EN3PQCA

O-RING QC ADAPTER QC ADAPTER PANEL 0.250 EN3 PANEL-MOUNT CONNECTOR (PURCHASED SEPARATELY) 0.690 EN3PQCA INSTALLATION STEPS: 1. INSTALL O-RING IN THE GROOVE AT THE FRONT OF CONNECTOR. 2. ALIGN QC ADAPTER ON CONNECTOR, PUSH IN, AND ROTATE CLOCKWISE UNTIL DETENT ENGAGES. O-RING 3. EN3 PANEL-MOUNT CONNECTOR WITH QC ADAPTER INSTALLED TO BE MATED ONLY WITH EN3 CORD CONNECTOR OVERMOLDED FOR QUICK CONNECT / DISCONNECT APPLICATION. NOTE: TO REVERT BACK TO STANDARD CONNECTOR MATING, REMOVE ONLY THE QC ADAPTER BY ROTATING COUNTERCLOCKWISE. NO NEED TO REMOVE THE O-RING. EN3 CORD CONNECTOR OVERMOLDED FOR QUICK CONNECT / DISCONNECT APPLICATIONS (PURCHASED SEPARATELY) NOTES: CUSTOMER DRAWING 1. DIMENSIONS SHOWN FOR REFERENCE ONLY THIS DRAWING DESCRIBES A DESIGN CONSIDERED PROPRIETARY IN NATURE, DEVELOPED AND MANUFACTURED BY SWITCHCRAFT INC. AND IS RELEASED ON A CONFIDENTIAL BASIS FOR IDENTIFICATION PURPOSES ONLY. 2. MATERIAL: QC ADAPTER - THERMOPLASTIC, LIGHT BEIGE COLOR STANDARD. O-RING - NEOPRENE RUBBER, BLACK COLOR (LUBRICATED WITH SYNTHETIC LUBRICANT) UNLESS OTHERWISE SPECIFIED 1. ALL DIMENSIONS IN INCHES 3. THIS PRODUCT IS RoHS COMPLIANT SIZE FINISH - TWO PLACE DECIMALS 0.02 - THREE PLACE DECIMALS 0.005 SPEC No. FIRST USED ON DATE DRAWN A REV ECO# 26546 ECO NUMBER 05/17/10 DATE REVISIONS PNK BY 04/07/10 SRC APVD WIDTH * DO NOT SCALE DRAWING SolidWorks CAD File * * * B TEMPER * * * MATERIAL SPEC No. * SCALE CHKD PNK PNK 05/17/10 APVD SRC 05/17/10 QC ADAPTER EN3 PANEL-MOUNT , RoHS NAME LBS/M * 2:1 * BY MULT SHEET PART No. 1 OF EN3PQCA 1 REV A