CONSMA006.031

Description Body Pin Insulation Washer Nut Material Brass Brass PTFE Brass Brass 1/4-36UNS-2A THREADS Finish Nickel Gold N/A Nickel Nickel 0.040 [1.02] REVISIONS REV B DESCRIPTION Updated footprint and dimensions; Added new title block 0.040 [1.02] TOP VIEW FLAT 0.228 [5.80] 0.179 [4.54] 0.039 [1.00] 0.04 [1.02] 0.375 [9.60] 0.160 [4.06] 0.060 [1.52] Ø0.402 [10.20] 0.065 [1.65] 0.160 [4.06] NUT 0.100 [2.54] TOP RECOMMENDED FOOTPRINT Plastic/Metal Case 0.234 [6.00] Ø0.256 [6.50] 0.020 [0.50] Serves as rear flange WASHER RECOMMENDED MOUNTING HOLE THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS DESIGNATED AGENTS. MATERIAL: BOTTOM BACK VIEW MOUNTING METHODS NOTES: (UNLESS OTHERWISE SPECIFIED) 1. ALL DIMENSIONS ARE IN INCHES [mm]. 3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE. 2. DIMENSIONS APPLY AFTER FINISHING. 4. SAFETY BREAK ALL SHARP CORNERS AND EDGES .02 MAXIMUM. : THIS DRAWING CONTAINS PROPRIETARY INFORMATION 159 ORT LANE 0.100 [2.54] 0.200 [5.08] Flange hides hole Ø0.311 [7.90] H0.315 [8.00] 1/4-36UNS-2B THREADS 0.060 [1.52] Clamps into molded case 0.240 [6.10] 0.152 [3.90] SIDE VIEW BPM Clamps into molded case 0.037 [0.94] 0.157 [4.00] 0.075 [1.90] 0.786 [20.40] 29-JUN-12 Ø0.051 [1.30] Ø0.327 [8.30] Ø0.228 [5.80] 0.375 [9.60] APPV Use of nut optional Ø0.051 [1.30] 0.175 [4.50] DATE FINISH: PROJECTION: TOLERANCES: .020 [0.50]-.200 [5.00]= .008 [0.20] .200 [5.00]-1.200 [30.00]= .016 [0.40] 1.20 [30.0]-4.75 [120.0]= .024 [0.60] 4.75 [120.0]-12.40 [315.0]= .040 [1.0] ANGLES: 1 TITLE: MERLIN, OR 97532 SMA FEMALE EDGE MULTI-MOUNT FOR 0.031” THICK BOARD SIZE DWG. NO. DRAWN: B.MURPHY DT: 29-JUN-12 ENGR: S.HOGAN DT: 29-JUN-12 SCALE: 2:1 REV CONSMA006.031 DO NOT SCALE DRAWING B SHEET 1 OF 1 LDCFDLT_A