, Class RK5, fuses provide motor running overload
protection (430.32) and short-circuit protection (430.52):
10. Transformer primary fuse (without secondary fuse
protection). [450.3(b)] When transformer primary current is
equal to or greater than 9 amps, the dual-element, time-delay
fuse should be sized at 125% of transformer primary current or
the next size larger if 125% does not correspond to a standard
fuse size. Note: Secondary conductors must be protected from
overcurrent damage per Article 240.
11. Transformer primary fuse (with secondary fuse protection).
[450.3(b)] May be sized at 250% of transformer primary current
if the secondary is fused per 12 below.
12. The secondary fuse is sized at no more than 125% of
secondary full-load current. [450.3(b)] Note: Secondary
conductors must be protected at their ampacities per Article
240.
16-2
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse and fuse block cross reference, and index — 16
(FCF, JKS, KTN-R, KTS-R, JJN, JJS, LP-CC, KTK-R and FNQ-R)
1. Main service. Size fuse according to method in 4.
2. Feeder circuit with no motor loads. (215.3) The fuse size
must be at least 125% of the continuous load† plus 100% of
the non-continuous load. Do not size larger than the conductor’s
ampacity.*
3. Feeder circuit with all motor loads. (430.62) Size the fuse at
300% of the largest motor’s full-load current** plus the full-load
current** of all other motors.
4. Feeder circuit with mixed loads. (430.62) Size fuse at sum of:
a. 300% of the full-load current** of the largest motor, plus
3. Feeder circuit with all motor loads. (430.24) Conductor
ampacity at least 125% of the largest motor full-load amps plus
100% of all other motors’ full-load amps.
4. Feeder circuit with mixed loads. (430.24) Size according to
method 1 above.
5. Branch circuit with no motor load. [210.19(a)(10] Conductor
ampacity at least 125% of the continuous load plus 100% of the
non-continuous load.
6, 7 and 8. Motor branch circuits. (430.22) Conductor ampacity at
least 125% of the motor full-load current.
9. Capacitor connected to motor branch circuit. (460.8)
Conductor ampacity at least 135% of capacitor rated current, and
at least 1/3 the motor circuit conductors’ ampacity.
b. 100% of the full-load current** of all other motors, plus
10, 11. Conductor ampacity minimum 125% of transformer fullload current.
c. 125% of the continuous, non-motor load†, plus
12. Conductor ampacity per 1 above.
d. 100% of the non-continuous, non-motor load
†
5. Branch circuit with no motor loads. (210.20) The fuse size
must be at least 125% of the continuous load† plus 100% of
the non-continuous load. Do not size larger than the conductor’s
ampacity.*
6a. Motor branch circuit with overload relays. (430.52) Size
the fuse at 300% of the full load current**. Provides branch
circuit short-circuit and ground fault protection only. Other
means must be utilized to provide motor overload protection
(see 430.32). (If 300% is not a standard fuse amp rating,
430.52(C)(1) Exception 1 permits the next standard fuse amp
rating. If the motor cannot start with this size fuse, 430.52(C)
(1) Exception 2 permits increasing the fuse size up to 400%
provided the fuse rating does not exceed 600 A.)
6b. Motor branch circuit short-circuit and ground fault
protection (430.52) as well as backup overload protection.
Not applicable for non-time-delay fuses; use FRN-R and
FRS-R, Class RK5, dual-element time-delay fuses or LPN-RKSP and LPS-RK-SP Class RK1, dual-element, time-delay fuses
(see 6b under dual-element time-delay fuse selection). Nontime-delay fuses cannot be sized close enough to provide
motor running backup overload protection. If sized for motor
overload backup protection, non-time-delay fuses would open
due to motor starting current.
7. Motor branch circuit with only fuse protection. Not applicable
for non-time-delay fuses; use FRN-R and FRS-R, Class RK5, dualelement time-delay fuses (see 7 under dual-element time-delay
fuse selection). Non-time-delay fuses cannot be sized close
enough to provide motor running overload protection. If sized for
motor overload protection, non-time-delay fuses would open due
to motor starting current.
8. Power factor correction capacitors. [460.8(B)] Size non-timedelay fuses as low as practical, typically 250% to 300% of
capacitor rated current.
Conductor ampacity selection
1. Feeder circuit and main circuit with mixed loads. (430.24)
conductor ampacity at least sum of:
100% of the continuous load can be used rather than 125% when the switch
and fuse are listed for 100% continuous operation as an assembly (e.g., 215.3
Exc 1). Some bolted pressure switches and high pressure contact switches
400 A to 6000 A with Class J and L fuses in specified assemblies are listed
for 100% continuous operation.
