COND36600FM

Conductive Floor Mat for Hard Floors Homogeneous conductive rubber construction of the Conductive Floor Mat for Hard Floors ensures rapid discharge from personnel wearing heel grounders. The low profile reduces trip hazards and is preferred for use with rolling carts or chairs. This mat is reversible. Conductive Floor Mat meets the ANSI/ESD S20.20 flooring required limit tested per ANSI/ESD STM7.1 and ESD TR53, and is suitable as the flooring component of a Footwear / Flooring personnel grounding system tested per ANSI/ESD STM97.1. Made in the United States of America Mat Item Numbers Size 48" x 72" (1.2 m x 1.8 m) Mat Kit Item Numbers Black COND4872FM Mat Includes: 1 Mat, size as specified 2 3034 Snap Fasteners (installed) Size Black 36" x 60" (0.9 m x 1.5 m) COND3660FM-F 48" x 72" (1.2 m x 1.8 m) COND4872FM-F Mat Kit Includes: 1 Mat, size as specified 1 FGC151M 15' (4.6 m) Ground Cord 2 3034 Snap Fasteners (installed) Roll Item Numbers Size Specifications Typical Value Test Method Resistance to Ground point (Rtg) Resistance Top to Top (Rtt) ≤105 ohms ≤105 ohms ANSI/ESD STM7.1 ANSI/ESD STM7.1 Thickness* 0.060" Color* Black Tolerance Width ± 0.250" Length ± 0.250" Black 2' x 50' (0.6 m x 15.2 m) COND24600FM 3' x 50' (0.9 m x 15.2 m) COND36600FM 4' x 50' (1.2 m x 15.2 m) COND48600FM Roll Includes: 1 Roll of matting material, size as specified *Color, texture and thickness may vary between lots and mills. Specifications and procedures subject to change without notice. CONDUCTIVE FLOOR MAT FOR HARD FLOORS 926 JR Industrial Drive, Sanford, NC 27332 WEB SITE: StaticControl.com PHONE (919) 718-0000 © 2016 DESCO INDUSTRIES INC. Employee Owned FGC151M DRAWING NUMBER CONDFM DATE November 2016