F019-W

F019 Low Voltage Dimming ControlTM 0-10V Low Voltage Dimming Control Sales Sheet Page 1 of 2 Package Contents Low Voltage Dimming Control with handle and mounting plate Mounting screws Wire nuts Operation The 0-10V DC Low Voltage Dimming Control is for use with LED lighting products such as the LUXdriveTM A009 BuckBlockTM, A011 FlexBlockTM, 7011 ElaraStrip IITM, 9008 LuxStrip IITM, A006 LuxStrip IITM, 3021/3023 BuckPuckTM LED drivers, and others compatible with a 0-10V current sinking control. Features logarithmic response and reverse polarity protection. ! WARNING: Miswiring Low Voltage Dimming Control could cause permanent damage to dimmer. Do Not connect this control to line voltage. Do Not connect with power applied. Maximum recommended operating current is 25mA. Application Figures A009 BuckBlocksTM, A011 FlexBlocksTM , or a combination of the two: Up to 25 units can be dimmed on a single Low Voltage Dimming Control. When the drivers being controlled are within a few feet of each other, daisy-chain wiring (shown below) is fine. When dimming distant modules, a star wiring pattern (each driver with it’s own run of violet/gray wire back to the dimming control) and 18AWG wire is recommended. Violet Gray Dim GND DIM Vin + Vin LED + LED - Dim GND DIM Vin + Vin LED + LED - Dim GND DIM Vin + Vin LED + LED - F019 A009 A011 A009 LEDdynamics, Inc. 802.728.4533 P 802.728.3800 F sales@LUXdrive.com www.LUXdrive.com ©2016 LUXdriveTM, A Division of LEDdynamics, Inc. www.LUXdrive.com. Specifications subject to change without notice. February, 2016 - Rev 1.5 Made in t he USA Pb RoHS C o m p lia n t 2002/95/EC F019 Low Voltage Dimming ControlTM 0-10V Low Voltage Dimming Control Sales Sheet Page 2 of 2 Application Figures Cont. ElaraStrip II™, 9008 LuxStrip IITM , and A006 LuxStrip IITM: Control up to 50 strips with a single Low Voltage Dimming Control. Vin + Violet Gray A006 shown with A006-HE wiring harness Vin F019 3021/3023 BuckPucksTM or 4015 BoostPucksTM: Control one to four BuckPucksTM or BoostPucksTM with a single Low Voltage Dimming Control. When controlling multiple units, connect the CTRL line of all units to the Dimming Control and connect only one REF line as shown below. + Vin - LED+ + 3021/3023 CTRL Vin LED- REF - LED+ 3021/3023 CTRL REF LED- NC Violet Gray F019 LEDdynamics, Inc. 802.728.4533 P 802.728.3800 F sales@LUXdrive.com www.LUXdrive.com ©2016 LUXdriveTM, A Division of LEDdynamics, Inc. www.LUXdrive.com. Specifications subject to change without notice. February, 2016 - Rev 1.5 Made in t he USA