*
Where conductor ampacity does not correspond to a standard fuse amp
rating, the next higher amp rating fuse is permitted when 800 A or less
[(240.4(B)]. Above 800 A the conductor ampacity must be equal or greater
than the fuse amp rating [(240.4(C)]. However, per 240.91(B), when above 800
A for supervised industrial installations, the conductor ampacity is permitted
to be 95% of the fuse amp rating as long as the equipment is listed for that
size conductor and the conductor is protected within its time vs. current limits
[240.4 Informational Note].
∆
In many motor feeder applications dual-element fuses can be sized at
ampacity of feeder conductors.
•
Available short-circuit current and the clearing time of the overcurrent device
must be considered so that the conductor’s ICEA (P32.382) withstand rating
is not exceeded.
** On general motor applications, motor full load amps for calculating conductor
ampacity and for calculating fuse amp ratings for motor branch circuit shortcircuit and ground fault protection (430.52) are selected from NEC Tables
430.247 through 430.250 per 430.6(A)(1). However, the motor nameplate
current rating is used for sizing motor overload protection (430.32) per
430.6(A)(2).
†† 430.52(C)(1) allows a maximum of 175% for time-delay fuses, for all but
wound rotor and DC motors. A range of 150% to 175% was used for these
guidelines, even though 430.52(C)(1) allows a maximum of 175% for timedelay fuses as stated above. The reason for showing this range is to highlight
the possibility for application selection. In some situations, there may be a
difference in the switch amp rating or fuse block amp rating in selecting 150%
versus 175%. Using 175% is permitted and is suggested for heavy starting
current or longer starting time applications.
Further note: the NEC permits larger sizing via two exceptions. 430.52(C)
(1) Exception 1 permits the next standard size if 175% does not correspond
with a standard fuse amp rating. If the motor cannot start with this size fuse,
430.52(C)(1) Exception 2 permits increasing a time-delay fuse size up to
225%.
(Note that while a time-delay fuse may not exceed 225% when using
Exception 2, using a time-delay fuse could exceed 225% when applying
Exception 1. For example, assume a motor with a FLA of 1.0 amp. 430.52(C)
(1) would allow a 1.75 amp fuse. Exception 1 would allow a 3 amp timedelay fuse per 240.6(A). Exception 2 limits the time-delay fuse to 2.25 amps
as a maximum, but Exception 2 is not utilized or needed if Exception 1 is
adequate.)
*** The conductor ampacity may have to be greater due to using adjustment or
correction factors per 210.(19)(A)(1) and 215.2(A)(1).
a. 100%†† of the full-load current** of the largest motor, plus
a. 100% of the full-load current** of all other motors, plus
c. 125% of the continuous, non-motor load†, plus
d. 100% of the non-continuous, non-motor load
2. Feeder circuit with no motor load. [215.2(a)(1)] Conductor
ampacity at least 125% of the continuous load plus 100% of the
non-continuous load.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
16-3
Cross reference
and index
Non-time delay and all Class CC fuses
16 — Fuse and fuse block cross reference, and index
Selective coordination
While important, selecting overcurrent protective devices (OCPDs)
based solely on their ability to carry system load current and
interrupting the maximum fault current at their respective application
points is not enough. As the demand for power system reliability
increases, the OCPD’s performance in the system becomes more
and more critical as its function should, ideally, limit a power system
outage to only that portion of the circuit which is faulted. The
selected OCPD types and ratings (or settings) determine whether
they are selectively coordinated upstream and downstream in a
system so that only the nearest upstream OCPD will open for
the full range of overcurrents and opening times, and leave the
remainder of the system undisturbed to preserve service continuity.
X
LPS-RK-200SP
LPS-RK-400SP
KRP-C-800SP
2:1 (or more)
2:1 (or more)
It’s a simple matter to selectively coordinate a system using
published fuse amp rating ratio tables and maintaining the minimum
ratios between an upstream and downstream fuse. This will
ensure selective coordination is achieved for all fault currents up
to the fuse’s interrupting rating. These selectivity ratios are for all
overcurrent levels up to the fuse interrupting or 200 kA, whichever is
lower.
For an in-depth examination of this subject, see selective
coordination in Section 4 of the Selecting Protective Devices
handbook, publication number 3002.
Coordination, Selective (selective coordination)
Localization of an overcurrent condition to restrict outages to
the circuit or equipment affected, accomplished by the selection
and installation of overcurrent protective devices and their
ratings or settings for the full range of available overcurrents,
from overload to the maximum available fault current, and for
the full range of overcurrent protective device opening times
associated with those overcurrents.
Selective coordination is mandatory per the NEC for the circuit
paths of some vital loads on specific systems including:
Figure 1 Low-Peak fuses applied with a simple 2:1 amp rating ratio
achieves selective coordination.
Figure 1 shows the minimum amp rating ratios for Bussmann
series Low-Peak fuses required to provide “selective coordination”
(discrimination) between upstream and downstream fuses.
