CONSMA011

REVISIONS REV DESCRIPTION A INITIAL RELEASE OF LINX INTERNAL DRAWING 1/4"-36UNS-2A THREADS PIN CHUCK 0.2x2x2 GROOVE 6.13 0.241 3.90 0.154 BODY SOCKET 9.50 0.374 CRIMP RING 20.00 0.787 5.00 0.197 HEAT SHRINK 14.50 0.571 5.00 0.197 NOTES: (UNLESS OTHERWISE SPECIFIED) 1. ALL DIMENSIONS ARE IN mm [INCHES]. 2. DIMENSIONS APPLY AFTER FINISHING. 3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE, USE MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES OF VERY HIGH CONCERN >1000ppm, AND USE DRC CONFLICT-FREE SOURCED MATERIALS. 4. SAFETY BREAK ALL SHARP CORNERS AND EDGES 0.5 MAXIMUM. 5 SEE TABLE I FOR ELECTRICAL SPECIFICATIONS. (SHEET 2) 6 SEE TABLE II FOR ENVIRONMENTAL SPECIFICATIONS. (SHEET 2) 7 SEE TABLE III FOR MECHANICAL SPECIFICATIONS. (SHEET 2) 8. SEE PARTSLIST. "*" INDICATES FINISH TYPE. THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS DESIGNATED AGENTS. SCALE 1 : 1 FINISH: CLL 7.39 0.291 159 ORT LANE MERLIN, OR 97532 WARNING: THIS DRAWING CONTAINS PROPRIETARY INFORMATION MATERIAL: 01/MAR/19 HEX 6.40 0.252 6.40 0.252 SOCKET APPV 2.70 0.106 5.30 0.209 1.29 0.051 DATE TOLERANCES: 0.50 [.020]-5.00 [.200]= 0.20 [.008] 5.00 [.200]-30.00 [1.200]= 0.40 [.016] 30.0 [1.20]-120.0 [4.75]= 0.60 [0.24] 120.0 [4.75]-315.0 [12.40]= 1.0 [.040] DRAWN: M. SCHULTE PROJECTION: ANGLES: 1 DT: 21/JAN/19 ENGR: D. VARATHARAJAN DT: 08/MAR/19 TITLE: SMA FEMALE CABLE END CRIMP FOR RG-174 CABLE SIZE DWG. NO. A REV CONSMA011-* SCALE: 4:1 DO NOT SCALE DRAWING A SHEET 1 OF 2 LDCFDAL_C 5 6 SEE SHEET 1 FOR REVISIONS TABLE I TABLE II ASSEMBLY INSTRUCTIONS 1. Strip cable to recommended dimensions. 2. Slip heat shrink and crimp ring onto stripped cable. 3. Solder the socket to the center-conductor. 4. Insert the socket, center-conductor and insulator into the body. 5. Wrap the braid around the tail of the body and crimp the ring with a 0.128" hex crimp tool (or one labeled for use with RG-174 cable). 6. Use heat shrink to cover crimp. 2.20 0.087 2.30 0.091 5.00 0.197 RG-174 CABLE 7 TABLE III RECOMMENDED CABLE STRIPPING DIMENSIONS CAN ALSO BE USED WITH: RG-188A & RG-316 SIZE DWG. NO. A REV CONSMA011-* SCALE: 5:1 DO NOT SCALE DRAWING A SHEET 2 OF 2 LDCFDAL_A