Series 2000 .4375" (11.11mm) Center-to-Center Spacing
Features:
.652
(15,87)
.062
(1,57)
.234
(5,94)
.062
(1,57)
YWY
wire-wrap
terminal
INTERNAL TERMINAL DESIGNATIONS
2000-Y
W .652
.652
(15,87)
wire
clamp
(15,87)
.652
(15,87)
.062
(1,57)
BARRIER STYLE
.062
.062
(1,57)
(1,57)
YSY
solder
terminal
.652
.652 (15,87)
(15,87)
.062
(1,57)
.062
(1,57)
.062
(1,57)
* Other materials available – contact factory or your local
representative for additional information.
.652
.234
(15,87)
(5,94)
3/4 ST
single solder lug
.062
(1,57)
.234
(5,94)
062
1,57)
30
www.curtisind.com
.062
(1,57)
Recognized
.062 under the Components Program of
.234 Underwriters
(1,57) Laboratories, Inc. Standard 1059,
(5,94)
Guide No. XCFR2, File No. E62557.
Guide No. 22.2 No. 158, Report No. LR39186-1.
COMPLIES WITH IEC 947-7-1
Series 2000 Dimensions
Y
printer
circuit
terminal
.062
(1,57)
printed circuit board design with .062" x
.031" solderable tin-plated pin
.652
2000-YSY
solder pin
.062
(15,87)
.062
.234
2000-YWY .234 wire wrap
(1,57)
(1,57)
(5,94)
(5,94)
.062
EXTERNAL TERMINAL DESIGNATIONS
(1,57)
2000
screw
teminal with No. 6-32 plated steel*
screw accepting up to No. 10AWG wire
2000-ST
solderable tin-plated double solder tab
2000-3/4ST
solderable tin-plated single solder tab
2000-W
wire clamp captivated to a No. 6-32 plated
steel screw
.180
(4,57)
ST
double solder lug
1.125
(28,57)
.875
(22,22)
Dual Row
Series 2000 Variations
O.D.
M.D.
.437 Typ.
(11,11)
.185 Dia. Holes (4)
(4,69)
.422
(10,71)
1.60
(40,64)
062
,57)
• Flexible Hi-Temp Thermoplastic Terminal Blocks –
Self-extinguishing types which resist breakage and other
damage (conform to UL94V-0).
• Terminal Flexibility – Ideal for surface mount, sub-panel
or chassis connections in electronic/electrical circuit
applications. One thru 26 terminals.
• Economical Closed-Back Design – No need for costly
insulation strip.
• Broad Wire Range – No. 6-32 external twin screws, UL
recognized for No. 22AWG to No. 10AWG. Variations
include double solder lug, single solder lug, wire wrap,
solder pin and printed circuit pin.
• UL/CSA Electrical Ratings – UL 30A/1100V RMS (1/3
breakdown voltage), CSA rating: 20A/300.
• Recognition and Listing – Various terminal types are UL
recognized and CSA certified.
.031
(.787)
.312
(7,93)
6-32 Terminal
.120 Dia. Mtfg. Holes (4)
Screw
(3,05)
.500
.375 Max. Lug Access
(12,7)
(9,52)
Curtis Industries
A Division of Powers Holdings, Inc.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
Specifications:
2-11 Terminals
.079 Dia. (No. 47 Drill)
12 Terminals and Over
.093 Dia. (No. 42 Drill)
.437 Typ.
(11,11)
2000 Series terminal blocks are ordered by listing a
composite number made up of the model designation in which
the last two digits indicate the number of poles required for
the application. Example: A 2000 10-terminal block becomes
stock number 2010.
Suffixes are used as follows:
ST denotes double solder lug
3/4ST denotes single solder lug
Y denotes printed circuit pin
YSY solder pin
YWY wire wrap
W wire clamp
The 2010 described above, with double solder lug mounting
on 7/16" centers thus converts to stock number 2010-ST. To
specify quick-connect terminals, simply add the style number
required. (See accessories.) May be purchased factoryassembled or as customer-installed accessory.
Number of
Terminals
Mounting
Dimensions
Inches
Metric
(mm)
Overall
Dimensions
Inches
Metric
(mm)
1
.875
22.22
1.235
2
1.312
33.33
1.672
42.48
3
1.750
44.45
2.110
53.59
4
2.187
55.56
2.547
64.70
5
2.625
66.67
2.985
75.81
6
3.062
77.78
3.422
86.93
7
3.500
88.90
3.860
98.04
8
3.937 100.01
4.297 109.15
9
4.375
111.12
4.735 120.26
10
4.812 122.23
5.172 131.38
11
5.250 133.35
5.610 142.49
12
5.687 144.46
6.047 153.60
13
6.125 155.57
6.485 164.71
14
6.562 166.68
6.922 175.83
15
7.000 177.80
7.360 186.94
16
7.437 188.91
7.797 198.05
17
7.875 200.02
8.235 209.16
18
8.312
211.13
8.672 220.28
19
8.750 222.25
9.110 231.39
20
9.187 233.36
9.547 242.50
9.625 244.47
9.985 253.61
21
31.36
22
10.062 255.58 10.422 264.73
23
10.500 266.70 10.860 275.84
24
10.938 277.83
11.299 286.77
25
11.376 288.95
11.736 298.09
26
11.814 300.08 12.174 309.22
BARRIER STYLE
PC BOARD DRILLING DIMENSIONS
How to Order
Dual Row
Center-to-Center Spacing: .4375" (11.11mm)
Wire Range: Up to No. 10AWG (CSA requires use of lugs on
wire larger than No. 16AWG.)