•
•
•
•
•
•
Elevator circuits — 620.62
Critical operations data systems — 645.27
Campus style fire pumps — 695.3
Emergency systems — 700.32
Legally required standby systems — 701.27
Critical operations power systems — 708.54
Bussmann series fuse selectivity ratios
This selectivity ratio table identifies the fuse amp rating ratios that ensure selective coordination.
Circuit
Downstream / loadside fuse
Amp rating
range
6016000 A
0-600 A
01200 A
0-600 A
060 A
Dual-element, time-delay
Fastacting
Fastacting
Fastacting
Fastacting
Timedelay
Fusetron
(RK5)
Limitron
(L)
Limitron
(RK1)
Limitron
(T)
Limitron
(J)
SC
(G)
(CC)
LPN-RK-SP
LPS-RK-SP
FRN-R
FRS-R
KTU
KTN-R
KTS-R
JJN
JJS
JKS
SC
LP-CC
FNQ-R
KTK-R
2:1
2:1
4:1
2:1
2:1
2:1
2:1
2:1
2:1
6014000 A
Timedelay
Timedelay
Time-delay
Low-Peak
(L)
Limitron
(L)
CUBEFuse
(CF2)
Low-Peak
(J)
Low-Peak
(RK1)
Bussmann
fuse
symbol
KRP-C_SP
KLU
TCF
LPJ-SP
KRP-C-SP
2:1
2.5:1
2:1
Fuse
type
Trade name
(fuse class)
Upstream / lineside fuse
0-600 A
6016000 A
1-100 A
0-30 A
601 to
6000 A
Timedelay
Low-Peak
(L)
601 to
4000 A
Timedelay
Limitron
(L)
KLU
2:1
2:1
2:1
2:1
2:1
4:1
2:1
2:1
2:1
2:1
2:1
2:1
0 to 600 A
Dualelement
Low-Peak
(RK1)
LPN-RK-SP
LPS-RK-SP
—
—
2:1
2:1
2:1
8:1
—
3:1
3:1
3:1
4:1
2:1
0 to 600 A
Dualelement
Low-Peak
(J)
LPJ-SP
—
—
2:1
2:1
2:1
8:1
—
3:1
3:1
3:1
4:1
2:1
0 to 100 A
Dualelement
CUBEFuse
(CF2)
TCF
—
—
2:1
2:1
2:1
8:1
—
3:1
3:1
3:1
4:1
2:1
0 to 600 A
Dualelement
Fusetron
(RK5)
FRN-R
FRS-R
—
—
1.5:1
1.5:1
1.5:1
2:1
—
1.5:1
1.5:1
1.5:1
1.5:1
2:1
601 to
6000 A
Fastacting
Limitron
(L)
KTU
2:1
2.5:1
3:1
3:1
3:1
6:1
2:1
2:1
2:1
2:1
2:1
2:1
0 to 600 A
Fastacting
Limitron
(RK1)
KTN-R
KTS-R
—
—
3:1
3:1
3:1
8:1
—
3:1
3:1
3:1
4:1
—
0 to 1200 A
Fastacting
Limitron
(T)
JJN
JJS
—
—
3:1
3:1
3:1
8:1
—
3:1
3:1
3:1
4:1
—
0 to 600 A
Fastacting
Limitron
(J)
JKS
—
—
3:1
3:1
3:1
8:1
—
3:1
3:1
3:1
4:1
—
0 to 60 A
Timedelay
SC
(G)
SC
—
—
3:1
3:1
3:1
4:1
—
2:1
2:1
2:1
2:1
—
General notes: Ratios given in this table apply to only Bussmann fuses. When fuses are within the same case size, consult Bussmann.
1. Where applicable, ratios are valid for indicating and non-indicating versions of the same fuse. At some values of fault current, specified ratios may be lowered to permit
closer fuse sizing. Consult Bussmann.
2. Time-delay Class CF TCF CUBEFuse OCPDs are 1 to 100 A Class J performance; dimensions and construction are a unique, finger-safe design.
16-4
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse and fuse block cross reference, and index — 16
Low voltage, branch circuit fuse types and classes
The NEC defines the branch circuit OCPD as capable of providing
protection for service, feeder and branch circuits, and equipment
over the full range of overcurrents between its rated current and its
interrupting rating. They’re also the only OCPDs the NEC permits to
be installed in a building’s electrical system. The definition found in
Article 100 is as follows:
“Overcurrent Protective Device, Branch Circuit. A device capable
of providing protection for service, feeder, and branch-circuits and
equipment over the full-range of overcurrents between its rated
current and its interrupting rating. Such devices are provided with
interrupting ratings appropriate for the intended use but no less than
5,000 amperes.”
