MEC1-105-02-L-D-RA1-SL 数据手册
REVISION AM
MEC1-1XX-XX-XX-D-RAX-XX-SL-XX
PATENT NUMBER
6159045
"D" REF ■
DO NOT
SCALE FROM
THIS PRINT
C
CARD THICKNESS
*-01: .031 THICK CARD
(USE MEC1-XX-T-D-RAX-X-SL)
(SEE NOTE 9)
-02: .062 THICK CARD
(USE MEC1-XX-S-D-RAX-X-SL)
(SEE NOTE 9)
"E"±.0050 [0.127] ■
.1091 2.770 REF
"F"±.0050 [0.127] ■
C
.0394 1.000
(TOL NON ACCUM)
PLATING
02
"A"
.268 6.81
REF
.050 1.27 REF
"G" REF ■
PACKAGING
BLANK: TUBES (SEE NOTE 11)
-TR: TAPE & REEL (SEE NOTES 12 & 13)
(SUBSTITUTE -T FOR -TR:
DESIGNATION WHEN USING -XM
PLATING DESIGNATION WITH
BOTH -NP AND -SL OPTIONS)
-FR: FULL REEL QTY TAPE & REEL
(SEE NOTES 12 & 13)
(SUBSTITUTE -F FOR -FR:
DESIGNATION WHEN USING -XM
PLATING DESIGNATION WITH
BOTH -NP AND -SL OPTIONS)
(-T OR -TR, -F OR -FR OPTION NOT
AVAILABLE FOR 70 POS)
No OF POSITIONS
-05, -08, -20, -30, -40, -50 (SEE FIG 1)
-60 & -70 (SEE FIG 2, SHT 3)
(PER ROW)
"A" REF
01
"A"
-F: 3μ" FLASH GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-L: 10μ" LIGHT GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-S: 30μ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-FM: 3μ" FLASH GOLD IN CONATACT AREA,
MATTE ON TIN TAIL
-LM: 10μ" LIGHT IN CONTACT AREA,
MATTE TIN ON TAIL
-SM: 30μ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
SOLDER LOCKS
NON-POLARIZED OPTION
-NP: NO POLARIZED POSITION
(ONLY AVAILABLE ON -05,
-08, -20, & -30 POSITIONS)
(SEE FIG 4, SHT 3)
-BLANK: BODY IS POLARIZED
.026 0.66 REF
.070 1.78
REF
"H" REF ■
MEC1-XX-X-D-RA1-X-SL
TAIL OPTION
-RA1: STANDARD
-RA2: ELEVATED (SEE FIG 3, SHT 3)
ROW SPECIFICATION
-D: DOUBLE (USE MEC1-XX-X-D-RAX-X-SL)
* = FOR EXISTING CUSTOMERS ONLY
"J" REF ■
.125 3.18 REF
.350 8.89
REF
.460 11.68
REF
C
.059 1.50
.0394±.0020 1.000±0.051
(TOL NON ACCUM)
C
NOTES:
C
"E" .0050[0.127] ■
FIG 1
MEC1-120-02-XX-D-RA1-SL SHOWN
1. C REPRESENTS A CRITICAL DIMENSION.
■= SEE TABLE 3, SHT 2
2. MAXIMUM BURR ALLOWANCE: .004[0.10]
3. MINIMUM PUSHOUT FORCE: .5 LB
4. TAIL OPTION -RA1 TO HAVE C-150-01-XX-X CONTACT FULLY PRE-FORMED.
5. BODIES TO BE LAYER PACKAGED FOR TRANSIT BETWEEN INVENTORY AND PRODUCTION.
6. TO BE MEASURED AT 2 MAIN 90 BENDS.
7. MEASURE FIRST AND LAST PIN OF EACH ROW.
8. NOTE DELETED.
9. MATING EDGE CARD THICKNESS TOLERANCE TO BE ±10% OF NOMINAL FOR -01; ±7.5% FOR -02.
10. NOTE DELETED.
11. TUBES ARE STANDARD PACKAGING.
12. ORDERS WILL BE PACKAGED ACCORDING TO THE SAMTEC PACKAGING EFFICIENCY
STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM.
13. ATTACH LABEL-4X2 TO EACH REEL.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01 [0.3]
2
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
FLAMMABILITY RATING: UL 94V-0
SHEET SCALE: 2:1
INSULATOR: LCP
-01: COLOR: NATURAL
-02: COLOR: BLACK
CONTACT: PHOS BRONZE
F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
1mm MEC1 -RA ASSEMBLY
DWG. NO.
