SMP-PF-P-HH-ST-EM3

REVISION D Pb THIS PRODUCT MANUFACTURED WITH LEAD-FREE PROCESSING DESIGNED & DIMENSIONED IN MILLIMETERS[INCHES] DO NOT SCALE FROM THIS PRINT SMP-PX-P-XX-ST-EM3 TERMINATION -EM3: DROP-IN EDGE MOUNT GENDER -P: PLUG 0.38 .015 REF 2.13 .084 REF 4.43 .174 "A" ORIENTATION -ST: STRAIGHT INTERFACE -F: FULL DETENT -L: LIMITED DETENT -S: SMOOTH BORE PLATING SPECIFICATION (VALUES GIVEN ARE IN MICRO-INCHES) -HE: 30µ" GOLD ON CENTER CONTACT 50µ" GOLD ON OUTER CONTACT -HH: 30µ" GOLD ON CENTER CONTACT 30µ" GOLD ON OUTER CONTACT (SEE TABLE 1 & NOTE 4) TYPE -P: PCB 5.08 .200 REF 6.35 .250 REF 2.29 .090 REF 0.38 .015 REF "A" 4.34 .171 REF RECOMMENDED PCB LAYOUT 4.84 .191 1.88 .074 REF 2.125±0.130 .0837±.0051 1.00 .039 0.51±0.04 .020±.002 4.10 .161 REF 7.35 .289 1 C 4.25 .167 1.52 .060 3.77 .148 2 1.27 .050 0.79 .031 3 (TYP) EDGE OF PCB 5.08 .200 'B' 7.62 .300 0.10±0.10 .004±.004 C NOTES: SECTION "A"-"A" DETAIL 'B' SCALE 10 : 1 1. C REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PUSHOUT FORCE FOR CENTER CONTACT: 6.67N [1.5 LB]. INSULATOR: 6.67N [1.5 LB]. 3. PRODUCT TO BE PACKAGED PER PACKING STANDARD CO-RF-WI-3040-M. TRAY: TY-SMA001-1 COVER: TY-SMA001-2 200 PARTS PER TRAY(2 PARTS PER POCKET) 4. PLATING THICKNESS ON OUTER CONTACT MUST BE 30µ" MIN, TO AVOID REFLOW WICKING. F:\DWG\MISC\MKTG\SMP-PX-P-XX-ST-EM3-MKT.SLDDRW UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS. TOLERANCES ARE: DECIMALS PROPRIETARY NOTE * PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS ANGLES X.X: 0.3 [.01] 5 X.XX: 0.13 [.005] X.XXX: 0.051 [.0020] MATERIAL: * THIS DOCUMENT CONTAINS CONFIDENTIAL AND AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING PIN, SHELL: BRASS DIELECTRIC: PTFE 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY SHEET SCALE: 5:1 DESCRIPTION: SMP EDGE MOUNT PLUG - 50 OHM DWG. NO. SMP-PX-P-XX-ST-EM3 BY: T MEEK 10/29/2010 SHEET 1 OF 1