Per this definition, branch circuit OCPDs are suitable to protect
branch or feeder circuits and service conductors at any point in the
electrical system, and must be capable of protecting against the full
range of overcurrents, including overloads and faults. In addition, the
OCPD must have an interrupting rating sufficient for the application
per NEC 110.9. Branch circuit OCPDs meet common, minimum
standard requirements for spacing and operating time-current
characteristics defined by UL.
For example, by using Class J fuses and equipment,
only Class J fuses can be installed. This ensures
the voltage rating is always 600 V (whether the
system is 120, 208, 480, or 575 V), the interrupting
rating is at least 200 kA, and the fault current
protection provided by its current-limiting, let-through
characteristics. If the fuse needs replacing, only a
Class J fuse can be installed.
Class R fuse rejection clips
(restriction on the ferrule or
notch on the blade) that will
only accept Class R fuses.
Class R rejection ferrule
Class R
rejection blade
Common current-limiting Bussmann series fuses
Device type
UL 248 branch
circuit fuses
Acceptable devices
Class CC
Class CF
Class G
Class H(K)
Class J
Class L
Class RK1
Class RK5
Class T
Plug fuses
Bussmann series fuses
LP-CC, FNQ-R, KTK-R
TCF, FCF
SC
NON, NOS
LPJ-, JKS, DFJ
KRP-C, KLU, KTU
LPN-RK, LPS-RK, KTN-R,
KTS-R
FRN-R, FRS-R
JJN, JJS
W, T, TL, S, SL
The UL 248 fuse standards cover distinct low-voltage (600 volts or
less) fuse classes. Of these, modern current-limiting fuse Classes
CC, CF, G, J, L, R and T are the most important. The branch circuit
current-limiting fuses’ rejection feature helps ensure electrical
system safety over its life because it prevents installing other
fuse types or larger case sizes. Thus, fuses that cannot provide
a comparable minimum protection level for critical ratings and
performance cannot be inadvertently installed.
FRN-R — Class RK5, 250 V, 200 kA IR
up to 600 A
LPN-RK — Class RK1, 250 V, 300 kA IR
up to 600 A
FRS-R — Class RK5, 600 V, 200 kA IR
up to 600 A
LPS-RK — Class RK1, 600 V, 300 kA IR
up to 600 A
This is inherent in all current-limiting fuse classes. Each fuse class
must meet:
•
Maximum let-through limits (Ip and I2t) during fault conditions
•
Minimum voltage ratings
•
Minimum 200 kA interrupting ratings for Class CC, CF, J, L, R and T
•
Physical rejection of
•
Different fuse classes and case sizes*
•
Non current-limiting fuses
LPJ — Class J, 600 V, 300 kA IR
up to 600 A
LP-CC, FRQ-R, KTK-R — Class CC,
600 V, 200 kA IR up to 30 A
JJN — Class T, 300 V, 200 kA IR
up to 1200 A
JJS — Class T, 600 V, 200 kA IR
up to 800 A
* Branch circuit fuse blocks and holders are made to hold a fuse class case size
that corresponds to a particular amp range. This prevents fuses from the same
class with a larger case size from being installed and helps prevent overfusing.
There are instances where it is desirable to install a class fuse with a smaller
case size than the block or holder. For these situations, it is permitted to use
fuse reducers.
These product standards ensure branch circuit fuses provide
specific, minimum circuit protection when current-limiting fuses and
equipment are used. A given fuse class will ensure the voltage and
interrupting rating, and degree of current limitation for the electrical
system’s life.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
16-5
Cross reference
and index
The table below contains the acceptable fuses that can be used for
branch circuit protection.
16 — Fuse and fuse block cross reference, and index
Glossary of common electrical terms
Class T fuse — An industry class of 300 V and 600 V fuses in ratings
electrons in an electrical circuit. An amp is the amount of current that will
flow through a resistance of one ohm under a pressure of one volt.
from 1 through 1200 amps (300 V) and 1 through 800 amps (600 V).
They are physically very small and can be applied where space is at a
premium. They are fast-acting fuses, with an interrupting rating of 200 kA
RMS.
Amp rating — The current-carrying capacity of a fuse. When a fuse is
Classes of fuses — The industry has developed basic physical
Ampere (amp) — The measurement of intensity of rate of flow of
subjected to a current above its amp rating, it will open the circuit after a
predetermined period of time.
Amp squared seconds, l2t —The measure of heat energy developed
within a circuit during the fuse’s clearing. It can be expressed as
“Melting I2t”, “Arcing I2t” or the sum of them as “Clearing l2t”. “l” stands
for effective let-through current (RMS), which is squared, and “t” stands
for time of opening, in seconds.
Arcing time — The amount of time from the instant the fuse link has
melted until the overcurrent is interrupted, or cleared.