No. of Terminals: 1 thru 26
Voltage Rating:
CSA – 300V
UL – 150V – General Industrial
250V – Commercial Appliance
300V – Limited Energy Industrial
Tightening Torque: Wire Clamp and Wire Binding Screw 12
in.-lbs.
Current Rating: UL: 30 amps CSA: 20 amps
Housing:
Material
Polyphenylene Oxide
Continuous Use
Temp. (UL Index)
110°C (230°F)
Flammability Rating
94V-0
Water Absorption
(24 hrs. % wt. gain) .06%
Chemical Resistance Resistant to inorganic bases
and acids. For organic
substances contact factory for
specific resistance.
Breakdown Voltage:
Terminal - Terminal
4,400V Typ.
Terminal - Ground
7,700V Typ.
Note: Specifications contained herein are subject to change
without notice
Dimensions Shown are ± 0.030"
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
31
Series 1500/2000 Accessories
.806
(20,47)
QUICK-CONNECT TERMINALS
1500/2000 – Available with .187" x .202" quick-connect tabs
for 1500 series; .250" x .032" for 2000 series. Nine styles . . .
tin-plated brass tabs held in place by terminal screws. Up to
six terminations per pole. To order, specify:
1500 Series: Part No. TB11-19
2000 Series: Part No. TB31-39
90°
90%
TB13
Part(1500)
No. TB13
TB33 (2000)
Last digit of part number corresponds
to previous style numbers.
See Table A,
Dim. 3 (2)
.250
(6,35)
1.392
(35,36)
See Table A, Dim 1
1.00
(25,4)
.125
(3,18)
.031
(,787)
.399
45°
TB14Part
(1500)
No. TB14
1.570
45%
Dual Row
TB34 (2000)
.589
(14,96)
.250
(6,35)
.187
(4,75)
See Table A,
Dim. 2
.156 (0) Dia. Hole
Part No. TB11
90°
90%
45%
Part No. TB15
TB15 (1500)
.422
.300±.003
.312
.156
2X ÿ .062
.125
.031
90%
.184
.150
Part (1500)
No. TB16
TB16
TB36 (2000)
+ .005
.367 - .003
1.197
.250
.031
.156
1.318
90°
.625
.088
.088
TB35 (2000)
.994
(25,25)
1.672
.312
1.224
1.049
(26,64)
45°
TB11 (1500)
BARRIER STYLE
.960
.150
See
Table A
Dim. 4
TB31 (2000)
.150
(3,81)
TB37 (2000)
1.307
(33,2)
TB12 (1500)
45°
.243
(6,17)
.826
(20,98)
Part No. TB17
TB17 (1500)
.955
(24,26)
Part No. TB12
45°
No. TB18
TB18Part
(1500)
1.099
45%
TB38 (2000)
1.481
45%
.727
(18,47)
.960
.268
90°
.831
90%
Part No. TB19
TB32 (2000)
32
www.curtisind.com
TB19 (1500)
Curtis Industries
A Division of Powers Holdings, Inc.
TB39 (2000)
Specifications subject to change.
Dimensions are shown for
reference purposes only.
MARKING STRIPS
1500/2000 Pre-punched black fiber . . . mounts under block.
May be imprinted to customer specifications.
To order, specify:
1500 Series – Part No. 247A10-1 thru 22
2000 Series – Part No. 247A11-1 thru 22
1500/2000 – Wire clamp captivated to No.
6-32 screw eliminates need for lugs.
1500 Series – Part No. 058525700
2000 Series – Part No. 058526700
Part No.
68240100
Dual Row
Wire Clamp
Part No. 68245100
Terminal Block Jumpers
COVERS
1500/2000 – Rigid .030" thick self-extinguishing vinyl.
Complete with spring clips for attaching to mounting positions.
To order, specify:
1500 Series – Part No. 247B24-1 thru 26 terminals
2000 Series – Part No. 247B25-1 thru 26 terminals
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
2000 – Plated brass in two styles. Types 267A28 is designed
to jump two adjacent terminals as it is channeled to cross
over the barrier top. “Rooster comb” design of Type 267A42
permits connections of two to 18 poles.
To order, specify: Part No. 267A42 (plus no. of poles)
Example: 267A42-18
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
BARRIER STYLE
1500 – Jumper is constructed of plated brass. “Rooster
comb” design permits connections of two to 10 poles.
To order, specify: Part No. 278-A11 (plus no. of poles)
Example: 278A11-10
Part No. 68240100 (Holes) or 68245100 (slots)
(2-pole jumper for 1500 only)
33