CONSMA002-L

REVISIONS REV DESCRIPTION A INITIAL RELEASE OF LINX INTERNAL DRAWING 6.60 0.260 7.00 0.276 4X 1.00 0.039 4.10 0.161 4X 1.45 0.057 1.60 0.063 HEX 8.0 SCALE 1 : 1 10.20 0.402 NUT APPV 01/MAR/19 CLL FLAT 5.80 0.228 1/4"-36UNS-2A THREADS 11.40 0.449 DATE 13.90 0.547 1.20 0.047 3.90 0.154 1.24 0.049 NOTES: (UNLESS OTHERWISE SPECIFIED) 1. ALL DIMENSIONS ARE IN mm [INCHES]. 2. DIMENSIONS APPLY AFTER FINISHING. 3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE, USE MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES OF VERY HIGH CONCERN >1000ppm, AND USE DRC CONFLICT-FREE SOURCED MATERIALS. 19.50 4. SAFETY BREAK ALL SHARP CORNERS AND EDGES 0.5 MAXIMUM. 0.768 5 SEE TABLE I FOR ELECTRICAL SPECIFICATIONS. (SHEET 2) 6 SEE TABLE II FOR ENVIRONMENTAL SPECIFICATIONS. (SHEET 2) 0.50 7 SEE TABLE III FOR MECHANICAL SPECIFICATIONS. (SHEET 2) 0.020 8. SEE PARTSLIST. "*" INDICATES FINISH TYPE. WARNING: THIS DRAWING CONTAINS PROPRIETARY INFORMATION 159 ORT LANE THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE MERLIN, OR 97532 TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS WASHER DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS DESIGNATED AGENTS. MATERIAL: FINISH: TOLERANCES: 0.50 [.020]-5.00 [.200]= 0.20 [.008] 5.00 [.200]-30.00 [1.200]= 0.40 [.016] 30.0 [1.20]-120.0 [4.75]= 0.60 [0.24] 120.0 [4.75]-315.0 [12.40]= 1.0 [.040] DRAWN: M. SCHULTE PROJECTION: ANGLES: 1 DT: 23/JAN/19 ENGR: D. VARATHARAJAN DT: 08/MAR/19 TITLE: SMA FEMALE RIGHT ANGLE PCB MOUNT, EXTENDED SIZE DWG. NO. A CONSMA002-L-* SCALE: 3:1 DO NOT SCALE DRAWING REV A SHEET 1 OF 2 LDCFDAL_C 5 SEE SHEET 1 FOR REVISIONS TABLE I 5.10 0.201 5.10 0.201 6 4X 1.50 0.059 1.40 0.055 TABLE II RECOMMENDED FOOTPRINT 6.50 0.256 7 TABLE III 6.00 0.236 RECOMMENDED MOUNTING HOLE SIZE DWG. NO. A REV CONSMA002-L-* SCALE: 4:1 DO NOT SCALE DRAWING A SHEET 2 OF 2 LDCFDAL_A