Breaking capacity — (See Interrupting rating)
Cartridge fuse — A fuse consisting of a current responsive element
inside a fuse tube with terminals on both ends.
Class CC fuse — 600 V, 200 kA amp interrupting rating, branch
circuit fuses with overall dimensions of 13/32” x 1-1/2”. Their design
incorporates a rejection feature that allows them to be inserted into
rejection fuse holders and fuse blocks that reject all lower voltage, lower
interrupting rating 13/32” x 1-1/2” fuses. They are available from 1/10
through 30 amps.
Class CF fuse — A finger-safe UL Listed branch circuit rated fuse.
Available in time-delay or fast-acting versions, the Class CF fuse has
Class J electrical performance and is available in ratings from 1 to 100 A
in 30, 60 and 100 A case sizes.
Class G fuse — A size rejecting branch circuit fuse in ratings from
1/2 through 20 amps (600 Vac) and 25 through 60 amps (480 Vac) with
a 100 kA interrupting rating. The size rejecting feature helps to eliminate
overfusing. The fuse diameter is 13/32” while the length varies from
1-5/16” to 2-1/4”.
specifications and electrical performance requirements for fuses with
voltage ratings of 600 V or less. These are known as standards. If a type
of fuse meets the requirements of a standard, it can fall into that class.
Typical UL branch circuit fuse classes are CC, CF, G, H, J, K, L, RK1, RK5
and T.
Clearing time — The total time between the beginning of the
overcurrent and the final opening of the circuit at rated voltage by an
overcurrent protective device. Clearing time is the total of the melting
time and the arcing time.
Current limitation — A fuse operation relating to short-circuits only.
When a fuse operates in its current-limiting range, it will clear a shortcircuit in less than 1/2 cycle. Also, it will limit the instantaneous peak letthrough current to a value substantially less than that obtainable in the
same circuit if that fuse were replaced with a solid conductor of equal
impedance.
Dual-element fuse — A fuse with a special design that utilizes two
individual-elements in series inside the fuse tube. One element, the
spring actuated trigger assembly, operates on overloads up to 5 - 6 times
the fuse current rating. The other element, the short-circuit section,
operates on short-circuits up to its interrupting rating.
Electrical load — The part of the electrical system that actually uses
the energy or does the work required.
Fast-acting fuse — A fuse that opens on overload and short-circuits
very quickly. This type of fuse is not designed to withstand temporary
overload currents associated with some electrical loads, when sized near
the full load current of the circuit.
Fault current — Fault currents can be short-circuit currents, ground
fault currents or arcing fault currents.
Class H fuse — 250 V and 600 V, 10 kA interrupting rating branch
Fuse — An overcurrent protective device with a fusible link that
operates and opens the circuit on an overcurrent condition.
Class J fuse — These rejection style fuses are rated to interrupt a
High speed fuse — A fuse with no intentional time-delay in the
overload range and designed to open as quickly as possible in the shortcircuit range. These fuses are often used to protect solid-state devices.
circuit fuses that may be renewable or non-renewable. These are
available in ratings from 70 through 600 amps.
minimum of 200 kA AC. They are labeled as “current-limiting”, are rated
for 600 Vac and are not interchangeable with other classes. They are
available from 1 through 600 amps.
Class K fuses — These are fuses listed as K-1, K-5, or K-9 fuses. Each
subclass has designated I2t and lp maximums. These are dimensionally
the same as Class H fuses, and they can have interrupting ratings of 50
kA, 100 kA, or 200 kA. While these fuses are current-limiting, they are
not marked “current-limiting” on their label since they do not have a
rejection feature.
Class L fuse — These fuses are rated for 601 through 6000 amps, and
are rated to interrupt a minimum of 200 kA AC. They are labeled “currentlimiting” and are rated for 600 Vac. They are intended to be bolted into
their mountings and are not normally used in clips. Some Class L fuses
have designed-in time-delay features for all purpose use.
Class R fuse — These are high performance fuses rated 1/10 through
600 amps in 250 V and 600 V ratings. All are marked “current-limiting”
on their label and all have a minimum of 200 kA interrupting rating. They
have identical outline dimensions with the Class H fuses but have a
rejection feature that prevents the user from mounting a fuse of lesser
capabilities (lower interrupting capacity) when used with special Class R
Clips. Class R fuses will fit into either rejection or non-rejection clips.
16-6
Inductive load — An electrical load which pulls a large amount of
current – an inrush current – when first energized. After a few cycles or
seconds, the current “settles down” to the full-load running current.
Interrupting rating — The rating which defines a fuse’s ability to
safely interrupt and clear short-circuits. This rating is much greater than
the amp rating of a fuse. The NEC defines interrupting rating as “The
highest current at rated voltage that an overcurrent protective device is
intended to interrupt under standard test conditions.”
Melting time — The amount of time required to melt the fuse link
during a specified overcurrent. (See arcing time and clearing time.)