MEC1-1XX-XX-XX-D-RAX-XX-SL-XX
BY: MARKS
01/25/00
SHEET 1 OF 5
REVISION AM
C-150-XX-X-P
(SEE TABLE 4)
"B"
(SEE TABLE 1, SHT 1)
.320 8.13 REF
.170 4.31
REF
+.007[0.18]
C "C" - .005[0.13]
(SEE TABLE 1, SHT 1)
0°+-5°
3°
'B'
C
'C'
.134 3.40 REF
C
C
-A-
.0015±.0020 0.038±0.051
SEE TABLE 2, SHT 1
(BOTTOM ROW, TOP ROW
& FRONT EDGE OF BODY)
A1
C-150-XX-X-P
(SEE TABLE 4)
A2
DETAIL 'B'
BOTTOM ROW TAIL
.036 0.91 (TYP)
C
C
C
0°+-5°
3°
.396 10.06
C
.471 11.96
SECTION "A"-"A"
C
+0.08
.002+-.003
.002 0.05 - 0.05
DETAIL 'C'
TOP ROW TAIL
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
1mm MEC1 -RA ASSEMBLY
DWG. NO.
MEC1-1XX-XX-XX-D-RAX-XX-SL-XX
BY: MARKS
01/25/00 SHEET 2 OF 5
F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRW
REVISION AM
.026 0.66 REF
"G" REF
(SEE TABLE 3, SHT 2)
"L" REF
.026 0.66 REF
"K"±.0050[0.127]
"F"±.0050[0.127]
(SEE TABLE 3, SHT 2)
FIG 4
MEC1-120-02-XX-D-RA1-NP-SL SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
C
"E"±.0050[0.127]
(SEE TABLE 3, SHT 2)
FIG 2
MEC1-160-02-XX-D-RA1-SL SHOWN
(-60 & -70 POSITION ONLY)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
PACKAGING VIEW
C-150-XX-X-P
(SEE TABLE 4, SHT 2)
-RA2 TAIL OPTION
-RA1 TAIL OPTION
"D"
.354 8.98
REF
.216 5.49
REF
"D"
TUBE: PT-1-24-02-106
PLUG: TP-13
TUBE: PT-1-24-01-106
PLUG: TP-07
MEC1-XX-X-D-RA2-SL-X
C-150-XX-X-P
(SEE TABLE 4, SHT 2)
FIG 3
MEC1-120-02-XX-D-RA2-SL SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
SECTION "D"-"D"
SCALE 4 : 1
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
1mm MEC1 -RA ASSEMBLY
DWG. NO.
MEC1-1XX-XX-XX-D-RAX-XX-SL-XX
BY: MARKS
01/25/00 SHEET 3 OF 5
F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRW
REVISION AM
C
+0.15
.1230+-.006
.002 3.124 - 0.05
(SEE NOTE 7)
C-150-XX-X-P
(SEE TABLE 4, SHT 2)
90°
.0100 0.254
C
.010 0.25
90°+-2°
5°
C
R.0060 0.152
(2 PLCS)
IN-PROCESS 3
(FILL BOTTOM ROW)
C
+.005[0.127]
-.002[0.051]
+.008[0.203]
-.002[0.051]
IN-PROCESS 2
(FORM BOTTOM ROW)
(C-150-05-X-P SHOWN)
(-RA2 ONLY)
C
+5°
-3°
C
.013±.003 0.32±0.08
"N"
(SEE NOTE 7)
"P" REF
C
C
90°
.036 0.91
'E'
R.0060 0.152
(2 PLCS)
.396 10.06
C
"M"
"Q"
C
IN-PROCESS 4
(SHEAR BOTTOM ROW)
IN-PROCESS 6
(FORM TOP ROW)
(C-150-06-X-P SHOWN)
IN-PROCESS 1 & 5
(COMB CUT CONTACT)
*
C
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
.0015±.0020 0.038±0.051
DO NOT SCALE DRAWING
DETAIL 'E'
SCALE 8 : 1
SHEET SCALE: 4:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
1mm MEC1 -RA ASSEMBLY
DWG. NO.
MEC1-1XX-XX-XX-D-RAX-XX-SL-XX
BY: MARKS
01/25/00
F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRW
SHEET 4 OF 5
REVISION AM
.442 11.23
.013 0.32 (TYP)
.010 0.25
C-150-XX-X-P
(SEE TABLE 4, SHT 2)
'F'
'G'
-RA2
.024 0.61
-RA1
.085 2.16
.025 0.64 (TYP)
.063 1.59
.035 0.89
C
DETAIL 'F'
SCALE 8 : 1
IN-PROCESS 7
(FILL TOP ROW)
DETAIL 'G'
SCALE 8 : 1
IN PROCESS 8
HEAT STAKE TOP ROW
C
C
+0.08
.002+-.003
.002 0.04 - 0.05
.036 0.91
'H'
.471 11.96
C
IN-PROCESS 9
(SHEAR TOP ROW)
DETAIL 'H'
SCALE 8 : 1
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
1mm MEC1 -RA ASSEMBLY
DWG. NO.
MEC1-1XX-XX-XX-D-RAX-XX-SL-XX
BY: MARKS
01/25/00
F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRW
SHEET 5 OF 5
