CONSMA008

REVISIONS REV DESCRIPTION A INITIAL RELEASE OF LINX INTERNAL DRAWING 1/4"-36UNS-2A THREADS 6.30 0.248 4X Ø0.45 DIMPLE EQUALLY SPACED 1.30 0.051 10.42 0.410 12.00 0.472 1.68 0.066 HEX 8.0 10.20 0.402 NUT 4X 5.05 0.199 4.20 0.165 CLL 1.05 0.041 NOTES: (UNLESS OTHERWISE SPECIFIED) 1. ALL DIMENSIONS ARE IN mm [INCHES]. 17.68 2. DIMENSIONS APPLY AFTER FINISHING. 0.696 3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE, USE MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES OF VERY HIGH CONCERN >1000ppm, AND USE DRC CONFLICT-FREE SOURCED MATERIALS. 4. SAFETY BREAK ALL SHARP CORNERS AND EDGES 0.5 MAXIMUM. 5 SEE TABLE I FOR ELECTRICAL SPECIFICATIONS. (SHEET 2) 0.50 0.020 6 SEE TABLE II FOR ENVIRONMENTAL SPECIFICATIONS. (SHEET 2) 7 SEE TABLE III FOR MECHANICAL SPECIFICATIONS. (SHEET 2) 8. SEE PARTSLIST. "*" INDICATES FINISH TYPE. WARNING: THIS DRAWING CONTAINS PROPRIETARY INFORMATION 159 ORT LANE THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE MERLIN, OR 97532 TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS DESIGNATED AGENTS. MATERIAL: SCALE 1 : 1 01/MAR/19 4.00 0.157 3.80 0.150 1.25 0.049 APPV 4X 1.50 0.059 7.00 0.276 0.82 0.032 DATE WASHER FINISH: TOLERANCES: 0.50 [.020]-5.00 [.200]= 0.20 [.008] 5.00 [.200]-30.00 [1.200]= 0.40 [.016] 30.0 [1.20]-120.0 [4.75]= 0.60 [0.24] 120.0 [4.75]-315.0 [12.40]= 1.0 [.040] DRAWN: M. SCHULTE PROJECTION: ANGLES: 1 DT: 21/JAN/19 ENGR: D. VARATHARAJAN DT: 08/MAR/19 TITLE: SMA FEMALE PCB MOUNT EXTENDED SIZE DWG. NO. A CONSMA008-* SCALE: 4:1 DO NOT SCALE DRAWING REV A SHEET 1 OF 2 LDCFDAL_C 5 SEE SHEET 1 FOR REVISIONS TABLE I 5.10 0.201 6 TABLE II 5.10 0.201 4X 1.50 0.059 1.40 0.055 RECOMMENDED FOOTPRINT 7 TABLE III SIZE DWG. NO. A REV CONSMA008-* SCALE: 4:1 DO NOT SCALE DRAWING A SHEET 2 OF 2 LDCFDAL_A