“NEC” Dimensions — These are dimensions once referenced
in the NEC. They are common to Class H and K fuses and provide
interchangeability between manufacturers for fuses and fusible
equipment of given amp and voltage ratings.
Ohm — The unit of measure for electric resistance. An ohm is the
amount of resistance that will allow one amp to flow under a pressure of
one volt.
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
Fuse and fuse block cross reference, and index — 16
Ohm’s Law — The relationship between voltage, current, and
resistance, expressed by the equation E = IR, where E is the voltage in
volts, I is the current in amps, and R is the resistance in ohms.
One time fuse — Generic term used to describe a Class H nonrenewable cartridge fuse, with a single-element.
Overcurrent — Any current in excess of the rated current of
equipment or the ampacity of a conductor. It may result from overload,
short-circuit or ground fault. (Ref. NEC Article 100.)
Overload — Operation of equipment in excess of normal, full load
rating, or of a conductor in excess of rated ampacity that, when
it persists for a sufficient length of time, would cause damage or
dangerous overheating. A fault, such as a short-circuit or ground fault, is
not an overload. (Ref. NEC Article 100.)
Peak let-through current, lp — The instantaneous value of peak current let-through by a current-limiting fuse, when it operates in its currentlimiting range.
Renewable fuse (600 V and below) — A fuse in which the
element, typically a zinc link, may be replaced after the fuse has opened,
and then reused. Renewable fuses are made to Class H standards.
Resistive load — An electrical load which is characteristic of not
having any significant inrush current. When a resistive load is energized,
the current rises instantly to its steady-state value, without first rising to
a higher value.
RMS current — The RMS (root-mean-square) value of any periodic
current is equal to the value of the direct current which, flowing through
a resistance, produces the same heating affect in the resistance as the
periodic current does.
Short-circuit current rating (SCCR) — This term applies to
components (single devices) and assemblies (equipment). For the
component, it is the maximum fault current it can sustain without the
occurrence of excessive damage. For equipment, it is the assembly’s
rating, generally limited by the lowest component SCCR in the circuit as
determined by an approved method such as UL 508A, Supplement SB.
Short-circuit withstand — The maximum current that an
unprotected electrical component can sustain for a specified period of
time without the occurrence of extensive damage. Typically applies to
devices or components that do not have a marked short-circuit current
rating, such as conductors, transfer switches or semiconductor devices.
Single-phasing — The condition that occurs when one phase of a
three-phase system opens, either in a low voltage (secondary) or high
voltage (primary) distribution system. Primary or secondary singlephasing can be caused by any number of events. This condition results
in unbalanced currents in polyphase motors and unless protective
measures are taken, may cause overheating and failure.
Threshold current — The symmetrical RMS (root mean square)
available current at the threshold of the current-limiting range, where
the fuse becomes current-limiting when tested to the industry standard.
This value can be read off a peak let-through chart where the fuse curve
intersects the A—B line. A threshold ratio is the relationship of the
threshold current to the fuse’s continuous current rating.
Time-delay fuse — A fuse with a built-in delay that allows temporary
and harmless inrush currents to pass without opening, but is so
designed to open on sustained overloads and short-circuits.
Voltage rating — The maximum open circuit voltage in which a fuse
can be used, yet safely interrupt an overcurrent. Exceeding the voltage
rating of a fuse impairs its ability to clear an overload or short-circuit
safely.
Semiconductor fuse — Fuses used to protect solid-state devices.
See “high speed fuse.”
Short-circuit — Can be classified as an overcurrent which exceeds
the normal full load current of a circuit by a factor many times (tens,
hundreds or thousands greater). Also characteristic of this type of
overcurrent is that it leaves the normal current carrying path of the circuit
– it takes a “short cut” around the load and back to the source.
To find
Amps when kVA is known
Amps when horsepower is known
Amps when kilowatts are known
Kilowatts
Kilovolt-amps
Horsepower
Watts
Single-phase
kVA x 1000
E
Hp x 746
E x % eff. x pf
kW x 1000
E x pf
I x E x pf
1000
IxE
1000
I x E % eff. x pf
746
E x I x pf
Energy efficiency
Power factor (pf)
Power consumed
Apparent power
=
Two-phase
kVA x 1000
Ex2
Hp x 746
E x 2 x % eff. x pf
kW x 1000
E x 2 pf
I x E x 2 x pf
1000
IxEx2
1000
I x E x 2 x % eff. x pf
746
I x E x 2 x pf
Load horsepower x 746
Load input kVA x 1000
W
or
VA
Three-phase
kVA x 1000
E x 1.73
Hp x 746
E x 1.73 x % eff. x pf
kW x 1000
E x 1.73 x pf
I x E x 1.73 x pf
1000
I x E x 1.73
1000
I x E x 1.73 x % eff. x pf
746
I x E x 1.73 x pf
kW
kVA
Direct current
Not applicable
Hp x 746
E x % eff.
kW x 1000
E
IxE
1000
Not applicable
I x E x % eff.
