NL1011T-01AC

Technical Data Sheet for NL1011T Single-Stage Thermoelectric Module NOMINAL PERFORMANCE IN NITROGEN Hot Side Temperature (°C) Δ Tmax (°C): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): PRODUCT FEATURES • • • • • 27 61 1.0 1.0 2.0 1.80 50 69 1.3 1.0 2.3 -- ORDERING OPTIONS RoHS EU Compliant Rated operating temperature of 85°C Maximum process temperature of 120°C Ceramic Material: Aluminum Oxide (AC) -01AC, -02AC: Exterior metallization is Au flash, suitable for soldering. Model Number NL1011T-01AC NL1011T-02AC NL1011T-03AC Description Both Surfaces are Metallized Hot Side Exterior is Metallized No Metallization OPERATION CAUTIONS INSTALLATION For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide. II-VI Marlow – Dallas, TX USA 214-340-4900 877-627-5691 marlow.sales@ii-vi.com Marlow Industries Europe GmbH - Germany +49 (0) 6150 5439 - 403 info@marlow-europe.eu II-VI Japan Inc. 81 43 297 2693 (tel) center@ii-vi.co.jp www.ii-vi.co.jp II-VI Singapore Pte., Ltd. (65) 6481 8215 (tel) info@ii-vi.com.sg Marlow Industries China, II-VI Technologies Beijing 86-10-643 98226 info@iivibj.com DOC # 102-0290 REV J - PAGE 1 OF 2 www.marlow.com Hot Side Temperature 50°C Hot Side Temperature 27°C HEAT LOAD (WATTS) 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 40.0 20.0 0.0 2.0 1.6 1.2 0.8 0.4 0.0 0.0 Q=0 T=0 0.2 0.4 0.6 0.8 1.0 CURRENT (AMPS) 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 60.0 T (C) T (C) 60.0 HEAT LOAD (WATTS) 80.0 40.0 20.0 0.0 VOLTAGE (VDC) 80.0 VOLTAGE (VDC) TYPICAL PERFORMANCE CURVES ENVIRONMENT: ONE ATMOSPHERE DRY NITROGEN 1.2 2.0 1.6 1.2 0.8 Q=0 T=0 0.4 0.0 0.0 0.2 0.4 0.6 0.8 1.0 CURRENT (AMPS) 1.2 MECHANICAL CHARACTERISTICS For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, contact one of our Applications Engineers at 877-627-5691. All units are in millimeters, inches are in []. For customer support or general questions please contact a local office or visit our website at www.marlow.com. Marlow reserves the right to make product changes without notice. DOC # 102-0290 REV J - PAGE 2 OF 2 www.marlow.com