746
ExI
= cosØ
Where: I = Amps, E = Volts, Hp = Horsepower, kVA = Kilovolt-amps, kW = Kilowatts, pf = Power factor, % eff. = Percent efficiency
BUSSMANN SERIES FULL LINE CATALOG 1007 — OCTOBER 2018
Eaton.com/bussmannseries
16-7
Cross reference
and index
Electrical formulas
16 — Fuse and fuse block cross reference, and index
FuseFinder fuse and fuse block cross reference
Eaton, the leader in circuit protection, power management and
electrical safety offers an extensive selection of Bussmann series
fuses and fuse blocks to meet your overcurrent protection needs.
If you need to find a replacement to another manufacturer's glass
tube, low voltage branch and supplemental or high speed fuse, or
fuse block or holder, use this quick cross reference FuseFinder to
identify the Bussmann series replacement.
If you cannot find a product cross, more extensive listings are
available online at Eaton.com/bussmannseries/FuseFinder.
Or email our Application Engineers at FuseTech@Eaton.com.
Fuse cross reference
Competitor
0481(amp)
211(amp)
212(amp)
213(amp)
215(amp)
216(amp)
217(amp)
218(amp)
221(amp)
226(amp)
227(amp)
228(amp)
230(amp)
235(amp)
236(amp)
238(amp)
239(amp)
257(amp)
297(amp) [auto fuse]
299(amp)
2AG220
2AG230
301(amp)
303(amp)
307(amp)
311(amp)
312(amp)
313(amp)
314(amp)
315(amp)
318(amp)
322(amp)
323(amp)
324(amp)
325(amp)
326(amp)
Bussmann series
GMT-(amp)A
GDC-(amp)
GDB-(amp)
GDC-(amp)
S505-(amp)
GDA-(amp)
GDB-(amp)
GDC-(amp)
S505-V-(amp)
GDA-V-(amp)
GDB-V-(amp)
GDC-V-(amp)
C515-(amp)
GMA-(amp)
GMA-V-(amp)
GMD-V-(amp)
GMD-(amp)
ATC-(amp)
ATM-(amp)
MAX-(amp)
C517-(amp)
C515-(amp)
AGA-(amp)
AGW-(amp)
SFE-(amp)
AGC-(amp)
AGC-(amp)
MDL-(amp)
ABC-(amp)
MDL-V-(amp)
AGC-V-(amp)
GBB-(amp)
MDA-(amp)
ABC-V-(amp)
MDA-V-(amp)
MDA-(amp)
Competitor
413(amp)
414(amp)
417(amp)
418(amp)
429(amp)
431(amp)
5140(amp)
5170(amp)
523(amp)
5HF(amp)
5HFP(amp)
5HT(amp)
5MF(amp)
5MFP(amp)
5SF(amp)
5ST(amp)
6J(amp)X
6R(amp)D
702(amp)
703(amp)
81200(amp)ST
A70P(amp)-1 or Type 1
A70P(amp)-4 or Type 4
A70Q(amp)-4 or Type 4
A70QS(amp)-14F
A70QS(amp)-22F
A70QS [35-200]-4
A70QS [225-400]-4 or 4K
A70QS [450-600]-4K
A70QS [700-800]-4
A50P(amp)-1
A50P(amp)-4
A50QS(amp)-4 or Type 4
A30QS(amp)-1 or Type 1
A30QS [35-700]-4 or Type 4
A30QS [1000-1200]-128
Bussmann series
MDM-(amp)
ABS-(amp)
ABS-(amp)
TR/3216FF-(amp)
3216FF(amp)
0603FA(amp)
BAF-(amp)
AGU-(amp)
FNM-(amp)
GDA-(amp)
GDA-V-(amp)
S505-(amp)A
GMA-(amp)
GMA-V-(amp)
GDB-(amp)
GDC-(amp)
KTK-(amp)
LPS-RK-(amp)SP
HVJ-(amp)
HVL-(amp)
CBS-(amp)
FWP-(amp)A14F
FWP-(amp)A orB
FWP-(amp)A or B
FWP-(amp)A14F
FWP-(amp)A22F
FWP-(amp)A or B
FWP-(amp)A or B
FWP-(amp)A or B
FWP-(amp)A or B
FWH-(amp)A14F
FWH-(amp)A or B
FWH-(amp)A or B
FWX-(amp)A14F
FWX-(amp)A
FWX-(amp)AH
Bussmann series
KTK-R(amp)
FNQ-(amp)
FNQ-R-(amp)
ABC-(amp)
GDB-(amp)
GDC-(amp)
MDL-(amp)
AGC-(amp)
AGX-(amp)
BAF-(amp)
BAN-(amp)
BBS-(amp)
GDA-(amp)
HBO-(amp)
ACK-(amp)
ACL-(amp)
KGJ-E-(amp)
KGJ-(amp)
LP-CC(amp)
CDN(amp)††
CDS(amp)†††
ANL-(amp)
ANN-(amp)
PV-(amp)A10F
(amp)FC
(amp)FE
(amp)FET
(amp)FM
(amp)FMM
(amp)LCT
(amp)LET
(amp)LMMT
(amp)LMT
FWJ-(amp)A14F
FWJ-(amp)
FWA-(amp)A
FWA-(amp)A21F
FWA-(amp)B
LPN-RK(amp)SP
KTN-R(amp)
JJN(amp)
KRP-CL-(amp)
KRP-C-(amp)SP
KLU [601-4000]
KLU(amp)
JKS(amp)
LPS-RK(amp)SP
Competitor
ATMR(amp)
ATQ(amp)
ATQR(amp)
BBC(amp)
BDB(amp)
BDC(amp)
BDL(amp)
BGC(amp)
BGX(amp)
BLF(amp)
BLN(amp)
BLS(amp)
BMA(amp)
CBO(amp) [4-160A]
CCK(amp) [1-300A]
CCL(amp) [30-100A]
CCLB(amp) [20-250A]
CCLW(amp) [1-300A]
CCMR [1-30A Only]
CDNC(amp)
CDSC(amp)
CNL(amp)
CNN(amp)
DCT [1-15A]
E(amp)FC
E(amp)FE
E(amp)FET
E(amp)FM
E(amp)FMM
E(amp)LCT [6-20A]
E(amp)LET [25-180A]
E(amp)LMMT [315-900A]
E(amp)LMT [160-450A]
E100SF(amp) [20-30A]
E100S(amp) [40-2000A]
E15S(amp) [35-3000A]
E15SF(amp) [5, 10, 15, 20,
25, 30A]
E25S(amp) [1000-2500A]
E25S(amp) [35-800A]
E25SFX(amp) [5-30A]
E50S(amp)
E50SF(amp) [5-30A]
E70S(amp)
ECK(amp) [1-300A]
ECL(amp) [30-100A]
ECN(amp)
ECNR(amp)
ECS(amp)
334(amp)
GLD-(amp)
A15QS [1-30]-2
FWA-(amp)A10F
336(amp)
361(amp)
362(amp)
3770(amp)
3780(amp)
3785(amp)
3AB(amp)
3ABP(amp)
3AG(amp)
3AG311(amp)
3AG312(amp)
GBA-(amp)
AGX-(amp)
AGX-(amp)
SL-(amp)
S-(amp)
T-(amp)
ABC-(amp)
AGC-V-(amp)
AGC-(amp)
AGC-(amp)
AGC-(amp)
A15QS [35-60]-1
A15QS [70-400]-4
A2D(amp)R
A2K(amp)
A3T(amp)
A4BQ [225-600]
A4BQ [601-6000]
A4BT [601-4000]
A4BY(amp)
A4J(amp)
A6D(amp)R
3AG313(amp)
MDL-(amp)
3AG315(amp)
3AG318(amp)
3SB(amp)
3SBP(amp)
401(amp)
411(amp)
MDL-V-(amp)
AGC-V-(amp)
MDL-(amp)
MDL-V-(amp)
GMT-(amp)A
ABS-(amp)
A6K(amp)
KTS-R(amp)
ECSR(amp)
FRS-R-(amp)
A6T(amp)
AG(amp)
AJT(amp)
AM10/(amp)
AOK(amp)
ATDR(amp)
JJS(amp)
SC(amp)
LPJ(amp)SP
LP-CC-(amp)
ALS-(amp)
LP-CC-(amp)
ELR(amp)
ENLE(amp)
ENNE(amp)
ERN(amp)
ERS(amp)
ESA(amp)
GLR-(amp)
ANL-(amp)
ANN-(amp)
REN-(amp)*
RES-(amp)**
S-(amp)
412(amp)
ABS-(amp)
ATM(amp)
KLM(amp)
FA(amp)
SA(amp)
FWA-(amp)A10F
FWX-(amp)AH
FWX-(amp)A
FWX-(amp)14F
FWH-(amp)
FWH-(amp)14F
FWP-(amp)
ACK-(amp)
ACL-(amp)
FRN-R-(amp)
FRN-R-(amp)
FRS-R-(amp)
* >60 A use FRN-R (250 V) ** >60 A use FRS-R (600 V) † >12 A use TL †† 60 A use FRS-R (600 V) † >12 A use TL. ††
工商网监
湘ICP备2023018690号
